紧固件料号对照表

合集下载

标准紧固件号对照表

BoltsScrewsStudsNutsWashersSetScrews Tapping ScrewsPins KeysRetain ing Insert sRivets等效等效参考参考参考参考参考等效等效GB798-88 GB825-88GB/T5782-2000GB/T5785-2000GB27-88GB/T5787-86GB/T14-98DIN580 - Lifting eyeboltsISO8765 - Hexagon head bolts, with fine pitch thr DIN609 - Hexagon fit boltsDIN444 - Eyebolts DIN603 - Round head square neck bolts ISO7045 - Crossed recessed pan head screws ISO7046 - Crossed recessed csunk flat head screwsISO4014 - Hexagon head boltsDIN7968 - Hexagon fit bolts for structural steel boltingDIN7969 - Slotted countersunk head fit bolts for structural steel bolting DIN6921 - Hexagon flange bolts GB/T818-2000GB/T819.1-2000Bolts Screws Studs NutsWasher s Set Screws Tapping ScrewsPins KeysRetain ing Insert sRivets等效等效等效等效参考等效等效参考等效等效等效等效ISO7047 - Crossed recessed raised csunk headscrewsISO4017 - Hexagon head screwsISO8676 - Hexagon head screws, with fine pitch threadNON1241 - Hexagon head screws, with serrated flangeISO4762 - Hexagon socket head cap screwsDIN7984 - Hexagon socket thin head cap screws DIN921 - Slotted pan head screws with large headISO7379 - Hexagon socket head shoulder screws ISO7380 - Hexagon socket button head screws DIN7991 - Hexagon socket flat head screws ISO1580 - Slotted pan head screws ISO2009 - Slotted csunk head screws NON1243 - Crossed recessed pan head screwsISO2010 - Slotted raised csunk head screws ISO1207 - Slotted cheese head screwsGB/T70.1-2000GB6191-86GB5281-85GB/T70.2-2000GB2673-86GB/T67-2000GB/T68-2000GB/T69-2000GB/T5783-2000GB/T5786-2000GB/T65-2000GB/T820-2000Bolts Screws Studs NutsWasher s Set Screws Tapping ScrewsPins KeysRetain ing Insert sRivets参考参考参考参考参考参考参考参考DIN32501GA - Threaded studs for stud welding,tip ignitionDIN32501SIA - Internal threaded studs for stud welding, tip ignitionNutsDIN32500P - Threaded studs for stud welding,non-flangedNON9801 - Self-clinching studsNON9802 - Self-clinching standoffs, blind NON9804 - Self-clinching studs for PC boards NON9803 - Self-clinching standoffs, thru-hole DIN939FO - Studs (without interferencethread)DIN939 - Studs (with interference thread)DIN975 - Threaded rodDIN316 - Wing screws DIN464 - Knurled thumb screws GB62-88(蝶形螺母）GB834-88GB902.2-89GB902.3-89GB902.3-89GB897-88GB15389-94GB897-88Bolts Screws Studs NutsWasher s Set Screws Tapping ScrewsPins KeysRetain ing Insert sRivets等效等效等效等效等效参考参考参考参考参考参考参考参考等效DIN917 - Hexagon cap nuts DIN7967 - Self-locking (PAL) nuts DIN562 - Flat square nuts DIN929 - Hexagon weld nutsISO4032 - Hexagon nuts ISO4035 - Hexagon thin nuts ISO4161 - Hexagon nuts with flange ISO8673 - Hexagon nuts with fine pitchthreadsISO8675 - Hexagon thin nuts with fine pitch threadsNON7201 - Hexagon nuts with serrated flange DIN555 - Hexagon nuts (Nylon)DIN935 - Hexagon castle nuts DIN582 - Lifting eye nuts DIN315 - Wing nuts ISO7040 - Prevailing torque hexagon nuts withnon-metallic insertsGB/T6173-2000GB/T41-2000GB/T6178-86GB923-88GB805-88GB825-88GB/T6177.1-2000GB/T6171-2000GB62-88GB39-88GB/T13681-92GB/T889.1-2000GB/T6170-2000GB/T6172.1-2000Bolts Screws Studs NutsWasher s Set Screws Tapping ScrewsPins KeysRetain ing Insert sRivets等效等效等效参考参考DIN435 - Square beveled washers for I-beams (14%)GB853-88GB852-88DIN434 - Square beveled washers for channels(8%)NON7203 - Hexagon lock nuts with lock washers DIN508 - T-nutsNON7202 - Hexagon lock nuts with attached conical spring washersNON7206 - Rivet nutsNON7207 - Self-clinching nuts for printed circuit boardsISO7042 - Prevailing torque all-metal hexagonnutsISO7719 - Prevailing torque all-metal hexagonnutsISO7043 - Prevailing torque hex nuts w/flange and non-metallic insertsNON7205 - Self-clinching nutsNON7204 - Hexagon lock nuts with conical spring washersNON7208 - Self-clinching nuts GB/T6184-2000GB/T6183.1-2000GB/T6185.1-2000Bolts Screws Studs NutsWasher s Set Screws Tapping ScrewsPins KeysRetain ing Insert sRivets参考参考参考参考参考参考等效等效GB7245-87DIN127 - Helical spring lock washers DIN137 - Spring washers, wavy DIN6796 - Conical spring washersGB93-87GB955-87DIN128A - Curved spring lock washers NON1302 - Internal/external serrated lock washersGB862.1-87GB861.1-87GB862.2-87ISO7089 - Plain washers - normal seriesISO7093 - Plain washers - large series DIN2093 - Disc springsDIN6797A - External tooth lock washerswashersDIN6797J - Internal tooth lock washers washersDIN6798A - External serrated lock washers NON1301 - Internal tooth lock washers (cupped)GB/T97.1-2002GB/T96.1-2002GB/T96.2-2002Bolts Screws Studs NutsWasher s Set Screws Tapping ScrewsPins KeysRetain ing Insert sRivets参考参考参考参考参考参考等效等效等效GB/T78-2000GB/T79-2000DIN463 - Tab washers with long and short tabs GB96-85GB855-88DIN7989A - Plain washers for steelconstructionISO7416 - High-strength structural washers ISO4026 - Hexagon socket set screws with flatpointISO4027 - Hexagon socket set screws with conepointDIN6319C - Spherical washers DIN6319G - Conical seatsGB/T77-2000DIN432 - Locking tab washers DIN5419 - Felt rings DIN7349 - Plain washers, thick ISO4028 - Hexagon socket set screws with dog pointDIN93 - Tab washers with long tabs GB849-88GB850-88GB854-88GB/T97.2-2002GB856-88Bolts Screws Studs NutsWasher s Set Screws Tapping ScrewsPins KeysRetain ing Insert sRivets等效等效等效等效等效等效等效等效等效等效参考参考ISO4029 - Hexagon socket set screws with cuppointISO7049 - Crossed recessed pan head tapping screwsISO7050 - Crossed recessed countersunk flat head tapping screwsISO7051 - Crossed recessed raised csunk head tapping screwsISO1479 - Hexagon head tapping screwsISO1481 - Slotted pan head tapping screws ISO1483 - Slotted raised countersunk head tapping screwsDIN7500C - Crossed recessed pan head thread rolling screwsDIN7500D - Hexagon head thread rolling screws GB5285-85GB5282-85GB5283-85ISO7434 - Slotted set screws with cone point GB73-85ISO1482 - Slotted countersunk head tapping screwsISO4766 - Slotted set screws with flat point GB5284-85GB6560-86GB6563-86GB/T80-2000GB71-85GB845-85GB846-85GB847-85Bolts Screws Studs NutsWasher s Set Screws Tapping ScrewsPins KeysRetain ing Insert sRivets参考参考参考参考参考参考参考参考GB882-86ISO2341 - Clevis pins, with headDIN7504K - Hexagon head self-drilling screws DIN7504P - Crossed recessed countersunk head self-drilling screwsDIN7997 - Crossed recessed countersunk head wood screwsDIN7500M - Crossed recessed countersunk headthread rolling screwsNON1242 - Crossed recessed oval head thread rolling screwsDIN7504N - Crossed recessed pan head self-drilling screwsISO2340 - Clevis pins, without headTYPE A w/o split pin holeGB/T5856.1-95GB6561-86GB880-86GB951-86GB/T15856.4-95GB/T15856.2-95TYPE B w/ split pin holeTYPE A w/o split pin holeDIN1434 - Clevis pins, with head(DIN1434 has been cancelled, superseded by ISO2341)GB882-86Bolts Screws Studs NutsWasher s Set Screws Tapping ScrewsPins KeysRetain ing Insert sRivets等效等效等效等效等效等效等效等效等效GB/T119.1-2000GB/T879.3-2000GB/T13829.2-92(TYPEA)GB/T13829.2-92(TYPEB)GB/T879-2000ISO2339 - Taper pins, unhardened GB/T117-2000ISO8744 - Grooved pins, full-length taper groovedNON8101 - Spring-type straight pins, with serrated slotTYPE ATYPE BISO2338 - Parallel pins, unhardenedISO8745 - Grooved pins, half-length taper groovedISO8752 - Spring-type straight pins, slotted GB/T879.4-2000GB/T13829.1-92(TYPEB)ISO8740 - Grooved pins, full-length parallel grooved with chamferISO8741 - Grooved pins, half-length reverse taper groovedGB/T13829.2-92(TYPEC)TYPE B w/ split pin holeISO8748 - Spring-type straight pins coiled,heavy dutyISO8750 - Spring-type straight pins coiled,standard dutyBolts Screws Studs NutsWasher s Set Screws Tapping ScrewsPins KeysRetain ing Insert sRivets等效参考等效参考参考DIN6885 - Rectangular or square parallel keys TYPE ATYPE BDIN6886 - Taper keys GB/T1096-1979GB/T1564-1979TYPE ATYPE BKeysTYPE ATYPE BGB/T881-2000GB119.2-2000GB/T91-2000ISO1234 - Split pins DIN6325 - Parallel pins, hardened (Dowel pins)ISO8737 - Taper pins with external thread,unhardenedBolts Screws Studs NutsWasher s Set Screws Tapping ScrewsPins KeysRetain ing Insert sRivets参考参考参考参考参考参考DIN660 - Round head rivetsGB867-86DIN16903 - Insert nuts for plastic moldingsNON25101 - Helical coil insertsDIN6799 - CirclipsDIN988 - Shim rings and Supporting ringsGB896-86GB/T1099-1979DIN471 - Retaining rings for shafts, normaldutyDIN472 - Retaining rings for bores, normal dutyGB894.2-86GB893.2-86DIN6887 - Taper keys with gib head DIN6888 - Woodruff keys GB/T1565-1979。

部分紧固件国家标准与国际标准对照表

开槽沉头螺钉开槽沉头螺钉
4 GB/T 69-2000
开槽半沉头螺钉开槽半:沉头螺钉（通用头型） A 级
开槽螺钉
5 GB/T 70.1-2000 内六角圆柱头螺钉 6 GB/T 70.2-2000 内六角平圆头螺钉 7 GB/T 70.3-2000 内六角沉头螺钉
8 GB/T 77-2000
内六角平端紧定螺钉
四、垫圈
ISO 标准代号
美国标准代号
德国标准代号
日本标准代号
ISO 7091:2000
ASME B18.21.1 1999
ASME B18.22.1 1965(R 1998)
DIN EN ISO 7091
JIS B 1256: 1998
序号中国国家标准代号
1 GB/T 15389-94 螺杆
2
双头螺柱
DIN EN ISO 4014 DIN EN ISO 4017 DIN EN ISO 4017 DIN EN ISO 8765 DIN EN ISO 8765 DIN EN ISO 8676 DIN EN ISO 8676 DIN EN 1665
JIS B 1171: 2005 JIS B 1178: 1994
序号中国国家标准代号
标准名称
31
大六角螺母和大六角薄螺母
32
六角开槽螺母
开槽六角螺母
33
盖形螺母
34
眼镜框架用机器螺钉和螺母
序号中国国家标准代号
标准名称
1 GB/T 65-2000
开槽圆柱头螺钉开槽圆柱头螺钉 A 级
2 GB/T 67-2000
开槽盘头螺钉开槽盘头螺钉（通用头型）A 级
3 GB/T 68-2000

紧固件标准对照表

GB806-88
47 DIN467
滚花薄螺母
Knurled thumb thin nuts
GB807-88
48 DIN470
锁紧垫圈
Sealing washers
49 DIN471
轴用弹性垫圈
Retaining rings for shafts(external),circlips
GB893-86
50 DIN472
方头带垫关圆底端 Square head bolts with collar,half dog
53 DIN480
螺栓
point
54 DIN508
T 型槽螺母
T-slot nuts
ISO299
55 DIN525
单头螺柱
Single end studs
56 DIN529
地脚螺栓
Masonry bolts
Thread
89 DIN909
外六角锥型闭锁螺钉
Thread
90 DIN910
外六角直型闭锁 Hexagon head screw plugs,cyl.thread
螺钉
91 DIN911
内六角扳手
Socket wrenches
ISO2936
92 DIN912 内六角圆柱头螺钉
Hexagon socket cap screws
40 DIN443
密封帽
Sealing caps,push-in type
41 DIN444
活节螺栓 B 型
Eye bolts form B
GB798-88
42 DIN462
内舌止动垫圈
Internal tab washers

紧固件对应表

GB ISO DIN名称GB/T14-1998ISO8677-1986大半圆头方颈螺栓GB/T801-1998ISO8678-1988小半圆头低方颈螺栓GB/T5780-2000ISO4016-1999六角头螺栓GB/T5781-2000ISO4018-1999六角头螺栓　全螺纹GB/T5782-2000ISO4014-1999六角头螺栓GB/T5783-2000ISO4017-1999六角头螺栓GB5784-86ISO4015-1979六角头螺栓GB/T5785-2000ISO8765-1999六角头螺栓GB/T5786-2000ISO8676-1999六角头螺栓GB/T16674-1996ISO4162-1990六角法兰面螺栓GB/T41-2000ISO4034-1999六角螺母GB/T889.1-2000ISO7040-1997锁紧螺母GB/T889.2-2000ISO10512-1997锁紧螺母GB/T6170-2000ISO4032-1999六角螺母GB/T6171-2000ISO8673-1999六角螺母GB/T6172.1-2000ISO4035-1999六角螺母GB/T6172.2-2000ISO10511-1997六角锁紧螺母GB/T6173-2000ISO8675-1999六角薄螺母GB/T6174-2000ISO4036-1999六角薄螺母GB/T6175-2000ISO4033-1999六角螺母GB/T6176-2000ISO8674-1999六角螺母GB/T6177.1-2000ISO4161-1999六角法兰面螺母GB/T6177.2-2000ISO10663-1999六角法兰面螺母GB/T6182-2000ISO7041-1997六角锁紧螺母GB/T6183.1-2000ISO7043-1997六角法兰面锁紧螺母GB/T6183.2-2000ISO12125-1997六角法兰面锁紧螺母GB/T6184-2000ISO7719-1997六角锁紧螺母GB/T6185.1-2000ISO7042-1997六角锁紧螺母GB/T6185.2-2000ISO10513-1997六角锁紧螺母GB/T6186-2000ISO7720-1997六角锁紧螺母GB/T6187.1-2000ISO7044-1997六角法兰面锁紧螺母GB/T6187.2-2000ISO12126-1997六角法兰面锁紧螺母GB/T18195-2000ISO4166-1979六角螺母GB/T65-2000ISO1207-1992开槽圆柱头螺钉GB/T67-2000ISO1580-1994开槽盘头螺钉GB/T68-2000ISO2009-1994开槽沉头螺钉GB/T69-2000ISO2010-1994开槽半沉头螺钉GB/T70.1-2000ISO4762-1997内六角圆柱头螺钉GB/T70.2-2000ISO7380-1997内六角平圆头螺钉GB/T70.3-2000ISO10642-1997内六角沉头螺钉GB73-85ISO4766-1983开槽平端紧定螺钉GB74-85ISO7436-1983开槽凹端紧定螺钉GB75-85ISO7435-1983开槽长圆柱端紧定螺钉GB/T77-2000ISO4026-1993内六角平端紧定螺钉GB/T78-2000ISO4027-1993内六角锥端紧定螺钉GB/T79-2000ISO4028-1993内六角圆柱端紧定螺钉GB/T80-2000ISO4029-1993内六角凹端紧定螺钉GB/T818-2000ISO7045-1994十字槽盘头螺钉GB/T819.1-2000ISO7046-1-1994十字槽沉头螺钉 4.8级GB/T819.2-2000ISO7046-2-1994十字槽沉头螺钉8.8级GB/T820-2000ISO7047-1994十字槽半沉头螺钉GB/T822-2000ISO7048-1998十字槽圆柱头螺钉GB5281-85ISO7379-1983内六角圆柱头轴肩螺钉GB95-85ISO7091-1983平垫圈　C级GB96-85ISO7093-1983大垫圈　A和C级GB97.1-85ISO7089-1983平垫圈　A级GB97.2-85ISO7090-1983平垫圈　倒圆型　A级GB/T97.3-2000ISO8738-1986销轴用平垫圈GB848-85ISO7092-1983小垫圈　A级GB5287-85ISO7094-1983特大垫圈　C级GB/T91-2000ISO1234-1997开口销GB/T117-2000ISO2339-1986圆柱销GB/T118-2000ISO8736-1986内螺纹圆柱销GB/T119.1-2000ISO2338-1986圆柱销GB/T119.2-2000ISO8734-1986圆柱销GB/T120.1-2000ISO8733-1997内螺纹圆柱销GB/T120.2-2000ISO8735-1997内螺纹圆柱销GB/T879.1-2000ISO8752-1997弹性圆柱销GB/T879.2-2000ISO13337-1997弹性圆柱销GB/T879.3-2000ISO8748-1997弹性圆柱销GB/T879.4-2000ISO8750-1997弹性圆柱销GB/T879.5-2000ISO8751-1997弹性圆柱销GB/T881-2000ISO8737-1986螺尾锥销GB/T18230.1-2000ISO7411-1984大六角头螺栓GB/T18230.2-2000ISO7412-1984大六角头螺栓。

常用金属材料及焊条国内外牌号对照详表

一. 常用国内外‎紧固件材料‎的标准及牌‎号对照表<->
表<二>
二. 常用国内外‎压力容器用‎钢材材料牌‎号对照表1
三. 国内外常用‎不锈耐热钢‎棒牌号对照‎
续表耐热钢棒牌‎号对照
四. 常用国内外‎配管用钢管‎材料牌号、标准对照
五. 常用国内外‎钢管金属材‎料牌号对照‎钢管金属材‎料牌号对照‎
六. 常用国内外‎合金结构钢‎材料牌号对‎照
续表合金结构钢‎牌号对照(二)
七. 常用国内外‎碳素结构钢‎牌号对照
八. 常用国内外‎锻件金属材‎料牌号对照‎碳素钢锻件‎
钢锻件
九. 常用国内外‎铸钢牌号对‎照
(a) 普通铸钢棒‎牌号对照(一)
低合金
十一. 碳钢焊条牌‎号近似对照‎表
十二. 世界各国铬‎钼耐热钢焊‎条牌号近似‎对照表。

紧固件德标、欧标、国际、国标对照表

德标、欧标、国际、国标对照表—— DIN EN ISO GB 对照表新德标旧德标英文名中文名国标 DIN EN ISO 4014DIN 931-1 Hexagon head bolts - Product grades A and B(ISO 4014:1999) 六角头螺栓 GB/T 5782-2000 DIN EN ISO 4016DIN 601 Hexagon head bolts - Product grade C(ISO 4016:1999) 六角头螺栓 C 级 GB/T 5780-2000 DIN EN ISO 4017DIN 933 Hexagon head screws - Product grade A and B (ISO 4017:1999) 六角头螺栓全螺纹 GB/T 5783-2000 DIN EN ISO 4018DIN 558 Hexagon head screws - Product grade C (ISO 4018:1999) 六角头螺栓全螺纹 C 级 GB/T 5781-2000 DIN EN ISO 8676DIN 961 Hexagon head screws with metric fine pitch thread - Product grade A and B(ISO 8676:1999) 六角头螺栓细牙全螺纹 GB/T 5786-2000 DIN EN ISO 8765DIN 960 Hexagon head bolts with fine pitch thread - Product grades A and B(ISO 8765:1999) 六角头螺栓细牙 GB/T 5785-2000 DIN EN ISO 4032DIN 934 Hexagon nuts,style 1-Product grades A and B(ISO: 4032:1999) 1型六角螺母 GB/T 6170-2000 DIN EN ISO 4033Hexagon nuts,style 2-Product grades A and B(ISO: 4033:1999) 2型六角螺母 GB/T 6175-2000 DIN EN ISO 4034DIN 555 Hexagon nuts - Product grade C (ISO 4034:1999) 六角螺母 C 级 GB/T 41-2000 DIN EN ISO 4035DIN 439-2 Hexagon thin nuts(chamfered)-Product grade A and B (ISO 4035:1999) 六角薄螺母 GB/T 6172.1-2000 DIN EN ISO 4036DIN 439-1 Hexagon thin nuts - Product grade B(unchamfered)(ISO 4036:1999) 六角薄螺母无倒角 GB/T 6174-2000 DIN EN ISO 8673DIN 934| DIN 971-1 Hexagon nuts,style 1,with metric fine pitch thread - Product grades A and B (ISO 8673:1999) 1型六角螺母细牙 GB/T 6171-2000 DIN EN ISO 8674DIN 971-2 Hexagon nuts,style 2,with metric fine pitch thread - Product grades A and B (ISO 8674:1999) 2型六角螺母细牙 GB/T 6176-2000 DIN EN ISO 8675DIN 439-2 Hexagon thin nuts with metric fine pitch thread - Product grades A and B (ISO 8675:1999) 六角薄螺母细牙 GB/T 6173-2000 DIN EN ISO 4762 DIN 912 Hexagon socket head cap screws(ISO 4762:1997) 内六角圆柱头螺钉GB/T 70.1-2000DIN EN ISO 7380Hexagon socket button head sxrews (ISO 7380:1997) 内六角平圆头螺钉 GB/T 70.2-2000 DIN EN ISO 10642DIN 7991 Hexagon socket countersunk head screws (ISO 10642:1997) 内六角沉头螺钉 GB/T 70.3-2000 DIN EN ISO 1207DIN 84 Slotted cheese head screws-Product grade A(ISO 1207:1992) 开槽圆柱头螺钉 GB/T 65-2000 DIN EN ISO 1580DIN 85 Slotted pan head screws-Product grade A(ISO 1580:1994) 开槽盘头螺钉 GB/T 67-2000 DIN EN ISO 2009DIN 963 Slotted countersunk flat head screws(common head style)(ISO 2009:1994) 开槽沉头螺钉 GB/T 68-2000 DIN EN ISO 2010DIN 964 Countersunk slotted raised head screws(common head style)-Produce grade A(ISO 2010:1994) 开槽半沉头螺钉 GB/T 69-2000 DIN EN ISO 7045DIN 7985 Pan head screws with type H or type Z cross recess-Product grade A(ISO 7054:1994) 十字槽盘头螺钉 GB/T 818-2000 DIN EN ISO 7046-1DIN 965 Countersunk flat head screws (common head style)with type H or type Z cross recess,product grade A-Part 1:Steel of property class 4.8(ISO 7046-1:1994) 十字槽盘头螺钉第1部分：钢4.8级 GB/T 819.1-2000 DIN EN ISO 7046-2DIN 965 Cross recessed countersunk flat head screws (common head style),product grade A-Part2:Steel of property class 8.8,stainless steel and nonferous metals(ISO 7046-2:1990) 十字槽沉头螺钉第2部分：钢8.8、不锈钢A2-70和有色金属CU2或CU3 GB/T 819.2-1997 DIN EN ISO 7047DIN 966 Countersunk raised head screws (common head style) with type H or type Z cross recess-Product grade A(ISO 7047:1994) 十字槽半沉头螺钉 GB/T 820-2000 DIN EN ISO 7048Cross recessed cheese head screws (ISO 7048:1998) 十字槽圆柱头螺钉 GB/T 822-2000 DIN EN ISO 10644Screw and washer assemblies with plain washers-Washer hardness classes 200HV and 300HV(ISO 10644:1998) 螺栓或螺钉和平垫圈组合件 GB/T 9074.1-2002 DIN EN ISO 10510Tapping screw and washer assemblies with plain washers(ISO 10510l:1999) 自攻螺钉和平垫圈组合件 GB/T 9074.18-2002 IDN EN ISO 15480Hexagon washer head drilling screws with tapping screws thread (ISO 15480:1999) 六角凸缘自钻自攻螺钉 GB/T 15856.5-2002 IDN EN ISO 15481Cross recessed pan head drilling screws with tapping screw thread(ISO 15481:1999) 十字槽盘头自钻自攻螺钉 GB/T 15856.1-2002 IDN EN ISO 15482 Cross recessed countersunk head drilling screws with tapping screw thread (ISO 15482:1999) 十字槽沉头自钻自攻螺钉GB/T 15856.2-2002IDN EN ISO 15483Cross recessed raised countersunk head drilling screws with tapping screw thread(ISO 15483:1999) 十字槽半沉头自钻自攻螺钉 GB/T 15856.3-2002 DIN EN ISO 10669Plain washers for tapping screw and washer assemblies - Normal and large series - Product grade A （ISO 10669:1999) 平垫圈用于自攻螺钉和垫圈组合件 GB/T 97.5-2002 DIN EN ISO 10673Plain washers for screw and washer assemblies - Small,normal and large series - Product grade A (ISO 10673:1998) 平垫圈用于螺钉和垫圈组合件 GB/T 97.4-2002 DIN EN ISO 2338DIN 7 Parallel pins,of unhardened steel and austenitic stainless steel(ISO 2338:1997) 圆柱销不淬硬钢和奥氏体不锈钢 GB/T 119.1-2000 DIN EN ISO 8733DIN 7979 Parallel pins whit internal thread,of unhardened steel and austenitic stainless steel(ISO 8733:1997) 内螺纹圆柱销不淬硬钢和奥氏体不锈钢 GB/T 120.1-2000 DIN EN ISO 8734DIN 6325 Parallel pins,of hardened steel or martensitic stainless steel(Dowel pins)(ISO 8734:1997) 圆柱销淬硬钢和马氏体不锈钢 GB/T 119.2-2000 DIN EN ISO 8735DIN 7979 Parallel pins with internal thread,of hardened steel and martensitic stainless steel(ISO 8735:1997) 内螺纹圆柱销淬硬钢和马氏体不锈钢 GB/T 120.2-2000 DIN EN ISO 8748DIN 7344 Spring-type straight pins,coiled,heavy duty (ISO 8748:1997) 弹性圆柱销卷制重型 GB/T 879.3-2000 DIN EN ISO 8750DIN 7343 Spring-type straight pins,coiled,standard duty (ISO 8750:1997) 弹性圆柱销卷制标准型 GB/T 879.4-2000 DIN EN ISO 8751Spring-type straight pins,coiled,light duty （ISO 8751:1997) 弹性圆柱销卷制轻型 GB/T 879.5-2000 DIN EN ISO 8752DIN 1481 Spring-type straight pins,slotted,heavy duty (ISO 8752:1997) 弹性圆柱销直槽重型 GB/T 879.1-2000 DIN EN ISO 13337DIN 7346 Spring-type straight pins,slotted,light duty (ISO 13337:1997) 弹性圆柱销直槽轻型 GB/T 879.2-2000 DIN EN ISO 1234DIN 94 Split pins （ISO1234:1997) 开口销 GB/T 91-2000 DIN EN ISO 7089Plain washers-Normal series-Product grade A 平垫圈 A 级 GB/T 97.1-2002 DIN EN ISO 7090Plain washers,chamfered-Normal series-Product grade A(ISO 7090:2000) 平垫圈倒角型 A 级 GB/T 97.2-2002 DIN EN ISO 7091Plain washers-Normal series-Product grade C(ISO 7091:2000) 平垫圈 C 级 GB/T 95-2002 DIN EN ISO 7092 Plain washers-Small series-Product grade A(ISO 7092:2000)小垫圈 A 级 GB/T 848-2002DIN EN ISO 7093-1 Plain washers-Large series-Part 1: Product grade A(ISO 70931-1:2000)大垫圈 A 级 GB/T 96.1-2002DIN EN ISO 7093-2Plain washers-Normal series-Part 3: Product grade C(ISO 70936-2:2000) 大垫圈 C 级 GB/T 96.2-2002 DIN EN ISO 7094Plain washers-Extra large series -Product grade C(ISO 7094:2000) 特大垫圈 C 级 GB/T 5287-2002 DIN EN ISO 7040DIN 982| DIN 6924 Prevailing torque type hexagon nuts (with non-metallic insert),style 1 - Property classes 5,8 and 10(ISO 7040:1997) 1型非金属嵌件六角锁紧螺母 GB/T 889.1-2000 DIN EN ISO 7042DIN 980| DIN 6925 Prevailing torque type all-metal hexagon nuts,style 2 - Property classes 5,8, 10 and 12(ISO 7042:1997) 2型全金属六角锁紧螺母 GB/T 6185.1-2000 DIN EN ISO 7719Prevailing torque type all-metal hexagon nuts,style 1- Property classes 5,8 and 10(ISO 7719:1997) 1型全金属六角锁紧螺母 GB/T 6184-2000 DIN EN ISO 10511DIN 985 Prevailing torque type hexagon thin nuts (with non-metallic insert )(ISO 10511:1997) 非金属嵌件六角锁紧薄螺母 GB/T 6072.2-2000 DIN EN ISO 10512DIN 982| DIN 6924 Prevailing torque type hexagon nuts (with non-metallic insert),style 1,with metric fine pitch thread-Property classes 6,8 and 10(ISO 10512:1997) 1型非金属嵌件六角锁紧螺母细牙 GB/T 889.2-2000 DIN EN ISO 10513 DIN 980|DIN 6925 Prevailing torque type all-metal hexagon nuts,style 2,with metric fine pitch thread - Property classes 8,10 and 12(ISO 10513:1997)2型全金属六角锁紧螺母细牙GB/T 6185.2-2000。

常用国内外材料地实用标准及牌号对照

一.常用国内外紧固件材料的标准及牌号对照表<->
表<二>
二.常用国内外压力容器用钢材材料牌号对照表1
三.国内外常用不锈耐热钢棒牌号对照
四.常用国内外配管用钢管材料牌号、标准对照
五.常用国内外钢管金属材料牌号对照钢管金属材料牌号对照
六.常用国内外合金结构钢材料牌号对照
续表合金结构钢牌号对照(二)
七.常用国内外碳素结构钢牌号对照
八.常用国内外锻件金属材料牌号对照
九.常用国内外铸钢牌号对照
(a)普通铸钢棒牌号对照(一)
十一.碳钢焊条牌号近似对照表
十二.世界各国铬钼耐热钢焊条牌号近似对照表
各国低温钢焊条牌号近似对照表。