400W270Vin5Vout全砖军用模块电源
Cyber Power Systems (USA), Inc. 电源保护设备说明书
CAUTIONTO REDUCE THE RISK OF ELECTRIC SHOCK:Use only in dry locations and only indoors.DO NOT plug into another relocatable power tap.DO NOT “daisy chain” surge protectors.DO NOT use with any aquarium equipment.DO NOT use if properly grounded outlets are not available.DO NOT install this device if there is less than 10 meters (30 feet) of wire between the electrical outlet and electrical service panel.DO NOT use for medical or life support equipment. This device features an internal protection that will disconnect the surge protective component at the end of its useful life, but it will maintain unprotected power to the load.FOR MORE INFORMATIONVisit for more information regarding: • Product information and certifications• Product warranty• Connected equipment guarantee TECHNICAL SUPPORTVisit: /supportT oll-Free: 1-877-297-6937Hours of Operation: Monday - Friday: 7:00am - 6:00pm CST © 2023 Cyber Power Systems (USA), Inc. All rights reserved.All other trademarks are the property of their respective owners.FEATURES1. Protected LED IndicatorIlluminated when the surge protection feature is working properly.2. Grounded LED IndicatorIlluminated when the ground protection feature is working properly.3. ON/OFF Reset Control Switch and Circuit BreakerControls power to all outlets. The switch is also a 15 A breaker.When an overload occurs, it will automatically switch off. T o resume operation, ensure the overload condition is removed and reset the surge protector by switching the unit ON.4. Safety CoversAll outlets on this surge protector include safety covers. Slide the plastic outlet cover over outlets that are not used. This ensuresthe safety of children and prevents potential electric shocks and damage caused by highly dusty environments.5. Always-On Grounded Outlets (2)Provides continuous power regardless of whether the Master and Master controlled outlets are on or off.6. Energy-Saving Master Controlled Grounded Outlets (4)Automatically switched on or off by master outlet.7. Energy-Saving Master Grounded OutletAutomatically switches four master controlled outlets on or off.8. Transformer-spaced Grounded Outlet (1)Easily plug in large chargers without interfering with the other outlets.9. Threshold SwitchAdjusts the threshold at which the energy saving outlets adjust the switch according to the device plugged into the Master outlet.High mode: For high wattage devices such as a TV or PC.Low mode: For low wattage devices such as a laptop.TROUBLESHOOTINGIf the ON/OFF is switched OFF, the 15Amp circuit breaker may have tripped.Examine your connected equipment andremove the device that is overloading thecircuit. Then, turn the ON/OFF switch backto RESET.If the grounded indicator does not lightwhen you plug in the surge protector,move the surge protector to a differentgrounded three-prong AC outlet. If itstill does not light, return the productto the retailer for assistance. If thesurge protector appears to be workingproperly, your outlets may not be properlygrounded and need to be repaired by aprofessional electrician.If the grounded indicator turns off aftera period of use, the surge protection hasbeen depleted. Replace yoursurge protector.If the protected indicator does not light,the surge protector’s AC lines are nolonger protected from surge. The surgeprotector may have received a powersurge or spike beyond its specified limitsthat overloaded the protection circuitryand rendered it inactive. The surgeprotector has protected your connectedequipment as designed, but it will notprotect against future surges, and spikes. Itshould be replaced.If the Master-controlled outlets don’t turnon or off when your laptop computer orTV is connected to the Master outlet:1. The power drawn from the MasterOutlet must be below the thresholdsetting (High/Low) for the MasterControlled Outlets to turn off. Somecomputers will continue to consumepower during battery charging or instandby mode. In this case, pleasemake sure hibernate or sleep mode isenabled on your computer.2. The power drawn from the MasterOutlet must be above the thresholdsetting (High/Low) for the MasterControlled Outlets to turn on. Somecomputers and TVs will not drawenough power to turn on the MasterControlled outlets. In this case, pleasetry plugging a different primary deviceinto the Master Outlet or make sure thethreshold switch is set to Low.7-OUTLET ENERGY SAVINGSURGE PROTECTORP705GUSER MANUALYOUR ULTIMATE ALL Y IN POWERCyber Power Systems (USA), Inc.4241 12th Avenue East, Suite 400 | Shakopee, MN 55379SPECIFICATIONSModel Number: P705GGrounded Outlets: Standard Outlets (6),Transformer-spaced Outlet (1)Surge Protection: 2,100 JoulesElectrical Rating: 125 V / 15 A / 1875 WUL Clamping Voltage: UL 1449 3rd / 400 V (L-N, L-G, N-G)Maximum Peak Current: 105,000A3 AC Lines Protected: L-N: 45,000 A; L-G: 30,000 A;N-G: 30,000 A(The maximum surge possible onhousehold wiring is 6,000 volts)Response Time: Less than 1 nanosecondAttenuation: Up to 32 dBCircuit Breaker: Resettable 15 AmpEMI/RFI Filtration: 150 kHz to 100 MHzi W ARNING: This product can expose you to chemicals including bisphenol A (BPA)and styrene (ABS), which is known to the State of California to cause reproductiveharm and cancer. For more information, go to .CONFORMANCE APPROVALSThis device complies with Part 15 of the FCC Rules.Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipmentgenerates, uses, and can radiate radio frequency energy and, if notinstalled and used in accordance with the instructions, may causeharmful interference to radio communications.However, there is no guarantee that interference will not occur in aparticular installation. If this equipment does cause harmful interfer-ence to radio or television reception, which can be determined byturning the equipment off and on, the user is encouraged to try tocorrect the interference by one or more of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit different fromthat to which the receiver is connected.• Consult the dealer or an experienced radio/TV technician for help.WARNING: Changes or modifications not expressly approved by theparty responsible for compliance could void the user’s authority tooperate the equipment.。
军用电源模块的参数说明及产品特点介绍
跟大家来分享的是军用电源模块、军用雷达电源的相关资料。
首先我们来看河南兵峰电子科技公司所做的军用电源模块、军用雷达电源的产品参数：
环境要求：贮存温度：-30~+90℃（特殊需要可做到-40℃）
工作温度：JI 级：-35~+60℃JII 级：-35~+90℃
产品特点:双路输出，高效率，高可靠性，低温升，低纹波噪声，体积小，功率密度大；
自然冷却，全灌封，防潮、免维护；
具有工作状态及故障指示功能；具有输入过压、输入欠压、输出过压、输出过流、输出短路及过热保护功能
应用：雷达中信号接收与处理电路的供电
技术参数：输入：220Vac±20%，50±3Hz；（可根据顾客的具体需求进行设计）输出：5V10A,15V7.5A；（可根据顾客的具体需求进行设计）
工作效率：90%~98%；
绝缘电阻：普通室内环境下≥100MΩ，湿热环境下≥2MΩ；
可闻噪声：无；
冷却方式：自然冷却；
以上技术参数仅供参考，可根据本客户的具体需求进行调整。
看所定制军用电源模块、军用雷达电源的产品特点：
高效率，高可靠性；
高压，大功率，能满足客户特大功率的需求；
低功耗，降低损耗，节能环保，防潮，防霉菌，免维护；
体积小，低温升，低纹波噪声，响应速度快；
具有输入过压、输入欠压、输出过流、输出短路及过热保护功能。
AIMS Power PWRINV400W直流至交流电源逆变器使用说明书
DC TO AC POWER INVERTERPWRINV400W INSTRUCTION MANUALSAVE THIS MANUALYou will need the manual for the safety warnings and precautions, assembly instructions, operating and maintenance procedures, parts list and diagram. Keep your invoice with this manual. Write the invoice number on the inside of the front cover. Keep the manual and invoice in a safe and dry place for future reference.Basic Operation•Make sure that you choose the right operating voltage for both input and output of the inverter.•When unpacking, make sure that the inverter is in good condition. If any parts are missing or broken, please call AIMS Power, Inc. at the number found on the warranty card.•Place the power inverter on a flat surface. Make sure it has adequate ventilation and is not in direct sunlight. Fasten the inverter securely to the surface, using screws or some othermeans. If holes are to be drilled, follow safe, proper installation techniques.•Before you connect the battery cables, make sure the power switch is in the off position.Connect Red (+) battery cable to Red (+) inverter terminal. Connect Black (-) battery cable to Black (-) inverter terminal. Connect Red (+) battery cable to Red (+) battery terminal. Connect Black (-) battery cable to Black (-) battery terminal. Alligator clamp cables may be used but only to connect to the battery. Do not use clamps on inverter terminals. Alligator clamps are not a permanent solution. You may see a spark during connection.•Connect the ground cable to an earth ground, such as a metal water pipe or to the vehicle ground when used in a vehicle if the inverter includes a ground port.•Turn the power switch to the on position, which is located on the front of the inverter. The green LED light will confirm that AC power is present.•Before plugging the equipment into the inverter, make sure the equipment AND the inverter are off. Turn inverter on first, then turn on the equipment.•The power inverter can be used either while the engine is running or off.Warnings•Unplug the inverter when it is not in use.•If the AC inverter makes a beeping sound, turn off the equipment, unpl ug the inverter and restart the vehicle’s engine. The beeping sound is simply the low-battery warning, which indicates that the voltage of your battery is getting low. If you do not re-start your engine and continue operating the inverter, the inverter will automatically shut off, leavingyour vehicle's battery at about 10. 5 VDC. This will allow you to start your engine and resumeoperation of the inverter. It also reduces the fear of being stranded with a dead battery(dependent on health of battery).•This device should only be serviced by a qualified technician. This item does not have any serviceable parts.•Prevent body contact with grounded surfaces such as pipes, radiators, ranges, and refrigerator enclosures during installation.•Do not operate the inverter if under the influence of alcohol or drugs. Read warning labels on prescriptions to determine if your judgement or reflexes are impaired while taking drugs. Ifthere is any doubt, do not operate the inverter.•People with pacemakers should consult their physician(s) before using this product.Electromagnetic fields in close proximity to a heart pacemaker could cause interference to or failure of the pacemaker.•Keep children away. Children must never be allowed in the work area. Do not let them handle machines, tools, or extension cords.•Store idle equipment. When not in use, inverter must be stored in a dry location to prevent rust. Always lock up tools and the inverter and keep out of reach of children.•Size the inverter properly. Size the inverter for the surge rating of your equipment. The inverter’s continuous rating should be MORE than the surge rating of your equipment.Example: Power tool runs at 1500 watts but surges at 2500 watts. You should use an inverter >3000 watts.•Keep the inverter well-ventilated. Do not place any objects on top of or next to the inverter or allow anything to cover the cooling fans; doing so can cause the inverter to overheat,causing a potential fire hazard and/or damage to the inverter. Leave adequate ventilationspace underneath the inverter as well; thick carpets or rugs can obstruct air flow, causing the inverter to overheat.•Avoid unintentional starting. Be sure the switch is in the OFF position when not in use and before plugging in any appliance.Note: Performance of this unit may vary depending on the available battery power or appliance wattage.Warning: The warnings, cautions, and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by operator. Guard against electric shock. Do not open the metal case; risk of electric shock.Battery Use•To avoid over-discharging your vehicle battery, we recommend running your engine for 10-20 minutes to recharge the vehicle's battery if battery voltage drops <11V.•To properly size your battery, use the following formula: Volts * Amps = Watts or Watts/Volts = Amps. Example: 1000 watt inverter / 12 volts DC = 83.3 DC amps. In this example, you willneed 83.3 amps to power a 1000 watt load for 1 hour. If you need to power 1000 watts for 2hours you will need 83.3 * 2 = 166.66 DC amps available. A 100 amp hour battery will giveyou 100 amps / 166.66 = .6 hours so you will need two batteries if using 100 amp battery.This is if you fully deplete your batteries. We do NOT recommend fully depleting yourbatteries. This is just an example. Your power requirements may be different.•If you choose to use a female 12 Volt DC adapter for your inverter or to the inverter make sure wire size is correct.•IF YOU CONNECT THE WIRES TO THE INCORRECT TERMINALS, YOU WILL REVERSE THE POLARITY AND DAMAGE THE INVERTER.•REVERSED POLAR ITY WILL INSTANTLY VOID THE WARRANTY OF YOUR INVERTER, SO BE CAREFUL TO CONNECT YOUR INPUT WIRES PROPEPLY.•If you choose to operate a battery charger to replenish your battery’s voltage, be sure to check with charger manufacture before damaging the charger.•CONNECTING THE INVERTER’S DC INPUT TO A BATTERY CHARGER WILL VOID THE WARRANTY, AND MAY DAMAGE THE INVERTER.•Make sure that the battery voltage does not exceed 15 volts DC.•CONNECTING THE INVERTER TO A DC POWER SOURCE GREATER THAN 15 VDC WILL VOID THE WARRANTY, AND MAY DAMAGE THE INVERTER.CablesWe recommend that you refrain from using battery cables longer than 12 feet between the DC power source and the DC input of the inverter. Longer battery cables on the DC input will create a voltage drop which results in a reduction of efficiency and output. If you require more than 12 feet, use a bigger cable. We recommend using an extension cord between the AC output and AC appliance. You may use up to 100ft, high quality extension cord. A longer cord may result in reduced output. See Specifications chart for recommended battery cable size.Remote On/Off SwitchSome models include a remote port. An AIMS remote on/off switch may be connected to the remote port. The optional remote on/off switch is a convenientoption to turn the inverter on/off if the inverter is installed in a hard to reach area. Make sure the inverter is turned off before installing the remote switch. Plug the switch into the remote jack and then turn the main switch to the OFF position for the remote to work properly.Measuring The AC VoltageThe output waveform of the inverter is a MODIFIED SINE WAVE. If you choose to measure the AC output voltage, you must use a TRUE RMS MULTI METER. Using any other type of voltage measuring device will result in an AC voltage reading of 10 to 30 volts lower than actual voltage. When using a true RMS multi meter, you will get an accurate reading.SAFETY PRECAUTIONS•Do not open the case of the inverter. The high voltage inside the unit is the same type of power as your electrical outlets at home.•Do not let the cord of the inverter, or any appliance cord get wet. If you are operating the inverter in a moving vehicle, we recommend that you secure the inverter to prevent it fromshifting around while the vehicle is moving.•Do not operate this inverter in or around water. Water can damage the inverter, and water damage is not covered under warranty. Also, do not operate the inverter with wet hands. The AC voltage of the unit makes it an electrical shock hazard if operated with wet hands.•Allow at least 12 inches of clearance around the Inverter for air flow. Ensure the ventilation openings on the rear and bottom of the unit are not obstructed.•Do not connect the inverter directly to another AC power source. Damage may result, and such damage will void the inverter warranty.•Know the wattage requirements of your appliance. Use only those appliances which are limited by the capacity of this unit.•Use common sense. This device produces power just like your wall outlets at home and should be treated seriously. Keep it away from children.•Reversed polarity of AC power outlet LINE /NEUTRAL will void the warranty.•If there is anything wrong with the inverter, disconnect all of the power and contact technical support.If the Inverter does not appear to be functioning properly, check the following possible causes:•Poor contact: Clean contact parts thoroughly.•If the low battery alarm sounds, this means the input voltage is too low and battery needs to be recharged.•If you are getting a low output voltage, try reducing the load to minimize watts. You may have overloaded the inverter. Reduce your load. Also, keep input voltage above 10.5 volts tomaintain a constant flow of power.•If you are not getting any power output, turn the power switch Off and On again, until the green power light comes on. Your devices may draw too much power to operate them. Theinverter may be in thermal shutdown. Let it cool down and make sure there is adequateventilation around the unit.•If the green light turns red one of the following has happened:A.input voltage is too lowB.input voltage is too highC.short circuitD.inverter is close to overload•Battery voltage is too low: Start the engine to recharge the battery. Replace or recharge battery if needed.•Shuts down on overload: Reduce the wattage of your load.•Thermal shutdown: Under heavy loads for extended period, the inverter will shut down to prevent damage from excess heat. Simply reduce your load and allow theInverter to cool down.•Low-battery shutdown: Recharge your battery and resume operation.Very little maintenance is required to keep your inverter operating properly. You should disconnect input power first and then clean the exterior of the unit periodically with a dry cloth to prevent accumulation of dust and dirt. At the same time, tighten the screws on the DC input terminals.PLEASE READ THE FOLLOWING CAREFULLYNeither the manufacturer nor distributor makes any representation or warranty of any kind to the buyer that he or she is qualified to make any repairs to the product or that he or she is qualified to replace any parts of the product. In fact, the manufacturer and/or distributor expressly states that allrepairs and parts replacements should be undertaken by certified and licensed technicians and not by the buyer. The buyer assumes all risk and liability arising out of his or her repairs to the original product or replacement parts thereto, or arising out of his or her installation of replacement parts thereto.WARRANTYAIMS Corp., Inc. dba AIMS Power Warranty Instructions:This product is designed using the most modern digital technology and under very strict quality control and testing guidelines. If, however, you feel this product is not performing as it should, please contact us:**************************(775)359-6703We will do our best to resolve your concerns. If the product needs repair or replacement, make sure to keep your receipt/invoice, as that will need to be sent back along with the package and RMA# prepaid to AIMS. You have a full 1 year warranty from date of purchase.This warranty is valid worldwide with the exception that freight and duty charges incurred outside the contiguous 48 United States will be prepaid by customer.Except as provided above, AIMS makes no warranty of any kind, express or implied, including without limitation the implied warranties of merchantability and fitness for a particular purpose. In no event shall AIMS be liable for indirect, special or consequential damages. This warranty only applies to AIMS Power branded products. All other name brand products are warranted by and according to their respective manufacturer. Please do not attempt to return non-AIMS Power branded products to AIMS Power.For additional products such as:-Modified sine wave inverters-Pure sine wave inverters-Low Frequency Inverters-Solar Charge Controllers-Micro Grid Tied Inverters-Inverter Chargers and Automatic transfer switches-Converters DC-DC-Custom cut cables-Batteries-Solar Panels & RacksPlease visit our web site: Tofindoutwheretobuyanyofourproducts,youmayalsoe-mail:************************ (775)359-6703.。
常用替换运放型号对比
常⽤替换运放型号对⽐常⽤替换运放型号对⽐CA3130 ⾼输⼊阻抗运算放⼤器 Intersil[DATA] CA3140 ⾼输⼊阻抗运算放⼤器 CD4573 四可编程运算放⼤器 MC14573ICL7650 斩波稳零放⼤器 LF347(NS[DATA]) 带宽四运算放⼤器 KA347 LF351 BI-FET单运算放⼤器 NS[DATA] LF353 BI-FET双运算放⼤器 NS[DATA] LF356 BI-FET单运算放⼤器 NS[DATA] LF357 BI-FET单运算放⼤器 NS[DATA] LF398 采样保持放⼤器 NS[DATA] LF411 BI-FET单运算放⼤器 NS[DATA] LF412 BI-FET双运放⼤器 NS[DATA] LM124 低功耗四运算放⼤器(军⽤档) NS[DATA]/TI[DATA] LM1458 双运算放⼤器 NS[DATA] LM148 四运算放⼤器 NS[DATA] LM224J 低功耗四运算放⼤器(⼯业档)NS[DATA]/TI[DATA] LM2902 四运算放⼤器 NS[DATA]/TI[DATA] LM2904 双运放⼤器 NS[DATA]/TI[DATA] LM301 运算放⼤器 NS[DATA] LM308 运算放⼤器 NS[DATA] LM308H 运算放⼤器（⾦属封装） NS[DATA] LM318 ⾼速运算放⼤器NS[DATA] LM324(NS[DATA]) 四运算放⼤器 HA17324,/LM324N(TI) LM348 四运算放⼤器 NS[DATA] LM358 NS[DATA] 通⽤型双运算放⼤器 HA17358/LM358P(TI) LM380 ⾳频功率放⼤器NS[DATA] LM386-1 NS[DATA] ⾳频放⼤器NJM386D,UTC386 LM386-3 ⾳频放⼤器 NS[DATA] LM386-4 ⾳频放⼤器 NS[DATA] LM3886 ⾳频⼤功率放⼤器 NS[DATA] LM3900 四运算放⼤器 LM725 ⾼精度运算放⼤器NS[DATA] LM733 带宽运算放⼤器 LM741 NS[DATA] 通⽤型运算放⼤器HA17741 MC34119 ⼩功率⾳频放⼤器 NE5532 ⾼速低噪声双运算放⼤器 TI[DATA] NE5534 ⾼速低噪声单运算放⼤器TI[DATA] NE592 视频放⼤器 OP07-CP 精密运算放⼤器 TI[DATA] OP07-DP 精密运算放⼤器 TI[DATA] TBA820M ⼩功率⾳频放⼤器 ST[DATA] TL061 BI-FET单运算放⼤器 TI[DATA] TL062 BI-FET双运算放⼤器 TI[DATA] TL064 BI-FET 四运算放⼤器 TI[DATA] TL072 BI-FET双运算放⼤器 TI[DATA] TL074 BI-FET四运算放⼤器 TI[DATA] TL081 BI-FET单运算放⼤器TI[DATA] TL082 BI-FET双运算放⼤器 TI[DATA] TL084 BI-FET四运算放⼤器 TI[DATA] AD824 JFET输⼊,单电源,低电压,低功耗,精密四运算放⼤器 MC33171 单电源,低电压,低功耗运算放⼤器 AD826 低功耗,宽带,⾼速双运算放⼤器 MC33172 单电源,低电压,低功耗双运算放⼤器AD827 低功耗,⾼速双运算放⼤器 MC33174 单电源,低电压,低功耗四运算放⼤器 AD828 低功耗,宽带,⾼速双运算放⼤器 MC33178 ⼤电流,低功耗,低噪⾳双运算放⼤器 AD844 电流反馈型,宽带,⾼速运算放⼤器 MC33179 ⼤电流,低功耗,低噪⾳四运算放⼤器 AD846 电流反馈型,⾼速,精密运算放⼤器 MC33181 JFET输⼊,低功耗运算放⼤器 AD847 低功耗,⾼速运算放⼤器 MC33182 JFET输⼊,低功耗双运算放⼤器AD8531 COMS单电源,低功耗,⾼速运算放⼤器 MC33184 JFET 输⼊,低功耗四运算放⼤器 AD8532 COMS单电源,低功耗,⾼速双运算放⼤器 MC33201 单电源,⼤电流,低电压运算放⼤器AD8534 COMS单电源,低功耗,⾼速四运算放⼤器 MC33202 单电源,⼤电流,低电压双运算放⼤器 AD9617 低失真，电流反馈型,宽带,⾼速,精密运算放⼤器 MC33204 单电源,⼤电流,低电压四运算放⼤器 AD9631 低失真，宽带,⾼速运算放⼤器MC33272 单电源,低电压,⾼速双运算放⼤器 AD9632 低失真，宽带,⾼速运算放⼤器 MC33274 单电源,低电压,⾼速四运算放⼤器 AN6550 低电压双运算放⼤器 MC33282 JFET输⼊,宽带,⾼速双运算放⼤器AN6567 ⼤电流,单电源双运算放⼤器 MC33284 JFET输⼊,宽带,⾼速四运算放⼤器 AN6568 ⼤电流,单电源双运算放⼤器 MC33502 BIMOS,单电源,⼤电流,低电压,双运算放⼤器 BA718 单电源,低功耗双运算放⼤器MC34071A 单电源,⾼速运算放⼤器 BA728 单电源,低功耗双运算放⼤器 MC34072A 单电源,⾼速双运算放⼤器 CA5160 BIMOS,单电源,低功耗运算放⼤器 MC34074A 单电源,⾼速四运算放⼤器 CA5260 BIMOS,单电源双运算放⼤器 MC34081 JFET输⼊,宽带,⾼速运算放⼤器 CA5420 BIMOS,单电源,低电压,低功耗运算放⼤器 MC34082 JFET输⼊,宽带,⾼速双运算放⼤器 CA5470 BIMOS单电源四运算放⼤器 MC34084 JFET输⼊,宽带,⾼速四运算放⼤器CLC400 电流反馈型,宽带,⾼速运算放⼤器 MC34181 JFET输⼊,低功耗运算放⼤器 CLC406 电流反馈型,低功耗,宽带,⾼速运算放⼤器 MC34182 JFET输⼊,低功耗双运算放⼤器 CLC410 电流反馈型,⾼速运算放⼤器 MC34184 JFET输⼊,低功耗四运算放⼤器 CLC415 电流反馈型,宽带,⾼速四运算放⼤器 MC35071A 单电源,⾼速运算放⼤器 CLC449 电流反馈型,宽带,⾼速运算放⼤器 MC35072A 单电源,⾼速双运算放⼤器 CLC450 电流反馈型,单电源,低功耗,宽带,⾼速运算放⼤器 MC35074A 单电源,⾼速四运算放⼤器 CLC452 单电源,电流反馈型,⼤电流,低功耗,宽带,⾼速运算放⼤器 MC35081 JFET输⼊,宽带,⾼速运算放⼤器CLC505 电流反馈型,⾼速运算放⼤器 MC35082 JFET输⼊,宽带,⾼速双运算放⼤器 EL2030 电流反馈型,宽带,⾼速运算放⼤器 MC35084 JFET输⼊,宽带,⾼速四运算放⼤器 EL2030C 电流反馈型,宽带,⾼速运算放⼤器 MC35171 单电源,低电压,低功耗运算放⼤器 EL2044C 单电源,低功耗,⾼速运算放⼤器 MC35172 单电源,低电压,低功耗双运算放⼤器 EL2070 电流反馈型,宽带,⾼速运算放⼤器 MC35174 单电源,低电压,低功耗四运算放⼤器 EL2070C 电流反馈型,宽带,⾼速运算放⼤器 MC35181 JFET输⼊,低功耗运算放⼤器 EL2071C 电流反馈型,宽带,⾼速运算放⼤器 MC35182 JFET输⼊,低功耗双运算放⼤器 EL2073 宽带,⾼速运算放⼤器 MC35184 JFET输⼊,低功耗四运算放⼤器 EL2073C 宽带,⾼速运算放⼤器 MM6558 低电压,低失调电压,精密双运算放⼤器 EL2130C 电流反馈型,宽带,⾼速运算放⼤器MM6559 低电压,低失调电压,精密双运算放⼤器 EL2150C 单电源,宽带,⾼速运算放⼤器 MM6560 低电压,低失调电压,精密双运算放⼤器 EL2160C电流反馈型,宽带,⾼速运算放⼤器 MM6561 低功耗,低电压,低失调电压,精密双运算放⼤器 EL2165C 电流反馈型,宽带,⾼速,精密运算放⼤器 MM6564 单电源,低电压,低功耗,低失调电压,精密双运算放⼤器 EL2170C 单电源,电流反馈型,低功耗,宽带,⾼速运算放⼤器MM6572 低噪⾳,低电压,低失调电压,精密双运算放⼤器 EL2175C 电流反馈型,宽带,⾼速,精密运算放⼤器 NE5230单电源,低电压运算放⼤器 EL2180C 单电源,电流反馈型,低功耗,宽带,⾼速运算放⼤器NE5512 通⽤双运算放⼤器 EL2224 宽带,⾼速双运算放⼤器 NE5514 通⽤四运算放⼤器 EL2224C 宽带,⾼速双运算放⼤器NE5532 低噪⾳,⾼速双运算放⼤器 EL2232 电流反馈型,宽带,⾼速双运算放⼤器NE5534 低噪⾳,⾼速运算放⼤器 EL2232C 电流反馈型,宽带,⾼速双运算放⼤器 NJM2059 通⽤四运算放⼤器 EL2250C 单电源,宽带,⾼速双运算放⼤器 NJM2082 JFET输⼊,⾼速双运算放⼤器 EL2260C 电流反馈型,宽带,⾼速双运算放⼤器 NJM2107低电压,通⽤运算放⼤器 EL2270C 单电源,电流反馈型,低功耗,宽带,⾼速双运算放⼤器 NJM2112 低电压,通⽤四运算放⼤器EL2280C 单电源,电流反馈型,低功耗,宽带,⾼速双运算放⼤器 NJM2114 低噪⾳双运算放⼤器 EL2424 宽带,⾼速四运算放⼤器NJM2115 低电压,通⽤双运算放⼤器 EL2424C 宽带,⾼速四运算放⼤器 NJM2119 单电源,精密双运算放⼤器 EL2444C 单电源,低功耗,⾼速四运算放⼤器 NJM2122 低电压,低噪⾳双运算放⼤器 EL2450C 单电源,宽带,⾼速四运算放⼤器 NJM2130F 低功耗运算放⼤器 EL2460C 电流反馈型,宽带,⾼速四运算放⼤器 NJM2132 单电源,低电压,低功耗双运算放⼤器 EL2470C 单电源,电流反馈型,低功耗,宽带,⾼速四运算放⼤器 NJM2136 低电压,低功耗,宽带,⾼速运算放⼤器 EL2480C 单电源,电流反馈型,低功耗,宽带,⾼速四运算放⼤器NJM2137 低电压,低功耗,宽带,⾼速双运算放⼤器 HA-2640 ⾼耐压运算放⼤器 NJM2138 低电压,低功耗,宽带,⾼速四运算放⼤器 HA-2645 ⾼耐压运算放⼤器 NJM2140 低电压双运算放⼤器 HA-2839 宽带,⾼速运算放⼤器NJM2141 ⼤电流,低电压双运算放⼤器 HA-2840 宽带,⾼速运算放⼤器 NJM2147 ⾼耐压,低功耗双运算放⼤器 HA-2841 宽带,⾼速运算放⼤器 NJM2162 JFET输⼊,低功耗,⾼速双运算放⼤器HA-2842 宽带,⾼速运算放⼤器 NJM2164 JFET输⼊,低功耗,⾼速四运算放⼤器 HA-4741 通⽤四运算放⼤器 NJM3404A 单电源,通⽤双运算放⼤器 HA-5020 电流反馈型,宽带,⾼速运算放⼤器 NJM3414 单电源,⼤电流双运算放⼤器 HA-5127 低噪⾳,低失调电压,精密运算放⼤器 NJM3415 单电源,⼤电流双运算放⼤器 HA-5134 低失调电压,精密四运算放⼤器 NJM3416 单电源,⼤电流双运算放⼤器 HA-5137 低噪⾳,低失调电压,⾼速,精密运算放⼤器 NJM4556A ⼤电流双运算放⼤器 HA-5142 单电源,低功耗双运算放⼤器NJM4580 低噪⾳双运算放⼤器 HA-5144 单电源,低功耗四运算放⼤器 NJU7051 CMOS单电源,低功耗,低电压,低失调电压运算放⼤器 HA-5177 低失调电压,精密运算放⼤器 NJU7052 CMOS单电源,低功耗,低电压,低失调电压双运算放⼤器 HA-5221 低噪⾳,精密运算放⼤器 NJU7054 CMOS单电源,低功耗,低电压,低失调电压四运算放⼤器 HA-5222 低噪⾳,精密双运算放⼤器 NJU7061 CMOS单电源,低功耗,低电压,低失调电压运算放⼤器 HA-7712 BIMOS,单电源,低功耗,精密运算放⼤器NJU7062 CMOS单电源,低功耗,低电压,低失调电压双运算放⼤器 HA-7713 BIMOS,单电源,低功耗,精密运算放⼤器 NJU7064 CMOS单电源,低功耗,低电压,低失调电压四运算放⼤器 HA16118 CMOS单电源,低电压,低功耗双运算放⼤器 NJU7071 CMOS 单电源,低功耗,低电压,低失调电压运算放⼤器 AD704 低偏置电流,低功耗,低失调电压,精密四运算放⼤器 MAX430 CMOS单电源运算放⼤器 AD705 低偏置电流,低功耗,低失调电压,精密运算放⼤器 MAX432 CMOS 单电源运算放⼤器 AD706 低偏置电流,低功耗,低失调电压,精密双运算放⼤器 MAX4330 单电源,低电压,低功耗运算放⼤器 AD707 低失调电压,精密运算放⼤器MAX4332 单电源,低电压,低功耗双运算放⼤器AD708 低失调电压,精密双运算放⼤器 MAX4334 单电源,低电压,低功耗四运算放⼤器 AD711 JFET输⼊,⾼速,精密运算放⼤器 MAX473 单电源,低电压,宽带,⾼速运算放⼤器 AD712 JFET输⼊,⾼速,精密双运算放⼤器 MAX474 单电源,低电压,宽带,⾼速双运算放⼤器 AD713 JFET输⼊,⾼速,精密四运算放⼤器MAX475 单电源,低电压,宽带,⾼速四运算放⼤器AD744 JFET输⼊,⾼速,精密运算放⼤器 MAX477 宽带,⾼速运算放⼤器 AD745 JFET输⼊,低噪⾳,⾼速运算放⼤器 MAX478 单电源,低功耗,精密双运算放⼤器AD746 JFET输⼊,⾼速,精密双运算放⼤器 MAX478A 单电源,低功耗,精密双运算放⼤器 AD795 JFET输⼊,低噪⾳,低功耗,精密运算放⼤器 MAX479 单电源,低功耗,精密四运算放⼤器 AD797 低噪⾳运算放⼤器MAX479A 单电源,低功耗,精密四运算放⼤器 AD8002 电流反馈型,低功耗,宽带,⾼速双运算放⼤器MAX480 单电源,低功耗,低电压,低失调电压,精密运算放⼤器 AD8005 电流反馈型,低功耗,宽带,⾼速双运算放⼤器 MAX492C 单电源,低功耗,低电压,精密双运算放⼤器AD8011 电流反馈型,低功耗,宽带,⾼速运算放⼤器 MAX492E 单电源,低功耗,低电压,精密双运算放⼤器 AD8031 单电源,低功耗,⾼速运算放⼤器 MAX492M 单电源,低功耗,低电压,精密双运算放⼤器 AD8032 单电源,低功耗,⾼速双运算放⼤器MAX494C 单电源,低功耗,低电压,精密四运算放⼤器 AD8041 单电源,宽带,⾼速运算放⼤器 MAX494E 单电源,低功耗,低电压,精密四运算放⼤器 AD8042 单电源,宽带,⾼速双运算放⼤器 MAX494M 单电源,低功耗,低电压,精密四运算放⼤器 AD8044 单电源,宽带,⾼速四运算放⼤器 MAX495C 单电源,低功耗,低电压,精密运算放⼤器 AD8047 宽带,⾼速运算放⼤器 MAX495E 单电源,低功耗,低电压,精密运算放⼤器AD8055 低功耗,宽带,⾼速运算放⼤器 MAX495M 单电源,低功耗,低电压,精密运算放⼤器 AD8056 低功耗,宽带,⾼速双运算放⼤器 MC1458 通⽤双运算放⼤器 AD8072 电流反馈型,宽带,⾼速双运算放⼤器MC1458C 通⽤双运算放⼤器 AD812 电流反馈型,低电压,低功耗,⾼速双运算放⼤器 MC33071A 单电源,⾼速运算放⼤器AD817 低功耗,宽带,⾼速运算放⼤器 MC33072A 单电源,⾼速双运算放⼤器 AD818 低功耗,宽带,⾼速运算放⼤器 MC33074A 单电源,⾼速四运算放⼤器 AD820 JFET输⼊,单电源,低电压,低功耗,精密运算放⼤器 MC33078 低噪⾳双运算放⼤器 AD822 JFET输⼊,单电源,低电压,低功耗,精密双运算放⼤器MC33079 低噪⾳四运算放⼤器 AD823 JFET输⼊,单电源,低电压,低功耗,精密,⾼速双运算放⼤器 MC33102 低功耗双运算放⼤器 HA16119 CMOS单电源,低电压,低功耗双运算放⼤器 NJU7072 CMOS单电源,低功耗,低电压,低失调电压双运算放⼤器 HFA1100 电流反馈型,宽带,⾼速运算放⼤器 NJU7074 CMOS单电源,低功耗,低电压,低失调电压四运算放⼤器 HFA1120 电流反馈型,宽带,⾼速运算放⼤器 OP-07 低漂移,精密运算放⼤器 HFA1205电流反馈型,低功耗,宽带,⾼速双运算放⼤器 OP-113 BICMOS单电源,低噪⾳,低失调电压,精密运算放⼤器 HFA1245 电流反馈型,低功耗,宽带,⾼速双运算放⼤器 OP-150 COMS,单电源,低电压,低功耗 ICL7611 CMOS低电压,低功耗运算放⼤器 OP-160 电流反馈型,⾼速运算放⼤器 ICL7612 CMOS低电压,低功耗运算放⼤器 OP-162 单电源,低电压,低功耗,⾼速,精密运算放⼤器ICL7621 CMOS低电压,低功耗双运算放⼤器 OP-177 低失调电压,精密运算放⼤器 ICL7641 CMOS低电压四运算放⼤器OP-183 单电源,宽带运算放⼤器 ICL7642 CMOS低电压,低功耗四运算放⼤器 OP-184 单电源,低电压,⾼速,精密运算放⼤器ICL7650S 稳压器 OP-191 单电源,低电压,低功耗运算放⼤器 LA6500 单电源，功率OP 放⼤器 OP-193 单电源,低电压,低功耗,精密运算放⼤器 LA6501 单电源，功率OP放⼤器 OP-196 单电源,低电压,低功耗运算放⼤器 LA6510 2回路单电源功率OP放⼤器 OP-200 低功耗,低失调电压,精密双运算放⼤器" LA6512 ⾼压,功率OP放⼤器双运算放⼤器 OP-213 BICMOS单电源,低噪⾳,低失调电压,精密双运算放⼤器 LA6513 ⾼压,功率OP放⼤器双运算放⼤器 OP-250 COMS,单电源,低电压,低功耗双运算放⼤器LA6520 单电源,功率OP放⼤器三运算放⼤器 OP-260 电流反馈型,⾼速双运算放⼤器 LF356 JFET输⼊，⾼速运算放⼤器 OP-262 单电源,低电压,低功耗,⾼速,精密双运算放⼤器 LF356A JFET输⼊，⾼速运算放⼤器 OP-27 低噪⾳,低失调电压,精密运算放⼤器 LF411 JFET输⼊，⾼速运算放⼤器 OP-270 低噪声,低失调电压,精密双运算放⼤器 LF411A JFET输⼊，⾼速运算放⼤器 OP-271 精密双运算放⼤器 LF412 JFET输⼊，⾼速双运算放⼤器 OP-275 ⾼速双运算放⼤器 LF412A JFET输⼊，⾼速双运算放⼤器 OP-279 单电源,⼤电流双运算放⼤器 LF441 低功耗，JFET输⼊运算放⼤器 OP-282 JFET输⼊,低功耗双运算放⼤器 LF441A 低功耗，JFET输⼊运算放⼤器 OP-283 单电源,宽带双运算放⼤器 LF442 低功耗，JFET输⼊双运算放⼤器 OP-284 单电源,低电压,⾼速,精密双运算放⼤器 LF442A 低功耗，JFET输⼊双运算放⼤器OP-290 单电源,低功耗,精密双运算放⼤器 LF444 低功耗，JFET输⼊四运算放⼤器 OP-291 单电源,低电压,低功耗双运算放⼤器 LF444A 低功耗，JFET输⼊四运算放⼤器 OP-292 BICMOS单电源,通⽤双运算放⼤器 LM2902 单电源四运算放⼤器 OP-293 单电源,低电压,低功耗,精密双运算放⼤器 LM2904 单电源双运算放⼤器 OP-295 BICMOS低功耗,精密双运算放⼤器 LM324 单电源四运算放⼤器 OP-296 单电源,低电压,低功耗双运算放⼤器 LM358 单电源双运算放⼤器 OP-297 低电压,低功耗,低漂移,精密双运算放⼤器LM4250 单程控、低功耗运算放⼤器 OP-37 低噪⾳,低失调电压,⾼速,精密运算放⼤器 LM607 低失调电压,精密运算放⼤器 OP-400 低功耗,低失调电压,精密四运算放⼤器 LM6118 宽带,⾼速双运算放⼤器OP-413 BICMOS单电源,低噪⾳,低失调电压,精密四运算放⼤器。
CS6R-395 400 405 410 415 420 MS 395 W 高功率更可靠的模块 包含
CS6R-395|400|405|410|415|420MS395 W ~ 420 WMORE POWERMORE RELIABLEComprehensive LID / LeTID mitigation technology, up to 50% lower degradation Module power up to 420 W Module efficiency up to 21.5%420 WMinimizes micro-crack impactsBetter shading toleranceLower LCOE & system costCSI Solar Co., Ltd. is committed to providing high quality solar photovoltaic modules, solar energy and battery storage solutions to customers. The company was recognized as the No. 1 module supplier for quality and performance/price ratio in the IHS Module Customer Insight Survey. Over the past 22 years, it has successfully delivered over 88 GW of premium-quality solar modules across the world.* For detailed information, please refer to the Installation Manual.Heavy snow load up to 5400 Pa, wind load up to 2400 Pa*HiKu6 Mono PERCCSI Solar Co., Ltd.199LushanRoad,SND,Suzhou,Jiangsu,China,215129,,********************YearsYearsIndustry Leading Product Warranty on Materials and Workmanship*Linear Power Performance Warranty*1st year power degradation no more than 2%Subsequent annual power degradation no more than 0.55%*Subject to the terms and conditions contained in the applicable Canadian Solar Limited Warranty Statement. Also this 25-year limited product warranty is available only for prod -ucts installed and operating on residential rooftops in certain regions.* The specific certificates applicable to different module types and markets will vary, and therefore not all of the certifications listed herein will simultaneously apply to the products you order or use. Please contact your local Canadian Solar sales representative to confirm the specific certificates available for your Product and applicable in the regions in which the products will be used.PRODUCT CERTIFICATES*MANAGEMENT SYSTEM CERTIFICATES*ISO 9001 : 2015 / Quality management systemISO 14001 : 2015 / Standards for environmental management systemISO 45001 : 2018 / International standards for occupational health & safety IEC62941 : 2019 / Photovoltaic module manufacturing quality systemIEC 61215 / IEC 61730 / CE / INMETRO / MCS / UKCAUL 61730 / IEC 61701 / IEC 62716 / IEC 63126 Level1 / IEC 60068-2-68 UNI 9177 Reaction to Fire: Class 1 / Take-e-wayPARTNER SECTIONENGINEERING DRAWING (mm)Rear ViewMounting HoleCS6R-405MS / I-V CURVES* The specifications and key features contained in this datasheet may deviate slightly from our actu -al products due to the on-going innovation and product enhancement. CSI Solar Co., Ltd. reserves the right to make necessary adjustment to the information described herein at any time without further notice.Please be kindly advised that PV modules should be handled and installed by qualified people who have professional skills and please carefully read the safety and installation instructions before using our PV modules.CSI Solar Co., Ltd.199LushanRoad,SND,Suzhou,Jiangsu,China,215129,,********************VA V A1000 W/m 800 W/m 600 W/m400 W/m200 W/m 5°C 25°C 45°C 65°CMECHANICAL DATASpecificationDataCell TypeMono-crystalline Cell Arrangement 108 [2 X (9 X 6) ]Dimensions1722 ˣ 1134 ˣ 30 mm (67.8 ˣ 44.6 ˣ 1.18 in)Weight21.3 kg (47.0 lbs)Front Cover 3.2 mm tempered glass with anti-reflective coatingFrame Anodized aluminium alloy, J-Box IP68, 3 bypass diodesCable4 mm 2 (IEC), 12 AWG (UL)ConnectorT6 or MC4 or MC4-EVO2 or MC4-EVO2ACable Length(Including Connector)Portrait: 350 mm (16.1 in) (+) / 250mm (11.4 in) (-); landscape: 1100mm (43.3 in)*Per Pallet 35 pieces Per Container (40' HQ)910 pieces* For detailed information, please contact your local Canadian Solar sales and technical representatives.141312111098765432105 10 15 20 25 30 35 40 45 50 55 60 5 10 15 20 25 30 35 40 45 50 55 600 ~ + 10 WFrame Cross Section A-A1413121110987654321ELECTRICAL DATA | STC*CS6R395MS 400MS 405MS 410MS 415MS 420MS Nominal Max. Power (Pmax)395 W 400 W 405 W 410 W 415 W 420 W Opt. Operating Voltage (Vmp)30.6 V 30.8 V 31.0 V 31.2 V 31.4 V 31.6 V Opt. Operating Current (Imp)12.91 A 12.99 A 13.07 A 13.15 A 13.23 A 13.31 A Open Circuit Voltage (Voc)36.6 V 36.8 V 37.0 V 37.2 V 37.4 V 37.6 V Short Circuit Current (Isc)13.77 A 13.85 A 13.93 A 14.01 A 14.09 A 14.17 A Module Efficiency 20.2%20.5%20.7%21.0%21.3%21.5%Operating Temperature -40°C ~ +85°CMax. System Voltage 1500V (IEC/UL) or 1000V (IEC/UL)Module Fire Performance TYPE 1 (UL 61730 1500V) or TYPE 2 (UL 61730 1000V) or CLASS C (IEC 61730)Max. Series Fuse Rating 25 A Application Classification Class A Power Tolerance* Under Standard Test Conditions (STC) of irradiance of 1000 W/m 2, spectrum AM 1.5 and cell tempe -rature of 25°C.ELECTRICAL DATA | NMOT*CS6R395MS 400MS 405MS 410MS 415MS 420MS Nominal Max. Power (Pmax)296 W 300 W 304 W 307 W 311 W 315 W Opt. Operating Voltage (Vmp)28.7 V 28.9 V 29.1 V 29.2 V 29.4 V 29.6 V Opt. Operating Current (Imp)10.33 A 10.39 A 10.45 A 10.52 A 10.58 A 10.65 AOpen Circuit Voltage (Voc)34.6 V 34.8 V 35.0 V 35.1 V 35.3 V 35.5 V Short Circuit Current (Isc)11.09 A 11.15 A 11.21 A 11.28 A 11.34 A 11.41 A * Under Nominal Module Operating Temperature (NMOT), irradiance of 800 W/m 2, spectrum AM 1.5, ambient temperature 20°C, wind speed 1 m/s.Mar. 2023. All rights reserved, PV Module Product Datasheet V2.1C25_ENTEMPERATURE CHARACTERISTICSSpecificationData Temperature Coefficient (Pmax)-0.34 % / °C Temperature Coefficient (Voc)-0.26 % / °C Temperature Coefficient (Isc)0.05 % / °CNominal Module Operating Temperature 41 ± 3°C。
Interpoint公司军用电源模块系列
The FMCE-0328 EMI filters reduce the reflected input… Now taking orders for the MFP Series point-of-load DC/DC…
/products/by_application/high_reliability（第 3／6 页）[2011-9-7 10:30:12]
批注本地保存成功开通会员云端永久保存去开通
High Reliability | Products | Crane Aerospace & Electronics - Interpoint - DC/DC Converters for Space, Military and Aerospace
Crane Interpoint: Aerospace & Electronics
The MFL Series 28-volt DC/DC converters are rated up…
The FMCE-0828 EMI filters reduce the reflected input…
FMTR Series™ – 30 Watts
FMD28 Series™ – 7.0 Amps
High Reliability | Products | Crane Aerospace & Electronics - Interpoint - DC/DC Converters for Space, Military and Aerospace
Copyright © 2009-2011 Crane Electronics, Inc. Privacy | Terms of use | Site map | Contact | Crane Co. | Crane Aerospace & Electronics | Power Solutions | Mity | Products | Crane Aerospace & Electronics - Interpoint - DC/DC Converters for Space, Military and Aerospace
DSM 4分之一 砖型模块电源
产品名称
输入电压 输出电压 输出电流 产品级别
电压精度 电压调节
外型尺寸 单位：mm
源效应 负载效应 动态响应 过冲及恢复时间 纹波和噪声 输入反射纹波电流 温度系数 工作频率 启动延迟时间 输出建立时间 遥控方式 效率 过流保护 输出过压保护 输入过欠压保护 输出短路保护 过温保护 隔离电阻 隔离电压
100
效 率 90
百 分
80
比 70
%
60
型号： DSM100-24S28
50 40
30
20
10
0 0 10 20 30 40 50 60 70 80 90 100
效率曲线
负载百分比（%）
高端版标准1/4砖封装单输出20~100W
100
功 率 百 80 分 比
% 60
24
18~36
24
18~36
24
18~36
24
18~36
24
18~36
24
18~36
24
18~36
48
36~72
48
36~72
48
36~72
48
36~72
48
36~72
48
36~72
48
36~72
48
36~72
48
36~72
48
36~72
输出电压 （VDC）
2.5 3.3 5 9 12 15 19 24 28 48 2.5 3.3 5 9 12 15 19 24 28 48 2.5 3.3 5 9 12 15 19 24 28 48 2.5 3.3 5 9 12 15 19 24 28 48
基板温度
博士安全B520辅助电源模块说明书
u为防火或防盗应用提供高达2 A 的12 V 待机电流（4 A 的盗警电流）u分别监测多达两个12 V 7-18 Ah 电池（多达36 Ah 的容量）u 提供多达80个小时的待机时间u 方便读取式开关寻址u使用博世标准TR1850插入式变压器B520辅助电源模块是一个辅助电源扩展设备，可通过SDI2总线连接到兼容的报警主机。
此模块受到监测并将所有状态更改传递给报警主机。
工业、商业和机构设施是B520模块的典型安装。
B520地址开关可用于实现轻松设备寻址。
SDI2输出端子为SDI2扩展设备（如键盘）提供辅助电源。
AUX PWR 端子为其他设备（如PIR 移动探测器）提供增强型辅助电源功能。
功能监测监控此模块通过SDI2总线监控并传送有关以下内容的状态信息：•操作（检测信号）•电池1 (BATT 1)•电池2 (BATT 2)•AC 输入电源(AC)•电池电量充足•电池电量不足•电池缺失指示灯•检测信号 [图标]。
当系统正常运行时，蓝色LED 指示灯闪烁亮起和熄灭。
LED 指示灯持续亮起或熄灭指示系统故障。
闪烁三次指示通信故障。
•BATT 1 LED 指示灯。
LED 指示灯呈绿色持续亮起指示BATT 1的电池状态正常工作。
闪烁指示电池电量不足。
闪烁三次指示电池充电器故障。
LED 指示灯熄灭指示电池缺失。
•BATT 2 LED 指示灯。
LED 指示灯呈绿色持续亮起指示BATT 2的电池状态正常工作。
闪烁指示电池电量不足。
闪烁三次指示电池充电器故障。
LED 指示灯熄灭指示电池缺失。
•AC LED 指示灯。
LED 指示灯呈绿色持续亮起指示AC 电源正在工作。
正在执行电池测试时会产生脉冲式LED 指示灯（每秒3个脉冲）。
闪烁指示AC 电源不足或发生故障。
电池充电在AC 电源发生故障的情况下，连接到电池端子的已充满电的电池将为B520提供电源。
如果B520的AC 电源输入发生故障（缺失或电量低），则B520将自动从主电源(AC)切换到备用电源（电池）。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
-
IO=80A，带宽 BW≤20MHz
-
TC=25℃ 输出外接 15μF 低 ESR
-
钽电V容I=加1551VμF～瓷42片5V电容
-
输出电压下降 10%
88
满载，电阻负载
-
TC=25℃，IO≤80A，P≤400W -20
IO≤80A，P≤400W
5.6
满载
-
TC=25℃BU，CK满+L载LC 两级拓扑 360
400W 270Vin 5Vout 全砖军用模块电源 LWF400-270S05PM
1 产品特点 输入电压范围：155V～425V 瞬态工作电压：475V/1s 输 出 ： 5V/80A/400W 输出可调范围：80%～110% 转换效率：Up to 88% 副边均流（4 只并联） 输入输出隔离 温度范围：-55℃～100℃ 外形尺寸：119.0×62.9×13.0mm 重量：小于 270g 可替换 SynQor 公司产品 MCOTS-C-270-05-FT
产品手册
2 概述 LWF400-270S05P8%，额定
输出电压 5V，输出电流 80A。该模块具有并联均流功能，工作温度范围是：-55C～ +100C。 该产品采用宽温度范围的 PCB 印制电路板和元器件，主要工艺过程包括表面贴装、引
单位
V
% % mV mV A A μF % V ms ms MΩ ℃ % % 只
4 引出端说明
（俯视图，引脚向上）
引出端 1 2 3 4 5 6 7 8 9
符号 SyncIn SyncOut ON/OFF(+) ON/OFF(-) Vin(+) Vin(-) Vaux Start Sync I Share
输入→输出施加 500VDC
100
IO≤80A，P≤400W
-
TC=25℃
-
TC=25℃
-
-
-
5.12
0.1 0.3
0.1 0.3
200 400
40
80
-
80
100 112
- 2000
-
10
6.3 6.9
90
-
400 440
-
-
-
125
88
-
90
-
-
4
注：以上指标为部分主要指标，更详细指标请查阅产品详细规范。
功能 同步输入 同步输出 电源模块开关，以-ON/OFF 为参考
隔离地 输入电压正端 输入电压负端 辅助电源，以 Vout(-)为参考
启机同步 均流信号
引出端 10 11 12 13 14 15 16 17 18
产品手册
符号 TRIM SENSE(+) SENSE(-) Vout(-) Vout(-) Vout(-) Vout(+) Vout(+) Vout(+)
线焊接、耐高温塑料外壳灌封，产品满足 SJ20668-1998《微电路模块总规范》的要求。
产品手册
3 技术性能
特性
条件 ( 除 非 另 有 规 定 外 ,-55 ℃ ≤ TC ≤ 100℃,VI=270V±1V,)
极限值 最小 典型 最大
输出电压
电压调整率
负载调整率
输出纹波
峰-峰值
电压
有效值
输出电流
输出过流保护点
容性负载
输出电压调整 a
输出过压保护点
输出电压上升时间
启动禁止时间
绝缘电阻
过温保护点 a
效率
100%负载 50%负载
驱动能力
TC=25℃ IO=80A
4.95 5.0 5.05
TC=-55℃、100℃，VI=155V～ 4.8
VI=155V～425V, IO=80A
-
IO=0A→80A
功能 输出电压调整 远端补偿正端 远端补偿负端 输出电压负端 输出电压负端 输出电压负端 输出电压正端 输出电压正端 输出电压正端
5 封装外形尺寸(单位：毫米)
注：1、PCB 布板时应以详细规范为准，以上外形尺寸图仅供参考； 2、通孔和螺纹孔可选
6 典型应用
产品手册
典型应用图
模块并联均流连接图