LPR5150ALTR;LPR5150AL;中文规格书,Datasheet资料
海洋显示和计算器MC-5150-AC DC x86 ECDIS电脑说明书
MC-5150-AC/DCThe MC-5150-AC/DC computers feature the Intel ® Core ™ i5 520E processor and come with 4 serial ports, 2 Gigabit Ethernet ports, 6 USB hosts, and 8 NMEA ports. The computers offer high performance and versatile peripherals for marine applications.Designed with highest quality and durability in mind, the marine-grade MC-5150-AC/DC computers feature a rugged chassis proven against 1G anti-vibration, providing a most reliable platform even in harshenvironments. In addition, the compact size, fanless design, and low power consumption deliver an optimal thermal solution, making installations easy for bridge systems in marine ers can easily install Windows XP Embedded, XP Professional, or Windows 7 for a flexible and friendly system development and user environment.AC/DC Model Front ViewOverviewAppearanceLPT PortPorts x 2 (type A)(Power, Storage)AC Model Rear ViewDC Model Rear ViewSpecificationsKeyboard DVI-I/VGA(DC 24V)Keyboard DVI-I/VGA ComputerCPU: Intel® Core™ i5-520E (BGA CPU package), dual core threaded 64 bit 2.4 GHz processorOS: Windows 7, Windows XP SP3, Windows XP Embedded (must be installed by the user)System Chipset: Intel® QM57 Express Chipset FSB: 1066System Memory: 8 GB capacity, 2 GB pre-installed: 2 slots 4 GB DDR3-1066 204 pin SO-DIMM SDRAM USB: USB 2.0 hosts x 6, Type A connectors Storage:• 1 internal SATA storage tray• 1 removable SATA storage drive trayOther PeripheralsAudio: line-in/out interfaceKB/MS: 2 PS/2 interfaces supporting standard PS/2 keyboard and mouseDisplayDisplay Interface:• VGA Interface: 15-pin D-Sub connector (female), with resolution up to 1920 x 1080• DVI-I Interface: 29-pin DVI-I connector (female)Graphics Controller: Onboard Intel® HD graphicsEthernet Interface LAN: 2 auto-sensing 10/100/1000 Mbps ports (RJ45)Magnetic Isolation Protection: 1.5 KV built inSerial InterfaceSerial Standards:• 2 RS-232/422/485 ports, software-selectable (DB9 male) • 2 RS-232 ports (DB9)• 8 NMEA ports (Phoenix 3.81 mm compatible connector)Serial Communication ParametersData Bits: 5, 6, 7, 8Stop Bits: 1, 1.5, 2Parity: None, Even, Odd, Space, MarkFlow Control: RTS/CTS, XON/XOFF, ADDC® (automatic data direction control) for RS-485Baudrate: 50 bps to 230.4 KbpsSerial SignalsRS-232: TxD, RxD, DTR, DSR, RTS, CTS, DCD, GND RS-422: TxD+, TxD-, RxD+, RxD-, GND RS-485-4w: TxD+, TxD-, RxD+, RxD-, GND RS-485-2w: Data+, Data-, GNDLEDsSystem: Storage, PowerLAN: 100M/Link x 2, 1000M/Link x 2 (on connector)Physical CharacteristicsHousing: Aluminum, sheet metal Weight: 6.85 kg Dimensions:• Without ears: 287 x 250 x 135 mm (11.30 x 9.84 x 5.31 in) • With ears: 287 x 290 x 140 mm (11.30 x 11.42 x 5.51 in)Mounting: WallEnvironmental LimitsOperating Temperature: -15 to 55°C (5 to 131°F)Storage Temperature: -20 to 60°C (-4 to 131°F)Ambient Relative Humidity: 5 to 95% (non-condensing)Anti-Vibration:•***********(ClassA),sinewave,2-100Hz,1Oct./min.,1.5hr per axis•************,randomwave,3-100Hz,2.5hrperaxis•***********(ClassC),sinewave,2-50Hz,1Oct./min.,1.5hr per axisPower RequirementsInput Voltage:• DC Model: 24 VDC (with tolerance from 18 to 30 VDC, 2-pin terminal block)• AC Model: 100 to 240 VACPower Consumption: Less than 100 W, 2.5 A @ 24 VDCStandards and CertificationsSafety: UL 60950-1, DNV 2.4, IEC 60945 (4th), IACS E10, CCC (GB4943, GB9254, GB17625.1)EMC: EN 55032 Class B, EN 55024, FCC Part 15 Subpart B Class B Marine: IEC 60945 4th, IACS E10Green Product: RoHS, cRoHS, WEEEReliability MTBF (mean time between failures): 220,490 hrs WarrantyWarranty Period: 3 yearsDetails: See /warrantyOrdering InformationAvailable ModelsMC-5150-AC: x86-based ECDIS computer with Intel® Core™ i5 CPU processor, 4 serial ports, 8 NMEA ports, 2 Gigabit Ethernet ports, 6 USB hosts, storage, VGA/DVI, and AC power input MC-5150-DC: x86-based ECDIS computer with Intel® Core™ i5 CPU processor, 4 serial ports, 8 NMEA ports, 2 Gigabit Ethernet ports, 6 USB hosts, storage, VGA/DVI, and DC power input Optional Accessories (for AC models only, can be purchased separately) PWC-C13US-3B-183: Power cord with 3-pin connector, USA plugPWC-C13EU-3B-183: Power cord with 3-pin connector, Euro plugPWC-C13UK-3B-183: Power cord with 3-pin connector, British plugPWC-C13AU-3B-183: Power cord with 3-pin connector, Australia plugPWC-C13CN-3B-183: Power cord with 3-pin connector, China plug Package Checklist• MC-5150 computer• 2 removable storage protection keys• 8 screws for internal and removable HDD• Terminal block for power input (DC model only)• 8 terminal blocks for NMEA ports• Documentation and driver CD• Quick installation guide (printed)• Warranty card。
514中文说明书
. /_
/_ μ 8 ܖ
ˏ ၠූ
-
ၠ
-
p
p ඪ/_
-) )
d,- $ (-e
ඪ /_ ऋķś
ݖķś Ĝ×-
)- /_ " " " " O %%. ቱූ ´t) ቱූ #/ ݖ Oቱූ Ĝ×-
操作前的准备
基本接线图
①、推荐“0V/公共端”接地,若一个系统中有多台调速器,请将所有的”0V/公共端”连接在一起 一点接地. ②、当调速器使用电流控制时，端子 14 和 15 需要短接作为堵转过载信号。
ȩ
Ĝ
ҧ 2 // s Ƒؽ
!! !! !! ' !! ' !! !! 8 h !! ࢠ֧ Ѥ !! ๛ ඥ Ѥ V (! $)* + Ѥ !! ๛ ඥ Ѥ V (! $)* + Ѥ !! ๛ ඥ Ѥ V (! $)* + , Ѥ V (! $)* + , Ѥ V (! $)* + !! ' !! '
జnj
Ȓ̵O
ඥ ffffffffffffffffffffffff ඥ ffffffffffffffffffff Ѥ-fffffffffffffffffffffffff Ѥᇍfffffffffffffffffff -˫fffffffffffffffffffffffff ঠѤfffffffffffffffffffffffff ͵ Ѥfffffffffffffffffffffffff ᇏW8 Ѥfffffffffffffffffffffff njᇕ fffffffffffffffffffffffff < ͩ$ ᇍfffffffffffffffffff
CHEMLOK 5150 产品安全数据表说明书
USA SAFETY DATA SHEET3000000027601. CHEMICAL PRODUCT AND COMPANY IDENTIFICATIONProduct name: CHEMLOK 5150 Product Use/Class:AdhesiveLORD Corporation 111 LORD DriveCary, NC 27511-7923 USATelephone: 814 868-3180Non-Transportation Emergency: 814 763-2345 Chemtrec 24 Hr Transportation Emergency No.800 424-9300 (Outside Continental U.S. 703 527-3887)EFFECTIVE DATE: 08/07/20172. HAZARDS IDENTIFICATIONGHS CLASSIFICATION:Flammable liquids Category 2 Acute toxicity Oral Category 4Acute toxicity Inhalation - Vapours Category 3Acute toxicity Inhalation - Dust and Mist Category 2 Serious eye damage/eye irritation Category 2A Reproductive toxicity Category 1ASpecific target organ systemic toxicity (single exposure) Category 1 Central nervous system, retina, Systemic toxicity, EyesSpecific target organ systemic toxicity (single exposure) Category 3Specific target organ systemic toxicity (repeated exposure) Category 1 Liver, Central nervous system, Eyes, retina Specific target organ systemic toxicity (repeated exposure) Category 2 Nervous system Hazardous to the aquatic environment - acute hazard Category 3 Hazardous to the aquatic environment - chronic hazard Category 3GHS LABEL ELEMENTS: Symbol(s)Signal WordD ANGERHazard StatementsHighly flammable liquid and vapor. Harmful if swallowed. Fatal if inhaled.Causes serious eye irritation.May damage fertility or the unborn child.Causes damage to organs.(Central nervous system, retina, Systemic toxicity, Eyes) May cause respiratory irritation. May cause drowsiness or dizziness.Causes damage to organs through prolonged or repeated exposure.(Liver, Central nervous system, Eyes, retina) May cause damage to organs through prolonged or repeated exposure.(Nervous system) Harmful to aquatic life.Harmful to aquatic life with long lasting effects.Precautionary StatementsPreventionKeep away from heat/sparks/open flames/hot surfaces. - No smoking.Ground/Bond container and receiving equipment.Use explosion-proof electrical/ventilating/lighting equipment.Use only non-sparking tools.Take precautionary measures against static discharge.Obtain special instructions before use.Do not handle until all safety precautions have been read and understood.Wear protective gloves/protective clothing/eye protection/face protection.Use personal protective equipment as required.Wear respiratory protection.Do not breathe dust/fume/gas/mist/vapors/spray.Wash thoroughly after handling.Do not eat, drink or smoke when using this product.Use only outdoors or in a well-ventilated area.Avoid release to the environment.ResponseIn case of fire: refer to section 5 of SDS for extinguishing media.Immediately call a POISON CENTER or doctor/physician.Specific treatment is urgent (see supplemental first aid instructions on this label).IF INHALED: Remove to fresh air and keep at rest in a position comfortable for breathing.IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do.Continue rinsing.Rinse mouth.StorageStore in a well-ventilated place. Keep cool.Store in a well-ventilated place. Keep container tightly closed.Store locked up.Disposal:Dispose of contents/container in accordance with waste/disposal laws and regulations of your country or particular locality.Other Hazards:This product contains component(s) which have the following warnings; however based on the GHS classification criteria of your country or locale, the product mixture may be outside the respective category(s).Acute: Vapor harmful; may affect the brain or nervous system causing dizziness, headache or nausea. May cause central nervous system depression characterized by the following progressive steps: headache, dizziness, staggering gait, confusion, unconsciousness or coma. Possible irritation of the respiratory system can occur causing a variety of symptoms such as dryness of the throat, tightness of the chest, and shortness of breath. The silane material in this product can hydrolyze to form ethanol. Ethanol can cause moderate eye irritation, moderate skin irritation; and can be absorbed through the skin causing headache, nausea, and general discomfort. Ethanol is toxic by inhalation. If swallowed, the silane material in this product can hydrolyze in the stomach to form ethanol. Refer to the ethanol warnings on this (M)SDS. Contains methanol; may be harmful or fatal if swallowed; ingestion of methanol may cause blindness or permanent eye damage. Cannot be made non-poisonous. Dermal absorption possible.May cause mild skin irritation.Chronic: May cause kidney damage. May affect the gastrointestinal system. This material contains methanol.Ingestion of methanol may cause permanent eye damage or blindness. ACGIH considers Ethyl alcohol to be an A3 carcinogen (confirmed animal carcinogen with unknown relevance in humans).3. COMPOSITION/INFORMATION ON INGREDIENTSChemical Name CAS Number RangeMethanol67-56-185 - 90%Ethyl alcohol64-17-5 1 - 5%Organic phosphonium chloride salt PROPRIETARY 1 - 5%Any "PROPRIETARY" component(s) in the above table is considered trade secret, thus the specific chemical and its exact concentration is being withheld.4. FIRST AID MEASURESFIRST AID - EYE CONTACT: Flush eyes immediately with large amount of water for at least 15 minutes holding eyelids open while flushing. Get prompt medical attention.FIRST AID - SKIN CONTACT: Flush contaminated skin with large amounts of water while removing contaminated clothing. Wash affected skin areas with soap and water. Get medical attention if symptoms occur.FIRST AID - INHALATION: Move person to fresh air. Restore and support continued breathing. If breathing is difficult, give oxygen. Get immediate medical attention.FIRST AID - INGESTION: If swallowed, do not induce vomiting. Call a physician or poison control center immediately for further instructions. Never give anything by mouth if victim is rapidly losing consciousness, unconscious or convulsing.5. FIRE-FIGHTING MEASURESSUITABLE EXTINGUISHING MEDIA: Carbon Dioxide, Dry Chemical, Foam, Water FogUNSUITABLE EXTINGUISHING MEDIA: Not determined for this product.SPECIFIC HAZARDS POSSIBLY ARISING FROM THE CHEMICAL: Flammable liquid and vapor. Keep containers tightly closed. Isolate from heat, electrical equipment, sparks, open flame, and other sources of ignition. Closed containers may rupture when exposed to extreme heat. Use water spray to keep fire exposed containers cool. During a fire, irritating and/or toxic gases and particulate may be generated by thermal decomposition or combustion.SPECIAL PROTECTIVE EQUIPMENT AND PRECAUTIONS FOR FIRE-FIGHTERS: Wear full firefighting protective clothing, including self-contained breathing apparatus (SCBA). Water spray may be ineffective. If water is used, fog nozzles are preferable.6. ACCIDENTAL RELEASE MEASURESPERSONAL PRECAUTIONS, PROTECTIVE EQUIPMENT, AND EMERGENCY PROCEDURES: Remove all sources of ignition (flame, hot surfaces, and electrical, static or frictional sparks). Avoid breathing vapors. Use self-contained breathing equipment. Avoid contact.ENVIRONMENTAL PRECAUTIONS: Do not contaminate bodies of water, waterways, or ditches, with chemical or used container.METHODS AND MATERIALS FOR CONTAINMENT AND CLEANUP: Keep non-essential personnel a safe distance away from the spill area. Notify appropriate authorities if necessary. Contain and remove with inert absorbent material and non-sparking tools. Avoid contact. Before attempting cleanup, refer to hazard caution information in other sections of the SDS form.7. HANDLING AND STORAGEHANDLING: Keep closure tight and container upright to prevent leakage. Ground and bond containers when transferring material. Because empty containers may retain product residue and flammable vapors, keep away from heat, sparks and flame; do not cut, puncture or weld on or near the empty container. Do not smoke where this product is used or stored. Avoid breathing of vapor or spray mists. Use with adequate ventilation. Avoid skin and eye contact. Wash thoroughly after handling. Do not handle until all safety precautions have been read and understood. Empty containers should not be re-used. Cannot be made non-poisonous.STORAGE: Do not store or use near heat, sparks, or open flame. Store drum out of sun and away from heat. Store only in well-ventilated areas. Do not puncture, drag, or slide container. Keep container closed when not in use. Refer to OSHA29CFR Part 1910.106 "Flammable and Combustible Liquids" for specific storage requirements.INCOMPATIBILITY: Strong acids, bases, and strong oxidizers.8. EXPOSURE CONTROLS/PERSONAL PROTECTION COMPONENT EXPOSURE LIMITChemical Name ACGIH TLV-TWA ACGIH TLV-STELOSHA PEL-TWAOSHA PEL-CEILINGSkinMethanol200 ppm250 ppm260 mg/m3200 ppmN.E.SEthyl alcohol N.E.1,000 ppm1,900 mg/m31,000 ppmN.E.N.A.Organic phosphoniumchloride saltN.E.N.E.N.E. N.E.N.A.N.A. - Not Applicable, N.E. - Not Established, S - Skin DesignationEngineering controls: Sufficient ventilation in pattern and volume should be provided in order to maintain air contaminant levels below recommended exposure limits. Caution: Solvent vapors are heavier than air and collect in lower levels of the work area. Sufficient ventilation (using explosion-proof equipment) should be provided to prevent flammable vapor/air mixtures from accumulating.PERSONAL PROTECTION MEASURES/EQUIPMENT:RESPIRATORY PROTECTION: Use a NIOSH approved chemical/mechanical filter respirator designed toremove a combination of particulates and organic vapor if occupational limits are exceeded. For emergencysituations, confined space use, or other conditions where exposure limits may be greatly exceeded, use an approved air-supplied respirator. For respirator use observe OSHA regulations (29CFR 1910.134) or use in accordance with applicable laws and regulations of your country or particular locality.SKIN PROTECTION: Use neoprene, nitrile, or rubber gloves to prevent skin contact.EYE PROTECTION: Use safety eyewear including safety glasses with side shields and chemical goggles where splashing may occur.OTHER PROTECTIVE EQUIPMENT: Use disposable or impervious clothing if work clothing contamination is likely. Remove and wash contaminated clothing before reuse.HYGIENIC PRACTICES: Wash hands before eating, smoking, or using toilet facility. Do not smoke in anychemical handling or storage area. Food or beverages should not be consumed anywhere this product is handled or stored. Wash thoroughly after handling.9. PHYSICAL AND CHEMICAL PROPERTIESTypical values, not to be used for specification purposes.ODOR: Alcohol VAPOR PRESSURE: N.D.APPEARANCE: Clear VAPOR DENSITY: Heavier than Air PHYSICAL STATE: Liquid LOWER EXPLOSIVE LIMIT: 4.3 %(V)FLASH POINT: 43 °F, 6 °C SetaflashClosed CupUPPER EXPLOSIVE LIMIT: 36.5 %(V)BOILING RANGE: 65 - 100 °C EVAPORATION RATE: Faster than n-butyl-acetate.AUTOIGNITION TEMPERATURE:N.D.DENSITY: 0.82 g/cm3 - 6.85 lb/gal DECOMPOSITION TEMPERATURE:N.D. VISCOSITY, DYNAMIC: N.D.ODOR THRESHOLD: N.D.VISCOSITY, KINEMATIC: N.D.SOLUBILITY IN H2O: Insoluble VOLATILE BY WEIGHT: 94.65 %pH: N.A.VOLATILE BY VOLUME: 96.15 %FREEZE POINT: N.D. VOC CALCULATED: 6.33 lb/gal, 758 g/l COEFFICIENT OF WATER/OILDISTRIBUTION:N.D.LEGEND: N.A. - Not Applicable, N.E. - Not Established, N.D. - Not Determined10. STABILITY AND REACTIVITYHAZARDOUS POLYMERIZATION: Hazardous polymerization will not occur under normal conditions.STABILITY: Product is stable under normal storage conditions.CONDITIONS TO AVOID: High temperatures. Sources of ignition.INCOMPATIBILITY: Strong acids, bases, and strong oxidizers.HAZARDOUS DECOMPOSITION PRODUCTS: Oxides of nitrogen, Carbon monoxide, carbon dioxide, Oxides of silicon11. TOXICOLOGICAL INFORMATIONEXPOSURE PATH: Refer to section 2 of this SDS.SYMPTOMS:Refer to section 2 of this SDS.TOXICITY MEASURES:Chemical Name LD50/LC50Methanol Oral LD50: Rat6,200 mg/kgDermal LD50: Rabbit15,800 mg/kgInhalation LC50: Rat22500 ppm/8 hEthyl alcohol Oral LD50: Rat7,060 mg/kgInhalation LC50: Rat124.7 mg/l/4 hOrganic phosphonium chloride salt Oral LD50: Rat43 mg/kgGHS LC50 (vapour): Acute toxicity point estimate3 mg/l GHS LC50 (dustand mist): Acute toxicity point estimate0.05 mg/lGerm cell mutagenicity: No classification proposedCarcinogenicity: No classification proposedReproductive toxicity: Category 1A - May damage fertility or the unborn child.Components contributing to classification: Methanol.12. ECOLOGICAL INFORMATIONECOTOXICITY:Chemical Name EcotoxicityMethanol Fish: Pimephales promelas28,200 mg/l96 h flow-throughPimephales promelas> 100 mg/l96 h StaticOncorhynchus mykiss19,500 - 20,700 mg/l96 h flow-throughLepomis macrochirus13,500 - 17,600 mg/l96 h flow-throughEthyl alcohol Fish: Pimephales promelas> 100 mg/l96 h StaticPimephales promelas13,400 - 15,100 mg/l96 h flow-throughInvertebrates: Daphnia magna9,268 - 14,221 mg/l48 hDaphnia magna2 mg/l48 h StaticOrganic phosphonium chloride salt N.D.PERSISTENCE AND DEGRADABILITY:Not determined for this product.BIOACCUMULATIVE: Not determined for this product.MOBILITY IN SOIL: Not determined for this product.OTHER ADVERSE EFFECTS: Not determined for this product.13. DISPOSAL CONSIDERATIONSDISPOSAL METHOD: Disposal should be done in accordance with Federal (40CFR Part 261), state and local environmental control regulations. If waste is determined to be hazardous, use licensed hazardous waste transporter and disposal facility.14. TRANSPORT INFORMATIONUS DOT RoadDOT Proper Shipping Name: AdhesivesDOT Hazard Class: 3SECONDARY HAZARD: NoneDOT UN/NA Number: 1133Packing Group: IIEmergency Response Guide Number: 128IATA CargoPROPER SHIPPING NAME: AdhesivesDOT Hazard Class: 3HAZARD CLASS: NoneUN-NUMBER: 1133PACKING GROUP: IIEMS: 3LIMDGPROPER SHIPPING NAME: AdhesivesDOT Hazard Class: 3HAZARD CLASS: NoneUN-NUMBER: 1133PACKING GROUP: IIEMS: F-EThe listed transportation classification applies to non-bulk shipments. It does not address regulatory variations due to changes in package size, mode of shipment or other regulatory descriptors. For the most accurate shipping information, refer to your transportation/compliance department.15. REGULATORY INFORMATIONU.S. FEDERAL REGULATIONS: AS FOLLOWS:SARA SECTION 313This product contains the following substances subject to the reporting requirements of Section 313 of Title III of the Superfund Amendment and Reauthorization Act of 1986 and 40 CFR part 372.:Chemical Name CAS Number Weight % Less ThanMethanol67-56-190.0%TOXIC SUBSTANCES CONTROL ACT:INVENTORY STATUSThe chemical substances in this product are on the TSCA Section 8 Inventory.EXPORT NOTIFICATIONThis product contains the following chemical substances subject to the reporting requirements of TSCA 12(B) if exported from the United States:None16. OTHER INFORMATIONUnder HazCom 2012 it is optional to continue using the HMIS rating system. It is important to ensure employees have been trained to recognize the different numeric ratings associated with the HazCom 2012 and HMIS schemes.HMIS RATINGS - HEALTH: 2* FLAMMABILITY: 3 PHYSICAL HAZARD: 1* - Indicates a chronic hazard; see Section 2Revision: Section 2Effective Date: 08/07/2017DISCLAIMERThe information contained herein is, to the best of our knowledge and belief, accurate. However, since the conditions of handling and use are beyond our control, we make no guarantee of results, and assume no liability for damages incurred by use of this material. It is the responsibility of the user to comply with all applicable federal, state and local laws and regulations.。
Nport5150
简介在某些应用场合，串口设备的接口界面可能是RS-232，RS-422或RS-485。
若用户想通过一个设备来实现这些设备的联网，NPort 5150无疑是最好的选择，该设备的串口为RS-232/422/485三合一设计。
根据实际要求，只要适当修改NPort 5150的配置，用户就可以方便地实现对诸如扫瞄器，读卡器，PLC和机械设备的远程监控。
成本低串口设备联网已经是一种极为普遍的应用。
因此，用户期待性价比更高的产品。
除了支持微软和Linux操作系统之外，Moxa还提供了5年质保，NPort 5150无疑是客户最好的选择。
快速定位Moxa提供的Administrator可以帮助客户查看Nport 5150的工作状态。
为了防止客户在配置NPort时将特定的配置信息写入其他NPort，Administrator具备“Locate NPort”功能。
当启用该功能时，被指定的NPor t 5150上的“Ready” LED将会以一秒一次的频率闪烁。
此时，客户便可以根据NPort 5150上LED 闪烁的情况来决定是否更改其配置信息。
特点-低成本、信用卡大小- 支持Windows/Linux COM串口驱动程序模式- 提供包括TCP Server、TCP Client、UDP Server/Client和 Ethernet Modem在内的不同socket操作模式- 无需PC、可通过网络连接两个串口设备的对等连接模式- 易于使用、可用于批量安装的Windows工具- 所有信号内置15 KV突波保护- 支持网络管理协议SNMP MIB-II- 可通过网络Web/Telnet进行配置-LAN以太网：10/100 M，RJ45保护：内建1.5 KV 电磁隔离NPort® 5110串行接口界面：RS-232串口数量：1端口类型：DB9 (针式)波特率：110 ~ 230.4 Kbps信号：TxD，RxD，RTS，CTS，DTR，DSR，DCD，GND串口保护：15 KV ESDNPort® 5130串行接口界面：RS-422/485串口数量：1端口类型：DB9 (Male)波特率：50-921.6 Kbps信号RS-422：Tx+，Tx-，Rx+，Rx-，GNDRS-485 (2线)：Data+，Data-，GNDRS-485 (4线)：Tx+，Tx-，Rx+，Rx-，GND串口保护：15 KV ESDRS-485数据流向：ADDC® (专利保护的数据流向自动控制功能)NPort® 5150串行接口界面：RS-232/422/485串口数量：1端口类型：DB9 (Male)波特率：50 ~ 921.6 Kbps信号RS-232：TxD，RxD，RTS，CTS，DTR，DSR，DCD，GND RS-422：Tx+，Tx-，Rx+，Rx-，GNDRS-485 (2线)：Data+，Data-，GNDRS-485 (4线)：Tx+，Tx-，Rx+，Rx-，GND串口保护：15 KV ESDRS-485数据流向：ADDC® (专利保护的数据流向自动控制功能)电源线保护：4 KV EFT保护，EN61000-4-4，2 KV电涌保护，EN61000-4-5内嵌高级功能：看门狗时钟串行通讯参数校验位：None，Even，Odd，Space，Mark数据位：5，6，7，8停止位：1，1.5，2流控：RTS/CTS，DTR/DSR (仅RS-232)，XON/XOFF软件特点协议：ICMP，IP，TCP，UDP，DHCP，BOOTP，Telnet，DNS，SNMP，HTTP，SMTP工具：NPort® Administrator for Windows 95/98/ME/NT/2000/XP/2003/Vista驱动支持：Windows Real COM driver (for Windows 95, 98, ME,NT, 2000, XP, 2003, Vista, XP x64, 2003 x64, Vista x64),Linux Real TTY driver, Fixed TTY driver (for SCO Unix,SCO OpenServer, UnixWare 7, UnixWare 2.1, SVR 4.2,QNX 4.25, QNX 6, Solaris 10, FreeBSD, AIX 5.x, HP-UX11i)配置：Web浏览器/Telnet console，Windows工具，或串口console 口电源需求电源输入：12 ~ 48 VDC电源功耗：NPort® 5110：128.7 mA@12V，72 mA@24VNPort® 5130：200 mA@12V，106 mA@24VNPort® 5150：200 mA@12V，106 mA@24V机械特性材料：铝质(1 mm)尺寸：50 x 80 x 22 mm (2.05 x 3.15 x 0.87 in)总重量：0.580 kg工作环境工作温度：0 ~ 55 °C (32 ~ 131 °F)，5 ~ 95%RH-40 ~ 75 °C (-40 ~ 167 °F)，宽温型号（NPort 5110-T）存储温度：-20 ~ 85 °C (-4 ~ 185 °F)，5 ~ 95%RH通过认证EMC：CE (EN55022 Class A, EN55024), FCC Part 15 Subpart B Class A安全：UL (UL60950-1), CUL, TüV (EN60950-1)MTBF：NPort® 5110：279122 hrsNPort® 5130：246505 hrsNPort® 5150：246034 hrs保修期5 年可选型号产品编号描述NPort IA5150 1口RS-232/422/485串口设备联网服务器, 2个10/100BaseT(X)(RJ45, Single IP)NPort IA5150I 1口RS-232/422/485串口设备联网服务器, 2个10/100BaseT(X)(RJ45, Single IP), 带2KV光电隔离保护NPort 5150-US1口RS-232/422/485设备联网服务器, 110 VAC, US插头NPort 5150-CN1口RS-232/422/485设备联网服务器, 240 VAC, US插头安装配件产品编号描述DK-35A导轨DIN-Rail 安装套件(35 mm)-。
NCN5150 M-BUS 接收器芯片评估板用户手册说明书
NCN5150SOICGEVBNCN5150NGEVBNCN5150 Evaluation Board User's ManualIntroductionThe NCN5150SOICGEVB and NCN5150QFNGEVB evaluation boards demonstrate the NCN5150 M-BUS transceiver in SOIC and QFN package respectively. These evaluation boards include all external components neededfor operating NCN5150 and demonstrate the small PCBsurface area such an implementation requires.OverviewThe NCN5150 is a single-chip integrated slave transceiver for use in two-wire Meter Bus (M-BUS) slave devices and repeaters. The transceiver provides all of the functions needed to satisfy the European Standards EN 13757−2 and EN 1434−3 describing the physical layer requirements for M-BUS. It includes a programmable power level of up to 2 (SOIC version) or 6 (NQFP version) unit loads, which are available for use in external circuits through a 3.3 V LDO regulator. The NCN5150 can provide communication up to the maximum M-BUS communication speed of 38,400 baud (half-duplex). ApplicationsMulti-energy Utility Meters•Water•Gas•Electricity•Heating SystemsFeatures•Single-chip MBUS Transceiver•UART Communication Speeds Up to 38,400 baud •Integrated 3.3 V VDD LDO Regulator with Extended Peak Current•Capability of 15 mA•Supports Powering Slave Device from the Bus or from External Power Supply•Adjustable I/O Levels•Adjustable Constant Current Sink up to 2 or 6 Unit Loads Depending on the Package•Low Bus V oltage Operation•Extended Current Budget for External Circuits: minimum 0.8 mA•Polarity Independent•Power-Fail Function•Fast Startup − No External Transistor Required on STC Pin•Industrial Ambient Temperature Range of −40°C to+85°C•Available in:♦16-pin SOIC (Pin-to-Pin Compatible withTSS721A)♦20-pin QFN•These are Pb-free DevicesFigure 1. The NCN5150NGEVB Evaluation BoardsEVAL BOARD USER’S MANUALELECTRICAL CHARACTERISTICSTable 1. ELECTRICAL CHARACTERISTICS OF THE NCN5150SOICGEVB AND NCN5150QFNGEVB BOARDSymbolParameter / ConditionValueUnitMinTypMaxBus Voltage V BUSBus Voltage123642VCurrent Drawn from the BusIBUS1 UL1.31.5mAOutput Voltage V DDLDO output3.13.33.6VNCN5150 DESCRIPTIONThe NCN5150 provide a complete transceiver for the Metering Bus (M-BUS). It consists of a transmit block which will translate the logic level uart input to current level signaling on the bus, and a receive block which will translate the voltage-level signaling on the bus to a logic-level uart output. The device includes an echo function which will echo the uart input on the uart output, provided the device is powered. This can be used by the software stack to monitor if the message was transmitted. The high voltage level of the microcontroller interface can be changed by connecting the desired voltage to the VIO pin. By default, this pin isconnected through a 0R resistor to 3.3 V on the evaluation boards.A constant current regulator that will draw a fixed current from the bus, expressed in unit loads (UL). This current is made available to the application through a low-dropout 3.3V regulator. The NCN5150 will detect when the bus is disconnected and provide an early warning to the microcontroller that the 3.3 V supply is about to collapse through the PFb pin.A thermal shutdown protects the device against high junction temperatures.NCN5150SOICGEVB DESCRIPTIONGeneral OverviewThe NCN5192NGEVB evaluation board demonstrates the external components required for the operation of the IC.We will cover the different sections below as well as possible alternatives. A drawing of the board where the different sections are indicated is shown below.Figure 2. Board Drawing with Indication of Different SectionsLoop I/F NCN5150UART I/FSTC CapacitorTest I/FBOM ListTable 2. NCN5150SOICGEVB BILL OF MATERIALSQuantity Reference Part Footprint Comments Manufacturer Product Code 1C11u C06036V3Multicomp MCCA000515 1C2DNP C0603DNP−−DNP R0603DNP−−5R3, R5, R9, R12,R131C3100n C060350 V Multicomp MCCA000256 1C4220u Case E10 V AVX TAJD227K010RNJ 1D11SMA40CAT3G SMA ON Semiconductor1SMA40CAT3G 2J1,J5CON2DNP IMO Precision21.95MH/23J2,J3,J4CON10A DNP Multicomp2214S−10SG−85 2Q1,Q2DNP SOT−23DNP−−4R1, R4, R10, R150R R060362.5 mW Multicomp MC0603WG00000T5E−TR100R R060362.5 mW Multicomp MC0.063W06031%100RFR 6R2, R6, R8, R11,R14, R172R7, R16220R R060362.5 mW Multicomp MC0.063W06031%220RFR 1R1830K R060362.5 mW Multicomp MC0.063W06031%30KFR 1TP1GND DNP−−1TP23V3DNP−−1U1NCN5150SOIC16DNP ON Semiconductor NCN5150DR2GSchematic DiagramFigure 3. Schematic of NCN5150SOICGEVBNCN5150QFNGEVB DESCRIPTIONGeneral OverviewThe NCN5150QFNGEVB evaluation board demonstrates the external components required for the operation of the IC. We will cover the different sectionsbelow as well as possible alternatives. A drawing of the board where the different sections are indicated is shown below.Figure 4. Board Drawing with Indication of Different SectionsLoop I/FNCN5150STC CapacitorLoop I/FTest I/FBOM ListTable 3. NCN5150QFNGEVB BILL OF MATERIALSQuantityReferencePart Footprint Comments Manufacturer Product Code 1C11u C0603 6.3 V MulticompMCCA0005151C2DNP C0603DNP −−1C3100n C060350 V Multicomp MCCA0002561C4220u Case E 10 V AVX TAJD227K010RNJ1C5DNP Case E DNP −−4D1, D2, D4, D5DNP SOD −123DNP−−1D31SMA40CAT3GSMAON Semiconductor 1SMA40CAT3G 4J1, J3, J4, J5CON10A DNP IMO Precision 21.95MH/22J2, J6CON2DNP Multicomp2214S −10SG −852Q1, Q2DNP SOT −23DNP −−10R1,R2,R3,R4,R5,R8,R11,R13,R15,R18DNPDNP −−6R7,R9,R12,R16,R19,R22100R R060362.5 mW Multicomp MC0.063W06031%100RFR 4R6,R14,R17,R200R R060362.5 mW Multicomp MC0603WG00000T5E −TR 2R10, R21220R R060362.5 mW Multicomp MC0.063W06031%220RFR 1R2330K R060362.5 mW MulticompMC0.063W06031%30KFR1TP1GND DNP −−1TP23V3DNP−−1U1NCN5150QFN20ON SampleON SemiconductorNCN5150MNTWGSchematic DiagramFigure 5. Schematic of NCN5150QFNGEVBFUNCTIONAL DESCRIPTIONPower SupplyThe NCN5150 provides power to be used in the application. To do this, the NCN5150 draws a fixed current from the bus. The amount of current drawn is fixed at a number of unit loads (intervals of 1.5 mA) and can be set by changing the value of the RIDD resistor. The SOIC version can support up to 2 UL, while the QFN version can support up to 6 UL. The required resistors for are shown in table xx.Also shown in table xx is the maximum amount of capacitance allowed on the STC pin. This limit will ensure that the transceiver will start up in less than 3 s as required by the M-BUS standard. Using a smaller capacitor on STC is allowed, and will result in faster start-up, but also in a faster shutdown, reducing the time between the early warning PFb toggling (when the bus is removed) and the point where the 3.3V VDD voltage can no longer be maintained. The minimum allowed capacitance on STC is 10 times the capacitance on the VDD pin. The minimum required capacitance on the VDD pin is 1 m F.Table 4. UL, RIDD VALUES, STC CAPACITANCENumber of Unit LoadsRIDDValue Maximum STC Capacitor ValueMin. Avail-able Current 130 k W 330 m F 0.88 mA 213 k W 820 m F 2.10 mA 38.45 k W 1200 m F 3.10 mA 4 6.19 k W 1500 m F 4.20 mA 5 4.87 k W 2200 m F 5.30 mA 64.02 k W2700 m F6.50 mAShown in Figure 6 is the startup sequence of the device.Note that the NCN5150 does not require any external (PMOS) transistor on the STC pin for proper startup. The yellow waveform is the bus voltage, the purple waveform the STC voltage, the green waveform the VDD output, and the blue waveform the TX output.Figure 6. NCN5150 Startup SequenceShown in Figure 7 is the shutdown sequence of the device.The green waveform is the bus voltage, the blue waveform is the VDD output, the purple waveform is the PFb output,and the yellow waveform is the TX output.Figure 7. NCN5150 Shutdown SequenceUART Interface IDC1The interface between the transceiver and an external microcontroller is a standard uart interface consisting of the TX and RX. Alternatively, inverted signals, TXI and RXI,which are active high, are also available. Only one signal from TX and TXI, or from RX and RXI can be used at the same time. The uart pins can handle communication up to 38400 baud. The M-BUS standard requires communication with 1 start bit, 8 data-bits, 1 even parity bit and 1 stop bit.Also available on the same connector is the VIO connection, PFb indication and 3V3 VDD output.Table 5. MICROCONTROLLER INTERFACEPin numberSignal Type Description 1PFb Output Bus failure indication 2VIO Power IO voltage level 3RX Input UART input5RXI Input UART input, inverted 7TX Output UART output9TXI Output UART output, Inverted 4, 6, 8GNDPower Ground 10VDDPower3V3 OutputTransmitterThe M-Bus transmitter translated the RX or RXI voltage levels to current levels on the bus. Typically, 15 mA is added when transmitting a space.Figure 8. Output WaveformsI BUSV RXV RXIReceiverThe receiver will compare the bus voltage level with the mark level stored on the SC capacitor minus the threshold level (typically 6 V). It will translate these voltage levels to low voltage communication on the TX and TXI pins. The high voltage of these pins is determined by the VIO voltage.Figure 9. Receive WaveformsV BUSV TXV TXIAPPENDIX Evaluation Board LayoutFigure 10. Top Layer Layout (SOIC)Figure 11. Bottom Layer Layout (SOIC)Figure 12. Top Layer Layout (QFN)Figure 13. Bottom Layer Layout (QFN)10ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed at /site/pdf/Patent−Marking.pdf. SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.PUBLICATION ORDERING INFORMATIONMouser ElectronicsAuthorized DistributorClick to View Pricing, Inventory, Delivery & Lifecycle Information:O N Semiconductor:NCN5150SOICGEVBNCN5150SOICGEVB。
IC-5150W快速安装指南.pdf_1705321964.3788207说明书
IC-5150W包裝內容網路線IC-5150W壁架組安裝指南CD 光碟片電源變壓器螺絲與壁虎LED 指示燈號說明硬體安裝請您按照本章節的說明，使用Wi-Fi 無線網路連線，安裝並啟動EdiLife 手機App 來設定您的IC-5150W ，您也可以使用電腦，以有線網路連接的方式來設定（詳情請參閱CD 內附使用手冊）。
您可以在本產品底座標籤貼紙上找到產品獨有的 SSID ，它會是如此標示"EdiView.Setup ** " ，而最後兩碼* * 即為您的網路攝影機獨有的 MAC 位址的最後兩碼。
至產品本體底部的電源連接埠，並將插頭端插入電源插座。
2.請稍待本產品開機完成。
當產品本體的電源LED燈號呈現綠燈慢速閃爍的狀態，代表已開機完成。
3.請使用您的手機或平板，依您其作業系統至Google Play或Apple AppStore搜尋〝EdiLife〞App，然後下載並安裝。
4.iOS用戶請在啟動EdiLife之前，先前往您iPhone的Wi-Fi設定，並連接到您網路攝影機的SSID(EdiView.Setup **)，接著請前往步驟75.Android用戶請啟動EdiLife後，點擊視窗畫面右上方的+圖示(如下右圖示)6.Android用戶請自可用的無線裝置清單中選擇您的無線網路攝影機後，耐心稍待App建立連線。
若您未看到您想要連線的無線網路，請點擊右上角的”重新整理”圖示.7.當您看到如下提示對話框，為了安全考量，請輸入新的裝置名稱和密碼。
接著，請點選Done(確認)以繼續。
8.請從清單中選擇您的Wi-Fi無線網路，然後輸入您的無線網路密碼後，再按OK "確定"。
若您未看到您想要連線的無線網路，請點擊右上角的”重新整理”圖示.9.請稍候您的IC-5150W連接到您的無線網路。
當你看到"Setup complete(安裝完成)"畫面時，請按下"Live"圖示以繼續，或等待數秒自動繼續。
ICETEK-TVP5150-EM使用说明书v1
ICETEK-TVP5150-EM板使用说明ICETEK-DM642-PCI板是一个集视频输入输出、音频编解码、网络传输、PCI接口等功能于一身的嵌入式应用开发平台，可用于软、硬件的评估。
为了在此平台上评估更多的硬件与DM642的连接应用，板上留出了3个扩展插座，即DCP1-3(这些扩展插座的定义，请参考ICETEK-DM642-PCI板附带的说明文档“TMS320DM642评估板背板规范.pdf”)，它们提供了EMIF、Vport口的接口以及电源和地等信号。
一.背板设计设计目的：由于ICETEK-DM642-PCI板上视频输入部分的组成为：视频解码芯片SAA7115(A,B)->DM642Vport(0,1)，其中的视频解码芯片可供两路活动视频信号同时输入，还支持Y/C分离信号的输入。
如果在实际应用中，我们不满足此输入配置，而需要单路输入或更多路的输入，或者需要采用其他的视频解码芯片取代SAA7115，比如构造数字信号的输入模块以连接数字摄像输入设备，就可以通过设计一个插在DCP1-3上的扩展背板来实现硬件和软件的评估。
ICETEK-TVP5150-EM背板就是一个直接接到DM642的Vport0上的视频解码芯片，构成TVP5150->DM642 Vport0的视频输入通路。
通过软件设置，DM642采用此此背板上的复合视频插座输入，从而绕开了ICETEK-DM642-PCI板上提供的视频输入通路。
TI TVP5150A芯片简介：TVP5150是一款视频解码芯片，它有1个9bit的AD转换器，可进行N 制和PAL制复合视频信号及Y/C信号的解码和输出，可产生8bit4:2:2格式或ITU-R BT656格式的输出，由一个标准的I2C总线接口进行控制。
具体的控制和输出方法请参见TVP5150A芯片的数据手册。
设计思路：电源：背板的供电采用3.3V，考虑功耗因素，背板可以由ICETEK-DM642-PCI板驱动，所以从ICETEK-DM642-PCI板上的DC_P1接口直接取电。
sangfor ngaf m5150-f-i datasheet说明书
Performance & Capacity NGAF M5150-F-I DimensionIPSec VPN Throughput Max IPSec VPN Tunnels Concurrent Connections (TCP)New Connections (TCP)Dual Power Supply1U 250Mbps 3001,000,00025,000N/AHardware Specifications RAMStorage HD Capacity Power [Watt] Max Operating T emperature Humidity System Weight System DimensionsNGAF M5150-F-I 4GB64G SSD (Customizable up to 2TB)40W 0°C~40°C5%~95% non-condensing 3.85 Kg300x430x45 mm (W x L x H)Network Interfaces Bypass (Copper)10/100/1000 Base-T SFP10G Fiber SFPOptional Interface & 10G Fiber SFP*Serial Port USB PortNGAF M5150-F-I 1 pair 6N/A N/A N/A 1 x RJ452End-to-End Protection - End-to-end protection from endpoint to business system- T otal visibility of the entire organization security status- Provides High Availability features with Multi-line HA and Load Balancing- Proactive early detection and prevention at thegateway to prevent attacks from reaching the network Double Security (2nd-Tier Firewall)- Double protection which complement existing firewall security policies to ensure full protection - Providing regulatory compliance- Simplified deployment, reducing downtime - Provides flexibility of security design and security policies for di erent business requirementsDMZ Protection- Dedicated business system protection for advance protection, without impacting other networks - Providing regulatory compliance- Simplified deployment, reducing downtime- Minimize operation and maintenance works to monitor and troubleshoot security incidentsInternet O ce Network SANGFOR NGAFServer Zone O ce Network Server Zone Internet Internet SANGFOR NGAF1st-Tier Firewall1st-Tier FirewallComplianceCompliance & CertificatesNGAF M5150-F-I CE, FCCDeployment ModesSANGFOR NGAFM5150-F-ISangfor Next Generation Application Firewall is the world first fully integrated NGFW + WAF with pre-event, during-event and post-event defense for all business assets.A truly integrated firewall solution, providing holistic overview of the entire organization security network, with ease of management for administration, operation and maintenance.NGAF-5150-F-I is the ideal Converged Security solution for Small & Medium Enterprises. It is also ideal for Branch Deployment.2nd-Tier FirewallO ce Network Server ZoneInternetSANGFOR NGAF DMZ NetworkNGFW is measured with Firewall, Bandwidth Management , IPS, Application ControlThreat Prevention is measured with Firewall, Bandwidth Management IPS, Application Control, Anti Virus12Firewall Throughput IPS & WAF Throughput NGFW Throughput WAF Throughput 3.5Gbps Threat Protection Throughput 1.8Gbps 1.4Gbps 2.5Gbps 2.5Gbps 12All Pictures shown are for illustration purpose only. Actual Product may vary.Hardware Description1. Management Console2. USB ports3. Default Interface4. Line Interface5. Power outlet6. Switch7. Fan Trays8. LED IndicatorsAll Pictures shown are for illustration purpose only. Actual Product may vary.13824765Software FeaturesNetworkingInterface: Physical Interface, Sub Interface, VLAN Interface, Aggregated InterfaceRouting: Static, Policy-based, RIP, OSPF, BGPNetwork Functions: ARP, DNS, DHCP, SNMP, NAT, High Availability01Access ControlUser: Import / export from external server Authentication: SSO/LDAP/RADIUS Application: ACL and application rules URL Filter: Supported02VPNSANGFOR VPN, IPSEC VPN and SSL VPN supported SDWAN auto path selection03ManagementSNMP v1, v2c, v3SyslogReal-Time Vulnerability Scanner Central management04Key FeaturesFully converged security solution from endpoint to business systems, without the needs of manual integration & consolidation of each feature, as well as additional hardware, which results in lower operational and maintenance costs.Lower TCO Converged Security SolutionsComprehensive business systems protection with built-in Web Application Firewall and Vulnerability Scanners, which is critical for internal systems as well as "internet-facing" systems. Business systems protection is easily enabled via advanced license, without any integration or additional appliance required.Comprehensive Business Systems ProtectionA single simplified operation & maintenance with interactive GUI, which provides ease of configuration, maintenance, troubleshooting and reporting for IT managers, administrators and operations team.User Friendly12Integrated L2–L7 Security features:DoS/DDoS: Inbound, Outbound, Attack Protection Content Security IPS Anti-virusEngine Zero: AI based anti-malware, anti-virus APT WAFData Leakage Prevention Bandwidth Management Web ScannerReal-Time Vulnerability Scanner Security ReporterNeural-X: Cloud threat intelligence and analyticsWeb Application Firewall (WAF) Semantic EngineSupport OWASP Top 10 WAFrequirementsRecommended by NSSSecurity FeaturesConverged SecurityComprehensive WAF123NGAF_DS_P_NGAF515-Datasheet_20210315For more information on Sangfor' full range of support & services, please contact your local representative.NGAF M5150-F-I Ordering Guide* All bundles are o ered in 1, 2, 3 or 5 year incrementsESS-M515-1/2/3/5Y PM-M515-1/2/3/5Y ULT-M515-1/2/3/5YSKUSKUDescriptionM5150-F-I, Essential Bundle (FW, BM, URL filtering, Application Control, IPS, Email Security, Risk Assessment, Security Visibility, Basic Security Reporter)M5150-F-I, Premium Bundle Including Essential Subscription & Engine Zero & Neural-XM5150-F-I, Ultimate Bundle including Premium Subscription & Platform-X (NGAF & Endpoint Secure Management, Event Correlation & Response, Security Posture Reporting) &Incident Response (2 times per annum) & Complimentary 30 units of Endpoint Secure Protect Agents (Limited Time O er)“A La Carte” Subscription LicenseFNX-M515-1/2/3/5Y FEZ-M515-1/2/3/5Y WAFL-M515-1/2/3/5YDescriptionM5150-F-I, Neural-X License, Threat Intelligence & Analytics, Unknown Threat & Advanced Threat Defense, Value-Added Cloud Service M5150-F-I, Engine Zero License, AI powered Malware Detection, Anti-malware, Anti-virusM5150-F-I, Add Anti-Defacement Module, Web Application FW, Application Hiding, HTTP Anomalies Detection, Data Leak Protection, Web Scanner, Vulnerability Scanner,Advanced Security ReporterSKUHardware Support ServicesSTS-M515-1/2/3/5Y HRTF-M515-1/2/3/5Y HSDS-M515-1/2/3/5Y HNBD-M515-1/2/3/5Y H244G-M515-1/2/3/5YDescriptionM5150-F-I, NGAF Software Upgrade, 24*7 Technical Support Services M5150-F-I, NGAF,Return to Factory (5 Business days ship after receipt)M5150-F-I, NGAF, SDS Hardware Service M5150-F-I, NGAF, NBD Hardware Service M5150-F-I, 24x7x4 Delivery Hardware Service。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
solete REFERENCE
TRIMMING CIRCUITS
CLOCK
PHASE GENERATOR
t(s) - Ob 1.1
Pin description
uc Figure 2. Pin connection
Obsolete Prod +ΩY
+ ΩX
14 HP 13
PD
ST
16 1 GND
FILTVDD
VCONT
Res
Res
Vdd
(TOP VIEW) DIRECTION OF THE DETECTABLE ANGULAR RATES
LPR5150AL
Features
MEMS motion sensor: dual axis pitch and roll ±1500°/s analog gyroscope
Preliminary data
■ 2.7 V to 3.6 V single-supply operation
■ Wide operating temperature range
uct(s 5
Package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Obsolete Prod 6
Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
(see Section 5)
) - O Applications t(s ■ Gaming applications uc ■ Pointing devices, remote and game controllers rod ■ Motion control with user interface P ■ Industrial and robotics te Description ole The LPR5150AL is a low-power dual-axis s micromachined gyroscope capable of measuring Obangular rate along pitch and roll axes.
lete 3.4 High pass filter reset (HP) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
bso 4
Application hints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
This is preliminary information on a new product now in development or undergoing evaluation. Details are subject to change without notice.
1/12
2.2 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
2.3 Absolute maximum ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
O 4.1 Output response vs. rotation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
) - 4.2 Soldering information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
It provides excellent temperature stability and
manufacturing capability and strongest expertise
high resolution over an extended operating
in the world for production of sensor in plastic
A CMOS IC provides the measured angular rate to the external world through an analog output voltage, allowing high level of integration and production trimming to better match sensing element characteristics.
temperature range (-40 °C to &150AL has a full scale of ±1500 °/s and is capable of detecting rates with a -3 dB bandwidth up to 140 Hz. Table 1. Device summary
Order code
Temperature range (°C)
Package
Packing
LPR5150AL LPR5150ALTR
-40 to +85 -40 to +85
LGA-16 (5x5x1.5) LGA-16 (5x5x1.5)
Tray Tape and reel
July 2009
Doc ID 15814 Rev 2
12
/
Contents
Contents
LPR5150AL
1
Block diagram and pin description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
1.1 Pin description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
ct(s) 3
Terminology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
du 3.1 Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
2
Mechanical and electrical specifications . . . . . . . . . . . . . . . . . . . . . . . . 5
2.1 Mechanical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
2/12 /
Doc ID 15814 Rev 2
LPR5150AL
Block diagram and pin description
1
Block diagram and pin description
Figure 1. Block diagram
+Ω X
CHARGE AMPLIFIER + -
DEMODULATOR
SWITCHED CAPACITOR
LOW-PASS FILTER
Optional LP/HP
Filter
Not amplified filtered output X
Product(s) +Ω Y
X/Y DRIVING MASS
CHARGE AMPLIFIER + -
Feedback loop
LGA-16L (5x5x1.5mm)
The gyroscope is the combination of one actuator and one accelerometer integrated in a single micromachined structure.
It includes a sensing element composed by single driving mass, kept in continuous oscillating movement and able to react when an angular rate is applied based on the Coriolis principle.
ST’s gyroscope family leverages on robust and mature manufacturing process already used for the production of micromachined accelerometers.
ST is already in the field with several hundreds million sensors with excellent acceptance from the market in terms of quality, reliability and performance.