英文贸易合同范本
国际贸易合同范本英文7篇
国际贸易合同范本英文7篇篇1国际贸易合同范本（International Trade Contract Template）甲方（买方）：____________________地址：____________________________________联系方式：____________________________法定代表人（或授权代表）：_______________________乙方（卖方）：____________________地址：____________________________________联系方式：____________________________法定代表人（或授权代表）：_______________________鉴于甲、乙双方同意按照本合同条款进行国际贸易活动，特达成如下协议：一、货物与规格（Commodity and Specifications）甲方购买乙方提供的以下货物，具体货物名称、规格型号、数量、单价等详见附件清单。
（详细商品清单及描述）二、交货与验收（Delivery and Acceptance）乙方应按照合同约定的时间、地点和方式交付货物。
甲方在收到货物后，应按照合同约定进行验收，如发现货物存在质量问题或规格不符等情况，应及时通知乙方并提出索赔要求。
三、价格与支付（Price and Payment）1. 货物价格以合同附件中约定的价格为准。
除非双方另有约定，否则价格不得变更。
2. 甲方应按照合同约定的支付方式和期限支付货款。
乙方应在收到货款后按照约定的方式开具发票。
四、运输与保险（Transportation and Insurance）1. 乙方应按照甲方的要求选择运输方式，并负责安排货物的运输和保险事宜。
甲方应提供必要的协助和信息。
2. 货物的运输风险和保险费用由乙方承担，但双方另有约定的除外。
如因乙方的过失导致货物损失，乙方应承担相应责任。
英语版国际贸易合同5篇
英语版国际贸易合同5篇篇1International Trade ContractThis contract is made on [Date] between [Company Name 1, Country 1] and [Company Name 2, Country 2], hereinafter referred to as the “Seller” and the “Buyer” respectively.1. Contract Commodity and SpecificationThe Seller agrees to sell and the Buyer agrees to purchase the following commodity: [Describe the product in detail, including name, quantity, specifications, and other necessary information].2. Terms of DeliveryDelivery shall be made on or before [Date of Delivery] from the port of [Port of Origin] to the port of [Port of Destination]. Any delay shall be notified to the Buyer by the Seller in writing at least [Number of Days] days prior to the agreed date of delivery.3. Price and PaymentThe total price for the contracted commodity shall be [Total Price in Currency]. The Buyer shall make payment within [Payment Term] upon receipt of the invoice from the Seller.4. Quality and Inspection5. Insurance and Risk Transfer6. Delay and Force Majeure7. Warranty and Claims8. Contract Amendment and TerminationThis contract may be modified or terminated only by mutual consent in writing signed by both parties or in accordance with relevant laws and regulations applicable under either party’s country’s law.9. Disputes SettlementFailure to agree on such place, each party may request arbitration at its own country’s arbitration institution located in its capital city respectively.If any party fails to perform its contractual obligations, such failure may be considered as a breach of contract underapplicable laws and regulations, subject to compensation for losses incurred by non-breaching party.If such dispute cannot be settled through negotiation or arbitration, it may be submitted to court in accordance with applicable laws and regulations under either party’s country’s law.Both parties agree that this contract shall be governed by and interpreted in accordance with laws applicable under either party’s country’s law, except otherwise stipulated by applicable international trade agreements or conventions to which both parties are parties.The language of this contract is English and shall be deemed valid whether signed by parties orally or confirmed by any party’s representative or other documents with equivalent legal effect.Upon execution in duplicate originals; each party retains one original copy for record purposes only..篇2国际贸易合同（International Trade Contract）本合同由以下双方签订：买方（Buyer）：___________卖方（Seller）：___________鉴于买方和卖方同意按照本合同规定的条款进行国际贸易，双方特此达成如下协议：一、商品与数量（Commodity and Quantity）1. 卖方同意向买方提供以下商品：___________ （商品名称、规格、数量等详细信息）。
国际贸易合同范本英文(分享)6篇
国际贸易合同范本英文（分享）6篇篇1International Trade Contract TemplateThis International Trade Contract is made and entered into on [date], by and between:Seller: [Name of Seller]Address: [Seller's Address]City: [City], Country: [Country]Telephone: [Seller's Telephone Number]Email: [Seller's Email]Buyer: [Name of Buyer]Address: [Buyer's Address]City: [City], Country: [Country]Telephone: [Buyer's Telephone Number]Email: [Buyer's Email]Whereas Seller desires to sell and Buyer desires to purchase the following goods/services:Description of goods/services: [Description]Quantity: [Quantity]Price: [Price]Delivery Date: [Delivery Date]Payment Terms: [Payment Terms]Incoterm: [Incoterm]1. Terms of Sale:1.1 Seller agrees to sell and deliver the goods/services to Buyer in accordance with the description, quantity, price, delivery date, payment terms, and incoterm specified above.1.2 Buyer agrees to purchase and accept delivery of the goods/services from Seller in accordance with the terms specified above.2. Price and Payment:2.1 The total price of the goods/services shall be [Total Price] and shall be paid by Buyer to Seller in [Currency] upon delivery.2.2 Payment shall be made by [Payment Method] to the bank account designated by Seller.3. Delivery:3.1 Seller shall deliver the goods/services to Buyer on or before the delivery date specified above.3.2 Delivery shall be made to the address specified by Buyer or as otherwise agreed upon by the parties.4. Title and Risk:4.1 Title to the goods/services shall pass to Buyer upon delivery.4.2 Risk of loss or damage to the goods/services shall pass to Buyer upon delivery.5. Inspection and Acceptance:5.1 Buyer shall have [Number of Days] days from the date of delivery to inspect the goods/services and notify Seller in writing of any non-conformities.5.2 If Buyer fails to notify Seller within the specified time period, the goods/services shall be deemed accepted.6. Warranty:6.1 Seller warrants that the goods/services shall conform to the description provided and be free from defects in material and workmanship.6.2 Seller's liability under this warranty shall be limited to the repair, replacement, or refund of the purchase price of thenon-conforming goods/services.7. Force Majeure:7.1 Neither party shall be liable for any failure or delay in performance under this Contract due to events beyond its reasonable control, including but not limited to acts of God, strikes, and natural disasters.8. Governing Law and Dispute Resolution:8.1 This Contract shall be governed by the laws of [Country].8.2 Any disputes arising out of or in connection with this Contract shall be resolved through arbitration in [City] in accordance with the rules of [Arbitration Institution].In witness whereof, the parties hereto have executed this International Trade Contract as of the date first above written.Seller: [Signature]Buyer: [Signature]篇2International Trade Contract TemplateThis International Trade Contract Template is hereby entered into by and between [Seller Name], located at [Seller Address], and [Buyer Name], located at [Buyer Address], collectively referred to as the "Parties".1. Products and QuantitySeller agrees to sell, transfer, and deliver to Buyer, and Buyer agrees to purchase from Seller, the following products:- Product Name 1: Quantity- Product Name 2: Quantity2. PriceThe total price for the products shall be [Total Price], payable as follows:- Deposit: [Deposit Amount]- Balance: [Balance Amount]The payment shall be made in [Currency] through [Payment Method].3. DeliverySeller shall deliver the products to Buyer's premises located at [Delivery Address] on or before the agreed-upon delivery dateof [Delivery Date]. Buyer shall be responsible for all shipping costs.4. Quality AssuranceSeller shall ensure that the products delivered conform to the specifications as agreed upon by the Parties. Any defects or nonconformities shall be reported by Buyer within [Number] days of receipt of the products.5. InspectionBuyer shall have the right to inspect the products upon delivery. Any rejection or discrepancy shall be promptly communicated to Seller in writing.6. Force MajeureNeither Party shall be liable for any delay or failure in the performance of the contract due to causes beyond their reasonable control, including but not limited to acts of God, strikes, war, or governmental regulations.7. Governing LawThis contract shall be governed by and construed in accordance with the laws of [Jurisdiction]. Any disputes arisingout of or related to this contract shall be resolved through arbitration in [Arbitration Location].8. ConfidentialityThe Parties agree to keep all confidential information disclosed during the performance of this contract confidential and not disclose it to any third party without prior written consent.IN WITNESS WHEREOF, the Parties have executed this contract on the date first above written.________________________[Seller Name]________________________[Buyer Name]This International Trade Contract Template constitutes the entire agreement between the Parties and supersedes all prior agreements, negotiations, and understandings, whether written or oral. By signing below, the Parties acknowledge and agree to the terms and conditions set forth in this contract.(Signature)Date: _______________________Place: _______________________篇3International Trade Contract TemplateThis International Trade Contract (the “Contract”) is made and entered into on [date], between [Seller], a company incorporated in [country], with a registered address at [address], and [Buyer], a company incorporated in [country], with a registered address at [address].1. PartiesSeller: [Seller name]Buyer: [Buyer name]2. Product DescriptionThe Seller agrees to sell and deliver to the Buyer the following products:- Product name:- Quantity:- Quality:- Price:- Delivery date:- Payment terms:3. Delivery TermsThe Seller shall deliver the products to the Buyer at the following location:Delivery address:Delivery method:Delivery date:Risk of loss shall pass to the Buyer upon delivery of the products.4. Payment TermsThe Buyer shall pay the Seller the total sum of [amount] for the products in accordance with the following payment terms:- [Describe payment terms]5. Quality AssuranceThe Seller warrants that the products shall be of satisfactory quality, fit for their intended purpose, and shall conform to any specifications agreed upon by the parties.6. Inspection and AcceptanceThe Buyer shall have the right to inspect the products upon delivery. Any defects or non-conformities shall be notified to the Seller in writing within [number] days of delivery.7. Force MajeureNeither party shall be liable for any failure or delay in performance under this Contract due to circumstances beyond its control, including but not limited to acts of God, war, riot, civil disturbance, government action, or natural disaster.8. Governing LawThis Contract shall be governed by and construed in accordance with the laws of [country].9. Dispute ResolutionAny dispute arising out of or in connection with this Contract shall be resolved through negotiations between the parties. If the dispute cannot be resolved amicably, it shall be referred toarbitration in accordance with the rules of [arbitration institution].10. Entire AgreementThis Contract constitutes the entire agreement between the parties with respect to the subject matter hereof and supersedes all prior agreements and understandings, whether written or oral.IN WITNESS WHEREOF, the parties hereto have executed this Contract as of the date first above written.[Seller]By: [Authorized signatory]Title: [Title]Date:[Buyer]By: [Authorized signatory]Title: [Title]Date:This International Trade Contract is entered into and effective as of the date set forth above.***This is a template of an International Trade Contract, and is provided for informational purposes only. It is advisable to seek legal advice before using this Contract in a real transaction.***篇4International Trade Contract TemplateThis International Trade Contract (the “Contract”) is made and entered into on [Date] by and between [Name of Seller], a company organized and existing under the laws of [Country], with its principal place of business located at [Address], and [Name of Buyer], a company organized and existing under the laws of [Country], with its principal place of business located at [Address].Recitals1. The Seller is engaged in the business of [Description of Seller’s Business].2. The Buyer is engaged in the business of [Description of Buyer’s Business].3. The Seller desires to sell and deliver the Goods (as defined below) to the Buyer, and the Buyer desires to purchase andreceive the Goods from the Seller, subject to the terms and conditions set forth in this Contract.AgreementIn consideration of the mutual covenants contained herein and other good and valuable consideration, the sufficiency of which is hereby acknowledged, the parties hereby agree as follows:1. Sale and Purchase of Goods1.1. Subject to the terms and conditions of this Contract, the Seller agrees to sell and deliver to the Buyer, and the Buyer agrees to purchase and receive from the Seller, the goods (the “Goods”) as described in Exhibit A attached hereto.2. Purchase Price2.1. The purchase price for the Goods shall be [Amount] per [Unit], for a total purchase price of [Total Amount], payable in [Currency] upon delivery of the Goods to the Buyer.3. Delivery3.1. The Seller shall deliver the Goods to the Buyer at the address specified by the Buyer within [Number of Days] daysfrom the date of this Contract. The Buyer shall bear all costs and risks of transportation and delivery of the Goods.4. Inspection and Acceptance4.1. The Buyer shall inspect the Goods promptly upon delivery and shall notify the Seller in writing of anynon-conforming Goods or other defects within [Number of Days] days of delivery.4.2. The Buyer shall be deemed to have accepted the Goods and waived any claims for non-conforming Goods or other defects if the Buyer fails to notify the Seller within the specified time period.5. Representations and Warranties5.1. The Seller represents and warrants that:(a) the Goods are free from any liens or encumbrances;(b) the Goods conform to the specifications set forth in Exhibit A; and(c) the Seller has the right and authority to sell the Goods.6. Governing Law6.1. This Contract shall be governed by and construed in accordance with the laws of [Country], without regard to its conflict of laws principles.7. Entire Agreement7.1. This Contract constitutes the entire agreement between the parties with respect to the subject matter hereof and supersedes all prior agreements and understandings, whether written or oral.IN WITNESS WHEREOF, the parties hereto have caused this Contract to be executed as of the date first above written.Seller: [Name of Seller]By: [Signature]Name: [Name of Signatory]Title: [Title of Signatory]Buyer: [Name of Buyer]By: [Signature]Name: [Name of Signatory]Title: [Title of Signatory]篇5International Trade Contract TemplateThis International Trade Contract ("Contract") is made and entered into on [Date], by and between [Seller], a company organized and existing under the laws of [Country] with its principal place of business at [Address] ("Seller"), and [Buyer], a company organized and existing under the laws of [Country] with its principal place of business at [Address] ("Buyer").1. Sales and Purchase. Seller agrees to sell and Buyer agrees to purchase the goods described in Exhibit A hereto (the "Goods") in accordance with the terms and conditions of this Contract.2. Price and Payment. The purchase price for the Goods shall be [Amount] per unit, payable in [Currency]. Buyer shall pay Seller the total purchase price within [Number] days of receipt of the Goods.3. Delivery. Seller shall deliver the Goods to Buyer at [Address] in [City], [Country], on or before [Date]. In the event Seller is unable to deliver the Goods by such date, Buyer may cancel this Contract without any liability.4. Inspection and Acceptance. Buyer shall have the right to inspect the Goods within [Number] days of their delivery. IfBuyer determines that the Goods are defective or do not conform to the specifications set forth in Exhibit A, Buyer may return the Goods to Seller at Seller's expense or request a refund.5. Warranties. Seller warrants that the Goods shall be free from defects in materials and workmanship and shall conform to the specifications set forth in Exhibit A. Seller further warrants that it has good and marketable title to the Goods and has the right to sell the Goods to Buyer.6. Force Majeure. Neither party shall be liable for any failure or delay in performance under this Contract if such failure or delay is caused by acts of God, strikes, wars, or any other event beyond the control of the parties.7. Governing Law. This Contract shall be governed by and construed in accordance with the laws of [Country].IN WITNESS WHEREOF, the parties hereto have executed this International Trade Contract as of the date first above written.____________________________________________________________[Seller][Buyer]篇6International Trade Contract TemplateThis International Trade Contract ("Contract") is entered into on [Date], by and between:[Name of Seller], a company registered under the laws of [Country], having its registered office at [Address] ("Seller"), and[Name of Buyer], a company registered under the laws of [Country], having its registered office at [Address] ("Buyer").WHEREAS, Seller desires to sell the products listed in Exhibit A ("Products") to Buyer and Buyer desires to purchase the Products from Seller;NOW, THEREFORE, in consideration of the mutual covenants and agreements contained herein, the parties hereto agree as follows:1. Products: Seller agrees to sell and deliver the Products to Buyer as specified in Exhibit A attached hereto.2. Price: The price for the Products shall be as stated in Exhibit A. Payment shall be made by Buyer to Seller in [Currency] within [Number] days from the date of delivery.3. Delivery: Seller shall deliver the Products to Buyer's designated address as set forth in Exhibit A. Delivery shall be made on or before the date specified in Exhibit A.4. Warranty: Seller represents and warrants that the Products are free from defects in material and workmanship and conform to the specifications set forth in Exhibit A. Seller shall replace or refund the purchase price for any defective Products returned by Buyer.5. Intellectual Property: Seller represents and warrants that it has the right to sell the Products and that the sale and delivery of the Products will not infringe any third-party intellectual property rights.6. Governing Law: This Contract shall be governed by and construed in accordance with the laws of [Country].7. Dispute Resolution: Any dispute arising out of or in connection with this Contract shall be resolved through negotiation between the parties. If the dispute cannot be resolved through negotiation, the parties agree to submit the dispute to arbitration in accordance with the rules of [Arbitration Institution].IN WITNESS WHEREOF, the parties hereto have executed this Contract as of the date first above written.Seller:Name: [Name]Title: [Title]Date:Buyer:Name: [Name]Title: [Title]Date:Exhibit AProducts: [Product Description]Price: [Price Per Unit]Delivery Date: [Date]Delivery Address: [Address]。
国际贸易合同范本中英文3篇
国际贸易合同范本中英文3篇篇一国际贸易合同范本中英文合同编号：日期：卖方：地址：电话：电子：买方：地址：电话：电子：买卖双方经协商同意按下列条款成交：1. 货物名称、规格和质量：[具体描述货物的名称、规格和质量]2. 数量：[具体数量]3. 单价：[具体价格]4. 总值：[总价]5. 交货条件：[如 FOB、CIF 等]6. 原产地国别：[货物的原产国]7. 包装及标准：[描述货物的包装方式和标准]8. 唛头：[运输标志]9. 装运期：[预计装运日期]10. 装运口岸和目的地：[装运港和目的港]11. 保险：[由哪方负责购买保险，保险类型和金额]12. 付款条件：[付款方式和时间]13. 单据：[卖方需要提供的单据，如发票、提单等]14. 检验：[检验标准和方式]15. 索赔：[索赔的条件和程序]16. 不可抗力：[不可抗力的定义和处理方式]17. 仲裁：[仲裁的地点和机构]18. 法律适用：[合同适用的法律]19. 其他条款：[其他双方约定的条款]卖方（盖章）：____________________代表（签字）：____________________日期：____________________买方（盖章）：____________________代表（签字）：____________________日期：____________________篇二国际贸易合同范本中英文合同编号：日期：卖方：地址：电话：电子：买方：地址：电话：电子：买卖双方经协商同意按下列条款成交：1. 货物名称、规格和质量：[具体描述货物的名称、规格和质量标准]2. 数量：[具体数量]3. 单价：[具体价格]4. 总值：[总价]5. 交货条件：[说明交货的地点、时间和方式]6. 原产地国别：[货物的原产国家或地区]7. 包装及标准：[描述货物的包装方式和标准]8. 唛头：[规定货物的唛头标记]9. 付款方式：[说明付款的方式和时间]10. 运输方式及费用负担：[指定运输方式，并说明运费的承担方]11. 保险：[说明是否购买保险以及保险的类型和金额]12. 检验：[规定货物的检验方式和标准]13. 索赔：[说明在货物出现问题时的索赔程序和要求]14. 不可抗力：[约定不可抗力事件的处理方式]15. 争议解决：[指定解决争议的方式，如仲裁或诉讼]16. 法律适用：[确定适用的法律]17. 本合同于[合同签订日期]由双方代表签字后生效，一式两份，买卖双方各执一份。
对外贸易合同范本中英文对照5篇
对外贸易合同范本中英文对照5篇第1篇示例：International Trade Contract对外贸易合同Party A: The Exporter (hereinafter referred to as “Party A”)甲方：出口商（以下简称“甲方”）This Contract is made on (date), in (place), between Party A and Party B, for the sale and purchase of the goods as described below.本合同由甲方和乙方于（日期）、（地点）签署，针对以下所述商品的销售和购买事宜。
Article 1 - Description of Goods第一条- 商品描述甲方同意出售，乙方同意购买以下商品：商品名称：（描述）2. Quantity: (Number of units)数量：（单位数量）3. Unit Price: (Price per unit)单价：（每单位价格）总价：（总金额）第二条- 交货条件商品应当通过（交货方式）送达至乙方指定的地址，在约定日期完成交货。
甲方应承担所有运输费用和风险，直至商品交付给乙方为止。
乙方有权在交付时对商品进行检验，并应立即通知甲方任何缺陷或不符合要求之处。
如商品被发现有缺陷或不符合要求，甲方应免费为乙方更换商品。
Article 4 - Payment Terms乙方应在收到商品后（数字）天内以（货币）支付给甲方总额为（总价）的金额。
任何逾期支付应按照每月（利率）的利率计算利息。
第五条- 不可抗力在不可抗力的情况下，任何一方均不应对未能履行本合同承担责任，包括但不限于天灾、战争、恐怖主义和自然灾害。
第六条- 争议解决任何由本合同引起的争议应通过甲乙双方友好协商解决。
如果双方无法达成一致，争议应根据（仲裁机构）规定，由仲裁在（地点）解决。
本合同构成甲方和乙方之间的全部协议，并取代所有先前的协议、了解和磋商。
中英文外贸销售合同范本3篇
中英文外贸销售合同范本3篇篇1Export Sales ContractThis Export Sales Contract is entered into on [Date] between [Exporter Company], a company registered in [Country] with registered address at [Address] (hereinafter referred to as the "Exporter"), and [Importer Company], a company registered in [Country] with registered address at [Address] (hereinafter referred to as the "Importer").1. Product Description: The Exporter agrees to sell and the Importer agrees to purchase the following products:- Product Name: [Product Name]- Description: [Description]- Quantity: [Quantity]- Price: [Price]- Delivery Date: [Delivery Date]- Payment Terms: [Payment Terms]2. Delivery Terms: The Exporter shall deliver the products to the Importer at the designated location [Address] on the agreed delivery date. The Importer shall be responsible for any additional costs associated with the delivery of the products.3. Payment Terms: The Importer shall make payment to the Exporter in the following manner:- Payment Method: [Payment Method]- Payment Currency: [Currency]- Payment Schedule: [Schedule]- Payment Amount: [Amount]4. Inspection and Acceptance: The Importer shall have the right to inspect the products upon delivery and shall notify the Exporter of any defects or discrepancies within [Number] days of delivery. The Exporter shall remedy any defects or discrepancies within a reasonable time frame.5. Non-Disclosure: Both parties agree to keep confidential any information disclosed as a result of this agreement, including but not limited to pricing, product specifications, and business operations.6. Governing Law: This agreement shall be governed by and construed in accordance with the laws of [Country]. Any disputes arising from this agreement shall be settled through arbitration in [City, Country].7. Termination: Either party may terminate this agreement with written notice to the other party in the event of a breach of contract, failure to make payment, or insolvency.This Export Sales Contract constitutes the entire agreement between the Exporter and Importer. Any modifications to this agreement must be made in writing and signed by both parties.In witness whereof, the parties hereto have executed this Export Sales Contract as of the date first above written.Exporter Company:__________________________[Signature]Importer Company:__________________________[Signature]篇2International Sales ContractThis International Sales Contract (the "Contract") is made and entered into as of [Date], by and between [Seller], a company organized and existing under the laws of [Country], with its principal place of business located at [Address] (hereinafter referred to as the "Seller"), and [Buyer], a company organized and existing under laws of [Country], with its principal place of business located at [Address] (hereinafter referred to as the "Buyer").1. Subject of the Contract:The Seller agrees to sell and deliver the goods specified in Exhibit A attached hereto to the Buyer, and the Buyer agrees to purchase and accept the goods, under the terms and conditions set forth herein.2. Quantity and Description of Goods:The goods to be sold shall be as described in Exhibit A, including quantity, quality, and specifications.3. Price and Payment:The price of the goods shall be [Price] per unit, as specified in Exhibit A. Payment shall be made by [Payment Terms], as specified in Exhibit B. Payment shall be made in [Currency]. Anytaxes or other charges applicable to the sale of the goods shall be the responsibility of the Buyer.4. Delivery:The Seller shall deliver the goods to the Buyer at the location specified in Exhibit A. The delivery date shall be as specified in Exhibit A. The Seller shall be responsible for the cost of packaging, handling, and transportation of the goods to the Buyer.5. Inspection and Acceptance:The Buyer shall have the right to inspect the goods upon delivery. If the goods do not conform to the specifications set forth in Exhibit A, the Buyer shall notify the Seller in writing within [Number] days of delivery. The Seller shall replace any non-conforming goods at its own expense.6. Force Majeure:Neither party shall be liable for any delay or failure to perform its obligations under this Contract if such delay or failure is due to a force majeure event, including but not limited to acts of nature, war, terrorism, or government actions.7. Governing Law:This Contract shall be governed by and construed in accordance with the laws of [Country]. Any disputes arising out of this Contract shall be resolved through arbitration in [City], in accordance with the rules of the International Chamber of Commerce.IN WITNESS WHEREOF, the Parties hereto have caused this Contract to be executed by their duly authorized representatives as of the date first above written.[Signature of Seller] [Signature of Buyer][Name and Title of Seller] [Name and Title of Buyer]篇3International Sales ContractThis International Sales Contract (the "Contract") is entered into on this [Date] by and between [Seller Name], a company organized and existing under the laws of [Country], with its principal place of business at [Address] (the "Seller"), and [Buyer Name], a company organized and existing under the laws of [Country], with its principal place of business at [Address] (the "Buyer").1. Subject of the Contract1.1 The Seller agrees to sell, transfer, and deliver to the Buyer the products as described in Exhibit A attached hereto (the "Products").1.2 The Buyer agrees to purchase and accept delivery of the Products specified in Exhibit A according to the terms and conditions set forth in this Contract.2. Price and Payment Terms2.1 The total purchase price for the Products shall be [Amount], payable by the Buyer to the Seller in the following manner: [Payment Terms].2.2 Payment shall be made in [Currency] and by [Payment Method] within [Number] days from the date of delivery.2.3 In case of late payment, the Buyer shall pay an interest rate of [Interest Rate]% per month until the outstanding amount is fully paid.3. Delivery3.1 The Seller shall deliver the Products to the Buyer's address as specified in Exhibit A within [Number] days from the date of this Contract.3.2 The Buyer shall be responsible for any costs related to customs duties, taxes, and transportation of the Products to their final destination.4. Inspection and Acceptance4.1 Upon delivery, the Buyer shall inspect the Products for any damage, defects, or non-conformity.4.2 The Buyer shall notify the Seller in writing of anynon-conformity within [Number] days from the date of delivery.4.3 If the Products are found to be non-conforming, the Seller shall replace the defective Products at no additional cost to the Buyer.5. Guarantee and Warranty5.1 The Seller guarantees that the Products shall be free from defects in material and workmanship for a period of [Number] days from the date of delivery.5.2 If any defect is discovered during the warranty period, the Seller shall repair or replace the defective Products at no additional cost to the Buyer.6. Governing Law and Disputes6.1 This Contract shall be governed by and construed in accordance with the laws of [Country].6.2 Any disputes arising out of or relating to this Contract shall be settled through amicable negotiations between the parties.6.3 If the parties fail to resolve the dispute amicably, it shall be settled by arbitration in [City], [Country] in accordance with the rules of [Arbitration Commission].IN WITNESS WHEREOF, the parties hereto have duly executed this Contract as of the date first above written.SELLER: [Seller Name]BUYER: [Buyer Name]Exhibit A: List of Products[Product Description, Quantity, Price]。
国际贸易合同范本英文5篇
国际贸易合同范本英文5篇篇1International Trade Contract TemplateThis International Trade Contract ("Contract") is entered into between the following parties:Seller: [Name of Seller]Address: [Address of Seller]Contact: [Contact Information of Seller]Buyer: [Name of Buyer]Address: [Address of Buyer]Contact: [Contact Information of Buyer]1. Product DescriptionThe Seller agrees to sell and the Buyer agrees to purchase the following product(s) in accordance with the terms and conditions of this Contract:Description: [Description of the Product]Quantity: [Quantity of the Product]Quality: [Quality Standards of the Product]Price: [Price per Unit of the Product]Currency: [Currency in which the Price is expressed]2. Delivery TermsThe Seller shall deliver the product(s) to the Buyer at the following location:Delivery Address: [Delivery Address]The delivery shall be made on or before the following date: [Delivery Date]The Seller shall be responsible for arranging the transportation of the product(s) to the specified location.3. Payment TermsThe Buyer shall make the payment for the product(s) in the following manner:Payment Method: [Method of Payment]Payment Schedule: [Payment Schedule]The Seller shall provide the Buyer with an invoice for the product(s) upon delivery.4. Inspection and AcceptanceThe Buyer shall have the right to inspect the product(s) upon delivery and shall have [Number of Days] days to accept or reject the product(s) based on the quality standards agreed upon in this Contract.If the Buyer finds the product(s) to be non-conforming to the quality standards, the Buyer shall have the right to reject the product(s) and request a replacement or refund.5. WarrantyThe Seller warrants that the product(s) are free from defects in materials and workmanship and comply with all applicable laws and regulations. The Seller agrees to replace or refund any defective product(s) within a reasonable time frame.6. Governing LawThis Contract shall be governed by and construed in accordance with the laws of [Jurisdiction].7. Dispute ResolutionAny disputes arising out of or in connection with this Contract shall be resolved through arbitration in accordance with the rules of [Arbitration Body].8. ConfidentialityBoth parties agree to keep all information exchanged during the course of this Contract confidential and not to disclose it to any third party without the other party's consent.9. Entire AgreementThis Contract constitutes the entire agreement between the parties with respect to the subject matter hereof and supersedes all prior agreements, arrangements, and understandings.IN WITNESS WHEREOF, the parties hereto have executed this Contract as of the Effective Date first above written.Seller: _______________________Buyer: _______________________Date: ________________________篇2International Trade Contract TemplateThis International Trade Contract is made effective as of [Date], between [Seller], located at [Seller's Address] and [Buyer], located at [Buyer's Address.1. Product Description:The Seller agrees to sell and deliver the following products: [Description of the Products], to the Buyer in accordance with the terms and conditions of this contract.2. Quantity:The Seller agrees to deliver a quantity of [Quantity] of the products as mentioned in the Product Description section.3. Price:The total price for the products to be delivered under this contract is [Total Price], payable in [Currency]. The payment terms shall be [Payment Terms].4. Delivery:The Seller agrees to deliver the products to the Buyer at [Delivery Location] on or before the delivery date specified in this contract. The Buyer shall bear all costs related to the delivery of the products.5. Inspection:The Buyer shall have the right to inspect the products upon delivery and shall notify the Seller of any defects or discrepancies within [Number of Days] days of delivery.6. Acceptance:The Buyer shall be deemed to have accepted the products if no notice of rejection is given within the specified time frame. Any defects or discrepancies noticed by the Buyer shall be remedied by the Seller at no additional cost to the Buyer.7. Warranties:The Seller warrants that the products delivered under this contract are of good quality, free from defects, and conform to the specifications set forth in this contract.8. Governing Law:This contract shall be governed by and construed in accordance with the laws of [Jurisdiction]. Any disputes arising out of or related to this contract shall be resolved through arbitration in accordance with the rules [Arbitration Rules].9. Entire Agreement:This contract constitutes the entire agreement between the parties and supersedes any prior agreements or understandings, whether written or oral, relating to the subject matter herein.IN WITNESS WHEREOF, the parties hereto have executed this International Trade Contract as of the date first above written.[Seller's Signature] [Buyer's Signature][Seller's Name] [Buyer's Name]This International Trade Contract Template is provided for reference purposes only and may need to be customized to suit the specific requirements of the parties involved in the transaction. It is advisable to seek legal advice before entering into any international trade contracts.篇3International Trade Contract SampleThis International Trade Contract ("Contract") is entered into on [date], by and between [Seller], a company organized and existing under the laws of [country], with its principal place of business at [address] ("Seller"), and [Buyer], a company organized and existing under the laws of [country], with its principal place of business at [address] ("Buyer").WHEREAS, Seller is engaged in the business of manufacturing and selling [products/services], and Buyer desires to purchase [products/services] from Seller for resale in [country];NOW, THEREFORE, in consideration of the mutual covenants and promises contained herein, Seller and Buyer hereby agree as follows:1. Product/Service DescriptionSeller agrees to sell to Buyer and Buyer agrees to purchase from Seller [describe the products/services], in the quantities and at the prices set forth in Exhibit A, attached hereto and incorporated herein by reference.2. Delivery TermsSeller shall deliver the products/services to Buyer at the location specified in Exhibit A in accordance with the delivery schedule set forth therein. Any delay in delivery shall entitle Buyer to liquidated damages as set forth in Exhibit A.3. Price and Payment TermsThe price for the products/services shall be as set forth in Exhibit A. Buyer shall make payment to Seller in [currency] within [number] days of receipt of the invoice.4. Quality AssuranceSeller warrants that the products/services shall conform to the specifications set forth in Exhibit A and shall be ofmerchantable quality. In the event of any non-conformity, Buyer may reject the products/services and seek remedies as set forth in Exhibit A.5. Inspection and AcceptanceBuyer shall have the right to inspect the products/services upon delivery. Buyer shall notify Seller of any non-conformities within [number] days of receipt. Failure to notify Seller within the specified time frame shall constitute acceptance of the products/services.6. Intellectual Property RightsSeller represents and warrants that it has the right to sell the products/services and that the sale of the products/services does not infringe upon any third-party intellectual property rights.7. Limitation of LiabilityIn no event shall either party be liable to the other for any consequential, incidental, special, or punitive damages arising out of or related to this Contract, even if the party has been advised of the possibility of such damages.8. Governing LawThis Contract shall be governed by and construed in accordance with the laws of [country], without regard to its conflicts of law principles.9. Dispute ResolutionAny dispute arising out of or relating to this Contract shall be resolved through arbitration in [city], [country], in accordance with the rules of [arbitration organization]. The decision of the arbitrator shall be final and binding on the parties.IN WITNESS WHEREOF, the parties hereto have executed this Contract as of the date first above written.[Signature of Seller] [Signature of Buyer][Printed Name and Title of Seller] [Printed Name and Title of Buyer]Exhibit A: Price List and Delivery ScheduleThis Contract constitutes the entire agreement between the parties with respect to the subject matter hereof and supersedes all prior or contemporaneous agreements and understandings, whether written or oral. This Contract may not be modified except in writing signed by both parties.篇4International Trade Contract TemplateThis International Trade Contract Template (the "Contract") is entered into as of [Date], by and between [Company A], a [Country A] corporation having its principal place of business at [Address A] ("Seller"), and [Company B], a [Country B] corporation having its principal place of business at [Address B] ("Buyer"). Seller and Buyer may be collectively referred to as the "Parties."1. Product DescriptionSeller agrees to sell and deliver to Buyer the following products (the "Products"): [Description of Products]. The Products shall be delivered in accordance with the specifications set forth in Exhibit A attached hereto and incorporated herein by reference.2. Price and PaymentThe price of the Products shall be [Price] per unit. Buyer shall pay Seller the total price for the Products in the amount of [Total Price], which shall be paid upon delivery of the Products. Payment shall be made in [Currency] to the bank account specified by Seller.3. DeliverySeller shall deliver the Products to Buyer within [Delivery Timeframe] days of the Effective Date. Delivery shall be made to [Delivery Location]. Buyer shall be responsible for all costs associated with the transportation and delivery of the Products to the Delivery Location.4. InspectionBuyer shall have the right to inspect the Products upon delivery. Buyer must notify Seller in writing of any defects or nonconformities in the Products within [Inspection Period] days of delivery. Failure to provide written notice within the Inspection Period shall constitute acceptance of the Products.5. Quality AssuranceSeller represents and warrants that the Products shall be of good quality and free from defects in material and workmanship. Seller shall replace any defective Products at no additional cost to Buyer.6. Title and Risk of LossTitle to and risk of loss of the Products shall pass to Buyer upon delivery. Buyer shall bear all risk of loss or damage to the Products after delivery.7. Intellectual Property RightsSeller retains all rights, title, and interest in and to any intellectual property associated with the Products. Buyer shall not use Seller's intellectual property without Seller's prior written consent.8. ConfidentialityThe Parties agree to keep all information related to this Contract confidential and not disclose it to any third parties without the other Party's consent.9. Governing LawThis Contract shall be governed by and construed in accordance with the laws of [Country A]. Any disputes arising out of or in connection with this Contract shall be resolved through arbitration in [City, Country A] in accordance with the rules of the [Arbitration Association].10. Entire AgreementThis Contract constitutes the entire agreement between the Parties with respect to the sale and purchase of the Products and supersedes all prior agreements and understandings, whether written or oral.IN WITNESS WHEREOF, the Parties hereto have executed this Contract as of the Effective Date.[Company A]By: ___________________Name: _________________Title: ___________________[Company B]By: ___________________Name: _________________Title: ___________________EXHIBIT ASpecifications of the Products:[Description of Specifications]篇5International Trade Contract TemplateThis International Trade Contract (the "Contract") is entered into as of [date] by and between [Seller Name], a company organized and existing under the laws of [country], with its principal place of business at [address] (the "Seller"), and [Buyer Name], a company organized and existing under the laws of[country], with its principal place of business at [address] (the "Buyer").1. Product DescriptionSeller agrees to sell and deliver to Buyer, and Buyer agrees to purchase from Seller, the following products:- Product Name- Quantity- Specifications2. Price and Payment TermsThe total price for the products shall be [amount] USD. The payment shall be made in [currency] within [number] days of the delivery date. Payment shall be made by [payment method].3. Delivery TermsThe products shall be delivered by Seller to Buyer at [delivery location]. Delivery shall be made on [delivery date]. The delivery terms shall be [Incoterms].4. Inspection and AcceptanceBuyer shall inspect the products promptly upon delivery. If Buyer finds the products to be non-conforming or defective,Buyer shall notify Seller within [number] days of delivery. Seller shall have the right to remedy any non-conformities or defects within a reasonable time.5. WarrantySeller warrants that the products shall conform to the specifications and be free from defects in material and workmanship. Seller's liability under this warranty shall be limited to repairing or replacing the non-conforming or defective products.6. Governing LawThis Contract shall be governed by and construed in accordance with the laws of [country]. Any dispute arising out of or relating to this Contract shall be submitted to the exclusive jurisdiction of the courts of [country].7. Force MajeureNeither party shall be liable for any failure or delay in the performance of its obligations under this Contract caused by events beyond its reasonable control, including but not limited to acts of God, war, terrorism, fire, flood, or government actions.8. Entire AgreementThis Contract constitutes the entire agreement between the parties with respect to the sale and purchase of the products and supersedes all prior agreements and understandings, whether written or oral, relating to the subject matter hereof.IN WITNESS WHEREOF, the parties have executed this Contract as of the date first above written.[Seller Name] [Buyer Name]By: [Authorized Signatory] By: [Authorized Signatory]Name: Name:Title: Title:。
最新标准中英文外贸合同范本6篇
最新标准中英文外贸合同范本6篇篇1合同编号：XXXXXX甲方：（以下简称“买方”）乙方：（以下简称“卖方”）根据《中华人民共和国合同法》及相关法律法规的规定，甲乙双方在平等、自愿、公平、诚实信用的原则基础上，就买卖双方在对外贸易过程中所涉及的相关事宜，经友好协商，达成如下协议：一、合同双方基本信息甲方（买方）：名称：_________________________注册地址：_________________________法定代表人：_________________________联系电话：_________________________电子邮箱：_________________________乙方（卖方）：名称：_________________________注册地址：_________________________法定代表人：_________________________联系电话：_________________________电子邮箱：_________________________二、合同货物信息本合同货物为XXX产品，规格型号、数量、单价、总价款等详见附件《货物清单》。
除另有约定外，货物的具体描述及质量要求等均以附件内容为准。
货物应按照相关国际标准和买方的技术要求进行生产和检验。
三、价格与付款方式1. 价格：货物的价格以附件《货物清单》中约定的价格为准。
除另有约定外，该价格包含了货物成本、包装、运输、保险等相关费用。
卖方承诺所提供的货物价格是市场公平价格。
2. 付款方式：货款的支付方式为付款交单方式（或电汇）。
具体的支付时间、支付方式等详见附件《支付条款》。
买方应按照约定支付货款，如买方未按时支付货款，应按照合同规定承担违约责任。
四、交货与验收1. 交货时间：卖方应按照合同约定的时间及时交货。
具体的交货日期详见附件《交货计划》。
如遇特殊情况需延迟交货，卖方应及时通知买方并与买方协商解决。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
英文贸易合同范本英文方面的贸易合同范本大家是怎么样写呢？你知道要注意什么吗？我们大家可以看看下面哦！英文贸易合同范本COMPENSATION TRADE CONTRACTContract No.： __________Date of Signing： _________Place of Signing： _______The two Parties：Party A： ________________________________Address： ________________________________Tel：_________________Fax： _______________E-mail： _________________________________Party B： ________________________________Address： _______________________________Tel：_________________Fax： ________________E-mail：_________________________________WITNESSETHWhereas Party B has machines and equipment, which are now used in Party B's manufacturing of _______, and is willing to sell to Party A the machines and equipment；andWhereas Party B agrees to buy the products, _______,made by Party A using the machines and equipment Party B supplies, in compensation for the price of the machines and equipment, andWhereas Party A agrees to purchase from Party B the machines and equipment, andWhereas Party A agrees to sell to Party B the products, _______, in compensation of the price of Party B's machines and equipment； Now therefore, in consideration of the premises and covenants described hereinafter, Party A and Party B agree a follows：ARTICLE 1 TRANSACTIONSA） Party B agrees to provide Party A with _________ machines to be used in production, their auxiliary machinery, accessories and spare parts and a variety of measuring and testing instruments required in the process of production. The details of the models, names, specifications,quantity, prices, packing, delivery , etc. thereof shall be specified in an additional equipment-import agreement to be concluded by and between both parties which shall serve as an component part hereof.B） The total value of the machines, auxiliaryequipment, etc. supplied by part B shall be paid off by Party A with part of the manufactures made therewith and/or other goods, or withproducts made in if both parties agree. The specific name, quantity, price, delivery, etc. of the goods granted as the make-up payment shall be decided in an additional compensation goods-supply agreement made by the parties which shall serve as a component part hereof. The equipment-import agreement and compensation-goods-supply agreement aforesaid may be merged as one called sales agreement on compensation trade.ARTICLE 2 PAYMENTBoth parties agree to open letters of credit in favor of each other, Party A will open, at regular intervals, long term letters of credit in favor of Party B to pay by installments the total cost of the machines and auxiliary equipment provided by Party B； whereas Party B will open sight letters of credit in favor of Party A to pay the products to be delivered by Party A. Party A shall pay for the total cost of the machines and auxiliary equipment with the money remitted by Party B as reimbursement for the products to bedelivered by Party A. In case the sum to be paid by Party B fails to cover the value of the long-term letters of credit opened by Party A, the difference shall be made up by Party B by paying that much to Party A in advance, before the long-term letters of credit are due, to enable Party A to reimburse on time the long-term letters of credit it opens. The payment of the long-term letters of credit opened by Party A is based on Party B's opening a sight letter of credit under the provisions and on its paying the advance required herein. Thus, Party B warrants, guarantees and covenants that it will open the letters of credit and pay the advance as provided herein.ARTICLE 3 REIMBURSEMENTParty A shall reimburse Party B for all the machines and auxiliary equipment supplied by Party B by delivering goods to Party B on a monthly basis and the reimbursement will last for___ year and ____months. The reimbursement shall start approximately ____month after the first delivery of the machines and, in principle, the money to be reimbursed per month shall be ______percent of the total amount due for themachines. With a ______month notice to Party B, Party A may reimburse Party B in advance.Within the reimbursement period, Party B shall, under the provisions of the additional sales agreement aforesaid, open, sight, irrevocable, divisible and assignable letters of credit, covering the full amount, in favor of Party A.ARTICLE 4 STANDARD MONEY AND PRICE STANDARDThe standard money for this transaction is . All the machinery, auxiliary equipment and measuring and testing instruments , etc. provided by Party B shall be valued with , while the goods provided by Party A to Party B as reimbursement shall be valued with the basis price of the same goods exported by Party A at the time when this agreement is entered into, and the total price shall be changed into that of in accordance with the exchange rate then.ARTICLE 5 INTRERESTParty A shall pay the interest on its long-term letters of credit and the interest on the cash in advance rendered by Party B. The annual interest rate is agreed upon at_____%.ARTICLE 6 TECHNICAL SERVICEThe machinery, after arrival at its destination, shall be installed by Party A, Party B shall dispatch its technicians to render spot instructions and other necessary technical assistance during the installation of the main machines, as may be requested by Party A in case of necessity, Party B shall be liable for the losses resulted in such a course of installation from technical default on its part.ARTICLE 7 ADDITIONAL EQUIPMENTDuring the enforcement of this agreement, if it is found necessary that, in addition to the machinery and equipment listed herein, some new accessories or measuring and testing instruments are needed for completion of the project, additional order may be made through negotiation by the parties. The new items thus added shall be incorporated in agreement.ARTICLE 8 INSURANCEThe machinery and auxiliary equipment, after shipment, shall be insured by Party B. The title thereof shall be transferred into Party B after full payment therefore is made by Party B, thereafter, theunforeseeable losses concerning the machinery and auxiliary equipment shall be indemnified for first by the Insurance Company to Party B, then Party B shall remit for Party A,in proportion, the sum already paid by Party A for the machinery or equipment involved in the contingency.ARTICLE 9 LIABILITY FOR BREACH OF AGREEMENTParty B shall , if it fails to comply with this agreement to make purchase of the goods delivered by Party A as reimbursement, or Party A shall, if it fails to comply with this agreement to deliver the goods it is due to provide, be deemed liable for a breach of agreement and shall compensate the non-breaching Party for the loss caused thereupon and shall pay the non-breaching Party a fine accounting for % of the total value of the goods in question.ARTICLE 10 PERFORMANCE GUARANTEETo guarantee the implementation of this agreement, each party shall submit to the other party a letter of guarantee issued by its bank respectively. The guaranteeing bank of Party A is ______ Bank, ______, while the guaranteeing bank of Party B is ______Bank,______.ARTICLE 11 AMENDMNETThe modification of this agreement in particular cases shall be agreed upon by both parties through negotiations.ARTICLE 12 Force MajeureIn case that one or both parties are impossible to perform the duties provided herein on account of force majeure, the party in contingency shall inform the other party of the case immediately and may, provided the case is duly verified by the competent authorities, delay in performance of or not perform the relevant duties hereunder the be partially or entirely exempted from the liability for breach of this agreement.ARTICLE 13 ARBITRATIONAny dispute arising from or in connection with this Contract shall be submitted to China International Economic and Trade Arbitration Commission,Shenzhen Commission for arbitration which shall be conducted in accordance with the Commission's arbitration rules in effect at the time of applying for arbitration. The arbitral award is final and binding upon both partiesand the applicable law is the material law of Notwithstanding any reference to arbitration, both Parties shall continue to perform their respective obligations under the Contract unless otherwise agreed.ARTICLE LANGUAGE AND EFFECTIVE DATEThere are two originals hereof made respectively in Chinese and ______, both of which are of the same effect.This agreement shall come into effect on the date when both parties set their hands hereunto and remain effective for_____ years. Upon its expiration, the parties may, if they choose, extend the term hereof for _____years or execute a new cooperation agreement, provided they apply to and approved by the Authority agencies concerned.Party A Party BRepresentative of___ Representative of_______。