LM200WD3-TLC9 LG20寸LED屏规格书
LG Display(LG)液晶面板连接器型号清单--精电连接
面板尺寸
42 31.5 55 47 15.6 15.6 15.6 47 47 37 60 23 42 31.5 42 31.5 55 55 55 23.8 23 55 31.5 20 15.4 84 65 23.8 23.8 15.4 14 42 15 19 49 49 47
信号接口型号
FI-RE51S-HF FI-RE51S-HF FI-RE51S-HF FI-RE51S-HF HD2S030HA1 KN38B-30S-0.5H 20455-040E-0# FI-RE51S-HF FI-RE51S-HF FI-R51S-HF FI-RE51S-HF IS100-L30O-C23 FI-R51S-HF TF06L-60S-0.5SH FI-RE51S-HF FI-RE51S-HF FI-RE51S-HF FI-RE51S-HF FI-RE51S-HF IS050-C51B-C39-A TF19L-50S-0.5SH F06L-50S-0.5SH TF06L-60S-0.5SH FI-XB30SL-HF10 20474-040E-12 FI-RE51S-HF FI-RE51S-HF IS100-L30O-C23 IS100-L30O-C23 MDF76LBRW-30S-1H 20455-040E-0x FI-R51S-HF DF14H-20P-1.25H IS100-L30O-C23 FI-RE51S-HF FI-RE51S-HF TF06L-50S-0.5SH
LG Display(LG) LG Display(LG) LG Display(LG) LG Display(LG) LG Display(LG) LG Display(LG) LG Display(LG) LG Display(LG) LG Display(LG) LG Display(LG) LG Display(LG) LG Display(LG) LG Display(LG) LG Display(LG) LG Display(LG) LG Display(LG) LG Display(LG) LG Display(LG) LG Display(LG) LG Display(LG) LG Display(LG) LG Display(LG) LG Display(LG) LG Display(LG) LG Display(LG) LG Display(LG) LG Display(LG) LG Display(LG) LG Display(LG) LG Display(LG) LG Display(LG) LG Display(LG) LG Display(LG) LG Display(LG) LG Display(LG) LG Display(LG) LG Display(LG) LG Display(LG) LG Display(LG) LG Display(LG) LG Display(LG) LG Display(LG)
南京蓝摩多媒体显示器说明
- 11 -
Fax: 025-85401082
- 10 -
Fax: 025-85401082
Landmore®
南京蓝摩科技有限公司
轿厢安装 图9.4
轿厢安装 图9.5
注: * 15"显示器为我公司标准配置,客户也可进行非标选定.有17"、12.1"、10.4"
等尺寸的屏供选择；
* LMVD的功能也可跟据客户需求做非标更改；
Tel：025-85401826 85436606
● 时间 日期 温度:时间日期自动显示，温度显示的是轿厢内部的温度。
● 网络新闻: 自动更新显示真实网络网站的新闻。通过直接连驳宽带网或局域网实现。
● 影音播放: 显示影音播放的画面和声音。编辑传输同“小区广播”，显示器最多一次
可存 10G 的影音文件。
6. 尺寸及面板详解:
6.1 信息屏面板详解图：
8.2.2 LMVD150ZNE 显示器：15"TFT 功 能：1.电梯运行状态显示
2.VCD格式影音文件播放 3.客户自制广告信息播放 4.客户自制图片播放
8.2.3 LMVD150YNE 显示器：15"TFT
功 能：1.时间日期显示
2.电梯运行状态显示
3.载重量LOGO标志或者小区新闻显示
4.电梯欢迎词显示
-6-
图 6.5.4（背面）
Fax: 025-85401082
Landmore®
6.5.3 10．4″外挂型
南京蓝摩科技有限公司
外形尺寸:426.0(宽)×252.0(高)×105.0(上厚)×70.0(下厚)mm
105.0
视域尺寸：215.0(宽) ×160.0(高)mm 426.0
西门子触摸屏资料
尺寸型号技术参数6AV6642-0BA01-1AX0TP177B 6AV6642-0BC01-1AX0TP177B6AV6542-0BB15-2AX0OP170B 蓝色256色代替TP170B 触摸屏 单色代替TP170Bmono 触摸屏 MPI/PROFIBUSDP 操作屏3寸OP73microSTN 液晶显示器（LCD ）,黑/白背 4.5寸OP77ASTN 液晶显示(LCD)黑 OP170B 蓝色MPI/PROFIBUSDP □触摸屏TP0705.7"蓝色128K 用户内存触摸屏 OP177B5.7寸用户内存2048K 蓝色触摸屏 OP2775.7寸用户内存4M 代替OP270触摸屏 TP177BDPSTN 液晶显示（LCD ）4种蓝色色 TP177BPNDP256色彩 OP177B5.7寸用户内存2048K TP277TFT 液晶显示256色代替TP270触摸屏 TP177A5.7寸用户内存512K0蓝色触摸屏 OP2706"256色2M 内存操作屏 TP170B6"蓝色512K 内存触摸屏TP170B6"彩色512K 内存触摸屏6AV6545-0CA10-0AX0TP2706"256色2M 内存触摸屏 MP2777.5寸用户内存6M 触摸MP2777.5寸用户内存6M 代替MP270TP27010"256色2M 内存触摸屏6AV6542-0CC10-0AX0OP27010"256色2M 内存操作屏12.16AV6644-0BA01-2AX0MP377TFT 液晶显示(LCD)64K6AV6644-0BA01-2AX0 MP37012"256色触摸屏MP37012"键控256色操作屏 MP377TFT 液晶显示(LCD)64KMP37015"256色触摸屏MP377TFT 液晶显示(LCD)64K 3寸6AV6640-0AA00-0AX0 4寸TD400C 文字显示器4行显示15按键6AV6545-0AG10-0AX0 10.46AV6643-0CD01-1AX1 6AV6643-0DD01-1AX1 6AV6542-0AG10-0XA0 MP270B10"触摸256色 MP27710.4寸用户内存 MP27710.4寸用户内存 MP270B10.4寸4M 6M 6M 内存触摸屏 触摸 代替MP270 6AV6640-0BA11-0AX0 6AV6574-1AF04-4AA0170墙式安装移动面板 6AV6641-0AA11-0AX0 3寸OP733"LCD 触摸屏 6AV6641-0BA11-0AX0 6AV6641-0CA01-0AX04.6寸 OP77BSTN 液晶显示（LCD ）黑白 6AV6574-2AC00-2AA0 CF 卡128M 存储卡6AV6545-0AA10-0XA0 TP070触摸屏6AV6542-0BB15-2AX0 5.76AV6545-0AA15-2AX06AV6642-0DC01-1AX06AV6643-0BA01-1AX06AV6642-0BC01-1AX06AV6642-0BA01-1AX06AV6642-0DA01-1AX06AV6643-0AA01-1AX06AV6642-0AA11-0AX066AV6542-0CA10-0AX06AV6545-0BB15-2AX06AV6545-0BC15-2AX0 6AV6545-0BA15-2AX0 TP170A6"蓝色256K 内存触摸屏6AV6640-0CA11-0AX05.7寸TP177MICRO 蓝色触摸屏 6AV6640-0DA11-0AX0 5.7寸K-TP178MICRO 触摸屏7.56AV6643-0CB01-1AX1 6AV6643-0DB01-1AX1 106AV6545-0CC10-0AX0 6AV6545-0DA10-0AX06AV6542-0DA10-0AX0 15.16AV6644-0AB01-2AX0 6AV6545-0DB10-0AX0196AV6644-0AC01-2AX0触摸屏HMI。
LG 液晶显示器型号说明.pdf_1702033596.4889665说明书
简体中文用户手册液晶显示器使用前请阅读使用说明。
保留备用。
液晶显示器型号列表34UM95-PD34UM95-PE34UM94-PD2目录3 重要预防措施3 安全警告3 - 请勿打开显示器：3 - 为避免人身伤害：3 - 为避免火灾或危险：4 关于安装5 关于清洁5 关于重新包装5 关于处置6 许可证7 组装和准备工作7 产品组件8 产品和按钮描述20 - HDMI 连接20 连接外部设备20 - USB电缆连接- PC21 - 耳机端口连接22 安装软件25 用户设置25 激活主菜单25 - 主菜单26 用户设置26 - 菜单设置27 - -比率28 - -功能29 - -PBP30 - -画面31 - -色彩32 - -设置33 - -初始化34 - -阅读3重要预防措施重要预防措施设计和制造本设备旨在确保您的个人安全，但使用不当可能造成潜在的触电或火灾危险。
为了使本显示器中包含的所有防护措施都能正确运行，请遵守以下有关其安装、使用和维修的基本规则。
安全警告仅使用随本设备提供的电源线。
如果您使用其他电源线，且如果不是由供应商提供，请确保其经过适用国家标准的认证。
如果电源线在任何情况下发生故障，请联系制造商或最近的授权维修服务提供商，以进行更换。
产品耦合器用作断开连接设备。
请确保设备安装在其连接的墙上插座附近并可轻松使用墙上插座。
只能根据本手册规格中指明的或显示器上列出的电源运行显示器。
如果不确定您家里的电源类型，请咨询您的经销商。
交流电源插座过载和延长线都会产生危险。
电源线磨损和插头破损也是如此。
它们可能会造成触电或火灾危险。
请联系维修技术人员进行更换。
只要此设备连接到交流电墙上插座，则即使设备关闭，与交流电源的连接也不会断开。
请勿打开显示器：� 设备内无用户可维修的组件。
� 即使电源关闭时，设备内也有非常危险的高压。
� 如果显示器无法正常运行，请联系您的经销商。
为避免人身伤害：� 不要将显示器放置在倾斜的支架上，除非已正确固定。
kld产品规格书
光盘
■DVD■DVD-R■DVD-RW■VCD■SVCD■CD■CD-R
■CD-RW■MP3□CD-ID□RM□RMVB■DIVX■AVI□其它
视频制式：□PAL□NTSC■PAL/NTEC□其它
外接牒盒：□DVD□VCD□CD（□6碟□10碟□12碟）
TFT屏
ห้องสมุดไป่ตู้类型: □模拟 ■数字
生产厂家: □群创 □AU □CPT □天马 □元太 ■其它
TFT屏尺寸: ■8" □6.5" □6.2" □4.5" □4.2" □3" □2.5"
导航
GPS: ■内置 □外挂
电视
TV: □模拟 □数字 □内置 □外挂 □其它
蓝牙
BLUETOOTH: ■内置 □外挂
蓝牙咪头： ■内置 □外置
二、产品特性
序号
客户要求
范围
备注
1
收星颗数
≥5颗
2
静态电流
≤10MA
三、工作条件
序号
工作条件
范围
备注
1
工作温度范围
-20℃-+60℃
2
工作湿度范围
30%-80%
3
工作电压范围
9V-15.5V
制表：审核：批准：
2.VIDEO：■1CH□CH (□RCA座■RCA线)
3.倒车视频输入 ■有 □无
等响度控制（LOUDNESS）：■有□无
其它功能
遥控方式：■红外□RF□有线□无 □其它
出线方式：□散线□ISO线 □小16位输出线 ■其它：专用
时钟：□12小时□24小时■12/24小时
LP-200-3-20S 电子炉说明书
MU-PO-EA-00APRIL 28 2015THIS PAGE IS INTENTIONALLY LEFT BLANKHERE ARE SOME STICKERS YOU WILL FIND ON YOUR OVEN:DANGER-WARNINGNever put your hands inside the oven while theconveyor is moving.LP-200-3-20SP00087112014208-240V/3PH/60Hz65ATHIS PAGE IS INTENTIONALLY LEFT BLANKWARNINGSFOR YOUR SAFETY:Do not store or use gasoline or other flammable vapour or liquids in the around of this oven orany other appliance.WARNINGImproper installation, adjustment, alteration, service or maintenance may result in property damage, injury or even death. Read the installation operating guidelines and maintenanceinstructions thoroughly before installing or servicing this equipment.WARNING:Minimal distance required between the oven and flammable material: 2 inch clearance.THIS MANUAL MUST BE KEPT FOR FUTURE REFERENCESTORE IT IN A PLACE EASILY ACCESSIBLE.THIS PAGE IS INTENTIONALLY LEFT BLANKCONGRATULATIONS!YOU ARE NOW THE OWNER OF A NEW PICARD TUNNEL OVENRegarding your business concern, we are convinced that you will enjoy your equipment and, on behalf of the company, we do appreciate your choice.Your new tunnel oven was built using the latest technology and was designed with production proven reliability. A team of experienced technicians completed the manufacturing of the approved equipment committed to excellence.MANUFACTURING IMPROVEMENTS AND FEATURES-Designed and built with care and precision for trouble-free running.-Easy to operate and clean.-Because most of the manufacturing can now be done in our factory, the result is a better end final product.-Application of different kinds of hi-tech on electronics and materials.TABLE OF CONTENTSCautions 9∙Operating, installing and technical service 10 ∙External dimensions 11Control panel functioning 12Maintenance chart 13-14Interior view 16 ∙Vault view 17 ∙Interior view 18 ∙Element and support conveyor view 19 ∙Conveyor and driving motor view 20 ∙Entrance view 21Control panel 22 ∙Electrical box 23 ∙Electrical diagram 24WARNING!DO NOT SPRAY LIQUIDS OR VAPORS ON OR NEAR ELECTRICAL EQUIPMENT. DO NOT USE THIS APPLIANCE IF ANY OF ITS PARTS HAVE BEEN UNDER WATER. CONTACT IMMEDIATELY A QUALIFIED SERVICE TECHNICIAN TO INSPECT THE APPLIANCE AND TO REPLACE ANY PARTS OF THE CONTROL SYSTEM AND GAS CONTROL WHICH HAVE BEEN UNDER WATER.PICARD TUNNEL OVEN OPERATING, INSTALLING ANDTECHNICAL SERVICE :Operational information on this equipment has been prepared to be used by a qualified and/or authorized operating personnel. All installation and/or service on this equipment is to be performed by qualified, certified, licensed and/or authorized installation or technical service person. Service may be obtained by contacting the factory service department, factory representative or local service agency.DEFINITIONS :- QUALIFIED INSTALLATION PERSONNEL:Qualified installation personnel can be represented by; an individual, a firm, a corporation or a company which, either in person or through a representative is involved and is responsible for: 1.The installation of electrical wiring from the electric meter, main control box or serviceoutlet to the electric appliance. The qualified installation technician must be experienced in such work, be familiar with all required precautions, and have complied with allrequirements of state or local authorities having jurisdiction.2.The appliance, when installed, must be electrically grounded in accordance with localcodes, or in the absence of local codes, with the National Electrical code ANSI/NFPA 70, or the Canadian Electrical code, CSAC22.1 No 109 or conform to UL STD 197.PICARD TUNNEL OVEN EXTERNAL DIMENSIONS(RIGHT SIDE SHOWN, LEFT SIDE AS IS)PICARD TUNNEL OVEN CONTROL PANELBAKING TIME1Displays baking time.2Press this key to increase the baking time. 3Press this key to decrease the baking time.04 05 06 07Baking timePilot lighting, warning of the outbreak of high temperature limitPICARD TUNNEL OVEN MAINTENANCELUBRICATING THE CHAIN FOR CONVEYOR1.Set the temperature to 180 ˚F or 83 ˚C.2.Remove the exit guard to access the chains.3.Turn ON the conveyor to its maximum speed.e the jog buttons to turn move forward the conveyor.e graphite based oil on its entire length at the 4 places indicated by the arrows on thedrawing above.CLEANING UP THE CONVEYOR1.Lower the oven internal temperature to 150 ˚F or 66 ˚C.2.Remove the exit guard.3.Turn ON the conveyor to its maximum speed.4.Clean up the conveyor with one of the scrapers sent with the oven. Afterwards, clean itup again with a rag and warm water.HOW TO REMOVE THE ENTRY CONVEYOR FOR CLEANINGExit guardPICARD TUNNEL OVEN PARTS SECTIONPICARD TUNNEL OVENINTERIOR VIEW02010304(RIGHT SIDE SHOWN, LEFT SIDE AS IS)0102020403PICARD TUNNEL OVEN INTERIOR VIEWc02060703080504PICARD TUNNEL OVEN ELEMENT AND CONVEYOR SUPPORT VIEW0403 02030401CONVEYOR SUPPORTENTER CONVOYERPICARD TUNNEL OVEN CONVEYOR AND DRIVING MOTOR VIEWPART # DESCRIPTION:QUANTITY: 05060708CONVEYORDRIVING MOTOR09PICARD TUNNEL OVEN ENTRANCE VIEW0809 0710 11(RIGHT SIDE SHOWN, LEFT SIDE AS IS)PICARD TUNNEL OVEN CONTROL PANELPICARD TUNNEL OVEN ELECTRICAL BOX11(3.5"),13 01,10 (01,15)x2 03,04 13 "),1305 1612(3x17)170905A P P E N D IX。
P3户内全彩高清LED显示屏技术规格书
P3户内全彩高清LED显示屏技术规格书大地照明有限公司张燕凤 186********目录一.产品说明: (2)二.主要规格参数: (3)三.具体参数: (5)四.显示屏的特点: (8)五.显示屏的控制特性和功能: (9)六.显示屏系统原理简介: (12)七. 产品品质保证和包装: (14)产品说明:LED显示屏是近年来应用十分广泛的高科技显示设备，具有清晰度高、质量稳定、寿命长、显示功能灵活多变的特点，十分适用于文字、图形和多媒体节目的播放宣传。
在户外的显示领域，它甚至占据了不可取代的地位。
产品选型全彩LED显示屏可用于播放时事新闻、娱乐信息、商业广告、影视动画等各种多种媒体类型内容，从而达到视听一体的效果。
LandLighting-P3是一款专为渠道项目设计，广泛应用各种工程及租赁项目，可随意播放视频、图文、图像并茂的节目，并以实时、同步、清晰的信息传播方式播放各种信息。
P3 显示屏主要技术参数6、主要技术参数1)驱动器件：恒流驱动2)扫描方式:1/16扫描3)屏幕刷新速率:>500Hz4)图像传输速度:≥60Hz5)灰度/颜色:4K/显示12.5颜色6)亮度:1800 cd/m2 最大亮度可达到2000 cd/m27)亮度调节方式：软件16级可调8)视频信号:RF、S-Video、RGB、RGBHV、YUV、YC、COMPOSITION等9)控制系统采用:PCTV卡(可选)+DVI显卡+主控卡+光纤传输(可选)10)寿命:10万小时11)平整度：任意相邻像素间≤0.5mm;单元板拼接间隙<0.5mm ;12)均匀性：像素光强、单元板亮度均匀13)杂点率:<0.000214)开关电源负荷:5V/40A15)计算机显示模式:1024×76816)常亮点：无17)防护等级: ≥IP6018)有效通讯距离：网线100m(无中继)，多模光纤500m，单模光纤20km8、控制方式WINXP计算机+控制软件硬件+播放软件及硬件9、保护技术防潮、防尘、防腐、防静电、防雷击，同时具有过流、短路、过压、欠压保护功能。
广告机系列说明书
目录1．产品概述…………………………页码2 2．注意事项………………………页码2-3 3．安装说明………………………页码3-5 4．播放文件……………………….页码6-7 5．菜单描述及操作……………页码7-10 6．技术规格……………………页码11 7．常见故障分析………………页码11-12 8．不保修范围…………………页码12-13 9．装箱单………………………页码13尊敬的用户：欢迎您进入精彩纷呈的液晶多媒体广告机世界。
这款融先进数码科技与创新广告理念为一体的广告机，一定会给您带来全新的视觉体验。
为了您更好的使用该产品，请您先仔细阅读本说明书并妥善保存，以备日后参考。
一、产品概述:本说明书所描述的机种具内置定时器、整机防盗功能，适用于我司：10.4寸、15寸、17寸、19寸、20寸、22寸、32寸等液晶多媒体广告机。
二、注意事项1、在清洁本机屏幕前，请先拔掉电源线，确保广告机处于断电状态下，用干净柔软不带线头的布轻轻的擦拭，切勿在屏幕上直接使用喷雾剂。
2．不要将产品暴露于雨水、日晒的环境中，以免影响产品的正常使用。
3．请不要将广告机壳体上的通风孔、音响发音孔堵塞。
切勿将广告机放在散热器、热源或其它任何可能影响正常通风的设备附近。
4．切勿对广告机进行自行拆卸或修理，以免高压触电或其它危险，应请专业的维修人员来完成所有的维修工作。
5．由于广告机多数使用于公共场所，电压不稳可能造成设备损伤。
建议使用稳定的市电，切不可和电梯电源等大功率设备共同使用一个电源.如在电压经常不稳定的地方如：地铁站等，请务必使用相应的稳压设备进行稳压，否则易造成广告机不稳定工作，甚至会烧毁广告机。
6．在插拔CF卡之前请仔细阅读本说明书，如果CF卡插不上去，不要硬插，以免损坏CF卡插针，出现此问题的时候，需要检查一下是否插反了。
正确插法：当广告机挂放在墙上后，CF 卡正面朝墙放置于卡槽内。
7．请不要在开机状态下插拔CF卡，应在关机之后进行操作。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
Backlight assembly (White LED)
General features
Active screen size Outline Dimension Pixel Pitch Pixel Format Interface Color depth Luminance, white Viewing Angle (CR>10) Power Consumption Weight Display operating mode Surface treatments
RGB
Source driver circuit
S1 S1600 G1
LVDS pair #1 LVDS pair #2 CN1
Timing controller (1600×RGB×900 pixels)
G900
TFT-LCD Panel
+5V VLCD
Power circuit block
VLED 2ch
Dec., 02, 2010 4 / 32
PDF created with pdfFactory trial version
LM200WD3 Liquid Crystal Display
Product Specification
2. Absolute maximum ratings
LM200WD3 Liquid Crystal Display
Product Specification
SPECIFICATION FOR APPROVAL
(◆) Preliminary Specification (◆) Final Specification
Title
BUYER MODEL HP
20.0” HD+ TFT LCD
SUPPLIER *MODEL SUFFIX LG Display Co., Ltd. LM200WD3 TLC9
*When you obtain standard approval, please use the above model name without suffix
Please return 1 copy for your confirmation With your signature and comments.
Ver. 0.1
Dec., 02, 2010
1 / 32
PDF created with pdfFactory trial version
90% 60 60% Wet Bulb Temperature [℃] 40 30 20 10 0 10% 10 20 30 40 50 60 70 80 50 Humidity [(%)RH] Storage
40%
Operation
-20
0
Dry Bulb Temperature [℃]
Ver. 0.1
2 / 32
Ver. 0.1
Dec., 02, 2010
PDF created with pdfFactory trial version
LM200WD3 Liquid Crystal Display
Product Specification
Record of revisions
LM200WD3 Liquid Crystal Display
Product Specification
Contents
No COVER CONTENTS RECORD OF REVISIONS 1 2 3 1) 2) 3) 4) 5) 6) 7) 8) 4 5 6 7 1) 2) 3) 8 1) 2) 9 1) 2) 3) 4) 5) 6) GENERAL DESCRIPTION ABSOLUTE MAXIMUM RATINGS ELECTRICAL SPECIFICATIONS ELECTRICAL CHARACTERISTICS INTERFACE CONNECTIONS LVDS characteristics SIGNAL TIMING SPECIFICATIONS SIGNAL TIMING WAVEFORMS COLOR INPUT DATA REFERNECE POWER SEQUENCE POWER DIP CONDITION OPTICAL SFECIFICATIONS MECHANICAL CHARACTERISTICS RELIABILITY INTERNATIONAL STANDARDS SAFETY EMC ENVIRONMENT PACKING DESIGNATION OF LOT MARK PACKING FORM PRECAUTIONS MOUNTING PRECAUTIONS OPERATING PRECAUTIONS ELECTROSTATIC DISCHARGE CONTROL PRECAUTIONS FOR STRONG LIGHT EXPOSURE STROAGE HANDLING PRECAUTIONS FOR PROTECTION FILM ITEM Page 1 2 3 4 5 6 6 8 11 14 15 16 18 19 19 25 28 29 29 29 29 30 30 30 31 31 31 32 32 32 32
Dec., 02, 2010
5 / 32
PDF created with pdfFactory trial version
Note : 1. Temperature and relative humidity range are shown in the figure below. Wet bulb temperature should be 39 °C Max, and no condensation of water. Note : 2. Storage condition is guaranteed under packing condition. FIG. 2 Temperature and relative humidity
Ver. 0.1
20.0 inches (508.05mm) diagonal 462.8(H) x 272.0(V) x 10.2(D) mm(Typ.) 0.0922*RGB(H)mm x 0.2766(V)mm 1600 horizontal By 900 vertical Pixels. RGB stripe arrangement LVDS 2Port 16.7M colors 250 cd/m2 ( Center 1Point, typ) R/L 170(Typ.), U/D 160(Typ.) Total 14.2 W(Typ.), (4.3 W@VLCD , 9.9 W@IBL = 110 mA) 1,530 g (Typ.) Transmissive mode, normally White Hard coating (3H), Anti-glare treatment of the front polarizer
Revision No
Ver.0.1
Date
Dec.,02,2010
Page
Description
Preliminary Specifications.
Ver. 0.1
Dec., 02, 2010
3 / 32
PDF created with pdfFactory trial version
LM200WD3 Liquid Crystal Display
Product Specification
1. General description
LM200WD3-TLC9 is a Color Active Matrix Liquid Crystal Display with an integral Light Emitting Diode(LED) backlight system. The matrix employs a-Si Thin Film Transistor as the active element. It is a transmissive type display operating in the normally white mode. It has a 20.0 inch diagonally measured active display area with HD+ resolution (900 vertical by 1600 horizontal pixel array) Each pixel is divided into Red, Green and Blue sub-pixels or dots which are arranged in vertical stripes. Gray scale or the brightness of the sub-pixel color is determined with a 8-bit gray scale signal for each dot, thus, presenting a palette of more than 16.7M colors with Advanced-FRC(Frame Rate Control). It has been designed to apply the interface method that enables low power, high speed, low EMI. FPD Link or compatible must be used as a LVDS(Low Voltage Differential Signaling) chip. It is intended to support applications where thin thickness, wide viewing angle, low power are critical factors and graphic displays are important. In combination with the vertical arrangement of the sub-pixels, the LM200WD3-TLC9 characteristics provide an excellent flat panel display for office automation products such as monitors. FIG. 1 Block diagram