销售合同英语翻译范本正式版

合集下载

英文销售合同模板3篇

英文销售合同模板3篇篇1Seller: ________ (Seller's Name)Buyer: ________ (Buyer's Name)This Sales Contract is made on ________ (Date) by and between the Seller and the Buyer:WHEREAS the Seller is willing to sell and the Buyer is willing to purchase the under mentioned commodity according to the terms and conditions stipulated below:I. commodity:The Seller agrees to sell and the Buyer agrees to purchase the following commodity:_______ (Commodity details, including product name, model, quantity, specifications, quality, etc.)II. Origin of the Goods: ________ (Origin of Goods)III. Price and Payment Terms:The Price of the commodity is to be fixed as ________ (Price) only. The payment shall be made as follows:1. A deposit of 10% of the total contract value shall be paid by the Buyer to the Seller's account within ________ (Time Limit) after this contract is signed.2. The balance of payment shall be made by the Buyer against the Seller's presentation of shipping documents through a bank in ________ (Bank Name) within ________ (Time Limit) after the date of shipment.IV. Delivery:篇2SALES CONTRACTThis Sales Contract is made by and between the following two parties:Buyer: ______________ (Hereinafter referred to as "Party A")Seller: ______________ (Hereinafter referred to as "Party B")In accordance with the principles of sincerity and mutual benefit and the relevant laws and regulations, both parties,through friendly consultations, agree to the following terms and conditions for the sale of products:Article 1: Product Description and QuantityProduct name: _______________Product specifications: _______________Product quantity: _______________ (Number of items)Delivery date: _______________Other specific requirements: _______________ (If any)Article 2: Price and Payment TermsTotal contract value: USD _______________ (The total contract value should be clearly stated)Price terms: FOB/CIF/CFR _______________ (Price terms should be clearly stated)Payment terms: _______________% T/T in advance,_______________% against the copy of B/L. Other payment methods such as L/C at sight are also acceptable.Article 3: Delivery and Shipping TermsDelivery time: _______________ (Delivery time should be clearly stated)Port of loading: _______________ (The port of loading should be clearly stated)Means of transportation: By sea/By air/By land, etc. (As agreed by both parties)Other shipping terms and conditions: _______________ (If any)Article 4: Quality Standards and WarrantyQuality standards: in accordance with the standards specified in the contract or the standards commonly used in the international market. If there is no such standard, it shall be agreed by both parties.Other specific quality requirements: _______________ (If any)Article 5: Inspection and AcceptanceArticle 6: Packing and MarkingArticle 7: Delay Delivery PenaltyArticle 8: Settlement of DisputesArticle 9: Other TermsBuyer Signature ____________________________________________ Date ___________________ Seller Signature____________________________________________ Date___________________ （Signature）（Date）（Signature）（Date）请注意，上述合同仅为示例并非专业法律意见。

英文销售合同模板3篇

英文销售合同模板3篇篇1Sales Contract TemplateThis Sales Contract (the "Contract") is entered into between [Seller Name], a company organized and existing under the laws of [Seller's Country], with its principal place of business at [Seller's Address] (hereinafter referred to as the "Seller"), and [Buyer Name], a company organized and existing under the laws of [Buyer's Country], with its principal place of business at [Buyer's Address] (hereinafter referred to as the "Buyer").1. Sale of GoodsThe Seller agrees to sell, and the Buyer agrees to purchase, the following goods (the "Goods"):Description of Goods: [Description]Quantity: [Quantity]Price: [Price]2. DeliveryThe Seller agrees to deliver the Goods to the Buyer at the following location: [Delivery Address]. The Goods shall be delivered on or before the agreed upon delivery date, which is [Delivery Date].3. PaymentThe Buyer agrees to pay the Seller the total purchase price of [Total Purchase Price] in the following manner:- [Payment Method] in the amount of [Deposit Amount] upon signing of this Contract- [Payment Method] in the amount of [Balance Amount] upon delivery of the Goods4. Title and Risk of LossTitle to the Goods shall pass to the Buyer upon delivery. The risk of loss or damage to the Goods shall pass to the Buyer upon delivery.5. WarrantiesThe Seller warrants that the Goods are free from defects in materials and workmanship and conform to the specifications as set forth in this Contract.6. Limitation of LiabilityThe Seller shall not be liable for any indirect, incidental, special, or consequential damages arising out of or in connection with this Contract.7. Governing LawThis Contract shall be governed by and construed in accordance with the laws of [Seller's Country].In witness whereof, the parties hereto have executed this Contract as of the date first above written.Seller: ______________________________Buyer: ______________________________[Signature][Print Name][Title][Date]篇2Sales Contract TemplateThis Sales Contract ("Contract") is made and entered into as of [date] by and between [Seller], with a principal place ofbusiness at [address] ("Seller"), and [Buyer], with a principal place of business at [address] ("Buyer").1. Sale of Goods: Seller agrees to sell and Buyer agrees to purchase the following goods (the "Goods"): [description of goods], in accordance with the terms and conditions of this Contract.2. Quantity and Price: The quantity of Goods to be sold and purchased, as well as the price per unit, shall be as set forth in Exhibit A attached hereto and incorporated herein by reference.3. Payment Terms: Buyer shall pay Seller the total purchase price for the Goods within [number] days of the date of delivery of the Goods. Payment shall be made in [currency] by [method of payment].4. Delivery: Seller shall deliver the Goods to Buyer at [delivery location] on or before [delivery date]. Buyer shall be responsible for all shipping and handling costs associated with the delivery of the Goods.5. Inspection and Acceptance: Buyer shall have [number] days from the date of delivery of the Goods to inspect the Goods and notify Seller in writing of any defects or nonconformities.Failure to give such notice shall constitute acceptance of the Goods by Buyer.6. Warranties: Seller warrants that the Goods shall conform to the specifications set forth in this Contract and shall be free from defects in material and workmanship for a period of [number] days from the date of delivery.7. Limitation of Liability: In no event shall either party be liable for any incidental, consequential, or punitive damages arising out of or in connection with this Contract, whether based on warranty, contract, tort, or any other legal theory.8. Governing Law: This Contract shall be governed by and construed in accordance with the laws of the State of [state], without regard to its conflicts of laws principles.9. Entire Agreement: This Contract constitutes the entire agreement between the parties with respect to the sale and purchase of the Goods and supersedes all prior and contemporaneous agreements and understandings, whether written or oral.IN WITNESS WHEREOF, the parties hereto have executed this Contract as of the date first above written.Seller:_____________________________________[Signature]Buyer:_____________________________________[Signature]篇3Sales Contract TemplateThis Sales Contract is entered into on [Date], by and between [Seller's Name], with a business address at [Address] (hereinafter referred to as "Seller"), and [Buyer's Name], with a business address at [Address] (hereinafter referred to as "Buyer").WHEREAS, the Seller is engaged in the business of selling [Products or Services]; andWHEREAS, the Buyer desires to purchase [Products or Services] from the Seller under the terms and conditions set forth herein;NOW, THEREFORE, in consideration of the mutual promises and covenants set forth in this Sales Contract, the parties agree as follows:1. Products or Services: The Seller agrees to sell and deliver to the Buyer the following products or services: [Detailed description of products/services, including quantity, quality, specifications, and delivery date].2. Purchase Price: The purchase price for the products or services shall be [Amount] per [Unit] for a total of [Total Amount]. Payment shall be made by the Buyer to the Seller in [Payment Method] upon delivery of the products or services.3. Delivery: The Seller shall deliver the products or perform the services at the location specified in writing by the Buyer. Delivery shall be made on or before [Delivery Date], unless otherwise agreed upon in writing by the parties.4. Inspection and Acceptance: The Buyer shall have [Number of Days] days after delivery to inspect the products or services and notify the Seller in writing of any defects or nonconformities. If the Buyer fails to notify the Seller within the specified time frame, the products or services shall be deemed accepted.5. Warranties: The Seller warrants that the products or services will conform to the specifications set forth in this Sales Contract. The Seller further warrants that the products are free from defects in materials and workmanship for a period of [Warranty Period] days from the date of delivery.6. Limitation of Liability: The Seller's liability under this Sales Contract shall be limited to the purchase price paid by the Buyer for the products or services. In no event shall the Seller be liable for any consequential, incidental, or punitive damages.7. Governing Law: This Sales Contract shall be governed by and construed in accordance with the laws of the state of [State], without regard to its conflict of laws principles.IN WITNESS WHEREOF, the parties have executed this Sales Contract as of the date first above written.Seller: _______________________Buyer: _______________________[Signatures of parties][Printed Names of parties]This Sales Contract constitutes the entire agreement between the parties with respect to the subject matter hereof and supersedes all prior or contemporaneous agreements, understandings, negotiations, and discussions, whether oral or written. This Sales Contract may be amended only by a written instrument executed by both parties.。

关于英文销售合同范本6篇

关于英文销售合同范本6篇篇1Sales ContractThis Sales Contract (“Contract”) is made and entered into by and between Seller and Buyer on this day___________(date).1. Sale of Goods:Seller agrees to sell to Buyer, and Buyer agrees to purchase from Seller, the following goods:- Description of goods- Quantity- Price2. Payment Terms:Buyer shall pay Seller the total amount of $_____________ for the goods purchased. Payment shall be made in full within ______ days of the date of this Contract. Payment shall be made in the form of [cash, check, wire transfer, etc.].3. Delivery:Seller shall deliver the goods to Buyer at the following address:- Delivery addressDelivery shall be made on or before ____________(date). Time is of the essence in this Contract.4. Inspection:Buyer shall have the right to inspect the goods upon delivery. Buyer must notify Seller of any defects or nonconformities within _______ days of delivery.5. Warranties:Seller warrants that the goods:- Are free from defects in material and workmanship- Conform to the specifications set forth in this Contract- Are fit for the particular purpose for which they are intendedSeller’s liability under this warranty shall be limited to repairing or replacing the defective goods.6. Indemnification:Seller shall indemnify and hold Buyer harmless from and against any claims, damages, losses, liabilities, and expenses arising out of or related to the goods sold under this Contract, including but not limited to claims of infringement of intellectual property rights.7. Governing Law:This Contract shall be governed by and construed in accordance with the laws of the State of___________.8. Entire Agreement:This Contract constitutes the entire agreement between the parties with respect to the sale of the goods and supersedes all prior agreements, representations, and understandings.IN WITNESS WHEREOF, the parties have executed this Contract as of the date first above written.Seller____________________________Buyer____________________________This document reflects the entire agreement between Seller and Buyer for the sale of goods in question. It is recommended that both parties review this Contract carefully and seek legal advice if necessary before signing.篇2Sales ContractThis Sales Contract (“Contract”) is entered into on [Date] by and between [Seller], located at [Address] (“Seller”) and [Buyer], located at [Address] (“Buyer”).1. Sale of GoodsSeller agrees to sell to Buyer, and Buyer agrees to purchase from Seller, the following goods (the “Goods”): [Description of Goods] in the quantity and price set forth in Exhibit A attached hereto.2. DeliverySeller shall deliver the Goods to Buyer at the location specified by Buyer on [Delivery Date]. Buyer shall be responsible for all shipping costs.3. PaymentBuyer shall pay Seller the total purchase price for the Goods in the amount of [Total Amount], payable as follows: [Payment Terms]. Payment shall be made in [Currency] by [Payment Method].4. InspectionBuyer shall have [Number] days from the date of delivery to inspect the Goods. If Buyer finds any defects or nonconformities, Buyer shall notify Seller in writing within [Number] days of the delivery date. Seller shall have the option to refund Buyer or replace the defective Goods.5. Representations and WarrantiesSeller represents and warrants that the Goods are free from defects in materials and workmanship and are fit for the purpose intended.6. Limitation of LiabilityIn no event shall Seller be liable to Buyer for any indirect, special, incidental, or consequential damages arising out of or in connection with this Contract.7. Governing LawThis Contract shall be governed by and construed in accordance with the laws of [State/Country].8. Entire AgreementThis Contract constitutes the entire agreement between Seller and Buyer and supersedes any prior agreements or understandings.IN WITNESS WHEREOF, the parties hereto have executed this Sales Contract as of the date first above written.Seller: _____________________________Buyer: ______________________________Exhibit A: Description of Goods[Insert Description of Goods][Signatures]This Sales Contract is hereby executed by the parties as of the date first above written.Seller: _____________________________Buyer: ______________________________I. General Terms and ConditionsThis Sales Contract (the "Agreement") is entered into by and between [SELLER NAME] ("Seller") and [BUYER NAME] ("Buyer") on [SIGNING DATE] (the "Effective Date"). Seller and Buyer agree as follows:1. Sale, Quantity, and Description of Goods. Seller agrees to sell and Buyer agrees to purchase the goods (the "Goods") in the quantities and descriptions set forth in Exhibit A attached hereto.2. Purchase Price. The purchase price for the Goods shall be as set forth in Exhibit A and shall be paid to Seller in accordance with the payment terms set forth in Exhibit B.3. Delivery of Goods. The Goods shall be delivered by Seller to Buyer at the location specified by Buyer on or before the delivery date set forth in Exhibit A.4. Title and Risk of Loss. Title to and risk of loss for the Goods shall pass to Buyer upon delivery of the Goods by Seller to the carrier at the point of shipment.5. Inspection and Acceptance. Buyer shall have [NUMBER] days from the date of delivery of the Goods to inspect the Goods and to notify Seller of any nonconformities. Buyer's failure to notify Seller of any nonconformities within such period shall constitute acceptance of the Goods.6. Warranties. Seller hereby warrants that the Goods shall conform to the specifications set forth in Exhibit A and shall be free from defects in material and workmanship. Seller's liability under this warranty shall be limited to replacement of the nonconforming Goods.7. Limitation of Liability. In no event shall Seller be liable to Buyer for any special, consequential, or incidental damages arising out of or relating to this Agreement.8. Governing Law. This Agreement shall be governed by and construed in accordance with the laws of the State of [STATE].9. Entire Agreement. This Agreement constitutes the entire agreement between Seller and Buyer with respect to the sale of the Goods and supersedes all prior agreements or understandings, whether written or oral.IN WITNESS WHEREOF, the parties hereto have executed this Agreement as of the Effective Date.SELLER: BUYER:_________________________ _________________________[SELLER NAME] [BUYER NAME]Exhibit A: Description of Goods[DESCRIPTION OF GOODS]Exhibit B: Payment Terms[PAYMENT TERMS]II. Specific Provisions1. Termination. This Agreement may be terminated by either party upon [NUMBER] days written notice for any reason.2. Force Majeure. Neither party shall be liable for any failure or delay in performing its obligations under this Agreement to the extent such failure or delay is caused by circumstances beyond its reasonable control.3. Confidentiality. Seller and Buyer shall keep confidential all information received from the other party in connection with this Agreement and shall not disclose such information to any third party without the other party's prior written consent.4. Assignment. Neither party may assign its rights or obligations under this Agreement without the other party's prior written consent.5. Counterparts. This Agreement may be executed in one or more counterparts, each of which shall be deemed an original and all of which together shall constitute one and the same instrument.6. Modification. This Agreement may be modified only by a written instrument signed by both parties.IN WITNESS WHEREOF, the parties hereto have executed this Agreement as of the Effective Date.SELLER: BUYER:_________________________ _________________________[SELLER NAME] [BUYER NAME]篇3Sales ContractThis sales contract (the "Contract") is made and entered into on [date], by and between [Seller name], having its principal place of business at [Seller address] and [Buyer name], having its principal place of business at [Buyer address].1. Goods Sold: The Seller agrees to sell and deliver to the Buyer the following goods (the "Goods"):- [Description of goods]- Quantity: [Number of units]- Price: [Price per unit]2. Payment Terms: The Buyer agrees to pay the Seller the total amount of [total amount] for the Goods. Payment shall be made in [currency] within [number] days of the delivery of the Goods.3. Delivery: The Seller agrees to deliver the Goods to the Buyer at the following location: [Delivery address]. Delivery shall be made on or before [delivery date].4. Inspection: The Buyer shall have the right to inspect the Goods upon delivery. If the Goods are not in conformity with the Contract, the Buyer may reject the Goods and notify the Seller within [number] days.5. Warranty: The Seller warrants that the Goods are free from defects in materials and workmanship. If any defects are found within [warranty period], the Seller shall replace the Goods at no additional cost to the Buyer.6. Governing Law: This Contract shall be governed by the laws of [State/Country]. Any disputes arising out of or in connection with this Contract shall be resolved through arbitration in [City], in accordance with the rules of the [Arbitration association].7. Entire Agreement: This Contract constitutes the entire agreement between the parties and supersedes all prior agreements and understandings, whether written or oral, relating to the subject matter of this Contract.IN WITNESS WHEREOF, the parties hereto have executed this Sales Contract as of the date first above written.[Seller Signature] [Buyer Signature]篇4Sales ContractThis Sales Contract (hereinafter referred to as the "Contract") is made and entered into on [Date], by and between [Seller], with a business address at [Address], and [Buyer], with a business address at [Address].1. Sale of Goods: The Seller agrees to sell and the Buyer agrees to purchase the following goods: [Description of Goods]2. Price: The total purchase price for the goods shall be [Price]. The price is inclusive of all taxes, duties, and other charges.3. Delivery: The Seller shall deliver the goods to the Buyer at [Delivery Location] on or before [Delivery Date]. The Buyer shall bear any additional costs for expedited delivery.4. Payment: The Buyer shall pay the total purchase price in full upon delivery of the goods. Payment shall be made in [Currency] by [Payment Method].5. Warranties: The Seller warrants that the goods shall be free from defects in material and workmanship for a period of [Warranty Period]. The Seller shall repair or replace any defective goods at no additional cost to the Buyer.6. Indemnification: The Seller shall indemnify and hold harmless the Buyer from any claims, damages, or liabilities arising from the use or sale of the goods.7. Governing Law: This Contract shall be governed by the laws of [Jurisdiction]. Any disputes arising out of or relating to this Contract shall be resolved through arbitration in [Arbitration Location].8. Entire Agreement: This Contract constitutes the entire agreement between the parties with respect to the sale of goods and supersedes all prior agreements, written or oral.IN WITNESS WHEREOF, the parties have executed this Contract on the date first above written.Seller: ________________________Buyer: ________________________Date: ________________________This Sales Contract is a legally binding agreement between the Seller and the Buyer for the sale of goods. Both parties should carefully review and understand the terms and conditions before signing.篇5Sales contract1. Parties to the contract:This Sales Contract (hereinafter referred to as "Contract") is entered into between:Seller: [Name of the Seller]Registered address: [Address of the Seller]Contact person: [Name of the Contact person]Telephone: [Contact number]Email: [Email address]Buyer: [Name of the Buyer]Registered address: [Address of the Buyer]Contact person: [Name of the Contact person]Telephone: [Contact number]Email: [Email address]2. Product details:The Seller agrees to sell and the Buyer agrees to purchase the following products:Product name: [Name of the product]Description: [Brief description of the product]Quantity: [Quantity of the product]Unit price: [Price per unit]Total price: [Total price of the products]3. Payment terms:The Buyer agrees to pay the total amount of the products to the Seller in the following manner:- 30% of the total amount as a deposit upon signing of the contract- 70% of the total amount upon delivery of the productsPayment method: [Payment method]Currency: [Currency]Payment deadline: [Deadline for payment]4. Delivery terms:The Seller agrees to deliver the products to the Buyer at the following address:Delivery address: [Address of delivery]Delivery method: [Method of delivery]Delivery time: [Time of delivery]5. Quality assurance:The Seller guarantees that the products supplied under this Contract meet the required quality standards. In case of any defects or non-conformities, the Seller agrees to replace or refund the affected products.6. Governing law:This Contract shall be governed by and construed in accordance with the laws of [Jurisdiction].7. Dispute resolution:Any disputes arising out of or in connection with this Contract shall be settled amicably through negotiations between the Parties. If no resolution can be reached, the Parties agree tosubmit the dispute to arbitration in accordance with the rules of [Arbitration Institution].8. Miscellaneous:This Contract constitutes the entire agreement between the Parties and supersedes any previous agreements or understandings, written or oral, relating to the subject matter hereof.In witness whereof, the Parties have executed this Contract as of the date first above written.Seller:Signature: _____________________Printed name: _________________Date: _______________________Buyer:Signature: _____________________Printed name: _________________Date: _______________________篇6Sales ContractThis Sales Contract ("Contract") is made and entered into as of [Contract Date], by and between [Seller], a company incorporated under the laws of [Seller's Country], with its principal place of business at [Seller's Address], and [Buyer], a company incorporated under the laws of [Buyer's Country], with its principal place of business at [Buyer's Address].1. Sale of Goods: Seller agrees to sell and Buyer agrees to purchase the goods described in Exhibit A attached hereto (the "Goods").2. Price: The Purchase Price shall be as set forth in Exhibit A, and shall be paid by Buyer to Seller in the manner set forth in Exhibit A.3. Delivery: Seller shall deliver the Goods to Buyer at the location set forth in Exhibit A. Delivery shall be made on or before the delivery date set forth in Exhibit A.4. Acceptance: Buyer shall inspect the Goods promptly upon delivery. If Buyer finds any defects in the Goods, Buyer shall notify Seller within [number] days of delivery and provide Seller with a written description of the defects. Upon receiving suchnotice, Seller shall take reasonable steps to correct the defects in the Goods.5. Title and Risk of Loss: Title and risk of loss to the Goods shall pass to Buyer upon delivery of the Goods to Buyer.6. Warranty: Seller warrants that the Goods will conform to the specifications set forth in Exhibit A. Seller further warrants that the Goods will be free from defects in materials and workmanship for a period of [number] months from the date of delivery.7. Limitation of Liability: In no event shall Seller be liable to Buyer for any indirect, special, incidental, consequential or punitive damages arising out of or in connection with this Contract, whether or not Seller has been advised of the possibility of such damages.8. Governing Law: This Contract shall be governed by and construed in accordance with the laws of [Jurisdiction].9. Entire Agreement: This Contract represents the entire agreement between the parties with respect to the sale of the Goods, and supersedes all prior agreements and understandings, whether written or oral.IN WITNESS WHEREOF, the parties have executed this Sales Contract as of the date first above written.[Seller]By: _______________________Name: _________________Title: _________________[Buyer]By: _______________________Name: _________________Title: _________________EXHIBIT AGoods: [Description of Goods]Purchase Price: [Price]Delivery Date: [Date]Delivery Location: [Address]。

销售合同英文范本5篇

销售合同英文范本5篇篇1SALES CONTRACTThis Sales Contract is made by and between the Buyer and the Seller:Buyer:Seller:WHEREAS the Seller is willing to sell the products listed in this Contract to the Buyer, and the Buyer is willing to purchase the same products under the terms and conditions stipulated below:1. Products and Specifications:The Seller agrees to sell and the Buyer agrees to purchase the products with the following specifications: (Please insert detailed product specifications, including product name, model number, quantity, quality, grade, size, color, packaging, etc.)2. Price and Payment:The price of the products shall be as per the list attached to this Contract. The total contract value is to be paid in (specify currency) according to the following schedule:* A deposit of XX% to be paid within XX days of signing this Contract.* The balance to be paid XX days prior to the date of shipment.All payments shall be made through the Buyer's bank account to the Seller's bank account. Details of banks and account numbers shall be communicated by both parties prior to signing this Contract.3. Delivery:The Seller shall deliver the products to the Buyer within XX days from the date of receiving the full payment. The products shall be delivered FOB (Free On Board) at the Seller's warehouse. The risk of loss or damage shall pass to the Buyer upon loading of the products onto the vessel.4. Quality Assurance:The Seller guarantees that all products are of good quality and comply with all applicable specifications and standards. The Seller shall replace any defective products free of charge within XX days of receipt by the Buyer.5. Warranty:The Seller guarantees that all products are warranted against any defects in material or workmanship for a period of XX months from the date of sale to the Buyer. During this period, any defective products shall be repaired or replaced free of charge as per the Seller's choice.6. Terms and Conditions of Shipment:The terms and conditions of shipment shall be governed by International Trade terms and conditions including Incoterms 20XX. The Seller shall provide necessary shipping documents to facilitate smooth delivery of the products to the Buyer.7. Confidentiality:Both parties shall keep confidential all information related to this Contract that is not meant for public disclosure. This confidentiality clause shall remain valid for a period of XX years from the date of signing this Contract.8. Force Majeure:Neither party shall be liable for any delay or failure in performance due to causes beyond their reasonable control, such as natural disasters, war, political events, etc. In such cases, the affected party shall immediately notify the other party of the situation and its possible consequences.9. Disputes:Any disputes arising out of or in connection with this Contract shall be settled through friendly negotiation between both parties. If no settlement can be reached, either party may submit such disputes to (specify court/arbitration institution) for resolution.10. General Clauses:Buyer: _____________________ Date: _________ Signature:_________Seller: _____________________ Date: _________ Signature:_________This Sales Contract is hereby witnessed by:Witness: _____________________ Date: _________ Signature: _________篇2SALES CONTRACT销售合同This Sales Contract is made by and between [Buyer’s Name], having its principal place of business at [Buyer’s Address] (hereinafter referred to as “Buyer”), and [Seller’s Name], havi ng its principal place of business at [Seller’s Address] (hereinafter referred to as “Seller”), on the terms and conditions stipulated below:兹有[买方名称]（以下简称“买方”）与[卖方名称]（以下简称“卖方”）根据以下条款和条件签订此销售合同：Article 1: Product Description and Quantity第一条：产品描述与数量The Seller agrees to sell and the Buyer agrees to purchase the under mentioned commodity:卖方同意出售，买方同意购买以下商品：[Product details, specifications, quantity, unit price, total value, etc.] （产品细节、规格、数量、单价、总价等）Article 2: Terms of Delivery第二条：交货条款The Seller shall deliver the goods within the time as stipulated in the contract. In case of failure on delivery on time, the Seller shall be held responsible for any loss caused to the Buyer. The risk of goods shall be borne by the Seller until they are delivered on board the vessel nominated by the Buyer. The Seller shall bear all expenses prior to delivery.卖方应在合同规定的时间内交货。

英文销售合同模板5篇

英文销售合同模板5篇篇1Sales ContractThis Sales Contract (the "Contract") is entered into on this ___ day of ____, 20__ (the "Effective Date"), by and between [Seller Name], with a principal place of business at [Seller Address] (the "Seller"), and [Buyer Name], with a principal place of business at [Buyer Address] (the "Buyer").1. Sale of Goods. Seller agrees to sell to Buyer, and Buyer agrees to purchase from Seller, the following goods (the "Goods"), as described in Exhibit A attached hereto.2. Purchase Price. The purchase price for the Goods shall be $____________, payable by Buyer to Seller in the following manner: [Payment terms].3. Delivery. Seller shall deliver the Goods to Buyer's address as specified in Exhibit A. Delivery shall be made on or before [Delivery date]. Buyer is responsible for all shipping and handling costs.4. Inspection and Acceptance. Buyer shall have the right to inspect the Goods upon delivery. Any Goods not conforming to the specifications in Exhibit A shall be rejected by Buyer. Seller shall promptly replace any rejected Goods at Seller's own cost.5. Warranties. Seller warrants that the Goods are free from defects in material and workmanship. Seller further warrants that the Goods will conform to the specifications in Exhibit A. Seller's warranties shall survive acceptance and payment by Buyer.6. Limitation of Liability. In no event shall either party be liable for any consequential, incidental, special, or punitive damages arising from or related to this Contract, whether based in contract, tort, or otherwise.7. Governing Law. This Contract shall be governed by and construed in accordance with the laws of the State of [State].8. Entire Agreement. This Contract constitutes the entire agreement between the parties with respect to the sale of the Goods and supersedes all prior discussions, agreements, and understandings.9. Counterparts. This Contract may be executed in counterparts, each of which shall be deemed an original, but all of which together shall constitute one and the same instrument.IN WITNESS WHEREOF, the parties have executed this Contract as of the Effective Date.Seller: [Seller Name]By:_____________________________Buyer: [Buyer Name]By:_____________________________Exhibit A - Description of Goods[Description of Goods]This Sales Contract is hereby accepted by the parties hereto as of the Effective Date.[Seller Name]: ___________________________[Buyer Name]: ___________________________篇2Sales ContractThis Sales Contract (the "Contract") is entered into by and between [Seller’s Name], with a registered address at [Seller’s Address] (the "Seller"), and [Buyer’s Name], with a registered address at [Buyer’s Address] (the "Buyer") on this [Date] (the "Effective Date").1. Sale of Goods: The Seller agrees to sell and deliver to the Buyer, and the Buyer agrees to purchase from the Seller, the goods described in Exhibit A (the "Goods") in the quantities and at the prices set forth therein.2. Purchase Price: The purchase price for the Goods shall be [Amount] per unit, for a total purchase price of [Total Amount]. Payment shall be made by the Buyer to the Seller in [Currency] within [Number] days of the date of delivery of the Goods.3. Delivery: The Seller shall deliver the Goods to the Buyer at the place of delivery identified in Exhibit A on the delivery date set forth therein. The Seller shall be responsible for all costs associated with packaging, labeling, and shipping the Goods to the Buyer.4. Inspection and Acceptance: The Buyer shall inspect the Goods upon delivery and shall notify the Seller in writing of any defects or discrepancies within [Number] days of delivery. Failure to provide such notice shall constitute acceptance of the Goods by the Buyer.5. Warranty: The Seller warrants that the Goods shall be free from defects in material and workmanship for a period of [Number] days from the date of delivery. In the event of a breachof this warranty, the Seller shall, at its option, repair or replace the defective Goods at no additional cost to the Buyer.6. Limitation of Liability: In no event shall either party be liable to the other for any indirect, consequential, incidental, special, or punitive damages arising from or related to this Contract, including but not limited to loss of profits or loss of business.7. Governing Law: This Contract shall be governed by and construed in accordance with the laws of [State/Country].IN WITNESS WHEREOF, the parties hereto have executed this Contract as of the Effective Date.Seller: ______________________ Date: ____________Buyer: ______________________ Date: ____________Exhibit A: Description of Goods[Provide detailed description of the Goods to be sold, including quantity, model numbers, and any other relevant information]This Sales Contract constitutes the entire agreement between the parties with respect to the sale and purchase of the Goods and supersedes all prior or contemporaneous agreementsor understandings, whether written or oral. This Contract may not be modified except in writing signed by both parties.篇3Sales ContractThis Sales Contract (hereinafter referred to as the "Contract") is entered into by and between [Seller's Name], a company organized and existing under the laws of [Seller's Country], with its principal place of business at [Seller's Address] (hereinafter referred to as the "Seller"), and [Buyer's Name], a company organized and existing under the laws of [Buyer's Country], with its principal place of business at [Buyer's Address] (hereinafter referred to as the "Buyer").1. Products: The Seller agrees to sell and the Buyer agrees to purchase the following products (the "Products"):- Description of Product 1- Description of Product 2- Description of Product 32. Quantity: The Buyer agrees to purchase [Quantity] units of each Product listed above.3. Price: The total purchase price for the Products shall be [Total Price] USD. The price includes all taxes, duties, and other charges.4. Payment: The payment shall be made in [Currency] within [Number] days of the date of this Contract. The Buyer shall make the payment by [Payment Method].5. Delivery: The Seller shall deliver the Products to the Buyer's address at [Delivery Address] within [Number] days of receiving the payment.6. Inspections and Acceptance: The Buyer shall inspect the Products within [Number] days of delivery. If the Products do not conform to the specifications in this Contract, the Buyer may reject the Products and the Seller shall replace them at no additional cost.7. Warranties: The Seller warrants that the Products are free from defects in materials and workmanship and conform to the specifications in this Contract. The Seller shall remedy any defects in the Products at its own expense.8. Termination: Either party may terminate this Contract by providing [Number] days' written notice to the other party.9. Governing Law: This Contract shall be governed by and construed in accordance with the laws of [Seller's Country].IN WITNESS WHEREOF, the parties hereto have executed this Contract as of the date first above written.Seller:Name: [Seller's Name]Title: [Seller's Title]Buyer:Name: [Buyer's Name]Title: [Buyer's Title]篇4Sales Contract TemplateThis Sales Contract (the "Contract") is made and entered into as of [Date], by and between [Seller], located at [Seller's Address] (the "Seller"), and [Buyer], located at [Buyer's Address] (the "Buyer").1. Sale of Goods: Seller agrees to sell to Buyer, and Buyer agrees to purchase from Seller, the following goods (the "Goods"): [Description of Goods].2. Price: The total purchase price for the Goods will be [Price] USD, payable by Buyer to Seller in the following manner: [Payment Terms].3. Delivery: Seller shall deliver the Goods to Buyer at [Delivery Address] on or before [Delivery Date]. Any additional costs incurred for delivery shall be borne by Buyer.4. Inspection and Acceptance: Buyer shall have [Number of Days] days from the date of delivery to inspect the Goods and notify Seller in writing of any defects or nonconformities. If Buyer fails to give notice within this time frame, the Goods shall be deemed accepted.5. Title and Risk of Loss: Title to the Goods shall pass to Buyer upon delivery. Risk of loss or damage to the Goods shall pass to Buyer upon acceptance.6. Warranties: Seller warrants that the Goods shall be free from defects in materials and workmanship for a period of [Warranty Period] from the date of delivery. Seller's sole liability under this warranty shall be to repair or replace any defective Goods.7. Limitation of Liability: In no event shall Seller be liable for any consequential, incidental, or special damages arising out ofor in connection with this Contract, even if Seller has been advised of the possibility of such damages.8. Governing Law: This Contract shall be governed by and construed in accordance with the laws of [State/Country].9. Entire Agreement: This Contract contains the entire agreement between the parties with respect to the sale of the Goods and supersedes all prior and contemporaneous agreements and understandings, whether written or oral.IN WITNESS WHEREOF, the parties hereto have executed this Contract as of the date first above written.Seller: ______________________ Buyer: ______________________[Signature] [Signature][Printed Name] [Printed Name][Date] [Date]篇5Sales ContractParties:Seller: [Name of Seller]Address: [Seller’s Address]Phone Number: [Seller’s Phone Number]Email: [Seller’s Email Address]Buyer: [Name of Buyer]Address: [Buyer’s Address]Phone Number: [Buyer’s Phone Number]Email: [Buyer’s Email Address]Date:This sales contract is entered into on [Date].Details of the Sale:The Seller agrees to sell the following goods to the Buyer: - Description of Goods:- Quantity:- Price:- Delivery Date:- Payment Terms:Delivery:The Seller agrees to deliver the goods to the Buyer on or before the agreed-upon delivery date. The Buyer agrees to accept the goods upon delivery.Payment:The Buyer agrees to pay the Seller the agreed-upon price for the goods. Payment shall be made in [Currency] and in [Payment Method].Warranties:The Seller warrants that the goods are of satisfactory quality and fit for the purpose for which they are intended. The Seller also warrants that the goods will be delivered free from any defects.Governing Law:This sales contract shall be governed by the laws of [Country] and any disputes arising from this contract shall be resolved in [City], [Country].Signatures:Seller: ________________________ Date: _____________Buyer: ________________________ Date: _____________This sales contract represents the entire agreement between the Seller and the Buyer and supersedes any previous agreements or arrangements.。

销售合同英语翻译3篇

销售合同英语翻译3篇篇1SALES CONTRACTArticle 1: CommodityThe Seller shall sell and the Buyer shall purchase the following commodity: [在此处详细列出销售商品的名称、规格、数量、质量等详细信息]。

Article 2: Origin of the GoodsThe goods to be delivered under this Contract shall be manufactured at [商品生产地].Article 3: Price & Terms of PaymentThe Price of the goods shall be [具体金额] USD ONLY. The payment terms are as follows: [详细列出付款方式、付款期限等条款]。

Article 4: DeliveryThe Seller shall deliver the goods within the time as stipulated in the Contract. The time of delivery shall be regarded as concluded. [详细列出交货期限、交货地点、运输方式等条款]。

Article 5: Inspection and ClaimInspection: The Buyer shall have the right to inspect and/or have a third party approved by the Seller inspect the goods prior to delivery to ensure conformity with the Contract specifications. [详细列出检验条款]。

英文版销售合同范本8篇

英文版销售合同范本8篇篇1SALES CONTRACTThis Sales Contract is made on [Date], between [Seller Name], a company duly organized and operating under the laws of [Seller Country], hereinafter referred to as "Seller" and [Buyer Name], a company duly organized and operating under the laws of [Buyer Country], hereinafter referred to as "Buyer".1. Scope of SupplyThe Seller agrees to sell and the Buyer agrees to purchase the products listed in Annex A, attached hereto, which shall be a part of this Contract. The specifications, quality, quantity, and other related details of the products are specified in Annex A.2. Price and Payment2.1 The total price for the products listed in Annex A shall be [Total Price] USD, which shall be paid by the Buyer to the Seller.2.2 Payment shall be made in USD via the method agreed by both parties, either wire transfer or other agreed means.2.3 The Buyer shall make the payment within [Payment Days] days from the date of signing this Contract.3. Delivery and Shipping3.1 The Seller shall deliver the products to the shipping port specified by the Buyer within [Delivery Days] days from the date of signing this Contract.3.2 Shipping costs shall be borne by the Buyer unless otherwise agreed by both parties.4. Quality AssuranceThe Seller guarantees that all products are in conformity with the specifications mentioned in Annex A and comply with international quality standards. The Seller shall provide necessary quality documents and certificates to the Buyer upon request.5. Warranty and售后支持The Seller shall provide a warranty period of [Warranty Period] months from the date of delivery for any defects in material or workmanship found in the products. During this period, the Seller shall replace or repair any defective products atits own cost. After the warranty period, the Seller shall provide technical support and maintenance services upon request.6. Contract Modification and Termination6.1 This Contract may be modified only by a written agreement signed by both parties.6.2 In case of any breach of Contract by either party, the other party may terminate this Contract with immediate effect upon notice to the default party.7. Law and JurisdictionThis Contract shall be governed by and construed in accordance with the laws of [Country]. Any disputes arising out of or in connection with this Contract shall be settled through friendly negotiation. If no settlement can be reached, either party may submit such disputes to the courts located in [Country/City].8. Miscellaneous8.1 All communications and notices related to this Contract shall be made in English.8.2 This Contract constitutes the entire understanding between the Seller and the Buyer, and no modification oramendment shall be made to this Contract except in writing and signed by both parties.8.3 This Contract is in duplicate, with each party holding one original copy. Each copy is equally valid and shall be binding on both parties.In conclusion, upon signing this Contract, both parties agree to its terms and conditions, and are fully bound by its provisions.Seller:Name: ________________________Address: ________________________Date: ________________Signature: ________________________Buyer:Name: ________________________Address: ________________________Date: ________________Signature: ________________________ANNEX A - PRODUCT LIST AND SPECIFICATIONS (To be attached separately)Please note that this Sales Contract template is for reference purposes only and may need to be customized based on specific business requirements and legal considerations. It is advisable to have a professional legal advisor review any contract before its execution.篇2Sales ContractThis Sales Contract is made on [Date] by and between [Seller's Name], a legal entity registered in [Seller's Country], with its registered office at [Seller's Address] (hereinafter referred to as "Seller"), and [Buyer's Name], a legal entity registered in [Buyer's Country], with its registered office at [Buyer's Address] (hereinafter referred to as "Buyer").Preamble:The Seller and the Buyer, through mutual understanding and negotiation, agree to conclude this contract for the sale ofproducts mentioned below. Both parties have verified the authenticity, legality, and conformity of the products, terms, conditions, and documents attached to this contract.Article 1: Contract Scope1.1 The Seller agrees to sell and the Buyer agrees to purchase the products listed in Annex A, which forms an integral part of this contract.1.2 The items, specifications, quantity, and unit prices of the products shall be as stated in Annex A.Article 2: Terms of Payment2.1 The payment terms shall be as agreed upon by both parties and stated in Annex B, which forms an integral part of this contract.2.2 Any changes to the payment terms must be agreed upon by both parties in writing.Article 3: Delivery and Inspection3.1 The Seller shall ensure timely delivery of the products in accordance with the terms agreed upon by both parties.3.2 The Buyer shall inspect the products immediately upon receipt and notify the Seller of any discrepancies within a reasonable period of time.Article 4: Warranty and Liability4.1 The Seller guarantees that the products are free from defects in material and workmanship and conform to the specifications mentioned in Annex A.4.2 If any defect is found in the products, the Seller shall, at its option, replace or repair them, free of charge, without any delay.Article 5: Force Majeure5.1 If either party is prevented from fulfilling its contractual obligations due to force majeure events, it shall notify the other party immediately and provide necessary evidence.5.2 The affected party shall strive to overcome the force majeure situation and resume performance as soon as possible.Article 6: Termination6.1 This contract shall be terminated only by mutual agreement in writing or in accordance with the applicable laws.6.2 In case of breach of any term of this contract by either party, the other party may terminate this contract by giving a written notice to that effect.Article 7: Miscellanea7.1 This contract constitutes the entire agreement between the Seller and the Buyer and no modification shall be made except in writing and signed by both parties.7.2 This contract is made in duplicate, one for each party, with equal legal effect.7.3 Any disputes arising out of or in connection with this contract shall be settled through friendly negotiation between both parties. If no settlement can be reached, either party may submit the dispute to [Arbitration Institution] for arbitration in accordance with its rules.7.4 This contract is governed by the laws of [Applicable Country].篇3SALES CONTRACTThis Sales Contract (hereinafter referred to as the "Contract") is made and executed on [Date] by and between [Seller's Name] (hereinafter referred to as the "Seller"), and [Buyer's Name] (hereinafter referred to as the "Buyer").Article 1: Identification of the PartiesThe Seller and the Buyer hereby agree to the terms and conditions stated below.Article 2: Product Description2.1 The Product to be sold is described in detail in Annex A, including its specifications, quality standards, and packaging requirements.Article 3: Price and Payment3.1 The price of the Product shall be as stated in Annex B. The Price includes all costs associated with the Product, including taxes, duties, and other applicable charges.3.2 Payment shall be made in full upon receipt of the Product, through the means specified in Annex C.Article 4: Delivery4.1 Delivery shall be made within the timeframe specified in Annex D.4.2 The Seller shall ensure that the Product is properly packaged and labeled for safe transportation to the Buyer.Article 5: Quality Assurance5.1 The Seller shall ensure that the Product meets the specifications and quality standards set out in Annex A.5.2 If the Buyer finds any defects in the Product, the Seller shall promptly replace or repair the Product, at no additional cost to the Buyer.Article 6: Warranty and Liabilities6.1 The Seller provides a warranty for the Product as specified in Annex E.6.2 In case of any claim by the Buyer related to the Product, the Seller shall be liable for any losses incurred by the Buyer, up to the value of the Product.Article 7: Force Majeure7.1 Neither party shall be liable for failure to perform due to force majeure events, such as natural disasters, wars, riots, or government actions, provided that such party promptly notifies the other party of such events.Article 8: Termination8.1 This Contract may be terminated by either party in the event of a breach by the other party of its contractual obligations, provided that such breach is not cured within a reasonable period of time.Article 9: Dispute Resolution9.1 Any disputes arising out of or in connection with this Contract shall be resolved through友好协商(amicable negotiation). If no settlement can be reached, either party may submit the dispute to [arbitration institution or court] for resolution.篇4Sales ContractThis Sales Contract is made on [Date] by and between [Seller's Name], with its principal place of business located at [Seller's Address] (hereinafter referred to as "Seller"), and [Buyer's Name], with its principal place of business located at [Buyer's Address] (hereinafter referred to as "Buyer").1. Scope of Contract(a) The Seller agrees to sell and the Buyer agrees to purchase the under mentioned goods/products, details of which are given in the Annexure A attached hereto and made a part of this Contract.(b) The quantity, quality, specifications, packing, and other relevant terms of the goods/products to be sold shall be clearly stated in Annexure A. The Seller guarantees the accuracy of the same.2. Price and Payment Terms(a) The total contract price for the goods/products mentioned in Annexure A shall be [Contract Price]. The prices are fixed and firm.(b) Payment terms: The Buyer shall make payment through [Payment Method] to the Seller's account within [Payment Timeframe] after the date of this Contract.3. Delivery and Shipping(a) The Seller shall arrange for delivery of thegoods/products to the port specified by the Buyer within [Delivery Timeframe].(b) Shipping documents shall be issued by the Seller and delivered to the Buyer in a timely manner to ensure smooth shipping.4. Quality Assurance and Inspection(a) The Seller guarantees that the goods/products shall be new and of the quality and specifications stipulated in Annexure A.(b) The Buyer has the right to conduct inspections during production and upon receipt of the goods/products to ensure conformity with the contract specifications.5. Risk and Ownership TransferRisk of loss or damage to the goods/products passes to the Buyer upon delivery to the port specified by the Buyer. Ownership of the goods/products shall transfer to the Buyer upon full payment by the Buyer.6. Force MajeureIn case of any delay or failure in performance due to causes beyond the control of either party, such as war, riots, natural disasters, or government intervention, the affected party shall immediately notify the other party in writing. The affected partyshall use reasonable efforts to mitigate the consequences of such force majeure event.7. Warranty and Claims(a) The Seller shall be responsible for any defects in material or workmanship in the goods/products for a period of [Warranty Period] from the date of delivery to the Buyer. During this period, any defects shall be rectified by the Seller at its cost.(b) If any claims are to be made by the Buyer, they must be submitted in writing within [Claim Period] of receipt of the goods/products. Failure to do so shall render claims invalid.8. ConfidentialityBoth parties shall maintain confidentiality of all information related to this contract that is not intended for public disclosure.9. TerminationThis Contract may be terminated by either party in case of a breach by the other party that is not cured within a reasonable period of time. Termination shall be effected by written notice to the other party.10. General Terms(a) This Contract constitutes the entire agreement between the parties and no modifications shall be made unless agreed to by both parties in writing.(b) Any disputes arising out of or in connection with this Contract shall be settled through friendly negotiation between both parties. If no settlement can be reached, either party may submit such disputes to [Dispute Resolution Agency] for arbitration.(c) This Contract shall be governed by and construed in accordance with the laws of [Applicable Law Jurisdiction].(d) This Contract is made in [Number of Languages] originals, each being equally authentic.(e) This Contract becomes effective as of the date stated at the beginning of this Contract and shall continue in full force and effect for a period of [Contract Duration].The parties have signed this Contract in [Signature Place] on the date stated at the beginning of this Contract.Seller:Name:Title:Date:Signature:Buyer:Name:Title:Date:Signature:ANNEXURE A - PRODUCTS AND SPECIFICATIONS [Please insert detailed list of products, specifications, quantity, quality, etc.] [This space left intentionally blank.] [Insert additional annexes if necessary.] [Insert company logos or other identifying marks if desired.]篇5Sales ContractThis Sales Contract is made on [Date] by and between [Seller's Full Name] (hereinafter referred to as "Seller"), and [Buyer's Full Name] (hereinafter referred to as "Buyer").Article 1: Description of GoodsThe Seller agrees to sell and the Buyer agrees to purchase the following goods: [Description of goods, including product name, quantity, specifications, and any other relevant details].Article 2: Price and PaymentThe total price for the goods shall be [Total Price in figures and currency]. Payment shall be made through [Payment method/s (e.g., wire transfer, credit card, etc.)]. The Buyer shall make the payment within [Time frame for payment (e.g., 30 days from date of signing this contract)].Article 3: DeliveryThe Seller shall deliver the goods to the Buyer at the following address: [Buyer's shipping address]. The delivery shall be completed within [Time frame for delivery].Article 4: Quality and InspectionThe Seller guarantees that the goods shall be of good quality and shall comply with the specifications mentioned in Article 1.The Buyer shall have the right to inspect the goods upon receipt. If any defects are found, the Buyer shall notify the Seller immediately.Article 5: Warranty and售后支持The Seller shall provide a warranty for the goods as follows: [Details of warranty period, terms and conditions]. The Seller shall also provide necessary after-sales support to the Buyer as needed.Article 6: Risks and LiabilityRisk of loss or damage to the goods shall pass to the Buyer upon delivery. The Seller shall be liable for any damage to the goods caused during transportation. However, if the damage is caused due to force majeure events (e.g., natural disasters), then the Seller shall not be liable.Article 7: TerminationThis Contract may be terminated by either party in case of breach of any term or condition by the other party. The party seeking termination shall provide a written notice to the other party specifying the reasons for termination.Article 8: Disputes and GrievancesAny disputes arising out of or in connection with this Contract shall be settled through friendly negotiations between the parties. If no settlement is reached, the dispute shall be referred to [Mediation/Arbitration institution or court of law].Article 9: Force MajeureNeither party shall be liable for failure to perform its obligations under this Contract due to force majeure events (e.g., natural disasters, wars, riots, etc.). The affected party shall provide timely notice to the other party regarding such events.Article 10: General TermsThis Contract constitutes the entire agreement between the parties and no modifications shall be made except by written agreement signed by both parties. This Contract is governed by the laws of [Country/State]. The original Contract in English shall be equally valid as any translated version. Any notices required under this Contract shall be in writing and sent to the addresses specified by the parties.In witness whereof, the parties have signed this Contract in duplicate, each party retaining one copy.Seller: _________________________ (Signature)Date: _________________________ (Date)Buyer: _________________________ (Signature)Date: _________________________ (Date)(Note: This is a template and should be customized according to specific requirements and circumstances.)篇6Sales ContractThis Sales Contract (hereinafter referred to as the "Contract") is made and entered into by and between [Buyer Name], whose registered office is located at [Buyer Address] (hereinafter referred to as the "Buyer"), and [Seller Name], whose registered office is located at [Seller Address] (hereinafter referred to as the "Seller").Preamble:After friendly negotiation and mutual understanding of the terms and conditions, the Buyer agrees to purchase from the Seller, and the Seller agrees to sell to the Buyer, the products specified in this Contract.Article 1: Scope of SupplyThe Seller agrees to sell and the Buyer agrees to purchase the under-mentioned commodity:[Product Description, Quantity, Quality, Specifications, Packaging, etc.]Article 2: Price and Payment2.1 The total contract price for the goods mentioned in Article 1 shall be [Price Amount].2.2 Payment shall be made by [Payment Method] through [Bank Name] within [Days/Weeks/Months] after the date of this Contract.Article 3: Delivery and Shipment3.1 The Seller shall deliver the goods within [Delivery Period] after receiving the order confirmation from the Buyer.3.2 The Seller shall inform the Buyer of the estimated date of shipment in good time before the shipment. The Seller shall ensure that the goods are shipped within the time as stipulated in this Contract. In case of force majeure, the Seller shall immediately notify the Buyer in writing of any delay in delivery.Article 4: Quality Inspection and Warranty4.1 The Seller shall ensure that all goods are of the quality, specifications and quantity agreed in this Contract. Any discrepancies must be promptly reported to the Buyer in writing.4.2 The Seller guarantees that the goods are free from any defects in material and workmanship for a period of [Warranty Period] from the date of arrival at the port of destination specified in this Contract. During this period, the Seller shall make up any defects in quality or quantity free of charge.Article 5: Risk and Insurance5.1 Risk of loss or damage to the goods passes to the Buyer upon delivery on board the vessel at the port of shipment specified in this Contract. Prior to that point, all risks shall be borne by the Seller.此外，合同还考虑了可能出现的法律争议问题，并为此制定了相应的解决方案。

1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。

YOUR LOGO
销售合同英语翻译范本正式版
After The Contract Is Signed, There Will Be Legal Reliance And Binding On All Parties. And During The Period Of Cooperation, There Are Laws To Follow And Evidence To Find
专业合同范本系列，下载即可用
销售合同英语翻译范本正式版
使用说明：当事人在信任或者不信任的状态下,使用合同文本签订完毕，就有了法律依靠,对当事人多方皆有约束力。

且在履行合作期间,有法可依,有据可寻，材料内容可根据实际情况作相应修改，请在使用时认真阅读。

售货合同
SALESCONTRACT合同编号：
签订地点：
签订日期：
Date：买方：
卖方：
双方同意按下列条款由买方售出下列商品：
(1)商品名称、规格及包装
(1)NameofCommodity，SpecificationsandPacking(2)数量
(3)单价
(4)总值
(4)TotalValue(装运数量允许有%的增减)
(ShipmentQuantity%moreorlessallowed)(5)装运期限：
(6)装运口岸：
(7)目的口岸：
(8)保险;由方负责，按本合同总值110%投保_____险。

(9)付款：凭保兑的、不可撤销的、可转让的、可分割的即期有电报套汇条款/见票/出票____天期付款信用证，信用证以_____为受益人并允许分批装运和转船。

该信用证必须在______
前开到卖方，信用证的有效期应为上述装船期后第15天，在中国______到期，否则卖方有权取消本售货合约，不另行通知，并保留因此而发生的一切损失的索赔权。

(10)商品检验：以中国________所签发的品质/数量/重量/包装/卫生检验合格证书作为卖方的交货依据。

(11)装运唛头：
其他条款：
1.异议：品质异议须于货到目的口岸之日起30天内提出，数量异议须于货到目的口岸之日起15天内提出，但均须提供经卖方同意的公证行的检验证明。

如责任属于卖方者，卖方于收到异议20天内答复买方并提出处理意见。

2.信用证内应明确规定卖方有权可多装或少装所注明的百分数，并按实际装运数量议付。

(信用证之金额按本售货合约金额增加相应的百分数。

)
3.信用证内容须严格符合本售货合约的规定，否则修改信用证的费用由买方负担，卖方并不负因修改信用证而延误装运的责任，并保留因此而发生的一切损失的索赔权。

4.除经约定保险归买方投保者外，由卖方向中国的保险公司投保。

如买方需增加保险额及/或需加保其他险，可于装船前提出，经卖方同意后代为投保，其费用由买方负担。

5.因人力不可抗拒事故使卖方不能在本售货合约规定期限内交货或不能交货，卖方不负责任，但是卖方必须立即以电报
通知买方。

如果买方提出要求，卖方应以挂号函向买方提供由中国国际贸易促进委员会或有关机构出具的证明，证明事故的存在。

买方不能领到进口许可证，不能被认为系属人力不可抗拒范围。

6.仲裁：凡因执行本合约或有关本合约所发生的一切争执，双方应以友好方式协商解决;如果协商不能解决，应提交中国国际经济贸易仲裁委员会，根据该会的仲裁规则进行仲裁。

仲裁裁决是终局的，对双方都有约束力。

7.附加条款(本合同其他条款如与本附加条款有抵触时，以本附加条款为准。

)
卖方(Sellers)买方(Buyers)
可在本位置填写公司名或地址
YOU CAN FILL IN THE COMPANY NAME OR ADDRESS IN THIS POSITION。

销售合同英语翻译范本正式版

英文销售合同模板3篇

英文销售合同模板3篇

关于英文销售合同范本6篇

最新英文销售合同模板6篇

销售合同英文范本5篇

英文销售合同模板5篇

销售合同英语翻译3篇

英文版销售合同范本8篇