TunelabPro使用说明书
Tunelab_pro教程(可编辑)

Tunelab_pro教程(可编辑)安装与注册1.索取注册号:在PC机上运行“算号器”Key Generator,在“用户名”栏填上你的英语(拼音)名字、点击“确定”,这时“序列号”一栏即可出现与你输入名字相配套的“注册号”。
将“名字”和“注册号”用纸笔记录下来备用。
2.安装系统:运行tunelab_pro_setup.exe。
注意装文过程中界面除系统配置文件之外的一些附加文件(很有用的文件)安装路径及目录的提示,若不加更改的话,这些附加文件将会被默认安装到你PC机“我的文档”里。
3.注册:安装完成后,桌面上即有TuneLabPro的快捷方式,点击它、启动该系统。
点击左上第一行菜单栏的Help项,在下拉菜单中先“Enter License Infomation”,在出对话框的上面一行填上你的“名字”,下面一行填上索取到的“注册号”,然后点OK、再点确认,这时tunelab会自动退出,当再次启动系统时你的名字就会显示在主界面右的上角,以示注册成功。
tunelab 界面介绍然后说一下标准界面上所有的显示的意义(红色字体)A:相差显示,如果钢琴发出的声音偏低,则黑色块往左移动。
反之则往右移动B:所调的音的显示,如果你在调C1,则可以通过键入字母c,1,软件就会显示到C1了。
如果是#C1,则按大写C,1以此类推。
往旁边的音移动,可以通过按左右键来切换。
软件也有自动切换功能。
C:精度显示,这是一个白色小色带,如果钢琴的误差在1cent之外,则全白。
如果进入1cent范围之内,则色块会从外向内变灰。
灰色满了,也就是正好到位了。
D:光谱显示,道理同A,中间的红线为基准,左低右高。
一般在调中低音区的时候,看A区比较方便,而在调试最高的那几个音的时候,看D得显示则快捷多了。
校准步骤:首先,你需要有一个可靠的440赫兹的频率发生器(TuneLab使用交流群的“共享”里的‘UFO-频率发生器’即可下载到PC里、打开运行将界面频率值改设为440Hz并使其发响即可使用)。
翻译好的罗氏公司Tunel试剂盒操作说明书

翻译好的罗氏公司T u n e l试剂盒操作说明书SANY标准化小组 #QS8QHH-HHGX8Q8-GNHHJ8-HHMHGN#罗氏(R o c h e)公司T u n e l试剂盒操作说明书(Insitucelldeathdetectionkit-POD法)一、原理:TUNEL(TdT-mediateddUTPnickendlabeling)细胞凋亡检测试剂盒是用来检测组织细胞在凋亡早期过程中细胞核DNA的断裂情况。
其原理是荧光素(fluorescein)标记的dUTP在脱氧核糖核苷酸末端转移酶(TdTEnzyme)的作用下,可以连接到凋亡细胞中断裂DNA的3’-OH末端,并与连接辣根过氧化酶(HRP,horse-radishperoxidase)的荧光素抗体特异性结合,后者又与HRP底物二氨基联苯胺(DAB)反应产生很强的颜色反应(呈深棕色),特异准确地定位正在凋亡的细胞,因而在光学显微镜下即可观察凋亡细胞;由于正常的或正在增殖的细胞几乎没有DNA断裂,因而没有3‘-OH形成,很少能够被染色。
本试剂盒适用于组织样本(石蜡包埋、冰冻和超薄切片)和细胞样本(细胞涂片)在单细胞水平上的凋亡原位检测。
还可应用于抗肿瘤药的药效评价,以及通过双色法确定细胞死亡类型和分化阶段。
二、器材与试剂器材:光学显微镜及其成像系统、小型染色缸、湿盒(塑料饭盒与纱布)、塑料盖玻片或封口膜、吸管、各种规格的加样器及枪头等;试剂:试剂盒含:1号(蓝盖)EnzymeSolution酶溶液:TdT10×、2号(紫盖)LabelSolution标记液:荧光素标记的dUTP1×、3号(棕瓶)Converter-POD:标记荧光素抗体的HRP;自备试剂:PBS、双蒸水、二甲苯、梯度乙醇(100、95、90、80、70%)、DAB工作液(临用前配制,5μl20×DAB+1μL30%H2O2+94μlPBS)、ProteinaseK工作液(10-20μg/mlin10mMTris/HCl,pH7.4-8)或细胞通透液(0.1%TritonX-100溶于0.1%柠檬酸钠,临用前配制)、苏木素或甲基绿、DNase1(3000U/ml–3U/mlin50mMTris-HCl,pH7.5,10mMMgCl2,1mg/mlBSA)等。
Tune 软件操作说明-TSQ Quantum series

1 打开 Tune 软件双击桌面上的图标,打开 Tune 软件;2 Tune 软件界面整体介绍功能快捷图标介绍如下:(1) 开扫描 点击 仪器开始扫描(2) 化合物优化图标 点击 进入化合物优化界面(3) 扫描参数设置图标 点击 设置扫描参数,分为 Full scan、SIM、SRM 三种扫描方式;Full Scan Q1MS 参数设置如下图:Entry Mode 可选择 FM/LM(分别输入扫描范围起止的质荷比)或者 Center Mass(输入 center mass 和 scan width 一般用 20,表示以 center mass 为中心正负 10amu 的扫描范 围) b) Scan Time:扫描时间输入 1s c) Peak Width Q1:选择 0.7 d) Data Processing:选择 Average,输入 10 Full Scan Q3MS 参数设置如下图(具体设置同 Full Scan Q1MS) : a)MS/MS Parent 参数设置如下图:a) Entry Mode 可选择 FM/LM(分别输入扫描范围起止的质荷比)或者 Center Mass(输入 center mass 和 scan width 一般用 20, 表示以 center mass 为中心正负 10amu 的扫描范围) b) Scan Time:扫描时间输入 1 或 0.5s c) Peak Width Q1:选择 0.7 d) Charge State:输入 1e) Product Mass 输入要检测的子离子碎片的质荷比 f) Collision Energy:输入碰撞能量,一般用 25~35 g) Q2 CID Gas:输入 1.5 MS/MS Product 参数设置如下图:a) Entry Mode 可选择 FM/LM(分别输入扫描范围起止的质荷比)或者 Center Mass(输入 center mass 和 scan width 一般用 20, 表示以 center mass 为中心正负 10amu 的扫描范围) b) Scan Time:扫描时间输入 1 或 0.5s c) Peak Width Q1:选择 0.7 d) Charge State/Product Ion:输入 1 e) Parent Mass 输入要检测的母离子的质荷比 f) Collision Energy:输入碰撞能量,一般用 25~35 g) Q2 CID Gas:输入 1.5 h) Energy Ramp:输入 10~15 MS/MS Neutral Loss 参数设置如下图:a) Entry Mode 可选择 FM/LM(分别输入扫描范围起止的质荷比)或者 Center Mass(输入 center mass 和 scan width 一般用 20, 表示以 center mass 为中心正负 10amu 的扫描范围) b) Scan Time:扫描时间输入 1 或 0.5s c) Peak Width Q1:选择 0.7 d) Charge State/Product Ion:输入 1e) Neutral Loss Mass 输入中性丢失的分子量 f) Collision Energy:输入碰撞能量,一般用 25~35 g) Q2 CID Gas:输入 1.5 SIM 参数设置如下图:a) b) c) d) e)Scan Width:输入 2.0 Scan Time:扫描时间输入 1 或 0.5s Peak Width Q1:选择 0.7 Use Tuned Tube Lens Value:打钩 Mass:输入要检测的离子的质荷比SRM 参数设置如下图:a) b) c) d)Scan Width:输入 0.01 Scan Time:扫描时间输入 0.1s Peak Width Q1:选择 0.7 在表格中输入母离子质荷比、子离子质荷比、碰撞能量和 tube lens(4) 质量轴校正图标 (5) 仪器参数诊断图标 (6) TIC 图扫描图标 (7) TIC 图暂停扫描图标 (8) 谱图平均及噪音过滤图标 ,具体设置如下图:average 是指的谱图平均,Chrom Filter 指的是过滤电噪音,这两个参数可都用 10 (9) 谱图采集方式设置 Centriod (10) 正负扫描模式设置 (11) 注射泵开关 点击 打开注射泵,点击菜单栏 Setup 中的 Syringe Pump & Sample Loop 进入流速更改界 分为 Profile 和 Centriod 两种,一般一级用 Profile,二级用面,Flow Rate:5ul/min;Syringe Type:Hamliton;Volume:500ul。
TunelabPro使用说明书

初次使用此软件的朋友,看了猫版的介绍,再加上这个指南文件,上手应当很轻松了。
献给部分英文比我还糟的朋友,呵呵Using this tutorial 如何使用此指南This tutorial is meant to be used as a step-by—step guide to certain operations in TuneLab Pro。
本指南将一步一步的指导您在TuneLab Pro中的操作。
Many of these operations involve the keyboard。
有相当一部分操作涉及到键盘的使用。
However, the keys that you press when this tutorial is displayed do not always go to TuneLab Pro.然而,当此帮助页面显示时,您按下键盘键并不总是能够回到TuneLab Pro操作界面。
In fact, every time you call this tutorial and every time you click in it,the tutorial acquire s the ”focus" of the keyboard.实际上,每当您查看本指南或者在本指南显示的区域内操作鼠标时,焦点总是被当前的指南页面获得的. To make the keys go to TuneLa b Pro,you need to give the focus back to TuneLab Pro. 要想使用键盘来控制Tune Lab Pro的操作,您需要使焦点回到TuneLab Pro界面中. You can do that by clicking anywhere inside the TuneLab Pro window. 您可使用鼠标点击TuneLab Pro窗口来实现。
威尔逊 Baiardo Tune Pro 球拍调谐器操作手册说明书

BAIARDO TUNE PRO操作手册感谢购买 WILSON BAIARDO TUNE PRO 。
Baiardo Tune Pro 是一款突破性的球拍诊断器,具有尖端技术、简洁设计和超高效率,是适用于全球各种类型球拍的调谐器。
主要功能包括:• 可测量重量、平衡、挥重、杆身弯曲、线床硬度、拍面挠度、水平弯曲和垂直弯曲,涵盖 7 项球拍运动: 网球、羽毛球、壁球、短柄墙球、笼式网球、匹克球和平台网球• 可同时测量重量和平衡• 首台可测量垂直弯曲的机器• 使用预测软件精确进行球拍定制• 易于校准,确保准确性和可重复性• 可保存多达 6 项球拍配置资料本手册提供了有关组装和使用 Baiardo Tune Pro 机器的基本信息。
要了解更多信息,请访问 /baiardo 。
谨上Baiardo 开发团队•BAIARDO TUNE PRO警告和注意事项 (4)组装机器 (4)零部件说明 (5)启动 (6)启动机器 (6)用户界面 (6)切换语言 (7)启动诊断 (7)基本操作提醒 (8)密码 (8)选择新密码 (8)基础构件 (9)执行器头部 (9)执行器端头 (9)称重传感器 (10)支杆 (10)手柄限制装置 (11)拍柄对齐凸轮 (12)挥重夹具 (12)垂直弯曲固定器 (13)匹克球拍面挠度固定器 (13)羽毛球杆身弯曲固定器 (13)操作机器 (14)常规触摸屏操作 (14)选择运动 (15)设置测试 (15)重量和平衡 (16)挥重测试 (17)线床硬度 (18)水平弯曲测试 (19)垂直弯曲测试 (20)羽毛球杆身弯曲测试 (21)匹克球拍面挠度 (22)测试说明 (23)保存测试 (23)调谐模式 (24)什么是调谐模式? (24)设置调谐模式 (24)使用实时调谐模式 (25)使用计算模式 (26)校准 (27)重量和平衡 (27)校准:挥重 (28)更换装置进行挥重校准 (28)校准:RA (29)维修、维护和故障排除 (30)保修须知 (31)保修范围 (31)获取保修服务和零部件 (31)BAIARDO TUNE PRO 产品规格 (32)警告和注意事项请保存此类说明。
Tune软件操作说明-Q-Exactive series

1 打开 Tune 软件 2 界面及图标介绍 界面及图标介绍(1)ON、Standby、Off,启动扫描时选择 On,待机选择是 Standby(2)打开 tune 方法(3) (4)保存 tune 方法 六通阀的切换,只用 a,1 是 waste,2 是 inject(5) (6)质谱注射泵,可以更改流速 三个灯都为绿色是正常状态,第 1 灯:指示仪器通讯是否正常,第 2个灯:指示仪器硬件状态是否正常,第 3 个灯:指示仪器的性能状态是否正常。
典型的变黄 原因有:校正过期。
建议重新校正,校正完成之后可恢复绿色。
将鼠标放在上述的灯上即可 显示变黄的信息提示。
3Instrument control 各项参数3.1 Scan parameters(1) Scan type:分为 Full MS-SIM 和 AIF-MS/MS; Full MS:一级全扫,要求 Last mass≤15*first mass SIM:当 full mass 的扫描范围小于 50 个质量数时,自动变为 SIM。
AIF:所有的离子全部碎裂,没有母离子的选择性,现在软件无法识别二级子离子是由哪个 母离子产生的,所以暂时不用这种方法。
MS/MS:设定 center/width,或者 scan range,这里设置的是母离子的质荷比; (2) Scan range:参考 scan type,scan type 中设置的是 full scan 时,这里设置全扫的质荷 比范围,如果 scan type 中选择的是 MS/MS,此处应设置子离子的扫描范围。
(3) Fragmentation:分为 source CID 和 NCE,一般做 full scan 时此项是关闭状态 Source CID:源内裂解,主要用于打开二聚体等非共价结合的键。
NCE:归一化碰撞能量。
仪器校正后,每个特定质荷比的离子都有一个对应将其打碎的能量 值,做小分子设为 35; (4) Resolution:分辨率代表仪器将不同质量数离子分开的能力,QE 可以达到 14 万,最 低分辨率为 1750。
LogicPro技巧

LogicPro技巧1.导出键盘命令模板假设在自己的工作室里做一个项目,然后又需要到另一个工作室去完成混音工作,工作效率下降了。
但将使用的键盘命令模板导出,然后导入新的机器,能大幅提升工作效率。
只要记得保存替换前的模板,否则它们就再也找不回来了。
2.改变默认插件设置只要将任意一个喜欢的设置保存为名叫“#default”的patch文件就可以了。
现在当每一次载入软件乐器的时候,就会载入这个预置了。
记得备份最初的设置,以防以后可能会用得上。
这样做了以后,应该会节省很大一部分时间。
3.用tremolo实现自动声像变化(auto-pan)logic里并没有自动声像变化(auto-pan),但是可以将捆绑的tremolo插件转变为一个很棒的同步声像效果器。
只要确保相位(phase)设定在180度,对称值(symmetry)设定在50%,会发现马上就得到了自动声像变化的效果了。
现在再可以调下别的设置,看看有什么其他的变化。
4.简单易用的采样器使用logic里以loop为基础的工具时,最有用的一点就是能很快地切开loop,然后将结果传输给exs24采样器。
结果通常具有很强的回放能力,比如支持通过midi文件来回放其原有的形式。
要完成这个过程,只要在编配页面里,选择“音频(audio)”菜单,点击“将片段转换成新的采样轨道(convert regions to new sampler track)”。
它会帮助完成转换和其他所有的工作。
5.用颜色来编辑将所有的片段,轨道都用颜色编码。
做一个颜色编码的系统,在大脑里对它们进行分类,然后记住。
很快,当记住它们后,就有能力在看一眼的情况下知道某个工程里进行着什么样的项目。
6.链接利用插件中链接(link)按钮的优势可以节省屏幕的空间和防止视线的混乱。
启动链接(link)功能,所有的插件都会在同一个窗口中打开。
这个功能对于那些使用笔记本,屏幕空间很宝贵的人们来说,是非常实用的。
ClearOne COLLABORATE Versa Pro 50 产品说明书

Great ideas need to be see n - and heard! TMProfessional, crystal-clear audio Includes ClearOne’s CONVERGE®Huddle CTH audioDSP mixer and Ceiling Mic Array for crystal-clear voice clarity and an unrivaled audio experience.Enhances Any Cloud-based AppAdd pro-quality audio and HD video to your app, such as COLLABORATE Space, Microsoft Teams, Zoom, WebEx, and GoToMeeting.Improve the BYOD experience in huddle spaces and small conference rooms by adding professional quality audio and video.COLLABORATE ® Versa TMPro 50APPLICATIONS• BYOD video conferencing • BYOD audio conferencing • In-room presentationWORKSPACES • Huddle spaces• Small meeting rooms • Executive offices> One CONVERGE® Huddle CTH audio DSP mixer for a professional audio experience > One Ceiling Microphone Array with360-degree coverage reducing noise and reverberation.> Clutter-free with optional CONVERGE Huddle VESA mount>One UNITE® 50 4K ultra-wide 120-degree ePTZ camera with 1080p30, and 3x digital zoom to capture all participants in a huddle space or small room.> Now, configure Versa Pro CT directly through the USB port, or use network Ethernet jack.> Monitor, control, and audit Versa Pro CT with CONVERGENCE TM unified AV network management software.> Complimentary 90-day trial ofCOLLABORATE Space, our powerful cloud-based video collaboration application with a full suite of audio, video, and meeting tools in a persistent space.Ceiling LoudspeakersCOLLABORATE ®Versa Pro 50Other product names and logos may be registered trademarks of their respective owners who do not necessarily endorse ClearOne or ClearOne’s products. All rights reserved. Information in this document subject to change without notice. DST-0160-001 Rev1.2 20200409 ©2020 ClearOne.SALES An D inq Uiri ESHeadquarters 5225 Wiley Post Way Suite 500Salt Lake City, UT 84116US & Canada Tel: +1.801.975.7200Fax: +1.801.303.5711international Tel: +1.801.975.7200*******************TechSupport Tel: +1.801.974.3760*************************SalesTel: +1.801.975.7200******************Versa Pro 150 using Room PC a display, with optional ClearOne Ceiling Loudspeakers2Other product names and logos may be registered trademarks of their respective owners who do not neces-sarily endorse ClearOne or ClearOne’s products. All rights reserved. Information in this document subject to change without notice. DST-0058-001 Rev2.6 20200617 ©2020 ClearOne.SALES AND INQUIRIESHeadquarters 5225 Wiley Post Way Suite 500Salt Lake City, UT 84116US & Canada Tel: 801.975.7200Fax: 801.303.5711International Tel: +1.801.975.7200*******************Tech Support Tel: 801.974.3760*************************SalesTel: 801.975.7200******************TM。
- 1、下载文档前请自行甄别文档内容的完整性,平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益,请联系客服反馈,我们会尽快为您处理(人工客服工作时间:9:00-18:30)。
初次使用此软件的朋友,看了猫版的介绍,再加上这个指南文件,上手应当很轻松了。
献给部分英文比我还糟的朋友,呵呵Using this tutorial 如何使用此指南This tutorial is meant to be used as a step-by-step guide to certain operations in TuneL ab Pro. 本指南将一步一步的指导您在TuneLab Pro中的操作. Many of these operations i nvolve the keyboard.有相当一部分操作涉及到键盘的使用。
However, the keys that you press when this tutorial is displayed do not always go to TuneLab Pro.然而,当此帮助页面显示时,您按下键盘键并不总是能够回到TuneLab Pro操作界面。
In fact, every time y ou call this tutorial and every time you click in it, the tutorial acquires the "focus" of t he keyboard.实际上,每当您查看本指南或者在本指南显示的区域内操作鼠标时,焦点总是被当前的指南页面获得的。
To make the keys go to TuneLab Pro, you need to give the focus back to TuneLab Pro. 要想使用键盘来控制TuneLab Pro的操作,您需要使焦点回到TuneLab Pro界面中。
You can do that by clicking anywhere inside the TuneLab Pro win dow. 您可使用鼠标点击TuneLab Pro窗口来实现。
Remember to do that whenever the instructions in this tutorial call for using the keyboard.当执行本指南中使用键盘的操作时,记得上述的提示。
The contents list shows the tutorial topics. 目录列出本指导的主题。
Some topics requir e several pages. 部分主题包含了几页的内容。
These topics can be viewed by using the "--Next--" link at the bottom of a topic. 可使用页面底部的NEXT链接来进行翻页查看。
I f this help window gets in the way of some part of the TuneLab Pro screen, then you can click and drag the title bar of the tutorial window to move it out of the way. Yo u can even resize the help window by dragging at the borders.若此帮助窗口遮挡了Tun eLab Pro主窗口,您移动此窗口或拖拽边框改变大小。
Although this tutorial is focused primarily on how to do certain things, you can also fin d out why we do these things.尽管此指南已覆盖了大部分的主要操作内容,您仍可以进一步得到这些内容的解释。
Click on the links in the text that say "(Why)" and learn more about the operation being described.点击文本中的“Why”以得到更多的操作描述。
These topics show only the simplest way to do the operations shown. For more in-dept h coverage of any topic, see the Help Topics in the Help menu in TuneLab Pro.本指南仅指出了所列举操作的最简单的方式,要得到理为详尽的帮助主题,请参阅主程序的帮助菜单。
-----Selecting notes-----选择音uMake sure the keyboard caps lock is off (Why). 确认键盘的caps lock在关闭状态(If y ou select notes by pressing upper case versions of A-G, you will get the sharp version of these notes. To make sure you get the naturals, use only lower case.?如果为大写状态,您会选择带#的音)Press the B key.按B键,Note how the current n ote is now B. 注意当前音显示是B,The octave number after the B remains unchanged. 八度序号数没有变化。
Press the 3 key.按3键,Note how the current note is now B3.注意当前音显示为B3。
uPress the right arrow key several times. 按几下右方向键,Note how the current note goes up one note at a time. 可注意到当前音每次上行一个。
Press the left arrow key. Note how the current note goes down one note at a time.按左方向键,可看到当前音每次下行一个。
uPress the Pg-Up or Pg-Dn keys. Note how the octave number goes up or down one o ctave at a time.八度序数每次上行或下行一个。
uHold the shift key and press the right arrow key to enable automatic note switching (WhyYou enable auto note switching so that you can operate TuneLab Pro without touc hing the computer. 设置为自动切换方式您可以不用接触计算机来操作TuneLab Pro。
Tune Lab Pro listens to the notes you play and when it hears that you are playing the next note in the scale it will automatically switch to that note. TuneLab Pro监听您所弹奏的音,如果它听到您所弹音在下一个音的频率范围,它将自动切换到下一个音。
There are three different versions of auto note switching - auto up, auto down, and auto both. 有三种自动切换方式,自动上,自动下,全自动。
These modes can be enabled by holdin g the shift key and pressing the right arrow, the left arrow, or the left and right arro ws together. 可以按SHIFT+右,左,左右同时来进行切换。
Auto note switching is disabl ed by holding the shift key and pressing the down arrow. 退出自动切换模式只须按SHIF T+下方向键。
You can see the current state of auto note switching by noting which aut o note toolbar buttons are pushed in at the top of the screen. 您可以看到屏幕上端的音切换方式显示工具栏上的按钮呈弹起状态。
).按住SHIFT键按右方向键,设置自动切换方式。
uSelect note B3.选择B3uPlay note C4 on the piano. 弹奏C4,Note how the current note automatically switches to C4.当前设置显示当前音自动切换到C4。
uHold the shift key and press the down arrow key to turn off automatic note switching.按SHIFT+↓关闭自动切换状态。
Tuning with the spectrum display调音的频谱显示uSelect note A4.选择A4uPress the "+" key to select the zoomed-in view of the spectrum display.按+键选择放大查看模式。
uPlay A4 on a piano.弹奏钢琴A4,The spectrum display should show a graph with a p eak somewhere in the middle. 频谱图的曲线中部会出现一个波峰,If the peak is to th e left of the red line then the note on the piano is flat.如果波峰在红线的左侧,钢琴的A4音偏低。
If the peak is to the right of the red line then the note is sharp. 如果在红线右侧,则偏高。