JVC UX-N1中文操作说明书
高清摄像笔录音笔中英文说明书
User Manual Before operating the unit,pleasereadthismanualcarefullyand understandthoroughly. Retain it for future use1 / 152 / 15Product FeaturesSuper image sensor for low illumination video recording. Auto focus, quick light response Full HD 1080P up to 30fps,720P up to 60fps H.264 compressionBuilt-in micro SD card,support up to 32GB Only one button, easy operationultra-integrated pen type design, suitable formeeting recording, evidence recording, andoutdoor sports scenes, etc.Easy download to PC/MAC with USB plugProduct OverviewLens MicrophoneLens Cover SliderReset Hole LED Indicator USB PlugFunction ButtonBasicOperations1.T urning The UnitOn/ Video Recording Press and hold the Function button tillthe blue indicatorturns on,release the button, the green indicator will blink and then turn off, the unitstarts videorecording.Click the Function button again, will stop recording, the blue indicator turns on and the unit ison standby mode.When the video clip lengthis over10 minutes,the unit will save the current clip file, and then restart video recording automatically.Note: Be sure to open the lens cover before recording.2.P hotoShootingEnter Photo Mode:When the unit ison standby mode(the blue indicator keeps on),doubleclick the Function button,the blue and green indicators will blink alternately, the unit entered Photo Mode.3 / 15.Click the Function button once to take a photo, the blue indicator blinks rapidly.Quit the Photo mode:Double click the Function button, the unit will back to Standby Mode, the blue indicator keeps on.3.T urning The Unit OffWhen the unit is on, press and hold the Function button for about 3 seconds,the unit will shut down. Auto power off function:The unit will shut down automatically in following conditions:(1). The battery power is low. The blueindicatorwill blink for seconds, and then the unit will shut down.(2). The memory is full. The blue and greenindicatorswill blinkfor seconds, and then the unit will shut down.(3).If no operation for one minute in Standby Mode, the unit will shut down to save power.4.C harging The Battery4 / 15The unit has an internal, rechargeable battery.The battery can be charged byfollowing ways:1). Plug the unit into your computer USB port.2). Plug the unit to DC5Vbattery charger.During charging, the blue indicator will blink, when the battery power is full, the blue indicator keeps on.5.R eset FunctionWhen the unit works abnormal for illegal operation or other unknown reasons, it needs to bereset.Use a thin stick (e.g. toothpick) to press the Reset button inside the Reset hole. Restart the unit, it will work normally again.6.S etting The UnitPlug the unit into the computer USB port, a new removable disk will appear on the computer screen. Open the removable disk, you will find the file setup.exe under the root directory, double-click the file to run it, following window will appear:5 / 15You can set date/time, frame size, image quality, audiovolume, etc.When thesetting is completed, click the button on the lower left to save the settings.To make the settings take effect, disconnect the unit with computer, and turn the unit on.6 / 157 / 15upgrade and update. Please base on real object.)Caution:Your device is a product of superior design and craftsmanship and should be treated with care. The following suggestions will help you protect your warrantycoverage.Keep the device dry. Precipitation, humidity, and all types of liquids or moisturecan contain minerals that will corrode electronic circuits. If your device doesget wet,allow it to dry completely.The unit may become fairly hot during recording –this is normal. To ensure proper cooling do not block the flow of air to the cover of the unit.Do not drop, knock, or shake the device. Rough handling can break internalcircuit boards and fine mechanics.Do not use harsh chemicals, cleaning solvents, or strong detergents to clean thedevice.*Please follow State′s law. Do not use the unit8 / 15illegally.使用说明书使用时请详细阅读本说明书，以免因不熟悉或不对操作，导致未达成使用目的。
JVC摄像机使用说明书
架安装应按制造商的说明进行，并使用制造商认可的安装套件。移动
本设备与推车的组合体时请务必小心。
急停、猛推和高低不平的地面可能造成本设备和推车组合体倾覆。 8. 机壳侧面及后部或底部的槽孔和开口用于通风，以保证本设备的正常
S3125A
操作并防止过热，切勿堵塞或覆盖这些开口。切勿将本设备置于床、
沙发、地毯或其它类似表面上，以免堵塞这些开口。
警告∶ 为避免火灾及电击，请勿使此设备遭 受雨淋或受潮。
4
承蒙惠购本产品。 （本说明书用于 TK-C1480BEC 和 TK－C1481BEC） 使用本机之前，请仔细阅读本使用说明书以保证其发挥最佳性能。
目录
介绍 功能 ............................................................................................................................................ 6 操作注意事项 ............................................................................................................................ 7 控制器、插座和指示灯 ............................................................................................................. 8
18. 如果需要更换部件，请确认维修人员使用了制造商指定的、性能参数与原来部件相同的新 部件。未经授权的替代品可能引起火灾、电击或其它事故。
录像笔使用专项说明书中文
总览Structure:1、开关2、摄像头3、麦克风4、批示灯5、复位孔6、USB7、笔头1, button 2, camera, 3 microphone 4, indicator light5, reset 6, USB 7, pen head产品简介：1．世界上最小旳微型DVR，隐藏在钢笔里面！带有录像录声音旳微型DVR，是世界上第一台钢笔型带录像录声音旳微型DVR2．高敏捷度旳麦克风，在15平方米之内都可清晰旳把声音录下来；高清晰旳摄像效果，为公安部门、法庭取证等提供有力旳证据。
Brief Introduction:1. Hidden inside a pen, it is the world's smallest micro-DVR as well as the world's first pen-based video recorder with voice.2. It features with high sensitivity of the microphone: within 15 square meters, the clear voice can be recorded. With high-definition camera, it is helpful to provide strong evidence for the public security departments and court.3．精美旳外观，流畅旳圆珠笔书写功能，可替代旳原则笔芯，耐用环保。
4．合用于任何带USB接口旳计算机及其他电子设备。
5．USB2.0原则接口，无需驱动器，无需外接电源。
6．支持WINDOWS98/98SE/ME//XP/MAS OS/ LINUX并自动辨认操作系统，安装相应旳驱动程序，无需手动安装(WINDOWS98除外)。
7．录象格式为CIF 旳352*288旳AVI格式8．数据读写速度快：900K/700K字节/秒（与主机速度有关）3. Exquisite looking, smooth ball-point pen to write. The replacable cartridge isdurable and environment-friendly.4. Apply to any computer with USB and other electronic equipment.5. USB2.0 standard interface. No need drive or external power supply.6. Support WINDOWS 98/98SE/ME//XP/MAS OS / LINUX operating systems. Itmay automatic identify the system to install the driver. (Excpet WINDOWS 98 ).7. 352 x288 CIF file in A VI format8. High reading & writing speed: 900 K/700K bytes / sec (depends on theconnected computer)Applications:A. Police to take recordB. Lawyer to take evidenceC. Reporter to record in the interviewD. stealth monitorWarning: It is forbidden to use for illegal purpose.录像笔应用场合：A.公安执法过程记录B.律师取证C.记者特殊场合采访D.隐形监控录像注：严禁用于（偷拍等）非法目旳。
jvc说明书
ENGLISHGR-D290GR-D270L YT1383-001AENTERMS Dear Customer,Thank you for purchasing this digital video camera. Before use, please read the safety information and precautions contained in the pages 3–4 and 10 to ensure safe use of this product.Please visit our Homepage on the World Wide Web for Digital Video Camera:For Accessories :INSTRUCTIONSDIGITAL VIDEO CAMERAGETTING STARTED6VIDEO RECORDING & PLAYBACK18DIGITAL STILL CAMERA (D.S.C.) RECORDING & PLAYBACK25ADVANCED FEATURES31REFERENCES47To deactivate the demonstration, set “DEMO MODE” to “OFF”. (੬pg.31,33)Back cover4 ENDo not point the lens or the viewfinder directly into the sun. This can cause eye injuries, as well as lead to the malfunctioning of internal circuitry. There is also a risk of fire or electric shock. CAUTION!The following notes concern possible physical damage to the camcorder and to the user.When carrying, be sure to always securely attach and use the provided strap. Carrying or holding the camcorder by the viewfinder and/or the LCD monitor can result in dropping the unit, or in a malfunction.Take care not to get your finger caught in the cassette holder cover. Do not let children operate the camcorder, as they are particularly susceptible to this type of injury.Do not use a tripod on unsteady or unlevel surfaces. It could tip over, causing serious damage to the camcorder.CAUTION!Connecting cables (Audio/Video, S-Video, etc.) to the camcorder and leaving it on top of the TV is not recommended, as tripping on the cables will cause the camcorder to fall, resulting in damage.EN5CONTENTSGETTING STARTED 6Index.................................................................6Provided Accessories.....................................11Power..............................................................13Operation Mode..............................................14Date/Time Settings.........................................15Grip Adjustment..............................................15Viewfinder Adjustment....................................16Brightness Adjustment Of The Display...........16Tripod Mounting..............................................16Loading/Unloading A Cassette.......................16Loading/Unloading A Memory Card. (17)VIDEO RECORDING & PLAYBACK 18VIDEO RECORDING (18)Basic Recording..............................................18Tape Remaining Time................................18LCD Monitor And Viewfinder......................18Zooming......................................................19Journalistic Shooting ..................................19Time Code..................................................19Quick Review..............................................20Recording From The Middle Of A Tape (20)VIDEO PLAYBACK (20)Normal Playback.............................................20Still Playback..............................................20Shuttle Search............................................21Blank Search..............................................21Connections To A TV Or VCR........................22Playback Using The Remote Control.. (23)DIGITAL STILL CAMERA (D.S.C.) RECORDING & PLAYBACK 25D.S.C. RECORDING............................................25Basic Shooting (D.S.C. Snapshot)..................25Interval Shooting.........................................25D.S.C. PLAYBACK. (26)Normal Playback Of Images...........................26Auto Playback Of Images...............................27Index Playback Of Files..................................27Removing On-Screen Display (27)ADDITIONAL FEATURES FOR D.S.C (28)Dubbing Still Images Recorded On A Tape To A Memory Card..............................................28Resetting The File Name................................28Protecting Files...............................................28Deleting Files..................................................29Setting Print Information (DPOF Setting)........29Initialising A Memory Card (30)ADVANCED FEATURES 31MENUS FOR DETAILED ADJUSTMENT (31)Changing The Menu Settings.........................31Recording Menus............................................32Playback Menus (35)FEATURES FOR RECORDING (37)LED Light........................................................37Live Slow........................................................375-Second Recording.......................................37Night-Scope....................................................38Snapshot (For Video Recording)....................38Manual Focus.................................................38Exposure Control............................................39Iris Lock..........................................................39Backlight Compensation.................................40Spot Exposure Control....................................40White Balance Adjustment..............................40Manual White Balance Adjustment.................41Wipe Or Fader Effects....................................41Program AE With Special Effects. (42)EDITING (43)Dubbing To Or From A VCR...........................43Dubbing To Or From A Video Unit Equipped With A DV Connector (Digital Dubbing)..............44Connection To A Personal Computer.............45Audio Dubbing................................................46Insert Editing (46)REFERENCES 47TROUBLESHOOTING..........................................47USER MAINTENANCE.........................................51CAUTIONS........................................................52SPECIFICATIONS (55)TERMS Back cover6 EN GETTING STARTED IndexEN7GETTING STARTEDG E T T I N G S T A R T E DControlsA Stop Button [8] (੬pg.20)Index Button [INDEX] (੬pg.27)Backlight Compensation Button [BACK LIGHT] (੬pg.40)B Play/Pause Button [4/9] (੬pg.20)Manual Focus Button [FOCUS] (੬pg.38)C Rewind Button [3] (੬pg.20)Menu select Button [pg.15)੬pg.20)D ੬pg.20)Menu select Button [+] (੬pg.15)Night Button [NIGHT] (੬pg.38)E Menu Button [MENU] (੬pg.31)Data Battery Button [DA T A] (੬pg.14)F VIDEO/MEMORY Switch (੬pg.14)G LED Light Button [LIGHT] (੬pg.37)H Dioptre Adjustment Control (੬pg.16)I Snapshot Button [SNAPSHOT] (੬pg.25,38)Live Slow Button [SLOW] (੬pg.31,37)J Power Zoom Lever [T/W] (੬pg.19)Speaker Volume Control [VOL. +,–] (੬pg.20)K Battery Release Button [PUSH BA TT.] (੬pg.13)L Recording Start/Stop Button (੬pg.18)M Power Switch [A , M , PLAY, OFF] (੬pg.14)N Lock Button (੬pg.14)O Cassette Open/Eject Switch [OPEN/EJECT] (੬pg.16)ConnectorsThe connectors are located beneath the covers.P USB (Universal Serial Bus) Connector (੬pg.45)Q S-Video/Audio/Video Input/Output Connector [S/AV] (੬pg.22,43)R DC Input Connector [DC] (੬pg.13)S Digital Video Connector [DV IN/OUT] (i.Link*) (੬pg.44,45)T Microphone connector [MIC] (੬pg.34,46)(An optional microphone can be used during video recording and audio dubbing. T ostabilise the microphone, use of an optional shoe adapter is recommended.)*i.Link refers to the IEEE1394-1995 industryspecification and extensions thereof. The logo is used for products compliant with the i.Link standard.IndicatorsU POWER/CHARGE Lamp (੬pg.13,18)Other PartsV Monitor Latch (੬pg.18)W LCD Monitor (੬pg.18,19)X Viewfinder (੬pg.16)Y Card Cover [MEMORY CARD] (੬pg.17)Z Battery Pack Mount (੬pg.13)a Shoulder Strap Eyelet (੬pg.11)b Speaker (੬pg.20)c Grip Strap (੬pg.15)d Lense LED Light (੬pg.37)(When using an optional conversion lens, it may cover this area and block the light.)f Remote Sensor (੬pg.23)g Camera Sensor(Be careful not to cover this area, a sensor necessary for shooting is built-in here.)h Stereo Microphone (੬pg.46)i Stud Hole (੬pg.16)j T ripod Mounting Socket (੬pg.16)k Cassette Holder Cover (੬pg.16)GETTING STARTED8 EN LCD Monitor/Viewfinder Indications(੬pg.41)B Tape Running Indicator (੬pg.18)(Rotates while tape is running.)੬pg.33)੬pg.37)੬pg.38)੬pg.32)F Tape Remaining Time (੬pg.18)G REC: (Appears during recording.) (੬pg.18)PAUSE: (Appears during Record-Standby mode.) (੬pg.18)H Insert Editing/Insert Editing Pause Mode (੬pg.46)I 5S/Anim.: Displays the 5-Second Recording mode or Animation recording mode. (੬pg.33)J Wind Cut Indicator (੬pg.33)K Time Code (੬pg.34,36)L Digital Image Stabiliser (“DIS”) (੬pg.32)M SOUND 12BIT/16BIT: Sound Mode Indicator (੬pg.32) (Appears for approx. 5 seconds Auxiliary Microphone Level Indicatorconnected. ੬pg.36, “AUX MIC” )(640x 480) (੬pg.34)B Interval Shooting Icon (੬pg.25)C Shooting Icon (੬pg.25)(Appears and blinks during shooting.)D Card Icon (੬pg.25): Appears during shooting.: Blinks in white when a memory card is not loaded.: Blinks in yellow while the camcorder is reading the data in the memory card.E Picture Quality: (FINE) and(STANDARD) (in order of quality) (੬pg.34)F Remaining Number Of Shots (੬pg.25)(Displays the approximate remaining number of shots that can be stored during D.S.C. recording.)G Clock Icon (੬pg.25)੬pg.14)੬pg.38)੬pg.32)੬pg.37)੬pg.41)40)40)±: Exposure Adjustment Indicator (੬pg.39)F Selected Program AE With Special Effects Indicator (੬pg.42)G Iris Lock Indicator (੬pg.39)EN9GETTING STARTEDG E T T I N G S T A R T E DH Approximate Zoom Ratio (੬pg.19)I Zoom Indicator (੬pg.19)J O : (Appears when taking Snapshot.) (੬pg.25,38)SLOW : (Appears when using Live Slow.) (੬pg.37)K Brightness Control Indicator (LCD monitor/Viewfinder) (੬pg.16)L Battery Remaining Power Indicator (੬pg.49)M Date/Time (੬pg.15)N Manual Focus Adjustment Indicator (੬pg.38)B Blank Search Indicator (੬pg.21)੬pg.37)੬pg.35,38)੬pg.32)E 4: Playback5: Fast-Forward/Shuttle Search 3: Rewind/Shuttle Search9: Pause9 U : Forward Frame-By-Frame Playback/Slow-MotionY 9: Reverse Frame-By-Frame Playback/Slow-MotionD : Audio Dubbing9D : Audio Dubbing Pause(Appear while a tape is running.)FSound Input For Audio Dubbing (੬pg.46)G Battery Remaining Power Indicator (੬pg.49)H Date/Time (੬pg.34,36)I VOLUME: Volume Level Indicator (੬pg.20)BRIGHT: Brightness Control Indicator (LCD monitor/Viewfinder) (੬pg.16)੬pg.34,36)Auxiliary Microphone Level Indicatorconnected during Audio Dubbing. ੬pg.46)B Folder/File Number (੬pg.27)C Battery Remaining Power Indicator (੬pg.49)D Brightness Control Indicator (LCD monitor/Viewfinder) (੬pg.16)GETTING STARTED 10 ENBefore Using This CamcorderMake sure you only use cassettes with the Mini DV mark .markThis camcorder is designed exclusively for the digital video cassette, SD Memory Card and MultiMediaCard. Only cassettes marked “” and memory cards marked “” or” can be used with this unit. Remember that this camcorder is notcompatible with other digital video formats. Remember that this camcorder is intended for private consumer use only.Any commercial use without proper permission is prohibited. (Even if you record an event such as a show, performance or exhibition for personal enjoyment, it is strongly recommended that you obtain permission beforehand.)Before recording important video, be sure to make a trial recording.Play back your trial recording to make sure the video and audio have been recorded properly.We recommend cleaning your video heads before use.If you haven’t used your camcorder for a while, the heads may be dirty. We recommend periodically cleaning the video heads with a cleaning cassette (optional).Be sure to store your cassette tapes and camcorder in the proper environment.Video heads can become dirty more easily if your cassette tapes and camcorder are stored in a dusty area. Cassette tapes should be removed from the camcorder and stored in cassette cases. Store the camcorder in a bag or other container.Use SP (Standard) mode for important video recordings.LP (Long Play) mode lets you record 50% more video than SP (Standard) mode, but you may experience mosaic-like noise during playback depending on the tape characteristics and the usage environment.So, for important recordings, we recommend using SP mode.It is recommended that you use JVC brand cassette tapes.Y our camcorder is compatible with all brands of commercially available cassette tapes complying with the MiniDV standard, but JVC brand cassette tapes are designed and optimized to maximize the performance of your camcorder.Also read “CAUTIONS” on pages 52–54.●Microsoft® and Windows® are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.●Macintosh is a registered trademark of Apple Computer, Inc.●QuickTime is a registered trademark of Apple Computer, Inc.EN11GETTING STARTEDG E T T I N G S T A R T E Db Power Cord (only for AP-V14E)c Battery Pack BN-VF707Ud S/AV Cable e USB Cablef Core Filter (for USB cable, ੬pg.12 for attachment)g CD-ROMh Remote Control Unit RM-V720Ui Lithium Battery CR2025* (for remote control unit)j Memory Card 8MB (Already inserted in the camcorder) (GR-D290 only)k Shoulder Strap (see the right column for attachment)lLens Cap (see the right column for attachment)*the insulation sheet.NOTES:●In order to maintain optimum performance of the camcorder, provided cables may be equipped with one or more core filter. If a cable has only one core filter, the end that is closest to the filter should be connected to the camcorder.●Make sure to use the provided cables for connections. Do not use any other cables.How To Attach The Shoulder StrapFollow the illustration.1Thread the strap through the eyelet.2Fold it back and thread it through the strapguide and the buckle.●To adjust the length of the strap, loosen and then tighten the strap in the buckle.3Slide the strap guide fully towards the eyelet.Provided AccessoriesGETTING STARTED12 ENHow To Attach The Core FilterAttach the core filters to the cables. The core filter reduces interference.1Release the stoppers on both ends of thecore filter.2Run the cable through the core filter, leavingapprox. 3cm of cable between the cable plug and the core filter.Wind the cable once around the outside of the core filter as shown in the illustration.Close the core filter until it clicks shut.NOTES:●Take care not to damage the cable.●When connecting a cable, attach the end with the core filter to the camcorder.Core filterEN13GETTING STARTEDG E T T I N G S T A R T E DThis camcorder’s 2-way power supply system lets you choose the most appropriate source of power. Do not use provided power supply units with other equipment.1Set the Power Switch to “OFF”.2With the arrow on the battery pack pointing downward, push the battery pack slightly against the battery pack mount a .3Slide down the battery pack until it locks inplace b .4Connect the AC Adapter to the camcorder.5Connect the Power Cord to the AC Adapter.(AP-V14E only)6Plug the AC Adapter into an AC outlet. ThePOWER/CHARGE lamp on the camcorder blinks to indicate charging has started.7When the POWER/CHARGE lamp goes out,charging is finished. Unplug the AC Adapter from the AC outlet. Disconnect the AC Adapter from the camcorder.To detach the battery packSlide the battery pack upward while pressing PUSH BATT. to detach it.*ProvidedNOTES:●It is recommended that only genuine JVC batteries are used in this camcorder. Usinggeneric non-JVC batteries can cause damage to the internal charging circuitry.●If the protective cap is attached to the battery pack, remove it first.●During charging, the camcorder cannot be operated.●Charging is not possible if the wrong type of battery is used.●When charging the battery pack for the first time or after a long storage period, the POWER/CHARGE lamp may not light. In this case, remove the battery pack from the camcorder, then try charging again.●If the battery operation time remains extremely short even after having been fully charged, the battery is worn out and needs to be replaced. Please purchase a new one.●Since the AC Adapter processes electricityinternally, it becomes warm during use. Be sure to use it only in well-ventilated areas.●Using the optional AA-VF7 Battery Charger, you can charge the BN-VF707U/VF714U/VF733U battery pack without the camcorder.●After 5 minutes has elapsed in Record-Standby mode with the cassette inserted, the camcorder will automatically turn off its power supplied from the AC adapter. In this case, the battery charge starts if the battery is attached to the camcorder.Using The Battery PackPerform steps 2 – 3 in “Charging The Battery Pack”.Maximum continuous recording time*ProvidedPowerBattery pack Charging time BN-VF707U*Approx.1hr.30min.BN-VF714U Approx.2hr.40min.BN-VF733U Approx.5hr.40min.Battery pack LCD monitoron Viewfinder on BN-VF707U*1hr.5min.1hr.25min.BN-VF714U 2hr.20min.3hr.BN-VF733U 5hr.25min.7hr.5min.CONTINUED ON NEXT PAGEGETTING STARTED14 ENNOTES:●Recording time is reduced significantly under the following conditions:•Zoom or Record-Standby mode is engaged repeatedly.•The LCD monitor is used repeatedly.•The playback mode is engaged repeatedly.•The LED Light is used.●Before extended use, it is recommended that you prepare enough battery packs to cover 3times the planned shooting time.ATTENTION:Before detaching the power source, make sure that the camcorder’s power is turned off. Failure to do so can result in a camcorder malfunction.Data Battery SystemY ou can check the remaining battery power and the recordable time.1)Make sure the battery is attached and the Power Switch is set to “OFF”.2)Open the LCD monitor fully.3)Press DATA , and the battery status screen appears.●It can be displayed on the viewfinder when the LCD monitor is closed.●It is displayed for 5 seconds if the button is pressed and released quickly, and for 15 seconds if the button is pressed and hold forseveral seconds.●If “COMMUNICATION ERROR” appearsinstead of the battery status even though you tried to press DATA several times, there may be a problem on the battery. In such a case, consult your nearest JVC dealer.Using AC PowerPerform steps 4 – 5 in “Charging The Battery Pack”.NOTE:The provided AC Adapter features automatic voltage selection in the AC range from 110V to 240V .About BatteriesDANGER! Do not attempt to take the batteries apart, or expose them to flame or excessive heat, as it may cause a fire or explosion.WARNING! Do not allow the battery or itsterminals to come in contact with metals, as this can result in a short circuit and possibly start a fire.To resume the original function of the accurate battery power indicationIf the battery power indication differs from the actual operating time, fully charge the battery, and then run it down. However this function may not turn back if the battery was used for a long period of time under extremely high/low temperature condition or charged too many times.T o turn on the camcorder, set the Power Switch to any operation mode except “OFF” while pressing down the Lock Button located on the switch.Choose the appropriate operation modeaccording to your preference using the Power Switch and VIDEO/MEMORY Switch.Operation ModePower Switch PositionA (Full Auto Recording):Allows you to record using NO special effects or manual adjustments. Suitable for standard recording.The “A ” indicator appears on the display.M (Manual Recording):Allows you to set various recording functions using the Menus. (੬pg.31)If you want more creative capabilities than Full Auto Recording, try this mode.OFF :Allows you to switch off the camcorder.PLAY:●Allows you to play back a recording on the tape.●Allows you to display a still image stored in the memory card or to transfer a still image stored in the memory card to a PC.●Allows you to set various playback functions using the Menus. (੬pg.31)EN15GETTING STARTEDG E T T I N G S T A R T E DPower-Linked OperationWhen the Power Switch is set to “A ” or “M ”, you can also turn on/off the camcorder by opening/closing the LCD monitor or pulling out/pushing in the viewfinder.INFORMATION:The following explanations in this manual supposes the use of LCD monitor in your operation. If you want to use the viewfinder, close the LCD monitor and pull out the viewfinder fully.The language on the display can be changed. (੬pg.31,34,36)1Set the Power Switch to “M ” while pressingdown the Lock Button located on the switch.2Open the LCD monitor fully. (੬pg.18)3Press MENU . The Menu Screen appears.4Press + or – to select“n ”, and press MENU .The CAMERA DISPLAY Menu appears.5Press + or – to select “LANGUAGE”, and press MENU .6Press + or – to selectpress MENU .7Press + or – to select“B RETURN”, and press MENU twice. The Menu Screen closes.The date/time is recorded onto the tape at all times, but its display can be turned on or off during playback. (੬pg.31,36)1Perform steps 1–4 in “Language Settings”on the left column.2Press + or – to select “CLOCK ADJ.”, andpress MENU . The parameter for “Day” is highlighted.3Press + or – to inputthe day, and press MENU . Repeat to input the month, year, hour and minute.4Press + or – to select“B RETURN”, and press MENU twice. The Menu Screen closes.1Adjust the velcro strip.2Pass your right handthrough the loop and grasp the grip.3Adjust your thumb andfingers through the grip to easily operate the Recording Start/StopButton, Power Switch and Power Zoom Lever. Besure to fasten the velcro strip to your preference.Language SettingsDate/Time SettingsGrip AdjustmentGETTING STARTED16 EN1Set the Power Switch to “A” or “M” while pressing down the Lock Button located on theswitch.2Make sure the LCD monitor is closed and locked. Pull out the viewfinder fully and adjust it manually for best viewability.3T urn the Dioptre Adjustment Control until the indications in the viewfinder are clearly focused.1to “Mswitch.2fully. (੬pg.18)●(੬pg.31,34).3Press MENU4Press + or – to select “n”, and press MENU. The CAMERA DISPLAY Menu appears.5Press + or – to select “BRIGHT”, and press MENU. The Menu Screen closes and the brightness control indicator appears.6Press + or – until the appropriate brightness is reached.7Press MENU to clear the brightness control indicator from the display.T o attach the camcorderto a tripod, align thedirection stud and screwto the mounting socketand stud hole on thecamcorder. Then tightenthe screw clockwise.●Some tripods are notequipped with studs.The camcorder needs to be powered up to load or eject a cassette.OPEN/EJECT in the direction●Once the cassette holder is closed, it recedes automatically. Wait until it recedes completely before closing the cassette holder cover.Viewfinder AdjustmentTripod MountingLoading/Unloading A CassetteEN17GETTING STARTEDG E T T I N●When the battery pack’s charge is low, you may not be able to close the cassette holder cover. Do not apply force. Replace the battery pack with a fully charged one or use AC power before continuing.3Close the cassette holder cover firmly until itlocks into place.To protect valuable recordingsSlide the erase protection tab on the back of the tape in the direction of “SAVE”. This prevents the tape from being recorded over. T o record on this tape, slide the tab back to “REC” before loading it.NOTES:●If you wait a few seconds and the cassette holder does not open, close the cassette holder cover and try again. If the cassette holder still does not open, turn the camcorder off then on again.●If the tape does not load properly, open the cassette holder cover fully and remove the cassette. A few minutes later, insert it again.●When the camcorder is suddenly moved from a cold place to a warm environment, wait a short time before opening the cassette holder cover.The provided memory card is already inserted in the camcorder at the time of purchase. (GR-D290 only)1Make sure the camcorder’s power is off.2Open the card cover (MEMORY CARD).3To load a memory card , firmly insert it withits clipped edge first.To unload a memory card , push it once. After the memory card comes out of the camcorder, pull it out.●Do not touch the terminal on the reverse side of the label.4Close the card cover.To protect valuable files (available only for SD Memory Card)Slide the write/erase protection tab on the side of the memory card in the direction of “LOCK”. This prevents the memory card from being recorded over. T o record on this memory card, slide the tab back to the position opposite to “LOCK” before loading it.NOTES:●Some brands of memory cards are not compatible with this camcorder. Before purchasing a memory card, consult its manufacturer or dealer.●Before using a new memory card, it is necessary to format the card. (੬pg.30)ATTENTION:Do not insert or remove the memory card while the camcorder is turned on, as this may cause the memory card to be corrupted or cause thecamcorder to become unable to recognise whether or not the card is installed.Loading/Unloading A Memory CardClipped edge18 EN VIDEO RECORDINGNOTE:Before continuing, perform the procedures listed below:●Power (੬pg.13)●Loading A Cassette (੬pg.16)੬pg.11)2Open the LCD monitor fully.3Set the VIDEO/MEMORY Switch to “VIDEO”. 4Set the Power Switch to “A” or “M” whilepressing down the Lock Button located on theswitch.●The POWER/CHARGE lamp lights and the camcorder enters the Record-Standby mode. “P AUSE” is displayed.●To record in LP (Long Play) mode, ੬pg.32.5T o start recording, press the Recording Start/ Stop Button. “T REC” appears on the display while recording is in progress.6T o stop recording, press the Recording Start/ Stop Button again. The camcorder re-enters the Record-Standby mode.Approximate recording timeNOTES:●If the Record-Standby mode continues for5minutes, the camcorder’s power shuts off automatically. To turn the camcorder on again, push back and pull out the viewfinder again or close and re-open the LCD monitor.●When a blank portion is left between recorded scenes on the tape, the time code is interrupted and errors may occur when editing the tape. To avoid this, refer to “Recording From The Middle OfA T ape” (੬pg.20).●To turn the beep sounds off, ੬pg.31,33.starts blinking.●The time required to calculate and display the remaining tape length, and the accuracy of the calculation, may vary according to the type of tape used.LCD Monitor And ViewfinderWhile using the LCD monitor:downward, 180° upward).While using the viewfinder:Make sure the LCD monitor is closed andLCD monitor and the viewfinder. When the viewfinder is pulled out while the LCD monitor is opened, you can select which one to use. Set “PRIORITY” to the desired mode in SYSTEM Menu. (੬pg.31,34)●Coloured bright spots may appear all over the LCD monitor or the viewfinder. However, this is not a malfunction. (੬pg.48)Basic RecordingTapeRecording mode SP LP30min.30min.45min. 60min.60min.90min. 80min.80min.120min.。
jvc数码摄录一体机使用说明(一)
jvc数码摄录一体机使用说明(一)
JVC数码摄录一体机使用说明
1. 摄录一体机简介
•什么是JVC数码摄录一体机
•主要功能和特点
•适用人群和场合
2. 准备工作
•摄录一体机包装内容
•配件检查和准备
•电池和电源的安装
3. 摄录一体机操作
录像功能
•打开和关闭摄录一体机
•拍摄模式的选择
•调整录像设置（分辨率、帧率等）
拍照功能
•进入拍照模式
•调整拍照设置（分辨率、景深等）•拍照技巧和建议
回放和编辑
•预览和回放录像和照片
•删除、剪辑和合并文件
•导出和分享摄录作品
4. 高级功能和技巧
•手动设置和白平衡
•音频录制和插入外部音源
•使用镜头滤镜和特效
•连接外部设备和电脑
5. 故障排除和常见问题解答
•常见故障原因和解决方法
•常见问题解答
6. 安全使用须知
•使用中的注意事项
•摄录一体机保养和清洁
以上是对JVC数码摄录一体机的使用说明，希望能够帮助和引导用户正确使用这款产品。
jvc数码摄录一体机使用说明
jvc数码摄录一体机使用说明JVC数码摄录一体机是一款功能强大的设备，可用于拍摄高质量的照片和视频。
下面是该产品的简要使用说明：1. 电源：首先，确保摄录一体机充电完毕或已插入电源适配器。
打开电源开关，设备将启动。
2. 摄影模式：摄录一体机可用于拍摄照片和视频。
根据需要选择相应的模式。
使用模式选择按钮进行切换。
对于照片拍摄，选择照相机模式。
对于视频录制，选择摄像机模式。
3. 对焦和曝光：确保所拍摄的物体清晰可见。
使用自动对焦功能或手动对焦来调整焦距。
对于曝光设置，可以使用自动曝光或手动曝光功能，以确保照片或视频的亮度适宜。
4. 存储媒介：该摄录一体机通常配备内置存储器和外部存储卡插槽。
选择一个适当的存储媒介来保存您的照片和视频。
确保存储媒介已正确插入设备。
5. 拍摄和录制：按下快门按钮进行照片拍摄。
如果您要录制视频，请按下录像按钮。
在录制期间，您可以使用变焦功能来调整镜头视野。
6. 播放和回放：使用摄录一体机上的导航菜单来浏览、播放和回放已存储的照片和视频。
通过选择文件并按下播放按钮，您可以观看或浏览媒体文件。
7. 连接电脑：如果您希望将照片和视频传输到电脑上进行进一步的编辑或共享，可以使用USB连接线将摄录一体机连接到电脑。
在连接后，您可以在电脑上查看、编辑和传输文件。
8. 其他功能：此外，JVC数码摄录一体机还可能具备其他功能，如图像稳定和特殊拍摄模式等。
请参阅用户手册以了解更多详细信息。
以上是JVC数码摄录一体机的简要使用说明。
请按照这些步骤操作设备，以获得您所期望的照片和视频效果。
请随时查阅用户手册以获取更多详细信息和操作说明。
祝您使用愉快！。
索尼高清数字电视接收器使用说明书
3-700-303-14(1)数字电视接收器使用说明书DST-HD100C© 2008 Sony Corporation产品中有毒有害物质或元素的名称及含量a 表示有毒有害物质在该部件所有均质材料中的含量均在SJ/T11363-2006标准规定的限量要求以下。
×表示有毒有害物质至少在该部件某一均质材料中的含量超出SJ/T11363-2006标准规定的限量要求。
安全信息请遵守以下注意事项以确保接收器的安全不会受到任何方式的威胁。
切勿将任何物体塞入接收器，否则可能引起火灾或触电。
切勿将任何液体溅到接收器上。
如果有液体或固体物掉入接收器内，请立即关闭接收器并由专业人员进行检查。
切勿将接收器放置在高温、潮湿或满是灰尘的地方。
切勿将接收器安装在可能受机械振动或电磁辐射的地方。
切勿将任何物品放置在接收器上。
为了防止火灾，请将易燃物品或明火（如蜡烛）远离接收器放置。
为了防止火灾或触电危险，切勿将接收器淋雨或受潮。
请用稍湿的软布清洁接收器。
切勿使用任何类型的砂纸、碱性清洁剂、洗衣粉或酒精、汽油等溶剂。
潮湿的手切勿触摸交流电源线或本装置。
如果用潮湿的手将交流电源线插头插入或拔出本装置，则可能引起触电。
请定期清洁交流电源插头。
如果插头被灰尘覆盖并受潮，则插头的绝缘性能可能下降并会导致火灾。
请定期拔掉交流电源插头进行清洁。
接收器内的槽口和开孔为通风所需。
为了确保本装置的正常使用及防止过热，切勿阻塞或盖住这些槽口和开孔。
如果不提供正常的通风，本装置可能会积聚灰尘而变得很脏。
为了能正常通风，请遵守以下事项：s 切勿将本装置向后或侧向放置。
s 切勿将本装置翻转或颠倒放置。
s 切勿用布或其它物品盖住槽口和开孔。
s切勿将本装置放置在床上、沙发上、地毯或其它类似表面上而堵塞槽口和开孔。
s除非能提供正常的通风条件，否则切勿将本装置放置在狭窄的空间内，如书柜或壁橱。
如果将本装置安装在倾斜的表面上，则本装置可能会翻倒或掉落，并造成人员受伤或物品损坏。
移动式电子警察系统手册(jvc)
移动式电子警察系统使用手册技术指标移动式电子警察系统操作使用手册1、系统正确连接。
2、将系统电源箱的电源开关置于闭合位置，给系统供电。
3、启动笔记本电脑系统，再将笔记本电脑集成箱左上角的开关置于闭合状态（系统正常工作状态下不要拔插信号电缆，否则雷达工作不正常）。
4、双击界面上的“移动式电子警察系统”图标，弹出系统设置框如下：5、“系统设置”对话框分为四个项目栏（1）雷达设置：（一）车行方向：车辆行驶与雷达探测方向相同的设置为“同向”；车辆行驶与雷达探测方向相反的为“异向”。
（二）探测车道：探测设备左侧行驶的车辆时，选择“左侧”；探测设备右侧行驶的车辆时，选择“右侧”；在过街天桥等高处检测时选择“下方”。
（三）工作模式：1、静态测速：电子警察系统安装在静止不动的车辆内，抓拍被监控车道行驶的超速车辆。
2、动态测速：安装了电子警察系统的车辆，可以在行驶过程中抓拍被监控车道行驶的超速车辆。
动态测速工作模式要求自身车辆行驶的速度不低于30km/h（四）雷达探测距离：通常选择“近距离”（2）其它设置：（一）请选择数据存储的盘符：从下拉列表中选择存储违法相关资料的盘符。
选择之后，右侧同时会提示该盘符下的硬盘空间。
（二）被检测车辆行驶方向：从下拉列表中选择车辆行驶的方向（三）摄像机与车行方向小于30°的夹角：在这个栏位中输入摄像机与车行方向的实际角度，实际操作时夹角小于30°为宜。
（四）录像（黑车/超速）：勾选项，如果选择该项，系统工作过程中，发现黑车和超速车辆，对该车录像2秒（五）声音提示：勾选项，如果选择该项，系统工作过程中，发现黑车和超速车辆输出声音报警（3）处罚设置：（一）接受处罚地点：填写执法单位的地址（二）联系电话：填写执法单位的联系电话（4）限速设置：（一）监测路段：执法时的路段名称，输入后可以保存，以后再要使用该地点时可以从下拉列表中直接选择。
对于经常变换执法地点的单位，可以将经常使用的路段名称和对应的路段代码按照规定格式形成“路段信息”文件，并将该文件存入系统安装目录下。
新一线通使用说明书 (1).
一线通共缆传输系统用户使用手册目录前言：使用须知 (3)一、系统概述 (4)1、系统简介 (4)2、系统原理 (4)3、系统组成 (4)4、系统特性 (4)5、系统拓扑图 (5)二、系统设备操作说明 (6)1、集成器系列构成及用法 (6)2、控制主机系列构成及用法 (9)3、报警器系列构成及用法 (11)4、综合器系列构成及用法 (13)5、插入器、混合器构成及用法 (14)6、均衡器构成及用法 (17)7、射频F端头的制作 (19)三、系统安装调试方法 (20)四、常见问题及处理方法 (21)附页 (23)1、 RS-485接线端子接口定义 (23)2、综合器在线缆传输中的百米/损耗表 (23)前言：使用须知首先感谢您使用一线通共缆传输系统！为了确保设备的安全使用并且获得满意的使用性能，延长系统设备的使用寿命，在安装操作设备之前，请您仔细阅读本使用手册！1、清点设备及附件当您收到本系统设备时，请根据包装箱内的设备清单进行清点。
2、系统设备安装请根据监控点的具体分布情况，参考设备说明，合理搭配及正确连接一线通共缆传输设备，必要时请咨询当地的经销商或生产商。
3、注意事项◆在系统设备安装调试前，请仔细确认提供的电源，以满足设备的要求。
◆在清洁设备之前，请将电源插头从插座上拔掉，然后用湿抹布擦干净，请注意不能使用液体或喷雾式清洁剂。
◆请不要在有水或潮湿的地方放置产品。
◆请将产品放置在安全，牢固的地方。
必要时，请询问本产品的经销商或生产商。
◆为保证设备的正常运行，请勿将产品放在靠近热源的地方，除非配有专门的通风散热设备，或按照生产商的建议进行。
◆防止让任何性质的固体、液体进入产品内部，以免造成接近高压或零件短路而引起火灾或触电。
◆请不要试图拆开产品外壳进行维修，以免遇到触电或其它危险。
需要拆开产品外壳时，应请专业的技术人员进行。
◆当需要更换零部件时，必须请维修技术员进行，更换的零件必须是由本产品经销商或生产商提供或与原来零件有相同特性的零件。
蓝纳N1说明书
安装与使用说明书使用前请仔细阅读本说明书1、机身接口、按键功能示意图2、开机与使用●开关机：按住开机键5秒开关机。
●安装：机器放置无三脚架支撑时，必须打开支撑架（图1）。
机器保持水平放置，以保证最佳显示效果。
●清晰度调试：通过调节轮，根据距离调试到最佳清晰度。
3、硬件设备与wifi网络连接●遥控器：将遥控器中的蓝牙USB插入投影仪的USB接口，即可连接使用遥控器。
●蓝牙音箱：系统设置--蓝牙--搜索找到蓝牙音箱型号---选择连接。
●Wifi连接：系统设置--wifi连接--选择wifi--输入密码--连接.输入wifi密码，连接上网4、软件更新●软件更新自动提示：系统会弹出对话框，提示是否更新，务必选择更新（有提示时，务必更新，以便更新资讯以及影视资源）●更新步骤：提示更新---更新（选择更新）---系统自动更新（自动下载）---选择安装（下载完成后自动弹出）---更新完成后打开或者完成。
（如有提示GOOGLE验证，选允许）提示更新请选择更新，以便获取新资源提示更新请选择更新，以便获取新资源5、影音、娱乐功能●网络视频，网络电视、电视直播、云音乐、网页浏览器。
●本地视频播放，本地图片浏览。
●U盘，SD卡中的图片，以及视频都可以直接播放。
观看在线视频，在线电视直播，浏览网上各种信息资讯文件管理器里面可以看到所有SD卡，U盘，以及本机中的文件，视频，音乐等。
6、手机投影仪同屏使用本功能请确定你的设备已经连接WIFI，如WIFI关闭，则该功能无法使用苹果手机同屏苹果手机跟投影仪连接同一个wifi。
苹果手机在主界面向上滑动，出现如图1界面。
选择Airplay，选择连接投影仪，点击完成后实现同屏(图2)。
安卓手机同屏手机和投影仪连接同一个Wifi（图1），安卓手机下载乐播同屏（支持4.4以上系统版本）打开乐播视频，点击右上角TV选择连接投影仪设备，点击完成后可先同屏（图2）无网状态手机同屏打开系统设置---其他---便携式热点---设置Wifi热点，设置热点，如下图：直接勾选并打开便携式wifi热点，手机打开wifi搜索热点名称，连接热点后，同屏投影方法参照说明书：苹果手机与安卓手机同屏方法7电源功能说明当本设备产品的电量不足或最后一格电量指示为红色时，本设备会出现充电提示对话框。