道康宁SYLGARD160灌封胶道康宁SYLGARD170灌封胶

合集下载

道康宁导热胶

说明
性能
单组份；低流动性；灰色单组份；低流动性；灰色两组份；灰色；1:1 混合比率；中等粘度两组份；灰色；1:1 混合比率
两组份；半流动性单组份；灰色单组份湿气固化粘合剂单组份湿气固化粘合剂
单组份；灰色流动性；单组份湿气固化粘合剂
单组份；不流动
两组份；半流动性
快速加热固化；高热传导性快速加热固化；高热传导性加热固化；良好的流动性快速加热固化；较长的适用期；优异的流动性；自粘合较长的适用期；快速加热固化；自粘合加热固化；中等热传导性；精炼型可流动并具有中等的热传导性；快速表干高粘度并具有中等的热传导性；UL 94V-1 等级；快速表干加热固化；高热传导性可流动并具有良好的热传导性，精炼型 (D4-D10 < 0.002)；快速表干室温固化；中等热传导性；UL 94 V-0 等级；精炼型；快速表干较长的适用期；快速加热固化；自粘合
热传导性，瓦特/米-K/平方厘米磅／平方英寸 MPa 公斤力/平方厘米延伸率，% 线性热膨胀系数 , 微米/米摄氏度或百万分之一伏特/密耳千伏/毫米介电常数在100 赫兹介电常数在100 千赫兹损耗因子在100 赫兹损耗因子在100 千赫兹体积电阻系数，欧姆-厘米产品在室温下，由生产日期起的保质期，月
热传导灌封胶
外观流动性液体；固化成柔性弹性体
特性恒定的固化速率，与灌封厚度或密封程度无关；无需后固化
可考虑的应用范围灌封高电压变压器及传感器；安装基材与散热器；作为热源和散热器之间的间隙充填材料
热传导复合物类别不固化；热传导硅酮膏
特性高热传导性；低渗油率；高温稳定性
可考虑的应用范围热源和散热器之间的间隙充填材料

有机硅非离子表面活性剂(一)

书山有路勤为径；学海无涯苦作舟
有机硅非离子表面活性剂(一)
摘要：介绍了道康宁公司的非离子型有机硅表面活性剂的定义，亲水
亲油平衡值的定义及测试方法及乳液类型。

表面活性剂是精细化工产品，与有机硅一样素有“工业味精”之称?表
面活性剂具有润湿、乳化、分散、增溶、发泡、消泡、洗涤、保湿、润滑、柔软、憎水、杀菌、抗静电、防惰蚀等一系列优良性能。

它可渗透到一切
经济技术部门，为提高产品质量、节能降耗、提高劳动生产率起到非常大
的作用。

表面活性剂种类繁多，品种在万种以上。

而有机硅表面活性剂是一个较
新的品种，它是精细化工产品中的精品。

在20世纪80年代前道康宁就开
发出有机硅表面活性剂DC一190、193和3225C。

以后圈内晨光化工研究院也开发类似的产品水溶性硅油和CGF系列产品，作为第三代织物整理剂、消泡剂和洗发水的原料。

进入21世纪，随着工业技术向高精尖发展，对
表面活性剂的需求量增大。

因此，新型的有机硅表面活性剂逐渐在市场上
崭露头角。

直至目前道康宁已经开发一系列的性能优异的非离子有机硅表
面活性刺，将在以后的文字巾介绍给大家。

l有机硅表面活性剂的定义
在20℃时，水的表面张力为72．75mN／m。

将不同性质的物质溶于水时，发现水的表面张力会发生变化。

表面张力随着物质的浓度增加，有升、逐
步下降和急速下降三类情况第三类情况的物质则定义为表面活性剂。

例如
道康宁公司的Sylgard@309，当它的水溶液浓度分别为
0．0001％、0．001％和0．01％时它的表面张力分别为
专注下一代成长，为了孩子。

Dow Corning 品牌胶水封装剂双部分室温潮湿愈合类说明书

Information About Dow Corning ® brand Adhesive/SealantsSilicones and ElectronicsLong-term, reliable protection of sensitive circuits and components is important in many of today’s delicate and demanding electronic applications. Silicones function as durable dielectric insulation, as barriers against environmental contaminants and as stress-relieving shock and vibration absorbers over a wide temperature and humidity range.In addition to sustaining their physical and electrical prop-erties over a broad range of operating conditions, silicones are resistant to ozone and ultraviolet degradation, have good chemical stability and are available in a variety of useful forms as conformal coatings, encapsulants and adhesives.Dow Corning’s broad range of general purpose and specialty products offers you a choice of materials for your application needs.Dow Corning offers a variety of noncorrosive silicone products for electronic sealing, bonding and adhering applications. These adhesives generally fall into three cure types. The first group are moisture cure, generally meant for room-temperature processing. The second type(condensation cure) offers rapid room-temperature and deep-section curing. The third type is heat cure for rapid processing. All convert to durable, relatively low stresselastomers. Most will develop good, primerless adhesion to a variety of common substrates including ceramics, reactive metals and filled plastics.TYPICAL PROPERTIESThese values are not intended for use in preparing speciﬁcations.Speciﬁcation Writers: Please obtain copies of the Dow Corning Sales Speciﬁcations for these products and use them as a basis for your speciﬁcations. They may be obtained from any Dow Corning Sales Ofﬁce, or from Dow Corning Customer Service in Midland,MI. Call (517) 496-6000.HEAT CURE TIMESCURE CONDITIONSOne-Part Moisture Cure RTVThe one-part moisture cure adhesives (838, 839, 3165, 3145,3140 and 3-1744) are generally cured at room temperature and in a range of 30 to 80 percent relative humidity. Greater than 90 percent of their full physical properties should be attained within 24 to 72 hours depending on the product chosen. Materials and parts can be handled in much shorter times of about 10 to 120 minutes depending on the product chosen and the amount of material used per part. These materials are not typically used for highly confined or deep section cures. Materials will generally cure about 0.25 inch per seven days from any exposed surface. Cure progresses from the outer surface and is dependent on the moisture in the air. Working time is generally a few minutes to an hour for these products until a surface skin begins to form. Mild heat acceleration of the cure rate may be possible but temperatures above 60°C (140°F) are not recommended.Two-Part Room Temperature Condensation CureDow Corning ® Q3-6093 Silicone Adhesive is the only two-part condensation curing product. Once mixed, cure progresses rapidly at room temperature. Good strength is attained within an hour but full properties are not reached for anumber of days. Q3-6093 adhesive contains its own source of moisture and cure progresses evenly throughout the material.Deep section or confined cures are possible however (see “Reversion”). Working time is only a few minutes.Heat CureThe addition curing adhesives (577, 3-6876, 3-6611 and 3-6265) should be cured at 100°C (212°F) or above. The cure rate is rapidly accelerated with heat (see cure schedulesin table). For thicker sections or if voiding is observed, a 30 minutes pre-cure at 70°C (158°F) may reduce voids in the elastomer. Addition-curing materials contain all the ingredients needed for cure with no byproducts from the cure mechanism. Deep section or confined cures arepossible. Cure progresses evenly throughout the material.These adhesives generally have long working times.PREPARING SURFACESAll surfaces should be thoroughly cleaned and/or degreased with Dow Corning ®brand OS Fluids, naphtha, mineral spirits,methyl ethyl ketone (MEK) or other suitable solvent.Solvents such as acetone or isopropyl alcohol (IPA) do not tend to remove oils well, and any oils remaining on the surface may interfere with adhesion. Light surface abrasion is recommended whenever possible, because it promotes good cleaning and increases the surface area for bonding. A final surface wipe with acetone or IPA is also useful.Different cleaning techniques may give better results than others. Users should determine the best techniques for their applications.ADHESIONDow Corning silicone adhesives are specially formulated to provide unprimed adhesion to many reactive metals,ceramics and glass, as well as to selected laminates, resins and plastics. However, good adhesion cannot be expected on nonreactive metal substrates or non-reactive plastic surfaces such as Teflon ®, polyethylene or polypropylene. Special surface treatments such as chemical etching or plasma treatment can sometimes provide a reactive surface and promote adhesion to these types of substrates. Dow Corning ®brand primers (see “Primer Selection Guide”) can be used to increase the chemical activity on difficult substrates.2P5200 Red is a low-VOC alternative to 1200 Red.3P5204 is a low-VOC alternative to 1204.4The lower VOC value is for states and air quality management districts that have recognized volatile methylsiloxanes as VOC exempt.PRIMER SELECTION GUIDEThese values are not intended for use in preparing specifications.Poor adhesion may be experienced on plastic or rubber substrates that are highly plasticized, because the mobile plasticizers act as release agents. Small-scale laboratory evaluation of all substrates is recommended before production trials are made.In general, increasing the cure temperature and/or cure time will improve the ultimate adhesion.SUBSTRATE TESTINGDue to the wide variety of substrate types and differences in substrate surface conditions, general statements on adhesion and bond strength are impossible. To ensure maximum bond strength on a particular substrate, 100 percent cohesive failure of the adhesive in a lap shear or similar adhesive strength test is desired. This ensures compatibility of the adhesive with the substrate being considered. Also,this test can be used to determine minimum cure time or can detect the presence of surface contaminants such as mold release agents, oils, greases and oxide films.USEFUL TEMPERATURE RANGESFor most uses, silicone elastomers should be operational over a temperature range of -45 to 200°C (-49 to 392°F) for long periods of time. However, at both the low and high temperature ends of the spectrum, behavior of the materials and performance in particular applications can become more complex and require additional considerations.For low-temperature performance, thermal cycling to conditions such as -55°C (-67°F) may be possible, butperformance should be verified for your parts or assemblies.Factors that may influence performance are configuration and stress sensitivity of components, cooling rates and hold times, and prior temperature history.At the high-temperture end, the durability of the cured silicone elastomer is time and temperature dependent. As expected, the higher the temperature, the shorter the time the material will remain useable.COMPATIBILITYCertain materials, chemicals, curing agents and plasticizers can inhibit the cure of addition cure adhesives. Most notable of these include:•Organotin and other organometallic compounds •Silicone rubber containing organotin catalyst •Sulfur, polysulfides, polysulfones or other sulfur-containing materials•Amines, urethanes or amine-containing materials •Unsaturated hydrocarbon plasticizers •Some solder flux residuesIf a substrate or material is questionable with respect to potentially causing inhibition of cure, it is recommended that a small scale compatibility test be run to ascertain suitability in a given application. The presence of liquid or uncured product at the interface between the questionable substrate and the cured gel indicates incompatibility and inhibition of cure.MIXING AND DE-AIRINGUpon standing, some filler may settle to the bottom of the liquid containers after several weeks. To ensure a uniform product mix, the material in each container should be thoroughly mixed prior to use.1Clear only.2Gray only.3UL746C Approved.LISTINGS AND SPECIFICATIONSDow Corning Corporation Midland, Michigan 48686-0994Dow Corning and Sylgard are registered trademarks of Dow Corning Corporation.Teflon is a registered trademark of E.I. du Pont de Nemours Co.©2000 Dow Corning Corporation. All rights reser ved.Printed in USAAGP4781Form No. 10-911A-01Two-part materials should be mixed in the proper ratio (1:1or 10:1) either by weight or volume. The presence of light colored streaks or marbling indicates inadequate mixing.Automated airless dispense equipment can be used toreduce or avoid the need to de-air. If de-airing is required to reduce voids in the cured elastomer, consider a vacuum de-air schedule of >28 inches Hg for 10 minutes or until bubbling subsides.REVERSIONWhen two-part condensation curing materials with organo-tin catalysts, such as Q3-6093 adhesive, are cured in confinement (especially in deep section) and are later subjected to high heat conditions, can potentially revert back from a cured elastomer to a flowable polymer.Although this condition is unusual, parts using Q3-6093adhesive should be thoroughly tested in accelerated temperature conditions for this potential limitation.SOLVENT EXPOSUREWhen liquid or vapor solvent or fuel exposure can occur in an application, the silicone adhesives discussed in thisbrochure are intended only to survive splash or intermittent exposures. They are not suited for continuous solvent or fuel exposure. Testing should be done to confirm performance of the adhesives under these conditions.STORAGE AND SHELF LIFEShelf life is indicated by the “Use Before” date found on the product label.For best results, Dow Corning RTV adhesives should be stored at or below 25°C (77°F). Special precautions must be taken to prevent moisture from contacting these materials.Containers should be kept tightly closed and head or air space minimized. Partially filled containers should be purged with dry air or other gases, such as nitrogen.Dow Corning heat-cure adhesives should also be stored at or below 25°C (77°C). Containers should be kept tightly closed and kept in cold storage at all times to extend shelf life.LIMITATIONSThese products are neither tested nor represented as suitable for medical or pharmaceutical uses.PACKAGINGIn general, Dow Corning adhesives/sealants are supplied in nominal 0.45-, 3.6-, 18- and 200-kg (1-, 8-, 40- and 440-lb)containers,net weight. Not all products may be available in all packages and some additional packages, such as a bladder packs or tubes, may be available for certain coatings and package sizes.SAFE HANDLING INFORMATIONPRODUCT SAFETY INFORMATION REQUIRED FOR SAFE USE IS NOT INCLUDED. BEFORE HANDLING,READ PRODUCT AND MATERIAL SAFETY DATA SHEETS AND CONTAINER LABELS FOR SAFE USE, PHYSICAL AND HEALTH HAZARD INFORMATION. THE MATERIAL SAFETY DATA SHEET IS AVAILABLE FROM YOURDOW CORNING REPRESENTATIVE, OR DISTRIBUTOR,OR BY WRITING TO DOW CORNING CUSTOMER SERVICE, OR BY CALLING (517) 496-6000.WARRANTY INFORMATION – PLEASE READ CAREFULLYThe information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control,this information should not be used in substitution for customer’s tests to ensure that Dow Corning’s products are safe, effective, and fully satisfactory for the intended end use. Dow Corning’s sole warranty is that the product will meet the Dow Corning sales specifications in effect at the time of shipment. Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replace-ment of any product shown to be other than as warranted.Dow Corning specifically disclaims any other express or implied warranty of fitness for a particular purpose or merch-antability. Unless Dow Corning provides you with a specific,duly signed endorsement of fitness for use, Dow Corning disclaims liability for any incidental or consequential damages.Suggestions of uses should not be taken as inducements to infringe any particular patent.。

道康宁润滑剂摩力克总汇

【道康宁润滑剂】液压油 美国道康宁 MOLYKOTE®（摩力克 TM）特种润滑剂美国道康宁 Dow Corning 大全Molykote 产品针对您的润滑问  题... 道康宁 MOLYKOTE  Molykote G72/Molykote G/72 有机硅润滑脂           Molykote 产品-针对您的润滑问题的解决方案Dow Corning 4 compound Dow Corning 5 Dow Corning 7 compound、Dow Corning 7 Molykote 33 light/medium Molykote 41 Molykote 44 light/medium Molykote 55(M)/Molykote 55M Dow Corning 111 compound/Dow Corning 111 Dow Corning 4 Molykote 7348/Molykote7348 Dow Corning 340 导热硅脂/Dow Corning 340 Molykote G-5032/Molykote G5032 Molykote PG 21/Molykote PG21      Molykote PG54/Molykote PG 54 Dow Corning High-Vaccum Grease Molykote G-5008/Molykote G5008/Molykote G 500... Molykote 7508/Molykote7508 Molykote 7325/Molykote7325 Dow Corning 112 compound/Dow Corning112 Molykote 822M/Molykote 822 M道康宁 MOLYKOTE  FORAFAC F1157/FORAFAC F 1157 氟碳表面活性 剂...  FORAFAC F321/FORAFAC F321 FORAFAC 1268/FORAFAC® 1268 FORAFAC 1203/FORAFAC1203 FORAFAC 1157N/FORAFAC 1157 N道康宁 MOLYKOTE  Molykote M-77 装配油膏/Molykote M-77 装配油装配油膏膏... Molykote D Paste 装配油膏/Molykote DPaste 装配油...   Molykote G-n Plus/Molykote G-n Plus Molykote U paste/MolykoteU paste Molykote U-n/Molykote U n Molykote M-77/MolykoteM-77  Molykote G-Rapid plus (spray)/Molykote G-Rapi... Molykote G-n plus/Molykote G-n plus Molykote D paste(spray)/Molykote D paste spra...道康宁 MOLYKOTE  Molykote P-1900/Molykote P1900 脂类油膏      Molykote P1500/Molykote P 1500 Molykote X /Molykote X Molykote TP-42/Molykote TP42 Molykote P40/Molykote P 40 Molykote E paste Molykote DX Paste Molykote CU-7439/Molykote CU-7439 润滑油膏道康宁 MOLYKOTE  Molykote G-2001/Molykote G2001 润滑脂       Molykote 165LT/Molykote 165 LT/Molykote165LT Molykote 1122 (spray)/Molykote 1122spray Molykote BG20/Molykote BG 20 Molykote BG 555/Molykote BG555 Molykote BR 2 plus/Molykote BR 2plus Molykote FB180/Molykote FB 180 Molykote G-0010/Molykote G-0010 Molykote G 67/Molykote G67                  Molykote G-6000/Molykote G6000 Molykote G-0100/Molykote G0100 Molykote G-0102/Molykote G0102 Molykote 1102/Molykote1102 Molykote G-1001/Molykote G1001 Molykote G3407Molykote G-3407/刹车卡钳润滑脂 Molykote G-4700/Molykote G4700 Molykote Longterm 00/Molykote Longterm00 Molykote Longterm 2 plus/Molykote Longterm 2p... Molykote Longterm W2/Molykote LongtermW2 Molykote Longterm 2/78G/Molykote Longterm 2/7... Molykote MKL-N(spray)/Molykote MKL-N spray Molykote Multilub/Molykote Multilub Molykote TTF52/Molykote TTF 52 Molykote® BR-2 Plus Multi-Purpose EP Grease Molykote G-407/Molykote G407 Molykote 8018/Molykote 8018 Molykote G-807/Molykote G807 Molykote G-0101/Molykote G-0101道康宁 MOLYKOTE  Molykote PG-30L/Molykote PG30L 塑料用润滑脂Molykote YM103/Molykote YM-103                    Molykote YM-103/Molykote YM 103 Molykote YM-102/Molykote YM102 Molykote PG663/Molykote PG-663 Molykote PG-662/Molykote PG662 Molykote PG661/Molykote PG-661 Molykote 6166/Molykote6166 Molykote PG75/Molykote PG 75 MOLYKOTE EM-70L/MOLYKOTE EM 70L Molykote G2003/Molykote G-2003 Molykote G 68/Molykote G68 Molykote EM-D110/Molykote EM-D110 Molykote EM-60L/Molykote EM 60L Molykote EM-50L/Molykote EM50L Molykote EM-30L/Molykote EM30L Molykote PG-602/Molykote PG602 MOLYKOTE(摩力克) PG-641/MOLYKOTE PG-641 MOLYKOTE G-1023/MOLYKOTE G1023MOLYKOTE G-1031/MOLYKOTE G-1031 GREASE MOLYKOTE G-1050 GREASE/MOLYKOTE G-1050 Molykote SK-623/Molykote SK 623 Molykote 7514/Molykote 7514           MOLYKOTE® AG-650/MOLYKOTE AG-650 Molykote X5-6020/Molykote X5 6020 Molykote PG65/Molykote PG 65 molykote EM-10L grease/molykote EM-10L MOLYKOTE® PG-671/MOLYKOTE PG-671 MOLYKOTE EM-60L/MOLYKOTE EM 60L MOLYKOTE EM-50L/MOLYKOTE EM 50L MOLYKOTE EM-40L/MOLYKOTE EM 40L MOLYKOTE EM-40L/MOLYKOTE EM 40L MOLYKOTE EM-30L/MOLYKOTE EM 30L Molykote G-1017/Molykote G1017 Molykote MI-60/Molykote MI 60 Molykote PD900/Molykote PD 900 Molykote BG 87/Molykote BG87 Dow Corning FS 1265 Fluid Molykote FS1292/Molykote FS 1292 Molykote FS3451/Molykote FS 3451 MOLYKOTE® HF-30 OIL/MOLYKOTE HF-30 Molykote HP-300(spray)/Molykote HP-300 Molykote HP-500/Molykote HP500 Molykote 6169/Molykote6169道康宁MOLYKOTE 含氟  润滑剂                Molykote PD910/Molykote PD 910 molykote hp-300 Molykote PD910/Molykote PD 910 Molykote PD930/Molykote PD 930 Molykote PD920/Molykote PD 920 MOLYKOTE HF-50/MOLYKOTE HF 50 Molykote HF-50/Molykote HF 50 MOLYKOTE L-8008/MOLYKOTE®）L-8008 Molykote HF-60/Molykote HF-60 Molykote G8007/Molykote G8007 Molykote HP-870/Molykote HP-870道康宁 MOLYKOTE  Molykote PTFE-N (spray) 减摩涂层        Molykote D708/Molykote D 708 Molykote D96/Molykote D 96 Molykote D31/Molykote D 31 Molykote D3484/Molykote D 3484 Molykote D321R (spray)/Molykote D321 R (spray... Molykote D-10/Molykote D10 Molykote 7409/Molykote7409 Molykote 7405/Molykote7405 Molykote 7400/Molykote7400  Molykote 3402C/Molykote3402C Molykote 3400A(Leadfree) Molykote 106 /Molykote106 Molykote Z Powder Molykote Microsize、Molykote Microsize道康宁 MOLYKOTE  二硫化钼粉末道康宁 MOLYKOTE  Molykote W15/Molykote W 15 液体分散液  Molykote M55 plus/Molykote M55 Molykote A(spray)/Molykote A Molykote 557 (spray)/Molykote 557道康宁 MOLYKOTE  Molykote L-0122FG/Molykote L-0122 FG 高温链条油         Molykote M30/Molykote M 30 Molykote S-1500/Molykote S1500 Molykote S-1501/Molykote S1501 Molykote S-1502/Molykote S1502 Molykote S-1503/Molykote S1503 Molykote S-1504/Molykote S1504 Molykote L-1428/Molykote L1428 Molykote L-0115/Molykote L0115 Molykote CO 220/Molykote CO220 Molykote L-0122/Molykote L 0122         Molykote L-1428/Molykote L-1428 Molykote L-0132/Molykote L 0132 Molykote L-0132FG/Molykote L-0132 FG Molykote L-0146/Molykote L-0146 Molykote L-0146FG/Molykote L0146 FG Molykote L-0168/Molykote L0168 Molykote L-1168/ Molykote L1168 Molykote L-0460FG/Molykote L-0460 FG Molykote H 1468FG/Molykote H 1468 FG Molykote L-0115FG/Molykote L-0115FG Dow Corning 702/Dow Corning702 Dow Corning® 316 Molykote Supergliss spray Molykote S-1000/11/02/03/04spray Molykote Polygliss-N spray Molykote Omnigliss(spray) Molykote Multigliss 5 in 1(spray) Molykote Metal Protector plus (spray) Molykote Metal Cleaner spray/Brake Cleaner Molykote Metalform Molykote HTP道康宁MOLYKOTE 特种  产品         Molykote HTF、Molykote HTF Molykote Zinc Coating L-0500(spray) 道康宁二甲基硅油 PMX-200 Dow Corning 705 扩散泵硅油 Dow Corning 704 扩散泵硅油 Dow Corning 702 扩散泵硅油 Molykote L-0510FG 多功能油 Molykote L-0510 多功能油* Molykote L-0568 多功能油* Molykote L-1368FG 合成液压油 Molykote L-0532FG 多功能油* Molykote L-1346FG 合成液压油 Molykote L-0368FG 液压油 Molykote L-0346FG 液压油 Molykote L-0346 液压油道康宁 MOLYKOTE  扩散泵硅油  道康宁 MOLYKOTE  液压系统润滑 油...      道康宁 MOLYKOTE  Molykote L-3246 合成压缩机油压缩机及真空 泵...  Molykote L-1240 半合成压缩机油 Molykote L-1232 合成压缩机油 Molykote L-1232FG 合成压缩机油 Molykote L-1246 合成压缩机油    Molykote L-1246FG 合成压缩机油 Molykote L-1268 合成压缩机油 Molykote L-0246 螺旋压缩机油 Molykote L-3232 合成压缩机油 Molykote L-1605FG/Molykote L-1605 FG 合成阻尼油...      Molykote L-4646 合成高温压缩机油 Molykote L-4610 合成活塞压缩机油 Molykote L-0610 真空泵油 Molykote L-1668FG/Molykote L-1668 FG 真空泵油 Molykote L-0668 氨冷冻压缩机油 Molykote L-4640 合成压缩机清洗油 Molykote L-1210 合成压缩机油道康宁 MOLYKOTE  Molykote L-0510FG/Molykote L-0510 FG 多功能润滑油 Molykote L-0510/Molykote L0510 Molykote L-0568FG/Molykote L0568 FG Molykote L-0532FG道康宁 MOLYKOTE  Molykote 食品级工业润滑油食品级润滑剂Molykote G-4501/Molykote G4501 Molykote White EP/Molykote WhiteEP         Molykote Separator Spray Molykote P1900/Molykote P 1900 Molykote G-4500(spray) Molykote G-0052FG /Molykote G-0052FG Molykote G-0051FG,/Molykote G-0051FG Molykote G-0050 FG/Molykote G-0050FG Molykote Food Grade Spray Oil Molykote Food Grade EP2/Molykote Food Grade E... Molykote Food Grade EP1/Molykote Food Grade E... Molykote Food Grade E 0/Molykote Food Grade E...道康宁 MOLYKOTE  Dow Corning DC735/737/7091/1200 工业硅酮密封 胶...   Dow Corning DC730/732/734/736 道康宁 DC-734 密封胶道康宁-DC732 密封胶道康宁 995 硅酮结构密封胶 DC786 密封胶/DC832 密封胶/DC866 流动性密封胶 /DC1...DOW CORNING(R) 8888道康宁 MOLYKOTE道康宁润滑剂润滑油产品总汇...。

Sylgard184-1

组成●双组分硅橡胶固化●25~150℃特性●透明，介电稳定性，物理性能高物理形态●♉固化前：中等粘度液体●♉固化后：有韧性弹性体产品资料书道康宁SYLGARD 184 硅橡胶基本组分与固化剂基本用途灌封与包封概述道康宁SYLGARD 184硅橡胶是由液体组分组成的双组分套件产品，包括基本组分与固化剂。

基本组分与固化剂按10:1重量比完全混合，中等粘度混合液的稠度与SAE 40机油相似。

无论厚薄，混合液将固化成为具有韧性的透明弹性体，最适用于电子／电气方面的封装与灌封应用。

道康宁SYLGARD 184硅橡胶在25~150℃的温度范围内固化，无放热现象，无需二次固化。

固化过程完成后，可立即在-55~200℃的温度范围内使用。

特性●低毒性，在常规的工业操作中，无特别的注意事项；●无溶剂或固化副产物，固化时不放热；无需特殊的通风条件，不会产生腐蚀；固化时，收缩量小；●固化后，透明具有弹性；抗震与减缓机械震动；振动的传递性能小；元件可裸视检查与易修补性；●环保性能；低吸水性，良好的耐辐射性能；高真空状态下的低漏气性；●优异的电性能；●较大温度范围内的稳定性，抗解聚；在-55~200℃范围内，甚至在密闭状态下保持弹性与柔韧性，性能稳定；●阻燃性，UL可燃性分级为94 V-1，温度等级：130℃应用道康宁SYLGARD 184硅橡胶在电气／电子的封装与灌封方面有广泛的应用；以下应用方面具有环保作用：设备模型●继电器、电源和磁放大器●变压器、线圈和铁氧体磁芯●接线器●纤维光学波导涂层●电路板的封装道康宁SYLGARD 184硅橡胶适用于净化应用方面，包括：●太阳能电池的封装●光电显示器的封装典型物性CTM 0001A 比重，25℃11.05CTM 0050 粘度2，25℃，厘泊(cps) 5500双组分混合3CTM 0050 粘度，25℃，厘泊(cps) 3900CTM 0055 操作时间4，≥，小时2固化后－物理性能CTM 0176 外观透明CTM 0099 邵氏A硬度，度40CTM 0137A 拉伸强度，Mpa(psi) 6.20(900) CTM 0137A 扯断伸长率，％，100CTM 0159A 撕裂强度，B型模，kN/m(ppi) 2.6(15)CTM 0022A 比重，25℃ 1.05CTM 0224 热导率，cal/sec/cm2/(℃/ cm) 3.5x104CTM 0585 线性热膨胀系数(-55~150℃), cc/cc/℃ 3.0x104CTM 0585 体积热膨胀系数(-55~150℃), cc/cc/℃9.6x104MIL-I-16923G 抗热冲击性(-49~68℃) 10个循环重量损失，％150℃，1000小时 1.6200℃，1000小时 3.2ASTM D 570 吸水性，25℃，7天，％0.10ASTM D 746 脆点，℃-65CTM 0002 折射率，25℃， 1.430耐辐射性，钴60放射源200兆拉德可使用500兆拉德发硬，变脆UL 94 可燃性分类694V-1UL 温度等级机械，℃130电子，℃130电性能7CTM 0114A 绝缘强度，V/mil8450CTM 0112 介电系数，于60Hz 2.7100Hz 2.661000Hz 2.65CTM 0112 耗散因数，于60Hz 0.001100Hz 0.0009100kHz 0.001CTM 0249A 体积电阻率，Ω/cm 2.0x1015CTM 0171 抗电弧性，秒115电性能－热老化，200℃，1000小时CTM 0114A 绝缘强度，V/mil8600CTM 0112 介电系数，于60Hz 2.7100Hz 2.7CTM 0249A 体积电阻率，Ω/cm 2.0x1015注：1. 在大多数情况下，CTMs（元件测试方法）与ASTM标准测试方法相对应。

道康宁sc102散热膏技术规格书(TDS)

粘合电源供应器元件，油墨打印机压头；粘结ICs与散热器粘合电源供应器元件，油墨打印机压头；粘结ICs与散热器粘合集成电路基材，粘合盖子与外壳；粘结散热器
粘结混合电路或微处理器与散热器
自动或手工点胶自动或手工点胶自动装置，双组份无气式混合设备；手工混合及多脱泡自动或手工点胶自动或手工点胶自动或手工点胶自动或手工点胶自动或手工点胶
张力强度
介电强度
道康宁® 产品
1-4173 热传导粘合剂
1.9 900 6.2 63.3 20 126 425 16.7 4.98 4.86
0.008
1-4174 热传
导粘合剂
1.9 900 6.2 63.3 22 – 425 16.7 – 4.63
–
3-6605 热传导粘合剂
0.85 850 5.9 59.8 90 225 455 17.9 4.51 4.5
NA
NA NA
NA
NA NA NA NA
340 散热器复
合物
单组份白色不流动 NA NA 2.1
NA NA NA
NA
NA NA NA NA
热传导凝胶
SE4440-LP 热
传导凝胶
两组份灰色 3,600
120°C 时 – 58 2.01 24 小时 – – 30分钟 – NA NA NA
SE4445CV 热
热传导粘合剂类别无腐蚀性，单组份，室温湿气固化，以及单或两组份加热固化硅酮弹性体
外观非流动的及流动的两种选择；固化成柔性弹性体
特性室温或快速热固化；各种不同的热传导性；抵受湿气及其它恶劣环境影响；良好的介电性能；自粘合；低应力
可考虑的应用范围散热器或基板连接；灌封电源供应器

道康宁灌封材料技术文档TDS

类型弹性体
双组分有机硅弹性体
外观双组分有机硅弹性体
特性流动性液体；固化后形成柔性弹性体；固化速度均匀，与灌封的厚度和环境的密闭程度无关；使用温度在-45到 200°C(-49 到392°F)；无需二次固化；优良的绝缘性能；模量低，超级的应力释放性能；易于再加工和修理。
潜在用途在高湿、极端温度、热循环应力、机械冲击和振动、霉菌、污垢等恶劣条下为电气/电子装置和元器提供保护。
道康宁 ® SE 1740
无底漆有机硅灌封胶道康宁 ® 3-8264无底漆有机硅粘合剂
道康宁 ® 567无底漆有机硅灌封胶
道康宁 ® 3-4207 介电柔韧凝胶套装
潜在用途
普通灌封；电源供应器；连接器；传感器；工业控制；变压器；放大器；高压电阻器；太阳能电池。
Sylgard® Q3-3600 A&B导双组分，1:1混合，快速热固化，具有无底漆粘结 1:1混合比；长适用期；良好的流动性；无底
热灌封胶
能力和良好的阻燃性质。
漆；导热；UL V-1可燃性等级。
道康宁 ® S1混合，红棕色热固化灌封胶，精炼级和良好的阻燃性质。
150°C (302°F)时需1小时
1以上这些数据是以样品量50-100克进行收集的，都非常具有代表性，因此可作为固化时间的初步估计。固化时间会随样品的不同而有轻微的变化，也会由于您元器的大小和加热速度而变长或变短。建议您在使用前预先测试加以验证。 2对于无底漆粘合产品，其固化时间由达到所需硬度的时间来决定。固化时若需要完全的粘结性能需要更长的时间。
检查。在某些具体设计或应用条下，道康宁 ®
3-4207介电绝缘柔韧凝胶可能会丧失粘合力；建议进行全环境暴露试验。

道康宁电动汽车有机硅材料dowcorning-SelectionGuide-sample-kits

2.9
55 (邵氏00型)
道康宁® TC-4525导热材料的玻璃微珠版本（180微米）
组分A: 223,000 组分B: 216,000 混合: 217,000
已固化: 2.9
40 (邵氏00型) 32 (肖氏W型)
-50至80℃: 95 -50至150℃: 123
-
备注 -
-
非固化型
300,000
时间: 4分钟
流动性: 60 毫米已固化: 2.6
[JIS])
-
-
铝: 110 psi
60 分钟/120℃
组分A: 3,100 组分B: 2,500 混合: 2,900
已固化: 1.67
30 (邵氏A型)
-
1.5毫米下的UL可燃性：94 V-0
阳极氧化铝: 220 psi 60 分钟/120℃
组分A: 1,600 组分B: 1,400 混合: 1,900
导热粘合剂
道康宁® TC-2035导热粘合剂
道康宁® SE 4485导热粘合剂道康宁® SE 4485 L导热粘合剂道康宁® SE 4486导热粘合剂道康宁® TC-4605导热灌封胶
道康宁® TC-4605 HLV导热灌封胶
单组分或双组分
颜色
导热性，W/m.K
热阻，℃/W
研发中:用于汽车电子设备的1.8 W/m.K导热填缝剂材料
3.1
-
-
-
研发中
组分A: 250,000
铝: 435psi, 3Mpa,
300N/m3
60 分钟/130℃
组分B: 200,000 混合: 220,000
-
92 (邵氏A型)
-

1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。

道康宁SYLGARD 160灌封胶道康宁SYLGARD 170灌封胶
恩讯浦科技有限公司代理销售道康宁（Dow Corning）全系列产品
美国道康宁SYLGARD 160A B双组分灌封胶
产品介绍：美国道康宁要用法
• 浇灌和密封
类型
• 双组分硅酮弹性体
概述
SYLGARD 160硅酮弹性体制供货时是一种双组分的套装材料，它由A、B两部分液体组分组成。

A组是灰色的，B组分是微黄色的，以便于识别和检查它们是否彻底混合。

当两组分以1：1重量比或体积比充分混合时，混合液体会固化为柔性弹性体，本产品适用于电气/电子产品的灌封和密封。

SYLGARD 160 硅酮弹性体可在室温下固化，也可在高温下加速固化。

适用期限和室温下固化时间与采用的材料数量无关。

固化时材料无时显的收缩和温升
SYLGARD 160 硅酮弹性体完成UL“塑料材料的可燃性试验”，通过UL 94 V-0级认证。

：
美国道康宁SYLGARD 170 A B
恩讯浦科技有限公司代理销售道康宁（Dow Corning）全系列产品
产品介绍：美国道康宁SYLGARD 170 A 和B 硅酮弹性体供货时是一种双组分的套装材料，它由 A 、B 两部分液体组分组成。

A 组分是黑色的，B 组分是微黄色或米黄色的，以便于识别和检查它们是否完全混合。

当两组分以1 : 1 的重量比或体积比充分混合时，混合液体会固化为软性弹性体，本产品理想地适用于电气/电子产品的灌封和密封。

本产品可在室温下完全固化，也可在高温下加速固化以满足快速生产的要求。

SYLGARD 170 A 和B 硅酮弹性体的特性和优点如表 1 所示。

用途
由于SYLGARD 170 A 和B 硅酮弹性体具有许多特点，而且成本较低、使用方便，因而是各种电气/电子灌封或密封应用的理想选择。

A、B 两组分以1 : 1 的比例混合，这种混合系统较为精确，而对按重量或体积配比时较小的误差并不很敏感。

同时，这种系统能理想地适用于自动混合与配制设备和大量生产应用。

道康宁SYLGARD 184 硅橡胶
恩讯浦科技有限公司代理销售道康宁（Dow Corning）全系列产品
产品介绍：美国道康宁道康宁SYLGARD 184硅橡胶是由液体组分组成的双组分套件产品，包括基本组分与固化剂。

基本组分与固化剂按10:1重量比完全混合，中等粘度混合液的稠度与SAE 40机油相似。

无论厚薄，混合液将固化成为具有韧性的透明弹性体，最适用于电子／电气方面的封装与灌封应用。

Dow corning CN-8760G 灌封胶
恩讯浦科技有限公司代理销售道康宁（Dow Corning）全系列产品
美国道康宁(Dow corning) 732、734、736、737、738、739、744、748、780、LDC7091有机硅密封胶；、CN-8605 室温固化粘结胶；3140、LDC3140、3145、3165 RTV胶；SE9168、SE9184、SE9186、SE9176、SE9187L、SE9189L 矽胶；SE4410、SE4420、SE4450 导热硅胶；160、170 ，CN-8760G灌封胶；1-2577 防水油、1-2577 LOW VOC 线路板防潮绝缘油；1-2620、3-1753、3-1953、3-1744、3-1944、3-1765、3-1965 绝缘披覆胶；340、CN-8880、SC102、TC-5021、TC-5022、TC-5026、TC-5121导热硅脂、Q1-9226 散热绝缘胶
道康宁SYLGARD 567灌封胶
恩讯浦科技有限公司代理销售道康宁（Dow Corning）全系列产品
道康宁DC567 无底漆涂有机硅密封套装∶双组分，1:1混合，黑色灌封胶，具有良好的阻燃性质。

适用于电子器件的无底漆灌封。

低粘度。

颜色：黑色
粘度：1480mpa.s
密度：1.23
硬度:45A
导热率:0.3
认证：UL94V-0 /Mil Spec
热固化时间：90min/100℃
道康宁SYLGARD 527灌封胶
恩讯浦科技有限公司代理销售道康宁（Dow Corning）全系列产品
敏感元器件灌封胶
SYLGARD? 527 A&B SILICONE DIELECTRIC GEL
SYLGARD? 527 A&B 有机硅介电凝胶∶双组分，透明或红色，1:1混合凝胶
适用于敏感元器件的灌封。

道康宁sylgard 527特性：
25摄氏度的密度= 0.95
体积电阻系数= 7e+015 ohm-centimeters
保质期= 360 天
凝胶硬度= 115 克/穿透(1
动态粘滞度= 430 厘泊
可流动
室温固化－小时24 小时to 168 小时
供应道康宁1-2577 Dow Corning 1-2577
恩讯浦科技有限公司代理销售道康宁（Dow Corning）全系列产品
DC1-2577 防潮绝缘保护膜，室温或加热固化，含溶剂型，色泽：透明/黄，混合比：单液，产品特性：UL94V-0,MIL认可，中粘度。

主要用途
硬性和软性印刷线路板的保护涂覆和浸渍多孔衬底的保护涂覆
概述
道康宁1-2577敷形涂料是一种透明的硅酮树脂，具有良好的高频和低频介电性质，与以往常用的硅酮树脂相比具有更好的抗热冲击性能。

同时它还具有很好的耐湿性，以及用于太阳能装置时的优良的光传输能力。