Stud bolts & Nuts Technical Data
bolts and studs 翻译
bolts and studs 翻译bolts and studs（螺栓和螺柱）是两种常见的连接元件，用于固定和连接机械部件。
下面是关于螺栓和螺柱的详细翻译和用法的例句：- 螺栓（bolts）是一种具有螺纹的紧固件，通常由金属制成。
螺栓具有头部和螺纹杆身，通过旋转螺母将两个零件固定在一起。
- Bolts are fasteners with threads, typically made of metal. They consist of a head and a threaded shank, and are used to secure two parts together by rotating a nut.- 螺柱（studs）是一种类似于螺栓的紧固件，但没有头部。
它们通常通过两端的螺纹固定在工件上，并在另一端使用螺母进行连接。
- Studs are similar to bolts, but they lack a head. They are usually fastened to a workpiece with threads on both ends, and are connected using a nut at the other end.- 螺栓和螺柱通常用于汽车、建筑、机械、航空航天等行业中，以提供稳固的连接。
- Bolts and studs are commonly used in industries such as automotive, construction, machinery, aerospace, etc., to provide secure connections.- 螺栓和螺柱的尺寸和材料可以根据应用的要求而有所不同。
常见的螺栓标准包括英制螺纹（例如UNC、UNF）和公制螺纹（例如M6、M8）。
- The size and material of bolts and studs can vary depending on the requirements of the application. Common bolt standards include Imperial threads (e.g., UNC, UNF) and metric threads (e.g., M6, M8).- 使用螺栓和螺柱时，需要根据材料和应力要求来选择合适的紧固力。
螺栓_螺母英文简称
Bras(Cu) 铜
29 Aluminum
AL 铝
30 Rubber
Rub 橡胶
31 machine screw mech scr 机制螺丝
32 SEM screw SEM Scr 组合螺丝
33 Material
material 材料
34 Grade
GD
等级
35 Finish
Finish 表面处理
36 Point
穴
10 hexagon hexa 六角
11 tooth
tooth 齿
12 lock
lck
锁
13 spring
spr 弹簧
14 wave
wave 波浪型
15 pitch
pitch
牙距
16 partial thread P T 半螺纹
17 PT
PT 一种螺纹形式
18 Full Thread FT 全螺纹
械
螺
丝
61 Stainless Steel Self Drilling Screws 不锈钢
钻
尾
螺
丝
62 Stainless Steel Self Tapping Screws 不 锈
钢
自
攻
螺
丝
63 Stainless Steel Thread Cutting Screws 不锈
钢
自
削
螺
丝
64 Stainless Steel Tri-Lobular Thread Screws 不锈钢三角牙螺丝
点图进入相册 弹垫
点图进入相册 膨胀栓螺丝的简称 Nhomakorabea及术语50 Quality / 质量 51 surface hardness 表面硬度 52 product treatment 表面处理 53 plating 电镀 54 heat 热
法兰螺栓长度(美标)
20
9
10
24 1.7/8"
13 12.75 13.25
20
SOFFLANGEBOLTS（ANSIB16.5）
900LB
1500LB
Machine
Machine
Bolt
Bolt
Length 六角螺 Diam. Of 拴长度 Bolts 螺 栓直径 0.25" Raised Face RF 面
Length
双头螺栓长度
Male-
Female tongueGroove 凹凸面，
Ring joint RTJ面舌槽面ຫໍສະໝຸດ 舌槽面3/4"
4.25
4 4.25
4 3/4"
4.25
4 4.25
3/4"
4.5 4.25
4.5
4 3/4"
4.5 4.25
4.5
7/8"
5 4.75
5
4 7/8"
5 4.75
5
7/8"
5 4.75
18
8 1.1/4" 8 1.1/2" 12 1.3/8" 12 1.5/8" 12 1.7/8" 16 2" 16 2.1/4" 16 2.1/2"
16 2.3/4"
16
3
16 3.1/2"
7.75 9.75 10.25 11.5 13.25 14.75
6 17.5
19.5
21.25
24.25
7.5 9.5 10 11.25 13 14.5 15.75 17.25
150LB
螺丝机械英语对照总表
螺丝/机械英语对照总表Bolt/wash,螺栓Set crew,固定螺丝Nut螺母Set screw圆螺母Lock washer锁紧垫圈Lock nut锁紧螺帽Scr hex六角螺钉Washer垫圈Shoulder bolt肩部螺丝Blot hex六角螺栓Weld nut焊接螺母Grease Fitting 45 Degree 45度组合接头Rivet铆钉Washer 25 Narrow 25窄垫圈Cotter pin带销螺栓Dowel pin, 定位销Screw 螺丝Stud柱头螺栓Hardened washer-硬垫圈; dowel pin-,开槽销,定缝销钉; cotter pin-开口销; escutcheon pin-销帽; Zinc Clear白锌HEX表示六角形的ANSI表示美国国家标准化组织PLAIN表示本色/本色处理Zinc Blue为兰锌，简称ZU；Zinc Black为黑锌，简称ZB；Zinc Yellow为彩锌，简称ZC；Zinc Clear 为白锌，简称ZI；Black Anodize为氧化黑色，简称BL；Natural Anodize为氧化本色，简称NA；Black Lacquer 为黑漆，简称LA；Copper red为红铜，简称RU；Copper Yellow为黄铜，简称YU；Nickel over copper 为铜底镍，简称CN；Nickel Flash为亮镍，简称Ni；Nickel electroless为无电解镍，简称EN；Chrome Flash 为亮铬，简称CR；Tin Flash为亮锡，简称ET白鐵蓋螺絲A2(18-8)CAP SCREWS水平調整螺絲ADJUSTED LEVELING SCREWS航太扣件AEROSPACE FASTENERS合金鋼螺絲(栓) ALLOY STEEL SCREWS (BOLTS)鋁螺絲ALUMINUM SCREWS車輛(汽車)螺絲、螺帽AUTOMOTIVE FASTENERS複含材料鉆尾螺絲BI-METAL SELF DRILLING SCREWS大尺寸螺絲BIG SIZE BOLTS公母螺絲組BINDER POST & SCREW SET拉栓BLIND BOLTS銅螺絲(栓) BRASS SCREWS (BOLTS)建築螺絲BUILDING FASTENERS建築膨漲螺絲BUILDING WALL ANCHOR半圓頭六角孔螺絲BUTTON HEAD SOCKET CAP SCREWS馬車螺絲CARRIAGE BOLTS活動輪螺絲附件CASTORS FITTINGS塑板螺絲CHIPBOARD SCREWS快速釘緊螺絲及螺帽CLINCH STUDS & NUTS擠壓扣件CLINCHING FASTENERS齒花扣件CLINCHING PARTS寬牙螺絲COARSE THREAD SCREWS鏈帶螺絲COLLATED SCREWS水泥螺絲CONCRETE SCREWS板模扣件CONSTRUCTION FASTENERS貨櫃螺絲CONTAINER SCREWS耐候鋼螺絲CONTEN STEEL HEAVY HEX BOLTS魚尾螺絲CONTEN STEEL OVAL NECK TRACK BOLTS 雙刀螺絲CUTTER SCREWS匣板螺絲DECK SCREWS鋅蝶螺絲DIE CAST WING SCREWS;ZINC ALLOY雙頭牙螺絲DOUBLE END SCREWS電子螺絲ELECTRONIC SCREWS電梯螺絲ELEVATOR BOLTS歐洲螺絲EURO SCREWS環首螺絲EYE BOLTS岡山頭螺絲FILLISTER SCREWS鰭頭螺絲FIN NECK ROUND HEAD BOLTS管配件接頭FITTING FASTENERS (CONNECTORS)突緣螺絲FLANGE BOLTS (SCREWS)平頭六角孔螺絲FLAT HEAD SOCKET CAP SCREWS平紡螺絲FLAT PAN HEAD SCREWS地板螺絲FLOORING PANEL SCREWS基礎螺絲FOUNDATION BOLTS框架支撐螺絲FRAME ANCHOR-LAG ROUND SCREWS傢俱螺絲FURNITURE SCREWS (CONNECTING BOLTS)重型車螺絲、螺帽HEAVY DUTY WHEEL HUB BOLTS & NUTS 六角螺絲(栓) HEX HEAD CAP SCREWS (HEX BOLTS)六角機械螺絲HEX HEAD MACHINE BOLTS六角木牙螺絲HEX LAG BOLTS內六角孔螺絲HEX SOCKET CAP SCREWS等高螺絲HEX SOCKET HEAD SHOULDER SCREW薄頭強力螺絲HEX SOCKET LOW HEAD CAP SCREW內六角固定螺絲HEX SOCKET SET SCREWS華司頭機械螺絲HEX WASHER HEAD MACHINE SCREWS高低牙螺絲HIGH LOW THREAD SCREWS高張力螺絲HEX SOCKET HEAD SHOULDER SCREW鉸鏈螺絲HINGE SCREWS勾頭螺栓HOOK BOLTS管夾螺絲HOSE CLAMP SCREWS哈克釘HUCK BOLTS旋鎖螺絲KTX LOCKING RECESS SCREWS機械螺絲MACHINE SCREWSMDF螺絲MDF SCREWS微小精密螺絲MICRO SCREWS鉬六角螺絲MO HEX HEAD CAP SCREWS鉬NC螺絲MO NC FASTENERS鉬螺帽MO NUTS鎳合金螺絲MONEL FASTENERS多衝程螺絲MULTI-STAGE SCREW & PARTS利革釘NYLON PLUG & SCREWS單向螺絲ONE WAY LAG SCREWS枋頭中心螺絲PAN HEAD CENTER BOLTS面板螺絲PANEL FASTENERS複合材料用螺絲(夾板用) PARTICLE BOARD SCREWS貫穿螺絲PENETRATE SCREWS十字四角複合螺絲PH+SQ COMBINATION SCREWS塑膠螺絲PLASTIC SCREWS犁壁螺絲PLOW BOLTS特殊精密螺絲PRECISION AXIS AND SPECIAL FASTENERS卷帶螺絲ROLL COLLATED SCREWS屋頂螺絲ROOFING SCREWS螺旋椿SCREW STUDS機(踏)車用螺絲.軸心SCREWS & SHAFTS FOR MOTORCYCLE OR BICYCLE針車用螺絲.軸心SCREWS & SHAFTS FOR SEWING MACHINE螺絲附華司組合SCREWS & WASHERS ASSEMBLED (SEMS)安全螺絲SECURITY SCREWS鑽尾螺絲SELF DRILLING SCREWS自攻螺絲SELF TAPPING SCREWS固定螺絲SCREWS & SHAFTS FOR SEWING MACHINE剪力釘SHEAR CONCRETE STUD束肩螺絲(栓) SHOULDER SCREWS (BOLTS)一字溝槽固定螺絲SLOTTED SET SCREWS止付螺絲SOCKET SET SCREWS飛機特殊扣件SOURCE CONTROL BOLTS特殊塗裝螺絲SPECIAL COATING SCREWS特長螺絲SPECIAL LONGER SCREWS特殊材質螺絲SPECIAL MATERIAL SCREWS特殊螺絲SPECIAL SCREWS OR BOLTS特殊防鬆螺絲SPECIAL SELF-LOCKING SCREWS不鏽鋼特殊螺絲SPECIAL STAINLESS STEEL SCREWS特殊割尾螺絲SPECIAL THREAD CUTTING SCREWS四角螺絲SQUARE HEAD BOLTS四角頭固定螺絲SQUARE HEAD SET SCREWS不鏽鋼大螺絲STAINLESS STEEL BOLTS不鏽鋼塑板螺絲STAINLESS STEEL CHIPBOARD SCREWS不鏽鋼粗牙螺絲STAINLESS STEEL COARSE THREAD SCREWS不鏽鋼旋入螺絲STAINLESS STEEL DRIVE SCREWS不鏽鋼平頭內六角孔螺絲STAINLESS STEEL FLAT HEAD SOCKET CAP SCREWS 不鏽鋼六角螺絲STAINLESS STEEL HEX HEAD CAP SCREWS不鏽鋼內六角螺絲STAINLESS STEEL HEX SOCKET CAP SCREWS不鏽鋼固定螺絲STAINLESS STEEL HEX SOCKET SET SCREWS不鏽鋼高低牙螺絲STAINLESS STEEL HIGH-LOW THREAD SCREWS不鏽鋼機械螺絲STAINLESS STEEL MACHINE SCREWS不鏽鋼小螺絲STAINLESS STEEL SCREWS不鏽鋼鑽尾螺絲STAINLESS STEEL SELF DRILLING SCREWS不鏽鋼自攻螺絲STAINLESS STEEL SELF TAPPING SCREWS不鏽鋼SEMS 螺絲STAINLESS STEEL SEMS SCREWS不鏽鋼自削螺絲STAINLESS STEEL THREAD CUTTING SCREWS不鏽鋼牙條棒STAINLESS STEEL THREAD ROD不鏽鋼三角牙螺絲STAINLESS STEEL TRIANGULAR SCREW THREAD不鏽鋼木螺絲STAINLESS STEEL WOOD SCREWS卡鎖壁虎STEEL LOCKING ANCHOR大頭馬車螺絲STEP BOLTS螺樁栓STUD BOLTST頭螺絲T HEAD BOLTS扭矩控制螺栓T.C. BOLTS (TENSION CONTROL BOLTS)自削螺絲THREAD CUTTING SCREWS牙條棒THREAD ROD姆指螺絲THUMB SCREWS鈦合金自行車螺絲TITANIUM -6AL –4R ALLOY FASTENERS鈦合金螺絲TITANIUM ALLOY BOLTS鈦六角螺絲TITANIUM HEX HEAD CAP SCREWS (HEX BOLTS)鈦NC螺絲TITANIUM NC FASTENERS鈦止付螺絲TITANIUM SET SCREWS鈦內六角孔螺絲TITANIUM SOCKET CAP SCREWS鈦牙條TITANIUM THREAD ROD套掛螺絲TOGGLE BOLTS套掛螺栓及螺絲TOGGLE BOLTS & ACOUSTICAL LAG (SCREWEYE)馬桶螺絲TOILET CLOSET BOLTSTORX SCREWS TORX SCREWS軌道螺栓(魚尾螺絲) TRACK BOLTS三角牙螺絲TRIANGULAR SCREWS THREADU型螺栓U BOLTS直立軸螺絲VERTICAL SHAFT SCREWS焊接螺絲WELD STUDS,SCREWS,BOLTS焊點螺絲WELD STUDS SCREWS輪轂螺栓WHEEL BOLTS車輪軸螺絲,螺帽WHEEL HUB BOLTS AND NUTS窗戶螺絲WINDOW SCREWS翼形螺絲WING SCREWS木螺絲WOOD SCREWS鋯螺絲ZR FASTENERSSET SCREWS SET SCREWSHIGH STRENGTH BOLTS HIGH STRENGTH BOLTS鐵蓋焊接袋帽ACORN CAP NUTS金屬預置扭矩式螺帽ALL-METAL PREVAILING TORQUE TYPE NUTS 合金鋼螺帽ALLOY STEEL NUTS鋁螺帽ALUMINUM NUTS小眼釘CEILING HANGER化學壁虎CHEMICAL STUD實心梢CLEVIS PINS & STRAIGHT PINS彈片CLIPS捲釘COIL NAILS冷鍛零件COLD FORMING PART開口梢COTTER PINS洋釘鉤CUP HOOKS弧型華司CURVED WASHER外迫壁虎CUT ANCHOR插梢DOWEL PIN捶釘DRIVE RIVET壁虎DROP IN ANCHORE型環E-RINGS膨脹螺栓EXPANSION ANCHOR BOLTS難眼釘EYELETS RIVETS門鉤GATE HOOKS插溝銷GROOVED PINS有槽鋼釘GROOVED STEEL NAILS火藥釘GUNPOWDER NAILS壁鉤HARDWALL HANGERS雙片夾壁虎HEAVY DUTY SHIELD ANCHOR R型梢HITCH PINS（SNAP PINS）空心釘HOLLOW RIVETS洋釘IRON NAILSJ鉤J HOOKK.D. FITTING K.D. FITTING閂鎖LATCHES & KEEPER ASSEMBLEDS多衝程鉚釘MULTI-STAGE RIVERS錘釘壁虎NAIL IN ANCHOR尼龍壁虎NYLON (METAL) FRAME ANCHOR 塑膠華司NYLON WASHERS其他特殊鉚釘OTHER SPECIAL RIVETS樣品鉤PEGBOARD HOOK吊圖鉤PICTURE HANGERS梢PINS各式管夾,管束PIPE HANGER管塞PIPE PLUG塑膠壁虎PLASTIC NYLON ANCHORSPOP拉釘系列產品POP RIVETS快速插銷QUICK RELEASE PINSR型扣環R-RINGS扣環RINGS鉚釘RIVETS圓棒鐵釘ROUND IRON NAILST型鐵釘ROUND IRON TAPE T NAIL圓棒鋼釘ROUND STEEL NAILST型鋼釘ROUND STEEL TAPE T NAILSU型鋼釘ROUND STEEL TAPE U NAILS橡膠華司RUBBER WASHERSS鉤S HOOKSS型扣環S-RINGS螺旋鋁釘SCREW ALUMINUM NAILS螺旋環(洋眼) SCREW EYES螺旋鉤及螺旋圈SCREW HOOK & SCREW RINGS螺絲鉤SCREW HOOKS螺旋鐵釘SCREW IRON NAILS螺旋鋼釘SCREW STEEL NAILS中空鉚釘SEMI-TUBULAR RIVET套管壁虎SLEEVE ANCHOR實心鉚釘SOLID RIVETS特殊華司SPECIAL WASHERS快速鉚接扣件SPEED RIVETING開叉釘SPLIT DRIVE ANCHORS彈簧梢SPRING PIN彈簧華司SPRING WASHERS彈簧蝴蝶夾SPRING WINGS折釘SQUARE HOOKS不鏽鋼鋼釘STAINLESS STEEL NAILS不鏽鋼中空釘STAINLESS STEEL SEMI-TUBULAR RIVET不鏽鋼斜紋釘STAINLESS STEEL SLANTING STRIPES NAILS 不鏽鋼華司STAINLESS STEEL WASHERS鋼鐵釘STEEL & IRON NAILS鋼釘STEEL NAILSL型鋼釘STEEL TAPE L NAILS鐵馬鉤STORAGE HOOK吸盤鉤SUCTION HANGERS蘭花鉤SWAG HOOKS三角吊鉤SWIVEL LOOP HANGERS地毯鋼釘TACKED IRON NAILS搓牙鐵釘THREAD NAILS大眼釘TIE WIRE SPADE STUD鈦合金鉚釘TITANIUM ALLOY RIVETS鈦合金膨漲螺絲TITANIUM ALLOY EXPANSION BOLTS鈦華司TITANIUM WASHERS齒型華司TOOTH LOCK WASHERS管形鉚釘TUBULAR RIVETS雙向迫緊器TURNBUCKLE節牙鋼釘W/STRIP STEEL NAILS華司WASHERS壁虎螺帽ANCHOR NUTS圓柱帽BARREL NUTS (CROSS DOWEL)大尺寸螺帽BIG SIZE NUTS銅螺帽BRASS NUTS四角多用途螺帽CAGE NUTS袋帽CAP NUTS城堡螺帽CASTLE NUTS齒花螺帽CLINCH NUTS鐵蓋袋帽CLOSED END ACORN NUTS盤形華司+袋帽螺帽CONICAL WASHER AND CAP NUTS 盤形華司螺帽CONICAL WASHER NUTS耐候鋼六角重型螺帽CORTEN STEEL HEAVY HEX NUTS 長螺帽COUPLING NUTS鐵蓋+尼龍圈組合蓋帽DIN 986 DOMED CAP NUTS碟鎖防鬆脫螺帽DISK-LOCK NUTS企眼螺帽EYE COUPLING NUTS環首螺帽EYE NUTS突緣尼龍螺帽FLANGE NYLON INSERT LOCK NUTS平面華司螺帽FLAT WASHER NUTS齒輪GEARS六角重型螺帽HEAVY HEX NUTS六角蓋頭螺帽HEX CAP NUTS六角突緣螺帽HEX FLANGE NUTS薄型螺帽HEX JAM NUTS薄型電子六角螺帽HEX JAM NUTS (FOR ELECTRONIC)機械螺絲用六角螺帽HEX MACHINE SCREW NUT普通六角螺帽HEX NUTS六角鋸齒螺帽HEX SERRATED NUTS雙頭內牙螺帽HEX (REDUCER )COUPLING NUTS高螺帽HIGH NUTS高張力螺帽HIGH STRENGTH NUTS內外牙螺母(拉帽) INSERT NUTSJCN NUTS JCN NUTS齒形螺帽KEP NUTS防鬆螺帽LOCK NUTS長螺帽LONG NUTS機車用螺帽NUTS FOR MOTORCYCLE面板螺帽NUTS PLATE尼龍袋帽NYLON CAP INSERT LOCK NUTS尼龍嵌入防鬆螺帽NYLON INSERT LOCK NUTS馬桶螺帽OPEN END ACORN NUTS卡車輪胎螺帽OUTER CAP NUTS管用螺帽PIPE NUTS塑膠螺帽PLASTIC NUTSPOP NUTS POP NUTS抑制螺帽PREVAILING TORGUE NUT快速扣件PUSH NUT FASTENERS長方形螺帽(薄型) RECTANGLE JAM NUTS長方四角螺帽RECTANGLE SQUARE NUTS圓螺帽ROUND NUTS自鎖螺帽SELF-LOCKING NUTS制止螺帽SLIDING NUTSSLN-自鎖防鬆螺帽SLN SELF-LOCKING NUTS溝槽螺帽SLOTTED NUTS特殊螺帽SPECIAL NUTS特殊輪轂螺帽SPECIAL WHEEL NUTS彈簧螺帽SPRING NUTS薄型四角螺帽SQUARE JAM NUTS四角螺帽SQUARE NUTS不鏽鋼突緣螺帽STAINLESS STEEL FLANGE NUTS不鏽鋼六角突緣尼龍螺帽STAINLESS STEEL FLANGE NYLON INSERT LOCK NUTS不鏽鋼六角重型螺帽STAINLESS STEEL HEAVY HEX NUTS不鏽鋼六角螺帽STAINLESS STEEL HEX NUTS不鏽鋼螺帽STAINLESS STEEL NUTS不鏽鋼尼龍嵌入螺帽STAINLESS STEEL NYLON INSERT LOCK NUTS不鏽鋼四角螺帽STAINLESS STEEL SQUARE NUTS建築用螺帽STRUCTURAL NUTST形螺帽T NUTS塑膠品之埋植銅,鋁螺帽THREADED INSERTS FOR PLASTIC INJECTION MOULDINGS 鈦螺帽TITANIUM NUTS壓邊螺帽+盤形華司組合TOP LOCK NUT WITH CONICAL WASHER ASSEMBLEU形螺帽U NUTS焊接螺帽WELD NUTS輪轂螺帽WHEEL NUTS蝶形螺帽WING NUTS鋅壓鑄螺帽ZINC DIE CASTING NUTS鋁釘ALUMINUM NAILS馬達軸承軸心組件BEARING SHAFT（MOTOR）軸承軸心BEARING SHAFT開口鉚釘BIFURCATED RIVETS長形拉帽（長型螺帽）BINDER POSTS（ANCHOR NUTS）拉帽BLIND NUTS (RIVET NUTS)拉釘BLIND RIVETS電梯壁虎BOLT ANCHOR金屬黏著橡膠華司（雙層華司）BONDED WASHERS銅釘BRASS NAILSC型扣環C-RINGS小眼釘CEILING HANGER化學壁虎CHEMICAL STUD實心梢CLEVIS PINS & STRAIGHT PINS彈片CLIPS捲釘COIL NAILS冷鍛零件COLD FORMING PART開口梢COTTER PINS洋釘鉤CUP HOOKS弧型華司CURVED WASHER外迫壁虎CUT ANCHOR插梢DOWEL PIN捶釘DRIVE RIVET壁虎DROP IN ANCHORE型環E-RINGS膨脹螺栓EXPANSION ANCHOR BOLTS難眼釘EYELETS RIVETS門鉤GATE HOOKS插溝銷GROOVED PINS有槽鋼釘GROOVED STEEL NAILS火藥釘GUNPOWDER NAILS壁鉤HARDWALL HANGERS雙片夾壁虎HEAVY DUTY SHIELD ANCHOR R型梢HITCH PINS（SNAP PINS）空心釘HOLLOW RIVETS洋釘IRON NAILSJ鉤J HOOKK.D. FITTING K.D. FITTING閂鎖LATCHES & KEEPER ASSEMBLEDS多衝程鉚釘MULTI-STAGE RIVERS錘釘壁虎NAIL IN ANCHOR尼龍壁虎NYLON (METAL) FRAME ANCHOR 塑膠華司NYLON WASHERS其他特殊鉚釘OTHER SPECIAL RIVETS樣品鉤PEGBOARD HOOK吊圖鉤PICTURE HANGERS梢PINS各式管夾,管束PIPE HANGER管塞PIPE PLUG塑膠壁虎PLASTIC NYLON ANCHORSPOP拉釘系列產品POP RIVETS快速插銷QUICK RELEASE PINSR型扣環R-RINGS扣環RINGS鉚釘RIVETS圓棒鐵釘ROUND IRON NAILST型鐵釘ROUND IRON TAPE T NAIL圓棒鋼釘ROUND STEEL NAILST型鋼釘ROUND STEEL TAPE T NAILSU型鋼釘ROUND STEEL TAPE U NAILS橡膠華司RUBBER WASHERSS鉤S HOOKSS型扣環S-RINGS螺旋鋁釘SCREW ALUMINUM NAILS螺旋環(洋眼) SCREW EYES螺旋鉤及螺旋圈SCREW HOOK & SCREW RINGS螺絲鉤SCREW HOOKS螺旋鐵釘SCREW IRON NAILS螺旋鋼釘SCREW STEEL NAILS中空鉚釘SEMI-TUBULAR RIVET套管壁虎SLEEVE ANCHOR實心鉚釘SOLID RIVETS特殊華司SPECIAL WASHERS快速鉚接扣件SPEED RIVETING開叉釘SPLIT DRIVE ANCHORS彈簧梢SPRING PIN彈簧華司SPRING WASHERS彈簧蝴蝶夾SPRING WINGS折釘SQUARE HOOKS不鏽鋼鋼釘STAINLESS STEEL NAILS不鏽鋼中空釘STAINLESS STEEL SEMI-TUBULAR RIVET不鏽鋼斜紋釘STAINLESS STEEL SLANTING STRIPES NAILS 不鏽鋼華司STAINLESS STEEL WASHERS鋼鐵釘STEEL & IRON NAILS鋼釘STEEL NAILSL型鋼釘STEEL TAPE L NAILS鐵馬鉤STORAGE HOOK吸盤鉤SUCTION HANGERS蘭花鉤SWAG HOOKS三角吊鉤SWIVEL LOOP HANGERS地毯鋼釘TACKED IRON NAILS搓牙鐵釘THREAD NAILS大眼釘TIE WIRE SPADE STUD鈦合金鉚釘TITANIUM ALLOY RIVETS鈦合金膨漲螺絲TITANIUM ALLOY EXPANSION BOLTS鈦華司TITANIUM WASHERS齒型華司TOOTH LOCK WASHERS管形鉚釘TUBULAR RIVETS雙向迫緊器TURNBUCKLE節牙鋼釘W/STRIP STEEL NAILS華司WASHERS波浪型華司WAVE WASHER拉漲壁虎WEDGE ANCHOR線圈WIRE鋅合金壁虎ZINC ALLOY FRAME ANCHOR螺絲,螺帽,五金,DIY扣件ALL KINDS OF PACD AGING SERIES 合金鋼工具ALLOY STEEL TOOLS電子手把HANDLES FOR ELECTRONIC DEVICES六角板手HEXAGON KEYS螺絲起子POWER BIT螺絲起子SCREWDRIVER BIT電動螺絲起子AUTOFEED SCREWDRIVER工具套筒組件SOCKET SETS套筒SOCKETS板手WRENCH自動鍊帶螺絲槍AUTOFEED SCREW DRIVER合金鋼線材盤元ALLOY STEEL WIRE ROD鋁合金錠ALUMINUM ALLOY球狀化線材ANNEALING WIRE & ROD黑鐵絲BLACK WIRE黃銅棒線BRASS WIRE & ROD磨光棒鋼BRIGHT STEEL BAR (HEX/ROUND/SQUARE)銅合金線COPPER ALLOY WIRE線切割線 E.D.M CUTTING WIRE快削鋼線材盤元FREE CUTTING STEEL WIRE ROD鍍鋅鐵線GALVANIZED STEEL WIRE線材IRON OR STEEL WIRE線材盤元IRON OR STEEL WIRE ROD洋白銅線NICKEL SILVER WIRE磷青銅線PHOSPHOR BRONZE WIRE各種表面處理用噴砂材料SAND BLASTING MATERIALS不鏽鋼條棒STAINLESS STEEL BAR (ROUND/HEX/SQUARE)不鏽鋼冷鍛線材STAINLESS STEEL COLD HEADING WIRE不鏽鋼線(抽線後) STAINLESS STEEL DRAW WIRE不鏽鋼網線STAINLESS STEEL NET WIRE不鏽鋼特殊線STAINLESS STEEL SPECIAL WIRE不鏽鋼彈簧線STAINLESS STEEL SPRING WIRE不鏽鋼線材STAINLESS STEEL WIRE不鏽鋼線材及盤元STAINLESS STEEL WIRE & ROD棒鋼STEEL BAR(HEX/ROUND/SQUARE)鈦、鋯、鉬、鈮等螺絲、零件、材料TI、ZR、MO、NB PARE METAL BOLTS PARTS鋅合金錠ZINC ALLOY立體/平面雕刻機3D DIE-SINKING MACHINE/ENGRAVING MACHINE轉回90度輾線頭機90°REVOLVING WIRE TWISTING MACHINE乾燥機AIR DRYER氣動拉釘機AIR RIVETER鋁,低合金熔解熱處理爐ALUMINUM & LOW ALLOY MELTING FURNACE鋁散熱器燒焊熱處理爐ALUMINUM BRAZING FURNACE FOR ALUMINUM CONDENSER不鏽鋼線材連續式光輝熱處理退火爐ANNEALING FURNACE SPECIALLY FOR STAINLESS WIRE 小型脫油機ANTI-OIL MACHINE自動包裝機AUTOMATIC PACKING MACHINE螺絲自動檢查設備AUTOMATIC SCREW SORTING MACHINE自動送鎖螺絲機AUTOMATIC SCREWING MACHINE螺絲割尾加工機械AUTOMATIC THREAD SLOTTING MACHINE螺絲製造成型機械AUTOMATIC TRIMMING MACHINE箱式滲碳氮化爐BATCH TYPE CARBURIZING & MITRIDING FURNACE鐘罩式退火(球化)爐BELL TYPE SPHEROIDIZING ANNEALING FURNACE拉帽成型機BLIND NUT FORMERS拉釘打頭機BLIND RIVET HEADING MACHINE螺絲(栓)成型機BOLT FORMERS螺絲、螺帽成型機BOLT FORMERS, NUT FORMERS, HEADERS螺栓模BOLT HEADING DIES螺絲、螺帽熱處理BOLT,NUT & SCREWS HEAT TREATMENT螺絲、螺帽熱處理爐BOLT,NUT & SCREWS HEAT TREATMENT FURNACES圓剪式打頭機BUSH CUT-OFF HEADING MACHINE圓剪式空心打頭機BUSH CUT-OFF HOLLOW HEADING MACHINE主模CARBIDE DIES剪模CARBIDE QUILLS不鏽鋼螺絲,扣件連續式光輝調質淬火爐CARBURIZING FURNACE FOR STAINLESS FASTENER球狀化電氣炖爐CARBURIZING FURNACE,VACUUM & BELL TYPE FURNACE流氣式箱型爐(箱式,坑式,台車式,連續式) CIRCULATION FURNACE (BOX,PIT,TRUCK,CONTINUOUS TYPE) CNC電腦雕刻機CNC ENGRAVING MACHINE捲釘製造機COIL NAIL COLLATOR連續式光輝滲碳,淬火,回火爐CONTINUOUS BRIGHT CARBURIZING & HARDENING FURNACE連續式光輝滲碳淬火爐CONTINUOUS BRIGHT CARBURIZING QUENCHING FURNACE連續式光輝調質淬火爐CONTINUOUS BRIGHT HARDENING QUENCHING FURNACE中,高熱鍍鋅光輝連續爐CONTINUOUS BRIGHT HEAT TREAT FURNACE連續式光輝熱處理爐(不鏽鋼,硬銲) CONTINUOUS BRIGHT TREATMENT (FOR STAINLESS,BRAZING)連續式光輝熱處理爐CONTINUOUS TYPE BRIGHT HEAT TREATMENT FURNACE耐腐蝕表面處理爐(耐鍊) CORROSION RESISTANCE OF SURFACE TREATMENT FURNACE剪刀(螺絲模) CUT-OFF KNIVES集塵設備CYCLONE EQUIPMENT各種碳化鎢製品設計製造DESIGN & MANUFACTURE OF TUNGSTEN CARBIDE PRODUCTS模具DIES & TOOLS鑽尾模DRILL POINT DIES耐衝螺絲成型模具FASTENER FORMING DIES螺絲、螺帽品檢量測儀器FASTENERS INSPECTION AND MEASUREMENTS’INSTRUMENTS精密過濾器FILTER滾溝牙板FLAT KNURLING DIES一般線材,盤元,退火爐GENERAL WIRE,WIRE ROD ANNEALING FURNACE手動拉釘鉗HAND RIVETER倒立式滑落型伸線機HANDSTAND TYPE WIRE DRAWING MACHINE白鐵針HEADER PUNCHES FOR STAINLESS BOLT三角,四角,六角針HEADER PUNCHES IN VARIOUS DRIVES(1)米字,一字,梅花,零號針HEADER PUNCHES IN VARIOUS DRIVES(2)一字六角邊沖頭HEADER PUNCHES IN VARIOUS DRIVES(3)螺絲打頭機HEADING MACHINE六角沖針HEX PINS六角沖模HEX RECESS PUNCHES六角沖模HEX TRIMMING DIES螺絲製造高速搓牙機械HIGH SPEED AUTOMATIC THREAD ROLLING MACHINE高中低週波感應加熱爐HIGH,MEDIUM,LOW FREQUENCY INDUCTION HEATER空心打頭機HOLLOW HEADING MACHINE熱鍛造機HOT FORMER沖銷KNOCKOUT PINS雷射/影像篩選機LASER/OPTICAL SORTING MACHINE FOR SCREWS立式輸送機LOADER機械螺絲牙板MACHINE SCREW THREAD ROLLING DIES PLATES沖床用的沖具MANUFACTURE OF PUNCH FOR PRESS DIE螺絲,螺帽用的沖具MANUFACTURE OF PUNCH MAKING BOLTS AND NUTS迷你成型機MINI-FORMERS鐵釘滾牙機NAIL ROLLING MACHINE鐵釘模具NAILS DIE成品自動收線機NON-STOP COILER精抽自動收線機NON-STOP COILER (SKINPASS)螺帽模NUT FORMING DIES螺帽成型機NUTS FORMERS螺帽攻牙機NUTS TAPPING MACHINE特殊零件成型機PARTS FORMING MACHINE腳踏板系列自動組立專用機PEDAL AUTOMATIC ASSEMBLING MACHINE十字四角複合針PH+SQ COMBINATION PUNCHES四角十字沖模十字沖模PHILLIPS PUNCHES十字割溝沖模PHILLIPS SLOTTED PUNCHES沖針殼PIN HOLDERS鎖用中心零件PINS TAILPIECE拋光機/磨光台POLISHING MACHINE手握式螺絲自動供給鎖緊機PORTABLE SCREW-DRIVING MACHINE粉末治金燒結,黑化爐POWDER METALLURGY & STEAM TREATMENT FURNACE米字沖模POZI PUNCHES沖模PUNCH DIES沖子PUNCH PINS沖針沖床引伸模具PUNCHING DIES羅拉成型機ROLLERS FORMERSRX,DX瓦斯變成爐,AX 氨氣分解爐RX,DX GAS GENERATOR,AX AMMO GAS GENERATOR 鹽浴式熱處理爐SALT BATH HEAT TREATMENT FURNACE各式表面處專用噴砂機SAND BLASTING MACHINE FOR SURFACE TREATMENT螺絲自動組合華司機器SCREW & WASHER ASSEMBLY MACHINE FOR SEMS機(踏)車用螺絲成型機SCREW FOR MOTORCYCLE OR BICYCLE HEADING MACHINE螺絲夾尾模SCREWS TAIL POINT DIES鑽尾螺絲成型機SELF-DRILLING SCREW FORMING MACHINE鑽尾模具SELF-DRILLING SCREW MAKING DIES止付螺絲成型機SET SCREWS FORMERS梅花沖頭SIX LOBE PUNCHES一字沖模SLOT PUNCHES套筒成型機SOCKETS FORMERS碳鋼盤元,線材,球狀化熱處理退火爐SPHEROIDIZING ANNEALING FURNACE FOR STEEL WIRE一般線材,盤元,螺絲合金炖爐SPHEROIDIZING BRIGHT ANNEALING FURNACE球狀化熱理爐SPHEROIDIZING HEAT TREATMENT FURNACE四角孔針具SQ PUNCHES四角沖模SQUARE RECESS PUNCHES不鏽鋼鑽尾螺絲割尾STAINLESS STEEL SELF DRILLING SCREW MILLED POINT鑽子TAP攻牙機TAPPING MACHINE自攻螺絲牙板TAPPING SCREW THREAD ROLLING DIES PLATES螺絲攻、車刀、模具TAPS DIES & TOOLS鐵氟龍(TEFLON)及琺瑯燒付爐TEFLON COATING FURNACE搓牙機鐵屑牙離裝置THREAD CHIP SEPARATOR滾牙輪THREAD ROLLING DIES牙板THREAD ROLLING DIES PLATES螺絲搓手機THREAD ROLLING MACHINE精密油壓滾牙機THREAD ROLLING MACHINES貨物捆綁系統TIE DOWN HARDWARE彈簧機週邊零件TOOLING PERIPHERAL COMPONENT OF SPRING MACHINE六角整頭模TRIMMING DIES HEXAGON碳化鎢模具TUNGSTEN CARBIDE DIEUNILOCK SELF-LOCKING AND SEAL-LOCKING UNILOCK SELF-LOCKING AND SEAL-LOCKING FASTENERS電鍍化學原料VARIOUS ELECTROPLATING CHEMICALS立式單雙層連續伸線機VERTICAL TYPE SINGLE DECK WIRE DRAWING MACHINE溫鍛造機WARM FORMER伸線機WIRES DRAWER特殊鉚合扣件COLLARS (A BLIND FASTENER FOR HUCK INTL)電器銀接點CONTACT POINT螺絲DIY包裝系列DIY SCREWS PACKING SERIES自攻螺紋襯套ENSAT THREAD INSERT螺絲、螺帽成型攻牙專用油FORMING & TAPPING OILS FOR BOLTS & NUTS FORMERS鉸鏈HINGES熱浸鍍鋅螺絲,螺帽HOT DIP GALVANIZING BOLTS & NUTS工業用鍊INDUSTRIAL STEEL LINK CHAINS安全護套K-SERT機車離合器零件MANUFACTURE OF MOTORCYCLE’S CVT PARTS鏡托MIRROR HOLDERS螺絲套筒NUT SETTERS尼龍頭（用於螺絲頭部）NYLON HEAD（FOR SCREWS）尼龍圈（用於防鬆螺帽）NYLON RING（FOR LOCK NUTS）O.E.M. 組件O.E.M. PARTS精密加工元件PRECISE LATHE CUTTING PARTS精密車床零組件PRECISION TURNING PART沖壓零件PUNCHING PARTS螺紋護套RECOIL INSERTS軛鐵(T型鐵、U型鐵) T-YOKE,UNDER YOKE喇叭頭軛鐵U-YOKE,T-YOKE FOR SPEAKER輪子零件WHEEL COMPONENT木螺絲牙板WOOD SCREW DIES。
管道代码
例1 GASKETSGA2301 R-PTFE GASKET, T=3MM, RF, 150 LB, HG20627 80 2 GASKETS为垫片R-PTFE GASKET为聚四氟乙烯垫片T=3MM代表厚度为3毫米RF代表法兰为凸面150 LB中LB代表法兰压力等级，150单位为磅HG20627中HG代表化工标准，20627为标准号80为尺寸2为数量例2 BOLTSCS7402 STUDBOLTS, NUTS, 8.8/8, GB6170/ASMEB16.5, 95.0MM BOLT LENGTHBOLTS为螺栓CS7402代表材质为碳钢STUD为螺柱NUTS为螺帽BOLTS, NUTS, 8.8/8代表螺栓为8.8级，螺帽为8级GB6170/ASME B16.5代表执行国标6170或美标16.595.0MM BOLT LENGTH代表螺栓长度为95毫米例3 V ALVES/IN-LINE ITEMSTFQ41F-150C BALL, OIL FREE, FIRE DESIGN, FLANGE ANMEB16.5, RF, WCB, 150LBV ALVES代表阀门IN-LINE ITEMS代表在线纪录TFQ41F-150C为阀门的规格型号BALL为球阀OIL FREE为脱油FIRE DESIGN代表防火FLANGE ANME B16.5代表法兰执行美标16.5RF代表法兰为凸面WCB代表阀体材料为铸钢150 LB中LB代表法兰压力等级，150单位为磅例4 INSTRUMENT/PIPING SPECIATYLIZA290 INSTRUMENTINSTRUMENT代表仪表PIPING SPECIATY代表管道连接LIZA290中LIZA代表液位计，290为位号例5 FITTINGSCS5005 TEE, SMLS, BW, 20#, GB1245911, S-40 X S-40FITTINGS代表附件CS5005代表材质为碳钢TEE代表三通SMLS代表无缝钢管BW, 20#,中BW代表特殊钢材，20#为特殊钢材的编号例6 SA3011 90 ELL, SWE(A), 3000LB, 0CR18NI9, HG/T21634 SA3011代表美标中不锈钢的一种，与国标中304相近90 ELL代表90°长半径弯头例7 FLANGESCS2213B WELDING NECK, FLANGE, RF, PN 1.6MPA, 20# FLANGES代表法兰CS代表碳钢WELDING NECK代表焊接连接PN 1.6MPA代表最大使用压力为1.6兆帕。
管件英文缩写大全 abbreviations of pipe fittings
管件英文缩写大全abbreviations of pipe fittingsA Anchor 固定ABS 绝对AG 石棉垫片Asbestos gasketAISI American Iron and Steel Institute 美国钢铁学会AL 铝AluminumANNY 退火AnnealedANSI American National Standards Institute 美国国家标准学会API American Petroleum Institute 美国石油学会APP 约、近似ApproximateAPPROX Approximate 大约，近似的APPX 附录AppendixAS 合金钢Alloy steelASB Asbestos 石棉ASI 美国规格学会标准ASME American Society Of Mechanical Engineers美国机械工程师协会ASME 美国机械工程师学会标准Association 美国水工协会ASSY Assembly 装配，组装ASTM American Society Of Testing Material 美国材料实验协会ASTM 美国材料试验协会标准AT 酸洗ATM Atmosphere 大气压AUST 奥氏体不锈钢Austenitic stainless-steelAUT 自动AutomaticAV 角阀AVG 平均AverageAW 电弧焊Arc weldingAWG American Wire Gage 美国线规AWS American Weld Society 美国焊接协会AWS 美国焊接协会标准AWWA American Water WorksB.C Bolted Cover(cap) 螺栓连接的阀兰盖（帽）B.E Bell End 承口BAV 球阀Ball valveB-B Beveled End-Beveled End 两端为坡口端BB Bolted Bonnet 栓柱连接的阀盖BC Bolt Circle 螺栓中心圆BC 螺栓分布圆Bolt circleBCT 螺栓冷紧Bolt cold tighteningBE Beveled End (for weld) 坡口（焊接用）BE 坡口端Beveled endBEDD 基础工程设计数据Basic engineering design dataBEP Both Ends Plain 两端平BET Both Ends Threaded 两端带螺纹BF Blind Flange 盲板法兰BF 法兰盖（日法兰）Blind flange BHY 螺栓热紧Bolt hot tighteningBL Battery Limit 装置区边界BL 装置边界线Battery limit lineBLD Blind 盲板BLDG Building 建筑物BLDG 建筑物BuildingBLF beveled long end 大端开坡口BLK 盲板BlankBM Bill Of Material 材料表BOP Bottom Of Pipe 管底BOP 管底Bottom of pipeBOS 支架底Bottom of supportB-P Beveled End —Plain End 坡口端.平端BRS 黄铜BrassBRZ 青铜BronzeBS 英国国家标准BSE 小端开坡口BU 内外螺纹接头BushingBUV 蝶阀Butterfly valveBV Ball Valve球阀BV Butterfly valve 蝶阀BV 呼吸阀Breather valveBW Butt Weld 对焊BW 对焊Butt weldingBWF butt weld flange 对焊法兰BWG Birmingham Wire Gage 伯明翰线规C Cap 管帽C 保冷Cold insulationC.I Cast Iron 铸铁C.R. Concentric Reducer 同心异径管C.S. Carbon Steel 碳钢C.S. Cold Spring 冷紧C.S.C. Car Seal Close 在关闭状态下封住C.V Check Valve 止回阀CA 腐蚀裕度Corrosion allowanceCAS 中国标准化协会标准CAS 铸钢Cast steelCB 中国造船总公司标准C-C Center to Center 中至中C-E Center to End 中至端面CE 焊条Covered electrodeC-F Center to Face 中至面CH.PL Checkered Plate 花纹钢管CH-OP Chain Operated 链条操纵的CHOP 链条操作Chain operatedCHV 止回阀Check valveCI Cast Iron铸铁CI 铸铁Cast ironCL Class 英制压力等级，等级，种类CL 等级ClassCL 净距（净空）ClearanceCL(屯) 中心线Center lineCLAS 低合金铸钢Cast low alloy steelCLEAR Clearance 间隙CM 色标Colour markCN 建北Construction northCO 清洗口Clean outCOD Continued on Drawing 接续图COFF 围堰CofferdamCOL Column 柱，塔CONC Concentric 同心的CONN Connection 连接，接口CONT.V. Control Valve 控制阀COP 管中心Center of pipeCP 管帽（封头）CapCPL 管箍CouplingCPLG Coupling 管接头，连轴节CR 同心异径管接头（同心大小头）Concentric reducer CS CARBON STEEL 碳钢CS 碳钢Carbon steelCSC 铅封关Car seal closeCSO 铅封开Car seal openCSP 冷紧Cold springCTC 中心至中心Center to centerCTE 中心至端部Center to endCTF 中心至面Center to faceCU 紫铜CopperCUST Customer 客CV Check Valve 止回阀CV 调节阀Control valveCVA 中国阀门行业标准CW 连续焊Continuous weldingD 直径DiameterDEDD 详细工程设计数据Detail engineering design dataDEG Degree 度DF Drain funnel 排液漏斗DF 排液漏斗Drain funnelDI 球墨铸铁Ductile ironDIA Diameter 直径Diaphragm VELVE 隔膜阀DIM Dimension 尺寸DIM 尺寸DimensionDIN 德国国家标准DIS 排出（口）DischargeDISCH Discharge 出口，排出DMF Double Male And Female 双重凹凸DN Down 下DN Nominal Diameter公称直径DN 公称直径Nominal diameterDR Drain 排液DR 排液DrainDRL--double random length (也就是12米左右)DS Directional Stop 定向限为架DTL 详图DetailDV 隔膜阀DWG Drawing 图DWGI 所在图号Drawing identificationDWGNO 图号Drawing numberE 东EastE.R. Eccentric Reducer 偏心异经管EC External Coating 外面涂防腐层ECC Eccentric 偏心EFW Electric Fusion Welded 电容焊的EFW 电熔焊Electric fusion weldingEIT 检查、探伤和实验Examination, inspection & testing EJ （原）核工业部标准EJ 补偿器Expansion jointEL 标高ElevationEL 弯头ElbowEL(ELEV) Elevation 标高；立面ELL Elbow 弯头ELL 长半径弯头Long radius elbowELS 短半径弯头Short radius elbowEQIOP Equipment 设备，装置EQUIV Equivalent 相当的ER 偏心异径管接头（偏心大小头）Eccentric reducer ERW Electric Resistance Welded 电阻焊的ERW PIPE: 是高频直缝焊管ERW 电阻焊Electric Resistance weldingESEW 事故沐浴洗眼器Emergency shower and eye washer EST 蒸汽外伴热External steam tracingET 电伴热Electric tracingETE 端到端End to endEW Eye Washer & Shower 洗眼器及淋浴器EXP.JT Expansion Joint 膨胀节F 现场FieldF/F 现场制造Field fabricatedFF 全平面密封Flate FaceFA 阻火器Flame arresterFC flange cover 法兰盖FCPL 双头管箍Full couplingFDN Foundation 基础FEF 法兰端面Flange and faceF-F Face To Face 面至面FF Flat Faced Or Full Faced 全平面；满平面FF Full Face 平面管道法兰FF 全平面Flat faceFGW Fusion Gas Weld 气熔焊FIG Figure 图FL Floor 楼面FL 楼板FloorFLAS 低合金锻钢Forged low alloy steelFLEX TUBE Flexible Tube 挠性管FLG Flange 法兰FLGD Flanged 法兰式的FLGF Flanged Face 法兰面FM 凹面密封FMG 金属平垫片Flat metallic gasketFOB Flat On Bottom 底面平FOB 底平Flat on bottomFOT Flat On Top 顶面平FOT 顶平Flat on topFP Fix Point 固定点FS Forged Steel 锻钢FS 锻钢Forged steelFSF 法兰密封面Flange scaling faceFTF Fitting To Fitting 管件直连FTF 面到面Face to faceFTG Fitting 管件FURND Furnished 提供的，装设的FW Field Weld 现伤焊FW 现场焊接Field weldingG Guide 导向G 表压G 垫片GasketGA Gage 表，表压，规（线规）GALV Galvanize 镀锌GB 国家标准GB/T 国家推荐标准GBn 国家标准（内部发行）GEAR OP Gear Operated 齿轮传动的GF 槽面Groove faceGJB 国家军用标准GL Ground Level 地面GLV Globe Valve 截止阀GLV 截止阀Globe valveGMAW Gas Metal Arc Weld 金属极惰气体保护焊GR.B.--grade b（B等级）GRD 地坪GroundGSAW 气体保护电弧焊Gas shielded-arc weldingGSKT Gasket 垫片GTAW (Inert)Gas Tungsten Arc Weld 惰性气体保护钨极电弧焊GV Gate Valve 闸阀GV Globe Valve 球心阀GV 闸阀Gate valveGW 气焊Gas weldingH Hanger 吊架H 保温Hot insulationH 高压管、管件及紧固件通用设计标准H 水平HorizontalH.CPLG Half Coupling 半节管接头H.P High Pressure 高压HADT 硬度实验Hardness testingHB 布氏硬度Brinnel hardnessHB 航空工业部标准HC Hose Connection 软管接头HC 软管接头Hose couplerHCPL 单头管箍Half couplingHDR Header 总管HEX Hexagon 六角形HF Hard Alloy Face on阀内件（阀心）HG 化学工业部标准HH Hand Hole 手孔HOR Horizontal 水平的HP 高点High pointHP 高压HS Hose Station 软管HS 软管站Hose stationHT 热处理Heat treatmentHYDT 水压实验Hydraulic testingI.S.B.L Inside Battery Limit 装置边界内恻ID Inside Diameter 内径ID 内径Inside diameterIN Inch 英寸INF 信息（资料）InformationINS Insulation 隔热INS 隔热Thermal insulationINST Instrument 仪表INV Invert (inside bottom of pipe) 管子内底IPS Iron Pipe size 铁管尺寸IR 内定位环Inner ringIR/OR 内外定位环Inner ring and outer ring ISNS Inside screw & Non-rising Stem 内螺纹非升杆ISO Isometric Drawing 周测图（空视图）ISO 国际标准ISRS Inside screw & Rising stem 内螺纹升杆IST 蒸汽内伴热Internal steam tracingJB 机械行业标准（原）机械工业部标准JB/TQ 机械电子工业部通用机械行业内部标准JB/Z （原）机械工业部指导性文件JC 国家建材局标准JIS 日本工业标准JJC 国家计量局标准JOB. No. 工号Job NumberJPI 日本石油学会标准JS Jack Screw 顶开（起）螺栓JT Joint 接头JZ、JG 城乡环境保护部标准L.H.THD Left Hand Thread 左螺纹L.P. Low Pressure 低压LAS 低合金钢Low alloy steelLC Locked Closed 在关闭状态下锁定LC 锁闭Lock closedLD 劳动人事部标准LEP Large end plain 大端为平的LER 透镜式金属环垫Lens ring gasketLET Large end Threaded 大端带螺纹LF 凹面Female faceLG Long 长LGF Lens Gasket Face 透镜垫连接面LIFT Lift Type 升降式LJ Lap Joint 搭接LJ 松套法兰Lapped joint flangeLJF Lap Joint Flange 松套法兰LM 管道混合器Line mixerLM 凸面Male faceLO Locked Open 在开启状态下锁定LO 锁开Lock openLOW 材料表List of materialLP 低点Low pointLP 松套法兰LPI (PT) 液体渗透检验Liquid penetrate inspection (test)LR Long Radius 长半径LRE Long Radius Elbow 长半径弯头LT 斜三通Lateral teeLTG Large Tongue & Groove 大椎槽LW 搭接焊Lap weldingM 金属材料Metallic materialM.L Match Line 连续线M.W. Mineral Wool 矿（物）棉MATL Material 材料MAX Maximum 最大MB Machine Bolt 机器螺栓（单头）MEL 斜接弯头（虾米腰弯头）Mitre elbowMF Male and Female 凸和凹MF Manufacture 制造厂MFF 凹凸面Male and female faceMFG Manufacture 制造MFM female and male flange 凹凸法兰MG 金属垫片Metallic gasketMH Manhole 人孔MHR 工时Man hourMI Malleable Iron 可锻铸铁MI 可锻铸铁Malleable ironMIL 美国军用标准MIN Minimum 最小MJ Mechanical Joint 机械接头MJG 金属包垫片Meta-jacket gasketML 接续分界线Match lineML 手动Manual controlMO 混合孔板Mixing orificeMPI (MT) 磁粉探伤Magnetic particle inspection (test)MSS Manufacturers Standardization Society of the Valve and Fittings Industry, Inc. 美国阀门和管件制造商标准化协会MSS 美国阀门和管件制造厂标准化协会标准MT 煤炭工业部标准MTO Material take-off 材料统计汇料MW Minimum Wall 最小壁厚N 北NorthN.B. Non-Bonnet 无阀盖NACE MR-0175--是一种防腐的标准NB Nominal Bore 公称孔径NC Normally Closed 常闭NC 正常关Normally closeNF neck flange 带颈法兰NF 法国国家标准NIP Nipple 短管NIP 短节Pipe nipple or straight nippleNMG 非金属垫片Non-metallic gasketNO INS No Insulation 不隔热NO Normally Open; 常开NOM Nominal 公称的；额定的NOZ Nozzle 管口NPS Nominal Pipe Size 公称管径NPS 美国标准直管螺纹National standard straight pipe thread NPSH Net Positive Suction Head 净正吸入压头NPT American National Taper 美国锥管螺纹Pipe Thread NPT 美国标准锥管螺纹National standard taper pipe thread NS Nominal Size 公称直径NU 螺母NutNV Needle Valve 针形阀NV 针形阀Needle valveOCR 八角形金属环垫Octagonal ring gasketOD Outside Diameter 外径OET One end Threaded 一端带螺纹OR Outside Radius 外半径OR 外定位环Outer ringORF Orifice 孔板ORIENT Orientation 方位OS & Y Outside Screw and Yoke 外螺纹阀杆和阀轭OSNB Outside Screw Non-Bonnet 外螺纹无阀盖OVR 椭圆形金属环垫Oval ring gasketP Plug 堵头P 防烫伤隔热Personnel protection insulationP 管子PipeP 压力PressureP.C.D. Pitch Circle Diameter 节圆直径PAP Piping Arrangement Plan 管道布置平面图P-B Plain End –Bevel End 平端—坡口端PB Pressure Seal Bonnet 压力密封的阀盖PBE 两段平端PC Pressure Seal Cap 压力密封的阀帽PD 清扫设施Purge devicePE Plain End (not beveled) 平端（无坡口）PE plain end 平端PE 平端面Plain end 1PF 平台PlatformPFD 工艺流程图Process flow diagramPH 预热PreheatingPJ/PR(或PJ/RJ) 活套环法兰PID Piping & Instrument Diagram管道及仪表流程图PID 管道和仪表流程图Piping & instrument diagram PL 管堵（丝堵）PlugPL 板式法兰PlatePLE plain small end 小端平端PLE 大端坡口PLG 法兰FlangePN Nominal Pressure 公称压力PN Plant North 工厂北向PN 公称压力Nominal pressurePNET 气压实验Pneumatic testingPOS point of Support 支承点P-P Plain End—Plain End 两端为平端PR 管桥Pipe rackPREP Preparation 加工准备PRV 泄压阀Pressure relief valvePS 管道支架（管架）Piping supportPSIA Pounds Per Square Inch Absolute 磅/PSIG Pounds Per Square Inch Gage 磅/PSL是表示该项下的管线管所使用的技术规范等级: PT Point 点PT 池PitPT.EL 点标高Point elevationPT.NO Part No. 件号PTFE Polytetrafluoroethylene 聚四氟乙烯PV Plug Valve 旋塞阀PV 旋塞阀Plug valve (cock)PVC Poly Vinyl Chloride 聚氯乙烯PWHT 焊后热处理Post weld heat treatmentQ/TH （原）机械工业部化工通用机械专业标准QB、SG 轻工业部标准QJ 航天工业部标准QTY Quantity 数量R Radius 半径R 异径管接头（大小头）ReducerR.E 偏心异径管R.H.THD Right Hand Thread 右螺旋RC Conc.reducer 同心大小头RC 洛氏硬度RCPL 异径管箍Reducing couplingRD 爆破片（爆破膜）Rupture diskRE Ecc.reducer 偏心大小头RED Reducer 异径管REDF 异径法兰Reducing flangeREF DWG 参考图Reference drawingREF Reference 参考REINF Reinforce 加强REL 异径弯头Reducing elbowREQD Required 需要；申请REV Revision 修改REV. No. 修改号Revision numberRF Raised Face 凸面RF Raised Face 凸面管道法兰凸面RG Ring Gasket 环形垫片RG 橡胶垫片Rubber gasketRI (RT) 射线探伤Radiographic inspection (test) RJ Ring Joint Face 环连接面管道法兰环连接面RJ Ring Joint 环垫接头RJ 环连接面Ring joint faceRJ 梯型槽密封Ring JointRO Restriction Orifice 限流孔板RO 限流孔板Restriction orificeRP 补强板Reinforcing padRPM Revolutions Per Minute 转/分RPS Revolutions Per Second 转/秒RS Resting Support 支承架，滑动架RT 异径三通Reducing teeRTG （压力）等级RatingRTJ Ring Type Joint（见RJ）RV Relief Valve 安全泄液阀RV 减压阀Pressure reducing valveS Spring 弹簧（管架用）S 南SouthSAW (Automatic)Submerged Arc Weld 自动埋弧焊SAW PIPE: 是高频埋弧焊管SB 8字盲板Spectacle blind (blank)SB Screwed Bonnet 螺纹阀盖SB Stud Bolt 双头螺栓SB 螺柱Stud boltSC Sample Cooler 取样冷却器SC 采样接口Sample connectionSC 取样冷却器Sample coolerSCH Schedule 管壁厚系列号SCH 表号Schedule numberSCH40--管件的壁厚SCRD Screwed 螺纹SD 水力电力部标准SE 翻边短节Stub endSEP Small end Plain 小端为平的SEQ 序号（顺序）SequenceSET Small end Threaded 小端带螺纹SEW 密封焊Seal weldingSF Semi-Finished 半光SF Slip on flange 平焊法兰SF 现场决定Suit in fieldSFG 堆焊SurfacingSG Sight Glass 视镜SG 视镜Slight glassSGV 插板阀SH Surface Hard Facing 硬质密封面SHLT 棚ShelterSIL 消声器SilencerSJT 蒸汽夹套伴热Steam-jacket tracingSK Sketch 草图SM SEAMLESS PIPE--无缝管件SMAW Shielded Metal Arc Weld 有保护的金属电弧焊SMG 半金属垫片Semi metallic gasketSMLS Seamless 无缝SMSG 齿形金属垫片Solid metal serrated gasketSN Swaged Nipple 异径短管SNIP 异径短节Swaged nippleSO Slip –On 滑套SO 蒸气吹扫（口）Steam outSOF Slip –On Flange 滑套法兰SOF 平焊法兰Slip-on flangeSPDWG(ISODWG) 管段图Spool drawing (each line isometric drawing) SPEC Specification 规定，说明SPL Sound Pressure Lever 升压水准SPR 气液分离器SeparatorSQ Square 方的，平方SR Shout Radius 短半径SR 短半径SR 过滤器StrainerSR 应力消除Stress reliefSRB 桶式过滤器Bucket type strainerSRE Short Radius Elbow 短半径弯头SRFF Socket Raised Face Flange 承插凸面法兰SRT T型过滤器T-type strainerSRY Y型过滤器Y-type strainerSS Stainless Steel 不锈钢SS 不锈钢Stainless steelST Steam Trap 蒸汽疏水阀ST 蒸汽疏水阀Steam trapSTD Standard 标准STD 标准StandardSTG Small Tongue & Groove 小椎槽面STL Steel 钢STM Steam 蒸汽STM.TR Steam Tracing 蒸汽拌热STRU 构架（构筑物）StructureSUC 吸入（口）SuctionSUCT Suction 吸入口SV Safety Valve 安全泄气阀SV 安全阀Safety valveSW Socket Weld 承插焊SW 承插焊Socket weldingSWF 承插焊法兰Socket-welding flangeSWG Swage 锻造，模锻SWG 缠绕式垫片Spiral wound gasketSWMG Swing Type 旋启式SWSR 弹簧垫圈Spring washerSY （原）石油部标准SYM Symmetrical 对称的SYM 对称的SymmetricalT Tee 三通T 管道伴热（冷）TracingT 螺纹法兰Threaded flangeT 温度TemperatureT&I 伴热Tracing and insulationTC Tee (C ) 等径三通TE Threaded End 螺纹端TEG 聚四氟乙烯包复垫片PTFE envelope gasket TEMP Temperature 温度TF 榫面Tongue faceTG Tongue & Groove 椎槽TG 榫槽面Tongue and groove faceTG 槽面密封THD Threaded 螺纹的TH 螺纹法兰TH Threaded 螺纹的THK Thickness 厚度THR 螺纹ThreadTL Tangent Line 切线TN True North 真实北向TR Tee ( R ) 异径三通TOC Top of Concrete 混凝土北向Top of Steel 钢结构顶面TOP Top of pipe 管顶TOS Top of Support 支架顶面TSR 临时过滤器Temporary strainerTW 定位焊Tack weldingTWV 三通阀TYP Typical 典型的UB Union Bonnet 带活接头的阀盖UC Union Cap 带活接头的阀帽UC 公用工程接头Utility connection 1UG 地下UndergroundUI (UT) 超声探伤Ultrasonic inspection (test) UN Union 活接头UTL 公用系统UtilityV Valve 阀V 竖直、铅直、直立VerticalVAC Vacuum 真空VAR Variable 可变的VE 外观检查Visual examinationVERT Vertical 垂直的VOL Volume 卷，册，容量，体积VT vent 放空放气W 焊接WeldingW 西WestW.P. Working Point 工作点W/E 设备带来With equipmentW/I 仪表带来With instrumentWB Weld Branch 焊接支管WC Weld Cap 焊接管帽WD Width 宽度WE Weld End 焊接端WL Weld Line 焊接线WN Weld Neck 对焊法兰（颈部）WNF Weld Neck Flange 对焊法兰WNF 对焊法兰Welding neck flangeWP Working Pressure 工作压力WSR 垫圈WasherWT Wall Thickness 壁厚WT 重量WeightWW 焊丝Welding wireXH Extra Heavy 加强的，加厚的XS Extra Strong 加强的XXH Double Extra Heavy 双倍加强（厚）的XXS Double Extra Strong 双倍加强的XXS 特强Double extra strongYB 冶金部标准YP Yield Point 屈服点ZB 行业标准（专业标准）ZBn 行业标准（内部发行）ZJB 专业军用标准。
紧固件常用英语单词
中文名称 英文名称六角螺丝(栓) HEX HEAD CAP SCREWS(HEX BOLTS)六角机械螺丝 HEX HEAD MACHINE BOLTS六角木牙螺丝 HEX LAG BOLTS四角螺丝 SQUARE HEAD BOLTST头螺丝 T HEAD BOLTS马车螺丝 CARRIAGE BOLTS环首螺丝 EYE BOLTS内六角孔螺丝 HEX SOCKET CAP SCREWS固定螺丝 SET SCREWS螺椿栓 STUD BOLTS螺旋椿 SCREW STUDS轮壳螺栓 WHEEL BOLTS翼形螺丝 WING SCREWS自攻螺丝 SELF TAPPING SCREWS自削螺丝 THREAD CUTTING SCREWS钻尾螺丝 SELF DRILLING SCREWS旋入螺丝 DRIVE SCREWS机械螺丝 MACHINE SCREWS木螺丝 WOOD SCREWS家具螺丝 FURNITURE SCREWS塑板螺丝 CHIPBOARD SCREWS墙用螺丝 DRYWALL SCREWS基础螺栓 FOUNDATION BOLTSU型螺栓 U BOLTS勾头螺栓 HOOK BOLTS套挂螺丝 TOGGLE BOLTS突缘螺丝 FLANGE BOLTS轨道螺栓(鱼尾螺丝) TRACK BOLTS耐候钢螺丝 CORTEN STEEL HEAVY HEX BOLTS扭矩控制螺栓 T.C.BOLTS高张力螺栓 HIGH STRENGTH BOLTS剪力钉(焊接螺丝) WELDING STUDS螺丝附华司组合 SCREWS AND WASHERS ASSEMBLED(SEMS)大尺寸螺栓 BIG SIZE BOLTS不锈钢小螺丝 STAINLESS STEEL SHEET METAL SCREWS不锈钢大螺丝 STAINLESS STEEL BOLTS铜螺丝 BRASS SCREWS铝螺丝 ALUMINUM SCREWS合金钢螺丝 ALLOY STEEL SCREWS电子螺丝 ELECTRONIC SCREWS微小精密螺丝 MICRO SCREWS塑料螺丝 PLASTIC SCREWS复合材料用螺丝 PARTICLE BOARD SCREWS钛合金螺丝 TITANIUM ALLOY BOLTS钛、锆、钼、铌等螺丝、零件、材料 TI,ZR,MO,NB PARE METAL BOLTS PARTS 拇指螺丝 THUMB SCREWS双头牙螺丝 DOUBLE END SCREWS HANGER BOLT车辆(汽车)螺丝、螺帽 AUTOMOTIVE FASTENERS航天用螺丝 AEROSPACE FASTENERS飞机特殊扣件 SOURCE CONTROL BOLTS拉栓 BLIND BOLTS面板螺丝 PANEL FASTENERS电梯螺丝 ELEVATOR BOLTS四角头固定螺丝 SQUARE SET SCREWS大头马车螺丝 STEP BOLTS单向螺丝 ONE WAY LAG SCREWS管夹螺丝 HOSE CLAMP SCREWS不锈钢固定螺丝 STAINLESS STEEL HEX SOCKET CAP SCREWS不锈钢内六角螺丝 STAINLESS STEEL HEX SOCKET CAP SCREWS铰链螺丝 HINGE SCREWS货柜螺丝 CONTAINER SCREWS复合材料钻尾螺丝 BI-METAL SELF DRILLING SCREWS三角牙螺丝 TRILOBULAR THREAD SCREWS高低牙螺丝 HIGH LOW SCREWS夹板用螺丝 PARTICLE BOARD SCREWS马桶螺丝 TOILET CLOSET BOLTS特长螺丝 SPECIAL LONGER SCREWS建业螺丝 BUILDING FASTENERS不锈钢六角螺丝 STAINLESS STEEL HEX SOCKET CAP SCREWS其它特殊螺丝 SPECIAL SCREWS OR BOLTS不锈钢特殊螺丝 SPECIAL STAINLESS STEEL SCREWS宽牙螺丝（粗牙螺丝） COARSE THREAD SCREWS链带螺丝 COLLATED SCREWS水泥螺丝 CONCRETE SCREWS板模螺丝 CONSTRUCTION BOLTS锌蝶螺丝 DIE CAST WING SCREWS; ZINC ALLOY重型车螺丝 HEAVY DUTY WHEEL HUB BOLTS内六角固定螺丝 HEX SOCKET SET SCREWS复合材料用螺丝（夹板用） PARTICLE BOARD SCREWS犁壁螺丝 PLOW BOLTS机(踏)车用螺丝、轴心 SCREWS AND SHAFTS FOR MOTORCYCLE OR BICYCLE 针车用螺丝、轴心 SCREWS AND SHAFTS FOR SEWING MACHING止付螺丝 SOCKET SET SCREWS不锈钢宽牙螺丝 STAINLESS STEEL COARSE THREAD SCREWS不锈钢高低牙螺丝 STAINLESS STEEL HIGH-LOW THREAD SCREWS不锈钢机械螺丝 STAINLESS STEEL MACHINE SCREWS不锈钢钻尾螺丝 STAINLESS STEEL SELF DRILLING SCREWS不锈钢自攻螺丝 STAINLESS STEEL SELF TAPPING SCREWS不锈钢自削螺丝 STAINLESS STEEL THREAD CUTTING SCREWS不锈钢三角牙螺丝 STAINLESS STEEL TRI-LOBULAR THREAD SCREWS不锈钢木螺丝 STAINLESS STEEL WOOD SCREWS套挂螺栓及螺丝 TOGGLE BOLTS钛合金膨胀螺丝 TITANIUM ALLOY EXPANSION BOLTS中文名称 英文名称六角盖头螺帽 HEX CAP NUTS六角锯齿螺帽 HEX SERRATED NUTS六角轮缘螺帽 HEX FLANGE NUTS高脚螺帽 HEX COUPLING NUTS(HIGH NUTS)圆螺帽 ROUND NUTS四角螺帽 SQUARE NUTS管用螺帽 PIPE NUTS轮壳螺帽 WHEEL NUTS蝶型螺帽 WING NUTSU形螺帽 U NUTST形螺帽 T NUTS环首螺帽 EYE NUTS齿形螺帽 KEP NUTS齿花螺帽 CLINCH NUTS耐候钢六角重型螺帽 CORTEN STEEL HEAVY HEX NUTS焊接螺帽 WELD NUTS高张力螺帽 HEIGH STRENGTH NUTS建业用螺帽 STRUCTURAL NUTS不锈钢螺帽 STAINLESS STEEL NUTS铜螺帽 BRASS NUTS铝螺帽 ALUMINUM NUTS合金钢螺帽 ALLOY STEEL NUTS重型车螺帽 HEAVY DUTY WHEEL HUB NUTS铁器焊接袋帽 ACORN CAP NUTS金属预置扭矩式螺帽 ALL-METAL PREVAILING TORQUE TYPE NUTS壁虎螺帽 ANCHOR NUTS大尺寸螺帽 BIG SIZE NUTS铁盖袋帽 CLOSED END ACORN NUTS盘形华司螺帽 CONICAL WASHER NUTS铁盖+尼龙圈组合盖帽 DIN 986 DOMED CAP NUTS突缘尼龙盖帽 FLANGE NYLON INSERT LOCK NUTS平面华司螺帽 FLAT WASER NUTS六角割沟螺帽 HEX SLOTTED NUT自锁螺帽 SELF-LOCKING NUTS制止螺帽 SLIDING NUTSSLN-自动防松螺帽 SLN SELF-LOCKING NUTS其它特殊螺帽 SPECIAL NUTS弹簧螺帽 SPRING NUTS不锈钢突缘螺帽 STAINLESS STEEL FLANGE NUTS不锈钢六角轮缘尼龙螺帽 STAINLESS STEEL FLANGE NYLON INSERT LOCK NUTS 不锈钢六角重型螺帽 STAINLESS STEEL HEAVY HEX NUTS不锈钢六角螺帽 STAINLESS STEEL HEX NUTS不锈钢尼龙嵌入螺帽 STAINLESS STEEL NYLON INSERT LOCK NUTS锌压属螺帽 ZINC DIE CASTING NUTS普通六角螺帽 HEX NUTS六角重型螺帽 HEAVY HEX NUTS薄型螺帽 HEX JAM NUTS尼龙嵌入防松螺帽 NYLON INSERT LOCK NUTS机械螺丝用六角螺帽 HEX MACHINE SCREW NUT中文名称 英文名称合金钢线材盘元 ALLOY STEEL WIRE ROD球状化线材 ANNEALING WIRE AND ROD黑铁丝 BLACK WIRE黄铜棒线 BRASS WIRE AND ROD磨光棒钢 BRIGHT STEEL BAR(HEX/ROUND/SQUARE)铜合金线 COPPER ALLOY WIRE线切割线 E.D.M CUTTING WIRE快削钢线材盘元 FREE CUTTING STEEL WIRE ROD线材 IRON OR STEEL WIRE线材盘元 IRON OR STEEL WIRE ROD洋白铜线 NICKEL SILVER WIRE磷青铜线 PHOSPHATE BRONZE WIRE不锈钢条棒 STAINLESS STEEL BAR(ROUND/HEX/SQUARE)不锈钢冷锻线材 STAINLESS STEEL COLD HEA DING WIRE不锈钢线(抽线后) STAINLESS STEEL DRAW WIRE不锈钢线材 STAINLESS STEEL WIRE不锈钢线材及盘元 STAINLESS STEEL WIRE AND ROD棒钢 STEEL BAR(HEX/ROUND/SQUARE)转回90度碾线头机 90讧EVOLVING WIRE TWISTING MACHINE气动拉钉机 AIR RIVETER各式螺丝类产品自动包装 AUTOMATIC PACKAGING FOR ALL KINDS OF PACKAGING 自动包装机 AUTOMATIC PACKING MACHINE螺丝制造搓牙机械 AUTOMATIC THREAD ROLLING MACHINE螺丝割尾加工机械 AUTOMATIC THREAD SLOTTING MACHINE螺丝制造成型机械 AUTOMATIC TRIMMING MACHINE拉钉打头机 BLIND RIVET HEADING MACHINE螺丝、螺帽成型机 BOLT FORMERS,NUTS FORMERS,HEADERS螺丝、螺帽热处理 BOLT NUT AND SCREWS HEAT TREATMENT螺丝、螺帽热处理炉 BOLT NUT AND SCREWS HEAT TREATMENT FURNACES球状化电器炖炉 CARBURIZING FURNACE VACUUM AND BELL TYPE FURNACE超防锈复合瓷膜 CERAMIC COATING连续式光辉渗碳淬火炉 CONTINUOUS BRIGHT CARBURIZING QUENCHING FURNACE 连续式光辉调质淬火炉 CONTINUOUS BRIGHT HARDENING QUENCHING FURNACE 中、高热镀锌光辉连续炉 CONTINUOUS BRIGHT HEAT TREAT FURNACE连续式光辉热处理炉 CONTINUOUS TYPE BRIGHT HEAT TREATMENT FURNACE 螺丝割尾及特殊割遘加工 MACHINE SCREW SHANK SLOTTING螺丝钻孔加工 SCREW SHANK DRILLING鸡眼上下模 EYELETS DIES一般线材、盘元、退火炉 GENERAL WIRE,WIRE ROD,ANNEALING FURNACE 倒立式滑落型伸线机 HANDSTAND TYPE WIRE DRAWING MACHINE十字冲模 HEADER PUNCHES IN VARIOUS DRIVES成型冲模 HEADER PUNCHES IN VARIOUS DRIVES螺丝打头机 HEADING MACHINE螺丝制造高速搓牙机械 HIGH SPEED AUTOMATIC THREAD ROLLING MACHINE高中低周波感应加热炉 HIGH,MEDIUM,LOW FREQUENCY INDUCTION HEATER空心打头机 HOLLOW HEADING MACHINE热浸镀锌螺丝、螺帽 HOT DIP GALVANIZING BOLTS AND NUTS机械镀锌 MECHANICAL GALVANIZED迷你成型机 MINI-FORMERS成品自动收线机 NON-STOP COILER精抽自动收线机 NON-STOP COILER(SKINPASS)螺帽模 NUT FORMING DIES螺帽成型模 NUTS FORMERS特殊零件成型机 PARTS FORMING MACHING冲模 PUNCH DIES冲子 PUNCH PINS罗拉成型机 ROLLERS FORMERS机(踏)车用螺丝成型机 SCREW FOR MOTORCYCLE OR BICYCLE HEA DING MACHINE止付螺丝成型机 SET SCREWS FORMERS套高成型机 SOCKETS FORMERS一般线材、盘元、螺丝合金炖炉 SPHEROIDIZING BRIGHT ANNEALING FURNACE球状化热处理炉 SPHEROIDIZING HEAT TREATMENT FURNACE攻牙机 TAPPING MACHINE螺丝攻、车刀、模具 TAPS DIES AND TOOLS搓牙机铁屑分离装置 THREAD CHIP SEPARATOR滚牙轮 THREAD ROLLING DIES牙板 THREAD ROLLING DIES PLATES精密油压滚牙机 HYDRAULIC THREAD ROLLING MACHINES模具 TOOLS六角整头模 TRIMMING DIES HEXAGAN碳化钨模具 TUNGSTEN CARBIDE DIE镀钛处理(TiN)专业加工服务 TiN HARD COATING FOR CUTTING TOOLS AND PUNCH BY PVD 电镀化学原料 VARIOUS ELECTROPLATING CHEMICALS环规校正 CALIBRATION FOR RING GAGE环规、牙规、三线规校正 CALIBRATION FOR RING GAGE, ATHREAD GAGE, 3 WIRE GAGE螺丝、螺帽品检量测仪器 FASTENERS INSPECTION AND MEASUREMENT INSTRUMENTS螺丝、螺帽成型攻牙专用油 FORMING AND TAPPING OILS FOR BOLTS AND NUTS FORMERS螺丝、螺帽五金等检验 INSPTECTION SERVICES FOR FASTENERS AND HARDWARE德国SCHATZ扭力机代理 REPRESENTATIVE OF SCHATZ TORQUE MACHINISO质量保证系统 ISO QUALITY ASSURANCE SYSTEM生产管理系统 PRODUCTION CONTROL SYSTEM物料管理系统 MATERIAL CONTROL SYSTEM中文名称 英文名称齿轮 GEARS不锈钢牙条棒 STAINLESS STEEL HREAD ROD马达轴承轴心组件 BEARING SHAFT(MOTOR)轴承轴心 BEARING SHAFT开口铆钉 BLIND RIVETS长形拉帽 BLIND RIVET NUTS拉帽 BLIND NUTS拉钉 BLIND RIVETS实心梢 CLEVIS PINS AND STRAIGHT PINS弹片 CLIPS卷钉 COIL NAILS冷锻零件 COLD FORMING PART开口销 COTTER PINSE型环 E-RINGS膨胀螺栓 EXPANSION ANCHOR BOLTS鸡眼钉 EYELETS RIVETSR型销 SNAP PINS闸、锁 LATCHES AND KEEPER ASSEMBLEDS其它特殊铆钉 OTHER SPECIL RIVETS销 PINS格式管夹、管束 PIPE HANGER铆钉 RIVETS螺旋锔及螺旋圈 SCREW HOOK AND SCREW RINGS中空钉 SEMI-TUBULAR RIVET开叉钉 SPLIT DRIVE ANCHORS弹簧华司 SPRING WASHERS弹簧蝴蝶夹 SPRING WINGS不锈钢华司 STAINLESSSTEEL WASHERS钢铁钉 STEEL AND IRON NAILS搓牙铁钉 THREAD NAILS钛合金铆钉 TITAIUM ALLOY RIVETS管形铆钉 TUBULAR RIVETS华司 WASHERS真空热处理 VACUUM HEAT TREATMENT螺丝、螺帽、五金、DIY扣件 FASTENERS合金钢工具 ALLOY STEEL TOOLS螺栓模 BOLT HEA DING DIES手动拉钉钳 HAND RIVETER船舶链 ANCHOR CHAIN脚踏车链锁 BICYCLE CHAIN LOCKS螺丝起子 BIT罗拉 CHAIN ROLLER特殊铆合扣件 COLLARS(A BLINDFASTENER FOR HUCK INTL)装饰链 DECORATIVE CHAINS自攻螺纹衬套 ENSAT THREADED INSERTS六角扳手 HEXAGON KEYS超音螺纹压入式螺纹自动锁扣 THREADED INSERTS FOR PLASTIC INJECTION MOULDEINGS 汽车特殊杆接件 SPECIAL AUTO-MOBILE FASTENER AS YOUR NEEDS螺纹护套 RECOIL INSERTS链条用滚子 ROLLER FOR ROLLER CHAIN金属板镶嵌组件及自动夹扣组件 SHEET METAL FASTENERS工具套筒组件 SOCKET WRENCH SETS不锈钢链 STAINLESS STEEL CHAINS轭子 T-YOKE轮胎链 TIRE CHAINS狗链 DOG CHAINS喇叭头轭铁 U-YOKE,T-YOKE FOR SPEAKER不锈钢输送带轮用轨道 STAINLESS WHEEL'S RACK FOR TRANSPORTER 工业用链 INDUSTRIAL STEEL LINK CHAINS拖链安全链 TOW CHAINS AND SAFETY CHAINS机车离合器零件 MANUFACTURE OF MOTORCYCLE'S CVT PARTS牙条棒 THREAD ROD。
螺丝专业英语
六角螺丝(栓) HEX HEAD CAP SCREWS(HEX BOLTS)六角机械螺丝HEX HEAD MACHINE BOLTS六角木牙螺丝HEX LAG BOLTS四角螺丝SQUARE HEAD BOLTST头螺丝T HEAD BOLTS马车螺丝CARRIAGE BOLTS环首螺丝EYE BOLTS内六角孔螺丝HEX SOCKET CAP SCREWS固定螺丝SET SCREWS螺椿栓STUD BOLTS螺旋椿SCREW STUDS轮壳螺栓WHEEL BOLTS翼形螺丝WING SCREWS自攻螺丝SELF TAPPING SCREWS自削螺丝THREAD CUTTING SCREWS钻尾螺丝SELF DRILLING SCREWS旋入螺丝DRIVE SCREWS机械螺丝MACHINE SCREWS木螺丝WOOD SCREWS家具螺丝FURNITURE SCREWS塑板螺丝CHIPBOARD SCREWS墙用螺丝DRYWALL SCREWS基础螺栓FOUNDATION BOLTSU型螺栓U BOLTS勾头螺栓HOOK BOLTS套挂螺丝TOGGLE BOLTS突缘螺丝FLANGE BOLTS轨道螺栓(鱼尾螺丝) TRACK BOLTS耐候钢螺丝CORTEN STEEL HEAVY HEX BOLTS扭矩控制螺栓T.C.BOLTS高张力螺栓HIGH STRENGTH BOLTS剪力钉(焊接螺丝) WELDING STUDS螺丝附华司组合SCREWS AND WASHERS ASSEMBLED(SEMS) 大尺寸螺栓BIG SIZE BOLTS不锈钢小螺丝STAINLESS STEEL SHEET METAL SCREWS不锈钢大螺丝STAINLESS STEEL BOLTS铜螺丝BRASS SCREWS铝螺丝ALUMINUM SCREWS合金钢螺丝ALLOY STEEL SCREWS电子螺丝ELECTRONIC SCREWS微小精密螺丝MICRO SCREWS塑胶螺丝PLASTIC SCREWS复合材料用螺丝PARTICLE BOARD SCREWS钛合金螺丝TITANIUM ALLOY BOLTS钛、锆、钼、铌等螺丝、零件、材料TI,ZR,MO,NB PARE METAL BOLTS P ARTS拇指螺丝THUMB SCREWS双头牙螺丝DOUBLE END SCREWS HANGER BOLT车辆(汽车)螺丝、螺帽AUTOMOTIVE FASTENERS航太用螺丝AEROSPACE FASTENERS飞机特殊扣件SOURCE CONTROL BOLTS拉栓BLIND BOLTS面板螺丝PANEL FASTENERS电梯螺丝ELEVATOR BOLTS四角头固定螺丝SQUARE SET SCREWS大头马车螺丝STEP BOLTS单向螺丝ONE WAY LAG SCREWS管夹螺丝HOSE CLAMP SCREWS不锈钢固定螺丝STAINLESS STEEL HEX SOCKET CAP SCREWS不锈钢内六角螺丝STAINLESS STEEL HEX SOCKET CAP SCREWS铰链螺丝HINGE SCREWS货柜螺丝CONTAINER SCREWS复合材料钻尾螺丝BI-METAL SELF DRILLING SCREWS三角牙螺丝TRILOBULAR THREAD SCREWS高低牙螺丝HIGH LOW SCREWS夹板用螺丝PARTICLE BOARD SCREWS马桶螺丝TOILET CLOSET BOLTS特长螺丝SPECIAL LONGER SCREWS建业螺丝BUILDING FASTENERS不锈钢六角螺丝STAINLESS STEEL HEX SOCKET CAP SCREWS其它特殊螺丝SPECIAL SCREWS OR BOLTS不锈钢特殊螺丝SPECIAL STAINLESS STEEL SCREWS宽牙螺丝（粗牙螺丝）COARSE THREAD SCREWS链带螺丝COLLATED SCREWS水泥螺丝CONCRETE SCREWS板模螺丝CONSTRUCTION BOLTS涞□萁z DIE CAST WING SCREWS; ZINC ALLOY重型车螺丝HEAVY DUTY WHEEL HUB BOLTS内六角固定螺丝HEX SOCKET SET SCREWS复合材料用螺丝（夹板用）PARTICLE BOARD SCREWS犁壁螺丝PLOW BOLTS机(踏)车用螺丝、轴心SCREWS AND SHAFTS FOR MOTORCYCLE OR BI CYCLE针车用螺丝、轴心SCREWS AND SHAFTS FOR SEWING MACHING止付螺丝SOCKET SET SCREWS不锈钢宽牙螺丝STAINLESS STEEL COARSE THREAD SCREWS不锈钢高低牙螺丝STAINLESS STEEL HIGH-LOW THREAD SCREWS不锈钢机械螺丝STAINLESS STEEL MACHINE SCREWS不锈钢钻尾螺丝STAINLESS STEEL SELF DRILLING SCREWS不锈钢自攻螺丝STAINLESS STEEL SELF TAPPING SCREWS不锈钢自削螺丝STAINLESS STEEL THREAD CUTTING SCREWS不锈钢三角牙螺丝STAINLESS STEEL TRI-LOBULAR THREAD SCREWS 不锈钢木螺丝STAINLESS STEEL WOOD SCREWS套挂螺栓及螺丝TOGGLE BOLTS钛合金膨胀螺丝TITANIUM ALLOY EXPANSION BOLTS。
DIN 976_1-2002 螺栓.第1部分米制螺纹(英文版1
ICS 21.040.10; 21.060.10Gewindebolzen – Teil 1: Metrisches GewindeIn keeping with current practice in standards published by the International Organization for Standardization (ISO), a comma has been used throughout as the decimal marker.DEUTSCHE NORM December 2002976-1{Translation by DIN-Sprachendienst.In case of doubt, the German-language original should be consulted as the authoritative text.Metric thread stud boltsContinued on pages 2 to 7.ForewordThis standard has been prepared by Technical Committee Verbindungselemente mit Sonderformen of the Normenausschuss Mechanische Verbindungselemente (Fasteners Standards Committee).AmendmentsThis standard differs from the February 1995 edition as follows:a)All stud bolts (irrespective of their nominal length) may be provided with either type A or type B ends.b)Property classes have been changed.c)The specifications relating to surface finish have been amended.d)Alternative marking by colour coding has been specified.e)References have been updated.Previous editionsDIN 976:1970-01, 1986-09; DIN 976-1:1995-02.All dimensions are in millimetres.IntroductionStud bolts with metric thread are designed to perform functions similar to those of double end studs (clamping type or interference-fit type). This standard covers stud bolts with threads produced to tolerance 6g which is customary for bolt/nut assemblies of thread engagement group N as specified in DIN ISO 965-1.Attention is drawn to the fact that stud bolts with lengths exceeding those specified for thread engagement group N might not be true to gauge.SupersedesFebruary 1995 edition.-B e u t h -A n d r i t z A G -K d N r .144972-L f N r .2459875001-2004-07-13 14:25Page 2DIN 976-1:2002-121ScopeThis standard specifies dimensions and technical delivery conditions for stud bolts with metric thread made of steel, stainless steel or nonferrous metal.2Normative referencesThis standard incorporates, by dated or undated reference, provisions from other publications. These norma-tive references are cited at the appropriate places in the text, and the titles of the publications are listed below.For dated references, subsequent amendments to or revisions of any of these publications apply to this standard only when incorporated in it by amendment or revision. For undated references, the latest edition of the publication referred to applies.DIN 267-2Fasteners – Technical delivery conditions – Product grades and tolerances DIN 267-10Fasteners – Technical delivery conditions – Hot-dip galvanized components DIN 4000-2Tabular layouts of article characteristics for bolts, screws and fit boltsDIN EN 26157-3Fasteners – Surface discontinuities – Part 3: Bolts, screws and studs for special require-ments (ISO 6157-3:1988)DIN EN 28839Mechanical properties of fasteners – Bolts, screws, studs and nuts made of non-ferrous metals (ISO 8839:1986)DIN EN ISO 898-1Mechanical properties of fasteners made of carbon steel and alloy steel – Part 1:Bolts,screws and studs (ISO 898-1:1999)DIN EN ISO 3269Fasteners – Acceptance inspection (ISO 3269:2000)DIN EN ISO 3506-1Mechanical properties of corrosion-resistant stainless steel fasteners – Part 1: Bolts,screws and studs (ISO 3506-1:1997)DIN EN ISO 4042Fasteners – Electroplated coatings (ISO 4042:1999)DIN EN ISO 4753Fasteners – Ends of parts with external ISO metric screw thread (ISO 4753:1999)DIN EN ISO 4759-1Tolerances for fasteners – Part 1: Bolts, screws, studs and nuts – Product grades A, B and C (ISO 4759-1:2000)DIN EN ISO 10683Fasteners – Non-electrolytically applied zinc flake coatings (ISO 10683:2000)DIN ISO 965-1ISO general purpose metric screw threads — Tolerances – Part 1: Principles and basic dates (ISO 965-1:1998)DIN ISO 965-2ISO general purpose metric screw threads — Tolerances – Part 2: Limits of sizes for general purpose external and internal screw threads – Medium quality (ISO 965-2:1998)ISO 8992:1986Fasteners – General requirements for bolts, screws, studs and nuts3DimensionsStud bolt dimensions shall be as given in figures 1 and 2 and table 1.Type A , with RL type thread end as in DIN EN ISO 4753Figure 1:Type A stud bolt dimensions (notation)Type B , with CH type thread end as in DIN EN ISO 4753-B e u t h -A n d r i t z A G -K d N r .144972-L f N r .2459875001-2004-07-13 14:25Page 3DIN 976-1:2002-12Table 1:Stud bolt dimensionsThread size (d )Approx. mass, in kg, per 1000 unitsNominalsizeMin.Max.(continued)-B e u t h -A n d r i t z A G -K d N r .144972-L f N r .2459875001-2004-07-13 14:25Page 4DIN 976-1:2002-12Table 1 (continued)(continued)Thread size (d )Approx. mass, in kg, per 1000 unitsNominalsizeMin.Max.-B e u t h -A n d r i t z A G -K d N r .144972-L f N r .2459875001-2004-07-13 14:25Page 5DIN 976-1:2002-12Table 1 (concluded)Thread size (d )Approx. mass, in kg, per 1000 unitsNominal sizeMin.Max.Stud bolts are generally manufactured in the sizes for which a value of mass has been specified.Lengths between 500mm and 1000mm shall be graded in 20mm steps.Bracketed sizes should not be used.-B e u t h -A n d r i t z A G -K d N r .144972-L f N r .2459875001-2004-07-13 14:25Page 6DIN 976-1:2002-124Technical delivery conditionsTable 2:Technical delivery conditionsMaterialSteelStainless steel Nonferrous metalGeneral requirements As specified in ISO 8992.ThreadTolerance 6g As specified inDIN ISO 965-2.For sizes up to For sizes up to CuZn 1)M2,5:subject to M2,5: subject to agreement.agreement.A l 2)Property For sizes M3 up to For sizes M3 up to class M39: 4.8, 5.6, 5.8,M24: A2-70 or (material)8.8, 10.9 or 12.9.A4-70.For sizes above For sizes above M39: subject to M24: subject to agreement.agreement.As specified inDIN EN ISO 898-1DIN EN ISO 3506-1.DIN EN 28839.(test programme B).Product grade AAs specified inDIN EN ISO 4759-1.As processed.PlainPlainDIN 267-2 applies with regard to surface roughness.DIN EN ISO 4042applies with regard to electroplating.DIN EN ISO 10683applies with regard to zinc flake coatings.DIN 267-10 applies with regard tohot-dip galvanizing.DIN EN 26157-3applies with regard to limits for surface discontinuities for property classes 5.6, 8.8, 10.9,and 12.9.Acceptance As specified in DIN EN ISO 3269.inspection1)CU2 or CU3 grade copper-zinc alloy, at the manufacturer’s discretion.2)AL1 or AL2 grade aluminium alloy, at the manufacturer’s discretion.3)For stud bolts with nominal lengths of 1000 mm or more, the tolerance on length shall be js17 (product grade B as in DIN EN ISO 4759-1).Mechanical propertiesLimit deviations and geometrical tolerances 3)Surface finish–Surfacediscontinuities–––-B e u t h -A n d r i t z A G -K d N r .144972-L f N r .2459875001-2004-07-13 14:25Page 7DIN 976-1:2002-125DesignationDesignation of an M10 stud bolt (M10) of type B (B), with a nominal length, l , of 80 mm (80), of property class 8.8:Stud bolt DIN 976-1 – M10 é 80 – B – 8.8The DIN 4000-2-3 tabular layout of article characteristics shall apply to studs covered in this standard.6Marking6.1Property class or steel gradeSteel stud bolts of size M5 or greater shall be marked at one end with the symbol denoting the property class,except for bolts of property class 4.8 (cf. DIN EN ISO 898-1). Marking with the manufacturer’s symbol is not required.Stainless steel stud bolts of size M5 or greater assigned to property class A2-70 or A4-70 shall be marked at one end with the symbol denoting the material grade (A2 or A4).Marking of nonferrous metal stud bolts is not required.6.2Colour codingAs an alternative to marking as in subclause 6.1, stud bolts may be marked at one end with a colour code as in table 3. The marking shall not impair proper use of the bolt.Table 3:Colour codes for stud boltsSteelProperty class 4.8Marking not required.Property class 5.6Brown RAL 80151)Property class 5.8Blue RAL 50101)Property class 8.8Yellow RAL 10231)Property class 10.9White RAL 10131)Property class 12.9Black RAL 90171)Stainless steelA2-70Green RAL 60241)A4-70RedRAL 30001)Nonferrous metalCuZN, A lMarking not required.1)As in RAL 840-HR, obtainable from RAL Deutsches Institut für Gütesicherung und Kennzeichnung e.V., Siegburgerstraße 39,53757 Sankt Augustin, Germany.-B e u t h -A n d r i t z A G -K d N r .144972-L f N r .2459875001-2004-07-13 14:25。
螺丝批头英文翻译
螺纹大径：Major Diam螺纹中径：Pitch diam螺纹底径：Minor diam通止规：Go/No go gage机械性能：mechanical and physical propertiesunified thread 统一英制螺纹Lustrate hydrogen after galvanizing to avoid hydrogen embrittlement 镀后去氢，防止氢脆Case carburization 表面渗碳With across flats 对边With across corners 对角Radius of fillet:头下圆角Transition thread length 过度螺纹Wrenching height 扳拧高度Rockwell 铬氏硬度Vickers 维氏硬度Brinell 布氏硬度Metallography microscope 金相显微镜Salt spray device 盐雾试验箱Tensile testing machine 拉力试验机Cold forming 冷打Hot forging 红镦P C 8 = property class 8 机械性能8级原材料：Raw material 球化退火：Annealing冷拔：Drawing冷镦：Forming机加工：Machining 螺纹成型：Roll Threading热处理：heat-treatment表面处理：finish去氢：Lustrating hydrogen检验：Inspection包装：Packing入库：Stocking车床：lathe磨制：grinding红打：hot forging冲压：punching Diameter 直径Length 长度1 标准(接触的比较常用的就是德标和美标)GB （国标）ISO(国际标准)DIN （德制）JIS （日标）ANSI /ASME （American National Standards Institute – ANSI；American Society Of Mechanical Engineers – ASME）（美标）BS （英制）IFI =Industrial Fastener Institute是美国工业紧固件协会的标准2 螺纹M. MF (公制牙)UNC.（美制粗牙）UNF (美制细牙)UNEF (美制超细牙)B.S.W. 标准惠氏粗牙系列，一般用途圆柱螺纹B.S.F. 标准惠氏细牙系列，一般用途圆柱螺纹fine pitch thread 细牙full thread 全螺纹3 螺丝头型IHH=ind hex head 锯六角头PH=phillips 十字槽Pan 圆头(盘头)Oval 半沉头H.W.H.. 六角小法兰H.W.F. 六角大法兰CSK 沙拉头(沉头)Large wafer 大扁平头Bugle 喇叭头Truss 盘头带垫Pozi 米制槽Serra-tion 垫下带花Flower Head 开花头6-bobes recess 内梅花Cup head杯头4 常见紧固件名称split washer弹簧垫片（一般厂家会管washer叫“华司”）flat washer平垫片Self tapping screw自攻螺丝Self drilling screw自钻螺丝drywall screw 干墙螺丝/干壁螺丝/墙用螺丝high low screw高低牙螺丝collated screw链带螺丝Concrete screw 水泥螺丝Tri-lobular thread screw三角螺丝kep nut 锁紧螺母acorn nut 盖形螺母wing washer 翼型垫片eye bolt 吊环螺栓（也叫环首螺栓，其实这个叫法很多，大概是不同地区的缘故）Piston bolt 活塞螺钉Winding bolt 线圈螺钉Hexagon head bolts 六角头螺栓Hexagon flange bolts 六角法兰螺栓Carriage bolt 马车螺栓Square head bolt方头螺栓Flat counter sunk square neck bolts 沉头方颈螺栓Flat counter sunk nib bolts 沉头带榫螺栓Cross recessed pan head tapping screws 十字槽盘头自攻螺钉（如果在图纸上看到标注# 2或# 20等，是指该螺丝的头部适合2号或者20号的螺丝起子）5 表面处理方式BO=black oxide 氧化发黑（如果仅仅标注black,是指做染黑处理）Zinc plated 镀锌cementation 渗碳nylon patch耐落（刚看到的时候是直接按照字面翻译的“尼龙片”，拿给经理看的时候经理对照图纸看了半天跟我说你你去查下耐落的英文，果然---）6 其它图纸上可能出现的标注螺纹大径：Major Diam螺纹中径：Pitch diam螺纹底径：Minor diam内径ID= inner diameter外径OD= outside diameter机械性能8级P C 8 = property class 8机加工：Machining螺纹成型：Roll Threading热处理：heat treatment表面处理：finish（不过有时候也会标注成surface treatment去氢：Lustrating hydrogen一、按头部形状分类Pan Head盘头Flat Head平头countersunk Head沉头Round Head圆头Oval Head半沉头Pan washer Head垫圈盘头Socket Head六角圆柱头Hexagon cap Head外六角头Square shouder Head方肩头Cheese Head圆锥头Wing Head带翼头二、按穴形状分类Philips cross recessed十字Pozidriv cross recessed米字Torx, 6-lobular内梅花Socket内六角Slot一字槽三、按表面处理分类Znic blue兰锌Zinc black黑锌Zinc yellow黄锌Zinc white白锌Silver Plating镀银Nickel Plating镀镍Dacromet达克罗Heat dip zinc热浸锌kep nut 锁紧螺母cementation 渗碳acorn nut 盖形螺母6-bobes recess 内梅花六角头螺栓 Hexagonal head bolt方头螺栓 Square head bolt双头螺栓 Stud bolt铆钉 River键 Key六角螺絲(栓) HEX HEAD CAP SCREWS(HEX BOLTS) 六角機械螺絲 HEX HEAD MACHINE BOLTS六角木牙螺絲 HEX LAG BOLTS四角螺絲 SQUARE HEAD BOLTST頭螺絲 T HEAD BOLTS馬車螺絲 CARRIAGE BOLTS環首螺絲 EYE BOLTS內六角孔螺絲 HEX SOCKET CAP SCREWS固定螺絲 SET SCREWS螺椿栓 STUD BOLTS螺旋椿 SCREW STUDS輪殼螺栓 WHEEL BOLTS翼形螺絲 WING SCREWS自攻螺絲 SELF TAPPING SCREWS自削螺絲 THREAD CUTTING SCREWS鑽尾螺絲 SELF DRILLING SCREWS旋入螺絲 DRIVE SCREWS機械螺絲 MACHINE SCREWS木螺絲 WOOD SCREWS家具螺絲 FURNITURE SCREWS塑板螺絲 CHIPBOARD SCREWS牆用螺絲 DRYWALL SCREWS基礎螺栓 FOUNDATION BOLTSU型螺栓 U BOLTS勾頭螺栓 HOOK BOLTS套掛螺絲 TOGGLE BOLTS突緣螺絲 FLANGE BOLTS軌道螺栓(魚尾螺絲) TRACK BOLTS耐候鋼螺絲 CORTEN STEEL HEAVY HEX BOLTS扭矩控制螺栓 T.C.BOLTS高張力螺栓 HIGH STRENGTH BOLTS剪力釘(焊接螺絲) WELDING STUDS螺絲附華司組合 SCREWS AND WASHERS ASSEMBLED(SEMS)大尺寸螺栓 BIG SIZE BOLTS不鏽鋼小螺絲 STAINLESS STEEL SHEET METAL SCREWS不鏽鋼大螺絲 STAINLESS STEEL BOLTS銅螺絲 BRASS SCREWS鋁螺絲 ALUMINUM SCREWS合金鋼螺絲 ALLOY STEEL SCREWS電子螺絲 ELECTRONIC SCREWS微小精密螺絲 MICRO SCREWS塑膠螺絲 PLASTIC SCREWS復合材料用螺絲 PARTICLE BOARD SCREWS鈦合金螺絲 TITANIUM ALLOY BOLTS鈦、鋯、鉬、鈮等螺絲、零件、材料 TI,ZR,MO,NB PARE METAL BOLTS PARTS 拇指螺絲 THUMB SCREWS雙頭牙螺絲 DOUBLE END SCREWS HANGER BOLT車輛(汽車)螺絲、螺帽 AUTOMOTIVE FASTENERS航太用螺絲 AEROSPACE FASTENERS飛機特殊扣件 SOURCE CONTROL BOLTS拉栓 BLIND BOLTS面板螺絲 PANEL FASTENERS電梯螺絲 ELEVATOR BOLTS四角頭固定螺絲 SQUARE SET SCREWS大頭馬車螺絲 STEP BOLTS單向螺絲 ONE WAY LAG SCREWS管夾螺絲 HOSE CLAMP SCREWS不鏽鋼固定螺絲 STAINLESS STEEL HEX SOCKET CAP SCREWS不鏽鋼內六角螺絲 STAINLESS STEEL HEX SOCKET CAP SCREWS鉸鏈螺絲 HINGE SCREWS貨櫃螺絲 CONTAINER SCREWS復合材料鑽尾螺絲 BI-METAL SELF DRILLING SCREWS三角牙螺絲 TRILOBULAR THREAD SCREWS高低牙螺絲 HIGH LOW SCREWS夾板用螺絲 PARTICLE BOARD SCREWS馬桶螺絲 TOILET CLOSET BOLTS特長螺絲 SPECIAL LONGER SCREWS建業螺絲 BUILDING FASTENERS不鏽鋼六角螺絲 STAINLESS STEEL HEX SOCKET CAP SCREWS其它特殊螺絲 SPECIAL SCREWS OR BOLTS不鏽鋼特殊螺絲 SPECIAL STAINLESS STEEL SCREWS寬牙螺絲（粗牙螺絲） COARSE THREAD SCREWS鏈帶螺絲 COLLATED SCREWS水泥螺絲 CONCRETE SCREWS板模螺絲 CONSTRUCTION BOLTS鋅蝶螺絲 DIE CAST WING SCREWS; ZINC ALLOY重型車螺絲 HEAVY DUTY WHEEL HUB BOLTS內六角固定螺絲 HEX SOCKET SET SCREWS復合材料用螺絲（夾板用） PARTICLE BOARD SCREWS犁壁螺絲 PLOW BOLTS機(踏)車用螺絲、軸心 SCREWS AND SHAFTS FOR MOTORCYCLE OR BICYCLE 針車用螺絲、軸心 SCREWS AND SHAFTS FOR SEWING MACHING止付螺絲 SOCKET SET SCREWS不鏽鋼寬牙螺絲 STAINLESS STEEL COARSE THREAD SCREWS不鏽鋼高低牙螺絲 STAINLESS STEEL HIGH-LOW THREAD SCREWS不鏽鋼機械螺絲 STAINLESS STEEL MACHINE SCREWS不鏽鋼鑽尾螺絲 STAINLESS STEEL SELF DRILLING SCREWS不鏽鋼自攻螺絲 STAINLESS STEEL SELF TAPPING SCREWS不銹鋼自削螺絲 STAINLESS STEEL THREAD CUTTING SCREWS不鏽鋼三角牙螺絲 STAINLESS STEEL TRI-LOBULAR THREAD SCREWS不鏽鋼木螺絲 STAINLESS STEEL WOOD SCREWS套掛螺栓及螺絲 TOGGLE BOLTS鈦合金膨脹螺絲 TITANIUM ALLOY EXPANSION BOLTS六角蓋頭螺帽 HEX CAP NUTS六角鋸齒螺帽 HEX SERRATED NUTS六角輪緣螺帽 HEX FLANGE NUTS高腳螺帽 HEX COUPLING NUTS(HIGH NUTS)圓螺帽 ROUND NUTS四角螺帽 SQUARE NUTS管用螺帽 PIPE NUTS輪殼螺帽 WHEEL NUTS蝶型螺帽 WING NUTSU形螺帽 U NUTST形螺帽 T NUTS環首螺帽 EYE NUTS齒形螺帽 KEP NUTS齒花螺帽 CLINCH NUTS耐候鋼六角重型螺帽 CORTEN STEEL HEAVY HEX NUTS焊接螺帽 WELD NUTS高張力螺帽 HEIGH STRENGTH NUTS建業用螺帽 STRUCTURAL NUTS不鏽鋼螺帽 STAINLESS STEEL NUTS銅螺帽 BRASS NUTS鋁螺帽 ALUMINUM NUTS合金鋼螺帽 ALLOY STEEL NUTS重型車螺帽 HEAVY DUTY WHEEL HUB NUTS鐵器焊接袋帽 ACORN CAP NUTS金屬預置扭矩式螺帽 ALL-METAL PREVAILING TORQUE TYPE NUTS壁虎螺帽 ANCHOR NUTS大尺寸螺帽 BIG SIZE NUTS鐵蓋袋帽 CLOSED END ACORN NUTS盤形華司螺帽 CONICAL WASHER NUTS鐵蓋+尼龍圈組合蓋帽 DIN 986 DOMED CAP NUTS突緣尼龍蓋帽 FLANGE NYLON INSERT LOCK NUTS平面華司螺帽 FLAT WASER NUTS六角割溝螺帽 HEX SLOTTED NUT自鎖螺帽 SELF-LOCKING NUTS制止螺帽 SLIDING NUTSSLN-自動防鬆螺帽 SLN SELF-LOCKING NUTS其它特殊螺帽 SPECIAL NUTS彈簧螺帽 SPRING NUTS不鏽鋼突緣螺帽 STAINLESS STEEL FLANGE NUTS不鏽鋼六角輪緣尼龍螺帽 STAINLESS STEEL FLANGE NYLON INSERT LOCK NUTS 不鏽鋼六角重型螺帽 STAINLESS STEEL HEAVY HEX NUTS不鏽鋼六角螺帽 STAINLESS STEEL HEX NUTS不鏽鋼尼龍嵌入螺帽 STAINLESS STEEL NYLON INSERT LOCK NUTS鋅壓屬螺帽 ZINC DIE CASTING NUTS普通六角螺帽 HEX NUTS六角重型螺帽 HEAVY HEX NUTS薄型螺帽 HEX JAM NUTS尼龍嵌入防鬆螺帽 NYLON INSERT LOCK NUTS機械螺絲用六角螺帽 HEX MACHINE SCREW NUT合金鋼線材盤元 ALLOY STEEL WIRE ROD球狀化線材 ANNEALING WIRE AND ROD黑鐵絲 BLACK WIRE黃銅棒線 BRASS WIRE AND ROD磨光棒鋼 BRIGHT STEEL BAR(HEX/ROUND/SQUARE)銅合金線 COPPER ALLOY WIRE線切割線 E.D.M CUTTING WIRE快削鋼線材盤元 FREE CUTTING STEEL WIRE ROD線材 IRON OR STEEL WIRE線材盤元 IRON OR STEEL WIRE ROD洋白銅線 NICKEL SILVER WIRE磷青銅線 PHOSPHATE BRONZE WIRE不鏽鋼條棒 STAINLESS STEEL BAR(ROUND/HEX/SQUARE)不鏽鋼冷鍛線材 STAINLESS STEEL COLD HEADING WIRE不鏽鋼線(抽線後) STAINLESS STEEL DRAW WIRE不鏽鋼線材 STAINLESS STEEL WIRE不鏽鋼線材及盤元 STAINLESS STEEL WIRE AND ROD棒鋼 STEEL BAR(HEX/ROUND/SQUARE)轉回90度碾線頭機 90訌EVOLVING WIRE TWISTING MACHINE氣動拉釘機 AIR RIVETER各式螺絲類產品自動包裝 AUTOMATIC PACKAGING FOR ALL KINDS OF PACKAGING 自動包裝機 AUTOMATIC PACKING MACHINE螺絲製造搓牙機械 AUTOMATIC THREAD ROLLING MACHINE螺絲割尾加工機械 AUTOMATIC THREAD SLOTTING MACHINE螺絲製造成型機械 AUTOMATIC TRIMMING MACHINE拉釘打頭機 BLIND RIVET HEADING MACHINE螺絲、螺帽成型機 BOLT FORMERS,NUTS FORMERS,HEADERS螺絲、螺帽熱處理 BOLT NUT AND SCREWS HEAT TREATMENT螺絲、螺帽熱處理爐 BOLT NUT AND SCREWS HEAT TREATMENT FURNACES球狀化電器燉爐 CARBURIZING FURNACE VACUUM AND BELL TYPE FURNACE超防銹復合瓷膜 CERAMIC COATING連續式光輝滲碳淬火爐 CONTINUOUS BRIGHT CARBURIZING QUENCHING FURNACE 連續式光輝?#123;質淬火爐 CONTINUOUS BRIGHT HARDENING QUENCHING FURNACE 中、高熱鍍鋅光輝連續爐 CONTINUOUS BRIGHT HEAT TREAT FURNACE連續式光輝熱處理爐 CONTINUOUS TYPE BRIGHT HEAT TREATMENT FURNACE螺絲割尾及特殊割遘加工 MACHINE SCREW SHANK SLOTTING螺絲鑽孔加工 SCREW SHANK DRILLING雞眼上下模 EYELETS DIES一般線材、盤元、退火爐 GENERAL WIRE,WIRE ROD,ANNEALING FURNACE倒立式滑落型伸線機 HANDSTAND TYPE WIRE DRAWING MACHINE十字沖模 HEADER PUNCHES IN VARIOUS DRIVES成型沖模 HEADER PUNCHES IN VARIOUS DRIVES螺絲打頭機 HEADING MACHINE螺絲製造高速搓牙機械 HIGH SPEED AUTOMATIC THREAD ROLLING MACHINE高中低周波感應加熱爐 HIGH,MEDIUM,LOW FREQUENCY INDUCTION HEATER空心打頭機 HOLLOW HEADING MACHINE熱浸鍍鋅螺絲、螺帽 HOT DIP GALVANIZING BOLTS AND NUTS機械鍍鋅 MECHANICAL GALVANIZED迷你成型機 MINI-FORMERS成品自動收線機 NON-STOP COILER精抽自動收線機 NON-STOP COILER(SKINPASS)螺帽模 NUT FORMING DIES螺帽成型模 NUTS FORMERS特殊零件成型機 PARTS FORMING MACHING沖模 PUNCH DIES沖子 PUNCH PINS羅拉成型機 ROLLERS FORMERS機(踏)車用螺絲成型機 SCREW FOR MOTORCYCLE OR BICYCLE HEADING MACHINE止付螺絲成型機 SET SCREWS FORMERS套高成型機 SOCKETS FORMERS一般線材、盤元、螺絲合金燉爐 SPHEROIDIZING BRIGHT ANNEALING FURNACE球狀化熱處理爐 SPHEROIDIZING HEAT TREATMENT FURNACE攻牙機 TAPPING MACHINE螺絲攻、車刀、模具 TAPS DIES AND TOOLS搓牙機鐵屑分離裝置 THREAD CHIP SEPARATOR滾牙輪 THREAD ROLLING DIES牙板 THREAD ROLLING DIES PLATES精密油壓滾牙機 HYDRAULIC THREAD ROLLING MACHINES模具 TOOLS六角整頭模 TRIMMING DIES HEXAGAN碳化鎢模具 TUNGSTEN CARBIDE DIE鍍鈦處理(TiN)專業加工服務 TiN HARD COATING FOR CUTTING TOOLS AND PUNCH BY PVD電鍍化學原料 VARIOUS ELECTROPLATING CHEMICALS環規校正 CALIBRATION FOR RING GAGE環規、牙規、三線規校正 CALIBRATION FOR RING GAGE, ATHREAD GAGE, 3 WIRE GAGE螺絲、螺帽品檢量測儀器 FASTENERS INSPECTION AND MEASUREMENT INSTRUMENTS螺絲、螺帽成型攻牙專用油 FORMING AND TAPPING OILS FOR BOLTS AND NUTS FORMERS螺絲、螺帽五金等檢驗 INSPTECTION SERVICES FOR FASTENERS AND HARDWAREISO品質保證系統 ISO QUALITY ASSURANCE SYSTEM生產管理系統 PRODUCTION CONTROL SYSTEM物料管理系統 MATERIAL CONTROL SYSTEM调质处理--thermal refining.再调质---reconditioning退火---- annealing.时效处理---seasoning.淬火---quench hardening.老化---aging.白鐵蓋螺絲A2(18-8)CAP SCREWS水平調整螺絲ADJUSTED LEVELING SCREWS航太扣件AEROSPACE FAS TENERS合金鋼螺絲(栓) ALLOY STEEL SCREWS (BOL TS)鋁螺絲ALUMINUM SCREWS車輛(汽車)螺絲、螺帽AUTOMOTIVE FAS TENERS複含材料鉆尾螺絲BI-METAL SELF DRILLING SCREWS大尺寸螺絲BIG SIZE BOLTS公母螺絲組BINDER POST & SCREW SET拉栓BLIND BOLTS銅螺絲(栓) BRASS SCREWS (BOLTS)建築螺絲BUILDING FAS TENERS建築膨漲螺絲BUILDING WALL ANCHOR半圓頭六角孔螺絲BUTTON HEAD SOCKET CAP SCREWS馬車螺絲CARRIAGE BOLTS活動輪螺絲附件CASTORS FITTINGS塑板螺絲CHIPBOARD SCREWS快速釘緊螺絲及螺帽CLINCH STUDS & NUTS擠壓扣件CLINCHING FASTENERS齒花扣件CLINCHING PARTS寬牙螺絲COARSE THREAD SCREWS鏈帶螺絲COLLATED SCREWS水泥螺絲CONCRETE SCREWS板模扣件CONSTRUCTION FASTENERS貨櫃螺絲CONTAINER SCREWS耐候鋼螺絲CONTEN STEEL HEAVY HEX BOL TS魚尾螺絲CONTEN STEEL OVAL NECK TRACK BOL TS雙刀螺絲CUTTER SCREWS匣板螺絲DECK SCREWS鋅蝶螺絲DIE CAST WING SCREWS;ZINC ALLOY雙頭牙螺絲DOUBLE END SCREWS, HANGER BOL T旋鎖螺絲DRIVE LOCK SCREWS旋入螺絲DRIVE SCREWS牆用螺絲DRYWALL SCREWSEJOT DELTA PT SCREWSEJOT PT SCREWS電子螺絲ELECTRONIC SCREWS電梯螺絲ELEVATOR BOL TS歐洲螺絲EURO SCREWS環首螺絲EYE BOL TS岡山頭螺絲FILLISTER SCREWS鰭頭螺絲FIN NECK ROUND HEAD BOLTS管配件接頭FITTING FASTENERS (CONNECTORS)突緣螺絲FLANGE BOL TS (SCREWS)平頭六角孔螺絲FLAT HEAD SOCKET CAP SCREWS平紡螺絲FLAT PAN HEAD SCREWS地板螺絲FLOORING PANEL SCREWS基礎螺絲FOUNDATION BOLTS框架支撐螺絲FRAME ANCHOR-LAG ROUND SCREWS傢俱螺絲FURNITURE SCREWS (CONNECTING BOLTS)重型車螺絲、螺帽HEAVY DUTY WHEEL HUB BOLTS & NUTS 六角螺絲(栓) HEX HEAD CAP SCREWS (HEX BOL TS)六角機械螺絲HEX HEAD MACHINE BOLTS六角木牙螺絲HEX LAG BOLTS內六角孔螺絲HEX SOCKET CAP SCREWS等高螺絲HEX SOCKET HEAD SHOULDER SCREW薄頭強力螺絲HEX SOCKET LOW HEAD CAP SCREW內六角固定螺絲HEX SOCKET SET SCREWS華司頭機械螺絲HEX WASHER HEAD MACHINE SCREWS高低牙螺絲HIGH LOW THREAD SCREWS高張力螺絲HEX SOCKET HEAD SHOULDER SCREW鉸鏈螺絲HINGE SCREWS勾頭螺栓HOOK BOLTS管夾螺絲HOSE CLAMP SCREWS哈克釘HUCK BOLTS旋鎖螺絲KTX LOCKING RECESS SCREWS機械螺絲MACHINE SCREWSMDF螺絲MDF SCREWS微小精密螺絲MICRO SCREWS鉬六角螺絲MO HEX HEAD CAP SCREWS鉬NC螺絲MO NC FASTENERS鉬螺帽MO NUTS鎳合金螺絲MONEL FASTENERS多衝程螺絲MULTI-STAGE SCREW & PARTS利革釘NYLON PLUG & SCREWS單向螺絲ONE WAY LAG SCREWS枋頭中心螺絲PAN HEAD CENTER BOLTS面板螺絲PANEL FASTENERS複合材料用螺絲(夾板用) PARTICLE BOARD SCREWS貫穿螺絲PENETRATE SCREWS十字四角複合螺絲PH+SQ COMBINATION SCREWS塑膠螺絲PLASTIC SCREWS犁壁螺絲PLOW BOLTS特殊精密螺絲PRECISION AXIS AND SPECIAL FASTENERS卷帶螺絲ROLL COLLATED SCREWS屋頂螺絲ROOFING SCREWS螺旋椿SCREW STUDS機(踏)車用螺絲.軸心SCREWS & SHAFTS FOR MOTORCYCLE OR BICYCLE 針車用螺絲.軸心SCREWS & SHAFTS FOR SEWING MACHINE螺絲附華司組合SCREWS & WASHERS ASSEMBLED (SEMS)安全螺絲SECURITY SCREWS鑽尾螺絲SELF DRILLING SCREWS自攻螺絲SELF TAPPING SCREWS固定螺絲SCREWS & SHAFTS FOR SEWING MACHINE剪力釘SHEAR CONCRETE STUD束肩螺絲(栓) SHOULDER SCREWS (BOLTS)一字溝槽固定螺絲SLOTTED SET SCREWS止付螺絲SOCKET SET SCREWS飛機特殊扣件SOURCE CONTROL BOL TS特殊塗裝螺絲SPECIAL COATING SCREWS特長螺絲SPECIAL LONGER SCREWS特殊材質螺絲SPECIAL MATERIAL SCREWS特殊螺絲SPECIAL SCREWS OR BOLTS特殊防鬆螺絲SPECIAL SELF-LOCKING SCREWS不鏽鋼特殊螺絲SPECIAL STAINLESS STEEL SCREWS特殊割尾螺絲SPECIAL THREAD CUTTING SCREWS四角螺絲SQUARE HEAD BOL TS四角頭固定螺絲SQUARE HEAD SET SCREWS不鏽鋼大螺絲STAINLESS STEEL BOL TS不鏽鋼塑板螺絲STAINLESS STEEL CHIPBOARD SCREWS不鏽鋼粗牙螺絲STAINLESS STEEL COARSE THREAD SCREWS不鏽鋼旋入螺絲STAINLESS STEEL DRIVE SCREWS不鏽鋼平頭內六角孔螺絲STAINLESS STEEL FLAT HEAD SOCKET CAP SCREWS 不鏽鋼六角螺絲STAINLESS STEEL HEX HEAD CAP SCREWS不鏽鋼內六角螺絲STAINLESS STEEL HEX SOCKET CAP SCREWS不鏽鋼固定螺絲STAINLESS STEEL HEX SOCKET SET SCREWS不鏽鋼高低牙螺絲STAINLESS STEEL HIGH-LOW THREAD SCREWS不鏽鋼機械螺絲STAINLESS STEEL MACHINE SCREWS不鏽鋼小螺絲STAINLESS STEEL SCREWS不鏽鋼鑽尾螺絲STAINLESS STEEL SELF DRILLING SCREWS不鏽鋼自攻螺絲STAINLESS STEEL SELF TAPPING SCREWS不鏽鋼SEMS 螺絲STAINLESS STEEL SEMS SCREWS不鏽鋼自削螺絲STAINLESS STEEL THREAD CUTTING SCREWS不鏽鋼牙條棒STAINLESS STEEL THREAD ROD不鏽鋼三角牙螺絲STAINLESS STEEL TRIANGULAR SCREW THREAD不鏽鋼木螺絲STAINLESS STEEL WOOD SCREWS卡鎖壁虎STEEL LOCKING ANCHOR大頭馬車螺絲STEP BOL TS螺樁栓STUD BOLTST頭螺絲T HEAD BOL TS扭矩控制螺栓T.C. BOL TS (TENSION CONTROL BOL TS)自削螺絲THREAD CUTTING SCREWS牙條棒THREAD ROD姆指螺絲THUMB SCREWS鈦合金自行車螺絲TITANIUM -6AL –4R ALLOY FASTENERS鈦合金螺絲TITANIUM ALLOY BOLTS鈦六角螺絲TITANIUM HEX HEAD CAP SCREWS (HEX BOLTS)鈦NC螺絲TITANIUM NC FASTENERS鈦止付螺絲TITANIUM SET SCREWS鈦內六角孔螺絲TITANIUM SOCKET CAP SCREWS鈦牙條TITANIUM THREAD ROD套掛螺絲TOGGLE BOL TS套掛螺栓及螺絲TOGGLE BOL TS & ACOUSTICAL LAG (SCREWEYE)馬桶螺絲TOILET CLOSET BOLTSTORX SCREWS TORX SCREWS軌道螺栓(魚尾螺絲) TRACK BOLTS三角牙螺絲TRIANGULAR SCREWS THREADU型螺栓U BOLTS直立軸螺絲VERTICAL SHAFT SCREWS焊接螺絲WELD STUDS,SCREWS,BOL TS焊點螺絲WELD STUDS SCREWS輪轂螺栓WHEEL BOLTS車輪軸螺絲,螺帽WHEEL HUB BOL TS AND NUTS窗戶螺絲WINDOW SCREWS翼形螺絲WING SCREWS木螺絲WOOD SCREWS鋯螺絲ZR FASTENERSSET SCREWS SET SCREWSHIGH STRENGTH BOLTS HIGH STRENGTH BOLTS鐵蓋焊接袋帽ACORN CAP NUTS金屬預置扭矩式螺帽ALL-METAL PREVAILING TORQUE TYPE NUTS 合金鋼螺帽ALLOY STEEL NUTS鋁螺帽ALUMINUM NUTS壁虎螺帽ANCHOR NUTS圓柱帽BARREL NUTS (CROSS DOWEL)大尺寸螺帽BIG SIZE NUTS銅螺帽BRASS NUTS四角多用途螺帽CAGE NUTS袋帽CAP NUTS城堡螺帽CASTLE NUTS齒花螺帽CLINCH NUTS鐵蓋袋帽CLOSED END ACORN NUTS盤形華司+袋帽螺帽CONICAL WASHER AND CAP NUTS盤形華司螺帽CONICAL WASHER NUTS耐候鋼六角重型螺帽CORTEN STEEL HEAVY HEX NUTS長螺帽COUPLING NUTS鐵蓋+尼龍圈組合蓋帽DIN 986 DOMED CAP NUTS碟鎖防鬆脫螺帽DISK-LOCK NUTS企眼螺帽EYE COUPLING NUTS環首螺帽EYE NUTS突緣尼龍螺帽FLANGE NYLON INSERT LOCK NUTS平面華司螺帽FLAT WASHER NUTS齒輪GEARS六角重型螺帽HEAVY HEX NUTS六角蓋頭螺帽HEX CAP NUTS六角突緣螺帽HEX FLANGE NUTS薄型螺帽HEX JAM NUTS薄型電子六角螺帽HEX JAM NUTS (FOR ELECTRONIC)機械螺絲用六角螺帽HEX MACHINE SCREW NUT普通六角螺帽HEX NUTS六角鋸齒螺帽HEX SERRATED NUTS雙頭內牙螺帽HEX (REDUCER )COUPLING NUTS高張力螺帽HIGH STRENGTH NUTS內外牙螺母(拉帽) INSERT NUTSJCN NUTS JCN NUTS齒形螺帽KEP NUTS防鬆螺帽LOCK NUTS長螺帽LONG NUTS機車用螺帽NUTS FOR MOTORCYCLE面板螺帽NUTS PLATE尼龍袋帽NYLON CAP INSERT LOCK NUTS尼龍嵌入防鬆螺帽NYLON INSERT LOCK NUTS馬桶螺帽OPEN END ACORN NUTS卡車輪胎螺帽OUTER CAP NUTS管用螺帽PIPE NUTS塑膠螺帽PLASTIC NUTSPOP NUTS POP NUTS抑制螺帽PREVAILING TORGUE NUT快速扣件PUSH NUT FASTENERS長方形螺帽(薄型) RECTANGLE JAM NUTS長方四角螺帽RECTANGLE SQUARE NUTS圓螺帽ROUND NUTS自鎖螺帽SELF-LOCKING NUTS制止螺帽SLIDING NUTSSLN-自鎖防鬆螺帽SLN SELF-LOCKING NUTS溝槽螺帽SLOTTED NUTS特殊螺帽SPECIAL NUTS特殊輪轂螺帽SPECIAL WHEEL NUTS彈簧螺帽SPRING NUTS薄型四角螺帽SQUARE JAM NUTS四角螺帽SQUARE NUTS不鏽鋼突緣螺帽STAINLESS STEEL FLANGE NUTS不鏽鋼六角突緣尼龍螺帽STAINLESS STEEL FLANGE NYLON INSERT LOCK NUTS 不鏽鋼六角重型螺帽STAINLESS STEEL HEAVY HEX NUTS不鏽鋼六角螺帽STAINLESS STEEL HEX NUTS不鏽鋼螺帽STAINLESS STEEL NUTS不鏽鋼尼龍嵌入螺帽STAINLESS STEEL NYLON INSERT LOCK NUTS不鏽鋼四角螺帽STAINLESS STEEL SQUARE NUTS建築用螺帽STRUCTURAL NUTST形螺帽T NUTS塑膠品之埋植銅,鋁螺帽THREADED INSERTS FOR PLASTIC INJECTION MOULDINGS鈦螺帽TITANIUM NUTS壓邊螺帽+盤形華司組合TOP LOCK NUT WITH CONICAL WASHER ASSEMBLEU形螺帽U NUTS輪轂螺帽WHEEL NUTS蝶形螺帽WING NUTS鋅壓鑄螺帽ZINC DIE CASTING NUTS鋁釘ALUMINUM NAILS馬達軸承軸心組件BEARING SHAFT（MOTOR）軸承軸心BEARING SHAFT開口鉚釘BIFURCATED RIVETS長形拉帽（長型螺帽）BINDER POSTS（ANCHOR NUTS）拉帽BLIND NUTS (RIVET NUTS)拉釘BLIND RIVETS電梯壁虎BOLT ANCHOR金屬黏著橡膠華司（雙層華司）BONDED WASHERS銅釘BRASS NAILSC型扣環C-RINGS小眼釘CEILING HANGER化學壁虎CHEMICAL STUD實心梢CLEVIS PINS & STRAIGHT PINS彈片CLIPS捲釘COIL NAILS冷鍛零件COLD FORMING PART開口梢COTTER PINS洋釘鉤CUP HOOKS弧型華司CURVED WASHER外迫壁虎CUT ANCHOR插梢DOWEL PIN捶釘DRIVE RIVET壁虎DROP IN ANCHORE型環E-RINGS膨脹螺栓EXPANSION ANCHOR BOLTS難眼釘EYELETS RIVETS門鉤GATE HOOKS插溝銷GROOVED PINS有槽鋼釘GROOVED STEEL NAILS火藥釘GUNPOWDER NAILS壁鉤HARDWALL HANGERS雙片夾壁虎HEAVY DUTY SHIELD ANCHORR型梢HITCH PINS（SNAP PINS）空心釘HOLLOW RIVETS洋釘IRON NAILSJ鉤J HOOKK.D. FITTING K.D. FITTING閂鎖LATCHES & KEEPER ASSEMBLEDS多衝程鉚釘MULTI-STAGE RIVERS錘釘壁虎NAIL IN ANCHOR尼龍壁虎NYLON (METAL) FRAME ANCHOR塑膠華司NYLON WASHERS其他特殊鉚釘OTHER SPECIAL RIVETS樣品鉤PEGBOARD HOOK吊圖鉤PICTURE HANGERS梢PINS各式管夾,管束PIPE HANGER管塞PIPE PLUG塑膠壁虎PLASTIC NYLON ANCHORSPOP拉釘系列產品POP RIVETS快速插銷QUICK RELEASE PINSR型扣環R-RINGS扣環RINGS鉚釘RIVETS圓棒鐵釘ROUND IRON NAILST型鐵釘ROUND IRON TAPE T NAIL圓棒鋼釘ROUND STEEL NAILST型鋼釘ROUND STEEL TAPE T NAILSU型鋼釘ROUND STEEL TAPE U NAILS橡膠華司RUBBER WASHERSS鉤S HOOKSS型扣環S-RINGS螺旋鋁釘SCREW ALUMINUM NAILS螺旋環(洋眼) SCREW EYES螺旋鉤及螺旋圈SCREW HOOK & SCREW RINGS螺絲鉤SCREW HOOKS螺旋鐵釘SCREW IRON NAILS螺旋鋼釘SCREW STEEL NAILS中空鉚釘SEMI-TUBULAR RIVET套管壁虎SLEEVE ANCHOR實心鉚釘SOLID RIVETS特殊華司SPECIAL WASHERS快速鉚接扣件SPEED RIVETING開叉釘SPLIT DRIVE ANCHORS彈簧梢SPRING PIN彈簧華司SPRING WASHERS彈簧蝴蝶夾SPRING WINGS折釘SQUARE HOOKS不鏽鋼鋼釘STAINLESS STEEL NAILS不鏽鋼中空釘STAINLESS STEEL SEMI-TUBULAR RIVET不鏽鋼斜紋釘STAINLESS STEEL SLANTING STRIPES NAILS 不鏽鋼華司STAINLESS STEEL WASHERS鋼鐵釘STEEL & IRON NAILS鋼釘STEEL NAILSL型鋼釘STEEL TAPE L NAILS鐵馬鉤STORAGE HOOK吸盤鉤SUCTION HANGERS蘭花鉤SWAG HOOKS三角吊鉤SWIVEL LOOP HANGERS地毯鋼釘TACKED IRON NAILS搓牙鐵釘THREAD NAILS大眼釘TIE WIRE SPADE STUD鈦合金鉚釘TITANIUM ALLOY RIVETS鈦合金膨漲螺絲TITANIUM ALLOY EXPANSION BOLTS鈦華司TITANIUM WASHERS齒型華司TOOTH LOCK WASHERS管形鉚釘TUBULAR RIVETS雙向迫緊器TURNBUCKLE節牙鋼釘W/STRIP STEEL NAILS華司WASHERS波浪型華司WAVE WASHER拉漲壁虎WEDGE ANCHOR線圈WIRE鋅合金壁虎ZINC ALLOY FRAME ANCHOR螺絲,螺帽,五金,DIY扣件ALL KINDS OF PACD AGING SERIES 合金鋼工具ALLOY STEEL TOOLS電子手把HANDLES FOR ELECTRONIC DEVICES六角板手HEXAGON KEYS螺絲起子POWER BIT螺絲起子SCREWDRIVER BIT電動螺絲起子AUTOFEED SCREWDRIVER工具套筒組件SOCKET SETS套筒SOCKETS板手WRENCH自動鍊帶螺絲槍AUTOFEED SCREW DRIVER合金鋼線材盤元ALLOY STEEL WIRE ROD鋁合金錠ALUMINUM ALLOY球狀化線材ANNEALING WIRE & ROD黑鐵絲BLACK WIRE黃銅棒線BRASS WIRE & ROD磨光棒鋼BRIGHT STEEL BAR (HEX/ROUND/SQUARE)銅合金線COPPER ALLOY WIRE線切割線E.D.M CUTTING WIRE快削鋼線材盤元FREE CUTTING STEEL WIRE ROD鍍鋅鐵線GALVANIZED STEEL WIRE線材IRON OR STEEL WIRE線材盤元IRON OR STEEL WIRE ROD洋白銅線NICKEL SILVER WIRE磷青銅線PHOSPHOR BRONZE WIRE各種表面處理用噴砂材料SAND BLASTING MATERIALS不鏽鋼條棒STAINLESS STEEL BAR (ROUND/HEX/SQUARE)不鏽鋼冷鍛線材STAINLESS STEEL COLD HEADING WIRE不鏽鋼線(抽線後) STAINLESS STEEL DRAW WIRE不鏽鋼網線STAINLESS STEEL NET WIRE不鏽鋼特殊線STAINLESS STEEL SPECIAL WIRE不鏽鋼彈簧線STAINLESS STEEL SPRING WIRE不鏽鋼線材STAINLESS STEEL WIRE不鏽鋼線材及盤元STAINLESS STEEL WIRE & ROD棒鋼STEEL BAR(HEX/ROUND/SQUARE)鈦、鋯、鉬、鈮等螺絲、零件、材料TI、ZR、MO、NB PARE METAL BOLTS PARTS 鋅合金錠ZINC ALLOY立體/平面雕刻機3D DIE-SINKING MACHINE/ENGRAVING MACHINE轉回90度輾線頭機90°REVOLVING WIRE TWISTING MACHINE乾燥機AIR DRYER氣動拉釘機AIR RIVETER鋁,低合金熔解熱處理爐ALUMINUM & LOW ALLOY MELTING FURNACE鋁散熱器燒焊熱處理爐ALUMINUM BRAZING FURNACE FOR ALUMINUM CONDENSER不鏽鋼線材連續式光輝熱處理退火爐ANNEALING FURNACE SPECIALLY FOR STAINLESS WIRE小型脫油機ANTI-OIL MACHINE自動包裝機AUTOMATIC PACKING MACHINE螺絲自動檢查設備AUTOMATIC SCREW SORTING MACHINE自動送鎖螺絲機AUTOMATIC SCREWING MACHINE螺絲割尾加工機械AUTOMATIC THREAD SLOTTING MACHINE螺絲製造成型機械AUTOMATIC TRIMMING MACHINE箱式滲碳氮化爐BATCH TYPE CARBURIZING & MITRIDING FURNACE鐘罩式退火(球化)爐BELL TYPE SPHEROIDIZING ANNEALING FURNACE拉帽成型機BLIND NUT FORMERS拉釘打頭機BLIND RIVET HEADING MACHINE螺絲(栓)成型機BOLT FORMERS螺絲、螺帽成型機BOLT FORMERS, NUT FORMERS, HEADERS螺栓模BOLT HEADING DIES螺絲、螺帽熱處理BOLT,NUT & SCREWS HEAT TREATMENT螺絲、螺帽熱處理爐BOLT,NUT & SCREWS HEAT TREATMENT FURNACES圓剪式打頭機BUSH CUT-OFF HEADING MACHINE圓剪式空心打頭機BUSH CUT-OFF HOLLOW HEADING MACHINE主模CARBIDE DIES剪模CARBIDE QUILLS不鏽鋼螺絲,扣件連續式光輝調質淬火爐CARBURIZING FURNACE FOR STAINLESS FASTENER球狀化電氣炖爐CARBURIZING FURNACE,VACUUM & BELL TYPE FURNACE流氣式箱型爐(箱式,坑式,台車式,連續式) CIRCULATION FURNACE (BOX,PIT,TRUCK,CONTINUOUS TYPE)CNC電腦雕刻機CNC ENGRAVING MACHINE捲釘製造機COIL NAIL COLLATOR連續式光輝滲碳,淬火,回火爐CONTINUOUS BRIGHT CARBURIZING & HARDENING FURNACE連續式光輝滲碳淬火爐CONTINUOUS BRIGHT CARBURIZING QUENCHING FURNACE連續式光輝調質淬火爐CONTINUOUS BRIGHT HARDENING QUENCHING FURNACE中,高熱鍍鋅光輝連續爐CONTINUOUS BRIGHT HEAT TREAT FURNACE連續式光輝熱處理爐(不鏽鋼,硬銲) CONTINUOUS BRIGHT TREATMENT (FOR STAINLESS,BRAZING)連續式光輝熱處理爐CONTINUOUS TYPE BRIGHT HEAT TREATMENT FURNACE耐腐蝕表面處理爐(耐鍊) CORROSION RESISTANCE OF SURFACE TREATMENT FURNACE剪刀(螺絲模) CUT-OFF KNIVES集塵設備CYCLONE EQUIPMENT各種碳化鎢製品設計製造DES IGN & MANUFACTURE OF TUNGSTEN CARBIDE PRODUCTS模具DIES & TOOLS鑽尾模DRILL POINT DIES耐衝螺絲成型模具FASTENER FORMING DIES螺絲、螺帽品檢量測儀器FASTENERS INSPECTION AND MEASUREMENTS’INSTRUMENTS精密過濾器FILTER滾溝牙板FLAT KNURLING DIES一般線材,盤元,退火爐GENERAL WIRE,WIRE ROD ANNEALING FURNACE手動拉釘鉗HAND RIVETER倒立式滑落型伸線機HANDSTAND TYPE WIRE DRAWING MACHINE白鐵針HEADER PUNCHES FOR STAINLESS BOLT三角,四角,六角針HEADER PUNCHES IN VARIOUS DRIVES(1)米字,一字,梅花,零號針HEADER PUNCHES IN VARIOUS DRIVES(2)一字六角邊沖頭HEADER PUNCHES IN VARIOUS DRIVES(3)螺絲打頭機HEADING MACHINE六角沖針HEX PINS六角沖模HEX RECESS PUNCHES六角沖模HEX TRIMMING DIES螺絲製造高速搓牙機械HIGH SPEED AUTOMATIC THREAD ROLLING MACHINE高中低週波感應加熱爐HIGH,MEDIUM,LOW FREQUENCY INDUCTION HEATER空心打頭機HOLLOW HEADING MACHINE熱鍛造機HOT FORMER沖銷KNOCKOUT PINS雷射/影像篩選機LASER/OPTICAL SORTING MACHINE FOR SCREWS立式輸送機LOADER機械螺絲牙板MACHINE SCREW THREAD ROLLING DIES PLATES沖床用的沖具MANUFACTURE OF PUNCH FOR PRESS DIE螺絲,螺帽用的沖具MANUFACTURE OF PUNCH MAKING BOLTS AND NUTS迷你成型機MINI-FORMERS鐵釘滾牙機NAIL ROLLING MACHINE鐵釘模具NAILS DIE成品自動收線機NON-STOP COILER精抽自動收線機NON-STOP COILER (SKINPASS)螺帽模NUT FORMING DIES螺帽成型機NUTS FORMERS螺帽攻牙機NUTS TAPPING MACHINE特殊零件成型機PARTS FORMING MACHINE腳踏板系列自動組立專用機PEDAL AUTOMATIC ASSEMBLING MACHINE十字四角複合針PH+SQ COMBINATION PUNCHES四角十字沖模十字沖模PHILLIPS PUNCHES十字割溝沖模PHILLIPS SLOTTED PUNCHES沖針殼PIN HOLDERS鎖用中心零件PINS TAILPIECE拋光機/磨光台POLISHING MACHINE手握式螺絲自動供給鎖緊機PORTABLE SCREW-DRIVING MACHINE粉末治金燒結,黑化爐POWDER METALLURGY & STEAM TREATMENT FURNACE米字沖模POZI PUNCHES沖模PUNCH DIES沖子PUNCH PINS沖針沖床引伸模具PUNCHING DIES羅拉成型機ROLLERS FORMERSRX,DX瓦斯變成爐,AX 氨氣分解爐RX,DX GAS GENERATOR,AX AMMO GAS GENERATOR鹽浴式熱處理爐SAL T BATH HEAT TREATMENT FURNACE各式表面處專用噴砂機SAND BLASTING MACHINE FOR SURFACE TREATMENT螺絲自動組合華司機器SCREW & WASHER ASSEMBLY MACHINE FOR SEMS機(踏)車用螺絲成型機SCREW FOR MOTORCYCLE OR BICYCLE HEADING MACHINE螺絲夾尾模SCREWS TAIL POINT DIES鑽尾螺絲成型機SELF-DRILLING SCREW FORMING MACHINE鑽尾模具SELF-DRILLING SCREW MAKING DIES止付螺絲成型機SET SCREWS FORMERS梅花沖頭SIX LOBE PUNCHES一字沖模SLOT PUNCHES套筒成型機SOCKETS FORMERS碳鋼盤元,線材,球狀化熱處理退火爐SPHEROIDIZING ANNEALING FURNACE FOR STEEL WIRE一般線材,盤元,螺絲合金炖爐SPHEROIDIZING BRIGHT ANNEALING FURNACE球狀化熱理爐SPHEROIDIZING HEAT TREATMENT FURNACE四角孔針具SQ PUNCHES四角沖模SQUARE RECESS PUNCHES不鏽鋼鑽尾螺絲割尾STAINLESS STEEL SELF DRILLING SCREW MILLED POINT鑽子TAP攻牙機TAPPING MACHINE自攻螺絲牙板TAPPING SCREW THREAD ROLLING DIES PLATES螺絲攻、車刀、模具TAPS DIES & TOOLS鐵氟龍(TEFLON)及琺瑯燒付爐TEFLON COATING FURNACE搓牙機鐵屑牙離裝置THREAD CHIP SEPARATOR滾牙輪THREAD ROLLING DIES牙板THREAD ROLLING DIES PLATES螺絲搓手機THREAD ROLLING MACHINE精密油壓滾牙機THREAD ROLLING MACHINES貨物捆綁系統TIE DOWN HARDWARE彈簧機週邊零件TOOLING PERIPHERAL COMPONENT OF SPRING MACHINE六角整頭模TRIMMING DIES HEXAGON碳化鎢模具TUNGSTEN CARBIDE DIEUNILOCK SELF-LOCKING AND SEAL-LOCKING UNILOCK SELF-LOCKING AND SEAL-LOCKING FASTENERS電鍍化學原料VARIOUS ELECTROPLATING CHEMICALS立式單雙層連續伸線機VERTICAL TYPE SINGLE DECK WIRE DRAWING MACHINE 溫鍛造機WARM FORMER伸線機WIRES DRAWER特殊鉚合扣件COLLARS (A BLIND FASTENER FOR HUCK INTL)電器銀接點CONTACT POINT螺絲DIY包裝系列DIY SCREWS PACKING SERIES自攻螺紋襯套ENSAT THREAD INSERT螺絲、螺帽成型攻牙專用油FORMING & TAPPING OILS FOR BOL TS & NUTS FORMERS鉸鏈HINGES熱浸鍍鋅螺絲,螺帽HOT DIP GALVANIZING BOLTS & NUTS工業用鍊INDUSTRIAL STEEL LINK CHAINS安全護套K-SERT機車離合器零件MANUFACTURE OF MOTORCYCLE’S CVT PARTS鏡托MIRROR HOLDERS螺絲套筒NUT SETTERS尼龍頭（用於螺絲頭部）NYLON HEAD（FOR SCREWS）尼龍圈（用於防鬆螺帽）NYLON RING（FOR LOCK NUTS）O.E.M. 組件O.E.M. PARTS精密加工元件PRECISE LATHE CUTTING PARTS精密車床零組件PRECISION TURNING PART 沖壓零件PUNCHING PARTS螺紋護套RECOIL INSERTS軛鐵(T型鐵、U型鐵) T-YOKE,UNDER YOKE 喇叭頭軛鐵U-YOKE,T-YOKE FOR SPEAKER 輪子零件WHEEL COMPONENT木螺絲牙板WOOD SCREW DIES。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
TECHNICAL DATE
GENERAL INFORMATION
STUDBOLTS
FOR HIGH PRESSURE SERVICE IN THE OIL, GAS AND CHEMICAL INDUSTRIES Studbolts (threaded rods with 2 heavy hexagon nuts) are used in the offshore, chemical and petrochemical industries.
Material specifications:
ASTM A193 - for high pressure and high temperatures,
B5, B6, B7, B7M, B16, B8, B8T, B8M, B8C.
ASTM A320 - for low temperatures,
L7, L7M, B8, B8T, B8M, B8C.
ASTM A194 - for nuts,
Grade 2H, 2HM, 3, 4, 6, 7, 8, 8T, 8M, 8F, 8C.
ASTM A453 - Grade 660.
Exotic materials & specials to customers requirements such as:
Monel, Inconel, Hastelloy, DUPLEX.
Certificates:
A certificate acc. to DIN 50049/3.1B, with the chemical composition and the mechanical properties for all materials mentioned above, will be delivered with the materials.
(Other certificates on request.)
Coatings:
The full range of surface finishes is available:
zinc plated, nickel, yellow zinc plated, hot dip galvanized, dacromet, PTFE coating etc.
STUDBOLTS ACC. TO ANSI B 16.5
Studbolts – UNC and 8 UN (=thread acc. to B.1.1) – the length (in mm./inches) equals the effective thread-length measured from the first to the last thread without the chamfers.
-----------------------------------------------------------------------------------------------------------------
Studbolts – Metric (=ISO thread)-– the length is including the chamfers.
Equivalent thread sorts acc. to AFNOR, UNI, BS, DIN.
NUTS ACC. TO ANSI B 18.2.2 (heavy)
“Heavy” nuts are generally “hot forged”, with on one side a washer-face.
Marking: Studbolts and nuts are marked with a manufacturers- and material marking.
ASTM DESIGNATION A 193
ASTM DESIGNATION A 320
TECHNICAL DATE
CARBON AND ALLOY STEEL FOR NUTS ASTM DESIGNATION A 194
METRIC SERIES
UNC AND 8UN SERIES
METRIC SERIES
UNC AND 8UN SERIES。