美思奇电话机使用说明书HCD2968(50)P_TSDL
渴望 hcd139(121)P TSDL的说明书
渴望 hcd139(121)P/TSDL的说明书感谢您购买渴望HCDl39(21)P／TSDL B037型来电显示电话机。
在您安装使用前敬请认真阅读说明书，以了解本机特点，使用时才能充分发挥其特有的功能。
本产品各项指标均符合国家标准，执行标准编号：GB／T15279-2002，YDN069-1997。
—、使用注意事项1、电话机应安装在干燥、通风、无腐蚀气体的地方。
2、来电显示功能必须要本地电信局开通并向电信局申请才能显示对方号码。
没有开通来电显示的地方不影响话机普通功能使用。
二、主要功能1、8种普通铃声1组贵宾铃声，普通铃声可选。
2、DTMF／FSK多制式兼容，来电自动识别。
3、来电30组(16位显示)，去电5组(16位显示)，贵宾35组，回拨功能。
4、键盘设置防盗功能。
5，全自动IP(32位)快速、保密拨号。
6、机械锁“0 ”。
7、预拨号及消号、回拨功能。
8、2位出局码，适应虚拟网。
9、本地区号过滤功能。
三、操作说明1、铃声设置挂机状态下连续按“铃声选择”犍，当LCD屏幕显示“TING 1至8 ”，表示有八种铃声可选。
2、功能设置挂机状态按“设置”键进入设置菜单，LCD显示“SET 1 DRTE ” ，此时用上、下查健可改变设置项，再按设置键进入该项设置。
在设置完成该项后，按设置键进入下一项设置。
所有设置均用上、下查键修改该具体设置项。
用“删除”键退出设置状态。
具体设置如下：(1)日期／时间设置：按“设置”键LCD显示“SET 1 DRTE ”，此时按设置键确认。
进入设置后，年的显示闪烁，可按上、下查键修改，完成后再按设置健进入月的设置，修改方法与年的设置相同，再按设置键可依次修改日、小时和分钟。
小时和分钟的设置可分十位和个位分别设置。
(2)设置区域码(即本地区号)：LCD会提示“SET 2 CODE ” ，此时按设置键确认，LCD 会显示“CODE - - - - - ”，进入区号的设置，第一个“-”闪烁(若已设置了区号，则显示设置的区号，区号第一个号码闪烁)。
酒店电话机使用说明书
---------------------------------------------------------------------------------------------------------------肯天酒店电话机使用说明书一、电话机特点●专业设计面板，可印制酒店徽号，电话使用指南，酒店服务设施等资料，大大提升酒店形象。
●“+10组一键通功能，酒店可设定常用拨号于不同服务皱键上。
如”前台、客房服务、商务中心、餐饮、洗衣房等信息，方便住客使用，得到快捷服务。
●留言指示灯，专业设计，可适用于所有电话交换机。
●凸面留言灯设计，光度明显，可于房内任何位置看到。
●备有内置数据接口，可接驳电脑、传真机等电讯设备。
●双音频拔号。
●方便的一键通存储功能，存储内容掉电永不丢失。
●四级循环调节免提音量。
●两级调节振铃音量。
●音乐HOLD保留功能，并机提机自动接触。
●在忘记收线或挂机不好时，自动收线。
●防雷击、抗电磁干扰设计。
●防水、防潮（独有专利、谨防仿冒）二、主要技术指标1、使用条件●环境温度：-10~+40℃●相对湿度：10%~95%●大气压力：86~106Kpa●工作频率：300~3400HZ●环境噪声：<60Db2、双音频拨号特性●标称频率低高频群：697HZ ~941HZ，1209HZ~1633HZ●单一频率的念头在标称频率的正负1.5%范围内3、电话铃特性●正常响铃时的振铃声级：>70dB三、功能设置●闪断键（R）时间设置（初始值为600ms）---------------------------------------------------------------------------------------------------------------●在挂机状态下按闪断键选择5，再选择1，进入闪断flash时间设定，按*、#键选择闪断flashr的时间。
闪断时间为：90、95、100、120、180、300、600，默认600●铃声音量与免提音量选择。
电话功能使用手册
Shijiazhuang Jiaxiang Precision Machinery Co.,Ltd电话功能使用手册电话：85968855传真：85968877内线话务员：60061. 拨打电话外线：0+外线电话内线：直拨4位分机号码2. 同组（部门）代接摘机（免提）+ 星号键3. 任意话机接指定分机摘机（免提）+715+对方分机号码4. 转接电话R键+对方分机号码5. 主持会议（普通话机）A. 拨通参会方电话，按R键+826+第二位参会人电话号码（如是外线请拨0+外线号码）B. 按两次R键，取回所有通话，即进入会议模式。
C. 可重复操作第一步，最多可以建立4组电话会议，最多8条线路参会。
（支持内外线混合）Shijiazhuang Jiaxiang Precision Machinery Co., LTD.Shijiazhuang Jiaxiang Precision Machinery Co.,Ltd6. 主持会议（数字话机）A. 拨通对方电话，按conf键+第二位参会人电话号码。
B. 接通后按两次conf进入会议。
按一次conf键继续邀请参会者。
C. 最大支持8方会议（支持内外线混合）7. 来电显示已内置并开通，如不来显请检查话机电池或联系HR部门。
数字话机公司内来电可直接显示姓名（英文）。
8. 发分机传真总机+分机号码，听到信号音,启动。
9. 呼叫转移内转内：摘机+8884+分机号码+2 无条件转移摘机+8880 取消转移功能听到“嘟”声后设置成功外（内）转外：数字话机摘机+713+6+0+外线号码+HOLD摘机+713+6 取消转接功能普通分机摘机+713+6+0+电话号码+挂机摘机+713+6+挂机取消转接功能10. 设置自动回叫对方无应答分机在线后将自动回叫此分机。
拨打对方分机+850+挂机Shijiazhuang Jiaxiang Precision Machinery Co., LTD.Shijiazhuang Jiaxiang Precision Machinery Co.,Ltd11. 上下班自动切换提示音您好，我们的工作时间是周一至周五早上8：30至下午17：10. 请直播分机号或在工作时间再拨打我们的电话，谢谢。
HA007（42）P TSDL（LCD）型液晶显示多功能按键电话机 说明书
HA007（42）使用说明书目录1．本机特点2．主要技术指标3．电话机功能图示说明4．安装5．使用方法接听电话——————————————————————手柄拨打电话————————————————————免提拨打电话————————————————————手柄通话与免提通话间的转换—————————————时钟设置——————————————————————拨号方式开关转换和音频键——————————————铃声大小开关转换——————————————————重拨键/暂停键/闪断键————————————————R键/静音键/计时键/查时键——————————————暂存键———————————————————————拨号限制——————————————————————6．存贮、运输和售后服务7．维护、保养和注意事项8．电话机原理图一、本机特点HA007（42）P/TSDL（LCD）型液晶显示多功能按键电话机，是采用先进电子线路设计而成的免提式液晶显示电话机。
本机标准话机部分均采用专用电路，组成完善的发送、接收系统，免提通话部分采用特殊电路设计，其音质清晰宏亮，铃声悦耳，工作可靠，适合于邮电、工矿企业、行政事业单位、家庭以及宾馆酒店等部门作通讯联络。
■ 脉冲/双音频兼容拨号方式免提按键电话机，可与48-60伏的市话网自动电话交换机和用户自动小型交换机配接使用。
■ 标准电话机的送、受话电路采用专用电路，噪声小、性能稳定，电路设计合理，由于有自动增益控制（AGC）电路，受外线长短变化影响小，因此远近距离通话声音大小基本不变。
■ 免提通话部分采用特殊电路设计，功耗低、输出大。
利用电话线路直接馈电，无需自备电源，既方便又可靠。
■ 采用电子音乐铃，铃声清脆悦耳，高低可调。
■ 本机设有手柄指示灯和免提指示灯，分别指示手柄通话和免提通话的工作状态。
■ 本电话机线路设计优越，功能强大，具体总结如下：（1） P/T（脉冲/双音频）开关转换和按键软转换功能。
语音电话机说明书
语音电话机使用说明书本产品通电后能自动开机，按照设定的号码与时间进行呼叫并播放语音，能根据用户按键转人工服务。
顺序呼叫号码组中的号码。
当断电中断拨号后, 重新上电会会自动呼叫剩余号码。
可以脱离电脑，独立工作。
一．使用准备1．在D盘建立一个文件夹，命名为电话机2．将接收到的文件保存于该目录3．将收到的压缩文件全部解压到当前文件夹，即电话机目录。
如下图4．安装USB驱动，即MINI-USB驱动1305．安装MP3转WA V-安装软件，即Adobe Audition 3.06．安装“WA V转BIN-安装软件”，即WT588D V oiceChip V-B二．使用步骤1．电话机设备插入SIM卡，并连接其余附件(一定要先插卡,后上电)。
如下图所示：注意!!麦克风线、耳机线不能与天线有任何交叉，否则会有严重的干扰音!!2．接通电源。
电源座旁边的系统状态灯开始闪烁，表明机器正在启动。
同时耳机座旁边的手机状态灯高亮，表示手机正在查找网络。
当手机状态灯闪烁后，系统状态灯停止闪烁，表明设备已经启动完成，处于待机状态3．打开电话机写码软件4．选择正确的串口号（通常是最后面那个，如果先插数据线后安装驱动，则重新拔插数据线）WIN7系统设置方法: 我的电脑->右击->管理->设备管理器->端口(COM和LPT), 找到USB转换成的COM号,然后打开写码软件,在串口号里,填入对应的COM号, 例如点击“读取设备参数与日志”按钮，此时软件左下角状态栏显示或此时电脑已经与电话机设备成功连接5．点击“保存参数”按钮: 。
下次再打开写码软件时，就不需要再选择串口号了6．拨打准备：在“号码组”中填写要拨打的号码或者将拨打的号码复制粘贴至号码组里7．点击“下载参数到设备”按钮，设备开始拨打号码，软件状态栏可以看到，并且电源座旁边的系统状态灯开始变亮。
此时，如果希望设备独立工作，则可将USB数据线拔掉8．暂停功能。
堡狮龙HCD133(2)TSDL电话机说明书(通用)
堡狮龙HCD133（2）TSDL电话机说明书（通用）铃声音量调节在挂机状态下，按『音量』键可循环调节铃声音量大小，共有4级音量可选，“IN9U0L 4”为最大、“IN9U0L 4”为最小“CrESC”为声音渐强。
免提音量调节在按『免提』键摘机状态下，按『音量』键可循环调节免提接收音量大小，共有2级音量可选，“HFU0L 2”为最大、“HFU0L 1”为最小。
显示亮度调节在挂机状态下，按『亮度调节』键可循环调节显示屏亮度，共有5级亮度可选，“LCD 5”为最大，“LCD 1”为最小。
菜单设置（设置菜单如有出错可按﹡#06﹡恢复默认设置，清除存储）挂机状态下按『设置』键进入设置状态，LCD显示“SE￡ 1 DA￡E”，此时可以按上查键或下查键选择设置项，LCD同时显示对应的设置项，再按『设置』键进入该项设置。
在某项设置完成后，按『设置』键确认同时将会进入下项设置，所以设置都已按『设置』键确认完成并转到下一项，用上查键或下查键修改具体设置项，按『删除』键退出设置状态，具体设置如下：设置日期/时间1.显示屏显示“SE￡1 DA￡E”，按『设置』键确认进入日期/时间设置。
2.看到年份后两位字体闪烁，此时按上查或下查键修改，完成后按『设置』键确认，并进到月的设置，修改方法与年的设置相同也是按上查键或下查键修改。
3.重复以上步骤可依次修改日、小时、分钟4.按『删除/R』键退出设置区域码1.显示屏显示“SE￡ 2 CODE”，按『设置』键确认，显示屏显示“CODE-----”2.按上查键或下查键，设置第一区域吗3.第一位设置好后，再按『设置』键确认，进入第二位设置，同上方法一样依次设置4.按『删除/R』键退出设置出局码1.显示屏显示“SE￡ 3 PCODE”，按『设置』键确认，显示屏显示“CODE—”2.按上查键或下查键设置出局码，再按『设置』键确认3.按『删除/R』退出例如：用户是公司内线直拨打外，前面需先拔“9”再拨外线电话号码的，那么“9”就是出局码，按上设置好出局码，再回拨来电，预拨号时，若号码大于或等于6位且首位与出局码不同，按『重播/回拨』键，滑稽会自动加拨9，回拨去电则不考虑添加出局码。
电话交换机使用说明书
作为公司企业在大量使用的电话交换机，很多人都了解其基本的使用方法，但是全部功能却不一定很多人都会。
小编通过总结各品牌电话交换机使用说明书，总结出通用的使用方法，希望能帮助到大家。
电话交换机简明使用方法打出:直拨对方号码转接:直拨分机号码(801~816)内部通话:先拨“*”,再拨分机号码内，外线可以同时通话,互不干扰，数码录音可将用户名称或号码录入交换机电话交换机使用说明书(详细方法)电话交换机使用注意：1.所有功能设置必须在801分机进行.2.分机必须是双音频拨号方式.3.设置功能时,如命令正确会听到"嘟..."一秒的证实音,否则听到"嘟...嘟...嘟..."的忙音.4.空闲时,电源指示灯应闪烁,否则系统有故障,应停电检查.电话交换机打出：拨打外线：提机听到电信局拨号音后,直拨对方号码即可.代拨外线：分机拨通外线后,如需呼叫另一分机与外线通话,只需要再输入"#*分机号".如经理叫秘书帮忙拨通"123456"这个号码,经理的分机是"801",秘书的分机是"802",则秘书在"802"分机上先拨通"123456",拨通后再输入"#*801"即可,此时外线听音乐，"801"分机响铃,摘机即可与外线通话.电话交换机呼出限制：A:限制市话格式:*#4nn10(n指分机号的末二位,nn=01,代表801分机,nn=16,代表816分机......依次类推)B:解除市话呼出限制格式:*#4nn00(n的意思同上)注意: (1) 限制了市话的电话交换机分机则不能打长途,限制了国内长途的分机则不能打国际长途,而限制了国际长途的分机还可以打国内长途,限制了国内长途的分机还可以打市话,这样做是合乎逻辑和实际需要的.(2) "*#4nn00"解除命令运行一次即对应分机的市话都给解开.C:限制拨出字头(2位)(1).锁一位字头格式：*#5nnm#(n的意思同上,m代表0 ~ 9 字头)(2).锁二位字头格式：*#5nnmm(n同上,mm代表二位字头)D:解除拨出字头限制格式:*#5n##((n同上)注意：此命令运行一次，即可解除对应分机的所有0 ~ 9 字头(包括二位字头)限制.E.全部分机锁一到四位字头(30组)格式：锁四位：*#5*ABCD;锁三位：*#5*ABC#;锁二位：*#5*AB##;锁一位：*#5*A###F 解除30组锁格式：*#5900电话交换机密码管理：1.设置密码格式:*#8yyyyy(y代表0 ~ 9 数字)设置密码后,个分机可通过密码打限制号码,这在实际使用中是必要的.2.拨限制号码:开锁格式:*#9yyyyy(y的意思同上)分机提机拨密码后可直拨打限制号码,挂机后密码自动关闭.电话交换机呼出限时：格式:*#6nnab (n的意义同上，ab代表01-99分钟)注意：分机通话时间可在1--99分钟内选择，出厂时定为不限时电话交换机特许拨号：格式：*#nnabcd(特许abcd 4位字头);*#nnabc#(特许abc 3位字头);*#nnab##(特许ab 2位字头)特许拨号可对锁了某些字头的分机开放有限几个字头的电话，以便能同指定的电话号码联系。
电话机用户手册说明书
USER MANUALPlug & Play with built-in OGMsPermanent memories: no tape,no battery14 minutes memory capacityCuckoo new-messageaudio reminderOne-touch Do Not Disturb functionRecordable ringerBuilt-in selectable ringing melodiesDo Not Disturb Ringer Light IndicatorDigital Receiver Volume Control3 Direct Memories and 10 Indirectphone memoriesApproved useThis telephone is approved for connection to direct exchange lines of the Public Switched Telephone Network (PSTN) and compatible PBXs (please ask your supplier for an up-to-date list) but not for connection in the following manner: • as an extension to a payphone• on a shared service line or 1 + 1 carrier system.This apparatus has been approved for the use of the following facilities:• Call screening/intercept • Memo recording• Audible and visual indication of messages • Power/message indicator • Remote accessAny other usage will invalidate the approval of the apparatus if as a result it then ceases to conform to the standards against which the approval was granted. It cannot be guaranteed that this apparatus will operate correctly under all possible conditions of connection to compatible PBXs. Any cases of difficulty should be referred in the first instance to your supplier. This apparatus is suitable for connection to PBXs that return secondary proceed indication.Please note that when connection is made to any PBX, the last number redial facility must not be used.While listening to the message playback, you can do the following:Press [7] to repeat a messagePress [8] to play/stop message playback Press [9] to skip forward to next message Press [7] [7] to play previous messagePress [0] to erase the message being played Press [1] to select Mailbox 1Press [2] to select Mailbox 2Press [3] to select Mailbox 3Press [4] to select Mailbox 4Press [5] to exit from a MailboxPress [6] to access for OTHER COMMANDS Press [] to listen to menu functionsThe Other CommandsPress [1] to switch to Answer Record mode.Press [2] to switch to Answer Only.Press [3] to switch the Answer off.Press [4] to record a new Answer Record message or to stop recording Press [5] to record a new Answer Only message or to stop recording Press [6] to activate the room monitoring function.Press [7] to change the PIN Code.Press [8] to stop/playback messages or to return to first set of commands.Press [] to listen Help Commands.Press [#] to exit the remote control functions.Note:Please use the power adaptor and telephone line cord provided in this package.Technical SpecificationPower Requirement:9V AC, 400mA Length of messages:Outgoing messages Incoming messages MemoNumber of messages:Memory Capacity (total recording time):14 minutes (approximately)minimum maximum 3 seconds-- 3 minutes 3 minutesmemory capacity60 (max.)Dear Customer,Thank you for purchasing this Philips product which has been designed and manufactured to the highest quality standards.If, unfortunately, something should go wrong with this product Philips guarantees free of charge labour and replacement parts irrespective of the country where it is repaired during a period of 12 months from date of purchase. This international Philips guarantee complements the existing national guarantee obligations to you of dealers and Philips in the country of purchase and does not affect your statutory rights as a customer.The Philips guarantee applies provided the product is handled properly for its intended use, in accordance with its operating instructions and upon presentation of the original invoice or cash receipt, indicating the date of purchase, dealer's name and model and production number of the product.The Philips guarantee may not apply if:•the documents have been altered in any way or made illegible;•the model or production number on the product has been altered, deleted,removed or made illegible;•repairs or product modifications and alterations have been executed by unauthorised service organisations or persons;•damage is caused by accidents including but not limited to lightning, water or fire,misuse or neglect.Please note that the product is not defectiveunder this guarantee in the case where modifications become necessary in order for the product to comply with local or national technical standards which apply in countries for which the product was not originally designed and/or manufactured.Therefore always check whether a product can be used in a specific country.In case your Philips product is not working correctly or is defective, please contact your Philips dealer. In the event you require service whilst in another country a dealer address can be given to you by the Philips Consumer Help Desk in that country, the telephone and fax number of which can be found in the relevant part of this booklet.In order to avoid unnecessary inconvenience, we advise you to read the operating instructions carefully before contacting your dealer. If you have questions which your dealer cannot answer or any related question please write or call:Philips Consumer Help DeskUnit 4, Elmwood, Chineham Business Park,Crockford Lane, Basingstoke, Hampshier RG24 8WG, United Kingdom.Phone : 0645 282828Fax : 01256 707335Philips Electronics Ireland Ltd Newstead Clonskeagh Dublin 14IRELANDPhone : (01)-7640000Fax : (01)-7640175U K & IRELANDyour international guaranteeOperating the remote-control featureYou can give commands to your answering machine from another telephone by entering the 4-digit remote code.1.Dial the telephone number.2.The answer machine will answer after the number of set rings. (If it is set in Answer-Off mode, it will answer after 9 rings).3.Press to activate the remote functions.4.Enter your personal remote pin code then the messages will start to playback.5.Once all the messages have been played, the voice prompt will say “No more messages ”.6.Press to listen to the Help commands.Note :If an incorrect PIN code is entered, the voice prompt will say “Incorrectcode, please try again ”. Please enter your remote code again.-There is only three attempts to enter your PIN code.-If silence is maintained for 7 seconds, the voice prompt will say “press the for help ”.-Accessing your remote control, the display will show “00”.Listening to Incoming messages from the mailboxesThere are 4 mailboxes.To listen to messages from mailbox:1.Press the , then the display will show “01”.2.If there are any new messages, the mailbox symbol will flash.3.After 2 seconds, the display will change to show a flashing number of new messages in the mailbox.4.Play the messages.5.Press the Button to skip back to the previous message or press the next button to forward to next message.To listen to messages from other mailboxes:1.To listen to messages from mailbox 2, press the again.2.The display will show the mailbox symbol and the number 2.3.Please follow the same procedure as stated above for all mailboxes.To exit from the mailboxes and return to main store:After listening to last message in mailbox 4, press the and you ’ll return to main store.Note:During the time-out after the playback of messages in a mailbox, if you donot press any keys for 30 seconds, the answering machine will return to main store.Erasing the messagesTo erase old and listened messages:1.Press the erase key for 2 seconds while no messages are playing.Note: No new messages will be erased in order to prevent accidental erase.To erase individual messages:1.Press the erase key while the message is playing or at the end of the message before the next message starts.Operating the Cuckoo FunctionThe “Cuckoo ” function is an audio reminder that will ring every 10 minutes to remind you that there is a new message.1.Press the to turn this function “On ”, then the LED light up.2.Press theagain if you wish to turn off this function.Operating the Do Not Disturb FunctionDo not disturb function offers privacy and convenience.This function switches off all audio functions from the answering machine ringer and “cuckoo ” function.1.Press the “Do Not Disturb ” button, to turn on this function, then the LED will light up.2.If you wish to turn off this function and reactivate the other functions, press “Do Not Disturb ” button.Note:When the Do Not Disturb function is “On ”, thefunction is automaticallydeactivated, and the LED is switched off.Volume ControlIf you wish to change the volume, just push the slider up or down to the desired level.Recording a MemoYou are able to leave a message for your household members through this feature.During recording, the telephone line must be inactive and the machine must be in Answer Off mode.1.Press Answer Mode Button to Answer Off mode and the Answer Off Indicator is light up.2.Press Record button.3.After the beep and the displays shows “uc ”, speak your memo.4.Press Play/Stop or Record button to stop recording.5.After the rotating “uc ” stops, the memo will playback.6.Press Answer Mode Button once or twice to restore to previous setting.LowHighSetting the Remote CodeWhen using the answering machine for the first time, the remote code is “0000”.For the sake of security, please record and use your own 4-digits Remote Code.1.Press and the VoiceHelp will say “ PIN Code is...” and the display will show “PC ”2.Press or to change each number in your code, then once the digit you desire is displayed, press to confirm. Repeat this step for all 4 digits.3.After the fourth digit is selected, press to confirm.4.Then the VoiceHelp will repeat the selected 4-digits New Remote assess code.5.The system will exit the Menu setting mode and return to stand-by mode.Note:During the setting, system will exit the Menu mode in case of:no subsequence commend for more than 30 seconds, or pressing the PLAY / STOP key, or there is an incoming call.Return to the Menu settings, press .Answer/Record mode:If you want the machine to answer as well as record the incoming calls:1.Press once or twice, then LED - ANS/REC will light up.2.After 2 seconds, the OGM will be played.Note: During playback, the display shows “A1”Answer Only:If you want the machine announce the outgoing message to the incoming calls without recording.1.Press MODE once or twice until the LED - ANS ONLY is light up.2.After 2 seconds, the OGM will be played.Note : During playback, the display shows “A2”Answer Off:To turn off the Answering Machine:1.Press once or twice until the LED - ANS OFF is light up.2.The display shows “- -”3.VoiceHelp will announce:“Answer Off mode, to record your memo, please press , to stop recording,press STOP.”4. In case of no further command within 30 seconds, the display will show the number of messages in the machine.ANS/RECANS ONLYThank you for calling, you are connected to an answering machine, please leave your message after the beep.Thank you for calling, you are connected to an answering machine, please call later.Select your answering modeELEGANCE 99 is defaulted to answer and record the incoming calls, Answer/Record mode. To hear the default Outgoing Message (OGM), press the MODE key until the display shows “A1” and the Answer/Record Indicator is light up.ANS/REC ANS ONLY ANS OFFHow to record your outgoing message:Before recording an outgoing message, please select an corresponding mode either “Answer/Record ” mode or “Answer Only ” mode:To record Answer Record message:1.Press once then Answer/Record indicator will light up2.Press during playback or within 30 seconds of completion.3.After the beep, speak your message. You will have maximum 3 minutes for your announcement.4.Press to stop recording.5.You will hear the recorded outgoing message playback.6.To record again, press and repeat step (2) to (4).7.To confirm, press and return to stand by mode.8.To erase, press during playback. Then the pre-recorded outgoing announcement will be resumed and playback.To record Answer Only:1.Press twice to select Answer Only, then Answer Only indicator will light up and you ’ll hear the current outgoing message.2.Press during playback or within 30 seconds of completion.3.After the beep, speak your message. You will have maximum 3 minutes for your announcement.4.Press to stop recording.5.You will hear the recorded outgoing message playback.6.To record again, press and repeat step (2) to (4).7.To confirm, press and return to stand by mode.Note:When the memory is full, the machine will automatically switch from AnswerRecord to Answer Only.To erase your recorded outgoing message, press during playback.Listening to incoming messagesThe display will flash, indicating the number of new messages in main store.1.Press to listen the new messages. The messages will playback from first one recorded to the last one recorded.2. If you wish to repeat the message, press to repeat the message.3. If you wish to skip the message, press .4. If you wish to erase the message, press the button while the message is playing or before the next message.Note:If there are new messages in both main store and mailboxes, the 2 digit LEDwill only signaled.- If there are no new messages in the main store but in the mailboxes, a mail box symbol will flash in the display.-If there are no new messages either in the main store or the mailbox,then the display will show the number of old messages in the main store but it will not flash.-If there are no new or old messages at all, the display will show “0”motionless.To record Incoming message in Mailboxes4 Mailboxes are providedNot only to leave message in main store, the caller can choose to leave a message in a particular mail box by pressing the mailbox key.1.The OGM message will be played after the set number of rings.2.Press the mailbox key after the OGM e.g. press (1) for Mailbox 1, press (2) for Mailbox 2. It is the same for Mailbox 3 & 4.3.The machine will start recording incoming calls in particular mailbox.or。