CNPE福清核岛室外视频会议系
V-2020 20x HD All-in-one PTZ 摄像头说明书
Model: A V-202020x HD All-in-one PTZ CameraUser ManualV1.0Please read this user manualthoroughly before using.PrefaceThank you for using this HD All-in-one PTZ Camera.This manual introduces the functions, installation process and operation of the HD camera. Prior to installation and usage, please read the manual thoroughly.PrecautionsThis product should only be used under the specified conditions in order to avoid any damage to the camera:◼Do not subject the camera to rain or moisture.◼Do not remove the cover. Otherwise, you may risk receiving an electric shock. In case of unintended equipment operation, contact an authorized engineer.◼Never operate under unspecified temperature, humidity or power supply.◼Please use soft dry cloth to clean the camera. If the camera is very dirty, clean it with diluted neutral detergent; do not use any type of solvents, which may damage the surface.Note:This is a class A production. Electromagnetic radiation at certain frequencies may affect the image quality of TV in home environment.CONTENTSAFETY GUIDES (1)PACKING LIST (2)QUICK START (2)PRODUCT HIGHLIGHTS. (3)CAMERA SPECIFICATIONS (3)CAMERA INTERFACE. (5)CAMERA DIMENSION. (5)IR REMOTE CONTROLLER. (6)VISCA IN (RS232) PORT. (9)OSD MENU (10)UVC CONTROL (13)WEB SETTINGS (14)VIEW RTSP STREAM VIA VLC (18)VISCA OVER IP (19)VISCA PROTOCOL (22)PELCO-D PROTOCOL (29)PELCO-P PROTOCOL (30)WARRANTY (32)SAFETY GUIDES1. Electric Safety Installation and operation must accord with electric safety standard.e caution to transport Avoid stress, vibration or soakage in transport, storage and installation.3. Polarity of power supplyThe power supply of this product is +12V, the max electrical current is 2A. Polarity of the power supply plug is shown in the drawing below.4. Installation precautionsDo not grasp the camera lens when carrying it. Do not touch camera lens by hand. Mechanical damage may result from doing so. Do not use in corrosive liquid, gas or solid environment to avoid any cover (plastic material) damage. Make sure there is no obstacle within rotation range. Do not power on before installation is completed.5. Do not dismantle the camera We are not responsible for any unauthorized modification or dismantling. CAUTION! Certain frequencies of electromagnetic field may affect the image of the camera!Note:Video quality may be affected by the specific frequencies of electromagnetic field.Never grasp the head of the camera, or move the camera by hand when it is working. Otherwise, mechanism maybe affected.PACKING LISTWhen unpacked, check if all supplied accessories are included:Camera ··································································· 1pcPower Adapter ··························································· 1pcPower Cable ····························································· 1pcRS232 Control Cable ··················································· 1pcUSB2.0 Cable ··························································· 1pcRemote Controller ······················································ 1pcUser Manual ····························································· 1pcDouble-sided Adhesive················································· 1pcQUICK START1. External interface: RS232 I/O, HDMI output, 3G-SDI output, USB2.0 output, LAN output, DC12V power, Audio input. Please check all connections before powering on the device.2. Dial switch settings (at the bottom of the camera):Dial Switch (ARM)SW-1 SW-2 Instruction1 OFF OFF Updating mode2 ON OFF Debugging mode3 OFF ON Undefined4 ON ON Working modePRODUCT HIGHLIGHTS▪ Adopts advanced ISP, 1/2.8-inch 2.1MP sensor, providing full HD video resolution. ▪ High-quality 20x optical zoom, 2x digital zoom lens with 60-degree field of view. ▪ IP, HDMI, 3G-SDI, USB video output interface, compatible with different applications. ▪ White Balance/ Exposure/ Focus/ Iris can be adjusted automatically or manually.▪ Support PoE+: one single CAT5/6 for video, control and power, highly efficient video encoding. ▪ Support line-in function, AAC and LPCM audio encoding.▪ Advanced focusing algorithm: fast and precise focusing performance during movement. ▪ Smooth PTZ mechanism, accurate pan tilt motor control. ▪ Up to 128 presets available.▪ Support VISCA, PELCO-P , PELCO-D and VISCA over IP control protocol; IP VISCA over both TCP and UDP.▪ Support RS232 daisy chain, up to 7 cameras under VISCA protocol. ▪ Support upside-down (ceiling) installation, H/V flip.▪ Support RS232/UVC control▪Standard UVC1.1 protocol, seamlessly compatible with all major video conferencing software and platformsCAMERA SPECIFICATIONSCAMERA INTERFACE1. Camera Lens2. Camera Base3. IR Receiver Panel4. Power Indicator Light5. Dial Switch6. Tripod Screw Hole7. Installation Hole8. RS232 Control Input9. RS232 Control Output10. HDMI Output11.3G-SDI Output12, USB Output13, RJ45 Output14.DC12V Power Jack15.Line-in Audio InputCAMERA DIMENSION(MM)IR REMOTE CONTROLLERPOWERUnder normal working mode, press POWER to enter standbymode;Press it again, the camera will start self-configuration, then goback to HOME position.It will go to preset position 0 if the preset is set.FREEZE （do NOT support USB output）Press FREEZE to freeze/ unfreeze the image.IRT (IR Transfer/IR Pass)Open / close the IR pass function. Once press the IRT key, thecamera will receive and pass the IR remote control signal to thecodec/terminal (via VISCA IN port).SET 1~SET4 ADDRESS SETTINGTo set the current camera’s address (ID), press and hold thekey for 3seconds until the backlight of that key is ON.CAM1~CAM4（CAMERA SELECTING）Press the corresponding camera number to select the camera.NUMERIC KEY (1-9)Set preset: press and hold the number for 3 seconds to set presetposition.Call preset: press the corresponding number to call presetposition.CLR PRE (CLEAR PRESET)Press CLR PRE + number key to clear the corresponding presetposition.Press and hold the key to clear all existing preset positions.FOCUSManually adjust focus, only valid under manual mode.ZOOMManually adjust zoom.NA VIGATE KEY: UP/DOWN/LEFT/RIGHTUnder camera normal mode, use navigate keys to pan/ tilt;After entering camera OSD, use navigate keys to select and enter submenu.OK /HOME KEYUnder camera normal mode, press OK to make the camera go back to its HOME position;After entering camera OSD, press OK to confirm selection.AF: Auto focusMF: Manual focusRESET: Press and hold for 3 seconds to reset cameraMENU: Enter OSD menuLEARN+LIMIT L: Set the pan tilt left limit position.LEARN+LIMIT R: Set the pan tilt right limit position.LEARN+LMT CLR: Clear all limit position.BLC OFF/ BLC ON：Back light off/onBRIGHT-/BRIGHT+: Set image brightness, only valid under bright priority exposure mode.Video Format Selection:Press and hold for 3 seconds to select different video format output.VISCA IN （RS232 PORT ）VISCA Network Construction:SERIAL PORT CONFIGURATIONNo. V_IN V_OU T VISCA IN RS485 1 DTR DTR 1 2 DSR DSR 2 3 TXD TXD 3 4 GND GND 4 5 RXD RXD 5 6 A 6 A(+) 7IR OUT 7 IR OUT 8B8B(-)VISCA IN & DB9 Connection Camera VISCA IN Windows DB-9 1 DTR 6 DSR 2 DSR 4 DTR 3 TXD 2 RXD 4 GND 5 GND 5 RXD 3 TXD 6 A (+) 7 IR OUT 8 B (-)VISCA IN &Mini DIN Connection Camera VISCAIN Mini DIN1 DTR 1 DSR2 DSR 2 DTR3 TXD 5 RXD4 GND 4 GND5 RXD 3 TXD6 A (+) 6 NC7 IR OUT7NC8 B (-) 8 NCParameter Value Parameter Value Baud rate 2400/4800/9600/115200Stop Bit 1bit Start Bit 1 bit Check BitNone Data Bit 8 bitOSD MENU1. Under working mode, press the MENU key on the IR remote controller, to enter the OSD menu as shown bellow:2. After entering the main menu, use navigate UP/DOWN keys to select the from the main menu options.3. Press RIGHT key to enter sub menu; use UP/DONW key to select the sub menu; use LEFT/RIGHT key to change current settings.4. Press MENU key again to return to the previous menu, repeat and exit the OSD menu.5. OSD Menu setting listSYSTEM PROTOCOL Optional item: VISCA/ PELCO-P/ PELCO-D Default: VISCA ADDRESS VISCA: 1~7 PELCO-P/D: 1~255 Default: 1 BAUD RATE 2400/ 4800/ 9600/ 115200 Default: 9600 PTL LOCK Protocol lock: once set, above protocol settings will be locked Default: OFF RS485 RS485 ON/OFF Default: ON VISCA OVER ALL/ OVER IP/ OVER COM Default: OVERALL LANGUAGE Chinese/ English Default: EnglishEXPOSURE EXPOSURE MODEAUTO/ MANUAL/ SHUTTER/ IRIS/ BRIGHT Default: AUTO SHUTTERShutter speed: 1/30~1/10000, only valid under MANUAL andSHUTTER modeDefault: AUTOIRIS Iris setting: CLOSE~F1.8, only valid under MANUAL andIRIS modeDefault: AUTO GAIN Gain setting:0dB~30dB, only valid under MANUAL mode Default: AUTO EBRIGHT Bright setting:0~27, only valid under BRIGHT priority mode. Default: AUTO BRIGHT 0~15 Default: 8ALL RESET Reset all settings to defaultINFO IR ADDR Camera IR control addressUSB USB firmware versionCLIENT Default client end protocol: VISCA MODEL NO. Model numberARM VER ARM firmware versionFPGA VER FPGA firmware versionCAM VER Camera versionRELEASE Software release dateSET IP ADDRESS IN MENUIn order to facilitate customer debugging, the camera supports IP address configuration under OSD.1. Press "MENU" to enter the camera OSD, then select “IP”;2. Press “ ” navigation key to enter the IP setting interface. Select the parameter needs to be changed using the navigation “ ” and “ ”keys”;3. Use numeric keys to set the corresponding parameters. After finishing entering, press the "MENU" again to complete and save the setting;4. Press "MENU" again to exit menu.UVC CONTROL1. Make sure the USB2.0 camera output is connected to the USB2.0 port on the PC/MAC, and it is recognized by the PC Device Manager. If connected to the USB3.0 port, video resolution may be compromised.2. The interval of control commands sending from the server (via USB) to the camera should be no less than 250ms.PU_BRIGHTNESS_CONTROL 81 01 04 4d 00 00 0p 0q FFPU_CONTRAST_CONTROL 81 01 04 A2 00 00 0p 0q FFPU_SATURATION_CONTROL 81 01 04 A1 00 00 0p 0q FFPU_SHARPNESS_CONTROL 8x 01 04 42 00 00 0p 0q FFPU_GAMMA_CONTROL 8x 01 04 5B 0p FFPU_WHITE_BALANCE_TEMPERATURE_CONTROL 8x 01 04 35 0X FFPU_BACKLIGHT_COMPENSATION_CONTROL 81 01 04 33 02/03 FFPU_POWER_LINE_FREQUENCY_CONTROL 8x 01 04 AA 00/01/02 FFCT_ZOOM_ABSOLUTE_CONTROL 8x 01 04 47 0p 0q 0r 0s FFCT_PANTILT_ABSOLUTE_CONTROL 8x 01 06 02 VV WW 0Y 0Y 0Y 0Y 0Z 0Z 0Z 0Z F CT_PANTILT_RELATIVE_CONTROL 8x 01 06 01 pp qq rr ss FFCT_ZOOM_RELATIVE_CONTROL 8x 01 04 07 pp FFWEB SETTINGS1.Download and install Flash PlayerWhen access the camera via Internet Explorer browser for the first time, Flash Player needs to be installed. We recommend users download it from flash official website to get latest version:https:///englishAfter installation is complete, it will be listed in PC’s Programs and Features Control Panel:2.LoginTo access the camera interface, open IE browser, input IP address(default IP address is 192.168.1.188). Users can select language(Chinese/English). Default username: admin Default password:admin3.Real-time PreviewWhen log in to the web interface for the first time, a message below will show. Please go to IE browser “Settings”, allow pop-ups and allow running Flash Player.On the Preview interface shown above, there is a virtual control panel on the right-hand side. Options include pan, tilt, zoom, focus, presets, focus speed and zoom speed. On the bottom of image preview, main stream and sub stream preview can be selected.4.ConfigurationClick “Setting” to enter camera configuration interface shown below:Video Encode: To set image encoding mode, main stream and sub stream resolution/bit rate/frame rate, bit rate control option, I frame interval, etc. as shown above.Video Transmission: To set RTMP settings.Audio Setting: To enable/disable embedded audio. Audio encoding mode can be selected. Parameters such as sampling rate and bit rate can be adjusted.Image Parameter: To set focus, exposure, white balance, image, image quality, noise-reduction, etc.Ethernet: To set DHCP mode, IP address, subnet mask, default gateway, http port, web port, main stream port and sub stream port. Default settings are as following:DHCP OFF Default gateway 192.168.1.1IP address 192.168.1.188 HTTP port 80Subnet mask 255.255.255.0 RTSP port 554Firmware upgrade: To update the camera ISP. Steps are shown below:Click “clicking to upload file”, in the dialog box, select the upgrade file. Click “upgrade”to start the updating process.DO NOT power off or do any operation when upgrading. Please reboot the camera at least 5 min after the upgrade is finished.Then re-login to web interface, select “Reset all” to reset the camera completely.Reset to default: To reset the camera to default settings.Reset simply: reset camera image settings; Reset completely: reset all camera settings including IP configurations, image settings, language and protocol; Reboot: reboot ISP part of the camera.Account Setting: To set camera account username and password.USING VLC TO VIEW RTSP/RTMP VIDEODefault RTSP main streaming URL: rtsp://192.168.1.188/stream/mainDefault RTSP sub streaming URL: rtsp://192.168.1.188/stream/subDefault RTMP main streaming URL: rtmp://192.168.1.188:1935/app/rtmpstream0Default RTMP sub streaming URL: rtmp://192.168.1.188:1935/app/rtmpstream1VISCA OVER IPVISCA over IP means VISCA protocol transmit via IP.This can be used to reduce RS232/RS485 cable layout(the controller must support IP communication function).Communication port specs:⚫Control port: RJ45 Gigabit LAN⚫IP protocol: IPv4⚫Transmit protocol: UDP⚫IP address: set via web interface or OSD menu⚫Port address: 52381⚫Confirm send/transmission control: depend on applied program⚫Applied range: in the same segment, not suitable for bridge network.⚫To apply, enter camera OSD, choose VISCA option: OVER IPHow to use VISCA over IPVISCA CommandCommands are sent from controller to peripheral equipment (camera), and when peripheral equipment receives commands, it returns ACK. When the command is executed, a complete message will be returned.VISCA InquiryInquiry is sent from controller to peripheral equipment (camera), and when peripheral equipment receives the command, it will return required message.VISCA ReplyIt is sent from peripheral equipment (camera) to controller. ACK, which is the complete message, can be either reply or error reply.Command format: Note that LAN output is big-endian, and LSB is in the front.Payload type: data definitions are listed below:Name Value (Byte 0) Value (Byte 0) Value (Byte 0)VISCA command 0x01 0x00 Stores the VISCA command.VISCA inquiry 0x01 0x10 Stores the VISCA inquiry.VISCA reply 0x01 0x11 Stores the reply for the VISCA command and VISCA inquiry, or VISCA device setting command.VISCA devicesetting command0x01 0x20 Stores the VISCA device setting command.Control command 0x02 0x00 Stores the control command.Control reply 0x02 0x01 Stores the reply for the control command.Payload length: V alid data length in Payload (1~16), is the command length.For example, when valid data length is 16-byte, Byte 2: 0x00; Byte 3: 0x10Controller will save sequence number of each command, when one command sent, the sequence number of the command will add 1; when the sequence number reaches the max, it will return back to 0. The peripheral equipment will save sequence number of each command, and return the sequence number to controller.Payload: According to Payload type, the following data will be saved.⚫VISCA command: Save VISCA command packet⚫VISCA inquiry: Save VISCA message packet⚫VISCA reply: Save VISCA return packet⚫VISCA device setting command: Save VISCA equipment setting command packet.⚫Control command: The following data is saved in control command payload⚫Controlled reply: The following data is saved in return command payload of control command.Delivery confirmation:VISCA over IP uses UDP as transmission communication protocol. UDP communication message transmission is not stable, it is necessary to confirm delivery and resent in application.Generally, when controller sends a command to peripheral equipment, controller will wait for the return message then send the next command, we can detect and confirm if the peripheral equipment receive the commands from its return message’s lag time. If controller detects it overtime, it is regarded as error transmission. Controller will resend the commands to check peripheral’s status. The resent command sequence number is same as the last one. Following chart lists possible received message and the corresponding status after the resent command.Note: Do not change IP address, subnet mask, or gateway parameters under VISCA over IP mode, otherwise, it will cause network inconsistency.VISCA PROTOCOLPart1 Camera Return CommandsAck/Completion MessageCommand Packet NoteACK z0 41 FF Returned when the command is accepted. Completi onz0 51 FFReturned when the command has been executed.z = camera adderss+8Error MessagesCommand Packet NoteSyntax Error z0 60 02 FF Returned when the command format is different or when a command with illegal command parameters is acceptedCommand Not Executablez0 61 41 FFReturned when a command cannot be executed due to current conditions. For example, when commands controlling the focus manually are received during auto focus.Part 2 Camera Control CommandsCommand type function commandAddressSetBroadcast88 30 01 FFAddress settingSequence chart when command lostSequence chart when returned message lostPart 2 Camera Control CommandNote: 【x】means the camera address: 【y】=【x + 8】. VISCA Pan Tilt Absolute Position V alueVISCA Pan Tilt Speed ValuePELCO-D PROTOCOL COMMAND LISTPELCO-P PROTOCOL COMMAND LISTWarrantyThank you for your interest in the products of AVIPAS Inc.This Limited Warranty applies to HD Conference Camera purchased from AVIPAS Inc.This Limited Warranty covers any defect in material and workmanship under normal use within the Warranty Period. AVIPAS Inc. will repair or replace the qualified products at no charge.AVIPAS Inc. provides a two (2)-year warranty (from the date of purchase) for this HD Conference Camera.This Limited Warranty does not cover problems including but not limited to: improper handling, malfunction or damage not resulting from defects in material.To receive warranty service, please contact AVIPAS Inc. first. We will decide whether a repair or replacement is needed and will advise you of the cost of such repair or replacement.Copyright NoticeAll contents of this manual, whose copyright belongs to our Corporation cannot be cloned, copied or translated without the permission of the company. Product specifications and information which were referred to in this document are for reference only. We may alter the content at any time and without prior notice.VER: 2020-07-14 (EN)AViPAS Inc.Address: 4320 Stevens Creek Blvd. Suite 227San Jose, CA 95129Phone: 1-844-228-4727Fax: (408) 228-8438Email: ***************Website: 32。
ConferenceSHOT 10 企业级 PTZ 会议摄像头安装指南说明书
Installation Guide for ConferenceSHOT10 Enterprise-Class PTZ Conferencing CameraDocument411-0002-31Rev CJanuary2017ContentsOverview3 What's in this Guide3 Features3 Unpacking the Camera4A Quick Look at the Camera6Back of the Camera6 Switch Settings6 Installation8 Before You Install the Camera8 Don’t Void Your Warranty!8 Cabling Notes9 Installing the Wall Mount10 About Ceiling-Mounted Cameras10 Installing the Camera11 Connecting the Camera12 Powering Up the Camera12 Status Light12 Next Steps13 Operation,Storage,and Care13 Compliance Statements and Declarations of Conformity14 FCC Part15Compliance14 ICES-003Compliance14 European Compliance15 Warranty Information16 Index17This guide covers the ConferenceSHOT10enterprise-class PTZconferencing camera:n ConferenceSHOT10camera(silver),North America–part number999-9990-000n ConferenceSHOT10camera(silver),Europe and UK–part number999-9990-001n ConferenceSHOT10camera(white),North America–part number999-9990-000Wn ConferenceSHOT10camera(white),Europe and UK–part number999-9990-001WWhat's in this GuideThis guide covers:n Unpacking the cameran Tips for a successful installationn Instructions for installing the camera mountn Information on connecting and mounting the cameran Camera power-onComplete product information is available in the Integrator's Complete Guide to ConferenceSHOT10Enterprise-Class PTZ Conferencing Cameras.Featuresn PTZ camera for huddle rooms and small to medium conference roomsn 2.14Megapixel(effective),full HD(native1080p/60)image sensorn10x optical zoom,horizontal field of view of74°in super-wide moden Smooth,silent direct-drive motors for precise pan and tilt movements at up to90°per secondn Simultaneous uncompressed USB3.0and IP(H.264)streaming outputs at resolutions up to1080p/60 n Precise pan and tilt movements at up to90°per second with smooth,silent direct-drive motorsn Universal Video Class(UVC)drivers supported in Windows®,Mac®OS,and Linux operating systems, compatible with most UC conferencing applicationsn Presenter-friendly IR remote controln Integration-ready Telnet or serial RS-232controln Full administrative control via web interface;manage remotely while monitoring the stream separately.Unpacking the CameraMake sure you received all the items you expected.Here are the packing lists for the ConferenceSHOT10 cameras.Caution:Use the power supply shipped with the ing a different power supply may create an unsafe operating condition or damage the camera,and will void the warranty.CautionAlways support the camera's body when picking it up.Lifting the camera by its head or mounting arm will damage it.North AmericaConferenceSHOT10camera,silver/black,part number999-9990-000ConferenceSHOT10camera,white,part number999-9990-000WThe box should contain one of each item listed here:n Camera,part number998-9990-000(silver/black)or998-9990-000W(white)n Vaddio IR Remote Commandern12VDC,3.0Amp switching power supplyn AC cord set,North American Thin Profile Wall Mount with mounting hardware,black or white depending on camera colorn RS-232control adaptern USB3.0Type A to Type B cable,6ft.(1.8m)n Quick Start Guide,part number342-1117Europe and UKConferenceSHOT10camera,silver/black,part number999-9990-001ConferenceSHOT10camera,white,part number999-9990-001WThe box should contain one of each item listed here:n Camera,part number998-9990-000(silver/black)or998-9990-000W(white)n Vaddio IR Remote Commandern12VDC,3.0Amp switching power supplyn AC cord set,Europen AC cord set,UKn Thin Profile Wall Mount with mounting hardware,black or white depending on camera colorn RS-232control adaptern USB3.0Type A to Type B cable,6ft.(1.8m)n Quick Start Guide,part number342-1117Australia and New ZealandConferenceSHOT10camera,silver/black,part number999-9990-009ConferenceSHOT10camera,white,part number999-9990-009WThe box should contain one of each item listed here:n Camera,part number998-9990-000(silver/black)or998-9990-000W(white)n VaddioIR Remote Commandern12VDC,3.0Amp switching power supplyn AC cord set,Australia/New Zealandn Thin Profile Wall Mount with mounting hardware,black or white depending on camera colorn RS-232control adaptern USB3.0Type A to Type B cable,6ft.(1.8m)n Quick Start Guide,part number342-1117Download manuals,dimensional drawings,and other information from /support.A Quick Look at the Cameran Camera and zoom lens:The ConferenceSHOT10camera features a10X optical zoom lens(11X in Super-Wide mode).n IR sensors:Sensors in the front of the camera base receive signals from the remote.Make sure there's nothing directly in front of the camera base,and point the remote at the camera.n Status light:The multi-colored LED indicates the camera's current state.Back of the Cameran12VDC,3.0Amp power connector–Connect only the power supply shipped with the camera.n USB3.0type B video device connector–Streams uncompressed UVC standard videon Ethernet RJ-45–Connect to the network for IP streaming and camera control via web interface or Telnetn DIP switches–Set IR frequency,IR on/off,and image flip(camera is invertible)n RS-232port–Connect to a controller to manage the camera using a modified VISCA protocol. Switch SettingsThe camera uses DIP switches to determine certain camera functions.A label on the bottom of the camera provides a quick reference for setting the switches.When the camera is right side up,switches are in their default positions when they are up.IR Frequency Selection:The IR Remote Commander can control up to three cameras in the same room with different IR e switches1and2to select the frequency to identify the camera as camera1,2,or3;then use the Camera Select buttons at the top of the remote to select the camera you want to control.Inverted operation:If mounting the camera upside-down,set switch3to the DOWN position:IMAGE FLIP ON.Switch4is not currently used.NoteThe web interface provides baud rate and super-wide mode settings.See Web Tasks for Administrators: Soft Switch Settings,Reboots,Resets,and Updates.InstallationThis section covers siting the camera,installing the mount,and installing the camera.Before You Install the CameraAll ConferenceSHOT cameras include a wall mount.n Choose a camera mounting location that will optimize camera performance.Consider camera viewing angles,lighting conditions,line-of-sight obstructions,and in-wall obstructions where the camera is to be mounted.n Ensure that the camera body can move freely and point away from the ceiling and lights.The camera will not perform well if it is pointed toward a light source such as a light fixture or window.n Follow the installation instructions included with the camera mount.NoteDome enclosures are not recommended for ConferenceSHOT10cameras.Don’t Void Your Warranty!CautionThis product is for indoor use.Do not install it outdoors or in a humid environment without the appropriate protective enclosure.Do not allow it to come into contact with any liquid.Use only the power supply included with this ing a different one will void the warranty,and could create unsafe operating conditions or damage the product.Do not install or operate this product if it has been dropped,damaged,or exposed to liquids.If any of these things happen,return it to Vaddio for safety and functional testing.Learn more at /products.Cabling NotesFor RJ-45terminated cables,use Cat-5e or better cable and standard RJ-45connectors (568B termination).We recommend using high-quality connectors and crimping tools.A DE-9F (DB-9F)adapter is supplied with the camera for making RS-232connections to a third-party control system such as AMX or Crestron.NoteUse standard RJ-45connectors and a good crimping tool.Do not use pass-through RJ-45connectors.Poorly crimped connectors can damage the connectors on the product,cause intermittent connections,and degrade signal quality.Test cable pin-outs and continuity before connecting them.Intact –Contact fingers will make reliablecontact with the cable connector Damaged –Some contact fingers are bent and will NOT make reliable contact with thecable connectorPro TipLabel all cables at both ends.Installing the Wall MountYou can install the camera wall mount to a2-gang wall box or directly to the drywall.n If you mount it to drywall,use the wall anchors provided with the wall mount.n If you mount it to a wall box,use the cover plate screws supplied with the wall box.NoteDome installation is not recommended.About Ceiling-Mounted CamerasIf you use an inverted mount,set the camera's Image Flip DIP switch ON for inverted operation.See Switch Settings for more information.CautionBefore you start,be sure you can identify all cables correctly.Connecting a cable to the wrong port can result in equipment damage.Caution:Check Cat-5cables for continuity before using ing the wrong pin-out may damage the camera system and void the warranty.Pro tip:Label your cables.1.Route the cables through the opening in the mounting shelf.2.Connect the cables to the camera.Caution:Use the power supply shipped with the ing a different power supply will damage the camera and void the warranty,and may create an unsafe operating condition.3.Place the camera on the mount.4.Attach the camera to the mount using the¼”-20x.375mounting screw supplied with the camera.Image for illustration only;not to scale.Camera and mount details may differ.NoteIf the camera is jostled or bumped,it may require a pan-tilt reset.Here is an example of how the camera might be set up in a medium-size conference room.In this setup,a PC uses a unified communications conferencing application to manage the camera and an EasyUSB Mixer/Amp with attached microphones and speakers.NoteConferenceSHOT10camera output is USB3.0;EasyUSB Mixer/Amp is USB2.0.Powering Up the CameraConnect camera power.The camera will initialize and move.This will take a few seconds. When an image is available,the camera is ready to accept control information.Status LightThe light in the camera's base indicates its current state.n Blue–Camera is activen Purple–Standby mode or bootingn Yellow–Firmware update is in progressn Blinking blue–USB cable is disconnectedn Blinking yellow–Motor out of calibrationn Blinking purple–ErrorCautionDo not remove power or reset the camera while the indicator is yellow,showing a firmware update in progress.Interrupting a firmware update can make the camera unusable.Next StepsThe camera is now ready to configure and use.This information is available in the Configuration and Administration Guide for ConferenceSHOT10Enterprise-Class PTZ Conferencing Camera.It is also included in the Integrator's Complete Guide to ConferenceSHOT10Enterprise-Class PTZ Conferencing Camera.Operation,Storage,and CareFor smears or smudges on the product,wipe with a clean,soft e a lens cleaner on the lens.Do not use any abrasive chemicals.Keep this device away from food and liquids.Do not operate or store the device under any of the following conditions:n Temperatures above40°C(104°F)or below0°C(32°F)n High humidity,condensing or wet environmentsn Inclement weathern Severe vibrationn Between converging tectonic platesn Dry environments with an excess of static dischargeDo not attempt to take this product apart.There are no user-serviceable components inside.Compliance Statements and Declarations of ConformityCompliance testing was performed to the following regulations:FCC Part15(15.107,15.109),Subpart B Class AICES-003,Issue54: 2012Class AEMC Directive2004/108/EC Class AEN55022:December2010Class AEN55024:November2010Class AKN222008(CISPR22:2006)Class AKN242008(CISPR24:1997+A1:2000+A2:2002)Class AIEC60950-1:2005(2nd Edition);Am1:2009+Am2:2013SafetyEN60950-1:2006+A11:2009+A1:2010+A12:2011+A2:2013SafetyFCC Part15ComplianceThis equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part15,Subpart B,of the FCC Rules. These limits are designed to providereasonable protection against harmful interference when the equipment is operated in acommercial environment.This equipment generates,uses,and can radiate radio frequency energy and,if not installed and used in accordance with the instruction manual,may cause harmful interference to radio communications.Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his/her own expense.Operation is subject to the following two conditions:(1)This device may not cause interference,and(2) This device must accept any interference including interference that may cause undesired operation of the device.Changes or modifications not expressly approved by Vaddio can affect emission compliance and could void the user’s authority to operate this equipment.ICES-003ComplianceThis digital apparatus does not exceed the Class A limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications.Le présent appareil numérique n’emet pas de bruits radioélectriquesdépassant les limites applicables aux appareils numeriques de la classe Apréscrites dans le Règlement sur le brouillage radioélectriqueédicte par le ministère des Communications du Canada.European ComplianceThis product has been evaluated for electromagnetic compatibility under the EMC Directive for Emissions and Immunity and meets the requirements for a Class A digital device. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.Standard(s)To Which Conformity Is Declared:EMC Directive2004/108/ECEN55022:December2010Conducted and Radiated Emissions EN55024:November2010ImmunityEN61000-4-2:1995+Amendments A1:1998+A2:2001Electrostatic DischargeEN61000-4-3:2006+A1:2008Radiated ImmunityEN61000-4-4:2004+Corrigendum2006Electrical Fast TransientsEN61000-4-5:2006Surge ImmunityEN61000-4-6:2009Conducted ImmunityEN61000-4-8:2010Power Frequency Magnetic FieldEN61000-4-11:2004Voltage Dips,Interrupts and FluctuationsKN222008(CISPR22:2006)Conducted and Radiated Emissions KN242008(CISPR24:1997+A1:2000+A2:2002)IT Immunity CharacteristicsEN61000-4-2Electrostatic DischargeEN61000-4-3Radiated ImmunityEN61000-4-4Electrical Fast TransientsEN61000-4-5Surge ImmunityEN61000-4-6Conducted ImmunityEN61000-4-8Power Frequency Magnetic FieldEN61000-4-11Voltage Dips,Interrupts and FluctuationsIEC60950-1:2005(2nd Edition);Am1:2009+Am2:2013Safety EN60950-1:2006+A11:2009+A1:2010+A12:2011+A2:2013SafetyWarranty InformationSee Vaddio Warranty,Service and Return Policies posted on for complete details. Hardware*warranty:Two(2)year limited warranty on all parts and labor for Vaddio manufactured products. Vaddio warrants its manufactured products against defects in materials and workmanship for a period of two years from the day of purchase,to the original purchaser,if Vaddio receives notice of such defects during the warranty. Vaddio,at its option,will repair or replace products that prove to be defective. Vaddio manufactures its hardware products from parts and components that are new or equivalent to new in accordance with industry standard practices.Exclusions: The above warranty shall not apply to defects resulting from improper or inadequate maintenance by the customer,customers applied software or interfacing,unauthorized modifications or misuse,mishandling,operation outside the normal environmental specifications for the product,use of the incorrect power supply,modified power supply or improper site operation and maintenance. OEM and special order products manufactured by other companies are excluded and are covered by the manufacturer’s warranty.Vaddio Customer Service: Vaddio will test,repair,or replace the product or products without charge if the unit is under warranty. If the product is out of warranty,Vaddio will test then repair the product or products. The cost of parts and labor charge will be estimated by a technician and confirmed by the customer prior to repair. All components must be returned for testing as a complete unit. Vaddio will not accept responsibility for shipment after it has left the premises.Vaddio Technical Support: Vaddio technicians will determine and discuss with the customer the criteria for repair costs and/or replacement.Vaddio Technical Support can be contacted by email at******************or by phone at one of the phone numbers listed on .Return Material Authorization(RMA)number: Before returning a product for repair or replacement request an RMA from Vaddio’s technical support. Provide the technician with a return phone number,e-mail address,shipping address,product serial numbers and original purchase order number. Describe the reason for repairs or returns as well as the date of purchase.See the General RMA Terms and Procedures section for more information.RMAs are valid for30days and will be issued to Vaddio dealers only. End users must return products through Vaddio dealers.Include the assigned RMA number in all correspondence with Vaddio. Write the assigned RMA number clearly on the shipping label of the box when returning the product. All products returned for credit are subject to a restocking charge without exception. Special order product are not returnable.Voided varranty: The warranty does not apply if the original serial number has been removed or if the product has been disassembled or damaged through misuse,accident,modifications,use of incorrect power supply,use of a modified power supply or unauthorized repair.Shipping and handling: Vaddio will not pay for inbound shipping transportation or insurance charges or accept any responsibility for laws and ordinances from inbound transit. Vaddio will pay for outbound shipping,transportation,and insurance charges for all items under warranty but will not assume responsibility for loss and/or damage by the outbound freight carrier. If the return shipment appears damaged,retain the original boxes and packing material for inspection by the carrier. Contact your carrier immediately.Products not under warranty:Payment arrangements are required before outbound shipment for all out of warranty products.IndexAanatomy of the camera6Ccable connectors6,9camera mount8,10installing10camera placement8ceiling-mounted cameras10cleaning13color codes for status light12connection diagram12connectors6Ddamage,preventing4,8-9diagram,connection12DIP switches6location6settings6EEthernet port6Iindicator light,meaning of colors12 installation10,12basic connections12camera mount10inverted installation10Llight,status indicator12location of the camera8locations of connectors6Mmount8,10mounting the camera8,11Nnetwork port6Ooperating environment8,13Ppacking list4part numbers4precautions4,8for operating the system8 product returns and repairs16Rrequirements8installation8mounting8RJ-45connectors9Sshelf-mounted cameras11shelf,camera mount10status light12meanings of colors12storage environment13switch location6switch settings6,10camera ID(DIP switch)6image flip(DIP switch)6,10Ttemperature,operating and storage13 UUSB port6Wwall mount10installing10warranty8,16Vaddio is a brand of Milestone AV Technologies·Phone800.572.2011/+1.763.971.4400·Fax+1.763.971.4464·Email***************Visit us at for firmware updates,specifications,drawings,manuals,technical support information,and more.Vaddio,ConferenceSHOT,RoboSHOT,and EasyUSB are trademarks or registered trademarks of Milestone AV Technologies.All other brand names or marks are used for identification purposes and are trademarks of their respective owners.In British Columbia,Milestone AV Technologies ULC carries on business as MAVT Milestone AV Technologies ULC.©2017Milestone AV Technologies。
视频会议系统建设实施方案
视频会议系统建设实施方案（此文档为word格式,下载后您可任意修改编辑！）目录1前言 (4)2用户需求分析 (6)2.1项目背景 (6)2.2项目的需求分析 (6)3视频会议组网设计方案 (8)3.1工程需求分析 (8)3.2视频会议配置清单 (11)3.3某某视频网络结构设计 (11)3.4设备使用及连接简介 (12)3.4.1高清视频会议终端设备－ HDX 9000系列 (12)3.4.2高清多点会议控制单元－ RMX 2000 (18)3.5某某产品功能特点介绍 (19)3.5.1RMX 2000电信级MCU功能特点 (19)3.5.2HDX 9000高清视频终端功能特点 (21)4视频会议系统会议功能 (24)4.1终端点对点视频会议 (24)4.2多点视频会议 (24)4.3多组多点视频会议 (24)4.4多分屏视频会议 (25)4.5混合视频会议 (25)4.6双流数据协作会议 (26)4.7PONC数据协作会议 (26)4.8多点会议的召开方式 (27)4.9多点会议的控制方式 (27)4.10电话加入应急指挥会议 (28)4.11电话备份视频会议 (29)4.12AES加密会议 (29)4.13双显仿真的应用 (30)4.14打造最好的声音和图像会议效果 (30)4.15灵活、方便的使用和管理方式 (31)4.16系统管理的安全性 (31)4.17面向未来的先进系统 (32)4.18会议的存储和直播 (32)5视频会议系统的安全管理方案 (33)5.1MCU的安全保障 (33)5.2终端的安全管理 (35)5.3会议的安全管理 (35)6系统扩展方案 (37)7会议室设计参考 (38)7.1发言系统 (38)7.2视频系统 (39)7.3音频系统 (39)7.4集中控制系统 (40)8视频会议室布置及装修建议 (41)8.1会议室大小 (41)8.2会议室的环境 (41)8.3会议室的布局 (42)8.4会议室的照度 (43)8.5会议室的音响效果 (43)8.6图像显示方式 (45)8.7供电 (46)8.8电源要求 (46)8.9会议室供电系统 (46)9产品性能指标 (48)9.1某某RMX 2000 (48)9.2某某HDX 9000系列 (52)1前言本技术方案是在充分了解某某视频会议需求的基础上，结合我们多年大型项目的经验，采用业界领先的某某公司产品，精心设计的一个完整技术方案。
LG AN-VC500 摄像头视频会议室手册说明书
MANUAL DE USUARIOCámara de videollamada Antes de utilizar el equipo, lea este manual con atención y consérvelo para consultarlo cuando lo necesite.AN-VC5002CONTENIDODescripción general .............................................3Instalación de la cámara de videollamada .. (4)Inicie Skype ..........................................................5Crear cuenta / Iniciar sesión ..............................5Menú de Skype . (6)Contactos ..........................................................................6Agregar contacto ..........................................................6Llamar a teléfonos ..........................................................6Historial ...............................................................................7Mi información ..................................................................7Ajuste (7)Realizar una videollamada al contacto ..............8Realizar una llamada (sólo de voz) a un contacto .....9Recepción de una llamada .. (10)Inicie Skype ..........................................................11Crear cuenta / Iniciar sesión ..............................11Menú de Skype (12)CONTACTOS .................................................................12AGREGAR UN CONTACTO .......................................12Llamar a un teléfono ....................................................12HISTORIAL ......................................................................13MI PERFIL .......................................................................13CONFIGURACIÓN .. (13)Realizar una llamada de vídeo al contacto ......14Realizar una llamada (sólo de voz) a un contacto .....15Recepción de una llamada .. (16)Resolución de problemas (17)Especificaciones del producto (18)3PREPARATIVOSPREPARATIVOSDESCRIPCIÓN GENERALNo realice llamadas deemergencia a través de SkypeSkype no es un servicio sustituto del teléfono y no sepuede utilizar para las llamadas de emergencia.Lentesoportesoporte4PREPARATIVOSPREPARATIVOSINSTALACIÓN DE LA CÁMARA DE VIDEOLLAMADATVDoble el soporte.23(A) A segure el soporte de la TV a la partetrasera de la TV mediante el soporte de imán.(B) S i tiene problemas para ajustar el soporte oquiere evitar que se deslice, utilice la cinta de velcro para fijar la instalación.Despliegue el soporte y colóquelo en la parte superior central del equipo de TV.1Cámara de videollamadaAV IN 2U S B I N 2U S B I N 3(A)(B)Velcro5UTILIZACIÓN DE SkypeCREAR CUENTA / INICIAR SESIÓNTras seleccionar el icono de Skype en el menúPremium, escriba su nombre de usuario y contraseña de Skype. Seleccione "Iniciar sesión automáticamente" para iniciar la sesión automáticamente cuando se encienda la TV.A#UTILIZACIÓN DE Skype (NetCast Smart TV)INICIE SkypeMANDO A DISTANCIA NORMAL1Pulse2Inicie Skype .MANDO A DISTANCIA MÁGICO1Pulse2Inicie Skype .6UTILIZACIÓN DE SkypeMENÚ DE SkypeContactosEsta es la lista de contactos. Para obtener más información sobre cómo realizar una llamada, consulte las páginas 9 y 10.Llamar a teléfonosSeleccione un país al que desearía llamar y escriba unnúmero de teléfono. Seleccione “Llamar a este ”.Agregar contactoCuando pulse el botón ROJO del mando a distancia en la lista de contactos, aparecerá la siguiente pantalla. Esto permite buscar o añadir usuarios.Pulse el botón “Buscar ” para iniciar una búsqueda o pulse el botón “Cancelar ” para volver al menú anterior.Mi nombreMi nombreMi nombreAgregar contacto Llamar a teléfonos Historial Mi información AjusteContactos Historial Mi información Ajuste No llevo reloj.Me gusta que mis brazos pesen lo mismo...Buscar Llamada a esteA#SalirSalir7UTILIZACIÓN DE SkypeAjusteEl menú Ajuste incluye "Notificaciones", "Desvío dellamada", "Privacidad", "Configuración de vídeo" y "Cambiar contraseña".MENÚ DE Skype (CONTINUACIÓN)HistorialMuestra T odas las llamadas/Mensajes de voz/Solicitudes de autorización.Si se selecciona "T odas las llamadas", puede comprobar las llamadas perdidas, las llamadas recibidas y las llamadas realizadas.Puede comprobar la lista de eventos recibidosseleccionando "Mensajes de voz" o " Solicitudes de autorización".Los números a la derecha de cada elemento indican el número de elementos no comprobados.Mi informaciónEl menú de información está compuesto por "Mi estado", "Cambiar…", "Mi perfil" y "Ver mi cuenta".Mi nombreMi nombreMi nombreContactos Llamar a teléfonos Mi información AjusteContactos Llamar a teléfonos Historial AjusteContactos Llamar a teléfonos Historial Mi informaciónSalirSalirSalir8UTILIZACIÓN DE SkypeREALIZAR UNA VIDEOLLAMADA AL CONTACTOSeleccione un contacto de la lista de contactos.Pulse el botón “Videollamada ”.CríticaBajaNormalMi nombreLlamar a teléfonos Historial Mi información AjusteNo llevo reloj.Me gusta que mis brazos pesen lo mismo...1234657891I nvitar personas / Añadir personas: Para añadir un miembro a la conversación.2 M odo de pantalla : Para cambiar a la ventana de vídeo.3 Cámara ampliar/reducir : amplía o reduce el vídeo.4 A mpliación local : La imagen ampliada se enviará ala otra parte mediante “the pointing zoom feature” (la función de zoom orientado). La imagenampliada es una de las nueve partes en que sedivide la cuadrícula.5D etener mi vídeo: el vídeo desaparece y la parteconectada tampoco puede verlo.6S ilenciar micrófono: silencia el micrófono y la parteconectada no puede escuchar la voz.7Finalizar llamada : finaliza la llamada.8 P oner llamada en espera : mantiene la llamada enespera hasta que se pulse el botón “Reanudar llamada ”.9C alidad de llamada : la calidad del vídeo puedeverse afectada por las condiciones de la red.1243567O9UTILIZACIÓN DE SkypeREALIZAR UNA LLAMADA (SÓLO DE VOZ) A UN CONTACTOSeleccione un contacto de la lista de contactos. Pulse el botón “Llamar a este usuario ”.Una vez registrado el número de teléfono de un contacto, puede seleccionar entre los números de teléfono y el nombre de usuario del contacto.Mi nombre1234Llamar a teléfonos Historial Mi información Ajuste567No llevo reloj. Me gusta que mis brazos pesen lo mismo...No llevo reloj. Me gusta que mis brazos pesen lo mismo...1Invitar personas / Añadir personas: Para añadir un miembro a la conversación.2 M odo de pantalla : Para cambiar a la ventana de vídeo.3 T eclado de marcado / T eclado de marcado : abre un tecladonumérico.4 Iniciar mi vídeo : comparte el vídeo con la parte conectada.5S ilenciar micrófono : silencia el audio. La parte conectada nopuede oír el audio.6 Finalizar llamada:finaliza la llamada.7P oner llamada en espera : mantiene la llamada en espera hasta que se pulse el botón “Reanudar llamada ”.O123456710UTILIZACIÓN DE SkypeRECEPCIÓN DE UNA LLAMADASi alguien llama mientras está viendo la TV, aparecerá un mensaje en la parte inferior derecha de la pantalla.1R esponder con vídeo : responde a la llamada con vídeo (detiene la TV).2 R esponder : responde a la llamada.3 R echazar : no responde a la llamada y continúa viendo la TV.ResponderLlamada de MichaelRechazar123Llamada de vozRechazarLlamada de Michael123O1L lamada de vídeo : responde a la llamada con vídeo (detiene la TV).2 L lamada de voz : Recibir la llamada con voz (se detiene la TV).3 R echazar : no responde a la llamada y continúa viendo la TV.11UTILIZACIÓN DE SkypeUTILIZACIÓN DE Skype (webOS Smart TV)INICIE SkypeMANDO A DISTANCIA NORMAL1Pulse2Inicie Skype .MANDO A DISTANCIA MÁGICO1 Pulse2Inicie Skype .Crear cuenta / Iniciar sesiónCrear una nueva cuentaInicie sesión con una cuenta de Microsoft ¿Necesita ayuda?Contraseña Nombre de usuario de Skype Iniciar sesión cuando inicie Skype Tras seleccionar el icono de Skype, escriba su nombre de usuario y contraseña de Skype. Seleccione "Iniciar sesión cuando inicie Skype" para iniciar la sesión automáticamente cuando seencienda la TV.12UTILIZACIÓN DE Skype MENÚ DE SkypeMenú principal CONTACTOS CONTACTOSEsta es la lista de contactos. Para obtener más información sobre cómo realizar una llamada, consulte las páginas 14 y 16.Menú principal CONTACTOS AGREGAR UN CONTACTOPulse el botón "AGREGAR UN CONTACTO"'en la pantalla "CONTACTOS".Contactos Buscar por nombre, nombre de usuario de Skype o dirección de correo electrónico.Menú principal AGREGAR UN CONTACTO Puede buscar usuarios de Skype mediante la barra de búsqueda. Desde los resultados de la búsqueda, puede agregar el contacto que desee.Contactos Llamar a un teléfono Menú principal Llamar a un teléfono Seleccione un país al que desearía llamar y escriba un número de teléfono. Ahora, seleccione "Llamar".13UTILIZACIÓN DE SkypeMENÚ DE Skype (CONTINUACIÓN)Menú principal HISTORIAL Todas las llamadas Mensajes de voz Solicitudes de contacto HISTORIALMuestra "T odas las llamadas", "Mensajes de voz" y"Solicitudes de contacto".Si se selecciona "T odas las llamadas", puedecomprobar las llamadas perdidas, las llamadas recibidas y las llamadas realizadas.Puede comprobar la lista de eventos recibidos seleccionando "Mensajes de voz" o "Solicitudes de contacto".Los números a la derecha de cada elemento indican el número de elementos no comprobados.Menú principal MI PERFIL Estado PerfilEstado de ánimoDisponible InvisibleNombre de usuario de Skype ********Nombre completo *************"I am fine."MI PERFILEl menú de información consta de "Estado","Estado de ánimo" y "Perfil".Menú principal CONFIGURACIÓN Desvío de llamadas Configuración de privacidad Configuración de vídeo Cambiar contraseña Cerrar sesión CONFIGURACIÓNEl menú de configuración incluye "Configuración de notificaciones", "Desvío de llamadas","Configuración de privacidad", "Configuración devídeo", "Cambiar contraseña" y "Cerrar sesión".14UTILIZACIÓN DE Skype REALIZAR UNA LLAMADA DE VÍDEO AL CONTACTOContactos Menú principal VER PERFILEn línea Nombre de usuario de Skype *********Nombre completo *************Fecha de nacimiento **/**/****Edad **Desde la lista de contactos, seleccione la persona a la que desea llamar.Pulse el botón "LLAMADA DE VÍDEO".24365711 A GREGAR PERSONAS : agregar para llamar a un miembro.2 M ODO DE PANTALLA : cambia la ventana de vídeo.3 C ÁMARA APAGADA: e l vídeo desaparece y la parte conectadatampoco puede verlo.4 M icrófono apagado: s ilencia el micrófono y la parte conectada no puede escuchar la voz.5 F INALIZAR LLAMADA : finaliza la llamada.6 A LEJAR/ACERCAR ZOOM DE LA CÁMARA : amplía o reduce el vídeo.7 A PUNTAR ZOOM: L a imagen ampliada se enviará a la otraparte mediante la función de zoomorientado. La imagen ampliada solo es unode los cuadrados de la cuadrícula de nuevepartes.O 243657115UTILIZACIÓN DE Skype REALIZAR UNA LLAMADA (SÓLO DE VOZ) A UN CONTACTOContactos Menú principal VER PERFIL En líneaNombre de usuario de Skype *********Nombre completo *************Fecha de nacimiento **/**/****Edad **Desde la lista de contactos, seleccione la personaa la que desea llamar.Pulse el botón "Llamada de voz".243651 1 A GREGAR PERSONAS: agregar para llamar a un miembro. 2 M ODO DE PANTALLA: cambia la ventana de vídeo. 3 P ANEL DE MARCADO: abre un teclado numérico. 4 C ÁMARA ENCENDIDA: comparte el vídeo con la parte conectada. 5 M icrófono apagado: s ilencia el audio. La parte conectada nopuede oír el audio. 6 F INALIZAR LLAMADA: finaliza la llamada.16UTILIZACIÓN DE Skype RECEPCIÓN DE UNA LLAMADA 21ATENDER Si alguien llama mientras está viendo la TV, aparecerá un mensaje en la parte inferior de la pantalla.1 RECHAZAR : n o responde a la llamada y continúa viendo la TV.2ATENDER : s e inicia la aplicación Skype y la pantalla cambia a "Llamada entrante...".321Esta es la pantalla que aparece al seleccionar "ATENDER".1 C ontestar con vídeo : r esponde a la llamada con vídeo.2 C ontestar con audio : r esponde a la llamada con voz.3 R echazar: n o responde a la llamada.17APÉNDICERESOLUCIÓN DE PROBLEMASAPÉNDICEESPECIFICACIONES DEL PRODUCTO■El contenido de este manual se puede modificar sin previo aviso debido a la actualización de las funciones del producto.■Las especificaciones que se muestran anteriormente pueden modificarse sin previo aviso para mejorar la calidad.■Este producto cumple las especificaciones de la cámara de codificación Skype (SECS) 2.1.Las videollamadas mediante una TV de LG no pueden realizarse utilizando los siguientes dispositivos:■ASUS Skype Video Phone T ouch SV1TS■ASUS Skype Videophone T ouch SV1TW■AIGURU_SV1 Skype Video Phone*La lista de dispositivos no compatibles puede ampliarse sin notificación previa.“Skype es una marca comercial de Skype o sus empresas asociadas. Aunque este producto se ha probado y cumple con nuestros estándares de certificación de calidad de audio y vídeo, no está respaldado por Skype, Skype Communications S.a.r.l. ni ninguna de sus empresas asociadas”.Copyright:© 2003-2014, Skype18。
AXIS Q6055-C 60 Hz 50 Hz 室外 PTZ 网络摄像机说明书
表数据AXIS Q6055-C PTZ Network Camera具有主动冷却功能和Zipstream的高速PTZAXIS Q6055-C可以在环境温度高以及具有太阳辐射的环境中提供高视频品质和高性能监控。
凭借其内置的主动散热系统，它可以在高达75°C(167°F)的温度下运行。
它符合严格的MIL-STD-810G 标准，确保了在沙尘暴等恶劣天气条件下的可靠工作。
在雾中，自动除雾功能可以使视频更加清晰。
AXIS Q6055-C提供HDTV1080p和可自动对焦的32倍光学变焦功能、日夜转换功能、冲击侦测和智能视频增强功能。
内置分析功能包括自动跟踪、主动门卫值守、围栏侦测、目标移除以及进出侦测。
>工作温度高达75°C(167°F)>室外一体，符合MIL-STD-810G>HDTV1080p和32倍光学变焦>光纤SFP槽、RJ45连接和针对报警输入/输出的输入/输出(I/O)>Axis Zipstream技术AXIS Q6055-C PTZ Network Camera 型号AXIS Q6055-C60HzAXIS Q6055-C50Hz摄像机图像传感器1/2.8''逐行扫描CMOS镜头 4.44–142.6毫米，F1.6–4.41水平视野：62.8°–2.23°垂直视野：36.8°–1.3°自动对焦、自动光圈日夜自动可拆卸式红外滤光片最低照度彩色：30IRE F1.6条件下为0.3lux黑/白：30IRE F1.6条件下为0.03lux彩色：50IRE F1.6条件下为0.5lux黑/白：50IRE F1.6条件下为0.04lux快门时间1/33000s至1/3s，频率为50Hz1/33000s至1/4s，频率为60Hz平移/倾斜/变焦水平转动：360°连续，0.05°-450°/s垂直转动：220°，0.05°-450°/s32倍光学变焦和12倍数字变焦，总变焦为384倍电子翻转、256个预设位置、轮巡录制、轮巡、控制队列、屏幕方向指示器、设置新的0°水平转动、可调变焦速度视频视频压缩H.264(MPEG-4Part10/AVC)Baseline、Main和HighProfileMotion JPEG分辨率HDTV1080p1920x1080至320x180HDTV720p1280x720至320x180帧速率在HDTV720p下高达50/60fps(50/60Hz)在HDTV1080p下高达25/30fps(50/60Hz)视频流提供多个可单独配置的H.264和Motion JPEG格式的视频流Axis Zipstream技术可控制的帧速和带宽VBR/MBR H.264图像设置手动快门时间、压缩、颜色、亮度、锐度、白平衡、曝光控制、曝光区域、低照度下的微调行为、旋转：0°、180°、文本和图像叠加、32个单独的3D隐私遮罩、PTZ图像冻结、自动除雾、背光补偿宽动态范围(WDR)：高达120dB，具体取决于场景和高光补偿网络安全密码保护、IP地址过滤、HTTPS a加密、IEEE802.1X a网络访问控制、摘要式身份验证、用户访问日志、集中式证书管理、强力延迟保护支持的协议IPv4、IPv6USGv6、HTTP、HTTPS a、SSL/TLS a、QoSLayer3DiffServ、FTP、SFTP、CIFS/SMB、SMTP、Bonjour、UPnP TM、SNMP v1/v2c/v3(MIB-II)、DNS、DynDNS、NTP、RTSP、RTP、SRTP、SFTP、TCP、UDP、IGMPv1/v2/v3、RTCP、ICMP、DHCP、ARP、SOCKS、SSH、NTCIP、LLDP系统集成应用程序编程接口用于进行软件集成的开放API，包括VAPIX®和AXIS Camera Application Platform；规格请参见一键云连接ONVIF®Profile S和ONVIF®Profile G，规格请参见事件触发侦测器：已访问实时流、视频移动侦测、冲击侦测目标移除、进出侦测、围栏侦测、目标统计硬件：风扇、网络、温度PTZ：自动跟踪、错误、移动、就绪、已达到预设存储：中断、录制系统：系统就绪时间：重复、使用时间表输入信号：手动触发器、虚拟输入、数字输入事件动作昼/夜模式、叠加字幕、录制视频至前端存储、报警前和报警后视频缓冲、发送SNMP陷阱PTZ：PTZ预设、开始/停止轮巡通过FTP、SFTP、HTTP、HTTPS网络共享和电子邮件上传文件通过电子邮件、HTTP、HTTPS和TCP提供通知外部输出激活数据流事件数据内置安装帮助像素计算器分析应用随附AXIS Motion Guard、AXIS Fence Guard、AXIS Loitering GuardAXIS Video Motion Detection、自动追踪、主动门守基本分析（将不与第三方分析进行比较）：目标移除、进出侦测、围栏侦测、目标统计高光补偿支持支持AXIS Camera Application Platform，能够安装第三方应用，请参见/acap常规外壳IP66、NEMA4X和IK10级金属外壳（铝质）、聚碳酸酯(PC)透明半球罩、遮阳板(PC/ASA)存储器512MB RAM，256MB闪存电源24V DC摄像机功耗：最小65W推荐电源：AXIS T8008PS24接口IP66级DC电源复式连接器、RJ4510BASE-T/100BASE-TX和输入/输出，包括7米（23英尺）的电缆存储支持SD/SDHC/SDXC卡支持SD卡加密支持录制到网络附加存储(NAS)有关SD卡和NAS的建议，请参见工作条件-20°C至75°C（-4°F至167°F）湿度10–100%RH（冷凝）存放条件-40°C至65°C（-40°F至149°F）认证EMCEN55032A类、EN61000-3-2、EN61000-3-3、EN61000-6-1、EN61000-6-2、EN55024、FCC第15部分B子部分A类、ICES-003A类、VCCI A类、RCM AS/NZS CISPR32A类、KCC KN32A类、KN35安全IEC/EN/UL60950-1IEC/EN/UL60950-22环境EN50121-4、IEC62236-4、IEC60068-2-1、IEC60068-2-2、IEC60068-2-6、IEC60068-2-14、IEC60068-2-27、NEMA2504X型IEC/EN60529IP66MIL-STD-810G500.5-低压、501.5-高温、502.5-低温、503.5-温度冲击、505.5-太阳辐射、506.5-雨、507.5-湿度、509.5-盐雾、510.5-沙尘b网络NIST SP500-267重量6千克（13磅）尺寸Ø302x330毫米（Ø117/8x13英寸）所含附件AXIS T8607Media Converter Switch、7米（23英尺）IP66级多芯电缆安装指南、Windows解码器单用户许可证可选附件AXIS T8008PS24、SFP模块、烟色球型机罩盖AXIS T91Mounting Accessories、AXIS T8415WirelessInstallation Tool、AXIS T90Illuminators、AXIS T8310Video Surveillance Control Board、多用户解码器许可证包视频管理软件AXIS Companion、AXIS Camera Station、Axis应用开发合作伙伴的视频管理软件可在/vms上获得语言英语、德语、法语、西班牙语、意大利语、俄语、简体中文、日语、韩语、葡萄牙语、繁体中文质保有关5年保修的信息，请参见/warrantya.本产品包括由OpenSSL Project开发的用于OpenSSL工具包的软件。
国家核安全局关于释放福建福清核电厂六号机组核岛基础浇注第一罐混凝土控制点的通知
国家核安全局关于释放福建福清核电厂六号机组核岛基础浇注第一罐混凝土控制点的通知
文章属性
•【制定机关】国家核安全局
•【公布日期】2015.12.21
•【文号】国核安发[2015]270号
•【施行日期】2015.12.21
•【效力等级】部门规范性文件
•【时效性】现行有效
•【主题分类】核与辐射安全管理
正文
关于释放福建福清核电厂六号机组核岛基础浇注第一罐混凝
土控制点的通知
国核安发[2015]270号福建福清核电有限公司：
你公司《关于申请释放福建福清核电厂六号机组核岛基础浇注第一罐混凝土控制点的请示》（福核发〔2015〕597号）收悉。
根据《民用核设施安全监督管理条例》及其实施细则和我国核电厂相关安全规定及导则，我局对福建福清核电厂六号机组建造准备活动进行了监督，并组织检查组于2015年12月15日至16日对核岛基础浇注第一罐混凝土（FCD）现场准备情况进行了核安全检查。
监督检查结果表明，福建福清核电厂六号机组核岛基础已具备浇注第一罐混凝土的基本条件。
我局同意你公司完成FCD全部先决条件，并经环境保护部华东核与辐射安全监督站确认后，可以实施福建福清核电厂六号机组核岛基础浇注第一罐混凝土活动。
你公司应严格按照设计和建造阶段质量保证大纲要求进行福清核电厂六号机组核岛基础混凝土浇注活动，确保核电厂建造质量。
国家核安全局
2015年12月21日。
锐视科技 4K Ultra HD 无线外墙摄像头说明书
• 4K (8MP) Ultra HD delivers four times the detail of 1080p 1 for the clearest visual evidence possible (resolution settings must be manually switched to 4K)•Programmable dual motion-activated LED warning lights warn away would-be intruders •Remote-triggered siren to discourage trespassing and alert others •Advanced dual motion detection technology increases accuracy•The latest H.265 compression technology reduces video file sizes by up to 50% to save valuable hard drive space•Color Night Vision™ delivers full color nighttime video for improved recognition of people or objects in low light conditions 2 •IR night vision range up to 130ft (40m) in ambient lighting and 90ft (27m) in total darkness 3 •Smart IR for improved recognition of close-up objects or people in the dark•True HDR gives you picture clarity and detail under high-contrast lighting conditions •Super wide angle 128° field of view (diagonal) •Built-in microphone and speaker for 2-way talk 4•Includes two mounts for multiple indoor and outdoor mounting options•Simple camera installation using a single CAT5e cable with Power over Ethernet (PoE) •Weatherproof IP66 rated 5 and cold climate capability (-22°F / -30°C)•Weatherproof Ethernet connector cover for a protective seal against the elementsFeatures:STOP CRIME BEFORE IT EVEN STARTSLorex Active Deterrence cameras offer a new level of security coverage for your home or business. Warn off would-be intruders with dual programmable LED lights, remote-triggered siren, and 2-way talk. The super wide angle viewing allows you to cover more area with a single camera.LNB8105X Series4K ACTIVE DETERRENCE NETWORKSECURITY CAMERA2-Way Talk128°Field of view4K (8MP)Ultra High DefinitionNight Vision130/90 FT40/27 MSpecificationsProduct InformationMount / Tabletop Stand, 1× Wall Mount, 1× 60ft (18m) CAT5e In-Wall Rated UL Ethernet Cable, 1 × Mounting Kit, Quick Start Guide1. Default resolution settings must be manually changed to 4K (8MP) in order to record or view 4K video. Compatible with select Lorex LNR Series NVRs. For the most up-to-date list of compatible recorders, visit /compatibility2. Full color nighttime video typically switches to black & white IR night vision below 1 lux to ensure optimal low-light image quality.3. Stated IR illumination range is based on ideal conditions in typical outdoor night time ambient lighting and in total darkness. Actual range and image clarity depends on installation location, viewing area, and light reflection / absorption level of object. In low light, the camera will switch to black and white.4. Audio recording is disabled by default. Audio recording without consent is illegal in certain jurisdictions. Lorex Technology does not assume liability for any use of its products that fails to conform with local laws.5. Not intended for submersion in water. Installation in a sheltered location recommended.DisclaimersImage Sensor 1/2.5" 8MP Video Format NTSC / PAL Effective Pixels H: 3840 V: 2160Resolution 8MP (3840×2160) @ 15fps 1Scan System Progressive Sync System Internal S/N Ratio 44dB (AGC Off)IrisFixedAES Shutter Speed 1/3(4)~1/100,000 seconds Min. Illumination 0.7 Lux without IR LED 0 Lux with IR LED Video Output IPAudioBuilt-in Microphone & Speaker 4 Lens / Lens Type 2.8mm F2.0 / Fixed Field of view (Diagonal)128°Termination RJ45 Ethernet / 12V DC Power Barrel (optional)IR LED Type 850nmNight Vision Range 130ft (40m) / 90ft (27m) 3Color Night Vision™Yes 2Power Requirement PoE (Power over Ethernet) / 12V DC Power ConsumptionMax. 600mA / 7.2W Operating Temp. Range -22°F ~ 122°F / -30° ~ 50°C Operating Humidity Range <95% RHEnvironmental Rating IP66 (Indoor / Outdoor) 5Dimensions ( W × D × H)with Ceiling Mount/ Table Top Stand 3.0" × 3.8" × 4.7" / 75mm × 98mm × 119mm Dimensions ( W × D × H)with Wall Mount 3.0" × 4.4" × 3.1" / 75mm × 113mm × 78mm Weight1.4lbs / 0.64kg© 2019 Lorex TechnologyAs our product is subject to continuous improvement, Lorex Technolog y & subsidiaries reserve the right to modify product design, specifications & priceswithout notice and without incurring any obligation. E&OE.Lorex Corporation999 Corporate Blvd. Suite 110Linthicum, MD, 21090, United States3-02202019 (19-0072-LOR)Setup DiagramCameraHD NVRRouterPoE SwitchDimensionsCamera with Wall MountCamera with Ceiling Mount / Table Top Stand。
进度计划编码程序
程序会签和修改记录目录1、目的2、适用范围3、依据文件4、责任5、程序6、附录1.目的为了规范P6 软件在福清核电工程中进行多项目进度管理的运用，充分发挥其在大型工程多项目管理中的作用，更好地为中国核工业第二四建设有限公司福清核电项目部（以下简称项目部）计划编制人员服务，特制订本规则。
2.适用范围本程序适用于中国核工业第二四建设有限公司福清核电项目与计划管理体系有关的工程文件、计划文件等。
3.依据文件《CNPE-FQ-1-SCB-109A进度控制体系编码手册》4.责任本手册由项目部工程运营部归口管理，各相关部门、各施工队参考执行，工程运营部负责监督检查。
5.程序单位代码：中国核工业第二四建设有限公司福清核电项目部——CNI24项目代码用工程所在地的汉语缩写首字母表示。
后续新增的工程一同参考执行；主要计划版本号用A、B、C……（部分专项计划版本号可用01、02、03……）；WBS代码在项目代码的基础上进行规范，WBS 结构手册另行行文发布；详细规则参见附录。
6.附录附录一：编码手册汇总表附录二：作业代码编码规则附录一：编码手册汇总表CNI24项目进度管理体系编码手册汇总表项目管理软件中有多个需要完整规划和定义的编码体系，为了使编码审核、使用方便，现将各类编码规则和结构汇总如下，供相关人员在编制、管理计划时使用。
1. 企业项目结构EPS⏹ 第0层：中国核工业第二四建设有限公司福清核电项目部（根结点）（CNI24）⏹ 第一层：项目代码⏹ 第二层：项目阶段⏹ 第三层：计划级别⏹ 第四层：岛＋类别⏹ 第五层：版次⏹ 以下：根据需要分类EPS 代码格式注：建造五级计划不添加岛（类别），其下细分至队厂，加各队厂部门英文缩写,如核岛1队—H01,---；常规岛1队—C01,---;BOP队—BOP；核电安装公司—HAZ。
说明：⏹ 项目主要阶段包括：前期（PP）、建造(CT)、专项计划SS。
（分机组1-6）⏹计划级别代码：一级到六级使用L1-L6代表;⏹ 岛：核岛使用NI，常规岛使用CI，BOP使用BP⏹ 施工类型：土建使用C⏹ 版本：A、B、C、D、E……（部分使用01、02、03、04……）（分PRE 和CFC版次）2.组织分解结构OBS本体系的OBS采用简化的OBS结构，只包括与工程有关的部门，也包括各个项目分包商。
平安城市-监控指挥中心设计方案
平安城市监控指挥中心设计方案目录概述 (2)应用背景 (2)总体目标 (3)设计原则 (4)设计依据 (5)两级监控指挥中心设计 (7)区县局指挥中心设计 (7)指挥中心布局 (7)系统架构设计 (9)综合控制系统 (10)图像显示系统 (17)音视频多媒体接入 (23)监控工位设计 (23)网络设备部署 (23)派出所分控中心设计 (24)系统架构设计 (24)解码控制系统 (24)图像显示系统 (25)监控工位设计 (25)网络设备部署 (25)应用平台设计 (26)概述应用背景随着我国“新常态”下政治经济层面宏观政策的不断调整，经济增速放缓，社会经济处于结构转型和产业升级的关键阶段，各类风险和不稳定因素不断积聚扩张，因利益格局深刻调整造成许多不可测和不可预见的不稳定因素。
同时，随着社会开放程度日趋提高，交通设施的日益便捷以及各类新兴传播技术手段的普遍应用，各类利益群体跨地串联、抱团造势、非法聚集、频繁上访，预防化解社会矛盾和群体性事件将面临更加严峻的考验。
未来我国城镇化水平仍将进一步提升，人流、物流、资金流和信息流必将进一步加快，大量外来人口和本地农村人口涌入城市、集镇，必然导致社会治安局势更趋复杂，治安的动态性和犯罪的流窜性将更加突出。
此外，近年来发生的一系列诸如北京金水桥、昆明火车站、厦门公交纵火等极端暴力恶性案事件，也预示着恐怖主义在我国正呈现从边疆向内地不断渗透、恐怖主义威胁的来源复杂化、恐怖袭击的手段方式趋向多样性等几个主要特征，恐怖活动短期之内难以根除，且有转向常态化的趋势，反恐压力剧增。
为积极应对社会治安发展形势，“深入推进立体化社会治安防控体系建设，全面提升动态化、信息化条件下社会治安治理能力。
”1党和国家出台了一系列政策法规，对社会治安防控体系和平安城市的建设提出了新的要求，具有极强的指导意义。
在这一系列文件当中，尤以中共中央办公厅、国务院办公厅印发的《关于加强社会治安防控体系建设的意见》和九部委发布的《关于加强公共安全视频监控建设联网应用工作的若干意见》最为具有代表性。
视频会议系统测试方案
视频会议系统测试方案目录一、内容概述 (2)1.1 背景与目的 (3)1.2 适用范围 (3)1.3 目标与要求 (4)二、测试概述 (5)2.1 测试目标 (6)2.2 测试范围 (7)2.3 测试策略 (7)2.4 测试环境搭建 (9)三、测试用例设计 (10)3.1 用户登录测试 (11)3.1.1 正常登录 (12)3.1.2 未注册用户登录 (12)3.1.3 错误密码登录 (13)3.2 视频通话测试 (14)3.2.1 一对一视频通话 (14)3.2.2 多人视频通话 (15)3.2.3 同时进行语音和视频通话 (16)3.3 会议功能测试 (17)3.3.1 创建会议 (18)3.3.2 加入会议 (19)3.3.3 会议控制 (20)3.3.4 会议录制与回放 (21)3.4 系统性能测试 (22)3.4.1 带宽测试 (23)3.4.2 延迟测试 (24)3.4.3 CPU与内存占用测试 (26)四、测试执行与记录 (27)4.1 测试准备 (28)4.2 测试执行步骤 (29)4.3 测试结果记录 (31)4.4 缺陷跟踪与管理 (32)五、测试报告与总结 (33)5.1 测试报告内容 (34)5.2 测试结果分析 (35)5.3 改进建议 (36)5.4 测试总结 (37)一、内容概述本文档旨在全面而详细地阐述视频会议系统的测试方案，以确保系统在各种应用场景下的稳定性、可靠性和高效性。
测试方案覆盖了从需求分析、测试环境搭建、测试用例设计到测试执行和缺陷跟踪的整个测试周期。
我们将对视频会议系统的功能需求、性能需求和非功能需求进行深入分析，明确系统的预期行为和性能指标。
我们将搭建一个与实际生产环境尽可能一致的测试环境，包括硬件设备、网络配置、软件版本等，以确保测试结果的准确性。
基于需求分析的结果，我们将设计一系列覆盖正常流程、边界条件和异常情况的测试用例，以验证系统的正确性和健壮性。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
目录1.项目背景 (3)2.项目建设总体要求 (3)3.需求一览表 (3)4.技术要求 (6)4.1工程实施工期 (6)4.2系统集成费用 (6)4.3售后服务要求 (6)5.要求 (8)5.1关于系统的整体性要求 (8)5.2关于硬件设备 (9)5.3设备工作环境要求 (9)5.4文件要求 (9)6.安装、调试和验收要求 (10)6.1安装工作要求 (10)6.2调试工作要求 (11)6.3验收工作要求 (12)6.3.1分项验收 (12)6.3.2系统验收 (13)7.文档要求 (13)1.项目背景中国核电工程有限公司福清项目部，因工程建设需要，需在施工现场室外环境配置一套视频会议设备。
由于原会议设备为室内设备，在室外环境下会议效果极差，影响施工现场与总部指挥中心之间视频会议的开展。
2.项目建设总体要求部署的视频会议系统必须满足室外环境下的会议效果，并保证运转稳定可靠。
在设备选型上，要求在同类设备中性能优良，能达到高标准、高质量、性能稳定的产品。
使用方便易于操作，在系统出现故障时，应能够在较短的时间内恢复系统运行。
3.需求一览表本次采购总体需求如下：1. 为保障系统可用，设备提供商或项目实施方应免费提供设备的上架、安装、连接、测试；2. 设备提供商或项目实施方应提供但不限于下面表格所列出的货物项目，包括设备间连接线缆等；3. ★为关键性能指标，不带星号为一般指标，供货关键性能须满足或优于需求参数，在投标文件中必须提供设备厂商授权文件并加盖生产厂商公章。
序号 产品 基本参数 数量 （一）设备1 视频会议系统 ★1、通信协议：符合国际电联ITU H.323和IETFSIP标准；2、系统架构：终端采用分体结构，嵌入式操作系统；3、接口：★支持至少7路视频输入接口和6路视频输出接口，其中包含2路HDCI,3路HDMI输1套入，3路HDMI和VGA输出。
★支持至少9路音频输入接口和3路音频输出接口，其中包含数字音频输入和输出接口；4、视频：★视频编解码算法应符合国际标准ITUH.261、H.263、H.263+、H.264、H.264High Profile、H.264 SVC协议；★视频图像格式应支持720p30帧/秒，并向下兼容主要分辨率★视频编码能力支持在512kbps带宽下实现720p30帧/秒图像效果，832Kbps带宽下实现720p60帧/秒图像效果；★符合ITU国际高清标准（1080p, 50/60fp）.5、音频：★支持ITU G.722.1C、G.719和AAC-LD 等宽带音频编码协议支持22KHZ以上宽频语音6、双流：支持H.239和BFCP双流标准。
支持双流内容分辨率达720P30帧/秒效果为满足会议室内多人需轮流发送双流的需求，支持PC通过无线IP的方式发送双流，并能对双流内容进行放大。
支持通过鼠标、手写笔、触摸屏方式对双流内容进行标注，在点对点或多点会议中支持双流内容交互式标注，并支持对标注后的内容进行保存。
7、镜头:★标配同一品牌PTZ云台高清镜头，镜头具备至少12倍光学变焦，支持自动对焦功能，摄像机参数可调；★支持信号线对镜头直接供电，不用外接电源线 镜头支持至少1080P60帧/秒以上的图像抓取能力支持镜头预置位功能，设置预置位时可保存位置图像，用户可根据图片预览预置位的实际位置，至少支持50个预置位8、麦克风: ★标配全向数字麦克风，麦克风上具备声音开关按钮，并且具备静音状态显示。
支持多个麦克风级联，扩展会场拾音范围。
全向麦有效录音半径须达到5米，具备回音抑制功能，可屏蔽手机信号干扰。
9、★网络适应性:支持视频和音频丢包恢复技术，支持在不降分辨率的前提下5%内丢包无马赛克现象支持智能网络适应技术，最高支持20%丢包范围内图像可接受10、易用性:全中文支持：为方便管理员和用户使用，要求所有管理、操作界面全部采用中文， 支持在用户操作界面上设置显示多个快捷呼叫号码，方便用户日常使用支持智能飞屏技术，可将会议呼叫从移动终端一键转移到会场终端11、扩展能力: ★扩展支持至少8点内置MCU能力,8方与会者均能正常显示。
扩展支持语音跟踪智能导播功能，使用双镜头，1个镜头照全景，1个镜头跟踪发言人特写，在多人发言讨论的情况无需人工操作，可在全景和发言人特写镜头间智能切换2 高清摄像头(含三角架) 技术特性：产品须为第三方国际高端品牌视频会议摄像头,指标要求:高灵敏度1/2.8英寸Exmor 传感器；全新Wide-D技术，可提供杰出的宽动态范围；高清视频格式全输出（1080P/60）；★≥20倍光学变焦，12倍数字变焦；基于IP控制高清视频会议摄像机；IP H.264 全高清1080/60p视频和AAC音频流媒体；超宽视角，63.7度广角设计；★同一画面中较亮与较暗部分，能清晰显示；★最低照度≤0.19Lx,强光（阳光下）、暗光（暗光）下成像清晰，与真实环境相比无明显色差；俯仰平移角度：平移: ±170° 俯仰:+90°/-20俯仰平移速度：平移 : 100°/ 秒1台Tilt: 90°/ 秒支持图像翻转，图像防抖功能。
256预置位存储；3G-SDI视频输出，10BASE-T /100BASE-TX RJ45网络接口。
3 无线领夹话筒（一拖二） 频带宽度：50MHz频率间隔：250KH载波频段：UHF 620~950MHz频道组数：双频道机箱材质：金属机箱机箱规格：EIA标准1U射频稳定度：±0.005%(-10~50℃)振荡模式：PLL相位锁定频率合成可切换频率数：300组接收方式：双调谐器自动选讯1套4 支架 37-70英寸落地电视支架 1套 4.技术要求4.1工程实施工期到货时间要求：合同签订后半个月内。
设备集成时间要求：指的是设备提供商或项目实施方在工程开始之日起到工程竣工验收合格所需的整体时间。
本项目要求实施工期为5个工作日内。
4.2系统集成费用设备提供商或项目实施方应提供设备连接所需的线缆，提供的总价应包含这些费用。
4.3售后服务要求根据设备提供商或项目实施方向买方所提供的硬件设备的种类及其应用范围，以及买方的需求，设备提供商或项目实施方应向买方提供全方位的、有效的、及时的维修服务和技术支持。
设备提供商或项目实施方对其提供的系统集成工作提供至少3年免费技术支持服务。
技术服务期从本项目系统验收完成之日开始计算。
在技术支持期限内，针对项下的硬件设备所带软件，除技术要求指标中有特殊要求外，硬件产品至少应提供三年原厂商免费现场维护与技术支持服务，包括免费派工程师到现场服务，免费更换或修理有故障的设备和部件。
设备提供商或项目实施方在技术支持期限内安装的任何零配件，必须是其原设备厂家生产的或是经其认可的。
所有的替代零配件必须是新的未使用和未经修复的,除非买方提供书面许可，不可使用其他（或非新的）配件。
在技术支持期限内一般性故障，设备提供商或项目实施方必须为买方提供电话技术支持,用于买方报告故障。
技术支持电话使用中文语言。
如电话支持无法解决,设备提供商或项目实施方应在接到通知后2小时内作出响应，并免费上门采取行动排除故障，24小时内修复。
如果合同设备在保修期技术服务期内出现重大故障，设备提供商或项目实施方应在接到买方通知后立即提供解决方案，并立即派遣工程技术人员用最快捷的交通工具前往现场，并在12小时内恢复合同设备的正常运行，当现场设备无法在规定时间内恢复时，设备提供商或项目实施方应在24小时内提供相应的同等设备到现场。
如果因设备提供商或项目实施方原因造成合同设备重大故障或设备提供商或项目实施方在接到通知后的两个工作日内未作出响应或未排除故障，设备提供商或项目实施方应对由此给买方带来的损失承担相应责任。
因设备提供商或项目实施方设计、安装原因而造成故障，则技术支持期限从故障修复之日重新开始起算。
除提供上述技术服务外，设备提供商或项目实施方有责任提供以下形式的免费技术服务：●电话咨询：提供咨询电话技术支持服务，解答买方用户在系统使用中遇到的问题，及时提出解决问题的建议和操作方法。
●现场响应：自收到买方用户的服务请求起2小时内，若以上两种服务形式之一不能解决问题，设备提供商或项目实施方应指派技术人员赶赴现场进行故障处理。
遇到重大技术问题，设备提供商或项目实施方应及时组织有关技术专家进行会诊，并采取相应措施以确保系统的正常运行。
除技术规格要求中特别规定外，其他所有硬件产品的保修服务均≥3年（质保期后设备提供商或项目实施方须继续提供产品的有偿优惠维护和技术支持服务），需包含但不限于以下服务：●设备提供商或项目实施方须对本项目所提供的所有软硬件产品提供3年7*24小时的原厂质保服务，且须满足各产品技术需求中对后续服务的细化要求；●设备提供商或项目实施方须提供与各产品服务需求相对应的原厂质保服务承诺书；●在质保期内，如果所购硬件相关的系统软件更新，设备提供商或项目实施方应及时通知买方（最终用户），并根据买方（最终用户）需要免费为用户办理，同时按照原厂商的软件升级服务细则进行服务。
●质保期内，设备提供商或项目实施方负责对其提供的设备进行维修（包括非人为因素造成的损坏部件更换），不收取额外费用。
●设备提供商或项目实施方须承诺质保期后的服务费用及备品备件的价格享受与购买时同等或更优惠的条件。
如果备件停止生产，设备提供商或项目实施方应在停产前十二个月通知最终用户，使其能够提前购买备件。
设备提供商或项目实施方保证以当时市场价格但不高于本合同折扣后价格的优惠价格向买方（最终用户）提供具有同样功能的替代产品。
5.要求5.1关于系统的整体性要求本项目是CNPE福清现场项目调试处调试大棚视频会议系统部署项目。
设备提供商或项目实施方应在对本技术指标要求中所列出的技术要求进行全面分析和理解的基础上，同时考虑买方（最终用户）现有IT环境，提供本项目集成过程中必须包括的但不限于软件、硬件设备、各种配件、组件、线缆和服务等（包括未在货物需求一览表中列明但项目集成所必须的相关设备、软件、服务和材料），并确保全部硬件产品品牌不存在任何兼容性问题。
报价应覆盖上述全部内容，如有遗漏，在项目实施过程中，设备提供商或项目实施方应免费提供相应的硬件设备、软件、服务和材料。
设备提供商或项目实施方应保证系统能够集成和实际运行，如果本技术指标中要求与此发生冲突，设备提供商或项目实施方应提出书面修改意见，并按照修改后的要求配置相关的设备、软件、配件或组件、材料等（需标识新增、修改和删除）。
设备提供商或项目实施方应充分理解买方（最终用户）的需求，提出软硬件配备方案和系统集成方案。
设备提供商或项目实施方如提供了本技术指标没有规定、而设备提供商或项目实施方认为必须的设备或软件，必须就其名称、规格、数量和价格等做出明确说明，并计入总价。