同济大学研究生《高等混凝土结构理论》复习要点及教学大纲

这是同济大学结构研一硕士上的《高等混凝土结构理论》期末考试的复习要点，希望对考博选考《混凝土结构基本理论》这门课的同学有所帮助。

1．Stress-strain curves of concrete under monotonic, repeated and cyclic uniaxial loadings. 单轴受力时混凝土在单调、重复、反复加载时的应力应变曲线。

2．Creep of concrete (linear and nonlinear) 混凝土的徐变（线性、非线性徐变）

3．Components of deformation of concrete 混凝土变形的多元组成

4．Process of failure of concrete under uniaxial compression 混凝土在单向受压时破坏的过程。

5．Strength indices of concrete and the relations among them 混凝土的强度指标及其之间关系

6．Features of stress-strain envelope curve of concrete under repeated compressive loading. 混凝土单向受压重复加载时的应力应变关系的包络线的特征。

7．The crack contact effect of concrete and its representation in stress-strain diagram. 混凝土的裂面效应及其在应力应变关系图上的表示。

8．The multi-level two-phase system of concrete. 混凝土的多层次二相体系。

9．The rheological model of concrete. 混凝土的流变学模型。

10．Influence of stress gradient on strength of concrete. 应力梯度对混凝土强度的影响。

11．Tensile test of concrete and result. 混凝土轴心受拉试验及结果。

12．Size effect of concrete. 混凝土的尺寸效应。

13．Non-objectivity of desending branch of stress-strain curve of concrete subject to tension (gauge length dependency). 混凝土受拉时应力应变曲线下降段应变观测的非客观性（标距依赖性）。

14．Failure modes of concrete under multiaxial loading. 混凝土在多轴受力时的破坏形式。

15．Strength theories of concrete and their forms of representation. 混凝土强度理论及其表述方式。

16．Properties of failure surface of concrete. 混凝土破坏曲面的特性。

17．Types of 3D stress-strain relations of concrete. 混凝土三维应力应变关系的各种类型。

18．Stress-strain relations of rebars under different types of loading. 在不同加载条件下钢筋的应力应变关系。

19．The bauschinger effect of rebars. 钢筋的包兴格效应。

20．The valley of shear failure of concrete beam (Kani’s valley). 混凝土梁的剪切破坏谷（卡尼谷）。

21．Truss model of shear resistance and its failure modes. 抗剪桁架模型及其破坏模式。

22．Shear failure zone. 剪切强度控制区。

23．Features of shear resistance of T-beams. T形梁的抗剪特点.

24．Shear resistance of beams with variable depth. 变高度梁的抗剪。

25．Beam action and arch action of shear resistance. 抗剪的梁作用和拱作用。

26．Calculation of stress in diagonal struts of truss model for shear. 抗剪桁架模型混凝土斜压杆的应力计算。

27．Solution of the statically indeterminate truss in the plastic truss theory. 塑性桁架理论中超静定桁架的求解。

28．Why should the angle of inclination of diagonal cracks duo to shear be limited? 为什么要限制剪切斜裂缝的倾角？

29．Compression fan and compression field. 压力扇和压力场。

30．B-region and D-region. B区和D区。

31．The strut-and-tie model and its components. 拉压杆模型及其组成部分。

32．How to determine which strut-and-tie model is better? 如何判别拉压杆模型的优劣？

33．Analysis of flexural sections under given conditions. 在给定条件下混凝土受弯截面的分析。

34．The contribution of tension flange to the flexural strength of the beam; shear lag concept. 梁的受拉翼缘对受弯承载力的贡献；剪力滞。

35．Ductility design of structures. 结构的延性设计。

36．The influence of confinement by stirrups on properties of concrete. 箍筋约束对混凝土性能的影响。

37．Factors influencing curvature ductility. 影响截面曲率延性的因素。