BPC-817S光耦原厂DCY品牌推荐
![BPC-817S光耦原厂DCY品牌推荐](https://img.360docs.net/img78/03m2eilwsfa1h165sq32-81.webp)
![BPC-817S光耦原厂DCY品牌推荐](https://img.360docs.net/img78/03m2eilwsfa1h165sq32-62.webp)
BPC-817S
D A T A S H
E E T
●DEVICE NUMBER :
●Features: ● Outline Dimensions
1. C urrent transfer ratio (CTR: MIN. 50% at I F
2. H igh input-output isolation voltage
(V ISO=5,000Vrms)
3. R esponse time (tr: TYP. 4μs at V CE=2V, I C
R L=100 ?)
4. U L approved (NO.E236324)
5. C SA approved (NO.218896)
6. V DE approved (NO.40007240)
7. T UV approved (NO.R50029014)
8.This product doesn't contain restriction
substance, comply ROHS standard
●Description
1. The BPC-817 series are optically coupled
and an NPN silicon phototransistor
2. The lead pitch is 2.54mm
● Applications:
1. C omputer terminals.
2. S ystem appliances, measuring instruments.
3. R
4. E lectric home appliances, such as fan heaters,
etc.
5. S
potentials and impedances.
●Absolute Maximum Ratings (Ta=25℃)
Parameter Symbol
Rating
Unit
Forward Current I F 50 mA INPUT
Reverse Voltage V R 6 V
Power Dissipation P 70 mW
Collector-Emitter Voltage V CEO 35
V
Emitter- Collector Voltage V ECO 6
OUTPUT
Collector Current I C 50 mA Collector Power Dissipation P C 150 mW Total Power Dissipation P tot 200 mW
*1 Isolation Voltage V iso 5,000 Vrms Rated impulse isolation voltage V IOTM 6,000 V Rated repetitive peak isolation voltage V IORM 630 V Operating Temperature T opr-30 to + 100
℃
Storage Temperature T stg-55 to + 125
*2 Soldering Temperature Tsol 260
*1. AC For minute, R.H. =40~60%
Isolation voltage shall be measured using the following method.
(1) Short between anode and cathode on the primary side and between collector and emitter on the secondary side.
*1 CTR= I C / I F × 100%
●RANK TABLE OF CURRENT TRANSFER RATIO(CTR)
RANK MARK Min. (%) Max. (%) L50100
A80160
B130260
C200400
D300600 L o r A o r B o r C or D50600
Notes:
1.
●CHARACTERISTICS CURVES
●Characteristics Curves
●Judgment Criteria Of Failure For The Reliability
Symbol Measuring conditions Judgment criteria for failure
V F (V) If=20mA Over Ux1.0
Ir(u A) Vr
Ux1.0 =4V Over =5V Shift>1.2
V CE
=5mA,
CTR(%) If
V CE(sat)I F=20mA, I C= 1mA Over Ux1.0
Lx1.0 =0 Over BV CEO I C=0.1mA, I F
Lx1.0 =0 Over
BV ECO I E=10μA, I F