火星悬浮音响l141说明书
Martin Audio FlexPoint 可移动电磁点源扬声器用户指南 V1.0说明书
User GuideFlexPointPortable coaxial point source loudspeakersV1.0ContentsRiggingAccessories List. 4 Accessories. 5 Integrated Pole Mount. 9 Touring Yoke Installation Portrait. 10 Installation for FP6 (FP6YPT) & FP8 (FP8YPT). 10 Touring Yoke Installation Landscape. 12 Installation for FP6 (FP6YLT) & FP8 (FP8YLT). 12 Touring Yoke Installation Portrait. 14 Installation for FP12(FP12YPT) & FP15(FP15YPT). 14 Touring Yoke Installation Landscape. 16 Installation for FP12(FP12YLT) & FP15(FP15YLT). 16 Touring & Install Yoke Installation. 18 Installation for FP4 (FP4Y). 18 Lower Mounting Position. 19 Upper Slot Mounting Position. 20 Yoke Installation Install Portrait. 21 Installation for FP6 (FP6YPI), FP8( FP8YPI), FP12 (FPYPI), FP15 (FP5YPI). 21 Lower Mounting Position Portrait. 22 Upper Mounting Position Portrait. 23 Yoke Installation Install Landscape. 24 Installation for FP6 (FP6YLI), FP8( FP8YLI), FP12 (FPYLI), FP15 (FP5YLI). 24 Lower Mounting Position Landscape. 25 Upper Mounting Position Landscape. 26 Pole Adaptor (ASF20045) Touring Yokes. 27 Installation for FP6, FP8, FP12, FP15. 27 Simple Rigging Bar (SBAR40) Portrait. 29 Installation for FP6, FP8, FP12, FP15. 29 Simple Rigging Bar (SBAR40) Landscape. 30 Installation for FP6, FP8, FP12, FP15. 30 Wall Mounting Brackets (WB) Portrait. 31 Installation for FP6, FP8, FP12, FP15. 31 Wall Mounting Brackets (WB) Landscape. 34 Installation for FP6, FP8, FP12, FP15. 34 WB Spacers (WB6/8 & WB10/12) Portrait/Landscape. 37 Installation for FP6, FP8, FP12. 37Driver Rotation FP6. 38 Driver Rotation FP8, FP12, FP15. 39Rigging Accessories List.PartASF20045 SBAR40ASF20071 WB6/8WB10/12 WB15FP4YFP6YLIFP6YPIFP6YLTFP6YPTFP8YLIFP8YPIFP8YLTFP8YPTFP12YLIFP12YPIFP12YLTFP12YPT FP15YLIFP15YPIFP15YLTFP15YPT DescriptionPole mount adoptor for FP4, FP6, FP8, FP12, FP15 Flying Bracket for FP6, FP8, FP12, FP15Wind-up telescoptic poleWall mount bracket for FP6, FP8Wall mount bracket for FP12Wall mount bracket for FP15Touring & install yoke for FP4Install yoke for FP6 (Landscape)Install yoke for FP6 (Portrait)Touring yoke for FP6 (Landscape)Touring yoke for FP6 (Portrait)Install yoke for FP8 (Landscape)Install yoke for FP8 (Portrait)Touring yoke for FP8 (Landscape)Touring yoke for FP8 (Portrait)Install yoke for FP12 (Landscape)Install yoke for FP12 (Portrait)Touring yoke for FP12 (Landscape)Touring yoke for FP12 (Portrait)Install yoke for FP15 (Landscape)Install yoke for FP15 (Portrait)Touring yoke for FP15 (Landscape)Touring yoke for FP15 (Portrait)Accessories.ASF20045SBAR40ASF20071WB6/8WB10/12WB15FP4Y FP6YLIFP6YPI FP6YLTFP6YPT FP8YLIFP8YPI FP8YLTFP8YPT FP12YLIFP12YPI FP12YLTFP12YPT FP15YLIFP15YPI FP15YLTFP15YPTIntegrated Pole Mount.The rear mount sets the angle at 0 °.The front mount sets the angle at 20 °.FP6, FP8, FP12 & FP15 have an integrated 35mm dual pole mount for deployment on SX Series subwoofers or speaker stands.FP4 has a 3/8” insert for a microphone stand.Align the insert on the FP4 with the Microphone stand.Mount the FP4 to the microphone stand.Touring Yoke Installation Portrait.Installation for FP6 (FP6YPT) & FP8 (FP8YPT).FP6 & FP8 have an integrated M10 mounts for rigging accesories. Quick release touring yokes can be fixed to the mounts without the use of any tools.Pull the floating arm out before aligning to the mounts on the speaker.Align the arms to the M10 mounts on the speaker.Secure the yoke to the speaker using the handwheels.Set the desired angle for the speaker.Tighten the hand wheels on both sides to secure.Touring Yoke Installation Landscape.Installation for FP6 (FP6YLT) & FP8 (FP8YLT).FP6 & FP8 have an integrated M10 mounts for rigging accesories. Quick release touring yokes can be fixed to the mounts without the use of any tools.Pull the floating arm out before aligning to the mounts on the speaker.Align the arms to the M10 mounts on the speaker.Secure the yoke to the speaker using the handwheels.Set the desired angle for the speaker.Tighten the hand wheels on both sides to secure.Touring Yoke Installation Portrait.Installation for FP12(FP12YPT) & FP15(FP15YPT).FP12 & FP15 have an integrated M10 mounts for rigging accesories. Quick release touring yokes can be fixed to the mounts without the use of any tools.Release the clamp levers on both sides of the yoke.Pull the floating arm out before aligning to the mounts on the speaker.Align the arms to the M10 mounts on the speaker.Secure the yoke to the speaker using the clamp levers onboth sides.Set the desired angle for the speaker.Tighten the clamp levers on both sides to secure.Touring Yoke Installation Landscape.Installation for FP12(FP12YLT) & FP15(FP15YLT).FP12 & FP15 have an integrated M10 mounts for rigging accesories. Quick release touring yokes can be fixed to the mounts without the use of any tools.Release the clamp levers on both sides of the yoke.Pull the floating arm out before aligning to the mounts on the speaker.Align the arms to the M10 mounts on the speaker.Secure the yoke to the speaker using the clamp levers onboth sides.Set the desired angle for the speaker.Tighten the clamp levers on both sides to secure.Touring & Install Yoke Installation.Installation for FP4 (FP4Y).The FP4 has integrated M6 mounts for the FP4Y yoke assembly. The quick release yoke can be secured to the mounts with the use of any tools.The FP4Y has a lower mounting hole and a slot above for close coupled installation.Lower mounting position allows for any vertical angle desired.Upper mounting slot reduces the gap between the yoke and the speaker for close coupled mounting and low ceilings. Close coupled has limited vertical angle adjustment.Remove the M6 fixings from the sides of the cabinet.Secure the yoke to the speaker using the clamp levers on both sides.Set the desired angle for the speaker.Tighten the thumb wheels on both sides to secure.Lower Mounting Position.Remove the M6 fixings from the sides of the cabinet.Secure the yoke to the speaker using the clamp levers on both sides.Set the desired angle for the speaker.Tighten the thumb wheels on both sides to secure.Upper Slot Mounting Position.Yoke Installation Install Portrait.Installation for FP6 (FP6YPI), FP8( FP8YPI), FP12 (FPYPI), FP15 (FP5YPI).Flexpoint install yokes can be fixed to the M10 mounting points, but tools are required. A 17mm socket or spanner for the yoke and 10mm socket or spanner to securely lock the yoke angle.There are two available mounting postions for the install yokes.Lower mounting position allows for any vertical angle desired.Upper mounting postion reduces the gap between the yoke and the speaker for close coupled mounting and low ceilings.Close coupled mounting has limited vertical angle adjustment.Set the desired angle for the speaker.Lock into place using a 17mm socket or spanner for the M10 mounting points (both sides) and a 10mm for the secondary fixing.Lower Mounting Position Portrait.Position the friction pads and fixings on the lower mounting holes and secure into place with a 17mm socket or spanner.Attach to the cabinet with a 17mm socket or spanner.Set the desired angle, which is limited to the yokes close proximity to the cabinet.Upper Mounting Position Portrait.Position the friction pads and fixings on the upper mounting holes andsecure into place with a 10mm socket or spanner.Lock into place using a 17mm socket or spanner for the M10 mounting points (both sides) and a 10mm for the secondary fixing.Yoke Installation Install Landscape.Installation for FP6 (FP6YLI), FP8( FP8YLI), FP12 (FPYLI), FP15 (FP5YLI).Flexpoint install yokes can be fixed to the M10 mounting points, but tools are required. A 17mm socket or spanner for the yoke and 10mm socket or spanner to securely lock the yoke angle.There are two available mounting postions for the install yokes.Lower mounting position allows for any vertical angle desired.Upper mounting postion reduces the gap between the yoke and the speaker for close coupled mounting and low ceilings.Close coupled mounting has limited vertical angle adjustment.Set the desired angle for the speaker.Lock into place using a 17mm socket or spanner for the M10 mounting points (both sides) and a 10mm for the Lower Mounting Position Landscape.Position the friction pads and fixings on the lower mounting holes and secure into place with a 17mm socket or spanner.Attach to the cabinet with a 17mm socket or spanner.Set the desired angle, which is limited to the yokes closeproximity to the cabinet.Upper Mounting Position Landscape.Position the friction pads and fixings on the upper mounting holes andsecure into place with a 10mm socket or spanner.Lock into place using a 17mm socket or spanner for theM10 mounting points (both sides) and a 10mm for thesecondary fixing.Attached the speaker to the yoke as per instrutions starting on page 12.Mount onto the pole and tighten the thumb screw on the pole mount adaptor to secure.Pole Adaptor (ASF20045) Touring Yokes.Installation for FP6, FP8, FP12, FP15.Secure the pole mount adaptor to the yoke using the included fixings.Tighten clamp levers to secure the cabinet in place.Release the clamp levers on both sides of the yoke.Rotate the cabinet to the dired angle.The SBAR40 can be mounted at the rear for negative angles.Mounted at the front for positive angles.Simple Rigging Bar (SBAR40) Portrait.Installation for FP6, FP8, FP12, FP15.Locate the SBAR40 on to the M10 mounting plate.Tighten hand wheel to secure.The SBAR40 can be mounted at the rear for negative angles.Mounted at the front for positive angles.Simple Rigging Bar (SBAR40) Landscape.Installation for FP6, FP8, FP12, FP15.Locate the SBAR40 on to the M10 mounting plate.Tighten hand wheel to secure.Remove the pivot pin from the WB assembly.Separate the two parts of the WB bracket.Wall Mounting Brackets (WB) Portrait.Installation for FP6, FP8, FP12, FP15.Remove the middle and lower fixings from the cabinet. Remove the R-Clip and washer from the WB bracket.Attach the wall part of the WB assembly to a suitable structure using rated fixings.Attach the speaker part of the WB assembly to the cabinet, using the fixings that were removed from the cabinet.Replace the washer and R-Clip to sucure the pivot pin in place. Set the desired downward tilt angle and hold in place with the grub screw.Offer the speaker up to the wall bracket and hook the horizontal bolt into the curved slot.Replace the pivot pin.Once the vertical angle is set tighten the top bolt with a 5mm hex tool.Set the hozontal angle, then secure using a 5mm hex tool.Remove the pivot pin from the WB assembly.Separate the two parts of the WB bracket.Wall Mounting Brackets (WB) Landscape.Installation for FP6, FP8, FP12, FP15.Remove the middle and lower fixings from the cabinet.Remove the R-Clip and washer from the WB bracket.Attach the wall part of the WB assembly to a suitable structure using rated fixings.Attach the speaker part of the WB assembly to the cabinet, using the fixings that were removed from the cabinet.Replace the washer and R-Clip to sucure the pivot pin in place. Set the desired downward tilt angle and hold in place with the grub screw.Offer the speaker up to the wall bracket and hook the horizontal bolt into the curved slot.Replace the pivot pin.Once the vertical angle is set tighten the top bolt with a 5mm hex tool.Set the hozontal angle, then secure using a 5mm hex tool.WB Spacers (WB6/8 & WB10/12) Portrait/Landscape.Installation for FP6, FP8, FP12.WB6/8 & WB10/12 are designed to be unobtrusive low profile wall brackets for neat and professional installation. When mounted the speaker sits very close to the wall and although maximum tilt angle is available, there is a limit to how much horizontal panning can be achieved.Included with the WB brackets are two spacers, these can be inserted between the bracket and the wall. The spacers allow formore horizontal adjustment with or without vertical adjustment applied.Max angle without spacers up to 44 degrees.Max angle with spacers up to 52 degrees.Attach the wall part of the WB without spacers.Attach the wall part of the WB with spacers.Lift the driver free of the recess in the baffle using two of the driver fixings and rotate through 90 degrees.Driver Rotation FP6.Remove the grille by pressing the quick release catches.Loosen the captive driver fixings until they are completely free of the cabinet inserts.Tighten all thumb wheels to secure the driver.Replace the grille by lining up the grille slots and pushinginto place on both sides.Lift the driver free of the recess in the baffle using two of the driver fixings and rotate through 90 degrees.Driver Rotation FP8, FP12, FP15.Remove the grille by pressing the quick release catches.Loosen the captive driver fixings until they are completely free of the cabinet inserts.Tighten all thumb wheels to secure the driver.Replace the grille by lining up the grille slots and pushinginto place on both sides.Pull and rotate the badge through 90 degrees for landscape deployment.。
Yamaha VXC12-4 双路激光锥头 PA 音箱说明书
I SERIESPoint Source 600IP6-1122/64MEDIUM POWER 12-INCH TWO-WAY 60° x 40° INSTALLATION LOUDSPEAKERCommunity strives to improve its products on a continual basis. Specifications are therefore subject to change without notice.*Rated continuous maximum input voltage at passive loudspeaker input may be higher than for directly connected transducers due to losses in the passive crossover. Voltages applied to the transducer terminals through the passive crossover shall always be the same or lower than the rated continuous voltagefor each device.FEATURES• Long excursion ferrite LF driver with FEA-optimized motor and symmetric movement suspension • 3-inch voice coil, 1.4” exit HF driver; hybrid titanium/polyimide diaphragm on low compression phase plug • Lightweight and compact with deep LF extension• Large rotatable waveguide with individually voiced crossover, single amp / biamp selectable • Innovative low profile modular bracket systems create elegant arrays with simplified installationAPPLICATIONSMAIN PA (Small to Medium Size Venues)Houses of Worship · Auditoriums · Restaurants Meeting Rooms · Theaters · Corporate A/V Systems DISTRIBUTED OR FILL (Larger Size Venues)Arenas · Stadiums · Night Clubs · TheatersThemed Entertainment · Larger Houses of WorshipDESCRIPTIONI SERIES Point Source 600 loudspeakers provide excellent acoustic performance, modular flexibility and elegant aesthetics for modern performance venues. Designed to support the goals of systems integrators and consultants both acoustically and mechanically, I SERIES includes a wide variety of arrayable, rotatable coverage patterns and a comprehensive selection of modular bracket systems that accelerate system design and system commissioning.FEA-optimized ferrite motors, mechanically mirrored suspension and advanced cooling system combine to provide linear performance with minimal power compression. The custom long-excursion LF driver delivers deep bass response and a detailed midrange at maximum SPL levels. The HF driver delivers excellent sound quality from a hybrid diaphragm of deep drawn titanium and resonance-absorbing polyimide, coupled to a patented low compression, low resonance phase plug for very low distortion performance with abundant headroom.The rotatable 13-inch (330mm) HF waveguide provides well-defined coverage and a smooth off-axis response that enhances arrayability. Individually voiced crossovers produce proper beamwidth matching transitions and identical sonic signatures, permitting horn patterns to be mixed throughout an installation. Additionally, user selectable single-amp or biamp operating modes expand application flexibility.I SERIESPoint Source 600IP6-1122/64MEDIUM POWER 12-INCH TWO-WAY60° x 40° INSTALLATION LOUDSPEAKERI SERIES Point Source 600HORIZONTAL POLAR DATA (30dB Scale, 6dB per major division)IP6-1122/64MEDIUM POWER 12-INCH TWO-WAY 60° x 40° INSTALLATION LOUDSPEAKERVERTICAL POLAR DATA (30dB Scale, 6dB per major division)-6— 100 Hz — 125 Hz — 160 Hz — 200 Hz-90° right 45°135°90° left-45°-135°0°front180°back — 250 Hz — 315 Hz — 400 Hz — 500 Hz— 630 Hz — 800 Hz — 1000 Hz — 1250 Hz-90° right 45°135°90° left-45°-135°0°front 180°back-90° right 45°135°90° left-45°-135°0°front180°back — 10000 Hz — 12500 Hz — 16000 Hz--90° right45°135°90° left-45°-135°0°front180°back — 4000 Hz — 5000 Hz — 6300 Hz — 8000 Hz-90° right45°135°90° left-45°-135°0°front 180°back — 1600 Hz — 2000 Hz — 2500 Hz — 3150 Hz-90° right45°135°90° left-45°-135°0°front 180°back -6— 100 Hz — 125 Hz — 160 Hz — 200 Hz-90° down 45°135°90° up-45°-135°0°front180°back — 250 Hz — 315 Hz — 400 Hz — 500 Hz— 630 Hz — 800 Hz — 1000 Hz — 1250 Hz-90° down 45°135°90° up-45°-135°0°front 180°back-90° down 45°135°90° up-45°-135°0°front180°back — 10000 Hz — 12500 Hz — 16000 Hz-90° down45°135°90° up-45°-135°0°front180°back — 4000 Hz — 5000 Hz — 6300 Hz — 8000 Hz-90° down45°135°90° up-45°-135°0°front 180°back — 1600 Hz — 2000 Hz — 2500 Hz — 3150 Hz-90° down45°135°90° up-45°-135°0°front 180°backI SERIES Point Source 600IP6-1122/64MEDIUM POWER 12-INCH TWO-WAY60° x 40° INSTALLATION LOUDSPEAKERCommunity Professional Loudspeakers333 East Fifth Street, Chester, PA 19013-4511 USA Phone (610) 876-3400 • Fax (610) •*********************CAUTION: Installation of loudspeaker s should only be performed by trained and qualified personnel. It is strongly r ecommended that a licensed and cer tified pr ofessional structural engineer approve the mounting design.IP6-1122/64 [07JUN2016]NOTESTwo-way single ampTwo-way biamp I SERIESPoint Source 600Two-way input panelIP6-1122/64MEDIUM POWER 12-INCH TWO-WAY 60° x 40° INSTALLATION LOUDSPEAKER1. PERFORMANCE SPECIFICATIONS All measurements are taken indoor using a time-windowed and processed signal to eliminate room effects, approximating ananechoic environment, a distance of 6.0 m. All acoustic specifications are rounded to the nearest whole number. An external DSP with settings provided by Community Professional Loudspeakers is required to achieve the specified performance; further performance gains can be realized using Community’s dSPEC226 loudspeaker processor with FIR power response optimization.2. OPERATING RANGE The frequency range in which the on-axis processed response remains within 10dB of the average SPL.3. CONTINUOUS POWER HANDLING Maximum continuous input voltage (and the equivalent power rating, in watts, at the stated nominal impedance) that the system can withstand, without damage, for a period of 2 hours using an EIA-426-B defined spectrum; with recommended signal processing and protection filters. 4. NOMINAL SENSITIVITY Averaged SPL over the operating range with an input voltage that would produce 1 Watt at the nominal impedance and the averaged SPL over the operating range with a fixed input voltage of 2.83V, respectively; swept sine wave axial measurements with no external processing applied in whole space, except where indicated.5. NOMINAL MAXIMUM SPL Calculated based on nominal / peak power handling, respectively, and nominal sensitivity; exclusive of power compression.6. EQUALIZED SENSITIVITY The respective SPL levels produced when an EIA-426-B signal is applied to the equalized loudspeaker system at a level which produces a total power of 1 Watt , in sum, to the loudspeaker subsections and also at a level which produces a total voltage, in sum, of 2.83V to the loudspeaker subsections, respectively; each referenced to a distance of 1 meter.7. EQUALIZED MAXIMUM SPL The SPL produced when an EIA-426-B signal is applied to the equalized loudspeaker system, at a level which drives at least one subsection to its rated continuous input voltage limit, referenced to a distance of 1 meter. The peak SPL represents the 2:1 (6dB) crest factor of the EIA-426-B test signal.8. AXIAL PROCESSED RESPONSE The on-axis variation in acoustic output level with frequency of the complete loudspeaker system with recommended signal processing applied. 1/6 octave Gaussian smoothing applied.9. AXIAL SENSITIVITY The on-axis variation in acoustic output level with frequency for a 1 Watt swept sine wave, referenced to 1 meter with no signal processing. 1/6 octave Gaussian smoothing applied.10. HORIZONTAL / VERTICAL OFF-AXIS RESPONSES The loudspeaker’s magnitude response at various angles off-axis, with recommended signal processing applied in the operating mode which utilizes the largest number of individually amplified pass bands. 1/6 octave Gaussian smoothing applied.11. DIRECTIVITY INDEX The ratio of the on-axis SPLsquared to the mean squared SPL at the same distance for all points within the measurement sphere for each given frequency; expressed in dB. 1/6 octave Gaussian smoothing applied.12. BEAMWIDTH The angle between the -6dB points in the polar response of the loudspeaker when driven in the operating mode which utilizes the largest number of individually amplified pass bands. 1/6 octave Gaussian smoothing applied.Data presented on this spec sheet represents a selection of the basic performance specifications for the model. These specifications are intended to allow the user to perform a fair, straightforward evaluation and comparison with other loudspeaker spec sheets. For a detailed analysis of this loudspeaker’s performance, please download the GLL file and/or the CLF file from our website: .。
天网沉雨，白日暖色，耐拉扬B高音箱说明手册说明书
11. 2. 3. 4. 5. 6. 7. 8. 9. 10. Read the instruction first before using this product.Pay attention to all warnings.Obey all operating instructions.Do not expose this product to rain or moisture.Do not block any ventilation openings. Install according to instructions .Do not install this product near any heat source, such as , heater, burner, or any other equipment with heat radiation .Only use spare parts by manufacturer.Pay attention to the safety symbol on the of the cover.manual Please keep this manual for future reference Clean this equipment with a dry cloth.manufacturer's a supplied the outside SAFETY INSTRUCTIONSPLEASE READ THIS MANUAL FIRSTThank you for a buying product. Read this manual first as it will help you operate the system properly. Please keep this manual for future reference.WARNING:This product must be installed by professionals. When using hanging brackets or rigging other than those supplied withthe product, please ensure they comply with the local safety codes.The exclamation point within an equilateral triangle is intended to alert you to the presence of important operating and servicing instructions.ATTENTION: Don't refit the system or spare parts without being authorized as this will .void the warranty WARNING: Don't (such as candles) the equipment.place naked flames close to2T212BCONTENTProduct information is subject to change without prior notification. Please visit for latest updates.CONTENT453333444556667Features Description Applications Frequency Response and Impedance Curve CONNECTIONNL4 ConnectionINSTALLATIONMounting Accessories Installation Reference INTRODUCTIONSystem Connection Reference Technical Sheet2D DimensionTECHNICAL SPECIFICATION2×NL4Dual 12" Passive Subwoofer3T212BT212BDual 12" Passive SubwooferDual " 12 high-power woofer.Computer aided design to optimize frequency and phase response.Frequency response range: 48Hz-2.2kHz (-3dB).Sensitivity 96dB, MAX.SPL 133dB/139dB(PEAK).Rated power 1000W.FeaturesApplicationsINTODUCTIONDescriptionβ3 large size venues demanding high SPL and reliability. It helps building perfect playback system cooperating with T Series full range products. Band-pass design helps T212B perform high SPL with small volume. The driver uses high powered 100mm diameter voice coil which is wrapped by copper wires outside. Voice coil Skelton is made of TIL material that improves the tolerance of voice coil power suffering. Ferrite magnetic circuit provides very high BL and line magnetic circuit. Power compression reduces by good heat radiating performance and harmonic distortion also does so by iron choking ring limiting current. Rated power can reach 1000w and short max power is up to 4000w (GB/T9396-1996 Standard). T212B is good for carnival and permanent installation. Laminated board from China painted with polyurethane guarantees super weather resistance. Two stands, 8*50mm rubber feet and caster installation points are attach to the loudspeaker which provides convenient installation, stacking and removal. T212B is a compact subwoofer. It is used in middle to ....Small Auditorium Multifunctional Hall Disco HallSmall Performance Karaoke RoomDual 12" Passive Subwoofer4CHA BRIDGE INCHBSIGNAL GND SIGNAL +SIGNAL -BRIDGE PARALLEL STEREOON OFF50HZ 25HZ ONOFF CHB OUTPUTCHA OUTPUTPOWER CABLEFUSE-B+-A+-+5HZCAUTIONB R D G EOUTPUT ASSIGNMENT: BRIDGE MONO OUTPUT:CHA :PIN1+ : SIGNAL GNDCHA:PIN 1+ :PIN 1 - :PIN 2+ :PIN 2 - : CHA SIGNALCHA GND CHB SIGNAL CHB GNDCHB:PIN 1+ :PIN 1 - :PIN 2+ :PIN 2 - :CHB SIGNALCHB GND PIN2+ : !Serial no:Special design for big power ！RISK OF ELECTRIC SHOCKDO NOT OPENMODELF FILTERGROUNDCLIPLIMITERINPUTPIN1: PIN2: PIN3:121231+ 1- INPUT1+1-+-LOW+-LOWT212BT212B T212BINPUT/THRUWARRANTY : does not cover permanent damages of parts inside of the speaker caused by overload running for a long time.Dual 12" Subwoofer1+ 1- : INPUTSENSITIVITY(1W/1m)IMPEDANCE96dB 4ΩPOWER(RMS)FREQUENCY(-3dB)48Hz-2.2kHz800W NET WEIGHT 39kgTerminal PlateCONNECTION1. Connect2. DisconnectSystem Connection ReferenceAttention: The impedance of connected speaker must match the impedance of amplifier output.Attention: Make sure the polarity of speaker and amplifier correctly.NL4 ConnectionTwo NL4 connectors are available for amplifier connections. Paralelled connector is very convenient for another speaker connection.Dual 12" Passive Subwoofer100 *34mm 4 pcs Screws: M8 *30 Hexagon 16 pcsφ8 (Black) 16 pcs8 (Black) 16 pcs6S e n s i t i v i t y (d B )20708090100110120602063Frequency (Hz )I m p e d a n c e (O h m s )501002005002k5k10k20k1k3310T212BSpeaker Testing Method1. Frequency responseUse Pink noise to test the speaker in the anechoic room, adjust the level to make the speaker work at its rated impedance and the power output is 1W, then test the frequency response 1m away from the speaker.2. SensitivityUse full range Pink noise which was modified by EQ curve to test the speaker in the anechoic room, enlarge the signal to make the speaker work at its rated impedance and the power output is 1W, then test the sensitivity 1m away from the speaker.3. MAX.SPLUse full range Pink noise which was modified by EQ curve to test the speaker in the anechoic room, enlarge the signal to make the speaker work at its instant power output level, then test the SPL 1m away from the speaker.4. Rated PowerUse the pink noise according to IEC#268-5 to test the speaker, enlarge the signal for continuous 100hours, the rated Power is the power when the speaker will not incur hot damage or mechanics damage.SpecificationFrequency response curve & Impedance curveTECHNICAL SPECIFICATION48Hz-2.2kHz 96dB1000W 2000W (MUSIC)4000W (PEAK)(RMS)4 OhmsNL4×2(one input, one output)133dB/139dB(PEAK)40Hz-3kHz2×12"WooferPassive low-frequency speaker4Frequency response curve Impedance curve2×Iron handlePolyurethane-based painting.Steel grille is coated by powder to provide strong ultra-Weatherability.PlywoodFixed supporting baseWoofer:123Sensitivity(1W@1m):Power:N.W.(PC):System: Frequency response(-3dB):Frequency response(-10dB):Max.SPL(1m):Rated impedance:Cabinet: Handle:Surface: Connector:G.W.(PC):Cabinet dimension: (W ×D ×H)Package dimension: (W ×D ×H)Mounting accessories:460×520×720mm(18.1×20.5×28.4in)630×580×850mm(24.8×22.8×33.5in)39.0kg(85.8 lb)42.0kg(92.4 lb)Dual 12" Passive Subwoofer7520m m (20.5i n )460mm (18.1in)720m m (28.4i n )T212BTop viewFront viewSide view Back viewBottom view2D DimensionTECHNICAL SPECIFICATIONDual 12" Passive SubwooferNotes:。
Christie Vive Audio LA4S 扬声器用户手册说明书
Christie Vive Audio LA4SSpeakerU s e r M a n u a l020-101274-02NOTICESCOPYRIGHT AND TRADEMARKS© 2017 Christie Digital Systems USA Inc. All rights reserved.All brand names and product names are trademarks, registered trademarks or trade names of their respective holders.GENERALEvery effort has been made to ensure accuracy, however in some cases changes in the products or availability could occur which may not be reflected in this document. Christie reserves the right to make changes to specifications at any time without notice. Performance specifications are typical, but may vary depending on conditions beyond Christie's control such as maintenance of the product in proper working conditions. Performance specifications are based on information available at the time of printing. Christie makes no warranty of any kind with regard to this material, including, but not limited to, implied warranties of fitness for a particular purpose. Christie will not be liable for errors contained herein or for incidental or consequential damages in connection with the performance or use of this material. Canadian manufacturing facility is ISO 9001 and 14001 certified.WARRANTYProducts are warranted under Christie’s standard limited warranty, the complete details of which are available by contacting your Christie dealer or Christie. In addition to the other limitations that may be specified in Christie’s standard limited warranty and, to the extent relevant or applicable to your product, the warranty does not cover:a.Problems or damage occurring during shipment, in either direction.b.Projector lamps (See Christie’s separate lamp program policy).c.Problems or damage caused by use of a projector lamp beyond the recommended lamp life, or use of a lamp other than a Christielamp supplied by Christie or an authorized distributor of Christie lamps.d.Problems or damage caused by combination of a product with non-Christie equipment, such as distribution systems, cameras,DVD players, etc., or use of a product with any non-Christie interface device.e.Problems or damage caused by the use of any lamp, replacement part or component purchased or obtained from anunauthorized distributor of Christie lamps, replacement parts or components including, without limitation, any distributor offering Christie lamps, replacement parts or components through the internet (confirmation of authorized distributors may be obtained from Christie).f.Problems or damage caused by misuse, improper power source, accident, fire, flood, lightening, earthquake or other naturaldisaster.g.Problems or damage caused by improper installation/alignment, or by equipment modification, if by other than Christie servicepersonnel or a Christie authorized repair service provider.h.Problems or damage caused by use of a product on a motion platform or other movable device where such product has not beendesigned, modified or approved by Christie for such use.i.Problems or damage caused by use of a projector in the presence of an oil-based fog machine or laser-based lighting that isunrelated to the projector.j.For LCD projectors, the warranty period specified in the warranty applies only where the LCD projector is in “normal use” which means the LCD projector is not used more than 8 hours a day, 5 days a week.k.Except where the product is designed for outdoor use, problems or damage caused by use of the product outdoors unless such product is protected from precipitation or other adverse weather or environmental conditions and the ambient temperature is within the recommended ambient temperature set forth in the specifications for such product.l.Image retention on LCD flat panels.m.Defects caused by normal wear and tear or otherwise due to normal aging of a product.The warranty does not apply to any product where the serial number has been removed or obliterated. The warranty also does not apply to any product sold by a reseller to an end user outside of the country where the reseller is located unless (i) Christie has an office in the country where the end user is located or (ii) the required international warranty fee has been paid.The warranty does not obligate Christie to provide any on site warranty service at the product site location.PREVENTATIVE MAINTENANCEPreventative maintenance is an important part of the continued and proper operation of your product. Please see the Maintenance section for specific maintenance items as they relate to your product. Failure to perform maintenance as required, and in accordance with the maintenance schedule specified by Christie, will void the warranty.EnvironmentalThe product is designed and manufactured with high-quality materials and components that can be recycled and reused. means that electrical and electronic equipment, at their end-of-life, should be disposed of separately from regular waste. Please dispose of the product appropriately and according to local regulations. In the European Union, there are separate collection systems for used electrical and electronic products. Please help us to conserve the environment we live in!Table of ContentsSafety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Technical support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6What’s in the box? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Connect the speaker wire . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7Fly the LA4S . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8Wall mount the LA4S . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 The speaker does not function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10The speaker sound is degraded . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10There is speaker noise or hiss . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13Physical . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14Safety Information•Read this information thoroughly before installing or operating a speaker.•Read these instructions.•Keep these instructions.•Do not install near any heat sources such as radiators, heat registers, stoves, or other devices (including amplifiers) that produce heat.•Do not use this apparatus near water.•Do not install the speaker near water where the electrical components can be exposed to moisture. Do not place objects containing liquids, such as vases, on the product.•Clean only with a dry cloth.•Do not overpower or underpower speaker systems.•Use only in accordance with manufacturer’s specifications and installation guidelines.•Exposure to extremely high noise levels may cause permanent hearing loss. Individuals vary considerably in their susceptibility to noise-induced hearing loss, but nearly everyone will lose some hearing if exposed to sufficiently intense noise for a sufficient time. These are thepermissible noise level exposures specified by the United States Occupational Safety and Health Administration (OSHA):Duration (Consecutive)Sound Pressure Level (dbA), SlowResponses8 hrs906 hrs924 hrs953 hrs972 hrs1001.5 hrs1021 hr10530 min110Safety Information•According to the OSHA, any exposure in excess of the above permissible limits could result insome hearing loss. Earplugs or protectors to the ear canals or over the ears must be worn when operating this amplification system to prevent permanent hearing loss, if exposure is in excess of the described limits.•Two people are required to safely lift and install the speaker .•Speakers and speakers mounted to brackets must be affixed to a suitable structure following all local safety standards and regulations.•Always install all legally required additional redundant safety straps or cables.•Install the minimum number of rigging wires (refer to Installation for more details) that arerequired to suspend the speaker . Observe load ratings and all applicable local safety codes.•Only use attachments or accessories specified by Christie.•To reduce the risk of system damage, turn off the power amplifier and then disconnect thespeaker wire before performing a repair or maintenance.•All servicing must be completed by qualified service personnel. Servicing is required when the apparatus has been damaged in any way. For example, liquid has been spilled or objects have fallen onto the apparatus, the apparatus has been exposed to rain or moisture, does notoperate normally, or has been dropped.•Changes or modifications to the product not expressly approved by the party responsible forcompliance could void the user’s authority to operate the equipment.Technical supportTechnical support for Christie products is available at:•NorthandSouthAmerica:+**********************************************************,MiddleEast,andAfrica:+44(0)********************************************•AsiaPacific:+*********************************************•Coolux:+******************************************************•ChristieManagedServices:+***************************************≤15 min 115Duration (Consecutive)Sound Pressure Level (dbA), SlowResponsesIntroductionThis user manual provides surround speaker installation, troubleshooting, and specification information.OverviewThe LA3S-3ohm line array surround speaker is designed for auditoriums with approximately 250 to 350 seats. It may also be paired with S115 or S215 subwoofers and bi-amped to create a surround system with bass management.The LA4S line array surround speaker is designed for auditoriums with approximately 350 to 500 seats. It may also be paired with S115 or S215 subwoofers and bi-amped to create a surround system with bass management.It may also be used for a range of other applications, where vertical coverage and maximum throw distance are appropriate.The speaker contains an internal passive crossover, allowing it to operate with a single channel amplifier. Multiple hardware attachment points on the speaker allow for multiple installation options.What’s in the box?This table lists the components that are shipped with the LA4SQuantity Description Part number1Christie LA4S line array surround speakerorChristie LA4S line array surround speaker with grill 145-142108-XX or145-143109-XXInstallationComplete the following procedures to install the speaker .Connect the speaker wire1.Install the speaker according to the mounting instructions provided in this manual.2.Connect the speaker wire to the positive (A) and negative (B) terminals on the back of thespeaker.Use a #8 spade lug (part number: 145-159106-XX) if you are creating crimped spade lugterminations.Warning! Failure to comply with the following could result in death or serious injury.• Before installation, inspect all components for cracks, deformations, corrosion, andmissing or damaged parts that could reduce their installation strength.• A minimum of two people are required to safely lift and install the speaker .• Speakers must be affixed to a suitable structure following all local safety standards andregulations.• Only use attachments or accessories specified by the manufacturer.Notice. Failure to comply with the following may result in property damage.• Allow speakers exposed to extremely low temperatures to warm for a minimum of onehour before playing them at typical application levels. Failure to comply may result inequipment or property damage.• Speaker wire affects sound quality. Make sure the speaker wire quality and gauge areappropriate for your application.Notice. Failure to comply with the following may result in property damage.• The amplifier must be turned off and unplugged before you start this procedure.3.Connect the negative and positive speaker wires from the speaker to the correspondingterminals on the amplifier.4.Turn on the amplifier and verify that the speaker is receiving power.Fly the LA4SThe LA4S is flown, according to installer best practices, using three rigging wires and any legally required redundant safety cables.APositive (+) connection BNegative (-) connectionWall mount the LA4S1.Remove the four pre-installed M8 button head screws on the back of the speaker.2.Attach one of the following brackets to the back of the speaker using the four M8 button headscrews3.Mount the speaker to the wall using the manufacturer documentation provided with thebracket..DescriptionPart number Wall mount bracket (MM-024)111-681207-XX Wall mount bracket (MM-060)111-682208-XX ALA4S speaker BWall mount bracketTroubleshootingCaution! Failure to comply with the following could result in minor or moderate injury ordamage.• Do not service the speaker. All servicing must be completed by qualified servicepersonnel.The speaker does not functionThe speaker is connected to the amplifier, but is not producing any sound.Resolution•Verify that the speaker is receiving power from the amplifier.•Verify that the circuit breaker for the main circuit to the amplifier is closed.•Reset the circuit breaker. If the AC mains breaker continues to open, check the voltage and amperage of the circuit.•Verify that the negative and positive speaker wires from the speaker are correctly connected to the terminals on the amplifier.The speaker sound is degradedThe speaker is powered on and sound is being produced, but it is distorted.Resolution•Visually inspect the speaker for deterioration or holes.•Reduce the output level of the source.•Verify that the negative and positive speaker wires from the speaker are securely connected to the terminals on the amplifier.•Verify that there are no missing screws. Replace all screws that you removed during installation.Troubleshooting •Have an authorized dealer complete an audio test (for example, pink noise, frequency sweeps, and content and program material).There is speaker noise or hissThe speaker is producing static noise or hiss when powered.Resolution•Mute channels, one at a time, to isolate the problem.•Verify that the cables are in good working condition.•Reroute audio cables away from AC power and lighting cables.•Verify correct gain structuring of B Chain and input and output levels of source devices and amplifiers.•Check the polarity.SpecificationsAudioaMeasured at distances of 4 m and 8 m, in free field and on ground plane. Sensitivity is calculated based on themeasured SPL response averaged in the 200 Hz-3 kHz range and scaled back to 1 m.b AES refers to AES2-2012 standard. IEC refers to IEC 60268-5 standard. Maximum continuous SPL is calculatedbased on sensitivity and AES power handling. IEC short-term power is tested using IEC pink noise with a 9 dB crest factor . The crest factor was specifically increased to reflect real life parameters of digital cinema soundtracks. Maximum peak SPL is calculated using peak voltage during the IEC short-term power test.cAveraged in 500 Hz -16 kHz range at -6 dB.SpecificationDescriptionSystem type Coaxial parabolic ribbon driver line array, two-way, passive, single ported enclosure.Driver components Four 6 in. ribbon drivers with Kapton diaphragm and neodymium magnets and four 6.5 in. paper/Kevlar composite mid-bass drivers.CrossoverLinear phase, passive, symmetric at 1.5 kHz, 24 dB/octave Frequency response a60 Hz - 20 kHz @ -6 dBMaximum sound pressure level (SPL)b128.5 dB (AES) continuous, 140.5 dB, peakSystem coverage c 120° horizontal dispersion, 60° vertical dispersion Sensitivity a , 1 W/1 m100 dBRecommended amplifier power 715 W - 1165 W (FTC) at 3 Ohms / Christie CDA3, Christie CDA5, or Christie CDA7.5 (depending on application)Rated impedance3 OhmsConnectionsSpecification DescriptionInputs Screw terminal barrier stripPowerSpecification DescriptionPower handling a700 W (AES) continuous, 1400 W (IEC) short-termPhysicalSpecification DescriptionEnclosure Vented box alignment18mm marine plywoodHeavily damped and bracedDimensions (H x W x D)59.5 cm x 26.8 cm x 41.1 cm(23.4 in.) x (10.6 in.) x (16.2 in.)Weight (net)23 kg (51 lb)PartsSpecification Part Number6.5 in. 8 ohm woofer speaker003-121022-XX6 in. ribbon driver003-121021-XXAccessoriesSpecification Part Number Wall mount bracket (MM-024)111-681207-XX Wall mount bracket (MM-060)111-682208-XX Ceiling mount (MM-3RDX-18)111-683209-XX 1x fly cables and hardware111-686202-XX SpeakON Connector (for145-158105-XX amplifier output to speaker)145-159106-XX #8 Spade Lug (for speaker inputfrom amplifier)United Kingdomph: +44 (0) 118 977 8000United Arab Emirates ph: +971 4 3206688Spainph: +34 91 633 9990Singaporeph: +65 6877-8737Republic of South Africa ph: +27 (0)11 510 0094Korea (Seoul)ph: +82 2 702 1601Japan (Tokyo)ph: 81 3 3599 7481Indiaph: +91 (080) 6708 9999Germanyph: +49 2161 664540Franceph: +33 (0) 1 41 21 44 04Eastern Europe and Russian Federation ph: +36 (0) 1 47 48 100China (Shanghai)ph: +86 21 6278 7708China (Beijing)ph: +86 10 6561 0240Brazilph: +55 (11) 2548 4753Australiaph: +61 (0) 7 3624 4888Worldwide offi cesItalyph: +39 (0) 2 9902 1161Consultant offi cesCanada – Kitchener ph: 519-744-8005USA – Cypress ph: 714-236-8610Corporate offi ces。
Zeppelin音箱说明书
内容 章节 页欢迎 3iPod/iPhone的兼容性 4正确处理 5Zeppelin之旅 6开启遥控器 7设定 8连接iPod/iPhone 9控制音量 10检视iPod/iPhone上的曲目 11输出视频 12互联网上的串流档内容 13连接另一音源 14播放另一音源 15遥控器概述 16指示灯讯号概述 17接听iPhone上的来电 18调节声音 19清洁Zeppelin 20Zeppelin软件升级 21环保信息 22故障维修 23欢迎有别于其它的单件iPod 基座音源，Zeppelin 具有一个完整的三路立体声扬声器系统。
左声道和右声道各有独立的中音和高音单元，而两者的低音由同一个中央低音单元来控制。
再加上高效率的冷运转切换放大器，确保充满房间的美妙声音有极高的音质。
独特且通用的承托架稳固地支撑各种相容iPods/ iPhones，而无需另接转接器或调整，让用户在使用时更加随心所欲，控制自如，犹如在掌上。
视频 iPods / iPhones 受益于影像输出插座，用户可将影像传输到电视机上。
其它音乐源，如MP3播放器，便携式CD播放机和笔记型电脑，可以通过Zeppelin背部的AUX插座播放，该插座可支援模拟和数码连接。
Zeppelin有不同的硬件版本，可参考序列号标签识别（位置见第6页），不同硬件版本其操作也有些不同。
本手册适用于所有版本的Zeppelin，但软件必须升级到2.1版本。
它可取代任何随产品提供的印刷手册及较早前的在线版本。
感谢你选购Zeppelin并欢迎使用B&W Bowers & Wilkins产品。
iPod ® 和 iPhone ™都是极佳的随身音乐音源。
但当你在家中或办公室里，希望与朋友和家人共享音乐时，使用耳机就显得不甚方便了。
市面上有许多产品都可用来接驳你的 iPod 而无需使用耳机来欣赏你喜欢的音乐，但通常只有两个选择，一是附带大量线材的 hi-fi系统，二是一个单机方案，可是它无法让演奏者尽情展现他们的才华。
Philips Fidelio SoundHub 2.1 家庭电影院系统说明书
Philips Fidelio SoundHub2.1 Home theater withCrystal Clear Sound3D Blu-rayTitanium tweetersHTS9241Breathtaking clarity of all sound detailsObsessed with SoundDiscover Crystal Clear Sound with the new SoundHub home cinema system HTS9241.The titanium tweeters deliver astonishing clarity of every sound detail. Start enjoying yourfavorite movies and music as they were meant to be heard.Discover Crystal Clear Sound•Crystal Clear Sound for superbly clear and detailed sound•Titanium tweeters for undistorted sound of superb clarity•Premium Class D Amplifiers to preserve every sound detail•Virtual Surround Sound for a realistic movie experienceDesigned to enhance your cinema at home•Unique speakers with exposed tweeter for undisturbed sound•Lifestyle design in high quality brushed aluminum and glassSimply enjoy all your entertainment•Full HD 3D Blu-ray for a truly immersive 3D movie experience•Built-in dock for convenient playback from your iPod/iPhone•Built-in WiFi to enjoy your connected media wirelessly•Smart TV to enjoy online services & access multimedia on TVHighlightsTitanium tweetersThe co-developed tweeters, crafted intitanium, are very rigid and light to guarantee undistorted sound. Their incredible resistance to distortion and resonance through the whole audible frequency range guarantees superb clarity of all sound details.Premium Class D AmplifiersThe Philips proprietary Premium Class-D Amplifiers are designed to preserve theoriginal sound source for greater audio signal accuracy, thus allowing acoustic details in music and movies to be delivered exactly as the artist or director intended.Full HD 3D Blu-rayBe enthralled by 3D movies in your own living room on a Full HD 3D TV. Active 3D uses the latest generation of fast switching displays for real life depth and realism in full 1080x1920 HD resolution. By watching these images through special glasses with right and left lenses that are timed to open and close insynchrony with alternating images, the full HD 3D viewing experience is created in your home cinema. Premium 3D movie releases on Blu-ray offer a wide, high quality selection of content. Blu-ray also delivers uncompressed surround sound for an unbelievably real audio experience.Built-in dock for iPod/iPhoneA built-in dock for iPod/iPhone lets you play movies, music and photos from your iPod/iPhone. What's more, you can charge and control the iPod/iPhone and browse through its contents on your TV screen - all with the home theater's remote. Doing away with cumbersome cables and connections, the integrated dock brings portable entertainment into your home - with absolute ease.Smart TVPhilips home theater systems with Smart TV offer you an array of enhanced features,including Net TV, DLNA and MyRemote. Net TV brings a wide range of online information and entertainment to your TV. Simply select Net TV in the Home Menu and to start browsing for services like, video-on-demand stores* for the latest releases in HD, and Catch-up TV. With DLNA, you can access photos, music and movies stored on your PC from the comfort of your couch. Can't find theremote control? Simply use your smart phone or tablet PC to control your home theater viathe Philips MyRemote app.Matches Philips DesignLine Edge TV*Matches Philips DesignLine Edge TVThe perfect match for this home theater is the Philips DesignLine Edge TV. The combined set features a beautiful lifestyle design to fit your living room. Pixel Precise HD and LED TV pictures together with Ambilight bring an immersive TVexperience to your living room. Both TV and home theater can be operated with only one remote control and thecombined set ensures the best picture and sound performance with Philips Easylinkvia HDMI. In addition they are bothdesigned with same materials and finishingfor a perfect visual match!Philips Green LogoPhilips Green Products can reduce costs,energy consumption and CO2 emissions. How? They offer a significantenvironmental improvement in one ormore of the Philips Green Focal Areas – Energy efficiency, Packaging, Hazardous substances, Weight, Recycling anddisposal and Lifetime reliability.Issue date 2019-02-12 Version: 11.2.912 NC: 8670 000 71829 EAN: 87 12581 58166 4© 2019 Koninklijke Philips N.V.All Rights reserved.Specifications are subject to change without notice. Trademarks are the property of Koninklijke Philips N.V. or their respective owners.SpecificationsSound•Equalizer settings: Gaming, Movie, Music, News, Original•Sound Enhancement: Dialog Enhancement, DoubleBass, FullSound, Night Mode, Treble, Mid and Bass Control•Sound System: Dolby Digital 5.1, Dolby Digital Plus, Dolby True HD, DTS Digital Surround, DTS-HD High Resolution Audio•Satellite speaker output power: 135 W x2•Subwoofer output power: 230 W•Total Power RMS @ 30% THD: 500 W Loudspeakers•Loudspeaker types: 2 x Satellite speakers •Drivers per Satellite speaker: 1 x 1" Titanium tweeter, 2 x 3" full range woofers•Satellite speaker freq range: 150 - 20k Hz •Satellite speaker impedance: 5 ohm •Subwoofer type: Active•Subwoofer driver: 1 x 6.5" woofer •Subwoofer freq range: 20 - 150 Hz •Subwoofer impedance: 3 ohmConnectivity•Smart TV: DLNA, MyRemote, Net TV•Front / Side connections: Music iLINK, USB •Integrated Connections: Dock for iPod/iPhone, Wi-Fi•Rear Connections: AUX IN 1, AUX IN 2, Composite video (CVBS) output, Digital coaxial in, Digital optical in, Ethernet, FM Antenna Socket, HDMI 1.4 output (ARC), Mini Easy-Fit Speaker Jacks, SD/SDHC Card slot, Subwoofer out Convenience•EasyLink (HDMI-CEC): 21:9 format subtitle support, Audio Return Channel, Automatic audio input mapping, Dynamic Lipsync, One touch play, One touch standby, Remote Control-Passthrough •HDMI Features: 3D, Audio Return Channel (ARC), Content Type, Deep colorTuner/Reception/Transmission •RDS: Station Name•Tuner Bands: FM•Number of Preset Channels: 40Optical Playback Media•Playable Discs: AVCHD, BD, BD R / BD RE, CD, CDDA, CD-R/CD-RW, DVD, DVD +R/+RW, DVD -R/-RW, SVCD, VCD File Format•Audio: aac, mka, mp3, wav, wma•Picture: GIF, JPEG, JPG•Video: asf, avi, divx, mkv, mp4, mpeg, mpg, wmvAudio Playback•Compression format: AAC, MP3, WAV, WMA•MP3 bit rates: 32 - 320kbpsVideo Playback•Compression formats:AVCHD, DivX Plus HD,MPEG1, MPEG2, MPEG4, WMV HD, WMV SDStill Picture Playback•Compression format: GIF, JPEG, JPEG HD, JPEGProgressive, PNG•Picture Enhancement: Rotate, Slideshow withmusic playback, ZoomPicture/Display•Picture enhancement: HD (720p, 1080i, 1080p/24fps), Progressive scan, Video upscalingPower•Power consumption: 135 W•Power supply: 220-240V, 50Hz•Standby power consumption: < 0.5 WSustainability•Packaging: 80% recycled corrugated board,Electronic User Manual, No polyfoam, Soya basedinkDimensions•Main Unit (W x H x D): 307 x 66 x 304 mm•Main Unit Weight: 3.87 kg•Satellite Speaker (W x H x D): 131 x 334 x 99 mm•Satellite Speaker Weight: 1.2 kg•Satellite Speaker Cable length: 3 m•Subwoofer (W x H x D): 196 x 397 x 342 mm•Subwoofer Weight: 5.3 kg•Subwoofer cable length: 3 m•Packaging (W x H x D): 570 x 413 x 400 mm•Weight incl. Packaging: 16.6 kgAccessories•Included accessories: 2 x AAA Batteries, FMantenna, Power cord, Quick start guide, RemoteControl, Safety & Legal Leaflet, Trademarks Sheet,World Wide Warranty leafletMatching Philips Televisions*•DesignLine Edge: 32PDL7906, 42PDL7906*The home theater can also be matched with all other Philips TVs.*To check whether Video on Demand is available in your country,please visit /blu-ray.。
IND141说明书_R02
xxxxx.xx(0*) 重量下限设置-Lower
xxxxx.xx(0*)
近零比较-Near Zero 近零比较-Source 无效-Disabled 毛重*-Gross 近零比较范围-Near Zero
净重-net
xxxxx.xx(0.05*)
时间参数-Time 禁止比较时间-Inhibt Time(T1)
0*-99 目标值-Target
目标值和过量/欠量比较-Source 无效-Disabled 毛重*-Gross 净重-net 过量/欠量比较模式-Comparison Mode
当完成输出信号为 ON 时比较 *-Regularly 比较-Judge Input 上限/下限 -Upper/Lower 上限/下限比较-Source 无效-Disabled 毛重*-Gross 净重-net 上限/下限比较模式-Mode 当完成输出信号为 ON 时比较 *-Regularly 比较-Judge Input 重量上限设置-Upper
开始喂料流程
无效*-Disabled
允许-Enabled
起点重量值确认-SP1 Confirm
在称重开始时将判别重量值是否达到 SP1 的设定值，如重量值超过 SP1
的设定值，仪表将报警
无效*-Disabled
允许-Enabled
周期清零次数-AZ Count
当流程启动时，仪表将周期性自动清零使重量值为零
控制模式-Control Mode 顺序控制模式*-Sequence 简单比较模式 - Comparison 进料/卸料模式-Filling Mode 进料模式*-Feeding 卸料模式-Discharging 喂料输出方式-Output Type
Complete 信号输出条件-Complete 0*：判别时间后，在 Complete 延时时间内输出为 ON 1：判别时间后，当重量值处于稳定状态，在 Complete 延时时间内输出 为 ON 2：判别时间后或当 SP3 信号输出为 ON 后，当重量值处于稳定状态， 在 Complete 延时时间内输出为 ON
AXIS C1410网络小型扬声器说明书
DatasheetAXIS C1410Network Mini SpeakerSpeaker with wide-area coverage for voice messagesAXIS C1410Network Mini Speaker is a discrete and affordable speaker that fits into smaller spaces and provides wide-area audio coverage.It allows users to remotely warn off intruders before they commit a crime,to deliver instructions during an emergency or to make general announcements.Built-in memory supports pre-recorded messages,or personnel can respond to notifications with live speak.Digital signal processing(DSP)ensures clear sound.Open standards support easy integration with network video,access control,analytics,and VoIP.AXIS C1410is a standalone unit that can be placed almost anywhere,which supports a flexible,scalable and cost-effective approach to system design.>All-in-one speaker system>Connects to standard network>Simple installation with PoE>Remote health testing>PIR sensor for motion detectionAXIS C1410Network Mini Speaker Audio hardwareEnclosure One way enclosure with2.5inches broadband dynamic conespeakerMax soundpressure level90dBFrequencyresponse100Hz-20kHzCoverage pattern145°coaxialAudioinput/outputBuilt-in microphone(can be disabled)Built-inmicrophonespecification50Hz-12kHzAmplifierdescriptionBuilt-in7W Class D amplifierDigital signalprocessingBuilt-in and pre-configuredAudio managementAXIS Audio Manager Edge Built in:–Content management for music and live/pre-recorded announcements.–Scheduling to decide when and where to play specific content.–Content prioritization to ensure urgent messages interrupt the schedule.–Zone management allowing you to divide up to200speakers into20zones.–Health monitoring for remote discovery of system errors.–User management to control who has access to what features. See separate datasheet for more details.AXIS Audio Manager Pro For larger and more advanced systems.Sold separately.See separate datasheet for specifications.Audio softwareAudio streaming One-way/two-way with optional half-duplex echo cancellation.Mono.Audio encoding AAC LC8/16/32/48kHz,G.711PCM8kHz,G.726ADPCM8kHz, Axisµ-law16kHz,WAV,MP3in mono/stereo from64kbps to320kbps.Constant and variable bit rate.Sampling rate from8kHz up to48kHz.System on chip(SoC)Model i.MX6ULLMemory256MB RAM,512MB FlashNetworkSecurity Password protection,IP address filtering,HTTPS a encryption,IEEE802.1X a network access control,Digest authentication,Useraccess log,Centralized Certificate ManagementNetwork protocols IPv4/v6b,HTTP,HTTPS a,SSL/TLS a,QoS Layer3DiffServ,FTP,SFTP, CIFS/SMB,SMTP,Bonjour,UPnP TM,SNMP v1/v2c/v3(MIB-II), DNS,DynDNS,NTP,RTSP,RTP,TCP,UDP,IGMPv1/v2/v3,RTCP, ICMP,DHCP,ARP,SOCKS,SSH,NTCIP,SIP(Cisco,Avaya,Asterisk)System integrationApplication Programming Interface Open API for software integration,including VAPIX®,One-click cloud connection,AXIS Camera Application Platform(ACAP).VoIP Support for Session Initiation Protocol(SIP)for integration with Voice over IP(VoIP)systems.Peer to peer or integrated withSIP/PBX.Tested with:SIP client such as Cisco,Bria and Grandstream andPBX suppliers such as Cisco and Asterisk.Supported SIP features:secondary SIP server,IPv6,SRTP,SIPS,SIP TLS,DTMF(RFC2976and RFC2833),NAT(ICE,STUN,TURN)Supported codecs:PCMU,PCMA,opus,L16/16000,L16/8000,speex/8000,speex/16000,G.726-32Intelligent audio Auto Speaker Test(verification via built-in microphone)Event triggers Virtual inputs,AXIS Camera Application Platform(ACAP)Call:DTMF,State changesEvent actions Play audio clip,send SNMP trap,send Auto Speaker Test,status LED,File upload via HTTP,network share and email,Notification via email,HTTP,HTTPS and TCPBuilt-ininstallation aidsTest tone verification and identificationGeneralCasing Plastic casing,IP40ratedColors:WhiteRepaintable.For repainting instructions and impact on warranty,contact your Axis partner.Power Power over Ethernet(PoE)IEEE802.3af/802.3at Type1Class3(max12.95W) Connectors RJ4510BASE-T/100BASE-TX PoEReliability Designed for24/7operation.LED indicators Status LED,front-facing LEDPIR sensor Passive infrared(PIR)motion sensor.Max range:6m(19.7ft)Operatingconditions–20°C to50°C(4°F to122°F)Humidity10–85%RH(condensing)Storageconditions-40°C to65°C(-40°F to149°F)Humidity5–95%RH(non-condensing)Approvals EMCEN55032Class B,EN55035,EN61000-3-2,EN61000-3-3,EN61000-6-1,EN61000-6-2,FCC Part15Subpart B Class B,ICES-3(B)/NMB-3(B),RCM AS/NZS CISPR32Class B,VCCI Class BSafetyIEC/EN/UL62368–1DimensionsØ182X52mm(7.2x2.1in)Weight600g(1.3lb)IncludedaccessoriesInstallation Guide,AVHS authentication key,AXIS CameraStation license keyOptionalaccessoriesAXIS T91A33Lighting Track Mount,AXIS T91A23Tile Grid Ceiling Mount,AXIS TC1601Universal MountFor more accessories,see Mounting option When you mount the device on a soft tile ceiling,use a platebehind the tile for reinforcement.VideomanagementsoftwareAXIS Companion,AXIS Camera Station,video managementsoftware from Axis’Application Development Partners availableon /techsup/softwareLanguages English,German,French,Spanish,ItalianWarranty5-year warranty,see /warrantya.This product includes software developed by the OpenSSL Project for use in theOpenSSL Toolkit.(),and cryptographic software written by EricYoung(*****************).b.Audio synchronization with IPv4only.©2020-2023Axis Communications AB.AXIS COMMUNICATIONS,AXIS,ARTPEC and VAPIX are registered trademarks ofAxis AB in various jurisdictions.All other trademarks are the property of their respective owners.We reserve the right tointroduce modifications without notice.T10138424/EN/M16.2/2309。