ABS-台湾奇美-PA-757-SGS报告

Signature Not Verified
For Question Please Contact with SGS https://www.360docs.net/doc/8c15868985.html,
Test Report
No. : KA/2016/C1575
Date : 2016/01/25
Page: 1 of 5
CHI-MEI CORPORATION 59-1, SAN CHIA, JEN TE, TAINAN CITY 71702, TAIWAN
The following sample(s) was/were submitted and identified by/on behalf of the client as:
Sample Description Style/Item No. Sample Receiving Date Testing Period Sample Submitted By
: : : : :
ACRYLONITRILE-BUTADIENE-STYRENE COPOLYMER POLYLAC PA-757 2016/01/20 2016/01/20 TO 2016/01/25 CHI-MEI CORPORATION
?
============================================================================================ Test Requested : As specified by client, with reference to RoHS Directive 2011/65/EU Annex II to determine Cadmium, Lead, Mercury, Cr(VI), PBBs, PBDEs contents in the submitted sample. : With reference to IEC 62321: 2008. : Please refer to next page(s). : Based on the performed tests on submitted samples, the test results of Cadmium, Lead, Mercury, Cr(VI), PBBs, PBDEs comply with the limits as set by RoHS Directive 2011/65/EU Annex II; recasting 2002/95/EC.
Test Method Test Result(s) Conclusion
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the Company. This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at https://www.360docs.net/doc/8c15868985.html,/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at https://www.360docs.net/doc/8c15868985.html,/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. No. 61, Kai-Fa Road, Nanzih Export Processing Zone , Kaohsiung, Taiwan / 高雄市楠梓加工出口區開發路61號 SGS Taiwan Ltd. 台灣檢驗科技股份有限公司 t + 886 (07)301 2121 f + 886 (07)3010867 https://www.360docs.net/doc/8c15868985.html,
Member of the SGS Group

Test Report
No. : KA/2016/C1575
Date : 2016/01/25
Page: 2 of 5
CHI-MEI CORPORATION 59-1, SAN CHIA, JEN TE, TAINAN CITY 71702, TAIWAN
Test Result(s) PART NAME No.1 Test Item(s) Cadmium (Cd) Lead (Pb) Mercury (Hg) Hexavalent Chromium Cr(VI) Sum of PBBs Monobromobiphenyl Dibromobiphenyl Tribromobiphenyl Tetrabromobiphenyl Pentabromobiphenyl Hexabromobiphenyl Heptabromobiphenyl Octabromobiphenyl Nonabromobiphenyl Decabromobiphenyl Sum of PBDEs Monobromodiphenyl ether Dibromodiphenyl ether Tribromodiphenyl ether Tetrabromodiphenyl ether Pentabromodiphenyl ether Hexabromodiphenyl ether Heptabromodiphenyl ether Octabromodiphenyl ether Nonabromodiphenyl ether Decabromodiphenyl ether ： NATURE ACRYLONITRILE-BUTADIENE-STYRENE COPOLYMER Unit mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg Method With reference to IEC 62321: 2008 and performed by ICP-AES. With reference to IEC 62321: 2008 and performed by ICP-AES. With reference to IEC 62321: 2008 and performed by ICP-AES. With reference to IEC 62321: 2008 and performed by UV-VIS. MDL 2 2 2 2 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 Result No.1 n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. Limit 100 1000 1000 1000 1000 1000 -
With reference to IEC 62321: 2008 and performed by GC/MS.
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the Company. This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at https://www.360docs.net/doc/8c15868985.html,/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at https://www.360docs.net/doc/8c15868985.html,/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. No. 61, Kai-Fa Road, Nanzih Export Processing Zone , Kaohsiung, Taiwan / 高雄市楠梓加工出口區開發路61號 SGS Taiwan Ltd. 台灣檢驗科技股份有限公司 t + 886 (07)301 2121 f + 886 (07)3010867 https://www.360docs.net/doc/8c15868985.html,
Member of the SGS Group

Test Report
No. : KA/2016/C1575
Date : 2016/01/25
Page: 3 of 5
CHI-MEI CORPORATION 59-1, SAN CHIA, JEN TE, TAINAN CITY 71702, TAIWAN
Note： 1. mg/kg = ppm；0.1wt% = 1000ppm 2. n.d. = Not Detected 3. MDL = Method Detection Limit 5. This report supersedes all previous documents bearing the test report number KA/201X/XXXXX. 6. This is the additional test report of KA/201X/XXXXX which was issued on yyyy/mm/dd. Please refer to KA/201X/XXXXX for original information.
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the Company. This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at https://www.360docs.net/doc/8c15868985.html,/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at https://www.360docs.net/doc/8c15868985.html,/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. No. 61, Kai-Fa Road, Nanzih Export Processing Zone , Kaohsiung, Taiwan / 高雄市楠梓加工出口區開發路61號 SGS Taiwan Ltd. 台灣檢驗科技股份有限公司 t + 886 (07)301 2121 f + 886 (07)3010867 https://www.360docs.net/doc/8c15868985.html,
Member of the SGS Group

Test Report
No. : KA/2016/C1575
Date : 2016/01/25
Page: 4 of 5
CHI-MEI CORPORATION 59-1, SAN CHIA, JEN TE, TAINAN CITY 71702, TAIWAN
1) These samples were dissolved totally by pre-conditioning method according to below flow chart. （Cr6+ test method excluded） 2) Name of the person who made measurement: Alex Chang 3) Name of the person in charge of measurement: Ray Chang Cutting / Preparation
Sample Measurement
Pb 、 Cd
Acid digestion by suitable acid depended on different sample material (as below table)
Hg
Microwave digestion with HNO3/HCl/HF
Cr6＋
Add appropriate amount of digestion reagent
Heat to appropriate Filtration temperature to extract
Solution
Residue
Cool, filter digestate through filter
1) Alkali Fusion 2) HCl to dissolve ICP-AES
Add diphenyl-carbazide for color development
Measure the absorbance
Sample Material Steel, copper, aluminum, solder Glass Gold, platinum, palladium, ceramic Silver Plastic Others Digestion Acid
at 540 nm by UV-VIS
Aqua regia, HNO 3, HCl, HF, H2O2 HNO 3/HF Aqua regia HNO 3 H 2 SO4, H2O2, HNO 3, HCl Any acid to total digestion
Note**：(1) For non-metallic material, add alkaline digestion reagent and heat to 90~95 ℃. (2) For metallic material, add pure water and heat to boiling.
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the Company. This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at https://www.360docs.net/doc/8c15868985.html,/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at https://www.360docs.net/doc/8c15868985.html,/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. No. 61, Kai-Fa Road, Nanzih Export Processing Zone , Kaohsiung, Taiwan / 高雄市楠梓加工出口區開發路61號 SGS Taiwan Ltd. 台灣檢驗科技股份有限公司 t + 886 (07)301 2121 f + 886 (07)3010867 https://www.360docs.net/doc/8c15868985.html,
Member of the SGS Group

Test Report
No. : KA/2016/C1575
Date : 2016/01/25 2016/01/
Page: 5 of 5
59-1, SAN CHIA, JEN TE, TAINAN CITY 71702, TAIWAN
PBB/PBDE analytical FLOW CHART
1) Name of the person who made measurement: Anson Tsao 2) Name of the person in charge of measurement: Ray Chang First testing process Optional screen process Confirmation process Sample pretreatment Sample
Screen analysis
Sample extraction/ Soxhlet method
Concentrate/Dilute Extracted solution
Filter
Analysis by GC/MS
Issue Report
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the Company. This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at https://www.360docs.net/doc/8c15868985.html,/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at https://www.360docs.net/doc/8c15868985.html,/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. No. 61, Kai-Fa Road, Nanzih Export Processing Zone , Kaohsiung, Taiwan / 高雄市楠梓加工出口區開發路61號 SGS Taiwan Ltd. 台灣檢驗科技股份有限公司 t + 886 (07)301 2121 f + 886 (07)3010867 https://www.360docs.net/doc/8c15868985.html,
Member of the SGS Group