Intergraph CADWorx 2015 version 15.0.0.67安装教程
2024版CADWORX软件基础课程
掌握复杂曲面建模技巧
3
学习并掌握复杂曲面建模的技巧和方法，如放样、 扫掠、修剪等，以应对各种复杂曲面结构的建模 需求。
2024/1/29
18
模型优化和简化策略探讨
模型优化策略
通过减少多边形数量、优化数据结构 等方法，降低模型对计算机资源的消 耗，提高运行效率。
自动化脚本和插件应用
利用CADWORX的自动化脚本和插件 功能，实现模型的自动优化和简化， 提高工作效率。
模型简化策略
在保证模型精度和完整性的前提下， 通过删除冗余数据、合并相邻面等方 法简化模型，减小文件大小，提高传 输和加载速度。
2024/1/29
19
05
管道设计功能介绍与实战 演练
2024/1/29
7
02
CADWORX基本操作与设 置
2024/1/29
8
工作环境设置与优化
01
工作空间选择
根据用户需求和习惯，选择合适 的工作空间，提高操作效率。
2024/1/29
02
界面定制
03
系统配置
根据个人喜好，定制工具栏、快 捷键等界面元素，提升用户体验。
优化系统参数设置，如单位、精 度、自动保存等，确保软件稳定
选择合适的建模工具
熟悉CADWORX软件中的建模工 具，根据实际需求选择最合适的 工具进行建模。
分层建模
采用分层建模的方法，将复杂结 构拆分为多个简单的部分，提高
建模效率。
17
复杂结构建模技巧解析
1 2
利用CADWORX的高级功能 掌握CADWORX中的高级功能，如参数化建模、 布尔运算等，以应对复杂结构的建模挑战。
CADWorx2013中文操作手册(从入门到精通 by touefeel)共555页
CADWorxJuly 2012DICAS-PE-200007BCopyrightCopyright © 2003-2012 Intergraph Corporation. All Rights Reserved.Including software, file formats, and audiovisual displays; may be used pursuant to applicable software license agreement; contains confidential and proprietary information of Intergraph and/or third parties which is protected by copyright law, trade secret law, and international treaty, and may not be provided or otherwise made available without proper authorization from Intergraph Corporation.U.S. Government Restricted Rights LegendUse, duplication, or disclosure by the government is subject to restrictions as set forth below. For civilian agencies: This was developed at private expense and is "restricted computer software" submitted with restricted rights in accordance with subparagraphs (a) through (d) of the Commercial Computer Software - Restricted Rights clause at 52.227-19 of the Federal Acquisition Regulations ("FAR") and its successors, and is unpublished and all rights are reserved under the copyright laws of the United States. For units of the Department of Defense ("DoD"): This is "commercial computer software" as defined at DFARS 252.227-7014 and the rights of the Government are as specified at DFARS 227.7202-3.Unpublished - rights reserved under the copyright laws of the United States.Intergraph CorporationP.O. Box 240000Huntsville, AL 35813Terms of UseUse of this software product is subject to the End User License Agreement ("EULA") delivered with this software product unless the licensee has a valid signed license for this software product with Intergraph Corporation. If the licensee has a valid signed license for this software product with Intergraph Corporation, the valid signed license shall take precedence and govern the use of this software product. Subject to the terms contained within the applicable license agreement, Intergraph Corporation gives licensee permission to print a reasonable number of copies of the documentation as defined in the applicable license agreement and delivered with the software product for licensee's internal, non-commercial use. The documentation may not be printed for resale or redistribution.Warranties and LiabilitiesAll warranties given by Intergraph Corporation about equipment or software are set forth in the EULA provided with the software or applicable license for the software product signed by Intergraph Corporation, and nothing stated in, or implied by, this document or its contents shall be considered or deemed a modification or amendment of such warranties. Intergraph believes the information in this publication is accurate as of its publication date.The information and the software discussed in this document are subject to change without notice and are subject to applicable technical product descriptions. Intergraph Corporation is not responsible for any error that may appear in this document.The software discussed in this document is furnished under a license and may be used or copied only in accordance with the terms of this license. No responsibility is assumed by Intergraph for the use or reliability of software on equipment that is not supplied by Intergraph or its affiliated companies. THE USER OF THE SOFTWARE IS EXPECTED TO MAKE THE FINAL EVALUATION AS TO THE USEFULNESS OF THE SOFTWARE IN HIS OWN ENVIRONMENT.Intergraph is not responsible for the accuracy of delivered data including, but not limited to, catalog, reference and symbol data. Users should verify for themselves that the data is accurate and suitable for their project work.商标Intergraph、Intergraph标志、CADWorx和CAESAR II是Intergraph公司及其位于美国国内外的子公司的商标或注册商标。
CADWorx IP User Guide (1)
User Guide CADWorx InternetPublisherTable of ContentsChapter 1 CADWorx IP License Agreement 5Chapter 2 Installation 15 Conventions (15)Program Support/User Assistance (16)Installation Overview (17)Installation Start (17)External Software Lock (ESL) (26)ESL Installation (27)Chapter 3 Introduction 31 What is CADWorx IP (32)Chapter 4 Wizard 33 Step 1 (34)Step 2 (35)Step 3 (37)Step 4 (38)Step 5 (40)Step 6 (42)Step 7 (44)Appendix A ODBC Drivers 47 Index 53C H A P T E R1CADWorx IP License AgreementCopyright 2003 - 2011 Intergraph Corporation, All Rights Reserved.This License Agreement is Licensee’s proof of license.IF THE LICENSEE HAS A VALID SIGNED LICENSE WITH PP&M, THEN THAT WRITTEN LICENSE SHALL TAKE PRECEDENCE AND GOVERN THE USE OF THIS SOFTWARE.This Agreement does not apply to Site licensing, e.g., SmartPlant Enterprise for Owner/Operators Site License and SmartPlant Foundation Site License for Owner/Operators. Site licensing is governed by separate written agreement.Software License Agreement for Process, Power & Marine ("PP&M") Software ProductsLicensee should carefully read the following terms and conditions before installing this Software Product. This Software License Agreement is a legal agreement between the Licensee (either an individual or a single entity) and Intergraph Corporation, doing business as Process, Power & Marine (hereinafter referred to as "PP&M") for the PP&M Software Product with which this Software License Agreement is delivered. By installing, copying, downloading, accessing or otherwise using the Software Product, Licensee agrees to be bound by the terms of this Software License Agreement ("Agreement"). If Licensee does not agree with these terms, Licensee should promptly return this media package for a full refund.LICENSEPP&M provides this Software Product and licenses it to Licensee strictly for Licensee’s internal use and strictly in accordance with this Agreement. Licensee assumes responsibility for the selection of this Software Product to achieve Licensee’s intended results and for the installation, use, and results obtained from this Software Product. This Software Product is a proprietary product of PP&M and relevant third parties and is protected by copyright laws and international treaty. Title to this Software Product, or any copy, modification, or merged portion of this Software Product shall at all times remain with PP&M and such third parties. The Software Product is licensed, not sold. Any loading, use, or operation of the Software Product, other than as specified herein, is unauthorized and in violation of applicable copyright law and international treaty.Definitionsa. Documentation shall mean, whether in electronic or printed form, User's Guides, Installation Guides, Reference Guides, Administrator's Guides, Customization Guides, Programmer's Guides, Configuration Guides and Help Guides delivered with a particular Software Product supplied by PP&M to Licensee. Not all of the previous types of Documentation are delivered with each Software Product supplied by PP&M.b. Key shall mean an authorization code or a hardware device attached to a computer for the purpose of authenticating the software licensed hereunder (dongle) issued from PP&M to permit one licensed user to operate on the LAN. Each licensed user requires a separate Key.6CADWorx Internet Publisher User Guidec. LAN shall mean a Local Area Network utilizing Ethernet, wireless, fiber optic, or any other enabling technology. For the purposes of software licensing, a LAN is the portion of the network which exists within a radius of five (5) miles (8 kilometers) of the software license server.d. Licensee shall mean the individual or organization to whom this license has been granted by PP&M.e. PDA shall mean Personal Digital Assistant.f. Site shall mean a consolidated LAN that receives delivery of the Keys for associated LANs within a five(5) mile radius of the consolidated LAN.g. SmartPlant License Manager (SPLM) shall mean the client/licensing machine software that manages and tracks the concurrent use of application Software Product licenses for certain PP&M Software Products.h. Software Product includes computer software and all of the contents of the files, disks(s), CD-ROM(s) or other media with which this Software License Agreement is provided, including any templates, data, printed materials, and "online" or electronic Documentation, all copies, and any upgrades, modified versions, and updates (which will be provided if the Software Product is covered under a current Software Maintenance Service Contract) of the Software Product.i Thin-Client shall mean computing technology which enables remote operation of software via screen terminals, computers acting as screen terminals, handheld devices, or other hardware devices which do not require software or software licenses to be resident on the device in order for it to be accessed and used by a User.j. User shall mean the Licensee and its duly authorized employees.k. WAN shall mean a Wide Area Network utilizing Ethernet, wireless, fiber optic or any other enabling technology. WAN shall also include Virtual Private Network (VPN) technologies. For the purposes of software licensing, a WAN is the portion of the network which exists beyond five (5) miles (8 kilometers) of the software license server.License Grant. This Agreement grants Licensee one of the following non-exclusive and non-assignable licenses. The price list description pages attached to the sales quotation and the bar code serial number sticker included with the Software Product will designate the type of license granted.a. "Concurrent-use software" is designated by CU in the product description. Each license for CU software permits a single concurrent use on the specified type of workstation and operating system. If Licensee has multiple licenses for the Software Product, then at any time Licensee may have as many copies of the Software Product in use as Licensee has licenses. Unless otherwise specified, the license is restricted to a LAN. There is a single use of CU software when it is loaded into memory for execution or when it is stored on hard disk, or both, on a single workstation. A copy stored on hard disk on a network server for the sole purpose of execution by network workstations is not in use on the network server. If the anticipated number of Users of the Software Product will exceed the number of applicable licenses, then Licensee must have a reasonable mechanism or process in place to assure that the number of persons using the Software Product concurrently does not exceed the number of licenses.CADWorx IP License Agreement7b. "Standard Concurrent-use software" is designated by CS in the product description. Each license of CS software permits either (1) unlimited (24 hrs/day) desktop use OR (2) remote application server or portal server use up to 12 hours/day. CS software cannot be used on both a single workstation and on a remote application server or portal server. An "Extended Concurrent-use" (CX) license is required for use on both a single workstation and on a remote application server or portal server. Each license for CS software permits a single concurrent use on the specified type of workstation and operating system. If Licensee has multiple licenses for the Software Product, then at any time Licensee may have as many copies of the Software Product in use as Licensee has licenses. There is a single use of CS software when it is loaded into memory for execution on a single workstation or remote application server. A copy stored on hard disk on a network server for the sole purpose of execution by network workstations is not in use on the network server. If the anticipated number of Users of the Software Product will exceed the number of applicable licenses, then Licensee must have a reasonable mechanism or process in place to assure that the number of persons using the Software Product concurrently does not exceed the number of licenses.c. "Extended Concurrent-use software" is designated by CX in the product description. Each license of CX software permits (1) unlimited remote application server or portal server use (24 hours/day) OR (2)any combination of single workstation use and remote application server or portal server use. Each license for CX software permits a single concurrent use on the specified type of workstation and operating system. If Licensee has multiple licenses for the Software Product, then at any time Licensee may have as many copies of the Software Product in use as Licensee has licenses. There is a single use of CX software when it is loaded into memory for execution on a single workstation or remote application server.A copy stored on hard disk on a network server for the sole purpose of execution by network workstations is not in use on the network server. If the anticipated number of Users of the Software Product will exceed the number of applicable licenses, then Licensee must have a reasonable mechanism or process in place to assure that the number of persons using the Software Product concurrently does not exceed the number of licenses.d. "Concurrent-use WEB Access software" is designated by CW in the product description. Each license for CW software permits a single concurrent use on the specified type of workstation and operating system. If Licensee has multiple licenses for the Software Product, then at any time Licensee may concurrently use as many copies of the Software Product as Licensee has licenses. Unless otherwise specified, the license can be utilized over a LAN, WAN or standalone workstation. A single use of CW software is defined when the Software Product is loaded into memory for execution on a single workstation, regardless of whether said use is accessed from the network server or from the workstation hard drive. The copy of the Software Product stored on the hard drive of a network server for the sole purpose of execution by network workstations is not deemed as an "in use" copy of the licensed Software Product. If the anticipated number of Users of the Software Product will exceed the number of applicable licenses, then Licensee must have a reasonable mechanism or process in place to assure that the number of persons using the Software Product concurrently does not exceed the number of licenses.e. "Server software" is designated by VR in the product description. Each license for VR software permits a single copy of VR software to be stored on hard disk and loaded for execution on the specified type of network server and operating system. Each license for VR software permits a designated number of Users to simultaneously access the Software Product on the network server. It is the responsibility of the Licensee to assure that no more than the licensed number of Users access the VR software simultaneously at any one time.f. "Single-use software" is designated by SU in the product description. Each license for SU software permits a single copy to be stored on hard disk and loaded for execution on a single designated workstation and operating system. It is the responsibility of the Licensee to assure that SU software is not moved to a second workstation until it has been completely removed from the first workstation.8CADWorx Internet Publisher User Guideg. "Named User software" is designated by NU in the product description. A Named User is defined as a individual employed by the Licensee who is authorized by the Licensee to use the Software Product and associated Software Product programs on the designated system under the terms of the License Agreement, regardless of whether the individual is actively using the Software Product programs at any given time. The number of Named Users is determined by simply counting the number of people who will have access to the Software Products.h. If this Software Product is purchased as an upgrade or provided as an update to a previous version of licensed software, this Software Product may be used only to replace the previous version, and no additional license is granted. This Software Product and the previous version may not be separately used or transferred to a third party.i. For the continued use of some Software Products it may be necessary for Licensee to reregister and obtain new license Keys from time to time.The language in Sections a-i above shall apply except for the license of the token version of SmartPlant Foundation software. The token version of SmartPlant Foundation software is licensed as follows:a. Token-based applications are licensed as "Server Software." Each license for Server Software permits a single copy of Server Software to be stored on hard disk and loaded for execution on the specified type of network server and operating system. Token-based applications may require the installation of client-based software on local user nodes (e.g., personal computers, workstations, etc.). Such client-based software may be installed on an unlimited number of user nodes. Access to the SmartPlant Foundation token-based application through these user nodes will require the following access mechanism:(i) A "Daily Token" is an access mechanism that allows up to twelve (12) hours of continuous access (clock time) to the Server Software after which time another Daily Token will be required. Daily tokens are used as an access mechanism in the purchase model.b. If this Software Product is purchased as an upgrade or provided as an update to a previous version of licensed software, this Software Product may be used only to replace the previous version, and no additional license is granted. This Software Product and the previous version may not be separately used or transferred to a third party.Licensee and Users may:1. Copy this Software Product into any machine-readable or printed form solely for backup purposes in support of Licensee’s licensed use of the Software Product;2. Modify this Software Product and/or merge it into another software program for licensed use (any portion of this Software Product merged into another software program will continue to be subject to the terms and conditions of this Agreement);3. Transfer this Software Product and license within Licensee’s Company (intra-company transfer) as set forth in the PP&M Software Transfer Policy. A copy of the PP&M Software Transfer Policy is available upon request. If Licensee does transfer a seat or seats of this Software Product, Licensee must at the same time either transfer all copies, modifications, or merged portions of the seat(s) being transferred, in whatever form, to the same party, or Licensee must destroy those not transferred. "Company" includes Licensee’s own company or a company or organization in which the transferring entity owns a fifty percent (50%) or greater interest.4. Use the Software Product only in accordance with PP&M’s education policy in those cases where an education license has been granted. This policy is available on request.CADWorx IP License Agreement95. The Licensee may install SPLM license Keys on in a virtualized environment provided that the virtualized environment is configured in such a manner to safeguard against duplication of the SPLM license Keys. This configuration is not supported, and Licensee uses the license management system in a virtual configuration at its own risk.Licensee must reproduce and include the copyright notice on any copy, modification, or portion of this Software Product merged into another software program.Licensee and Users may not:1. Transfer this Software Product and license to another company or entity (inter-company transfer). If Licensee does transfer possession of any copy, modification, or merged portion of the Software Product to another party except as expressly provided herein, the license is automatically terminated.2. reverse engineer, decompile, disassemble or otherwise attempt to discover the source code, underlying user interface techniques or algorithms of the Software Product by any means whatsoever, directly or indirectly, or disclose any of the foregoing, except to the extent Licensee may be expressly permitted to decompile under applicable law in the European Union, in order to achieve necessary operability of the Software Product with another software program, and Licensee has first requestedPP&M to provide the information necessary to achieve such operability and PP&M has not made such information available. PP&M has the right to impose reasonable conditions and to request a reasonable fee before providing such information. Any information supplied by PP&M or obtained by Licensee, as permitted hereunder, may only be used by Licensee for the purpose described herein and may not be disclosed to any third party or used to create any software which is substantially similar to the expression of the Software Product. Requests for information from Users in the European Union with respect to interoperability should be directed to the Services group for the local PP&M office or write Process, Power &Marine, 300 Intergraph Way, Madison, AL 35758.3. Use, copy, modify, sell, or transfer this Software Product, or any copy, modification, or merged portion, in whole or in part, except as expressly provided for in this Agreement.4. Circumvent the licensing, Keys, files, and/or policy.5. Access this Software Product using Thin Client technology (Citrix, Microsoft Terminal Server, wireless PDAs like PalmPilots, etc.) from a remote application server or portal server without purchasing CS, CX, or CW licenses from PP&M.6. Install this license on a WAN unless otherwise permitted in writing by PP&M or unless special WAN licenses are being used.For SmartPlant Foundation licenses, only the prohibitions of 1-4 above shall apply.AUDITPP&M shall have the right, during Licensee’s normal business hours, to audit the Licensee’s use of the licensed Software Product and Licensee's compliance with the provisions of this Agreement. PP&M must give Licensee thirty (30) days advance written notice prior to an audit. The right of audit shall be limited to once per calendar year. Prior to the start of an audit, PP&M’s personnel, or third party personnel under the direction of PP&M, will sign a non-disclosure agreement to be provided by Licensee. During the audit, PP&M's personnel or third party personnel, if applicable, will be provided reasonable access to both Licensee's records and personnel. The cost of the audit shall be paid by PP&M unless the results of the audit indicate that Licensee has underpaid fees to PP&M, in which case, the Licensee agrees to promptly pay PP&M such fees at the price previously agreed to for such licensed Software Product and further agrees to bear all costs associated with the audit.10CADWorx Internet Publisher User GuideDOCUMENTATIONPP&M provides standard online Documentation with purchased Software Products. Licensee has the right to print online Documentation as needed for Licensee’s internal purposes.TERMThe license is effective until terminated. Licensee may terminate it at any time by destroying this Software Product together with all copies, modifications, and merged portions in any form. It will also terminate upon conditions set forth elsewhere in this Agreement or upon (i) Licensee’s failure to comply with any term or condition of this Agreement, (ii) any unauthorized transfer of possession of the licensed Software Product or any copy, derivative incorporation thereof, (iii) circumvention of the Software Product protection device, if any exists, or this Agreement, or (iv) if Licensee fails to pay the appropriate license fee(s). Upon termination of this Agreement, Licensee agrees to return to PP&M or destroy this Software Product together with all copies, modifications, and merged portions in any form.PP&M’S WARRANTIESPP&M warrants and represents that it has the right to grant this license. Additional warranties may be provided by the local selling entity from whom Licensee purchased this license. The local selling entity of this license is solely responsible for any such warranty, and PP&M disclaims any liability therefor.DISCLAIMER OF WARRANTIESEXCEPT AS PROVIDED HEREIN, PP&M MAKES NO REPRESENTATIONS OR WARRANTIES WITH RESPECT TO THE SOFTWARE PRODUCT, EXPRESS OR IMPLIED, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.IF UNDER THE LAW RULED APPLICABLE TO THIS AGREEMENT ANY PART OF THE ABOVE DISCLAIMER OF EXPRESSED OR IMPLIED WARRANTIES IS INVALID, THEN PP&M DISCLAIMS EXPRESS OR IMPLIED WARRANTIES TO THE MAXIMUM EXTENT ALLOWED BY SAID LAW. LIMITATION OF DAMAGESIN NO EVENT WILL PP&M BE LIABLE FOR ANY DIRECT, INDIRECT, CONSEQUENTIAL INCIDENTAL, SPECIAL, OR PUNITIVE DAMAGES, INCLUDING BUT NOT LIMITED TO, LOSS OF USE OR PRODUCTION, LOSS OF REVENUE OR PROFIT, LOSS OF DATA, OR CLAIMS OF THIRD PARTIES, EVEN IF PP&M HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.UNDER NO CIRCUMSTANCES SHALL PP&M’S LIABILITY UNDER THIS AGREEMENT EXCEED THE AMOUNT THAT PP&M HAS BEEN PAID BY LICENSEE UNDER THIS AGREEMENT AT THE TIME THE CLAIM IS MADE. EXCEPT WHERE PROHIBITED BY APPLICABLE LAW, NO CLAIM, REGARDLESS OF FORM, ARISING OUT OF OR IN CONNECTION WITH THIS AGREEMENT MAY BE BROUGHT BY LICENSEE MORE THAN TWO (2) YEARS AFTER THE EVENT GIVING RISE TO THE CAUSE OF ACTION HAS OCCURRED.IF UNDER THE LAW RULED APPLICABLE TO THIS AGREEMENT ANY PART OF THIS SECTION IS INVALID, THEN PP&M LIMITS ITS LIABILITY TO THE MAXIMUM EXTENT ALLOWED BY SAID LAW. EXPORT CONTROLSCADWorx IP License Agreement11PP&M’s Software Products and any third-party Software Products obtained from PP&M, its subsidiaries, or distributors (including any Documentation or technical data related to these products) are subject to the export control laws and regulations of the United States. Diversion contrary to U.S. law is prohibited. These Software Products, and the direct product thereof, must not be exported or re-exported, directly or indirectly (including via remote access) under the following circumstances:a. To Cuba, Iran, North Korea, Sudan, or Syria, or any national of these countries.b. To any person or entity listed on any U.S. government denial list, including but not limited to, the U.S. Department of Commerce Denied Persons, Entities, and Unverified Lists,/complianceandenforcement/liststocheck.htm, the U.S. Department of Treasury Specially Designated Nationals List, /offices/enforcement/ofac/, and the U.S. Department of State Debarred List, /compliance/debar.html.c. To any entity when Licensee knows, or has reason to know, the end use of the Software Product is related to the design, development, production, or use of missiles, chemical, biological, or nuclear weapons, or other un-safeguarded or sensitive nuclear uses.d. To any entity when Licensee knows, or has reason to know, that an illegal reshipment will take place.Any questions regarding export or re-export of these Software Products should be addressed to Intergraph Corporation’s Export Compliance Department, Huntsville, Alabama 35894, USA. Licensee shall hold harmless and indemnify PP&M for any costs and or damages resulting to PP&M from a breach of this Article by Licensee.GENERALIf this Software Product is acquired directly or indirectly on behalf of a unit or agency of the United States Government, this provision applies. For civilian agencies: This Software Product was developed at private expense and is "restricted computer software" submitted with restricted rights in accordance with subparagraphs (a) through (d) of the Commercial Computer Software - Restricted Rights clause at52.227-19 of the Federal Acquisition Regulations ("FAR") and its successors, and is unpublished and all rights are reserved under the copyright laws of the United States. For units of the Department of Defense ("DoD"): This Software Product is "commercial computer software" as defined at DFARS 252.227-7014 and the rights of the Government are as specified at DFARS 227.7202-3.Any attempt to sublicense, assign, or transfer the license or the Software Product except as expressly provided in this Agreement is void.Whenever possible, each provision of this Agreement and each related document shall be interpreted in such a manner as to be effective and valid under applicable law. However, if any provision of this Agreement or any related document shall be prohibited by or invalid under applicable law, such provision shall be ineffective only to the extent of such prohibition or invalidity without invalidating the remainder of such provision or the remaining provisions of this Agreement or such related document.This Agreement will be governed by the laws of the State of Alabama. Jurisdiction and venue for any dispute arising from this Agreement or relating to the Software Product shall be in the United States District Court for the Northern District of Alabama, Northeastern Division, or the Circuit Court for Madison County, Alabama. The parties waive the application of the United Nations Commission on International Trade Law and United Nations Convention on Contracts for the International Sale of Goods as to the interpretation or enforcement of this Agreement.12CADWorx Internet Publisher User GuideLicensee agrees that it will hold all parts of the Software Product and Documentation in confidence and will not sell, transfer, loan or make disclosure of the Software Product to any of its partners and third parties, unless specifically provided for in this Agreement.Should Licensee have any questions concerning this Agreement, Licensee may contact the local PP&M office or write Process, Power & Marine, 300 Intergraph Way, Madison, AL 35758.SUPPORT SERVICESMaintenance of licensed Software Products may be provided at a separate charge and in accordance with PP&M’s standard maintenance options and the then current "Software Maintenance Service Contract", a copy of which is available upon request. Maintenance services for reference data are not included under PP&M’s standard Software Maintenance Services Contract. A subscription service for reference data may be available under separate agreement.Please contact the local sales representative for information about PP&M’s current maintenance options. UPGRADES AND UPDATESUpgrades, when and as available, will be provided at a separate charge.Intergraph is a registered trademark of Intergraph Corporation. Other brands and product names are trademarks of their respective owners. PP&M is not responsible for inadvertent errors.THE FOLLOWING ADDITIONAL LANGUAGE IS APPLICABLE WHEN LICENSING CERTAIN INTERGRAPH CADWORX & ANALYSIS SOLUTIONS, INC. ("ICAS") SOFTWARE PRODUCTS:Limited Run License. For certain Software Products owned by ICAS and so designated in eLicense, a limited run license may be available. A limited run license expires after a specified number of analytical calculations have been executed. For example, in CAESAR II, an analysis is defined as an individual static or dynamic pipe stress analysis calculation. Limited run licenses are sold in multiples of fifty (50) calculations.CAESAR II, PV Elite, CADWorx Design Review, CADWorx Design Viewer, and CodeCalc Software Products. CAESAR II, PV Elite, CADWorx Design Review, CADWorx Design Viewer, and CodeCalc Users are hereby notified that Tech Soft 3D, L.L.C., 931 Ashby Ave., Berkeley, CA 94710 ("Tech Soft 3D") is a third-party beneficiary to this Agreement to the extent that this Agreement contains provisions which relate to CAESAR II, PV Elite, CADWorx Design Review, CADWorx Design Viewer, and/or CodeCalc Users’ use of the Software Product. Such provisions are made expressly for the benefit of Tech Soft 3D and are enforceable by Tech Soft 3D in addition to PP&M.CAESAR II and CADWorx Design Review Software Products. CAESAR II and CADWorx Design Review contain Autodesk® RealDWG by Autodesk, Inc., copyright © Autodesk, Inc. All rights reserved. Autodesk, Inc., 111 McInnis Parkway, San Rafael, California 94903 ("Autodesk") is a third-party beneficiary to this Agreement to the extent that the Software Product contains RealDWG and to the extent that the provisions herein relate to Licensee’s use of the Software Product containing RealDWG. Such provisions are made expressly for the benefit of Autodesk and are enforceable by Autodesk in addition to PP&M. Trademarks. AutoCAD, ObjectARX, and RealDWG are trademarks of Autodesk. HOOPS is a trademark of Tech Soft 3D, L.L.C. Other trademarks are the property of their respective owners.THE FOLLOWING ADDITIONAL LANGUAGE IS APPLICABLE WHEN LICENSING SMARTPLANT ELECTRICAL DETAILED OR SIGRAPH SOFTWARE PRODUCTS:。
Intergraph CADWorx 2015 version 15.0.0.67安装教程
Intergraph CADWorx 2015 version 15。
0。
0.67安装教程1、首先看一下没有安装“Intergraph CADWorx 2015 version 15。
0。
0。
67”软件时的Autocad软件的启动画面，如下（安装完后工具栏会有不同，请注意比较）2、在群共享里下载:Intergraph CADWorx 2015 version 15.0。
0.67.part1（约705MB）、IntergraphCADWorx 2015 version 15。
0.0。
67.part2（约2。
18MB)两个文件。
3、右击“Intergraph CADWorx 2015 version 15。
0.0。
67.part1"压缩包，解压到:“IntergraphCADWorx 2015 version 15.0.0。
67"文件夹。
4、打开上述文件夹，双击“setup”文件，会弹出下面对框,点next安装（可能有的机器没有此步骤,说明之前装其它软件时，可能已经装好了，直接跳入第5步）。
5、上述Mircrosoft。
NET Framework 4.0安装完后会出现下面对话框：点击next出现：确定后,6、点上图“Yes”后,出现下面对话框：7、再点击图标，表示嵌入到AutoCAD软件里了，后出现下面对话框：8、点击“next”后出现下面对话框：9、勾选，后,出现下面对话框：向你要Serial。
10、此时打开上述文件夹“Intergraph CADWorx 2015 version 15。
0.0.67"中的Crack文件夹中的“Seriall”记事本文件，输入对应的Serial号。
10、点击next，并修改安装目录路径为D盘11、一直点击Next直到出现下图:12、点击绿色的USB图标后，如下图：13、继续点击Next,直到完成安装。
最后点击确定。
再次点击OK。
14．如果出现以下对话框:表明你缺少文件(win7系统基本不会出现此种情况），到网上下载对应的文件就可以了。
cadworx安装图文教程
Cadworx2014 安装教程（已测试完）步骤1：点击进入install_splm 文件夹，点击setup.exe 文件，选择SmartPlant License M anager Installation 选项，点击2次next 按钮，再点击display ... 按钮会跳出一个PDF 文档，关闭后Yes 按钮由灰色变成黑色，点击Yes 按钮后，选择License Machine 选项，最后点击finish 按钮即安装完毕。
步骤2：点击windows 的开始按钮，点击“所有程序”按钮，运行Intergraph SmartPlant License M anager 下的Generate Machine ID 程序点击“是（Y）”按钮，点击.. 按钮(选择要存储ID 文本的目录)，再点击OK 按钮。
程序运行完后会在你选择的存储目录下生成一个txt 文件即为Machine ID 文档。
步骤3：点击keygen 文件夹keygen.exe 和SPKeygen.exe这2个程序。
点ok（个别系统可能会出现无法运行SPKeygen.exe 这个文件，处理方法：①杀毒软件添加信任②重启电脑）。
复制Hardware fingerprint: 后面8位字母或数字把这八个字母或数字粘贴进运行keygen.exe 出现界面中的HWID :下面的范围内，把keygen.exe 出现界面中Name ：里的字母（我这里是Administrator ）粘贴进SPKeygen.exe 程序界面Name ：里，把keygen.exe 出现界面中Serial ：里的系列号粘贴进SPKeygen.exe 程序界面Key ：里，然后点击OK SPKeygen.exe 提示成功进入新界面。
进入新界面（界面名称Intergraph Software -SPLM 11.00.17 ），把“步骤2” 中的Machine ID 文档中的Machine ID 粘贴进新界面中Machine ID ：下，点击新界面中的CadW orx按钮，在6个框内分别输入100 ，点击Done 按钮，再在新界面expiray day 下输入500 （1~735 之间的过期天数即可。
三、Cadworx设备建模
总图参照
相对路径和绝对路径的区别是什么？ 绝对路径：待参照文件的绝对位置不能变。 相对路径：参照文件和总图文件相对位置不
变即可。 附着 和覆盖的区别是什么？
覆盖（二次覆盖不显示）
以覆盖的方式插入外部参照，若插入的外部 参照图形自身包含被覆盖的外部参照，当前 图形文件不会显示被覆盖的外部参照。
(9) 支耳(吊耳)、支腿
支耳（吊耳）见演示 支腿的设置。
选择型钢 旋转角度 基板厚度 底板长宽高与设备间距。
动设备——泵（第二行）
叶轮（父元件）——泵的基础必须在叶轮上添 加
传动轴 联轴器 电机 基础（子元件，附属元件） 管嘴（子元件，附属元件） 主要是大致轮廓，需要注意泵的总长度、宽度，
搜索路径中。 找到 cadworx2015/plant/support/acad.rx 写字板打开上述文件，加入一行
cadworxEquipment2015.arx 然后保存 命令行 键入 em 或者 工厂-设备面板
1 软件设置
1 软件设置
菜单栏
设备控制面板
元件区：第一行静设备，第二行动设备和设置、帮助
长度 （Length）是封头直边的长度（图中h1）
(2)封头（碟形封头）
图中，长度ha（length）也是直边段长度，转向节半径r （过渡圆弧半径）是144.75
蝶形半径R是2413，直径2400为图中D值。
(3)封头（球形封头）
图中，长度ha （length）也是直
边段长度，直径 2400为图中Di值。
三、Cadworx设备建模
主要内容
1 软件设置 2 设备建模
静设备建模（元件：筒体、各种封头、法兰、 管嘴（管口）、支架、吊耳、鞍座）
Intergraph.CADWorx.2015(Equipment,P&ID.pro,Plant.pro) 智能三维工厂设计及建模解决方案CADWorx
鹰图CADWorx Plant Professional包括进行高效工厂设计所需的最全面的工具。CADWorx Plant简单易学，并已帮助成千上
万的公司更快、更准确的创建创收的交付。
智能3D管道设计
通过等级驱动进行设计
钢结构模块
设备模块
通风管道电缆桥架模块
实时碰撞检查
管段图生成
实时数据库链接
模型—P&ID同步
模型浏览漫游检查模块
包含Intergraph CADWorx P&ID 标准版
与管道压力分析软件和压力容器设计分析软件具有双向接口
ห้องสมุดไป่ตู้
鹰图CADWorx P&ID包括轻松创建智能流程图所需的一切。CADWorx P&ID通过制作图表以及其锁定的信息而释放P&ID的功能，
从而提供给所有利益相关者。
快速直观的创建P&ID
具有大量、用户可修改的图例库
等级驱动的P&ID
与项目数据库的双向链接
元件和项目文件关联
P&ID/与3维模型同步
旧图纸智能转换
P&ID项目图纸发布
自动仪表回路图
生成仪表数据表
生成设备数据表
■ 邮件：hgrjw@ buysoftware@ ■
■ 请 按 Clrt+F 查找， 输入 具体 关键字 查询（不要全部输入） ■
■□■□■□■□■□■□■□■ 长 期 有 效 □■□■□■□■□■□
CADworx中文版帮助(未完)
约定在回顾本指南，重要的是要理解这些术语和文档中使用的约定。
使用下面的信息来确定公约和类型的信息。
约定资料类别<INSTALL-DIR> 这指的是您的计算机上CADWorx安装目录。
例如，C：\CADWorxPlant。
代替你的安装目录的任何地方使用这个符号。
<ACAD-DIR> 这是指你AutoCAD的安装目录。
例如，C：\ AutoCAD 2000i。
代替你的安装目录的任何地方使用这个符号。
<CD-DRIVE> 这是指您的CD - ROM驱动器。
替代您的CD - ROM驱动器在任何地方使用这个符号。
Command Line 项目必须输入或出现在AutoCAD的命令行。
User Responses这是指用户的反应，命令提示。
Commands CADWorx和AutoCAD命令。
选项命令行选项CAPITALS AutoCAD的系统变量或关键字。
KEY+KEY 组合键的用户必须按住一个键，然后按一个，例如，按CTRL + P 或Alt + F4关闭。
计划支持/用户帮助CADWorxPlant开发了设计师和工程师，设计师和工程师。
CADWorxPlant的设计针对性的易用性，广泛应用，转让链接到管道压力，克服了其他管道CAD软件包的限制。
CADWorxPlant可以提供字形，等长，和三维模型。
与其他软件，比如的NavisWorks，实时演练和近阴影照片质量可以生成演示。
在许多情况下，困难和目前的软件产品的不完备使得绘制三维一偶然事件。
CADWorxPlant解决这些问题-模型可以产生单线成字形平面图和立面图，或转换成三维打开。
另外，该模型可以构造最初使用的3D对象。
在AutoISO选项使Word 自动建立，放手经营管网图。
CADWorxPlant一个主要功能是它的双向数据与管道应力程序凯撒二链接。
使用此链接，一个模型可以生成民航方面，转入分析和修改到凯撒二，然后改变模式转移绘制修改回来。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
Intergraph CADWorx 2015 version 15.0.0.67安装教程
1、首先看一下没有安装“Intergraph CADWorx 2015 version 15.0.0.67”软件时的Autocad软
件的启动画面，如下（安装完后工具栏会有不同，请注意比较）
2、在群共享里下载：Intergraph CADWorx 2015 version 15.0.0.（约705MB）、Intergraph
CADWorx 2015 version （约）两个文件。
3、右击“Intergraph CADWorx 2015 version 15.0.0.1”压缩包，解压到：“Intergraph CADWorx
2015 version .0.67”文件夹。
4、打开上述文件夹，双击“setup”文件，会弹出下面对框，点next安装（可能有的机器没
有此步骤，说明之前装其它软件时，可能已经装好了，直接跳入第5步）。
5、上述Framework 安装完后会出现下面对话框：
点击next出现：
确定后，
6、点上图“Yes”后，出现下面对话框：
7、再点击图标，表示嵌入到AutoCAD软件里了，后出现下面对话框：
8、点击“next”后出现下面对话框：
9、勾选，后，出现下面对话框：
向你要Serial。
10、此时打开上述文件夹“Intergraph CADWorx 2015 version 15.0.0.67”中的Crack文件夹中的“Seriall”记事本文件，输入对应的Serial号。
10、点击next，并修改安装目录路径为D盘
11、一直点击Next直到出现下图：
12、点击绿色的USB图标后，如下图：
13、继续点击Next，直到完成安装。
最后点击确定。
再次点击OK。
14．如果出现以下对话框：表明你缺少文件（win7系统基本不会出现此种情况），到网上下载对应的文件就可以了。
14、最后点击Finish重启电脑：
15、重启电脑完电脑，桌面上会多出4
个图标。
16、回到“Intergraph CADWorx 2015 version 15.0.0.67”文件夹。
打开后，进入“Crack”
后，复制里面的4个文件夹，粘贴到安装CADworx的目录里并替换掉原来的文件，如：刚刚安装在D盘的“D:\CADWorx 2015”
17、任意单击某一个图标，启动程序，如单击：，出现以下对话框：
点击Close就可以进入AutoCAD软件中了，此时，看看多了什么？
18、附软件下载：
链接：密码：j3uh。