GeN2-Regen培训资料
ATS-2基本培训资料-3.0
ATS-2基本培训资料-3.0Audio PrecisionATS-2 培训资料目录Analog Generator Panel --------------------------------------------------------------------------------3 Analog Input & Analyzer—Analog Panel -----------------------------------------------------------4 Sweep Panel -----------------------------------------------------------------------------------------------6 Sweep for External Source Panel ---------------------------------------------------------------------7 Digital Generator Panel --------------------------------------------------------------------------------8 Analyzer—Digital Panel --------------------------------------------------------------------------------9 Digital I/O Panel ----------------------------------------------------------------------------------------10附录--------------------------------------------------------------------------------------------------------12Analog Generator注：1 输出信号的种类，常用信号有：Sine,IMD,Square,Noise.。
Genie 2000培训教程LYNX_1111
105
编辑样品信息（1）
在存储谱文件之前，选择Edit中Sample Info….,编
辑样品信息。
106
编辑样品信息（2）
输入完样品信息之后，点Load Cal…,调用合适的效
率刻度文件。
107
调用效率刻度文件（1）
输入完样品信息之后，点Load Cal…,调用合适的效
57
基本操作内容
硬件（LYNX）的控制 显示界面调整 参数预置和谱获取 谱仪能量刻度
谱仪效率刻度
谱分析
谱存储
58
调用LYNX（1）
启动谱获取和分析(Gamma
Acquisition & Analysis)程
序
59
调用LYNX（2）
点击File
Open工具靶
60
调用LYNX（3）
24
编辑定义LYNX （6）
从Settings的下拉菜单内选择Input
25
编辑定义LYNX （7）
在Input Name栏内输入探测器识别名
26
编辑定义LYNX （14）
从File的下拉菜单内选择Save as
27
编辑定义LYNX （15）
输入文件名(File
Name)和描述(File Descrition),点击 Save，编辑定义完毕。
20
编辑定义LYNX （2）
选择通讯接口（例如：Network MCAs)
21
编辑定义LYNX （3）
点击USB前面的+，得到下图界面，选择其中的 Lynx MCA，点击Add和Done。
西子奥的斯海外经典应用(英文版)
序号项目名称类型图片主要梯型1Hong KongInternationalAirportTransport Hub XO21NP2Saudi ArabiaMetro projectsTransport HubFOVFOH5000XOPE3Taipei MRT Transport Hub XO21NP GeN24Greece AthensMetroTransport Hub XOPE5Italy Line AllfnaInfeniore MetroTransport Hub XOPE6Mumbai Metro Transport Hub GeN2-Regen7‘City Center’Mega MallShopping MallXO-508XOPFOVFGeN28India Dreams Mall Shopping Mall OH5000 STAR9India EON Mall Shopping Mall OH500010Jakarta CityCenterShopping MallSTARXO21VFOH500011Panama MetroMall Shopping Mall XO-508 OH5000 FOVF GeN212SingaporeHarbourfront MallShopping MallSTARXOP13UAE Emirates Mall Shopping MallFOVF GeN2 XO21VF14Brazil OlympicCommercial CenterCommercialCenterXO-508OH500015Guatemala TorreRealCommercialCenterGeN2OH500016Guatemala ZonaPraderaCommercialCenterOH5000XO-50817Malaysia P.JTrade CentreCommercialCenterOH5000GeN218Malaysia SolarisDutamasCommercialCenterXO-508 XOP19Yas Island in AbuDhabiCommercialCenterGeN2XO-50820Beijing SubwayLine 5Transport Hub XO21NP21Beijing SubwayDaxing LineTransport Hub XO-PE22Beijing SouthRailway StationTransport HubXO21NPGeN223Beijing CapitalInternationalAirportTransport Hub XO21NP24Beijing WestRailway StationTransport HubXO21NPXO50825Beijing OlympicSports CenterGymnasiumTransport Hub OH500026Shanghai SubwayLine 2 EastExtension, Line11 North SectionTransport Hub XO21NP27Hangzhou SubwayLine 1Transport Hub XO21NP28Tianjin RailwayStationTransport HubXO21NPGeN229Shenyang OlympicSports CenterPublic ProjectGeN2OH5000MRL30Hangzhou GrandTheatrePublic Project XO21VF31Hangzhou CivicCenter - CulturalWave CityShopping MallXOPXO21NP32Hangzhou CivicCenter -AdministrationBuilding &Business BuildingPublic Project E41133Yangtze Gorges Public Project XO-PE34Beijing SubwayLine 10Transport HubXO21NPXO-PE台量项目概况24Hong Kong International Airport (HKIA) is located less than five flying hours from half of the world's population.It is the fourth busiest international passenger airport and operate the busiest international cargo facilities in the world. XOEC provide 24 XO21NP escalators for Hongkong airport.146Mecca, the third largest city, has population of 700,000. Mecca is also the holy city, Islam first, where every Muslim looks forward to pilgrimagein their lifetime. Every year,Muslim pilgrimage who comes from more than 70 countries comes here, so the traffic during the Hajj has been adifficult problem. To alleviate the traffic pressure during the pilgrimage, the Saudi king ordered to start Mecca metro project early in 2008 Mecca. Xizi Otis will supply 138 elevators& 18 public escalators for this project.40Taipei MRT(Taipei Mass Rapid Transit System), is the first transit system in Taipei. This project connects Taipei and the countries of Taipei city, and carrying on the main public traffic in Taipei City.XOEC supplied 31 XO21NP public escalators and 9 GeN2 passenger elevators.23Greece Metro, one of the busiest undergroundpublic transportation system, is not only a public vehicles, but also a large underground museum. All the historical relics which were digging and found during the construction period are on display in every station.Greece Athens Metro is the first public Escalators manufactured and shipped to European, total23units for Greece 2004 Olympic.27Italy Line Allfna Infeniore Metro is Xizi Otis first XOPE heavy duty escalators manufactured and shipped to European, total 27units, it added XOEC experience on producing oversea XOPE products.48Design , manufacture , supply , testing and comissioning & maintenance of 46 nos Elevators for Mumbai Metro project . The tender has been floated by M/s Metro One Private Limited who are developing the MRTS in Mumbai . Mumbai Metro One Private Limited(MMOPL), a special purpose vehicle has been incorporated by Reliance Energy Limited ( REL ) in consortium with Veolia Transport, France & MMRDA ( govt body ) for the implementation of the Versova - Andheri - Ghatkopar (VAG) corridor Metro Project in Mumbai has been awarded a 35 years concession on BOOT basis for the proposed Versova-Andheri-Ghatkopar Elevated MRTS in Mumbai under a Public Private Partnership frame work .69Located in Dubai, UAE, 'City Center ' mega mall isa great shopping mall in Dubai. XOEC will supply34 units XO-508, 29 units of FOVF, 4 units of XOP and 2 units of GeN2.81Dreams Mall is located atBhandup (West), Mumbai, including 20units OH5000 Elevators for Dreams Residential - Bldg No2 & 4 ; 6 units OH5000 for Dreams - The Mall; 4units OH5000 Elevators for Dheeraj Solitaire; 23 units OH5000 for Dreams Residential - Bldg No 1; 28units Star escalators for Dreams - The Mall.56This is a major project in Pune, about 160 km from Mumbai,Total no. of elevators required are 84, out of which 56 units OH5000 is from XOEC & 12 units from CTOEC. Its cab is special design as customer's expection, with Ti Ti Black stainless steel finish.This is a benchmarking project with our OH5000 sales in India market.140Jakarta City Center is a shopping center in Jakarta which provides large collections of crafts and batik from around Indonesia. The simple ideas of this shopping center is connecting the batik lovers and the makers.53Metromall, promoted as the future of shopping in Panama, is located near Tocumen International Airport and will be opened this year before the holiday season begins. 35 units of XO-508, 9OH5000, 8 FOVF and 1 GeN2 are supplied by XOEC in this group of malls.36One of the biggest complex mall in Singapore, 30 STAR and 6 XOP from XOEC included.44Mall of the Emirates, the ultimate leisure, entertainment and shopping resort opened on 2005. Strategically located in the heart of what is now deemed ‘New Dubai’, this 223,000 square meter centre offers a full range of shopping, leisure, and entertainment.There are 49 elevators in Mall of the Emirates: 34 FOVF, 5 GeN2, and 5 units of XO21VF.34Shopping Vila Olimpia is the first significant project from Brazil Otis. It consists of 26 unnits of XO-508 and 8 units of OH5000 panoramic ones.As they are running in the shopping mall, thisproject will be a showcase in Brazil.30"The saturation of buildings in the area 14, gives people another option of apartments in an area near the city, more secluded enough to have privacy." It is a concept that includes two luxury apartment towers large class of 1 to 4 bedrooms. 21 GeN2 and 2 OH5000 from XOEC are installed in this building.30This prairie area will consist of four buildings at the front of the shopping center La Pradera in area 10, which will, one with 18 levels, twolevels of 17 and the last of 16 levels, which will connect to the lobby of it, which will have commercial premises to the needs of people.24OH5000 and 6 XO-508 from XOEC are installed in the building32XOEC supplied 24 units of OH5000 and 8 units of GeN2 for Malaysia P.J Trade Centre, Kuala Lumpur project.86XOEC took the order of Malaysia Solaris Dutamas in 2007. In this order, XOEC will supply 84 units of XO-508 and 2 units of XOP for our customers.221Great order of 211 units ele.&esc. won by Xizi Otis in UAE Yas Island. This order contain 132 units of GeN2 and 89 escalators, and this makes it the biggest GeN2 project of Xizi Otis in overseas market. Yas Island locates in Abu Dhabi, the capital of UAE, and it covers an area of 2500,000 square metres. F1, shopping mall, hotel, Warner Bros theme park and even Ferrari theme park will be part of Yas Island.52Xizi Otis provided 52 customized escalators and pavement products for Beijing Subway Line 5, making great contribution to Beijing Olympic construction and Beijing city transportation, also proving again the customers’ approval to the products and services of Xizi Otis in major public establishment construction.73Beijing Subway Daxing Line is the main transportation artery connecting Beijing Daxing New City and downtown Beijing. Xizi Otis won the bid for all 73 escalators of Daxing Line, among which, 11 stations will choose the heavy public transit escalators.111Xizi Otis is the sole supplier of all the elevators and escalators of Beijing South Railway Station, which is now the largest railway station in Asia. We have provided altogether 111 electric escalator products to the new South Railway Station, among which, there are 36 GeN2 machine-room-less elevators (including 22 transparent panoramic elevators), and 75 public transit escalators.6In July 2007, Xizi Otis won the bid for another major project of 2008 Olympic Games - expansion project of Beijing Capital International Airport. With its outstanding product and technical strength, Xizi Otis provided all the escalator equipments for the newly built T3C building of the third terminal building.22Beijing West Railway Station is the largest modernized railway station in Asia, with the title of the “Largest Station in Asia”, to whom Xizi Otis has provided 22 automatic escalators.8In March 2006, Xizi Otis won the bid for 8 of the elevator projects of the reorganization and expansion project of National Olympic Sports Center Gymnasium, supporting the construction of Beijing Olympic venue with real actions.193Shanghai track traffic Line 11 is currently the longest subway line in China, as we as the fastest subway express in Shanghai; from east to west, Line 2 runs through the city center, connecting Shanghai Pudong International Airport and Hongqiao Airport; Xizi Otis provided 193 XO21NP automatic escalators to this project.264Hangzhou Subway Line 1 is the first subway line of Hangzhou. As the sole supplier of all the escalator products of the project, Xizi Otis provided 264 XO21NP automatic escalators, whichall adopted the frequency-control and energy-saving device. Among them, 150 are outdoor automatic escalators.125Tianjin Station communication hub project is currently the largest communication hub project under construction that integrates common railway, express railway, subway, intercity bus, city bus and taxi. Xizi Otis provided 110 automatic escalators and 15 panoramic elevators for the Tianjin Station expansion project.10Shenyang Olympic Sports Center is the football field for football matches of the 2008 Beijing Olympic Games. The center chose 10 green energy-saving elevators provided by Xizi Otis.17Hangzhou Grand Theatre is one of the best grand theatres in China. Xizi Otis provided 17 XO21VF passenger elevators for the project.4Located at the core area of the Hangzhou Qianjiang New City, Hangzhou Civic Center - Cultural Wave City is a large underground shopping mall. The mall adopts the products of Xizi Otis, including 2 XOP automatic pavements with the horizontal span of 84 meters, and 2 sectional snake-like XO21NP automatic escalators.36The Hangzhou Civic Center - Administration Building & Business Building is the core building of Qianjiang New City, the future city center of Hangzhou with the central business area function. The project chose 36 imported E411 high-speed commercial elevators of Xizi Otis.2The Yangtze Gorges Hydro Junction Project is the largest hydraulic protection project in China, as well as in the world. The two XO-PE escalators provided by Xizi Otis are the outdoor escalators with the longest span and highest lifting speed in China.136Beijing Subway Line 10 is the major auxiliary key project that directly served the 2008 Beijing Olympic Games. The project chose 136 automatic escalators from Xizi Otis.。
Genie2000培训教程LYNX1111
安装Genie 2000 v3.1（8）
出现安装信息(Setup Option)对话框，若确认无误，然 后点击Next。若要修改设置，点击Back返回修改。
11
安装Genie 2000 v3.1（9）
选择安装模式。建议选择标准安装（Standard），然 后点击Next。
12
安装Genie 2000 v3.1（10）
选择Install Genie2000 S500/S502 Basic Spectroscopy。 然后点击Next。
8
安装Genie 2000 v3.1（6）
选择是否安装说明文档，然后点击Next。
9
安装Genie 2000 v3.1（7）
选择是否安装Acrobat Reader，然后点击Next。
2
Genie 2000 软件安装
(Software Installation) Part 1, Genie 2000 Series
3
安装Genie 2000 v3.1（1）
将安装光盘放入光驱，自动弹出软件安装对话框。选 择Install Genie 2000。
4
安装Genie 2000 v3.1（2）
28
加载LYNX （1）
选择Database的下拉菜单的Load to
29
加载LYNX （2）
加亮选择编辑定义的LYNX，点击Load和Done, LYNX加 载完毕。
30
调用LYNX （1）
启动谱获取和分析(Gamma Acquisition & Analysis)程 序
31
调用LYNX （2）
20
编辑定义LYNX （2）
选择通讯接口（例如：Network MCAs)
genesis2000培训资料7
1、扩大机制的原理是，标识用于 优化的焊盘并尝试将他们扩大到 所指定的优化值，如果尝试此操 作时发现违规，算法会撤消操作 而只扩大道到最小的值。如果仍 有违规，则完全不操作。
设定最优化开窗的尺寸
设定最小的铜箔的连接宽 度
已经将开窗优化到所需要 的值
因间距等的限制，过孔周 围的开窗不能达到最优化 的模式。但是进行了优化
已经检测到开窗但是不能进 行任何优化
网络太大，不能进行优化
添加泪滴
before
Triangular 三角形状的
Straight 直的方向
NFP和过孔 的铜皮之间的间 距的要求尺寸
PTH开窗最小的尺寸和最优化 的尺寸
PTH最小的焊环尺寸和优化尺 寸
PTH的thernal pad 的最小间隙 和必须保留的被铜箔覆盖的最 小范围。
PTH与周围铜箔之间的间距
NPTH的最小开窗尺寸和最优 化开窗尺寸
设置保证散热焊盘中的钻 孔与电路的连通性， thermal tie中必须保留被 铜箔覆盖的最小百分比。
鱼片形状的
圆形的
椭圆形的
加泪滴针对于钻孔的pad ,以及 未钻孔的pad
要添加的泪滴的最大的焊环尺 寸
钻孔尺寸最小到最大是多少
补偿完后泪滴到另一个网络 铜箔之间的间距和到其他网 络间钻孔的间距
是否删除旧的：带有.tear_drop属性 Yes :删除 No:保留
Skip:跳过已加过的
工作模式：
PTH的airgap太小而又无法进 行扩大
西子奥的斯AMCB2板说明及井道自己学习方法
西⼦奥的斯AMCB2板说明及井道⾃⼰学习⽅法通⼒3000井道⾃学习步骤西⼦奥的斯OH6000主板与接⼝板端⼦介绍西⼦奥的斯OH6000系列变频器驱动故障码分析西⼦奥的斯OH6000系列主板故障码分析西⼦奥的斯OH6000电器原理图纸带注解西⼦奥的斯DO3000门机调试培训(上)西⼦奥的斯DO3000门机调试培训(中)西⼦奥的斯DO3000门机调试培训(下)西⼦奥的斯DO3000S门机使⽤说明奥的斯上⾏超速保护测试操作奥的斯⽆机房ACD2/3-MRL临时屏蔽抱闸检测开关操作说明奥的斯蓝⽛APP⼿机服务器操作说明奥的斯服务层设置楼层显⽰设置外呼地址设置奥的斯服务使⽤快捷键参数菜单中⽂说明奥的斯钢带检测常见故障处理及调试学习奥的斯⽆机房SPBCII板常⽤功能按钮介绍奥的斯ACD系列变频器通⽤最新故障码含新国标（上）奥的斯ACD系列变频器通⽤最新故障码含新国标（中）奥的斯ACD系列变频器通⽤最新故障码含新国标（下）奥的斯ACD系列通⽤最新故障码(中)奥的斯ACD系列通⽤最新故障码(下)奥的斯ACD系列通⽤最新故障码(上)⼀、AMCB2板硬件说明⼆、LCD显⽰器1、主要显⽰有3种界⾯的显⽰：监控界⾯、菜单界⾯和故障界⾯仅当有故障时显⽰。
三、监控界⾯1、监控界⾯显⽰轿厢当前所在楼层及电梯当前运⾏的速度。
四、菜单界⾯1、菜单界⾯主要有两组菜单的显⽰：F菜单为功能参数，⽤于设置电梯运⾏的基本参数如：电梯的曲线参数、合同速度、检修速度等，详见后⾯参数表。
2、P菜单为位置参数，记录电梯井道⾃学习的参数如：各层楼的位置、上下强迫减速的位置、插板的长度、轿顶两个门区位置传感器的距离等。
五、故障界⾯故障界⾯只有在 AMCB2板检测到故障时才会⾃动显⽰当前故障，故障信息包括编码器故障，变频器故障，接触器反馈故障和制动器反馈故障等。
六、操作按钮操作按钮主要⽤于参数的设置和浏览，从左到右依次如下：Esc 退⾄上级窗⼝、取消某项操作。
Genesis培训教程-result_viewer结果显示
THANK！
圖形統計表 7
虛線框為圖形區範圍
可設定限制查看的區域 1. 拖曳 <M1> 框選 2. <Shift><M1> 加選 3. <M2><M2> 取消
圖形區的範圍放到分佈圖 分佈圖上框選的區域放到圖形區
結果報表 1
結果報表 2
Report: 結果報表
Attributes: 結果屬性報表
All: 結果報表及結 果屬性報表
結果顯示器視窗 1
顯示功能畫面或清單 (Checklist) 種類的過濾器 種類
顯示目前選擇種類的詳細內容
搜尋 選擇測量的嚴重等級
目前選擇種類的 ERF 內容
結果顯示器視窗 2
Replace layers: 切換顯示的層別 Keep layers: 保留之前顯示的層別
顯示嚴重度 淡藍: 全部 綠: 低 黃: 中 紅: 高
參考量測主要作用於從未來 的動作中清除“假缺點”. 當設為參考之後, 系統將會 忽略這個量測的發生.
統計面板
配合統計圖 設定為參考
刪除
配合分佈圖 設定為參考
刪除
圖形統計表 1
統計圖區 解析度
分佈圖區
統計面板 Count: 數量 Average: 平均值 Sum: 合計
對 lines 較有意義 Min: 最小值 Max: 最大值
Auto Zoom 自動調整倍率及移動視窗
Pan only 僅移動視窗
Popview 視窗放大
None 都不改變
Icon 的意義
刪除目前顯示的量測 設定目前顯示成為參考 回復上一次動作 (DEL/REF)
圖形統計表
結果屬性 所有的參考變成刪除 快照
OTIS ACD3-MRL系统电梯
M-3-4
- 17 -
主机类型设置方法 Gen2-V内采 用的GGP主
西班牙产Gen2 2.6T替代原
机
2.5T
载重(kg)
速度(m/s) 参数
Motor Type Rated rpm Number of Poles Rated Trq Rated Trq I Ld Lq R T/A Slope T/A Offset Kt Slope Id Saturation Iq Saturation Ld Slope Lq Slope Lq0 Lq1 Lq2 Ld0 Rated Motor Mag err thr LRT DC Level PU LRT mot err eDeg Fld Wkn Lvl Fld Wkn BW
14 160 19.40 14.00 17.00
2 43.80 13.50
0 9.00 9.00 0.27 0.21 17.00
0 0 5 649 40
14 300 16.00 52.00 90.00 0.8 37.40 4.80
0 3.00 16.00 0.90 0.50 75.00
0 0 60 330 20
1150 OVFR2B-403 OVFR2B-403 OVFR2B-403 OVFR2B-403
1275 OVFR2B-403 OVFR2B-404 OVFR2B-404 OVFR2B-404
1350 OVFR2B-403 OVFR2B-404 OVFR2B-404 OVFR2B-404
1600 OVFR2B-403 OVFR2B-404 OVFR2B-404 OVFR2B-404
1600 OVFR2B-403 OVFR2B-404 OVFR2B-404 OVFR2B-404
西子OH-5100系统GECB-MCBC-FUJI调试中文培训资料
Speed Fbk
Encoder Brake
1LV, 2LV UIS, DIS
Motor
Group Fixtures
Car Fixtures
CAN RSL
Hall Fixtures
Transition
Load Fixtures
离散信号
DO/DC
Door Operator
RS 422
OTIS SVT
MCBC Board (1.0m/s~2.5m/s)
in service 第22页
主机参数及速度设定
9主机铭牌标记的额定转速（或额定速度）与合同值一致时，按照铭牌值设置。 9主机铭牌标记的额定转速（或额定速度）与合同值不一致时，根据下表参考设置。
富士变 频器
MCBC
1.0m/s F03 168 r/min F04 168 r/min
C32 57.14%
运行状态 (速度对比、 位置对比、 当前运行状态)
故障代码
in service 第11页
接口板MCBC
¾ 参数说明
其参数与AMCB2（v3.5）参数设置及功能类似。 特殊说明如下：
<M-1-1>
F0 Function Menu
F8 Landings in 1LS F13 Bottom Landing
系统调试主要步骤
主机磁极定位 检修运行
井道自学习 DCS操作 正常运行
in service 第20页
主机磁极定位
¾服务器操作
将 将EERROO开 开关 关置 置于 于EERROO状 状态 态 动 动力 力线 线、 、编 编码 码器 器线 线正 正确 确连 连接 接
接 接地 地线 线连 连接 接良 良好 好
GENESIS2000培训教材
GENESIS 功能操作规范料号内容User Name:genesis Password:genesis点2下(双击)可开启点2下可开启慧通C AM 培训6-2-3 Matrix矩阵6-2-4 图形画面6-3.Graphic操作界面说明6-3-1层次列表区显示区6-3-3讯息栏切换为工作层 设定为Snap 参考取消所有的选取层 更改显示颜色 Aperture 的统计复制(可从其它料号copy 过来) Merge将Merge 分离 正片输出 填满Profile层次间的对位Alignment Step 矩阵 量测铜面积 属性 加批注概略位置实际坐标总共选择到对象的数量通C AM 培训6-3-4坐标输入区训6-3-5工具区6-3-5-1工具区-显示功能（快捷键）慧通C A M 培训6-3-5-2工具区-依筛选器选取线PadSurface弧文字正片负片图的pitchpitch零点的零点通CA6-3-5-4工具区- Display Control6-3.图形画面按右键M3更改显示颜色 Aperture 的统计复制可从其它料号copyMerge将Merge 分离正片输出 填满Profile层次间的对位AlignmentStep 矩阵 量测铜面积属性 加批注将选取区切出 将整层重新读入整层清空 图形比对慧通C AM 培训6-4-1图形画面按右键M3 > Features Histogram正负片要不要相反通C AM 培训6-4-4图形画面按右键M3 >Unmerge （分离Merge ）层次分离之后的层名会加上 最多分出几层慧通C AM 培训6-4-7图形画面按右键M3 >Register (层次对位)参考层 误差度 要拉那几层报告结果慧通C AM 培训6-4-11图形画面按右键M3 > Copper/exposed Area 量测露出的面积Mark 绿油层慧通C AM 培训6-5.Graphic Menu图形画面主选单说明6-5-1File>Locks>Lock status (显示料号开启的状况)训培MAC通6-5-4Edit>Copy> Other layer (将选取的对象复制至其它层)精准度通C AM 培训6-5-9Edit>Resize> Polyline (Polyline 的加大或缩小). Edit>Connections (连结两对象)+为加大 -为缩小慧通C AM 培训6-5-13 Edit>Buffer>View (看Buffer 内的东西)6-5-15 Edit>Reshape>Break to Island/Hole (将Surface 内的Island/Hole 分离出来慧通C AM 培训6-5-18 Edit>Reshape> Contour to pad(将Contour 转为pad 形式)6-5-19 Edit>Reshape> Contourize (将选取的变成一笔数据)慧通C AM 培训6-5-22 Edit>Reshape>Clean Surfaces（转为光栅文件）训培MAC通慧6-5-26 Edit>Create>Step (建立Setp)通C AM 培训6-5-29 Edit>Change>Pad to Slots处理方式加上重新设定慧通C AM 培训6-5-32 Edit>Attributes>Delete (删除属性)6-5-33 Action>Checklist>Open (开启Checklist)慧通C AM 培训6-5-34 Action>Netlist Analyzer (网络分析)输入料号输入Step选择Current目前的网络网络络结构Graphic更新参考层较层结果短路结果断路Netlist compare通CAM培训6-5-35 Action>Output (输出)慧通C AM 培训6-5-37 Action>Select Drawn训培MAC通慧6-5-40 Action>Notes (添加批注)6-5-42 Option>Selection (选择的设定)慧通C AM 培训6-5-43 Option>Attribute(属性)6-5-44 Option>Graphic Control慧通C AM 培训6-5-45 Option>Snap6-5-46 Option>Measure (量测)慧通C AM 培训6-5-47 Option>Fill Parameters (填满的参数)训培MAC通6-5-50 Analysis>Fabrication>Drill Checks (钻孔分析)分析之层次 背景参数选择距Rout 边 测试项目 孔径大小重复孔等未钻孔多孔短路 太近检查多孔的重复孔 相互导通各类孔的统计 少孔 多孔孔和孔太近 孔和孔碰到慧通C AM 培训6-5-51 Analysis>Fabrication>Signal Layer Checks (线路层分析)间距间距钻孔到铜面Rout到铜面细丝和孔有和Rout大小、内铜Size及的线路要不使SMD的间距Via hole的间距Pth到Pth的间距Pad到Pad的间距Pad到线路的间距线到线的间距文字到文字的间距同网络的间距绿绿油的部份慧通CAM培训PTH 到铜面PTH 的环Via hole 的环 Via hole 到铜 Via 少pad PTH 孔少padPAD线的SIZE 用来削间距的线的SIZE文字 线的缺角 弧 细丝未接PAD 的线路慧通C AM 培训6-5-52 Analysis>Fabrication>Power/Gound Checks (P/G 的检查)钻孔到铜面 最小细丝 Rout 到铜面无功能独立点的间距用加NPTH 到铜面 PTH 的环 Via hole 的环 PTH 到铜面 Via hole 到铜面 Pth 里有小pad Via hole 里有小padPTH 的对准细丝慧通C AM 培训6-5-53 Analysis>Fabrication>Solder Mask ChecksClearance 环 Rout 到绿油 最小间距绿油覆盖 细丝PTH 孔的绿油open 环 NPTH 孔的绿油open 环 NPTH 踫到绿油SMD Pad 绿油open 的环 Pad 绿油open 的环Pth 上Pad 的绿油open 环 NPth 上Pad 的绿油open 环 Via hole 上Pad 的绿油open 环 未钻孔Pad 的绿油open 环未钻孔Pad (绿油open 比Pad 小) SMD Pad (绿油open 比SMD 小) 绿油open 比PTH PAD 小 绿油open 比NPTH PAD 小 绿油open 比Via PAD 小 绿油覆盖细丝SMD 被绿油覆盖,没有CLS未钻孔PAD 被绿油覆盖,没有CLS NPTH 被绿油覆盖,没有CLS PTH 被绿油覆盖,没有CLS Via 被绿油覆盖,没有CLS 绿油Pad 到Pad 间距印印印字距绿油的CLS 印字距SMD 的CLS 印字距PTH PAD 的CLS印字距未钻孔PAD 的CLS 印字距NPTH 孔的CLS 印字距PTH 孔的CLS印字距Rout 的CLS 印字线宽慧通C A M 培训6-5-55 Analysis>Fabrication>Profile Checks6-5-56 Analysis>Fabrication>Drill Summary (钻孔的统计)6-5-57 Analysis>Fabrication>Board-Drill-Checks慧通C AM 培训6-5-58 Analysis>Fabrication>SMD Summary (SMD 的统计)最小的size列 组Pitch 不等距6-5-59 Analysis>Fabrication>Pads for Drills (pad 或A/R 的统计6-5-60 Analysis>Surface Analyzer (Surface 的分析)6-5-61 Analysis>Signal Integrity>Electric Spacing Check (间距的分析)慧通C A M 培训6-5-62 DFM>Cleanup>Legend Detection (文字的侦测)训培MAC通6-5-64 DFM>Cleanup>Construct Pads(Ref.) (手动换pad)误差值 一定要同角度 0,90,180,270度任意角度有钻孔有有钻孔有是不是要删定的通C AM 培训6-5-66 DFM>Cleanup>Line Unification (合并线路)执行前 执行后线宽线宽重慧通C AM 培训6-5-68 DFM>Redundancy Cleanup>NFP Removal (无功能独立Pad删除)会被其它的对象覆盖的独立点独立点重复padPad会被孔钻掉Pad其它东西覆盖掉要不要删无通CAM培训6-5-69 DFM>Redundancy Cleanup>Draw to Outline (画外框线)在6-5-71 DFM>Repair>Pinhole Elimination (铜面上小白点或底板上的细丝删除)例如:在此范围内的才删底板通C AM 培训6-5-73 DFM>Sliver>Sliver&Acute Angles (补细丝及转角丝)多少条以下要补角度补上要重叠多少P/G 的间距 P/G 通C A M 培训6-5-76 DFM>Sliver>Tangency EliminationPTH 孔小Via 间距 缩小线路 缩小线路 钻 通C AM 培训环不足未达最小要求环不足未达最佳化要求没用暂时不用已做处理达间距要求间距不足,未达最佳化要求间距不足,未达最小要求Reshape 钻孔到铜面已修改达要求6-5-78 DFM>Optimization>Solder Mask Opt.绿油Open覆盖 间距使用原稿依外层产生用削的所有的Open 都够了Open 或覆盖都达不到最小要求间距都够了牺牲覆盖的最佳化要求,给open 牺牲Open 的最佳化要求,给覆盖因为距离太近,削间距时会踫到其它的因系统错误,无法产生绿油open做到间距但open 不足慧通C AM 培训原稿Open 比依外层做开窗大很多,保留原稿 一部份间距,一部份覆盖训。