0603红光规格书
贴片电阻规格书
5.1 VOLTAGE RATING: RESISTORS SHALL HAVE A RATED DIRECT-CURRENT (DC) CONTINUOUS WORKING VOLTAGE OR AN APPROXIMATE SINE-WAVE ROOT-MEAN-SQUARE (RMS) ALTERNATING-CURRENT (AC) CONTINUOUS WORKING VOLTAGE AT COMMERCIAL-LINE FREQUENCY AND WAVEFORM CORRESPONDING TO THE POWER RATING, AS DETERMINED FROM THE FOLLOWING FORMULA:
34
392
58
698
82
127
11
226
35
402
59
715
83
130
12
232
36
412
60
732
84
133
13
237
37
422
61
750
85
137
14
243
38
432
62
768
86
140
15
249
39
442
63
787
87
143
16
255
40
45364ຫໍສະໝຸດ 80688147
17
261
41
464
65
825
EXAMPLE:
33000 → 33KΩ
(3) ±2%、±5%TOLERANCE: BELOW 10Ω SHOW AS FOLLOWING, READ ALPHABET”R” AS DECIMAL POINT. EXAMPLE:
红光发光二极管数据手册说明书
Description
The Bright Red source color devices are made with Gallium Phosphide Red Light Emitting Diode.
Package Dimensions
Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the lead emerge package. 4. Specifications are subject to change without notice.
Min.
Typ.
0.4
1
View in g Angle
2θ1/2
110°
Electrical / Optical Characteristics at TA=25°C
Symbol
Parameter
Device
λpeak
Peak Wavelength Bright Red
λD
Dominate Wavelength Bright Red
REV NO: V.2 CHECKED: Allen Liu
DATE: NOV/05/2002 DRAWN: Y.H.LI
PAGE: 2 OF 3
Bright Red
L-1553HDT
SPEC NO: DSAA7674 APPROVED: Allen Liu
Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base.
LESD11D3.3CT5G DFN0603-D 规格书LRC 推荐
ESD PROTECTION DIODEDiscriptionis designed to protect voltage sensitive components from ESD. Excellent clamping capability, low leakage, and fast response time Because of its small size, it is suited for use in cellular phones, MP3 players, digital cameras and many other portable applications where board space is at a premium.Applicationsl Cellular phones audio l MP3 players l Digital camerasl Portable applicationss l mobile telephoneFeatureslSmall Body Outline Dimensions: 0.61 mm x 0.31 mm l Low Body Height: 0.28 mm l Low Leakage l Response Time is Typically < 1 ns l ESD Rating of Class 3 (> 16 kV) per Human Bod yModel l IEC61000−4−2 Level 4 ESD Protection l These are Pb −Free Devices MAXIMUM RATINGSRatingSymbol Value Unit IEC 61000-4-2 (ESD) ±25kV ESD VoltagePer Human Body Model16 kVT otal Power Dissipation on FR-5 Board (Note 1) @ T A =25℃PD 200mW Junction and Storage T emperature RangeTJ,TSTG-55 to 150 ℃ Lead Solder T emperature – Maximum (10 Second Duration)TL 260℃Stresses exceeding Maximum Ratings may damage the device. Maximum Rating are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. 1. FR-5 = 1.0*0.75*0.62 in.LESD11D3.3CT5G We declare that the material of product compliance with RoHS requirements.lThe LESD11D3.3CT5G dischargeContact discharge±20kV AirOrdering informationLESD11D3.3CT5G12,make these parts ideal for ESD protection on designs where board space is at a premium.12DFN0603-DELECTRICAL CHARACTERISTICSOther voltage available upon request.2. V BR is measured with a pulse test current IT at an ambient temperature of 25℃3. Surge current waveform per Figure 1.ELECTRICAL CHARACTERISTICS(T A = 25°C unless otherwise noted)Symbol ParameterI PP Maximum Reverse Peak Pulse CurrentV C Clamping Voltage @ I PPV RWM Working Peak Reverse VoltageI R Maximum Reverse Leakage Current @ V RWMV BR Breakdown Voltage @ I TI T Test CurrentP pk Peak Power DissipationC Capacitance @ V R = 0 and f = 1.0 MHzDeviceV BR (V) @ I T(Note 2)I T C (pF)V C (V)@ I PP = 1 A(Note 3)Max Min mA Max LESD11D3.3CT5G 3.3 5.0 1.0167V RWM(V)I R(m A)@ V RWMMax0.1V C (V)@MAX I PP(Note 3)Max10I PP(A)Max6(Note 3)P PK(W)Max60(Note 3)MaxFig1. Pulse Waveform Fig2.Power Derating CurveMax6.5Fig3.Positive 8 kV Contact per IEC61000.4.2Fig4.Negative 8 kV Contact per IEC61000.4.2Fig5.TLP MeasurementOUTLINE AND DIMENSIONSSOLDERING FOOTPRINT。
LESD11LL5.0CT5G DFN0603-D 规格书LRC 推荐
ESD PROTECTION DIODEDiscriptionis designed to protect voltage sensitive components from ESD. Excellent clamping capability, low leakage, and fast response time Because of its small size, it is suited for use in cellular phones, MP3 players, digital cameras and many other portable applications where board space is at a premium.Applicationsl Cellular phones audio l MP3 players l Digital camerasl Portable applicationss l mobile telephoneFeatureslSmall Body Outline Dimensions: 0.61 mm x 0.31 mm l Low Body Height: 0.28 mm l Low Leakage l Response Time is Typically < 1 ns l ESD Rating of Class 3 (> 16 kV) per Human Bod yModel l IEC61000−4−2 Level 4 ESD Protection l These are Pb −Free Devices MAXIMUM RATINGSRatingSymbol Value Unit IEC 61000-4-2 (ESD) ±25kVESD VoltagePer Human Body Model16 kVT otal Power Dissipation on FR-5 Board (Note 1) @ T A =25℃PD 200mW Junction and Storage T emperature RangeTJ,TSTG-55 to 150 ℃ Lead Solder T emperature – Maximum (10 Second Duration)TL 260℃Stresses exceeding Maximum Ratings may damage the device. Maximum Rating are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. 1. FR-5 = 1.0*0.75*0.62 in.LESD11LL5.0CT5G We declare that the material of product compliance with RoHS requirements.lThe LESD11LL5.0CT5G dischargeContact discharge±20kV AirOrdering informationLESD11LL5.0CT5G12,make these parts ideal for ESD protection on designs where board space is at a premium.12DFN0603-D=Specific Device Code M = Month CodeQELECTRICAL CHARACTERISTICSOther voltage available upon request.2. V BR is measured with a pulse test current IT at an ambient temperature of 25℃3. Surge current waveform per Figure 1.LESD11LL5.0CT5GELECTRICAL CHARACTERISTICS(T A = 25°C unless otherwise noted)Symbol ParameterI PP Maximum Reverse Peak Pulse Current V C Clamping Voltage @ I PP V RWMWorking Peak Reverse VoltageI R Maximum Reverse Leakage Current @ V RWM V BR Breakdown Voltage @ I T I T Test CurrentP pk Peak Power DissipationCCapacitance @ V R = 0 and f = 1.0 MHzFig1. Pulse Waveform Fig2.Power Derating CurveV RWM (V)I R (μA) @ V RWM V BR (V) @ I T (Note 1)I T （mA ）I PP (A) V C (V) @ Max I PP P PK (W) (8*20 μs) C (pF)DeviceMaxMax MinMaxMax Max Typ LESD11LL5.0CT5G5.00.561.0 420800.18Max 8.80.24Min Max0.3LESHAN RADIO COMPANY, LTD.LESD11LL5.0CT5GFig3. ESD Clamping Voltage Screenshot Positive 8 kV Contact per IEC61000-4-2Fig4. ESD Clamping Voltage Screenshot Negative 8 kV Contact per IEC61000-4-2Fig5.TLP MeasurementLESHAN RADIO COMPANY, LTD.LESD11LL5.0CT5G OUTLINE AND DIMENSIONSSOLDERING FOOTPRINT。
KRVV0603G5R0NXT压敏电阻规格书
SMD multilayer transient voltage suppressors, standard series
Series/Type: Date: November 2014
1 . Standard series
3 . Electrical specifications and ordering codes
Type：0402～0805
□ Leadless，size 0402～0805 □ Multilayer ceramic construction
□ Wide operating temperature ：﹣55℃ to﹢125℃
VB(V)
Clamping voltage 8/20 μs 1A
Transient energy 10/100μs
Peak current 8/20μs
Capacitance @ 1kHz
Vc(V)
ET(J)
Ip(A)
C(pF)
KRVV0402G35R0NXT
2.5 3.3
5 ±10%
10
0.02
10
1.00
200
1500
KRVV1210G270NXT
17
22
27 ±10%
58
1.00
200
1500
KRVV1210G330NXT
20
25
33 ±10%
65
1.00
200
1400
KRVV1210G390NXT
25
30
39 ±10%
72
1.00
200
国巨电容规格书
CC0603 1.6±0.10 0.8±0.10 0.70 0.90 0.20 0.60 0.40
CC0805 2.0±0.10 1.25±0.10 0.50 1.35 0.25 0.75 0.55
CC1206 3.2±0.15 1.6±0.15 0.50 1.35 0.25 0.75 2.5±0.20 0.50 1.80 0.25 0.75 1.40
IR: 1000MΩ or
Ur ≥1kV)
RxC ≥ 25s
IR: 1000MΩ or
Precondition for Class 2 Ur ≤ IR: 2500MΩ or
Whichever is less
RxC ≥ 25s
16V
RxC ≥ 25s
Whichever is less
whichever is less
Tanδ≤ 5% or ≤ 7%, 25V/50V depending on capacitance value
Tan δ ≤ 4%, 50V Tan δ ≤ 6%, 25V
Tanδ≤ 9% or ≤12.5%, Tan δ ≤ 9%, 16V 16V depending on capacitance value
Example:
CC 0805 K K X7R 9 B N 104
Code 1~2 Series Name CC = Multi-layer
chip cap. CA = Cap. Array CL=Low. Inductance
Code 3~6
Size Code
inches (mm)
0402 (1005)
原创力文档是网络服务平台方若您的权利被侵害侵权客服qq
YAGEO CORPORATION
贴片发光二极管 0603白光 1608 SMD LED 灯珠中英文参数资料
第4页共7页
SMD LED
4. 可靠性 RELIABILITY
(1)测试项目及结果 Test Items and Results
序号
试验项目
参考标准
试验条件
持续时间
取样数
接收水准（不 合格数量/抽 样总数）
-40 ℃ ～ 25 ℃
JEITA
～ 100 ℃ ～ 25
1
温度循环
(3) 防潮包装 Moisture Proof Package 使用防潮包装 It is recommended that moisture proof package be used
(4) 储藏 Storage 打开包装袋之前,LED 在温度为 30°C 或更低湿度 70%RH 以下,可保存一年.
7
ED-4701 300 5℃,5 秒 使用
10
0/10
焊）
秒
303
助焊剂
Tsol=260℃,10
JEITA
耐焊性(回流
秒 预处理：35 焊接二次，每
8
ED-4701 300
10
0/10
焊）
℃ 95%RH 96 次 10 秒
301
小时
第5页共7页
SMD LED
5. 注意事项 Cautions
符号 Symbol
IF IFP VR PD Topr Tstg
焊接温度Soldering Temperature
Tsld
1/10 周期, 0.1 msec 脉宽 IFP Conditions : 1/10 Duty Cycle, 0.1 msec Pulse Width.
最大额定值 Absolute Maximum Rating
贴片发光二极管 0603蓝光 1608 SMD LED 灯珠中英文参数资料
230°C Max. 260°C Max.
焊接时间 Soldering time 10 sec. Max. 10 sec. Max.
条件 Condition
参考下图
参考下图
有铅回焊（Lead Solder）
手工焊接 Hand Soldering
温度 Temperature
350°C Max.
焊接时间 Soldering time 3 sec. Max. (one time only)
编制 Prepared by
洸子其确认
CONFIRMATION
审核
核准
Checked by
Approved by
市场部 Market Dept.
确认 Confirmed by
客户确认
CUSTOMER CONFIRMATION
审核
核准
Checked by
Approved by
确认 Confirmed by
30 150 9 100
-40ºC To +85ºC -40ºC To +85ºC
ReflowSoldering:260ºC Hand Soldering : 350ºC
单位 Unit mA mA
V mW °C °C for 10sec. for 3sec.
(2) 样品光电参数 Initial Electrical/Optical Characteristics (TA=25±5ºC)
Keep away from water, moisture in order to protect the LEDs.
(6) 须采取适当防护措施,以防包装箱跌落或受到强力撞击造成对产品的损伤.
PBY060303T-330Y-N叠层片式铁氧体磁珠规格书
Dimensions in mm TYPE 060303 100505 160805 160808 201209 321611 ＊ A 0.2 ~ 0.3 0.4 0.7 ~ 0.8 0.7 ~ 0.8 1.0 ~ 1.2 2.0 B 0.75 ~ 1.05 1.2 ~ 1.4 1.8 ~ 2.0 1.8 ~ 2.0 2.6 ~ 4.0 4.2 ~ 5.2 C 0.3 0.5 0.6 ~ 0.8 0.6 ~ 0.8 1.0 ~ 1.2 1.2
FREQUENCY (MHz) RDC<0.09Ω Rated Current :1400mA
FREQUENCY (MHz) RDC<0.14Ω Rated Current :1400mA
PBY100505T-221Y-N
350 300
IMPEDANCE(Ω)
250 200 150 100 50 0 1 10
Note: When ordering, please specify tolerance code. Tolerance : Y=±25% Operating temperature range－55℃～125℃(Including self - temperature rise) Rate Current：Applied the current to coils, the temperature rise shall not be more than 30℃ Measure Equipment： Z：HP4291A RDC：HP4338B or CHEN HWA 502
Multilayer Ferrite Chip Beads
DCY offers a wide ran ge of multi-layered ferrite chip beads with various sizes, frequency characteristics, and impedance values for EMI solutions. These ferrite formulas are used to compose seven types of EMI suppression chip beads: SB, GB, PB, UPB, NB, HF, and VPB series.
0603蓝光 贴片LED
最小值 120
-----2.6 ---
代表值 --120 462 465 30 -----
最大值 150
------3.4 10
单位 mcd deg nm nm nm V uA
测试条件 IF = 20mA IF = 20mA IF = 20mA IF = 20mA IF=20mA IF=20mA
VR=5V
最大额定值
90 100
单位
mW mA
30
mA
5
V
-30°C ~ + 85°C
-40°C ~ + 90°C
回流焊 : 260°C ，10s 手动焊 : 300°C ，3s
五、光电参数 （Ta=25℃）：
参数 光强 半光强视角 峰值波长 主波长 半波宽 正向电压 反向电流
符号 IV 2θ1/2 λP λD Δλ VF IR
二、外形尺寸及建议焊盘尺寸：
1
2
C
A
推荐焊盘尺寸：
注: 1. 单位 : 毫米（mm）； 2. 公差 ：如无特别标注则为± 0.10 mm；
TEL:0755-36915152 FAX:0755-83388102
三. 建议焊接温度曲线： 有铅焊接:
Part No.: FHS-CL0603QB/XX
无铅焊接:
产品规格书
SPECIFICATION
产品名称 Product name： 0603蓝色贴片发光二极管
产品型号 Model：
FHS-CL0603QB/XX
文件编号 Document：
版 次 REV：
公司名称：
FHSELECTRON
客户承认（加盖公章）
制作
审核
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
承认书
Specificationforapproval
客户名称:
CUSTOMERNAME:
经办者:职称:
DIRECTOR:TITLE:
客户料号:
CUSTOMERPARTNO.:
品名:版本:
PARTNUMBER:XR-0603-URREVISION:YY-0A
发件日期:回文日期:
ISSUEDATE: RETURN DATE://
一、谨致执事者：兹提供敝公司产品之有关详细规格及图面数据，
敬请给予办理测试认定手续。
同时敬请送返一份附有贵公司签认之测试认定后之样品认定书。
Wearepleaseinsendingyouherewithourspecificationanddrawingsforyourapproval.
Pleasereturntousonecopy“ForApproval”withyourapprovedsignatures.
二、附件:
ACCESSORY：□样品□出货检验记录表□封装尺寸图□电气特性曲线
□内部线路图□焊性建议□PAD建议□
包装方式
三、客户意见栏
CUSTOMER’SPROPOSAL
□AGREE同意(请于认可栏中签名)
□DISAGREE不同意
REASON原因
:
客户认可签章
:
CUSTOMERSIGNATURE:
1、特性：
1.1封装尺寸：1.6*1.8*0.6mm
1.2
发光颜色：红色
1.3发光类型：单色型
1.4焊接方式：回流焊
1.5符合RoHS
标准
2
、成品外观尺寸
Page：1of7
香港瑞泰科技有限公司
XR-0603-UR
3、最大绝对标称值（环境温度=25℃）
参数缩写标称值单位
顺向电流IF20
mA
顺向峰值电流*1IFP100
mA
反向电压VR5V
焊接温度Tsol
回流焊：250°C，8sec.
手工焊：300°C，3sec.
使用温度Topr-40°C~+85
储存温度Tstg-40°C~+85
4、光电特性参数（环境温度=25°C）：
参数缩写最小值典型值最大值单位条件
顺向电压Vf1.92.2V
IF=20mA
亮度Iv100-120mcd
发光角度2Ө1/2-120-deg
反向电流IR--1µAVR=5V
波长WLD615620630nmIF=20mA
Page：2of7
香港瑞泰科技有限公司
XR-0603-UR
5、
光电参数曲线：
香港瑞泰科技有限公司
XR-0603-UR
包装数量：4000pcs/卷
6、包装方式：（单位：mm）
香港瑞泰科技有限公司
XR-0603-UR
Page：4of7
7、可靠度实验项目及条件：
Page：5of7
香港瑞泰科技有限公司
XR-0603-UR
8、使用注意事项：
8.1焊接
8.2清洗
8.3
灌封
Page：6of7
香港瑞泰科技有限公司
XR-0603-UR
8.4保存
8.5静电
8.6测试
8.7其他
XRXR--0603-UR
Page：7of7
香港瑞泰科技有限公司
XR-0603-UR