房地产行业流动负债比率平均水平77% 海建设高达95%

合集下载

Light Vision 清晰视界系列眼镜说明书

Light Vision 清晰视界系列眼镜说明书

Light Vision ™11356-00000-10Clear AF Lens, Grey Frame,Dual LED LightsSolus ™ 1000S1101SGAFClear Scotchgard ™ AF Lens,Blue/Black Frame S1102SGAFGrey Scotchgard ™ AF Lens,Blue/Black Frame S1103SGAFAmber Scotchgard ™ AF Lens,Blue/Black Frame S1107SGAF Indoor/Outdoor Grey Scotchgard ™ AF LensBlue/Black Frame S1101SGAF-KTClear Scotchgard ™ AF Lens,Blue/Black Frame, Foam Gasket and StrapS1102SGAF-KTGrey Scotchgard ™ AF Lens,Blue/Black Frame, Foam Gasket and StrapS1107SGAF-KTIndoor/Outdoor Grey Scotchgard ™AF Lens, Blue/Black Frame, Foam Gasket and StrapS1201SGAFClear Scotchgard ™ AF Lens,Green/Black FrameS1202SGAFGrey Scotchgard ™ AF Lens,Green/Black FrameS1203SGAFAmber Scotchgard ™ AF Lens,Green/Black FrameS1207SGAF Indoor/Outdoor Grey Scotchgard ™ AF LensGreen/Black Frame S1201SGAF-KTClear Scotchgard ™ AF Lens,Green/Black Frame, Foam Gasket and StrapS1202SGAF-KTGrey Scotchgard ™ AF Lens,Green/Black Frame, Foam Gasket and Strap S1201SGAF-SKTClear Scotchgard ™ AF Lens, Green/Black Frame, Foam Gasket and Strap (temples not included)S1202SGAF-SKTGrey Scotchgard ™ AF Lens, Green/Black Frame, Foam Gasket and Strap (temples not included)S1207SGAF-SKTIndoor/Outdoor Grey Scotchgard ™ AF Lens, Green/Black Frame, Foam Gasketand Strap (temples not included)Solus-foamSolus Accessories Foam GasketSolus-strapSolus Accessories StrapSmart Lens ™13407-00000-5Photochromic Lens, Black FramePREMIUM PROTECTIVE EYEWEARThese eye or face protection products help provide limited eye and face protection. Misuse or failure to follow warning and instruction may result in serious potential injury, including blindness or death. For proper use, selection, and applications against flying particles, optical radiation and/or splash, see supervisor, read User Instructions and warning on the package or call 3M PSD Technical Service in the USA at 1-800-243-4630. In Canada, call 1-800-267-4414.WARNING!3Personal Safety Division 3M CenterBuilding 235-2W-70St. Paul, MN 55144-1000For more information:In U.S.Technical Assistance 1-800-243-4630 Customer Care Center 1-800-328-1667/WorkerSafety In CanadaTechnical Assistance 1-800-267-4414 Customer Care 1-800-364-35773M.ca/Safety3M PSD products are occupational use only.3M and all other trademarks used herein are trademarks of 3M Company, used under license in Canada. Please recycle. Printed in U.S.A. © 3M 2018. All rights reserved. 70-0715-6919-1Rev. 01/201811476-00000-10Clear AF Lens, Grey Frame,Dual LED LightsLight Vision ™ 2Fuel ™11640-00000-10Red Mirror Lens, Metallic Sand Frame11641-00000-20Blue Mirror Lens, Silver Frame11664-00000-10Blue HC Mirror Lens, White Frame11650-0000-10Red Mirror Lens, Metallic Sand Frame11654-00000-10Grey AF Lens, Black Rubberized FrameSecureFit ™ 600Safety SunwearSS1330AS-GYellow Mirror AS Lens, Grey FrameSS1428AS-SBlue Mirror AS Lens, Silver Alum FrameSS1502AF-BGrey AF Lens, Black Frame w/GasketSS1502AF-WGrey AF Lens, White Frame w/GasketSS1514AS-SSilver Mirror AS Lens, Silver Black Frame w/GasketSS1511AF-BGrey Polarize AF Lens, Black Frame w/GasketSS1514AS-BSilver Mirror AS Lens, Black/Grey Frame w/GasketSS1629AS-BRed Mirror AS Lens, Black FrameSF601SGAFClear Scotchgard ™ AF LensSF601SGAF-FMClear Scotchgard ™ AF Lens, Foam GasketSF602SGAFGrey Scotchgard ™ AF LensSF602SGAF-FMGrey Scotchgard ™ AF Lens, Foam GasketSF603SGAFAmber Scotchgard ™ AF LensSF607SGAFIndoor/Outdoor Grey Scotchgard ™ AF LensSF601RASClear Rugged Anti-Scratch LensSF602RASGrey Rugged Anti-Scratch LensSF617ASLow IR R1.7, AS LensSF630ASShade W3.0, AS LensSF650AS W5, AS Lens SF611ASPolarized, AS LensSF613ASPhotochromic, AS LensLight Vision ™ OTG11489-00000-10Clear AF Lens, Dual LED Lights, OTG16617-00000-10Clear Lens, Black Frame w/Strap, Medium16618-00000-10Clear Lens, Black Frame w/Strap, LargeLexa ™Dust GoggleGear™Lexa ™ Splash GoggleGear ™16644-00000-10 Clear Lens, Medium, D3 D416645-00000-10 Clear Lens, Large, D3 D416400-00000-10Clear Lens, Elastic Strap, Medium16408-00000-10Clear Lens, Black Adjustable Temple,Medium16412-00000-10Clear Lens, Elastic Strap, Large16420-00000-10Clear Lens, Black Adjustable Temple,LargeFectoggles ™40300-00000-10Clear Lens, Impact Goggle40301-00000-10Clear AF Lens, Impact Goggle40304-00000-10Clear Lens, Splash Goggle, D3 D440305-00000-10Clear AF Lens, Splash Goggle, D3 D4Centurion ™Maxim ™ 2x2 Goggle40686-00000-10Clear Lens, Black Frame w/Strap, Temples40687-00000-10Grey Lens, Black Frame w/Strap, Temples40696-00000-10Clear Lens, Black Frame, Side Venting40698-00000Clear AF Lens, Black Strap, Air Flow Goggle40699-00000Grey AF Lens, Black Strap, Air Flow Goggle332 Impact Goggle40650-00000-10Clear Lens 40651-00000-10 Clear AF Lens334 Splash Goggle40660-00000-10 Clear Lens, D3 D440661-00000-10 Clear AF Lens, D3 D4GoggleGear ™ 500GG501SGAFClear Scotchgard ™ AF Lens, D3 D4,Cloth Strap GG501NSGAFClear Scotchgard ™ AF Lens, D3 D4,Neoprene Strap GG500-PI Prescription InsertGG500-NeoStrapReplacementNeoprene Strap GG500-ClthStrap Replacement Cloth StrapSAFETY GOGGLESACCESSORIESMaxim ™ Splash GoggleModul-R ™40671-00000-10Clear AF Lens, O-T-G, D3 D440658-00000-10Clear AF Lens, Chin ProtectorThe Complete Line of Protective Eyewear Products11215-00000-20 Grey AF Lens, Black Frame11216-00000-20I/O Mirror Lens, Black FrameMoon Dawg ™11532-10000-20Clear AF Lens, Blue Frame11554-00000-20Clear AF Lens, Bronze Frame11555-00000-20Bronze AF Lens, Bronze Frame11556-00000-20Blue Mirror HC Lens, Bronze FrameMetaliks ™ GTHIE6 Protective EyewearAttaches directly to 3M ™ Hard Hat SuspensionHIE601AF - Clear AF Lens HIE602AF - Amber AF Lens HIE603AF - Grey AF Lens3M ™ Protective Eyewear Slip-On Side Shields23451-00030-20 ClearReplacement Foam GasketSF-FOAM (SF400)SF600FI (SF600)GoggleGear ™ 2890 SeriesGG2891-SGAFClear Scotchgard ™ AF Lens,Indirect Vent3M ™ Lens Cleaner83803-00000Lens Cleaning Fluid 83745-00000Lens Cleaning T owelettesQX Privo 12261-00000-20Clear AF Lens, Black/Orange Frame12262-00000-20Grey AF Lens, Black/Orange Frame12263-00000-20Amber AF Lens, Black/Orange Frame12264-00000-20I/O Mirror Lens, Black/Orange Frame12265-00000-20Clear AF Lens, Silver/Red Frame12266-00000-20SF401SGAF-REDClear Scotchgard Anti-Fog LensRed/Gray Frame SF401SGAF-BLUClear Scotchgard Anti-Fog LensBlue/Gray Frame SF401SGAF-BLU-FClear Scotchgard Anti-Fog Lens with FoamGasket, Blue/Gray Frame SF402SGAF-BLU12100-10000-20 Clear Lens, Black Temple12101-10000-20Grey Lens, Black Temple 12109-10000-20Clear Lens, Black Temple, Soft Nose12110-10000-20Grey Lens, Black Temple, Soft Nose12115-10000-20Clear Lens, Black Sport Grip Temple, Soft Nose12180-10000-2011380-00000-20 Clear AF Lens, Silver Frame11381-00000-20Grey AF Lens, Silver Frame11471-00000-20Clear AF Lens, Blue Frame11472-00000-20I/O Mirror Lens, Blue Frame11523-00000-20Light Blue AF Lens, Blue Frame11477-00000-10Clear AF Lens, Grey Frame, +1.5 Diopter11478-00000-10Clear AF Lens, Grey Frame, +2.0 Diopter11479-00000-10Clear AF Lens, Grey Frame, +2.5 Diopter11374-00000-20Clear Lens, Silver Frame, +1.5 Diopter11375-00000-20Clear Lens, Silver Frame, +2.0 Diopter11376-00000-20Clear Lens, Silver Frame, +2.5 Diopter11377-00000-20Grey Lens, Silver Frame, +1.5 Diopter11378-00000-2011457-00000-10Clear AF Lens, Silver Frame, Dual +1.5 Diopter11458-00000-10Clear AF Lens, Silver Frame, Dual +2.0 Diopter11459-00000-10Clear AF Lens, Silver Frame, Dual +2.5 DiopterBX ReadersMetaliks Sport11343-10000-20Clear AF Lens, Brushed Nickel Frame11344-10000-20Grey AF Lens, Brushed Nickel Frame11345-10000-20I/O Mirror HC Lens, Brushed Nickel Frame11540-10000-20Blue Mirror HC Lens, Brushed Nickel FrameLexa ™15100-00000-20Clear AF Lens, Black Temple, Large15200-00000-20Clear AF Lens, Black Temple, Medium15154-00000-100Clear AF Lens, Black Temple, Large15204-00000-20Grey AF Lens, Black Temple, Medium15152-00000-100Clear AF Lens, Black Temple, Medium14246-00000-20Clear AF Lens, Metallic Grey/Black Frame14247-00000-20Grey AF Lens, Metallic Grey/Black Frame14248-00000-20 I/O Mirror Lens, Metallic Grey/Black FrameSF401AF Clear AF Lens SF402AF Grey AF Lens SF410ASIndoor/Outdoor Mirror LensSF401AF-FM Clear AF Lens, Foam SF402AF-FM Grey AF Lens, Foam SF410AS-FMSecureFit 400OX。

Motorola 3.5 kHz 产品说明书

Motorola 3.5 kHz 产品说明书

RVN4126 3.59100-386-9100-386/T DEVICERVN41772-CD2-3.5MCS/MTSRVN41821-CD2-3.5XTS3000/SABER PORTABLE YES RKN4046KHVN9085 3.51-20 R NO HLN9359 PROG. STAND RVN4057 3.532 X 8 CODEPLUG NO3080385B23 & 5880385B30 MDVN4965 3.59100-WS/T CONFIG KITRVN4053 3.5ASTRO DIGITAL INTERFACE NO3080385B23RVN41842-CD RKN4046A (Portable) 2-3.5ASTRO PORTABLE /MOBILE YES3080369B73 or0180300B10 (Mobile) RVN41831-CD3080369B732-3.5ASTRO SPECTRA MOBILE YES(Low / Mid Power)0180300B10 (High Power) RVN4185CD ASTRO SPECTRA PLUS MOBILE NO MANY OPTIONS; SEESERVICE BRIEF#SB-MO-0101RVN4186CD ASTRO SPECTRA PLUS MANY OPTIONS;MOBILE/PORTABLE COMB SEE SERVICE BRIEF#SB-MO-0101RVN4154 3.5ASTROTAC 3000 COMPAR.3080385B23RVN5003 3.5ASTROTAC COMPARATORS NO3080399E31 Adpt.5880385B34RVN4083 3.5BSC II NO FKN5836ARVN4171 3.5C200RVN4029 3.5CENTRACOM SERIES II NO VARIOUS-SEE MANUAL6881121E49RVN4112 3.5COMMAND PLUS NORVN4149 3.5COMTEGRA YES3082056X02HVN6053CD CT250, 450, 450LS YES AAPMKN4004RVN4079 3.5DESKTRAC CONVENTIONAL YES3080070N01RVN4093 3.5DESKTRAC TRUNKED YES3080070N01RVN4091 3.5DGT 9000 DESKSET YES0180358A22RVN4114 3.5GLOBAL POSITIONING SYS.NO RKN4021AHVN8177 3.5GM/GR300/GR500/GR400M10/M120/130YES3080070N01RVN4159 3.5GP60 SERIES YES PMLN4074AHVN9128 3.5GP300 & GP350RVN4152 3.5GP350 AVSRVN4150 3.5GTX YES HKN9857 (Portable)3080070N01(Mobile) HVN9025CD HT CDM/MTX/EX SERIES YES AARKN4083/AARKN4081RiblessAARKN4075RIBLESS NON-USA RKN4074RVN4098H 3.5HT1000/JT1000-VISAR YES3080371E46(VISAR CONV)RVN4151 3.5HT1000 AVSRVN4098 3.5HT1000/ VISAR CONV’L.YES RKN4035B (HT1000) HVN9084 3.5i750YES HLN-9102ARVN4156 3.5LCS/LTS 2000YES HKN9857(Portable)3080070N01(Mobile) RVN4087 3.5LORAN C LOC. RECV’R.NO RKN4021ARVN4135 3.5M100/M200,M110,M400,R100 includesHVN9173,9177,9646,9774YES3080070N01RVN4023 3.5MARATRAC YES3080070N01RVN4019 3.5MAXTRAC CONVENTIONAL YES3080070N01RVN4139 3.5MAXTRAC LS YES3080070N01RVN4043 3.5MAXTRAC TRK DUPLEX YES3080070N01RVN4178CD MC SERIES, MC2000/2500DDN6124AW/DB25 CONNECTORDDN6367AW/DB9 CONNECTOR RVN41751-CD Rib to MIC connector 1-3.5MCS2000 RKN4062BRVN41131-3.5MCS2000RVN4011 3.5MCX1000YES3000056M01RVN4063 3.5MCX1000 MARINE YES3000056M01RVN4117 3.5MDC/RDLAP DEVICESRVN4105 3.5MOBILE PROG. TOOLRVN4119 3.5MOBITEX DEVICESRVN4128 3.5MPT1327-1200 SERIES YES SEE MANUALRVN4025 3.5MSF5000/PURC/ANALOG YES0180355A30RVN4077 3.5MSF5000/10000FLD YES0180355A30RVN4017K 3.5MT 1000YES RTK4205CRVN4148 3.5MTR 2000YES3082056X02RVN4140 3.5MTRI 2000NORVN41761-CD MTS2000, MT2000*, MTX8000, MTX90001-3.5*programmed by DOS which is included in the RVN4176RVN4131 3.5MTVA CODE PLUG FIXRVN4142 3.5MTVA DOCTOR YES3080070N01RVN4131 3.5MTVA3.EXERVN4013 3.5MTX800 & MTX800S YES RTK4205CRVN4097 1-CD MTX8000/MTX9000,MTS2000,MT2000*,* programmed by DOS which is included in the RVN4176HVN9067CD MTX850/MTX8250MTX950,MTX925RVN4138 3.5MTX-LS YES RKN4035DRVN4035 3.5MX 1000YES RTK4203CRVN4073 3.5MX 800YES RKN4006BHVN9395 P100, P200 LB, P50+, P210, P500, PR3000RVN4134 3.5P100 (HVN9175)P200 LB (HVN9794)P50+ (HVN9395)P210 (HVN9763)P500 (HVN9941)PR3000 (HVN9586)YES RTK4205HVN9852 3.5P110YES HKN9755A/REX1143 HVN9262 3.5P200 UHF/VHF YES RTK4205RVN4129 3.5PDT220YVN4051 3.5PORTABLE REPEATER Portable rptr.P1820/P1821AXRVN4061C 3.5PP 1000/500NO3080385B23 & 5880385B30 RVN5002 3.5QUANTAR/QUANTRO NO3O80369E31RVN4135 3.5R100 (HVN9177)M100/M200/M110/M400YES0180358A52RVN4146 3.5RPM500/660RVN4002 3.5SABER YES RTK4203CRVN4131 3.5SETTLET.EXEHVN9007 3.5SM50 & SM120YESRVN4039 3.5SMART STATUS YES FKN5825AHVN9054 3.5SOFTWARE R03.2 P1225YES3080070N01HVN9001 3.5SOFTWARE R05.00.00 1225LS YES HLN9359AHVN9012 3.5SP50RVN4001N 3.5SPECTRA YES3080369B73 (STANDARD)0180300B10 (HIGH POWER) RVN4099 3.5SPECTRA RAILROAD YES3080369B73RVN4110 3.5STATION ACCESS MODULE NO3080369E31RVN4089A 3.5STX TRANSIT YES0180357A54RVN4051 3.5SYSTEMS SABER YES RTK4203BRVN4075 3.5T5600/T5620 SERIES NO3080385B23HVN9060CD TC3000, TS3000, TR3000RVN4123 3.5VISAR PRIVACY PLUS YES3080371E46FVN4333 3.5VRM 100 TOOLBOX FKN4486A CABLE &ADAPTORRVN4133 3.5VRM 500/600/650/850NORVN4181CD XTS 2500/5000 PORTABLES RKN4105A/RKN4106A RVN41002- 3.5XTS3000 ASTRO PORTABLE/MOBILERVN4170 3.5XTS3500YES RKN4035DRIB SET UPRLN4008E RADIO INTERFACE BOX (RIB)0180357A57RIB AC POWER PACK 120V0180358A56RIB AC POWER PACK 220V3080369B71IBM TO RIB CABLE (25 PIN) (USE WITH XT & PS2)3080369B72IBM TO RIB CABLE (9 PIN)RLN443825 PIN (F) TO 9 PIN (M) ADAPTOR (USE W/3080369B72 FOR AT APPLICATION) 5880385B308 PIN MODULAR TO 25 PIN ”D” ADAPTOR (FOR T5600 ONLY)0180359A29DUPLEX ADAPTOR (MOSTAR/TRAXAR TRNK’D ONLY)Item Disk Radio RIB Cable Number Size Product Required Number Item Disk Radio RIB Cable Number Size Product Required NumberUtilizing your personal computer, Radio Service Software (RSS)/Customer Programming Software (CPS)/CustomerConfiguration Software (CCS) enables you to add or reprogram features/parameters as your requirements change. RSS/CPS/CCS is compatible with IBM XT, AT, PS/2 models 30, 50, 60 and 80.Requires 640K RAM. DOS 3.1 or later. Consult the RSS users guide for the computer configuration and DOS requirements. (ForHT1000, MT/MTS2000, MTX838/8000/9000, Visar and some newer products —IBM model 386, 4 MEG RAM and DOS 5.0 or higher are recommended.) A Radio Interface Box (RIB) may be required as well as the appropriate cables. The RIB and cables must be ordered separately.Licensing:A license is required before a software (RVN) order is placed. The software license is site specific (customer number and ultimate destination tag). All sites/locations must purchase their own software.Be sure to place subsequent orders using the original customer number and ship-to-tag or other licensed sites; ordering software without a licensed customer number and ultimate tag may result in unnecessary delays. To obtain a no charge license agreement kit, order RPX4719. To place an order in the U.S. call 1-800-422-4210. Outside the U.S., FAX 847-576-3023.Subscription Program:The purchase of Radio ServiceSoftware/Customer Programming/Customer ConfigurationSoftware (RVN & HVN kits) entitles the buyer/subscriber to three years of free upgrades. At the end of these three years, the sub-scriber must purchase the same Radio Service Software kit to receive an additional three years of free upgrades. If the sub-scriber does not elect to purchase the same Radio Service Software kit, no upgrades will be sent. Annually a subscription status report is mailed to inform subscribers of the RSS/CPS/CCS items on our database and their expiration dates.Notes:1)A subscription service is offered on “RVN”-Radio Service Software/Customer Programming/Customer Configuration Software kits only.2)“RVN” software must only be procured through Radio Products and Services Division (RPSD). Software not procured through the RPSD will not be recorded on the subscription database; upgrades will not be mailed.3)Upgrades are mailed to the original buyer (customer number & ultimate tag).4)SP software is available through the radio product groups.The Motorola General Radio Service Software Agreement is now available on Motorola Online. If you need assistance please feel free to submit a “Contact Us” or call 800-422-4210.SMART RIB SET UPRLN1015D SMART RIB0180302E27 AC POWER PACK 120V 2580373E86 AC POWER PACK 220V3080390B49SMARTRIB CABLE (9 PIN (F) TO 9 PIN (M) (USE WITH AT)3080390B48SMARTRIB CABLE (25 PIN (F) TO 9 PIN (M) (USE WITH XT)RLN4488ASMART RIB BATTERY PACKWIRELESS DATA GROUP PRODUTS SOFTWARERVN4126 3.59100-386/9100T DEVICES MDVN4965 3.59100-WS/T CONFIG’TN RVN41173.5MDC/RDLAP DEVICESPAGING PRODUCTS MANUALS6881011B54 3.5ADVISOR6881029B90 3.5ADVISOR ELITE 6881023B20 3.5ADVISOR GOLD 6881020B35 3.5ADVISOR PRO FLX 6881032B30 3.5BR8506881032B30 3.5LS3506881032B30 3.5LS5506881032B30 3.5LS7506881033B10 3.5LS9506881035B20 3.5MINITOR III8262947A15 3.5PAGEWRITER 20008262947A15 3.5PAGEWRITER 2000X 6881028B10 3.5TALKABOUT T3406881029B35 3.5TIMEPORT P7308262947A15 3.5TIMEPORT P930NLN3548BUNIVERSAL INTERFACE KITItem Disk Radio NumberSize Product。

国内外常用钢材牌号对照表

国内外常用钢材牌号对照表

常用国内外钢材牌号对照表中国 美国 日本 德国 英国 法国 前苏联 国际标准化组织GB AST JIS DIN 、DINEN BS 、BSEN NF 、NFEN ΓOCT ISO 630品 名牌号牌号 牌号 牌号牌号 牌号牌号Q195Cr.B Cr.CSS330 SPHC SPHDS185 040 A10 S185S185CT1K ПCTlC П CTl ПCQ215A Cr.C Cr.58SS 330 SPHC040 A12CT2K П—2CT2C П—2 CT2ПC —2 Q235ACr.DSS400 SM400A080A15CT3K П—2CT3C П—2 CT3ПC —2E235B Q235B Cr.DSS400 SM400AS235JR S235JRGl S235JRG2S235JR S235JRGl S235JRG2S235JR S235JRGl S235JRG2CT3K П—3 CT3C П—3 CT3ПC —3 E235B Q255ASS400 SM400ACT4K П—2CT4C П—2 CT4ПC —2 普 通 碳 素 结 构 钢Q275 SS490 CT5C П—2 CT5ПC —2E275A中国美国 日本 德国 英国 法国 前苏联 国际标准化组织 GB AST JIS DIN 、DINENBS 、BSEN NF 、NFEN ΓOCT IS0 630品 名牌号 牌号 牌号 牌号 牌号 牌号 牌号 08F1008 1010 SPHD SPHE040A1080K П10 1010S10C S12C CKl0 040A12 XCl0 10 C101151015 S15C S17C CKl5 Fe360B 08M15 XCl2 Fe306B 15 C15E4201020 S20C S22C C22IC22 C222025 1025 S25C S28C C25 IC25 C25 25 C25E440 1040 S40C S43C C40 IC40 080M40 C40 40 C40E445 1045 S45C S48C C45 IC45 080A47 C45 45 C45E450 1050 S50C S53C C50 IC50 080M50 C50 50 C50E4 优 质 碳 素 结 构 钢15Mn1019080A1515r中国美国 日本 德国英国 法国 前苏联 国际标准化组织 GB AST JIS DIN 、DINENBS 、BSENNF 、NFENΓOCT IS0 630品 名牌号 牌号牌号 牌号 牌号 牌号 牌号 T7(A)SK7 C70W2060A67 060A72 C70E2Uy7TC70T8(A)T72301 WlA —8SK5 SK6 C80W1 060A78 060A81 C80E2Uy8 TC80T8Mn(A)SK5 C85W 060A81 Y75 y8r T10(A) T72301 W1A —91/2SK3 SK4 C105W11407C105E2Uy10TCl05T11(A) T72301 W1A —10l/2SK3C105W1 1407 C105E2U y11 TCl05碳 素 工 具 钢T12(A) T72301 WlA —111/2 SK2 1407 C120E3U y12 TCl20Crl2T30403(UNS)(D3)SKDl X210Crl2 BD3 X210Crl2 X12 210Crl2Crl2MolVl T30402(UNS)(D2)SKDll X155CrVMo121BD2160CrMoVl25CrMnMo5X ΓM 5CrNiMo T61206(UNS)(L6) SKT4 55NiCrMoV6BH224/5 55NiCrMoV75XHM合 金 工 具 钢3Cr2W8V T20821SKD5BH21X30WCrV93X2B8Φ30WCrV9中国美国 日本 德国 英国 法国 前苏联 国际标准化组织GB AST JIS DIN 、DINEN BS 、BSENNF 、NFEN ΓOCT IS0 630品 名牌号 牌号 牌号 牌号 牌号 牌号 牌号 W18Cr4VT12001(UNS)(T1) SKH2BTlHSl8-0-1P18HSl8-0-1 (S1) W18Cr4VCo5T12004(UNS)(T4) SKH3 S18-l-2-5 BT4 HSl8-1-1-5HSl8-1-1-5(S7) 高 速 工 具 钢W6Mo5Cr4V2 T11302(UNS)(M2) SKH51 S6-5-2 BM2 HS6-5-2 p6M5HS6-5-2 (S4) 1Crl8Ni9 S30200(UNS)(302) SUS302 X10CrNis 18-9 302S31 302S25 Z12CNl8-09 12X18H912 10 1Crl8Ni9Ti S32100(UNS)(321)SUS321 X6CrNiTi 18-10 X6CrNiTi 18-10 X6CrNiTi 18-10 12X18H 10TX6CrNiTi181011 2Crl3S42000(UNS) (420)SUS420J1X20Crl3420S37 X20Crl3 X20Crl320X13440Mn1043 SWRH42B C40 080M40 1C40 C40 40ΓSL SM 45Mn 1046 SWRH47B C45 080M47 2C45C45 45ΓSL SM 不 锈 钢65Mn 1065 65ΓASLSM TypeSC TypDC中国美国 日本 德国 英国 法国 前苏联 国际标准化组织GB AST JIS DIN 、DINEN BS 、BSEN NF 、NFEN ΓOCT IS0 630品 名牌号 牌号 牌号 牌号 牌号 牌号 牌号Y12 1211 G12110(UNS) SUM12 SUM21 10S20 S10M15 13MF4 A12 10S20 Y12Pb 12L13 SUM22L10SPb2010SPb20 11SMnPb28Y20 1117 G11170(UNS)SUM32 C22 C22 210M15 C22 A20Y40Mn 1144 G11440(UNS)SUM43 226M4445MF6.3 A40Γ 44Mn28Y45Ca 1145C45 C45 C45易 切 削 结 构 钢Y1Crl8Ni9 SUS303 X8CrNiSl8—9 303S31 303S21 17Q295A Gr.42 Gr.A SPFC490 E295 E295E295 295Q295B Gr.42 Gr.A SPFC490 S275JR S275JR S275JR 295Q345CGr.50Gr.A Gr.C ,Gr.D A808MSPFC590 S335JO S335JO S335JO 345 E355DDQ345EType7 Gr.50 SPFC590 S355NL S355ML S355NL S355ML S355NL S355MLE355E E355DD 低 合 金 结 构 钢Q420B Cr60 Gr.ESEV295 SEV345S420NL S420MLS420NL S420MLS420NL S420MLS420C E420CC中国美国 日本 德国 英国 法国 前苏联 国际标准化组织GB AST JIS DIN 、DINEN BS 、BSEN NF 、NFEN ΓOCT IS0 630品 名牌号牌号 牌号 牌号 牌号 牌号 牌号 Q420C Gr.B Type7SEV295 SEV345 S420NL S420MLS420NL S420MLS420NL S420MLHS420D E420DD低 合 金 结 构 钢Q460DGr.65 SM570SMA570W SMA570PS460NL S460MLS460NL S460MLS460NL S460MLE460DD F460E20Mn2 1524 SMn420 P355GH 0355GH P0355GH 22Mn615Cr 5115 SCr415 17Cr3 527A17 15X20Cr 5120 SCr420 20Cr4 590M17 20x 20Cr430Cr 5130 SCr430 34Cr4 34Cr4 34Cr4 30x 34Cr440Cr5140 SCr440 41Cr4 41Cr4 41Cr4 40x 4lCr445Cr5145 SCr445 4lCr4 41Cr4 4lCr4 45x 41Cr430CrMo 4130 SCM430 25CrMo4 25CrMo4 25CrMo4 30xM 25CrMo435CrMo 4317 SCM435 34CrMo4 34CrMo4 34CrMo4 35xM 34CrMo442CrMo 4140 SCM440 42CrMo4 42CrMo4 42CrMo4 38xM 42CrMo438CrMoAl SCM645 41CrAlMo7 905M39 38x2MIoA 41CrAlMo7450CrVA 6150 SCPl0 5lCrV4 51CrV4 51CrV4 50x ΦA 51CrV4合 金 结 构 钢40CrMnMo 4140 4142SCM440 42CrM 04 42CrMo4 708Mn4042CrMo4 42CrMo4中国美国 日本 德国 英国 法国 前苏联 国际标准化组织GB AST JIS DIN 、DINEN BS 、BSEN NF 、NFEN ΓOCT ISO630 品 名牌号 牌号 牌号 牌号 牌号 牌号 牌号 85 1084 SUP3 CK85 FMR86 TypeDC 55Si2Mn9260 H92600 SUP6 SUP7 55Si7251H6056SC756SiCr760Si2Mn H92600 SUP6 SUP7 60SiCr7 25H60 61SiCr7 61SiCr755CrMnA H51550 G51550 SUP9 55Cr3 525A58 527A60 55Cr3 55Cr3 60Si2CrVA 弹 簧 钢50CrVA H51500 G61500 SUPl0 50CrV4 735A51 50CV4 50x ΦA 5lCrV4 GCr951100 SUJl GCrl552100 SUJ2 100Gr6 100Gr6 WXl5 l 轴 承 钢9Crl8Mo440C SUS440C Z100CDl7 2l 35W250 36F320M 35A250 M250—35A M250—35A M250—35A 2413 电 工 钢27QGll0 27P146M27P110M103—27PM103—27PM103—27P3408。

EMC Teseq NSG 3040A多功能干扰源说明书

EMC Teseq NSG 3040A多功能干扰源说明书

Teseq’s new NSG 3040A is an easy-to-use multifunction generator that simulates electromagnetic interference effects for immunity testing in conformity with international, national and manufacturers’ standards including the latest IEC/EN standards. The NSG 3040A system is designed to fulfill conducted EMC test requirements for CE mark testing, which generally include combination wave surge, Electrical Fast Transient (EFT) pulses and Power Quality Testing (PQT). Extensive expansion capabilities enable the system to be configured for a much broader range of applications.Featuring an innovative, modular design, the NSG 3040A is a versatile system that can be configured for basic testing needs and expanded to meet the needs of sophisticated test laboratories.Using state-of-the-art components, the self-contained modules set new standards with respect to switching and phase accuracy and exceed the existing standards’ requirements.A 7” touch panel display with superb contrast and color makes controlling the NSG 3040A easy. For fast and efficient data entry, input devices include an integrated keyboard and a thumbwheel with additional keys for sensitivity adjustment. To achieve quick, reliable results in a development environment a standardized test can be initiated with just a few “clicks” using the integrated Test Assistance (TA) function.Convenient touch input buttons make each parameter’s value highly visible and allow the user to quickly select and modify all settings. A stylus is not necessary, and ramp functions can be programmed quickly and easily. Multi-step test procedures can be created and their sequence or parameter values can be changed easily.With expert mode users can make manual parameter changes using the thumbwheel while a test is under way, providing an effective and fast method for identifying critical threshold values. The NSG 3040A has an Ethernet port for external PC control. The Windows-based control software simplifies test programming and compilation of complex test sequences with various types of tests. Test reports can be generated during the test operation, allowing the operator to enter observations as the test progresses and increasing the efficiency of long-term tests.One box solution system Surge voltage to 4.8 kV EFT/Burst to 4.8 kV / 1 MHz PQT to 16 A / 300 VAC & DC Easy to use 7“ color touch screen Parameters can be changed while test running Wide range of optional testaccessoriesTHE SMART 4 KV SOLUTION FOR CE APPLICATIONSNSG 3040ANSG 3040ATHE SMART 4 KV SOLUTION FOR CE APPLICATIONSThe NSG 3040A performs tests according to the following specifications:Combination wave pulse 1, 2/50 - 8/20 µs (Hybrid-Surge pulse)Pulse conforms to IEC/EN 61000-4-5Parameter ValuePulse voltage (open circuit): ±200 V to 4.8 kV (in 1 V steps)Pulse current (short circuit): ±100 A to 2.4 kAImpedance: 2/12 ΩPolarity: positive / negative / alternatePulse repetition: 10 s, up to 9’999 s (in 1 s steps)Test duration: 1 to 99’999 pulses, continuousPhase synchronization: asynchronous, synchronous 0 to 359º (in 1º steps)Coupling: IEC / externalBurst (EFT) 5/50 nsPulse conforms to IEC/EN 61000-4-4Parameter ValuePulse amplitude: ±200 V to 4.8 kV (in 1 V steps) - open circuit±100 V to 2.4 kV (50 Ω matching system)Burst frequency: 100 Hz to 1000 kHzPolarity: positive / negative / alternateRepetition time: 10 ms to 9'999 msBurst duration: 0.01 ms to 9'999 ms, single pulseTest duration: 1 s to 9’999s, 1 min to 1600 min, endlessPhase synchronization: asynchronous, synchronous 0 to 359º (in 1º steps)Coupling: internal / externalNSG 3040ATHE SMART 4 KV SOLUTION FOR CE APPLICATIONSDips & Interruptsconforms to IEC/EN 61000-4-11, IEC/EN 61000-4-29Parameter ValueDips & Interrupts: From EUT voltage input to 0 V, 0% (1)Uvar with optional variac: depending on model (VAR 3005A)Uvar with step transformer: 0, 40, 70, 80% (INA 650xA)Peak inrush current capability: > 500 A (at 230 V)Switching times: 1 to 5 μs (100 Ω load)Event time (T-Event): 20 µs to 9999 s, 0.5 to 9’999 cyclesRepetition time:10 ms to 9’999 ms, 1 to 9’999 sTest duration: 1 to 99’999 events, endlessPhase synchronization: asynchronous, synchronous 0 to 359º (in 1º steps)chapt. 5.1 a test voltage level from 0% to 20% of the rated voltage is considered as a total interruption.Variation test (with VAR 3005A only)conforms to IEC/EN 61000-4-11Parameter ValueUvar with optional variac: up to approx. 265 V (in 1 V steps) or up to 115% Uin (in 1% steps)Decreasing time Td: 1 ms to 9.999 s, 0.5 to 9999 cycles, abruptTime at reduced voltage Ts: 1 ms to 9.999 s, 0.5 to 9999 cycles,Increasing time Ti: 1 ms to 9.999 s, 0.5 to 9999 cycles,Repetition time: 1 s to 9’999 sEvents: 1 to 99’999Pulsed magnetic field in conjunction with MFC 30conforms to IEC/EN 61000-4-9Parameter ValueField: 100 to 1200 A/mPolarity: positive / negative / alternateRepetition time: 10 s to 9999s (in 1 s steps)Impedance: 2 ΩCoil / impedance factor: 0.01 to 100.00Test duration: 1 to 9’999 pulses, endlessPhase synchronization: asynchronous, synchronous 0 to 359º (in 1º steps)NSG 3040ATHE SMART 4 KV SOLUTION FOR CE APPLICATIONSPower magnetic field in conjunction with MFT 30 or MFO 6501 and MFC 30 & MFC 300conforms to IEC/EN 61000-4-8Parameter ValueField: 1 to max. 40 A/mFrequency: 50 or 60 HzCoil factor: 0.01 to 100Test duration: 1 s to 99’999 s, endlessInternal coupling networkParameter ValueEUT supply: 1-phaseEUT VAC: Up to 300 Vrms *, 50 / 60 Hz (phase - neutral)EUT VDC: Up to 300 VDCEUT current 1 x 16 Arms continuous (over heat protected)Connections: Front panel:Rear panel - EUT: 4mm banana plug- Burst OUT 50 SHV- Trigger out BNC- EUT supply: banana plug 4 mm- Additional ground connector- Instrument supply 85 V to 264 VAC - Connector surge HV – COMSurge Standard coupling as per IEC 61000-4-5Coupling mode Line to LineLine(s) to groundMains decoupling: 1.5 mH 0% + 35%Decoupling attenuation: Residual pulse voltage on EUT power supply inputs 15 % max.Residual voltage on non-pulsed EUT power supply inputs 15 % max. EFT (Burst) Standard coupling all lines to ref ground (GND)IEC / EN 61000-4-4L, N, PE to ref GNDAny lines and combinatio L tto ref GND: to ref GNDN to ref GNDPE to ref GNDL, N to ref GNDL, PE to ref GNDN, PE to ref GND PQT: Dips & interrupts to phase LNSG 3040ATHE SMART 4 KV SOLUTION FOR CE APPLICATIONSTechnical specificationInstrument supply 85 to 265 VAC, 50 / 60 HzDimensions NSG 3040A: 19”; 3 HU, 448 x 154 x 500 mm (W x H x D)Weight NSG 3040A: approx. 22 kg (49 lbs)Type DescriptionCDN 3043A-C32 Three phase automatic coupling decoupling network, 3x480 V / 32 ACDN 3425 Burst EFT capacitive coupling clamp for data line couplingCDN 117A-C4-4-1 Coupling networks for unsymmetrical signal-/data lines (surge)CDN 118A-C4-4-1 Coupling networks for symmetrical signal-/data lines (surge)CDN HSS-2 Coupling network for 2 kV surge pulse 1.2 / 50 μs IEC/EN 61000-4-5on unshielded symmetrical high speed telecom lines (Ethernet)PVF BKIT 1Burst/EFT verification setMD 210 Voltage differential probe 3.5 kV / 7 kVMD 300 Current probe 5 kAType DescriptionTVT 1-250-16Manual step transformer, 16 AAC, 0/40/70/80%VAR 3005A-S16 Automatic single variable transformer, 1 x 16 AAccessories for IEC/EN 61000-4-8/-4-9AMETEK CTSSternenhofstr. 15 4153 Reinach SwitzerlandT + 41 61 204 41 11 F + 41 61 204 41 00************************© December 2018 AMETEK CTSSpecifications subject to change without notice. Teseq® is an ISO-registered company. Its products are designed and manufactured under the strict quality and environmental requirements of the ISO 9001. This document has been carefully checked. However, Teseq® does not assume any liability for errors or inaccuracies.691-387 A December 2018Type DescriptionMFO 6501A Manual magnetic field option for -4-8MFC 30 Magnetic field coil 1 x 1 m, with MFO max. 40 A/m -4-8;Surge* max. 1200 A/m -4-9MFC 300 Magnetic field coil 1 x 1 m; max. 330 A/m -4-8。

美国钢铁产品的标准比较多

美国钢铁产品的标准比较多

美国钢铁产品的标准比较多,主要有以下几种:美国钢铁产品的标准比较多,主要有以下几种:ANSI 美国国家标准AISI??美国钢铁学会标准ASTM 美国材料与试验协会标准ASME 美国机械工程师协会标准AMS 航天材料规格(美国航空工业最常用的一种材料规格,由SAE制定)API 美国石油学会标准AWS 美国焊接协会标准SAE 美国机动车工程师协会标准MIL 美国军用标准QQ 美国联邦政府标准A216::WCB , WCCA217: WC6 , WC9 , C5 (ZGCr5Mo)A351: CF8 , CF3 , CF3 M , CF8C标准号? ? ? ? 标准中文名称? ? ? ? 标准英文名称ASTM A1-00 ? ? ? ? 碳素钢丁字轨? ? ? ? Standard Specification for Carbon Steel Tee Rails ASTM A2-02 ? ? ? ? 普通型,带槽和防护型碳素工字钢轨? ? ? ? Standard Specification for Carbon Steel Girder Rails of Plain, Grooved, and Guard TypesASTM A3-01 ? ? ? ? 低、中、高碳素钢鱼尾(连接)板? ? ? ? Standard Specification for Steel Joint Bars, Low, Medium, and High Carbon (Non-Heat-Treated)ASTM A6/A6M-04a ? ? ? ? 轧制结构钢板材、型材和薄板桩通用技术要求? ? ? ? Standard Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet Piling ASTM A20/A20M-04a ? ? ? ? 压力容器用钢板材通用要求? ? ? ? Standard Specification for General Requirements for Steel Plates for Pressure VesselsASTM A27/A27M-03 ? ? ? ? 通用碳素钢铸件? ? ? ? Standard Specification for Steel Castings, Carbon, for General ApplicationASTM A29/A29M-04 ? ? ? ? 热锻及冷加工碳素钢和合金钢棒? ? ? ? Standard Specification for Steel Bars, Carbon and Alloy, Hot-Wrought, General Requirements forASTM A31-04 ? ? ? ? 钢铆钉及铆钉和压力容器用棒材? ? ? ? Standard Specification for Steel Rivets and Bars for Rivets, Pressure VesselsASTM A34/A34M-01 ? ? ? ? 磁性材料的抽样和采购试验的标准惯例? ? ? ? Standard Practice for Sampling and Procurement Testing of Magnetic MaterialsASTM A36/A36M-04 ? ? ? ? 碳素结构钢技术规范? ? ? ? Standard Specification for Carbon Structural SteelASTM A47/A47M-99 ? ? ? ? 铁素体可锻铁铸件? ? ? ? Standard Specification for Ferritic Malleable Iron CastingsASTM A48/A48M-03 ? ? ? ? 灰铁铸件? ? ? ? Standard Specification for Gray Iron CastingsASTM A49-01 ? ? ? ? 经热处理的碳素钢鱼尾(连接)板,微合金鱼尾板及锻制碳素钢异型鱼尾板? ? ? ? Standard Specification for Heat-Treated Carbon Steel Joint Bars, Microalloyed Joint Bars, and Forged Carbon Steel Compromise Joint BarsASTM A53/A53M-04 ? ? ? ? 无镀层热浸的、镀锌的、焊接的及无缝钢管的技术规范? ? ? ? Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and SeamlessASTM A65-01 ? ? ? ? 钢轨道钉? ? ? ? Standard Specification for Steel Track SpikesASTM A66-01 ? ? ? ? 钢质螺旋道钉? ? ? ? Standard Specification for Steel Screw SpikesASTM A67-00 ? ? ? ? 热加工低碳钢和高碳钢垫板技术规范? ? ? ? Standard Specification for Steel Tie Plates, Low-Carbon and High-Carbon Hot-WorkedASTM A74-04 ? ? ? ? 铸铁污水管及配件的技术规范? ? ? ? Standard Specification for Cast Iron Soil Pipe and FittingsASTM A82-02 ? ? ? ? 钢筋混凝土用无节钢丝? ? ? ? Standard Specification for Steel Wire, Plain, for Concrete ReinforcementASTM A90/A90M-01 ? ? ? ? 镀锌和镀锌合金钢铁制品镀层重量的试验方法? ? ? ? Standard Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings ASTM A99-03 ? ? ? ? 锰铁合金? ? ? ? Standard Specification for FerromanganeseASTM A100-04 ? ? ? ? 硅铁? ? ? ? Standard Specification for FerrosiliconASTM A101-04 ? ? ? ? 铬铁? ? ? ? Standard Specification for FerrochromiumASTM A102-04 ? ? ? ? 钒铁合金? ? ? ? Standard Specification for FerrovanadiumASTM A105/A105M-03 ? ? ? ? 管系部件用碳素钢锻件? ? ? ? Standard Specification for Carbon Steel Forgings for Piping ApplicationsASTM A106/A106M-04a ? ? ? ? 高温用无缝碳素钢管? ? ? ? Standard Specification for Seamless Carbon Steel Pipe for High-Temperature ServiceASTM A108-03 ? ? ? ? 优质冷加工碳素钢棒材技术规范? ? ? ? Standard Specification for Steel Bar, Carbon and Alloy, Cold-FinishedASTM A109/A109M-03 ? ? ? ? 冷轧碳素钢带技术规范? ? ? ? Standard Specification for Steel, Strip, Carbon (0.25 Maximum Percent), Cold-RolledASTM A111-99a(2004)e1 ? ? ? ? 电话和电报线路用镀锌"铁"丝规格? ? ? ? Standard Specification for Zinc-Coated (Galvanized) Iron Telephone and Telegraph Line WireASTM A116-00 ? ? ? ? 镀锌钢丝编织栏栅网? ? ? ? Standard Specification for Metallic-Coated, Steel Woven Wire Fence FabricASTM A121-99(2004) ? ? ? ? 镀锌刺钢丝? ? ? ? Standard Specification for Mettalic-Coated Carbon Steel Barbed WireASTM A123/A123M-02 ? ? ? ? 钢铁产品的锌镀层(热浸镀锌)技术规范? ? ? ? Standard Specification for Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel ProductsASTM A125-96(2001) ? ? ? ? 热处理螺旋形钢弹簧? ? ? ? Standard Specification for Steel Springs, Helical, Heat-TreatedASTM A126-04 ? ? ? ? 阀门、法兰和管配件用灰铁铸件? ? ? ? Standard Specification for Gray Iron Castings for Valves, Flanges, and Pipe FittingsASTM A128/A128M-93(2003) ? ? ? ? 钢铸件,奥氏体锰? ? ? ? Standard Specification for Steel Castings, Austenitic ManganeseASTM A131/A131M-04 ? ? ? ? 海船用结构钢? ? ? ? Standard Specification for Structural Steel for ShipsASTM A132-04 ? ? ? ? 钼铁合金? ? ? ? Standard Specification for FerromolybdenumASTM A134-96(2001) ? ? ? ? 电熔(电弧)焊钢管(NPS为16英寸和16英寸以上)? ? ? ? Standard Specification for Pipe, Steel, Electric-Fusion (Arc)-Welded (Sizes NPS 16 and Over)ASTM A135-01 ? ? ? ? 电阻焊钢管? ? ? ? Standard Specification for Electric-Resistance-Welded Steel PipeASTM A139/A139M-04 ? ? ? ? 电熔(电弧)焊钢管(4英寸以上的)? ? ? ? Standard Specification for Electric-Fusion (Arc)-Welded Steel Pipe (NPS 4 and Over)ASTM A143/A143M-03 ? ? ? ? 热浸镀锌结构钢制品防脆裂措施和探测脆裂的程序? ? ? ? Standard Practice for Safeguarding Against Embrittlement of Hot-Dip Galvanized Structural Steel Products and Procedure for Detecting EmbrittlementASTM A144-02 ? ? ? ? 铁钨合金规范? ? ? ? Specification for FerrotungstenASTM A146-04 ? ? ? ? 氧化钼制品? ? ? ? Standard Specification for Molybdenum Oxide Products ASTM A148/A148M-03 ? ? ? ? 结构用高强度钢铸件? ? ? ? Standard Specification for Steel Castings, High Strength, for Structural PurposesASTM A153/A153M-04 ? ? ? ? 钢铁制金属构件上镀锌层(热浸)? ? ? ? Standard Specification for Zinc Coating (Hot-Dip) on Iron and Steel HardwareASTM A159-83(2001) ? ? ? ? 汽车用灰铁铸件? ? ? ? Standard Specification for Automotive Gray Iron CastingsASTM A167-99 ? ? ? ? 不锈钢和耐热铬镍钢板、薄板及带材? ? ? ? Standard Specification for Stainless and Heat-Resisting Chromium-Nickel Steel Plate, Sheet, and StripASTM A176-99 ? ? ? ? 不锈钢和耐热铬钢板、薄板及带材? ? ? ? Standard Specification for Stainless and Heat-Resisting Chromium Steel Plate, Sheet, and StripASTM A178/A178M-02 ? ? ? ? 电阻焊接碳素钢钢管及碳锰钢锅炉和过热器管的技术规范? ? ? ? Standard Specification for Electric-Resistance-Welded Carbon Steel and Carbon-Manganese Steel Boiler and Superheater TubesASTM A179/A179M-90a(2001) ? ? ? ? 热交换器和冷凝器用无缝冷拉低碳钢管? ? ? ? Standard Specification for Seamless Cold-Drawn Low-Carbon Steel Heat-Exchanger and Condenser Tubes ASTM A181/A181M-01 ? ? ? ? 普通锻制碳素钢管的规格? ? ? ? Standard Specification for Carbon Steel Forgings, for General-Purpose PipingASTM A182/A182M-02 ? ? ? ? 高温设备用锻制或轧制的合金钢管法兰、锻制管件、阀门及零件? ? ? ? Standard Specification for Forged or Rolled Alloy-Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature ServiceASTM A183-03 ? ? ? ? 钢轨用碳素钢螺栓和螺母? ? ? ? Standard Specification for Carbon Steel Track Bolts and NutsASTM A184/A184M-01 ? ? ? ? 混凝土加筋用变形钢筋编织网? ? ? ? Standard Specification for Fabricated Deformed Steel Bar Mats for Concrete ReinforcementASTM A185-02 ? ? ? ? 钢筋混凝土用焊接钢丝结构? ? ? ? Standard Specification for Steel Welded Wire Reinforcement, Plain, for ConcreteASTM A192/A192M-02 ? ? ? ? 高压用无缝碳素钢锅炉管? ? ? ? Standard Specification for Seamless Carbon Steel Boiler Tubes for High-Pressure ServiceASTM A193/A193M-04b ? ? ? ? 高温设备用合金钢和不锈钢螺栓材料? ? ? ? Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for High-Temperature ServiceASTM A194/A194M-04a ? ? ? ? 高温和高压设备用碳素钢与合金钢螺栓和螺母的规格? ? ? ? Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, or BothASTM A197/A197M-00 ? ? ? ? 化铁炉用可锻铸铁? ? ? ? Standard Specification for Cupola Malleable IronASTM A202/A202M-03 ? ? ? ? 压力容器用铬锰硅合金钢板? ? ? ? Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Manganese-SiliconASTM A203/A203M-97(2003) ? ? ? ? 压力容器用镍合金钢板? ? ? ? Standard Specification for Pressure Vessel Plates, Alloy Steel, NickelASTM A204/A204M-03 ? ? ? ? 压力容器用钼合金钢板? ? ? ? Standard Specification for Pressure Vessel Plates, Alloy Steel, MolybdenumASTM A209/A209M-03 ? ? ? ? 锅炉和过热器用无缝碳钼合金钢管? ? ? ? Standard Specification for Seamless Carbon-Molybdenum Alloy-Steel Boiler and Superheater TubesASTM A210/A210M-02 ? ? ? ? 锅炉和过热器用无缝中碳素管? ? ? ? Standard Specification for Seamless Medium-Carbon Steel Boiler and Superheater TubesASTM A213/A213M-04 ? ? ? ? 无缝铁素体和奥氏体合金钢锅炉、过热器和换热器管? ? ? ? Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, andHeat-Exchanger TubesASTM A214/A214M-96(2001) ? ? ? ? 热交换器与冷凝器用电阻焊接碳素钢管? ? ? ? Standard Specification for Electric-Resistance-Welded Carbon Steel Heat-Exchanger and Condenser Tubes ASTM A216/A216M-93(2003) ? ? ? ? 高温下使用的适合于熔焊的碳素钢铸件规格? ? ? ? Standard Specification for Steel Castings, Carbon, Suitable for Fusion Welding, for High- Temperature ServiceASTM A217/A217M-02 ? ? ? ? 适合高温受压零件用合金钢和马氏体不锈钢铸件? ? ? ? Standard Specification for Steel Castings, Martensitic Stainless and Alloy, for Pressure-Containing Parts, Suitable for High-Temperature ServiceASTM A220/A220M-99 ? ? ? ? 珠光体可锻铁? ? ? ? Standard Specification for Pearlitic Malleable IronASTM A225/A225M-03 ? ? ? ? 压力容器用锰矾镍合金钢板? ? ? ? Standard Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Vanadium-NickelASTM A227/A227M-99 ? ? ? ? 机械弹簧用冷拉钢丝? ? ? ? Standard Specification for Steel Wire, Cold-Drawn for Mechanical SpringsASTM A228/A228M-02 ? ? ? ? 乐器用优质弹簧钢丝? ? ? ? Standard Specification for Steel Wire, Music Spring QualityASTM A229/A229M-99 ? ? ? ? 机械弹簧用油回火的钢丝? ? ? ? Standard Specification for Steel Wire, Oil-Tempered for Mechanical SpringsASTM A230/A230M-99 ? ? ? ? 阀门用油回火优质碳素钢弹簧丝? ? ? ? Standard Specification for Steel Wire, Oil-Tempered Carbon Valve Spring QualityASTM A231/A231M-96(2002) ? ? ? ? 铬钒合金钢弹簧丝? ? ? ? Standard Specification for Chromium-Vanadium Alloy Steel Spring WireASTM A232/A232M-99 ? ? ? ? 阀门用优质铬钒合金钢弹簧丝? ? ? ? Standard Specification for Chromium-Vanadium Alloy Steel Valve Spring Quality WireASTM A234/A234M-04 ? ? ? ? 中温与高温下使用的锻制碳素钢及合金钢管配件? ? ? ? Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature ServiceASTM A239-95(2004) ? ? ? ? 用普力斯试验法(硫酸铜浸蚀)确定铁或钢制品上镀锌层最薄点的测试方法? ? ? ? Standard Practice for Locating the Thinnest Spot in a Zinc (Galvanized) Coating on Iron or Steel ArticlesASTM A240/A240M-04ae1 ? ? ? ? 压力容器用耐热铬及铬镍不锈钢板、薄板及带材? ? ? ? Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General ApplicationsASTM A242/A242M-04 ? ? ? ? 高强度低合金结构钢? ? ? ? Standard Specification for High-Strength Low-Alloy Structural SteelASTM A247-67(1998) ? ? ? ? 铁铸件中石墨显微结构评定试验方法? ? ? ? Standard Test Method for Evaluating the Microstructure of Graphite in Iron CastingsASTM A249/A249M-04 ? ? ? ? 锅炉、过热器、换热器和冷凝器用焊接奥氏体钢管? ? ? ? Standard Specification for Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser TubesASTM A250/A250M-04 ? ? ? ? 锅炉和过热器用电阻焊铁素体合金钢管? ? ? ? Standard Specification for Electric-Resistance-Welded Ferritic Alloy-Steel Boiler and Superheater TubesASTM A252-98(2002) ? ? ? ? 焊接钢和无缝钢管桩? ? ? ? Standard Specification for Welded and Seamless Steel Pipe PilesASTM A254-97(2002) ? ? ? ? 铜焊钢管规格? ? ? ? Standard Specification for Copper-Brazed Steel TubingASTM A255-02 ? ? ? ? 测定钢淬透性用末端淬火试验的标准试验方法? ? ? ? Standard Test Method for Determining Hardenability of SteelASTM A262-03 ? ? ? ? 奥氏体不锈钢晶间浸蚀敏感性的检测? ? ? ? Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless SteelsASTM A263-03 ? ? ? ? 耐腐蚀铬钢包覆板材,薄板材及带材技术规范? ? ? ? Standard Specification for Stainless Chromium Steel-Clad PlateASTM A264-03 ? ? ? ? 包覆的不锈铬镍钢板,薄板及带材规格? ? ? ? Specification for Stainless Chromium-Nickel Steel-Clad PlateASTM A265-03 ? ? ? ? 镍和镍基合金包覆钢板规格? ? ? ? Standard Specification for Nickel and Nickel-Base Alloy-Clad Steel PlateASTM A266/A266M-03a ? ? ? ? 压力容器部件用碳素钢锻件规格? ? ? ? Standard Specification for Carbon Steel Forgings for Pressure Vessel ComponentsASTM A268/A268M-04 ? ? ? ? 一般设备用无缝和焊接铁素体与马氏体不锈钢管? ? ? ? Standard Specification for Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General ServiceASTM A269-04 ? ? ? ? 一般设备用无缝和焊接奥氏体不锈钢管? ? ? ? Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing for General ServiceASTM A270-03a ? ? ? ? 卫生设施用无缝钢和焊接奥氏体不锈钢管? ? ? ? Standard Specification for Seamless and Welded Austenitic Stainless Steel Sanitary TubingASTM A275/A275M-98(2003) ? ? ? ? 钢锻件的磁粉检查试验方法? ? ? ? Standard Test Method for Magnetic Particle Examination of Steel ForgingsASTM A276-04 ? ? ? ? 不锈钢棒材和型材? ? ? ? Standard Specification for Stainless Steel Bars and ShapesASTM A278/A278M-01 ? ? ? ? 适用于650F容压部件用灰铸铁件的技术规范? ? ? ? Standard Specification for Gray Iron Castings for Pressure-Containing Parts for Temperatures Up to 650°F (350°C) ASTM A283/A283M-03 ? ? ? ? 低和中等抗拉强度碳素钢板? ? ? ? Standard Specification for Low and Intermediate Tensile Strength Carbon Steel PlatesASTM A285/A285M-03 ? ? ? ? 压力容器用低和中等抗拉强度的碳素钢板? ? ? ? Standard Specification for Pressure Vessel Plates, Carbon Steel, Low- and Intermediate-Tensile StrengthASTM A288-91(2003) ? ? ? ? 涡轮发电机磁性定位环用碳素钢和合金钢锻件? ? ? ? Standard Specification for Carbon and Alloy Steel Forgings for Magnetic Retaining Rings for Turbine Generators标准号? ? ? ? 标准中文名称? ? ? ? 标准英文名称ASTM A289/A289M-97(2003) ? ? ? ? 发电机非磁性定位环用合金钢锻件的技术规范? ? ? ? Standard Specification for Alloy Steel Forgings for Nonmagnetic Retaining Rings for GeneratorsASTM A290-02 ? ? ? ? 减速器环用碳素钢和合金钢锻件? ? ? ? Standard Specification for Carbon and Alloy Steel Forgings for Rings for Reduction GearsASTM A291-03 ? ? ? ? 减速器小齿轮、齿轮和心轴用碳素钢和合金钢锻件? ? ? ? Standard Specification for Steel Forgings, Carbon and Alloy, for Pinions, Gears and Shafts for Reduction Gears ASTM A295-98 ? ? ? ? 高碳耐磨轴承钢技术规范? ? ? ? Standard Specification for High-Carbon Anti-Friction Bearing SteelASTM A297/A297M-97(2003) ? ? ? ? 一般用耐热铬铁与镍铬铁合金钢铸件规格? ? ? ? Standard Specification for Steel Castings, Iron-Chromium and Iron-Chromium-Nickel, Heat Resistant, for General ApplicationASTM A299/A299M-04 ? ? ? ? 压力容器用锰硅碳钢板? ? ? ? Standard Specification for Pressure Vessel Plates, Carbon Steel, Manganese-SiliconASTM A302/A302M-03 ? ? ? ? 压力容器用锰钼和锰钼镍合金钢板? ? ? ? Standard Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Molybdenum and Manganese-Molybdenum-Nickel ASTM A304-04 ? ? ? ? 有末端淬火淬透性要求的合金钢棒材的技术规范? ? ? ? Standard Specification for Carbon and Alloy Steel Bars Subject to End-Quench Hardenability RequirementsASTM A307-04 ? ? ? ? 抗拉强度为60000psi的碳素钢螺栓和螺柱的技术规范? ? ? ? Standard Specification for Carbon Steel Bolts and Studs, 60 000 PSI Tensile StrengthASTM A308/A308M-03 ? ? ? ? 经热浸处理镀有铅锡合金的薄板材的技术规范? ? ? ? Standard Specification for Steel Sheet, Terne (Lead-Tin Alloy) Coated by the Hot-Dip ProcessASTM A309-01 ? ? ? ? 用三点试验法测定长镀锌薄钢板镀层的重量成分的试验方法? ? ? ? Standard Test Method for Weight and Composition of Coating on Terne Sheet by the Triple-Spot TestASTM A311/A311M-04 ? ? ? ? 有机械性能要求的消除应力的冷拉碳素钢棒? ? ? ? Standard Specification for Cold-Drawn, Stress-Relieved Carbon Steel Bars Subject to Mechanical Property Requirements ASTM A312/A312M-04a ? ? ? ? 无缝和焊接奥氏体不锈钢管? ? ? ? Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel PipesASTM A313/A313M-03 ? ? ? ? 不锈钢弹簧丝技术规范? ? ? ? Standard Specification for Stainless Steel Spring WireASTM A314-97(2002) ? ? ? ? 锻造用不锈及耐热钢坯及钢棒规格? ? ? ? Standard Specification for Stainless Steel Billets and Bars for ForgingASTM A319-71(2001) ? ? ? ? 高温无压部件用灰铁铸件? ? ? ? Standard Specification for Gray Iron Castings for Elevated Temperatures for Non-Pressure Containing PartsASTM A320/A320M-04 ? ? ? ? 低温用合金钢螺栓材料规格? ? ? ? Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for Low-Temperature ServiceASTM A321-90(2001) ? ? ? ? 经淬火和回火的碳素钢棒? ? ? ? Standard Specification for Steel Bars, Carbon, Quenched and TemperedASTM A322-91(2001)e1 ? ? ? ? 合金钢棒材.级别? ? ? ? Standard Specification for Steel Bars, Alloy, Standard GradesASTM A323-93(2000) ? ? ? ? 硼铁规格? ? ? ? Standard Specification for FerroboronASTM A324-73(2000) ? ? ? ? 钛铁合金? ? ? ? Standard Specification for FerrotitaniumASTM A325-04a ? ? ? ? 经热处理最小抗拉强度为120/105ksi的热处理钢结构螺栓? ? ? ? Standard Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength ASTM A325M-04a ? ? ? ? 经热处理最小抗拉强度为830Mpa的热处理钢结构螺栓? ? ? ? Standard Specification for Structural Bolts, Steel, Heat Treated 830 Mpa Minimum Tensile Strength [Metric] ASTM A327-91(1997) ? ? ? ? 铸铁冲击试验方法? ? ? ? Standard Test Methods for Impact Testing of Cast IronsASTM A327M-91(1997) ? ? ? ? 铸铁冲击试验方法(米制)? ? ? ? Standard Test Methods for Impact Testing of Cast Irons (Metric)ASTM A328/A328M-03 ? ? ? ? 薄钢板桩? ? ? ? Standard Specification for Steel Sheet Piling ASTM A333/A333M-04a ? ? ? ? 低温用无缝与焊接钢管规格? ? ? ? Standard Specification for Seamless and Welded Steel Pipe for Low-Temperature ServiceASTM A334/A334M-04a ? ? ? ? 低温设备用无缝与焊接碳素和合金钢管? ? ? ? Standard Specification for Seamless and Welded Carbon and Alloy-Steel Tubes for Low-Temperature ServiceASTM A335/A335M-03 ? ? ? ? 高温用无缝铁素体合金钢管? ? ? ? Standard Specification for Seamless Ferritic Alloy-Steel Pipe for High-Temperature ServiceASTM A336/A336M-03a ? ? ? ? 压力与高温部件用合金钢锻件规格? ? ? ? Standard Specification for Alloy Steel Forgings for Pressure and High-Temperature PartsASTM A338-84(2004) ? ? ? ? 铁路,船舶和其他重型装备在温度达到650华氏度(345摄氏度)时使用的可锻铸铁法兰,管件和阀门零件? ? ? ? Standard Specification for Malleable Iron Flanges, Pipe Fittings, and Valve Parts for Railroad, Marine, and Other Heavy Duty Service at Temperatures Up to 650°F (345°C)ASTM A340-03a ? ? ? ? 有关磁性试验用符号和定义的术语? ? ? ? Standard Terminology of Symbols and Definitions Relating to Magnetic TestingASTM A341/A341M-00 ? ? ? ? 用直流磁导计和冲击试验法测定材料的直流磁性能的试验方法? ? ? ? Standard Test Method for Direct Current Magnetic Properties of Materials Using D-C Permeameters and the Ballistic Test MethodsASTM A342/A342M-99 ? ? ? ? 磁铁材料导磁率的试验方法? ? ? ? Standard Test Methods for Permeability of Feebly Magnetic MaterialsASTM A343/A343M-03 ? ? ? ? 在电力频率下用瓦特计-安培计-伏特计法(100-1000赫兹)和25 厘米艾普斯亭(EPSTEIN) 机架测定材料的交流电磁性能的试验方法? ? ? ? Standard Test Method forAlternating-Current Magnetic Properties of Materials at Power Frequencies UsingWattmeter-Ammeter-Voltmeter Method and 25-cm Epstein Test FrameASTM A345-98 ? ? ? ? 磁设备用平轧电炉钢? ? ? ? Standard Specification for Flat-Rolled Electrical Steels for Magnetic ApplicationsASTM A348/A348M-00 ? ? ? ? 用瓦特计--安培计--伏特计法(100-10000赫兹)和25厘米艾普斯亭框测定材料的交流磁性能的试验方法? ? ? ? Standard Test Method for Alternating Current Magnetic Properties of Materials Using the Wattmeter-Ammeter-Voltmeter Method, 100 to 10 000 Hz and 25-cm Epstein FrameASTM A350/A350M-04 ? ? ? ? 要求进行缺口韧性试验的管道部件用碳素钢与低合金钢锻件技术规范? ? ? ? Standard Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping ComponentsASTM A351/A351M-03 ? ? ? ? 容压零件用奥氏体及奥氏体铁素体铸铁的技术规范? ? ? ? Standard Specification for Castings, Austenitic, Austenitic-Ferritic (Duplex), for Pressure-Containing PartsASTM A352/A352M-03 ? ? ? ? 低温受压零件用铁素体和马氏体钢铸件规格? ? ? ? Standard Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing Parts, Suitable for Low-Temperature ServiceASTM A353/A353M-93(1999) ? ? ? ? 压力容器用经二次正火及回火处理的含9%镍的合金钢板? ? ? ? Standard Specification for Pressure Vessel Plates, Alloy Steel, 9 Percent Nickel,Double-Normalized and TemperedASTM A354-04 ? ? ? ? 淬火与回火合金钢螺栓,双头螺栓及其他外螺纹紧固件规格? ? ? ? Standard Specification for Quenched and Tempered Alloy Steel Bolts, Studs, and Other Externally Threaded FastenersASTM A355-89(2000) ? ? ? ? 渗氮用合金钢棒? ? ? ? Standard Specification for Steel Bars, Alloys, for NitridingASTM A356/A356M-98(2003) ? ? ? ? 蒸汽轮机用厚壁碳素钢、低合金钢和不锈钢铸件? ? ? ? Standard Specification for Steel Castings, Carbon, Low Alloy, and Stainless Steel, Heavy-Walled for Steam TurbinesASTM A358/A358M-04 ? ? ? ? 高温用电熔焊奥氏体铬镍合金钢管? ? ? ? Standard Specification for Electric-Fusion-Welded Austenitic Chromium-Nickel Stainless Steel Pipe for High-Temperature Service and General ApplicationsASTM A363-03 ? ? ? ? 地面架空线用镀锌钢丝绳? ? ? ? Standard Specification for Zinc-Coated (Galvanized) Steel Overhead Ground Wire StrandASTM A367-60(1999) ? ? ? ? 铸铁的激冷试验方法? ? ? ? Standard Test Methods of Chill Testing of Cast IronASTM A368-95a(2000) ? ? ? ? 不锈钢和耐热钢丝绳的标准? ? ? ? Standard Specification for Stainless Steel Wire StrandASTM A369/A369M-02 ? ? ? ? 高温用锻制和镗孔碳素钢管和铁素体合金钢管? ? ? ? Standard Specification for Carbon and Ferritic Alloy Steel Forged and Bored Pipe for High-Temperature ServiceASTM A370-03a ? ? ? ? 钢制品机械测试的标准试验方法和定义? ? ? ? Standard Test Methods and Definitions for Mechanical Testing of Steel Products标准号? ? ? ? 标准中文名称? ? ? ? 标准英文名称ASTM A372/A372M-03 ? ? ? ? 薄壁压力容器用碳素钢及合金钢锻件? ? ? ? Standard Specification for Carbon and Alloy Steel Forgings for Thin-Walled Pressure VesselsASTM A376/A376M-02a ? ? ? ? 高温中心站用无缝奥氏钢管? ? ? ? Standard Specification for Seamless Austenitic Steel Pipe for High-Temperature Central-Station ServiceASTM A377-03 ? ? ? ? 球墨铸铁压力管规范索引? ? ? ? Standard Index of Specifications for Ductile-Iron Pressure PipeASTM A380-99e1 ? ? ? ? 不锈钢零件、设备和系统的清洗和除垢? ? ? ? Standard Practice for Cleaning, Descaling, and Passivation of Stainless Steel Parts, Equipment, and SystemsASTM A381-96(2001) ? ? ? ? 高压输送用金属弧焊钢管? ? ? ? Standard Specification forMetal-Arc-Welded Steel Pipe for Use With High-Pressure Transmission SystemsASTM A384/A384M-02 ? ? ? ? 防止钢组件热浸镀锌时翘曲和扭曲用安全保护? ? ? ? Standard Practice for Safeguarding Against Warpage and Distortion During Hot-Dip Galvanizing of Steel Assemblies ASTM A385-03 ? ? ? ? 提供高质量镀锌覆层(热浸)? ? ? ? Standard Practice for Providing High-Quality Zinc Coatings (Hot-Dip)ASTM A387/A387M-03 ? ? ? ? 压力容器用铬钼合金钢板? ? ? ? Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-MolybdenumASTM A388/A388M-03 ? ? ? ? 重型钢锻件超声波检测? ? ? ? Standard Practice for Ultrasonic Examination of Heavy Steel ForgingsASTM A389/A389M-03 ? ? ? ? 适合高温受压部件用经特殊热处理的合金钢铸件规格? ? ? ? Standard Specification for Steel Castings, Alloy, Specially Heat-Treated, for Pressure-Containing Parts, Suitable for High-Temperature ServiceASTM A390-95(2001) ? ? ? ? 饲养家禽用镀锌钢丝栏栅网(六角形和直线形)? ? ? ? Standard Specification for Zinc-Coated (Galvanized) Steel Poultry Fence Fabric (Hexagonal and Straight Line)ASTM A391/A391M-01 ? ? ? ? 80号合金钢链条? ? ? ? Standard Specification for Grade 80 Alloy Steel ChainASTM A392-03 ? ? ? ? 镀锌钢丝链环栏栅网? ? ? ? Standard Specification for Zinc-Coated Steel Chain-Link Fence FabricASTM A394-04 ? ? ? ? 传动塔架用镀锌和裸露钢螺栓? ? ? ? Standard Specification for Steel Transmission Tower Bolts, Zinc-Coated and BareASTM A395/A395M-99e1 ? ? ? ? 高温用铁素体球墨铸铁受压铸件? ? ? ? Standard Specification for Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated TemperaturesASTM A400-69(2000) ? ? ? ? 钢棒的成分及机械性能选择指南? ? ? ? Standard Practice for Steel Bars, Selection Guide, Composition, and Mechanical PropertiesASTM A401/A401M-03 ? ? ? ? 铬硅合金钢丝? ? ? ? Standard Specification for Steel Wire, Chromium-Silicon AlloyASTM A403/A403M-04 ? ? ? ? 锻制奥氏体不锈钢管配件? ? ? ? Standard Specification for Wrought Austenitic Stainless Steel Piping FittingsASTM A407-93(2004) ? ? ? ? 盘簧用冷拉钢丝? ? ? ? Standard Specification for Steel Wire, Cold-Drawn, for Coiled-Type SpringsASTM A409/A409M-01 ? ? ? ? 腐蚀场所或高温下使用的焊接大口径奥氏体钢管? ? ? ? Standard Specification for Welded Large Diameter Austenitic Steel Pipe for Corrosive or High-Temperature ServiceASTM A411-03 ? ? ? ? 镀锌低碳钢铠装线? ? ? ? Standard Specification for Zinc-Coated (Galvanized) Low-Carbon Steel Armor WireASTM A413/A413M-01 ? ? ? ? 碳素钢链? ? ? ? Standard Specification for Carbon Steel Chain ASTM A414/A414M-04 ? ? ? ? 压力容器用碳素薄钢板? ? ? ? Standard Specification for Steel, Sheet, Carbon, for Pressure VesselsASTM A416/A416M-02 ? ? ? ? 预应力混凝土用无涂层七股钢铰线? ? ? ? Standard Specification for Steel Strand, Uncoated Seven-Wire for Prestressed ConcreteASTM A417-93(2004) ? ? ? ? 之字形、方形、正弦形家具用弹簧元件用冷拔钢丝? ? ? ? Standard Specification for Steel Wire, Cold-Drawn, for Zig-Zag, Square-Formed, and Sinuous-Type Upholstery Spring UnitsASTM A418-99(2003) ? ? ? ? 涡轮机及发电机钢转子锻件的超声波检查方法? ? ? ? Standard Test Method for Ultrasonic Examination of Turbine and Generator Steel Rotor ForgingsASTM A420/A420M-04 ? ? ? ? 低温下用锻制碳素钢和合金钢管配件? ? ? ? Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature ServiceASTM A421/A421M-02 ? ? ? ? 预应力混凝土用无涂层消除应力钢丝的技术规范? ? ? ? Standard Specification for Uncoated Stress-Relieved Steel Wire for Prestressed ConcreteASTM A423/A423M-95(2000) ? ? ? ? 无缝和电焊低合金钢管? ? ? ? Standard Specification for Seamless and Electric-Welded Low-Alloy Steel TubesASTM A424-00 ? ? ? ? 搪瓷用钢薄板? ? ? ? Standard Specification for Steel, Sheet, for Porcelain EnamelingASTM A426/A426M-02 ? ? ? ? 高温用离心铸造的铁素体合金钢管? ? ? ? Standard Specification for Centrifugally Cast Ferritic Alloy Steel Pipe for High-Temperature ServiceASTM A427-02 ? ? ? ? 冷轧和热轧用锻制合金钢辊? ? ? ? Standard Specification for Wrought Alloy Steel Rolls for Cold and Hot ReductionASTM A428/A428M-01 ? ? ? ? 钢铁制品上铝覆层重量的测试方法? ? ? ? Standard Test Method for Weight [Mass] of Coating on Aluminum-Coated Iron or Steel ArticlesASTM A434-04 ? ? ? ? 热轧与冷精轧经回火及淬火的合金钢棒? ? ? ? Standard Specification for Steel Bars, Alloy, Hot-Wrought or Cold-Finished, Quenched and TemperedASTM A435/A435M-90(2001) ? ? ? ? 钢板的直射束纵向超声波检验? ? ? ? Standard Specification for Straight-Beam Ultrasonic Examination of Steel PlatesASTM A436-84(2001) ? ? ? ? 奥氏体灰口铁铸件? ? ? ? Standard Specification for Austenitic Gray Iron CastingsASTM A437/A437M-01a ? ? ? ? 高温用经特殊处理的涡轮型合金钢螺栓材料? ? ? ? Standard Specification for Alloy-Steel Turbine-Type Bolting Material Specially Heat Treated for High-Temperature ServiceASTM A439-83(1999) ? ? ? ? 奥氏体可锻铸铁铸件? ? ? ? Standard Specification for Austenitic Ductile Iron CastingsASTM A447/A447M-93(2003) ? ? ? ? 高温用镍铬铁合金钢铸件(25-12级)? ? ? ? Standard Specification for Steel Castings, Chromium-Nickel-Iron Alloy (25-12 Class), for High-Temperature Service ASTM A449-04a ? ? ? ? 经淬火和回火的钢螺栓和螺柱? ? ? ? Standard Specification for Quenched and Tempered Steel Bolts and StudsASTM A450/A450M-04 ? ? ? ? 碳素钢管、铁素体合金钢管及奥氏体合金钢管? ? ? ? Standard Specification for General Requirements for Carbon, Ferritic Alloy, and Austenitic Alloy Steel TubesASTM A451/A451M-02 ? ? ? ? 高温用离心铸造的奥氏体钢管? ? ? ? Standard Specification for Centrifugally Cast Austenitic Steel Pipe for High-Temperature ServiceASTM A453/A453M-03 ? ? ? ? 具有同奥氏体钢相类似的膨胀系数、屈服强度为50-120Ksi(345-827MPa)的耐高温螺栓材料? ? ? ? Standard Specification for High-Temperature Bolting Materials, with Expansion Coefficients Comparable to Austenitic Stainless SteelsASTM A455/A455M-03 ? ? ? ? 压力容器用高强度碳锰钢板? ? ? ? Standard Specification for Pressure Vessel Plates, Carbon Steel, High-Strength ManganeseASTM A456/A456M-99(2003) ? ? ? ? 大型曲轴锻件的磁粉检查? ? ? ? Standard Specification for Magnetic Particle Examination of Large Crankshaft ForgingsASTM A459-97(2003) ? ? ? ? 镀锌平轧扁钢铠装带? ? ? ? Standard Specification for Zinc-Coated Flat Steel Armoring TapeASTM A460-94(2004)e1 ? ? ? ? 包铜钢丝绳标准? ? ? ? Standard Specification for Copper-Clad Steel Wire StrandASTM A463/A463M-02a ? ? ? ? 热浸镀铝薄钢板? ? ? ? Standard Specification for Steel Sheet, Aluminum-Coated, by the Hot-Dip ProcessASTM A466/A466M-01 ? ? ? ? 非焊接碳素钢链? ? ? ? Standard Specification for Weldless Chain ASTM A467/A467M-01 ? ? ? ? 机器链和盘旋链? ? ? ? Standard Specification for Machine and Coil Chain标准号? ? ? ? 标准中文名称? ? ? ? 标准英文名称。

NIJ 0101 06 防弹衣标准 中文

NIJ 0101 06 防弹衣标准 中文

NIJ 0101 06 防弹服防弹性能标准NIJ Standard:Ballistic Resistance of Body Armor美国司法部司法程序办公室2008年7月前言本项NIJ 0101 06《防弹服防弹性能》标准文件是美国全国司法学会(NIJ)与美国全国标准和技术学会(NIST)下属的执法标准办公室(OLES)协作的产物。

它构成美国司法部司法程序办公室下属的全国司法学会的标准和试验程序的一部分。

这是一项技术标准,规定了设备必须达到的能够满足刑事审判机构需要的最低性能要求,以及测试性能应当采用的方法。

NIJ自愿参与的防弹服验证试验计划(CTP)采用本标准确定防弹服型号是否满足最低性能要求,以便将该型号纳入NIJ验证产品目录。

此外,制造商、刑事审判机构和其他人可以用本标准描述的这些试验来确定某一特定设计的防弹服能否满足它们自己的要求。

积极鼓励用户按照NIJ防弹服验证试验计划(CTP)进行这些试验。

采购人员也可以参照本标准编制他们的采购文件,并且要求提供的设备满足或者超过这些要求。

本文件是份测试和性能标准,准确而又详尽地叙述了各种试验方法。

有关NIJ防弹服验证试验计划(CTP)参与单位的额外要求、过程和程序详见NIJ自愿参与的防弹服验证试验计划(CTP)管理程序手册。

寻求防弹服选择和应用指导以及的人可以查阅最新修订版《NIJ 100 指南–人体防弹服的选择和应用指南》,这是单独出版的,用非技术性语言编写的,说明如何选择设备并达到采购人所需要的性能水平。

(摘译)目录前言常用符号和缩写1.目的和范围2.NIJ防弹服分类2.1IIA型(9 mm;0.40 S&W半自动手枪)2.2II型(9 mm;0.357 Magnum转轮手枪)2.3IIIA型(0.357 SIG手枪;0.44 Magnum转轮手枪)2.4III型(步枪)2.5IV型(步枪穿甲弹)2.6特殊类型3.0定义4.0样品要求和实验室配置4.1 试验样品4.1.1 柔性背心和夹克4.1.2 硬铠甲和插板4.1.3 附属防弹钢板4.1.4 制造工艺4.1.5 贴标签4.1.6 有可拆卸防弹钢板的铠甲支架4.1.7 有内装插件或创伤挡板的铠甲4.2 实验室配置与试验设备4.2.1 射程配置4.2.2 试验转盘和试验筒4.2.3 速度测量设备4.2.4 铠甲浸泡设备4.2.5 铠甲衬垫材料5. 柔性铠甲调整方案5.1目的和范围5.2试验前的参数5.2.1 铠甲的储藏5.2.2 试验前的校验5.2.3 试验条件5.3 实验室配置和试验设备5.3.1 一般性参数5.3.2 控制器5.3.3 试验中断5.3.4 调整程序6. 硬铠甲调整方案6.1 目的和范围6.2试验前的参数6.2.1 铠甲的储藏6.2.2 试验前的校验6.2.3 试验条件6.3 实验室配置和试验设备6.3.1 一般性参数6.3.2 控制器6.3.3 试验中断6.3.4 调整程序7. 防弹试验方法7.1 目的和范围7.2 试验顺序7.3 检查制造工艺7.3.1 铠甲支架和防弹钢板罩7.3.2 防弹钢板7.3.3 检查标签7.4 取样7.5 样品适应7.5.1 插件7.6 所有防弹试验的完美冲击要求7.6.1 枪弹到边的最小距离7.6.2 枪弹与枪弹的最小距离7.7 所有防弹试验衬垫材料准备和样品安装7.7.1 衬垫材料构架准备7.7.2 安装铠甲接受防弹试验7.8 穿孔和背面凹痕记号试验(P-BFS)7.8.1 枪弹位置标记7.8.2 铠甲浸泡7.8.3 穿孔和背面凹痕记号试验(P-BFS)的试验威胁7.8.4 试验持续时间7.8.5 枪弹数和铠甲样品数的要求7.8.6 特殊型号铠甲的穿孔和背面凹痕记号试验(P-BFS)7.8.7 附属防弹钢板的穿孔和背面凹痕记号试验(P-BFS)7.8.8 穿孔和背面凹痕记号试验(P-BFS)性能要求7.9 防弹极限性能(BL)测定试验7.9.1防弹极限性能(BL)试验次数和试验样品的要求7.9.2 试验程序要求7.9.3 衬垫材料调整7.9.4 成组数据列表7.9.5 防弹极限性能要求8. 参考文献附录A 可接受的手工装弹的枪弹附录B 常见特殊类型威胁附录C 铠甲尺寸样本附录D 背面凹痕记号数据的分析附录E 防弹极限性能数据的分析附录F 解释性材料NIJ 0101 06 防弹服防弹性能标准1.目的和范围本项标准的目的是建立防护枪弹的人体防弹服防弹性能的最低性能要求和试验方法。

NKK开关产品参数手册说明书

NKK开关产品参数手册说明书

B40I n d i c a t o r s A c c e s s o r i e s S u p p l e m e n t T a c t i l e sK e y l o c k sR o t a r i e s P u s h b u t t o n s I l l u m i n a t e d P B S l i d e sP r o g r a m m a b l eT o u c h T i l tT o g g l e sGeneral SpecificationsElectrical Capacity (Resistive Load)Power Level: 10A @ 125/250V AC for JWM & JWMW models; 10A @ 30V DC for JWMW;16A @ 125/250V AC for JWL & JWLW models; 5A @ 72V DC for telecommunication applicationsOther RatingsContact Resistance: 10 milliohms maximum for JWM & JWMW; 20 milliohms maximum for JWL & JWLWInsulation Resistance: 1,000 megohms minimum @ 500V DCDielectric Strength: 2,000V AC minimum between contacts for 1 minute minimum;4,000V AC minimum between contacts & case for 1 minute minimumMechanical Life: 25,000 operations minimum Electrical Life: 25,000 operations minimumNominal Operating Force: JWM & JWMW Single Pole 3.92N & Double Pole 7.84NJWL Single Pole 5.00N & Double Pole 10.00N; JWLW Double Pole 10.00NAngle of Throw: 26°Materials & FinishesRocker:Polyphenylene ether (UL94V-0) Contacts: JWM & JWMW: Silver alloy with silver plating Housing/Frame & Barrier: Polyamide (UL94V-0) JWL & JWLW: Silver alloy plus copper with Interior Seal for JWM & JWL:Polyphenylene sulfide (UL94V-0) silver plating Case/Base:Melamine (UL94V-0) Terminals: Brass with silver platingEnvironmental DataOperating Temperature Range: –25°C through +70°C (–13°F through +158°F) for JWM & JWL;–25°C through +85°C (–13°F through +185°F) for panel seal JWMW & JWLW modelsHumidity: 90 ~ 95% humidity for 96 hours @ 40°C (104°F)Vibration: 10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range & returningin 1 minute; 3 right angled directions for 2 hoursShock: 50G (490m/s 2) acceleration (tested in 6 right angled directions, with 5 shocks in each direction)Sealing: IP67 of IEC60529 standard for panel seal JWMW & JWLW models; dust resistant inner seal for othersInstallationSoldering Time & Temperature: Manual Soldering: See Profile A in Supplement section.Standards & CertificationsFlammability Standards: UL94V-0 for rocker, housing, seal & case/base of JWL, JWM, JWMW & JWLW models TV Ratings for UL & CSA: JWM (TV-5) Overload Test @ 120V AC for 50 operations:Steady State Current (rms) 7.5A; Minimum Inrush Current (peak) 111A.JWM (TV-5) Endurance Test @ 120V AC for 25,000 operations:Steady State Current (rms) 5A; Minimum Inrush Current (peak) 78A.JWL (TV-8) Overload Test @ 120V AC for 50 operations:Steady State Current (rms) 12A; Minimum Inrush Current (peak) 163A.JWL (TV-8) Endurance Test @ 120V AC for 25,000 operations:Steady State Current (rms) 8A; Minimum Inrush Current (peak) 117A.UL: File No. E44145JWM & JWMW models recognized at 10A @ 250V AC. JWMW recognized at 10A @ 30V DC. JWL & JWLW models recognized at 16A @ 250V AC; JWL at 5A @ 72V DC.Models below recognized only when ordered with marking on switch. JWMW: add “/U” to end of part number to order UL mark on switch; add “/CUL” to end of part number to order cULus mark on switch. JWL: add “/U-DC” to end of part number to request UL rating on DC rated switch.CSA: File No. 023535_0_000JWM & JWMW models certified at 10A @ 250V AC; JWL models certified at 16A @ 250V AC VDE: License No. 115674JWM models approved at steady state 5A, inrush 80A, resistive 10A, & motor load 6A all at 250V AC; JWL models approved at steady state inrush 128A, resistive 16A, & motor load 8A all at 250V AC.Note: JWM & JWL Double Pole, Single Throw models approved only with the international ON-OFF symbols on the actuator.8/3/17B41I n d i c a t o r s A c c e s s o r i e s S u p p l e m e n t T a c t i l e s K e y l o c k s R o t a r i e s P u s h b u t t o n s I l l u m i n a t e d P B S l i d e s P r o g r a m m a b l e T o g g l esT o u c hT i l t Distinctive CharacteristicsActual Size JWMIndustry’s first molded rocker with TV rating. Designed to handle large inrush current, with high electrical capacity of 10 and 16 Amps. JWM models certified for TV-5 rating and JWL models for TV-8 rating.JWMW and JWLW panel seal versions meet IP67 of IEC60529 Standards (similar to NEMA 4 and 6). Prominent external insulating barriers increase insulation resistance and dielectric strength. Uniquely constructed to break light contact welds.Increased electrical life with speciallydesigned plate to minimize contact bounce. Constructed for dust resistance with interior cover between actuator and contact area. Terminals are molded in and epoxy sealed to lock out flux, dust, and other contaminants. Solder lug/quick connect terminals can be used with connector.Housing and case of heat resistant resin meet UL94V-0 standard.B42I n d i c a t o r s A c c e s s o r i e s S u p p l e m e n tT a c t i l e sK e y l o c k s R o t a r i e sP u s h b u t t o n sI l l u m i n a t e d P BS l i d e sP r o g r a m m a b l eT o u c hT i l t T o g g l e sTYPICAL SWITCH ORDERING EXAMPLEDESCRIPTION FOR TYPICAL ORDERING EXAMPLEJWLW21RA1ABlack HousingDPSTON-NONE-OFF CircuitBlack Rocker Cap withInternational ON-OFF Symbolsin Horizontal Orientation16A @ 125/250V ACB43I n d i c a t o r sA c c e s s o r i e s S u p p l e m e n tT a c t i l e sK e y l o c k sR o t a r i e sP u s h b u t t o n sI l l u m i n a t e d P B S l i d e s P r o g r a m m a b l e T o g g l esT o u c hT i l tM Panel Seal Power Level 10A @ 125/250V AC Power Level 10A @ 125/250V AC Power Level16A @ 125/250V ACMW LRATINGSBARRIER TYPES & COLORSBarrier type designates that either AT217 (for JWM) orAT218 (for JWL) is factory assembled.Dimensions for barriers are shown in the Accessories section.RFlange/Housing Material: PolyamideFinish: MatteBarrier Material: Polyamide Finish: MatteNo-barrier type has a flat flange which is an integral part of the switch.No BarrierBWith BarrierABlackHGrayBIvoryBarrier Colors Available:JWMW and JWLW panel seal devices have exterior seal of acrylonitrile butadiene rubber covering the flange.Panel SealPower Level16A @ 125/250V ACLWJWM JWL JWM JWLCAP COLORSCap Material: Polyphenelene Oxide Finish: MatteRocker cap is an integral part of the switch and not available separately.JWMW and JWLW available with black or red caps only.BlackIvoryRedGrayCap ColorsAvailable:ABCHB44I n d i c a t o r sA c c e s s o r i e sS u p p l e m e n tT a c t i l e sK e y l o c k sR o t a r i e sP u s h b u t t o n s I l l u m i n a t e d P BS l i d e sP r o g r a m m a b l eT o u c hT i l t T o g g l e sTERMINALSJWMWBlackIvoryABHINSCRIPTIONSInscription forHorizontal MountingDPST models without inscriptions do not have VDE approval.Inscription for Vertical MountingThe IEC symbols for On-Off are supplied with Single Throw models only.Orientation of inscription must be selected.Inscription Colors: Black ink on Ivory or Gray cap. White ink on Black or Red cap.Contact factory for other inscriptions.12No InscriptionNo CodeJWM & JWMWMaterial: Polyamide Finish: MatteColors Available:JWMW and JWLW panel seal models available with black housing only.HOUSINGGrayJWL & JWLWThk = (0.5).020.024.026Thk = (0.8) .031JWMPanel Thickness RangeWithout Barrier (JWM & JWMW):.039” ~ .157” (1.0mm ~ 4.0mm)With Barrier (JWM):.024” ~ .126” (0.6mm ~ 3.2mm)PANEL CUTOUTSSolder Lug/Quick Connect .110” (2.8mm)Solder Lug/Quick Connect .187” (4.75mm)Panel Thickness RangeWithout Barrier (JWL & JWLW):.039” ~ .157” (1.0mm ~ 4.0mm)With Barrier (JWL):.024” ~ .126” (0.6mm ~ 3.2mm)JWLWJWLB45I n d i c a t o r sA c c e s s o r i e sS u p p l e m e n t T a c t i l e sK e y l o c k sR o t a r i e s P u s h b u t t o n s I l l u m i n a t e d P B S l i d e s P r o g r a m m a b l e T o g g l esT o u c h T i l t TYPICAL SWITCH DIMENSIONS FOR JWM & JWMWJWM11RC1AJWMW22RCASingle & Double Pole With Barrier • 10 AmpSingle & Double Pole Panel Seal • No Barrier • 10 AmpJWM11BCA-HSingle & Double PoleNo Barrier • 10 AmpSingle pole double throw models do not have terminals 2a, 2, & 2b; single throw models do not have 1a & 2a.B46I n d i c a t o r sA c c e s s o r i e s S u p p l e m e n tT a c t i l e sK e y l o c k sR o t a r i e sP u s h b u t t o n sI l l u m i n a t e d P BS l i d e sP r o g r a m m a b l eT o u c hT i l tT o g g l e sTYPICAL SWITCH DIMENSIONS FOR JWL & JWLWWith Barrier • 16 AmpSingle & Double PoleJWL11BCA-HSingle pole double throw models do not have terminals 2a, 2, & 2b; single throw models do not have 1a & 2a.Panel Seal • 16 Amp • InscriptionDouble Pole Single ThrowJWLW21RA1AJWL21RC2A Single pole double throw models do not have terminals 2a, 2, & 2b; single throw models do not have 1a & 2a.No Barrier • 16 AmpSingle & Double PoleB47I n d i c a t o r s A c c e s s o r i e s S u p p l e m e n t T a c t i l e s K e y l o c k sR o t a r i e s P u s h b u t t o n s I l l u m i n a t e d P B S l i d e s P r o g r a m m a b l e T o g g l esT o u c hT i l t OPTIONAL DUST COVERTop Side BottomAssembly Instructions:1. Insert bottom of switch through the base untilthe tabs lock into place.2. Snap the switch into the panel.3. Seat the lid into the grooves of the base .Notes1. The dust cover is not for use with JWLW.2. The dust cover cannot be used with the barrier option.AT4126Dust Cover for JWL RockerWhen installed, the Dust Cover protects the switch from an environment containing small particles and dust. The switch is operable with the Dust Cover in place.Materials:Recommended Temperature Range:Lid: Clear Polyvinyl Chloride –10° ~ +70°C (+14°F ~ +158°F)Base: Black PolyamideLoses pliability below 0°C (+32°F)Recommended Panel Thickness:.031” ~ .134” (0.8mm ~ 3.4mm)LidBaseTYPICAL SWITCH DIMENSIONS FOR JWLWDouble Pole Double ThrowPanel Seal • 16 Amp • No InscriptionJWLW22RAAB48I n d i c a t o r s A c c e s s o r i e s S u p p l e m e n t T a c t i l e s K e y l o c k sR o t a r i e sP u s h b u t t o n s I l l u m i n a t e d P BS l i d e s P r o g r a m m a b l eT o u ch T i l t T o g g l e sPRECAUTIONS FOR HANDLING & STORAGE FOR JWMW/LW (PANEL SEAL TYPES)Operating Environment• Do not actuate switch if submerged in water or oil.• water may occur. In such an environment, a minimum 30° angle installation is advisable. If there is a possibility of freezing, install vertically so no moisture will be retained within switch housing.Panel Mounting• After mounting a switch, be sure there are no gaps between switch and panel. Lightly push into panel.• After installing into panel, do not apply excessive force.• After panel installation and wiring is completed, do not apply force horizontally or vertically from behind panel.corners of cutout to prevent level mounting.。

DAGE XD7800NT Ruby XL X-ray Inspection System 说明书

DAGE XD7800NT Ruby XL X-ray Inspection System 说明书

B G A w i t h O p e n J o i n t sXD7800NT Ruby XL X-ray Inspection SystemAdvantagesD AGE NT500 Maintenance-Free, Sealed-Transmissive X-ray Tube< 0.5 μm Feature Recognition160 kV Tube with Up to 10 W Target Power - Always Retains Sub-Micron AbilityD AGE 3 Mpixel @ 25fps Long Lifetime CMOS Flat Panel Detector with Real Time Image Enhancements G eometric Magnification 1,800 X, System 7,800 X for Total 23,400 X with Digital ZoomDAGE, the only x-ray company whose focus is on x-ray electronics inspection, offers the DAGE XD7800NT Ruby XL x-ray inspection system as the DAGE NT maintenance-free, sealed-transmissive x-ray tube, providing 0.5 μm feature The Solution for Large Board Applicationsall controlled through simple, joystick-free, ‘point and click’ operation, provides the safe, collision-free and high magnification inspection required for production applications. All these tasks can be simply 33” x 24.2” (840 x 615mm) Tray Size47” x 26.4” (1205 x 672 mm) Maximum Board Size with reduced Magnification70° Oblique Views without Loss of Magnification T wo 24” TFT LCD MonitorsAXiS - Active X-ray Image StabilizationNo Programming Skills Required for Automated Inspection TasksO ptions: X-Plane®; Joysticks For more information, speak with your Nordson representative or contact your Nordson regional officeAmericas+ 1 760 930 3307*********************Europe+44 1296 317800***************************China+86 512 6665 2008************************Germany+49 89 2000 338 270************************Japan+81 120 537 555************************Korea+82 31 462 9642***********************South East Asia+65 6552 7533************************Taiwan+886 2 2902 1860***************************United Kingdom+44 1296 317800***************************XD7800NT Ruby XL X-ray Inspection System Specifications• DAGE NT500 sealed-transmissive, filament-free x-ray tube:– < 0.5 μm feature recognition 30 - 160 kV for < 4 W target power– < 0.95 μm feature recognition when above 4 W target power– 10 W max. target power above 110 kV– automated tube stabilisation• 1,800 X geometric magnification (7,800 X system magnification)• 23,400 X total magnification including digital zoom• Easy, collision-free, high magnification inspection:– even at oblique angle views– joystick-free, ‘point and click’ operation• Tray size: 33” x 24.2” (840 x 615mm)• Maximum board size: 47” x 26.4” (1205 x 672 mm) with reduced magnification *Please refer to Dage for clarification for larger boards• Maximum inspection area: 33” x 24.2” (840 x 615mm)• 70° oblique angle views (over 30” x 24”, 762 x 610 mm):– for 360° around a point of interest– isocentric manipulator configuration keeps features in field of view • Long Lifetime CMOS digital detector with 1940 x 1530 pixels (3 Mpixels)– 25 fps full-frame ‘real time’ image acquisition– real time image enhancements• 16-bit digital image processing• AXiS - Active X-ray Image Stabilisation - anti-vibration control• Two off 24” TFT LCD operator display monitors• DAGE Image Wizard operating software including:– automated and manual component fault analysis including BGA & QFN– simple to create and use robust automated inspection routines– plated through hole (PTH) fill percentage calculation– accurate measurement functions– automated and manual die attach / area void calculation– patented1 X-ray navigation map for easy fault location– simple to use, no complicated joysticks required• Fully lead-shielded system safety cabinet– providing < 1 μSv/hr x-ray leakage– meets all international standards• 1 years system warrantyOptions• P atented X-Plane® 2• J oystick control (X,Y or X,Y & Z)• B arcode reader• 2nd Year warranty System• A pproximate Size: 94.5” x 98.5” x 81.5” (w x d x h)• A pproximate Size: 2400 x 2500 x 2070 mm (w x d x h)• A pproximate System Weight: 3000 kg (6600 lbs)• M aximum Sample Weight: 10 kg (22 lbs)• P ower: Single Phase 200 - 230Vac, 16A• M ax. P ower Consumption: 1000 W Max.• A ir: 4-6 bar of clean dry air for anti-vibration• O perating Temp. Range: 10 - 30ºC• H umidity: < 85% (non-condensing)1 EP 20632612 US 9129427 DS-RXL-110821。

  1. 1、下载文档前请自行甄别文档内容的完整性,平台不提供额外的编辑、内容补充、找答案等附加服务。
  2. 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
  3. 3、如文档侵犯您的权益,请联系客服反馈,我们会尽快为您处理(人工客服工作时间:9:00-18:30)。

房地产行业流动负债比率平均水平77% 海建设高达95%
752家公司流动负债单:90%负债经营会不会是压垮骆驼的最后稻草
135家公司的流动负债占负债总额的比率高达100%,所有的债务压力全部集中在眼前
一家盈利的公司,也会破产吗?
答案是肯定的。

试想一家公司当年有一定的盈利,但资产结构中流动负债要远远超过流动资本,如果盈利不足以弥补当期净负债额,公司将由于当期无法偿付流动负债而破产。

不同于资产小于负债的技术性破产,业内人士称之为“黑字破产”。

流动负债有如此之大的杀伤力,那么,为什么公司偏偏又对流动负债不设防呢?原因很简单,因为流动负债在公司的所有负债中属于成本最低的筹资方式。

于是,在低成本与稳健经营的抉择中,更多的公司甚至甘于冒着巨大的风险,选择较高的流动负债比率。

50%的上市公司流动负债占负债总额在90%以上
2007年上市公司已公布的1401家非金融类公司的年报充分印证了公司对于流动负债的偏爱。

其中,135家公司的流动负债占负债总额的比率高达100%,也就是说,这些公司选择的是完全采用流动负债的方式,因此,所有的债务压
力全部集中在眼前。

接下来的数字更让人捏了把汗,虽然未达到100%,但有163家公司的流动负债占总负债的99%以上,73家在98%以上,194家在95%以上,而达到90%以上的总共居然有752家。

1401家上市公司中,752家的流动负债超过负债总额的90%,即50%以上的公司有90%以上的债务都是流动负债,在2007年1401家非金融类上市公司的4.86万亿元的债务中,流动负债较高的前50%就有2.19万亿元的流动债务。

虽然不同行业以及同一行业中不同发展阶段的公司,并没有统一的标准。

然而,至少对于这752家流动负债占负债总额90%以上的公司,未来的财务压力不容忽视。

钟情于流动负债由来已久
当然,上市公司也不仅在2007年对流动负债情有独钟。

从某种意义上来说,目前我国企业偿债能力较弱,主要是短期的负债过度所致。

在1401家上市公司中,2006年短期负债率为100%的就有147家,2005年这一数字更是达到了228家。

同时,流动负债比率超过90%的公司在2006年和2005年分别为759家和821家。

由此可见,这个习惯由来已久。

记者进一步分析了3年来的平均水平,发现2005年到2007年间这1401家公司流动负债率的算术平均值分别为84.7%、85.3%和86.6%。

虽然80%以上的流动负债率让人触目惊心,
但单从数字来看,上市公司正逐步减少对流动负债的依赖。

行业特性决定负债结构
事实上,在分析流动负债占总负债的比率时,还需要考虑行业特征,并结合资产周转水平来考察。

一般而言,食品饮料、商业贸易、家用电器等行业出于自身特点,其短期负债比率都在90%以上,如果营运能力强,资产周转率较高,则流动负债所起到的作用更多是降低财务成本而非增加财
务压力。

房地产、建筑建材、有色金属等行业则更多地依赖于长期负债。

所以,流动负债压力的增加,将会对行业造成较大压力。

以房地产行业为例,2007年流动负债比率的行业平均水平为77.4%,万科A(000002.SZ)为73.7%,保利地产(600048行情,股吧)(600048.SH)为67.4%,金地集团(600383行情,股吧)(600383.SH)为66.4%,相比之下,这些行业龙头还是表现出了相当程度的稳健性。

而诸如陆家嘴(600663行情,股吧)(600663.SH)、泛海建设(000046行情,股吧)(000046.SZ)等公司,其高达95%左右的流动负债比率显然会对当期造成不小的负面影响。

暗藏杀机的长期债务
虽然长期负债不对当期还贷造成压力,但长期负债未必比流动负债安全。

事实上,长期债务是在转化为流动债务后才面临偿还问题,而如果当年到期的长期债务过多,短期内
的还款压力自然加剧。

在流动负债中就有这么一项“一年内到期的非流动负债”来衡量由上期的长期债务造成的本期还款压力。

从2006年到2007年,流动负债占比总负债的比例增幅最大的前20家公司,包括世博股份(002059行情,股吧)(002059.SZ)、ST东北高(600003行情,股吧)(600003.SH)、桂冠电力(600236行情,股吧)(600236.SH)等,都在不同程度上受到数额庞大的一年内到期的非流动负债的影响,造成当期财务压力骤增。

世博股份和ST东北高原本属于短期财务压力不大的公司,其2006年流动负债仅占总负债的40%左右,而2007年分别有5000万和4.5亿元的长期债务即将到期,导致当年流动负债比率猛增至95%以上。

(责任编辑:无计)。

相关文档
最新文档