杭州爱浦多科技网络监控摄像机IP100X系列说明书
IPS100使用手册
目录目录 (1)第一章前言 (3)第二章关于本产品 (4)关于IPS100 (4)本产品的使用环境 (4)包装内容 (4)各部件的名称和功能 (5)接口 (5)指示灯 (5)复位按键 (6)系统出厂配置 (6)第三章安装方法 (7)准备 (7)连接打印机 (7)连接网络线 (7)通电并检查指示灯 (7)管理员软件安装 (8)普通用户软件安装 (10)软件卸载 (12)第四章在Windows环境下进行网络打印 (13)在Windows 2000/XP 环境下用TCP/IP 协议打印 (13)确认PC的网络设置 (13)设置本产品 (14)搜索 (14)选择 (15)设置IP地址 (15)确认 (16)使用RAW方式进行打印 (17)使用LPR方式进行打印 (24)使用SMB方式进行打印 (28)使用IPP方式进行打印 (31)第五章使用打印服务器管理工具 (33)系统要求 (33)软件安装 (33)软件操作 (33)第六章使用打印机状态监视工具 (43)软件安装 (43)软件操作 (43)第七章使用WWW浏览器 (45)启用WWW浏览器 (45)常规 (46)设置 (48)信息 (52)第八章常见问题及故障维修 (55)第一章 前言感谢您购买本公司的网络打印服务器。
这本使用手册详细地记述了本产品的设置及使用方法。
为了正确使用本产品，请仔细阅读本手册并注意保管。
本产品是10BASE-T/100BASE-T 自适应打印服务器，主要以TCP/IP (WindowsXP,Windows2000)协议为基础，实现多种网络打印服务协议。
本手册将指导使用的顾客如何设置并使用本产品。
【使用本手册的注意事项】未经本公司的许可，本使用手册不得转载或复制。
一经发现，将追究法律责任。
今后本使用手册内容变更时不再预告。
本使用手册本着尽全尽善宗旨编辑。
对于所使用的设置实例结果，本公司不负责任。
有关本产品的问题请与芯彩科技联系，芯彩科技全程服务热线电话：010-8289-6060。
IP公共观看监控器用户手册说明书
PVM24ZJ-OC3-4USER’S MANUALIP PUBLIC VIEW MONITORGVISION USA, INC 30398Esperanza,RanchoSantaMargaritaCA92688/949.586.3338/********************Important InformationCare and CleaningTO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO, DO NOT USE THIS UNIT’S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS UNLESS THE PRONGS CAN BE FULLY INSERTED.TO REDUCE THE RISK OF ELECTRIC SHOCK, MAKE SURE POWER CORD IS UNPLUGGED FROM WALL SOCKET. TO FULLY DISENGAGE THE POWER TO THE UNIT, PLEASE DISCONNECT THE POWER CORD FROM THE AC OUTLET. DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.This symbol warns user that uninsulated voltage within the unit may have sufficient magnitude to cause electric shock. Therefore, it is dangerous to make any kind of contact with any part inside this unit.This symbol alerts the user that important literature concerning the operation and maintenance of this unit has been included. Therefore, it should be read carefully in order to avoid any problems.CAUTION: Please use the power cord provided with this display in accordance with the table below. If a power cord is not supplied with this equipment, please contact GVISION. For all other cases, please use the power cord with the plug style that matches the power socket where the monitor is located. The compatible power cord corresponds to the AC voltage of the power outlet and has been approved by, and complies with, the safety standards in the country of purchase.*When operating this monitor with its AC 125-240V power supply, use a power supply cord that matches the power supply voltage of the AC power outlet being used.∙ Always unplug your monitor from the wall outlet before cleaning. Clean the LCD monitor surface with a lint-free, non-abrasive cloth. Avoid using any liquid, aerosol or glass cleaners.∙Slots and openings on the back or top of the cabinet are for ventilation. They must not be blocked or covered. Your monitor should never be placed near or over a radiator or heat source, or in a built-in installation unless proper ventilation is provided.∙Never push objects or spill liquid of any kind into this product.Safety Precautions / Maintenance▪Do not use this apparatus near water.▪Clean only with dry cloth.▪Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.▪Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.▪Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wideblade or the third prong are provided for your safety. Ifthe provided plug does not fit into your outlet, consult anelectrician for replacement of the obsolete outlet.▪Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and thepoint where they exit from the apparatus.▪Only use attachments/accessories specified by the manufacturer.▪Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the monitor combination to avoid injury from tip-over.▪Unplug monitor during lightning storms or when unused for long periods of time.▪Refer all servicing to qualified service personnel.Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects havefallen into the apparatus, the monitor has been exposedto rain or moisture, does not operate normally, or has been dropped.▪Do not press strongly upon the panel with a hand or a sharp object such as a nail, pencil, or pen, or make a scratch on it.▪Do not stick metal objects or any other conductive material into the power cord. Do not touch the end of the power cord while it is plugged in.▪Keep the packing anti-moisture material or vinyl packing out of the reach of children. Anti-moisture material is harmful if swallowed. If swallowed, induce vomiting and go to the nearest hospital. Additionally, vinyl packing can cause suffocation. Keep it out of thereach of children.▪Concerning the Power Cord (Can differ by country): Check the specification page of this owner’s manual tobe certain concerning current requirements. Do not connect too many devices to the same AC power outletas this could result in fire or electric shock. Do not overload wall outlets. Overloaded wall outlets, loose ordamaged wall outlets, extension cords, frayed powercords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire. Periodically examine the cord of your device, and if its appearance indicates damage ordeterioration, unplug it, discontinue use of the device, and have the cord replaced with an exact replacementpart by an authorized servicer. Protect the power cordfrom physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, andthe point where the cord exits the device. Do not movethe monitor with the power cord plugged in. Do not usea damaged or loose power cord. Be sure do grasp theplug when unplugging the power cord. Do not pull on the power cord to unplug the monitor.▪To reduce the risk of fire or electrical shock, do not expose this product to rain, moisture or other liquids. Donot touch the screen with wet hands. Do not install thisproduct near flammable objects such as gasoline or candles, or expose the TV to direct air conditioning.▪Do not use high voltage electrical equipment near the TV (e.g., a bug zapper). This may result in product malfunction.▪Do not expose to dripping or splashing and do not place objects filled with liquids, such as vases, cups, etc. onor over the apparatus (e.g., on shelves above the unit).▪Do not attempt to modify this product in any way without written authorization from GVISION. Unauthorized modification could void the user’s authority to operate this product.▪Moving: Make sure the product is turned off, unplugged, and all cables have been removed.▪If you smell smoke or other odors coming from the screen, unplug the power cord and contact an authorized service center.▪If water or another substance enters the product (like an AC adapter, power cord, or unit), disconnect the powercord and contact the service center immediately.Otherwise, this may result in fire or electric shock.Table of Contents1. Accessories (5)2. Installation (5)3. Control & Functions (6)4. Remote Control (7)5. Input Source (8)6. OSD Setup Under AV/ HDMI Input Mode (9)7. OSD Setup Under VGA Input Mode (14)8. Setup Under SD/ USB Input Mode (19)9. Care & Cleaning (19)10. Mounting Monitor on Wall (19)11. Camera Management (19)12. Specifications (20)13. Dimensions (21)PACKAGE OF CONTENTSLCD Monitor x1 RemoteControl x1 User’s Manual x1 PowerAdapter x1 Power Cord x1HDMI High Definition Multimedia InterfaceUSB / SDBuilt-in MPEG-2/MPEG-4/H.264/Real Media/AVS Video Decoder.**************************************************memory card capacity: Up to 32GB.Supported file types:AVI/MPG/MPEG/XVID/VOB/DAT/MP4/TS/M2TS/MKV/H.264/RM/RMVBIPC IP camera loop out, For some models may also support POECVBS OutIP camera video loop out via CVBS to make you can connect the PVM tosome old CVBS recording system. The CVBS output May not be available forsome models.VGA Connect device with a VGA output 15 pin D-sub cableDC Power input DC24V,Please check the following listed accessories before installation1AccessoriesRear InterfaceThis section describes the I/O on the back panel of the MONITOR. 2InstallationSOURCE MENU +-Turn on / off the monitorSOURCE Accesses the available video input signals (HDMI/ Camera/ Media)MENU Brings up the MONITOR Main menu. When in the OSD, press MENU button to return to the previous menu or exit+ Turn on the volume. In the MONITOR menu system, function like the right arrow button on the remote control and adjusts menu controls.-Turn down the volume. In the MONITOR menu system, function like the left arrow button on the remote control and adjust menu controls1 POWER ON/OFF the LCD monitor2 Press ‘SOURCE’ button to accesses the available video input signal menu, press ＋button select, press ‘SOURCE’ to enter the video mode3 Press MENU button then press ＋／－ button move highlight icon left / right.4 Press SOURCE button to enter the sub-menu ，then press ＋／－button correspondingly to change the setting5When the setting is done, press MENU button to return to the previous menu or exit3 Control & FunctionsIf you cannot locate your remote, you can use the side panel buttons of your monitor to operate the monitor’s features. (* Depends on the types or models, the OSD button may not available)How to Use ButtonsUse the buttons on the right side control panel to adjust the OSDMotion ControlTurn on or off the monitor Mute Turn on or off sound Lock OSD menu lock and unlock Menu Display the main menu ▲ Select Up ▼ Select Down◄ Volume Down/ Select Left ► Volume Up/ Select Right InfoDisplay information Motion Motion detection switch Exit Exit the Monitor OSD Source Source selection menu UnavailableDVRSpecial ControlsMedia Controls▲ Select Up ◄◄ Rewind ▼Select Down►► Forward ◄ Select Left ▲ Fast Rewind Speed / Up ► Select Right ▼ Fast Forward Speed / Down MENU OSD◄ Volume Down / Select Left OK Confirm Selection ► Volume Up / Select Right Exit Exit►IIPlay / PauseOK Confirm Selection ■Exit / Stop4 Remote ControlEnsure the remote control is pointed toward the IR receiver on the display. No obstacles should be placed between the remote control and the IR receiver. The effective receiving distance for the controller is 3 meters.Camera & DVR buttons of the remote controller is for backup use, not functional with this model.1. To ensure a normal operation, the remote control should not be droppedor damaged in any way. It should also be kept dry and away from all heat sources.2. Battery replacement is necessary when the remote controller acts inconsistently or stopsoperating the LCD display.5Input SourceChoose the input sourceIf you hope to show the video from the external input source, Before chose the right source in OSD, you need to connect the devices, otherwise, when you select the source ,the none or no signal will appears on the screen, Press source button on the monitor or remote control, the menu appears on the screen ,then press source to select the monitor item, and press“ +/- (>)”to enter it.HDMI : the input source from HDMI deviceVGA : the input source from VGACamera : the source from Built-in IP camera videoUSB/SD：Monitor built-in multimedia to display advertisement Video or PhotoThe PVM Can automatically switch between the Advertisement and Camera based on motion detection pls refer to the setting of the PVM Image mode>Motion. The PVM can also auto switch between different channel based on time, pls refer to the Image Mode setting>SwitchPICTUREPicture Mode Press “OK “button to select picture modes, then press the < or > button to select “Standard, Dynamic, Mild, or User”. Finally, press “Menu” button to exit.Color Temperature Press ”OK” button to Change the color intensity of the temperature Selected (Medium, Warm, Cool or User)，you could change “RGB”. Finally, press “Menu” button to exit.Aspect Ratio Press “OK “button to select picture scales, then press the “< or >“, button to select “4:3 or Full”. Finally, press “Menu” button to exit.Noise Reduction Press the “< or >“, button to select five kinds of settings (Low, Middle, High, Off and Default), then press “Menu” button to exit.OSD Setup under HDMI/AV Input Mode 6OSD SetupSOUNDSound ModePress “< or >” button to select sound modes, “Music, Movie, Sports,standard, or User”. Then, press “Menu” button to exit.BalanceAdjusts how much audio is sent to the left and right (-50 to +50). Theintermediate value is 0, when indication value of balance increasestoward +50, sound of the right and left speaker becomes stronger andweaker, respectively, when indication value of balance decreasetoward -50 sound of the right and left speaker becomes weaker andstronger. Press “OK “button,then press the “< or >” button to adjustsound of the right and left. Finally, press “Menu” button to exit.Mute Press “< or >” button to select ”On or Off”,Then, press “Menu” buttonto exit.OPTIONOSD LanguageThree are nine kinds of languages. Press “< or >” button to select thelanguages which you need. Finally, press “Menu” button to exit. OSD H/V Pos Press “< or >” button to set OSD position on the screen.OSD TimeoutPress “< or >” button to set the time that OSD disappear from thescreen.OSDTransparencyPress “< or >” button to set the OSD transparency. (Low, Middle, orHigh)Restore Factory Press “ >” button to Restore factory menu.Mirror H/VPress “< or >” button to select “On or Off”. Then the picture could flip(horizontally or Vertically).Backlight Press “< or >” button to set backlight. You have three sections: “High,Middle and Low”. Finally, press “Menu” button to exit.ADVANCEH/V-Start Press “< or >” button to set the over scan In this part. Finally, press “Menu” button to exit.H/V-SizePress “< or >” button to set the size of horizontal/ Vertical over-scan. Finally, press “Menu” button to exit.PVMImage ModePress “< or >” button to set image mode, there are three modes. (Off,Switch and Motion) Finally, press “Menu” button to exit. Switch meansthe monitor will auto switch the setting channel. Motion means themonitor will return to camera channel after motion is detected by thecamera.Motion TimeWhen you select the motion, you could set the motion time. Then pressmenu to exit.Motion time is the staying camera time with camera channel aftermotion disappear.Switch TimerWhen you select the switch mode, you could set the switch timer.There are three input sources, you could set the time for each sourcefrom 0 to 30 second. Finally, press “Menu” button to exit.Special ControlPress “>” button to set message select, message flicker and led flicker.And there are four modes in message select. And you could set on/offin the message flicker and led flicker. Finally, press “Menu” button toexit.PICTUREPicture ModeSelect your preferred color module Press “OK “button to select picture modes, then press the “< or >” button to select “ Standard, Dynamic, Mild or User”. Finally, press “Menu” button to exit.ColorTemperatureSelect your preferred color Temperature, Press ”OK” button to Change the color intensity of the temperature Selected (Medium, Warm, Cool or User), you could change “RGB”. Finally, press “Menu” button to exit. Aspect RatioChange the screen between 4:3 and 16:9, Press “OK “button to select picture scales, then press the “<or>“button to select “ 4:3 or Full” . Finally, press “Menu” button to exitNoise Reduction N/A.OSD Setup under VGA Input Mode7 OSD Setup (VGA)SOUNDSound Mode Press “< or >” button to select sound modes, “Music, Movie, Sports, standard or User” .Then, press “Menu” button to exit.Balance Adjusts how much audio is sent to the left and right ( -50 to +50). The intermediate value is 0, when indication value of balance increases toward +50, sound of the right and left speaker becomes stronger and weaker, respectively, when indication value of balance decrease toward -50 sound of the right and left speaker becomes weaker and stronger. Press “OK “button, then press the “< or >” button to adjust sound of the right and left. Finally, press “Menu” button to exitMute Press “< or >” button to select ”On or Off”,Then, press “Menu” buttonto exit.OPTIONOSD Language Three are nine kinds of languages. Press “< or >” button to select the languages which you need. Finally, press “Menu” button to exit.OSD H/V Pos Press “< or >” button to set OSD position on the screen.OSD Timeout Press “< or >” button to set the time that OSD disappear from the screen.OSD Transparency Press “< or >” button to set the OSD transparency. (Low, Middle, or High)Restore Factory Press “ >” button to Restore factory menu.Mirror H/V Press “< or >” button to select “On or Off”. Then the picture could flip (horizontally or Vertically).Backlight Press “< or >” button to set backlight. You have three sections: “High,Middle and Low”. Finally, press “Menu” button to exit.OPTIONAuto Adjust Press “>” button to adjust picture.Horizontal Pos.Press “< or >” button to change the figure (from 0 to 100), Then press menu to exit.Vertical Pos. Press “< or >” button to change the figure (from 0 to 100), Then press menu to exit.Clock Press “< or >” button to change the figure (from 0 to 100), Then press menu to exit.Phase Press “< or >” button to change the figure (from 0 to 100), Then press menu to exit.PVMImage Mode Press “< or >” button to set image mode, three are three modes. (Off, Switch and Motion) Finally, press “Menu” button to exit.Motion Time When you select the motion mode, you could set the motion time. When there is no motion detected for a defined second, the monitor will return to the previous channel.Switch Timer When you select the switch mode, you could set the switch timer. There are three input sources, you could set the time for each source from 0 to 30 second. Finally, press “Menu” button to exit.Special Ctrl Press “>” button to set message select, message flicker and led flicker. And there are four modes in message “RECORDING IN PROGRESS” or “WELCOME”. And you could set on/off in the message flicker and led flicker. And press “Menu” button to exit.FunctionPress the “< or >” button to select some functions. Forexample; ”PHOTO, MUSIC, MOVIE, TEXT”.The default priority auto play video.8 Setup Under SD Card / USB9 Care and CleaningCAUTION: Turn off your MONITOR before cleaning.You can clean the MONITOR as required, using a soft lint-free cloth. Be sure to occasionally dust the ventilation slots in the cabinet to help assure adequate ventilation.The Monitor’s screen may be cleaned with a soft, lint-free cloth as well. Take care not toscratch or mar the screen. If necessary, you may use a cloth dampened with warm water. While cleaning do not spray liquid directly on the screen, or allow liquid to run down the screen and inside the Monitor. Also, never place drinks or vases with water on top of the monitor. This could increase the risk of fire or shock hazard or damage to the monitor.10 Mounting Monitor to WallCAUTION : The wall mount must bear a minimum of five times. The monitor’s net weight without causing damage. To mount your MONITOR to the wall you need to purchase a VESA wall mount 100x100mm or 75x75mm, KM4x 8mm (100 x 100, for example, means the mounting measurements are 100mm horizontally and 100mm vertically; M4 x 8 mm is the types of screw that needs to be used).11 Camera SettingIf you want to access the IP camera OSD to change the setting including IP address, coloradjust, recording activity, etc. Pls log into the IP camera via web or the VMS software in the CD, the default IP address is Dynamic, and User name: admin / Password: admin12SpecificationsMODEL PVM24ZJ-OC3-4Screen Size 23.6Resolution 1920 x 1080Refresh 60Hz Brightness (MAX) 300cd/m²Response Time (Typical) 5msAspect Ratio 16:Contrast Ratio 1000:1Display Color 16.7M (8-bit)INTERFACEBNC CVBS In/Out 1 / 1HDMI In 1VGA In 1SD Slot 1RJ45 (PoE) 1USB 1 IP CAMREASensor 1/2.8" Sony ExmorResolution 1920x1080@25fpsLens 3.3-12mm Vari-focal IR CorrectedCABINETColor/Material Black/Metal POWERConsumption 40W / PoE Standard IEEE802.3bt/af/at 60W MaxElectrical Rating DC24V (AC 100V ~ 240V, 50/60Hz)TEMPERATUREOperating 0~50°C VESA™Mount Size 100 x 100mmSpecifications subject to change without any notice30398Esperanza,RanchoSantaMargaritaCA92688/Tel.949-586-3338/Fax.949-272-4594/**************************2113Dimensions。
高清网络摄像机用户手册
目录/Contents前言 (1)说明 (2)产品简介 (4)设备外观 (5)外观 (5)设备接口 (7)IPC112 (7)IPC110 (9)线缆连接 (9)IPC112 (9)IPC110 (10)IPC212 (11)IPC211 (11)安装及配置 (12)安装环境 (12)安装方法 (12)开始使用 (16)系统配置要求 (16)初始配置 (16)使用客户端IPCC TRL (17)产品功能 (19)视频浏览 (19)云台控制 (19)图像调节 (19)告警联动 (21)移动侦测 (21)并口告警 (22)图像遮蔽 (22)抓拍管理 (23)录像管理 (23)升级管理 (24)常见故障分析 (25)不能登录客户端 (25)登录IPCC TRL后不能正常浏览监控画面 (26)PC设备不能正常注册到NVR或KDM监控平台 (28)性能指标 (32)IPC112 (32)IPC110 (33)IPC212 (34)IPC211 (35)术语表 (36)PREFACE (1)IMPORTANT NOTES (2)INTRODUCTION (4)PRODUCT VIEWS (5)O VERVIEW (5)I NTERFACE &CONNECTOR (7)C ONNECT PERIPHERALS (9)INSTALLATION (12)G ENERAL E NVIRONMENT (12)M OUNTING (12)USING NETWORK CAMERA (16)S YSTEM R EQUIREMENT (16)F IRST C ONFIGURATION (16)U SING THE C LIENT -IPCC TRL (18)PRODUCT FEATURE (19)L IVE V IDEO (19)PTZ C ONTROL (19)A DJUSTING THE CAMERA AND IMAGE (19)A LARM T RIGGER (23)Motion Detection (23)Local Alarm Port (23)I MAGE S HIELD (24)SNAPSHOT MANAGEMENT (24)RECORD MANAGEMENT (25)UPDATE (26)TROUBLESHOOTING (27)C AN NOT ACCESS CLIENT (27)C AN NOT VIEW VIDEO STREAMING ON IPCC TRL (28)IPC CAN NOT BE REGISTERED WITH NVR OR KDM PLATFORM (31)SPECIFICATIONS (33)IPC112 (33)IPC110 (34)IPC212 (35)IPC211 (36)GLOSSARY (37)前言读者对象●工程安装人员●监控产品操作人员适用型号IPC112/IPC110/IPC212/IPC211相关手册《高清网络摄像机快速使用指南》《NVR管理员指南》我们尽最大努力来保证本手册信息的正确性，如因升级等原因发生信息修改，恕不另行通知。
飞利浦家用网络摄像机说明书
装箱清单包装清单：飞利浦家用网络摄像机x1说明书x1挂墙配件包 （塑料膨胀螺栓x3、 螺丝x3、 上墙底座x1、 小螺丝刀x1）电源适配器x1【温馨提示】 打开包装后请您确认主机是否完好，配件是否齐全。
飞利浦家用网络摄像机x1螺丝x3上墙底座x1小螺丝刀x1说明书x1电源适配器x1产品安装摄像机上墙安装，如图所示三个螺丝固定到墙壁上电后18秒左右，开始语音提示“等待连接，进入配网模式，开始配网”，即可给摄像机配网，如果没有提示，使用复位按键重置设备。
将电源线插入摄像机尾线的电源插孔，摄像机自动开机。
摄像机上电开机产品外观Wi-Fi天线广角镜头麦克风水平云台雨罩揭开盖子可见TF卡槽、 重置按钮喇叭天线夜视红外灯尊敬的客户：感谢您购买飞利浦的产品！请再使用本产品之前仔细阅读《使用说明书》，并按说明书要求正确操作。
四个螺丝打开，即可看到重置按钮TAI2000W/93售后服务与支持飞利浦家用网络摄像机产品保修条例飞利浦家用网络摄像机产品售后服务严格依据《中华人民共和国消费者权益保护法》、《中华人民共和国产品质量法》 实行售后三包服务，服务内容如下: 1.自您签收次日起7日内，本产品出现《产品性能故障表》所列性能故障的情况， 经由飞利浦售后服务中心检测确定， 可免费享受退货或换货服务;2.自您签收次日起8日-15日内，本产品出现《产品性能故障表》所列性能故障的情况，经由飞利浦售后服务中心检测确定，可免费享受换货或者维修服务; 3.自您签收次日起12个月内，本产品出现《产品性能故障表》所列性能故障的情况，经由飞利浦售后服务中心检测确定，可免费享受维修服务。
飞利浦家用网络摄像机产品非保修条例1.未经授权的维修、误用、碰撞、疏忽、滥用、进液、事故、改动、不正确的使用非本产品配件，或撕毁、涂改标贴、防伪标记;2.已超过三包有效期;3.因不可抗力造成的损坏;4.不符合《产品性能故障表》所列性能故障的情况;5.因人为原因导致摄像机及其配件产生《产品性能故障表》所列性能故障。
电子警察控制器说明书
每个电子警察控制器可以抓拍 1 个方向中的 3 个车道，需要有一个检测器来检测线圈， 那么一个路口有几个方向就需要有几个电子警察控制器和几个检测器。
电子警察控制器的参数：
Ø 供电电压：
8V-12V，推荐使用 9V 供电
Ø 供电电流：
<500MA（加相机的供电，12V 条件下）
Ø 反应时间： Ø 抓拍逻辑：
电子警察控制器 说明书
电子警察控制器说明书
杭州阿普科技有限公司
技
科
普 目录
1. 2.
阿 电子警察控制器简介 ......................................................................................................... - 2 -
5.1. 数据通信失败.......................................................................................................... - 7 -
5.2. 没有车时也在拍照，或者车辆没过停车线时就拍照.......................................... - 8 -
Ø 通信协议：
技 1-5 秒（视相机而定）
左转、直行、右转、左转待转、直行待驶、直行+左转、 直行+右转、左转+直行+右转、停用，由工控机设置 422
Ø 可抓拍车道： 3 车道 Ø 每车道线圈数量：2 个
科
实物图：
普
阿
州
杭
-2-
电子警察控制器 说明书
2. 电子警察控制器的抓拍步骤
网络摄像头产品使用说明书
正常情况 光圈太暗
聚焦不正常 变焦
3.4 恢复出厂设置 由于某种原因需要恢复到出厂设置时，可以按以下步骤恢复摄像头的出厂设置。 u 先将摄像头上的电源插头拔下来 u 按下恢复出厂设置按键 u 同时将电源插头插入到摄像头上的电源插口 u 观察状态灯，当状态灯闪亮-〉亮灯时，说明摄像头已经恢复到出厂设置了
33 使用方法............................................................................................................ 8
3.1 摄像头正常工作.................................................................................................................8 3.2 观看图像 ............................................................................................................................8 3.3 调节镜头 ............................................................................................................................8 3.4 恢复出厂设置.....................................................................................................................9 3.5 USB 的使用........................................................................................................................9
IP摄像机说明书
3.4.5 网络设置
系统默认出厂IP为192.168.3.2，您可以对网络摄像机的IP地址、子网掩码和网关等信 息进行重新分配。请注意如果网关地址设置不正确可能导致与网络摄像机连接不成。
11
3.4.6 高级设置：
控制远程设备的时间同步、恢复默认出厂设置、重启等。
3.4.7 本地回放
回放本地录像文件。 为打开文件键，用户可选择需要回放的本地文件进行播放。 为缩放键，用户可根据需要对图像进行缩放。
12
为倍速键，用户可根据需要对文件播放速度进行设置。 为抓拍键，按下该键会将当前显示的视频图像存为位图(bmp)文件，位图文件存 储在用户自己指定的目录下，如下图
3.4.8 工具下载
网络设备搜索工具。搜索网络上的设备，可进行ip地址修改，解决IP地址冲突等网络问题。
13
3.4.9 本地操作
可以控制预览缓存大小，预览缓存越小则延时越短；预览缓存越大则延时越大。
3
2.3 网络摄像机连接
打开网络摄像机包装，取下镜头盖并安装镜头。如果为 C 型接口镜头，请另加 CSVDC 电源适配器连接网络摄像机。 系统的典型应用如下图所示：
2.4 网线的制作
网络摄像机通过标准以太网接口与交换机或PC主机相连，网线制作方式请参考TIA/EIA568A 和TIA/EIA568B标准的线序：
网络监控使用说明书【精选文档】
第一章产品概述IP Camera集成了网络和web服务功能，可以吧摄制的视频通过网络传达到任何地方,您只需通过web浏览器就可随时访问现场视频。
它可以应用在大型卖场、学校、工厂、家庭等一系列场所.第二章产品简介网络摄像机是集传统的模拟摄像机和网络视频服务器以及无线模块于一体的嵌入式数字监控产品.采用嵌入式Linux操作系统和 TI公司最新的 Davinci硬件平台，系统调度效率高，代码固化在 Flash中，体积小，具有较高稳定性和可靠性。
产品特性2.1. 基本功能⏹实时监控功能：可实时了解前端网络摄像机的运行状态；⏹PTZ控制功能：具有 RS485接口,支持云台控制，支持众多解码器协议;⏹报警功能：1路报警输入,1路报警输出，移动侦测、视频丢失、遮挡报警，报警联动输出;⏹用户管理：多级用户权限管理方式。
高级管理员可以创建15个操作员，每个操作员的权限可以设定,系统安全性高；⏹内置 WEB浏览器，支持 IE访问;⏹提供开放的 SDK开发包；2.2. 压缩处理功能⏹支持一路视频信号，25帧每秒(PAL制）、30帧每秒（NTSC制）,采用H.264编码，不仅支持变码率，而且支持变帧率,在设定视频图像质量的同时，也可限定视频图像的压缩码流;⏹支持D1（PAL：704＊576，NTSC：704*480）, CIF(PAL:352＊288，NTSC：352＊240）；2.3. 远程访问、传输功能⏹标配一个 10M/100M自适应以太网口；⏹支持 TCP/IP,HTTP，DHCP，DNS,RTP/RTCP，PPPoE等协议；⏹可通过IE浏览器设置参数、实时浏览视频、查看网络摄像机状态,可以通过网络实现报警联动，可以通过网络存储压缩码流;⏹可通过网络远程升级，实现远程维护；⏹配置SD卡槽，提供远程存储功能；第三章产品外观与接口3.1. 产品外观3.2. 产品接口图3—2 面板接口（注释：仅供参考）1、audio out 语音输出接口2、audio in 语音输入接口3、antenna wifi天线接口4、SD卡插槽5、电源指示灯6、系统重启按键7、DC12V 直流12伏电源8、A、B代表RS—485a、b接口，G代表接地口，I1、I2代表报警输入接口,O1、O2代表报警输出接口，P代表报警电源9、LAN 网络接口10、audio in与内置麦克的切换开关3.3. 网络拓扑图图3-3 网络拓扑图第四章网络连接与访问4.1. 网络连接图4-1 网络连接图4.2. 连接说明访问IP Camera前，首先需要把它练到网上，并加电，检查网口状态灯是否正常,保证通信链路畅通，针对图中的连接方式：1、IP Camera—1 IP Camera—2分别连接到两个局域网上。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
1设备接口示意图 (4)2配置摄像机 (5)2.1连接示意图 (5)2.2获得PC客户端软件 (5)2.3USB配置 (5)2.4网线配置 (8)3如何在互联网上访问摄像机 (9)4观看监控画面 (10)4.1打开监控画面 (10)4.2关闭监控画面 (11)4.3调整监控画面大小 (11)4.4云台转动 (12)4.5亮度、对比度、音量的调节 (13)4.6图像翻转 (13)4.7扩展屏幕可视区域 (14)5TF卡录像 (15)6PC录像及一键拍照 (15)7声音监听和双向语音 (17)8回放录像文件 (18)8.1网络回放TF卡上的录像文件 (18)8.2回放电脑硬盘上录像的文件 (19)8.3通过读卡器回放TF卡上的录像文件 (20)8.4回放独立的录像文件 (20)8.5回放控制：快进、定位、图像翻转 (21)9监控软件登录管理 (22)10系统设置 (22)10.1查看监控软件的软件版本号 (22)10.2设置默认的电脑录像及一键拍照存储目录 (22)11摄像机的高级功能配置 (22)11.1查看摄像机的固件版本 (23)11.2查看TF卡容量 (23)11.3升级摄像机的固件 (23)11.4设置摄像机时间 (24)11.5重新设置摄像机的访问密码 (25)11.6恢复摄像机的默认配置 (26)11.7设置视频参数 (26)11.8设置移动侦测 (27)11.9设置UPNP功能 (28)11.10设置摄像机工作在端口映射模式 (30)11.11复杂网络环境的设置 (30)11.12设置DHCP功能 (30)11.13确保互联网穿网成功 (31)12疑难解答 (31)12.1摄像机无法连接，提示“连接失败” (31)12.2为什么监控画面会卡 (31)12.3USB无法被识别 (32)12.4为什么新的TF卡马上就录满了 (32)12.5为什么会有0字节的录像文件 (32)12.6摄像机启动时，为什么绿灯会灭十秒钟左右？ (32)12.7可以用通用的播放软件来回放录像文件吗？ (33)12.8为什么有的录像文件，无法拖动，只能正常播放或者快进？ (33)12.9摄像机的清晰度怎么样？ (33)13安卓平台软件安装使用 (33)13.1下载并解压安卓软件 (33)13.2打开并登录监控软件 (33)13.3添加设备 (34)13.4观看监控画面 (34)13.5回放 (35)14苹果iOS平台软件安装使用 (35)14.1安装软件 (35)14.2打开并登录监控软件 (35)14.3添加设备 (36)14.4观看监控画面 (36)14.5监控画面控制 (37)1设备接口示意图2配置摄像机2.1 连接示意图2.2 获得PC客户端软件●方法一：通过官网下载1）访问爱浦多官方网站：，下载PC端监控软件，并获得最新的产品信息2）或者直接点击以下链接，下载最新的PC软件：/download/pc.rar●方法二：向爱浦多淘宝客服索取●方法三：从摄像机内部自带的可移动磁盘中获取。
详见USB配置中的相关介绍2.3 USB配置如果您所处的环境，没有路由器等设备，那么，您可以用USB来配置摄像机。
●把包装盒中的WIFI天线安装到摄像机后端●USB数据线连接摄像机USB接口，USB数据线另外一端连接电脑的USB插口●把包装盒里面的DC电源插入摄像机，然后通电。
确认摄像机镜头下面的绿色指示灯，在插入电源以后，会亮3秒，然后熄灭10秒左右，然后会一直保持在常亮状态●等待一会，电脑将会自动弹出两个可移动磁盘◆注：如果连接了USB却无法弹出可移动磁盘，用户可以改用网线配置，详见网线配置◆注：IPED磁盘：内置视频监控软件，爱浦多官网软件下载地址，包括苹果手机软件，安卓手机软件，电脑安装软件的下载链接。
直接点击链接，可以直接打开官网下载网页。
◆注：可移动磁盘：如果摄像机上插有TF卡，则该磁盘就是TF卡的磁盘内容。
可以利用此功能，将摄像机作为一个TF卡的读卡器来使用●双击IPED磁盘里面“爱浦多网络摄像机监控安装软件.exe”，按步骤完成软件安装●打开PC监控软件，并登录●如果电脑和USB的连接是正常的，那么PC监控软件会自动识别摄像机，并弹出配置窗口●监控软件会将当前电脑时间，自动同步到摄像机中●如果是第一次使用，请设置密码●选择准备采用何种方式来连接摄像机：是用有线的方式，还是采用无线的方式●如果是无线的方式，那么请输入无线路由器的SSID和访问密码。
请一定要确保您已经正确地理解了无线接入点SSID和密码的意义。
否则您将无法正确地连接无线网络。
●您也可以点击搜索，来搜索您周边的有效无线接入点名。
●设置IP地址。
如果路由器有DHCP功能，那么建议采用DHCP方式来获取IP地址。
●请打开您的路由器上的UPNP功能，以确保获得最佳的互联网视频访问性能。
关于UPNP的配置方式，请参见摄像机的高级功能配置的设置UPNP功能●您可以在本说明书的摄像机的高级功能配置说明中，获得更多配置信息。
对于普通用户，您不需要对高级配置作改动，即可正常地使用网络摄像机。
●保存配置文件●如果摄像机被正确地设置了密码，那么摄像机的状态会显示：设备已激活，否则会显示：设备未激活●拔除USB线以后，设备会自动重启。
●如果是第一次通过USB来进行配置，那么，请重启一下您的电脑。
●如果网络配置是正确的话，您的摄像机已经可以正常使用了。
●如果摄像机依然无法正常使用，请仔细检查您的配置过程是否有遗漏，或参见疑难解答中的相关内容，或咨询本公司的售后技术服务。
您可在工作时间，致电：0571-********2.4 网线配置如果您的电脑USB口存在兼容性问题，无法通过USB端口来正确识别摄像机的话，您也可以采用网线来配置摄像机●确保USB线已经从摄像机上拔下来了●将网线的一端插入摄像机中，另一端，插入路由器的1,2,3,4端口。
确保电脑也用网线连接到了同一个路由器上●确保路由器的DHCP功能是打开的●打开摄像机的PC监控软件，登录管理界面，点击“设备管理”●点击“自动搜索”，PC监控软件自动搜索摄像机。
如果路由器和网线连接正确，应该能够搜索到设备并自动添加到设备列表中●或者，您可以点击“添加设备”，然后输入摄像机侧面的8位ID号。
如果摄像机、电脑以及网络的连接是正确的话，也可以自动搜索到设备。
●在“设备管理”选项中，双击设备名，或者点击“编辑”，可以打开该设备的配置界面。
●后续的配置步骤，和USB配置完全相同，请参考USB配置中的详细描述。
3如何在互联网上访问摄像机●在远程监控电脑上，安装PC监控软件。
获取软件的方法，和安装摄像机时是完全一样的，请参考获得PC客户端软件●登录软件界面后，点击“设备管理”菜单，然后再点击“添加设备”。
输入您的摄像机侧面的设备ID号，并点击确认按键●如果您的摄像机和监控电脑的网络连接是正确的话，您就已经能连接上摄像机，并对摄像机进行配置。
整个配置过程，和配置摄像机的整个过程是完全一样的。
●点击预览，并双击设备名，您就能够看到设备的实时影像了，详见观看监控画面中的相关描述。
4观看监控画面登录PC监控软件后，默认就是预览画面。
或者，您可以点击“预览”菜单，进入预览画面。
点击您想用来播放监控画面的区块4.1 打开监控画面双击左面的设备列表中的设备名，监控画面就会出现在您选择的窗口中。
4.2 关闭监控画面再次双击左面的设备列表中的设备名，即可关闭监控画面4.3 调整监控画面大小选择最下面的画面布局按键，可以实现单屏，四分屏，九分屏等多画面功能。
●在当前播放画面上，点击鼠标右键，可以实现全屏、多屏以及画面缩放等功能。
◆注：画面放大功能，会造成图像画质下降。
因此建议采用画面的原始尺寸观看。
4.4 云台转动点击右侧的云台图标，可以实现上下左右的转动4.5 亮度、对比度、音量的调节拖动预览界面右侧的进度条，可以调节相对应的亮度、对比度和监听的音量4.6 图像翻转如果摄像机是倒着装的，那么可以把“图像翻转”选项给勾上4.7 扩展屏幕可视区域可以点击伸缩键，以隐藏右侧菜单，获得更大的屏幕可视区域5TF卡录像●请确保在摄像机断电的情况下，插上或者拔下TF卡，以避免带电插拔，对卡造成永久性的损害●给摄像机通电后，摄像机就自动往TF卡里进行录像。
这个录像过程是不受任何人、任何事件的控制，也不受PC监控软件的控制。
整个录像过程不会停止，除非您将摄像机的电源断电。
●当TF卡上内容已经录满了以后，会自动将最老的录像文件内容覆盖。
6PC录像及一键拍照●在观看实时监控画面时，点击下方的录像键，或者右侧的“PC录像”键，红色指示灯会亮起，此时，会把实时监控画面及声音，同步地录像到电脑的硬盘上。
在观看实时监控画面时，点击下方的拍照键，或者右键的“一键拍照”键，会把当前所有的监控画面的实时影像，存成JPEG图片，保存到指定的目录下。
●PC录像和一键拍照，会把所有的监控画面，全部存储起来。
例如用户打开了四个监控画面，那么就会生成四个独立的录像文件。
●您可以在监控软件的“系统设置”菜单中，修改默认的PC录像的存储路径。
详见设置默认的电脑录像及一键拍照存储目录●当硬盘指定容量小于1G以后，会自动删除最旧的录像文件，生成新的录像文件，以此往复循环。
●可以点击最下端，或者右侧的“打开文件夹”键，直接打开存储文件夹7声音监听和双向语音●用户在观看监控画面时，默认是处于声音监听模式。
此时，仅能听到监控画面端传过来的声音。
●如果想和监控端进行双向对讲，可以按下右侧的“双向对讲”键。
此时，就能在摄像机和PC机之间进行双向语音对讲。
摄像机内置了喇叭，拖动右侧的音量进度条，可以控制喇叭的播放音量。
●如果需要更大的声音，用户需要单独购买外置音响，插入摄像机的音频输出口即可。
◆注：当有二个人在同时观看监控画面时，是无法进行双向对讲的◆注：当有在进行双向对讲时，无法建立新的监控画面◆注：如果网络状态不好，双向对讲可能会被自动中断，需要重新点击“双向对讲”键以启动新的对讲。
8回放录像文件8.1 网络回放TF卡上的录像文件当摄像机处于监控状态时，您不用取下摄像机里的TF卡，而是通过网络，就可回放TF 卡里的录像内容●确保已经关闭实时监控画面●点击监控软件中的“回放”菜单●双击左侧设备列表中，想要回放的设备名。
●设备名和其ID号，会显示在右侧的对应选项框中●选择您想观看回放的开始和结束时间●点击确认●录像文件会按时间顺序排列在列表中●双击文件名，即可观看录像文件8.2 回放电脑硬盘上录像的文件通过电脑录制的文件，存在在电脑的硬盘上。
回放过程，和通过网络回放是一样的。
您只要在右侧选中“本地回放”选项，然后再点确认，此时，会弹出对话窗，让您选择“是否回放TF卡文件”。