无线温湿度记录仪说明书
温湿度计操作说明书
温湿度计操作说明书操作说明书一、产品概述：温湿度计是一种用于测量室内温度和湿度的便携式仪器。
它配备了高精度的温湿度传感器，并具有简洁易用的操作界面，适用于各种室内环境，如家庭、办公室、实验室等。
二、产品外观及配件：1. 温湿度计主机：外观小巧玲珑，携带方便。
2. 用户手册：提供详细的操作指南和维护说明。
三、功能描述：1. 温度测量：温湿度计能够准确测量室内温度，温度显示范围为-10℃至50℃。
2. 湿度测量：温湿度计能够准确测量室内湿度，湿度显示范围为20%RH至95%RH。
3. 温度和湿度历史记录：温湿度计能够记录最近的温度和湿度数据，并提供历史记录查询功能，方便用户了解室内环境的变化趋势。
4. 温度和湿度报警功能：温湿度计能够设定温度和湿度的上下限，并在超出设定范围时发出报警提示，提醒用户调整室内环境。
5. 温湿度单位切换：温湿度计支持摄氏度和华氏度、相对湿度和绝对湿度单位的切换。
6. 温湿度数据保存和导出：用户可以将温湿度计记录的数据通过USB接口导出到计算机进行保存和分析。
四、操作步骤：1. 开机：将温湿度计主机的电源开关拨至“ON”位置，仪器自动开启并显示当前的温度和湿度数据。
2. 温度和湿度测量：- 温度测量：温湿度计主机默认以摄氏度单位进行温度测量。
在屏幕上方的温度显示区域可以即时获取当前的温度数值。
- 湿度测量：温湿度计主机默认以相对湿度单位进行湿度测量。
在屏幕下方的湿度显示区域可以即时获取当前的湿度数值。
3. 历史记录查询：- 按下“历史记录”按钮，进入历史记录查询界面。
- 使用方向键选择日期，通过“确定”按钮确认选择。
- 温湿度计将显示所选日期内的历史温度和湿度数据。
4. 温湿度报警设置：- 按下“设置”按钮，进入设置界面。
- 使用方向键选择“温度报警”或“湿度报警”选项，通过“确定”按钮确认选择。
- 设置温度或湿度的上下限数值，并通过“确定”按钮保存设置。
- 当温度或湿度超过设定范围时，温湿度计将发出报警提示。
温湿度记录仪操作使用说明手册
温湿度记录仪操作使用说明手册北京堃堃科技有限公司KSP_RTHN(4I)(4O)型温湿度记录仪操作使用说明手册1.产品简介KSP-RTHN(4I)(4O)型温湿度记录仪是我司基于新版《药品经营质量管理规范》（简称新版GSP规范），并结合研发温湿度监测系统多年来的行业经验，独立自主研发的一款完全适合新版GSP认证的温湿度记录仪。
2产品特征1性能优越，处理速度快。
基于ARM的STM32低功耗芯片，处理能力超强，远超传统单片机芯片。
1.精度高。
采用瑞士原装进口数字温湿度芯片，温湿度精度远高于国产芯片。
2.稳定性高。
从设计到生产层层严格把关。
3.美观大方，操作人性化。
3.应用场合KSP-RTHN(4I)(4O)型温湿度记录仪不仅可以完美应用于GSP认证，还可广泛用于疾控中心、家居、办公场所、酒店、餐厅、农业研究、食品、医药、化工、气象、环保、电子、实验室等领域。
4.综合参数1.尺寸与重量2.结构3.功能特性4.硬件及信号特性5.产品展示第一章显示整个屏幕划分为上部和下部，由一根黑色实线隔开，上部又划分为左部和右部。
屏幕上的各个细节的显示含义分别如下：一、上部：1.左部：从上向下每行依次为：1)用户标识编号(ID)。
用来指定不同的设备，因此在同一网络不允许出现两个相同标号的设备。
2)上级服务器类型。
此行共两个图标，同一时刻只能有一个图标被点亮。
左边图标被亮时，表示上级直连一级服务器（电脑），右边图标亮时表示直连的是二级服务器。
3)报警显示。
若此警铃图标被点亮说明有报警产生。
4)无线网络连接状态。
若选配GPRS设备连接则此图标会显示相应的网络强度。
2.右部：从上到下每行依次为：1)温度信息：此行的数值表示温度值，注意前面的H和L字母，在数值后面有温度单位，可以通过设置使设备在华氏和摄氏之间转换显示。
正常态：①显示实时温度值，并且字母H和L不会显示。
报警态：纯报警态（设备报警时用户操作使设备进入设定态，称为非纯报警态，此时警铃、报警音、报警灯仍然有效）时H和L不会同时被点亮。
RCW-800W 温湿度记录仪使用说明书
RCW-800WIoT Data Logger ManualElitech iCold Platform: RCW-800W series is an IoT recorder that communicates through WIFI network, which is used for real-time monitoring, recording, alarming and data uploading of ambient tempera-ture/humidity. The recorder is mainly composed of a temperature/humidity sensor and a host instrument. It directly transmits the measured value to the Elitech cold cloud through the Wi-Fi network. It can be stored in the Elitech cold anytime, anywhere through mobile phones and PCs with Internet access functions. View and analyze the data in the cloud platform. After the limit is exceeded, the alarm can be sent in time through SMS, email, voice and other methods.*When the temperature and humidity are higher than the upper limit, the screen value will display red; when the temperature and humidity are lower than the lower limit, the screen value will display blue.● Small size, stylish shape, magnetic tray design, easy to install ● Large-size TFT color screen display● Built-in rechargeable lithium battery, can still provide real-time data upload for a longtime after power failure● The product is suitable for warehouses, cold storage, refrigerated trucks, cool cabinets, medicine cabinets, freezer laboratories and other scenarios①② Time ③ Date④ Probe 1⑤ Currenttemperature ⑥ Devicestatus⑦ Buzzer status ⑧ WIFI module status⑨ Battery power status⑩ Charging statu⑪ Probe 2⑫ Currenthumidity⑬ Number ofo ine data① Power LED Light ② Alarm LED Light③ LCD Display screen④ Home key ⑤ Right key⑥ Monitoring start/stop ⑦ Buzzer on/o⑦ Micro usb port③ Back cover screws⑤ Sensor port ⑥ Power switch④ Reset button(short press to enter thedistribution network, long press to restart t he device)⑩ Celsius/Fahrenheit conversion⑨ ② Batterycover① Bracket6. Instructions1. Power input: 5V/1A2. Temperature display resolution: 0.1℃3. Humidity display resolution: 0.1%RH4. O ine record :20,000 points5. Data storage method: circulating memory6. Record,Upload interval &Alarm interval① Normal Recording interval: 1min~24H can be set② Alarm logging interval:1min~24H can be set(The alarm recording interval must be less than or equal to the normal recording interval)③ Normal Upload interval: 1min~24H can be set,default5mins④ Alarm upload interval: 1min~24H can be set,default2mins(The alarm upload interval must be less than or equal to the normal upload interval)7.Battery life: no less than 7 days (@25℃, upload interval 5 minutes)8.Indicator light: Alarm indicator light, charging indicator light 9.Screen: TFT color screenmunication method: WIFI11.Alarm method:Local alarm, cloud alarm (SMS, APP , email)12.Buttons: switch machine, reset button (WIFI/Bluetooth), left key, home key, right key, Celsius/Fahrenheit conversion, monitoring start/stop, buzzer on/o ,13.Protection grade: IP5014.Standard sizes:110mm*78mm*27mm● ChargeConnect to the power adapter via a USB cable;When charging, the charging indicator light will be always on.The status bar will display the5. Technical Specifications● Interface●ButtonBuzzer on/off key: long press for 3 seconds, the buzzer function is turned on/closure open icon / close iconShort press in an alarm state will turn off the current buzzer alarmHome button: Short press to switch to the home page Left key: short press the interface to page forward Right key: short press the interface to page backwardsCelsius/Fahrenheit conversion key: press and hold for 3 seconds, the temperature unit will switch between Celsius/Fahrenheit.Monitoring start/stop button: long press for 3 seconds, start/stop monitoring, data start/stop record storage, displayThe lower left corner will display the status synchronously: monitoring/not monitoring① Probe 1temperature alarm limit ② Probe 2temperature alarm limit③ Temperature upper limit alarm value Dual temperature configuration parameter interfaceTemperature and humidity configuration parameter interface④ Temperature lower limit alarm value⑤ Temperature upper limit alarm value ⑥ Temperature lower limit alarm value① Probe 1temperature alarm limit ② Probe 1 humidity alarm limit③ Temperature upperlimit alarm value ④ Temperature lowerlimit alarm value ⑤ Humidity upper limit alarm value ⑥ Humidity lowerlimit alarm value2. Account registration and loginOpen the APP , in the login interface (as shown in Figure 1), enter the verification information according to the prompts, and click "Login" to complete the account login. If you have not yet registered an account, please click "Register Now" " in the login interface. In this interface (as shown in Figure 2), enter the verification information according to the prompts to complete the account registration.① Time interval between two data recordings ② Data logging interval when alarming ③ Data upload interval④ Time interval for uploading data to cloud platform when alarming⑤ Current record time of the collector ⑥ The total number of data recorded by the collector this timeIP addressWIFI MAC address ID number 20 digits Software versionWIFI configured: configured/unconfigured⑦ Automatic sleep time after no operation1．Download and install APPPlease scan the QR code below to download the "Elitech iCold"Configuration parameter interfacesystem information interface3．WiFi distribution network1)Connect the phone to the WiFi network and open the APP;2)Short press the reset button on the back of the machine to enter the WiFi network configuration mode, please see the LCD status bar icon for the specific status;Figure 1: Account login interface Figure 2: Account registration interface3) Follow the steps below to configure WiFi, the top of the screen displays " ", and the device has successfully configured WiFi;Open the APP,click the “ ” icon;Click the " " icon, scan the QR code on the back of the device or manually enter the device GUID;Edit the device name, select the time zone, and click "Add"to add the device successfully.4. Bluetooth distribution network1) Connect the phone to the WiFi network, open the APP and Bluetooth;2) Short press the reset button on the back of the machine to switch to the Bluetooth network configuration mode. Please see the LCD status bar icon for the specific status;Figure 3: Device InformationClick "Confirm" to start configuring WiFi;4) If the device WiFi configuration is unsuccessful, repeat the above steps 1) to 3).5) When the device needs to reconfigure WiFi, follow steps 1) to 2). Then open the "Device Information"⑤～⑥Enter the WiFi password in the APP;Click "Confirm", the WiFiconfiguration is successful.For more functions, please log in to the Elitech iCloud platform: , do more.After the device is added for the first time, you can get free SMS, data and premium service trial, please recharge the device after the trial service expires. For more recharge details, please refer to the "Elitech Cold Cloud Value-added Service Recharge Guide" in the APP to operate.3) Refer to the WiFi network for the network steps, and the Bluetooth network can support static IP address settings.④ Enter the WiFi password in the APP①Turn on the Bluetooth network②Obtain IP address automatically③Turn o automatic IP address acquisition: fill in the IP address manually Please refer to the current networking message requirements:IP address, subnet grab code, gateway address, DSN server address9.。
DM588网络型温湿度记录仪产品说明书
DM588网络型温湿度记录仪产品说明书功能简介●高精度、高稳定温湿度传感器●超大显示屏、带背光●体积小、重量轻、功耗低、反应速度快●具有记录功能、最大记录点数：12800●USB通信、485通信●9～36V(DC/AC)/USB 5V供电可选●内置报警功能、带报警输出●内置锂电池（可充电）一、产品概述DM588网络型温湿度记录仪是一款高性能工业级温湿度变送器，超大显示屏能实时显示温湿度数据，且带有背光功能，内置锂电池和报警器，具有报警控制输出功能，功能强大，适用范围极广。
该温湿度变送器具有体积小，重量轻、量程宽、精度高、且响应速度快和长期稳定性好等特点，使它广泛应用于楼宇自动化、气候与暖通信号采集、博物馆与宾馆的气候站、仓储物流以及医疗行业、机房温度监控等各种重要对空气中的温湿度进行测量和控制的领域。
二、产品参数1、供电电压：9~36VDC或USB 5V或内置锂电池2、显示分辨率：0.1℃或0.1%RH3、工作温度：-20~+60℃；精度：±0.3℃4、工作湿度：1~99.9%RH；精度：±2%RH5、采样周期：外电：2s 内置电池：5s6、记录点数：12800（最大）7、功耗：外电：<20mA 锂电池：<2mA8、灵敏度衰减值：温度<0.1℃；湿度<0.1%RH9、电池工作时间：充满电可以持续工作半年以上（不开报警及背光）10、输出信号：RS485信号11、通信协议：标准MODBUS RTU协议*配我公司温湿度监测软件V2.9三、产品尺寸(单位:mm )四、产品安装及接线说明◎该产品采用的安装方式1、将4芯（或带屏蔽）连接电缆变送器端的四根线分别连接到变送器连接头的1、2、3、4脚(带屏蔽线的屏蔽层连接到电源地)；2、另一端对应接入供电电源和计算机（需485转换器）或其它相应设备；3、将变送器前后外壳扣紧；4、经检查接线无误后方可接通电源，检查变送器输出是否正常；5、现在变送器可以正常工作了；6、如需外接报警器请按485典型应用图来连接。
TH702温湿度记录仪记录仪使用说明书
软件介绍：F-LINK 是一款软件产品，可对本公司生产的便携式记录仪”进行编程、数据下载，能显示、分析和报告来自记录仪的时间温度等数据，其友好的操作界面为用户提供优越的灵活性。
F-LINK 支持的操作系统包括：Windows® 98，Windows® 2000，Windows® XP，Windows® Server 2003，Windows® Vista 32 bit。
最低•Pentium® 系列处理器(CPU) - 1 Ghz•256色VGA•512 Mb RAM•Windows® 98推荐•Pentium® 系列处理器(CPU) - 2 Ghz 或更高•真彩色VGA•1Gb Mb RAM•Windows® XP使用介绍：1、连接设备：对设备的任何操作（如启动、停止或下载等），必须在已与设备建立连接的条件下进行。
同时，通过此项功能，用户可以查看设备即时工作状态。
方法：选择菜单设备/启动在线采集或工具栏在线。
2、启动设备：方法：选择菜单设备/配置或工具栏配置，显示向导对话框。
第一步：配置各通道记录和报警功能。
第二步：配置设备工作参数和用户信息。
1.启动方式分为"立即启动"、"定时启动"和"手工启动"2.立即启动：配置启用后，设备立即进入工作状态.定时启动：配置启用后，设备处于等待状态，直到走时至指定时间即进入工作状态。
手工启动：配置启用后，设备处于等待状态，直到按下设备面板上的启动按钮即进入工作状态。
3.记录间隔：指定设备保存记录的间隔时间。
4.停止方式：分为"记满停止"、"循环记录"、"定时停止"和"指定次数"记满停止: 当存储空间耗尽时，设备停止工作。
循环记录: 当存储空间耗尽时，以新记录覆盖旧记录，设备始终处于工作状态。
S500WIFI温湿度数据记录仪使用说明书
S500WIFI User Manual of Temperature and Humidity Data LoggerCONTENTSCHAPTER 1. INTRODUCTION (1)1.1F EATURES (1)1.2A PPLICATION (1)1.3S PECIFICATIONS (1)1.4S TRUCTURE I NSTRUCTION (2)1.5LCD D ISPLAY I NSTRUCTIONS (2)1.6I NSTRUCTION OF B UTTONS (4)CHAPTER 2. SOFTWARE (5)2.1WIFI S ETUP (5)2.2I NSTRUCTION OF T O M ONITOR SOFTWARE (9)2.3D ATA A NALYSIS (11)CHAPTER 3. FAQ (14)3.1LCD S CREEN D IM (14)3.2S OFTWARE "R UNTIME E RROR" (14)3.3C HECK COM P ORT N UMBER (14)Chapter 1. Introduction1.1 Features⏹Elegant appearance, easy to operate and reliable. Desktop and wall-mounted⏹Transferring real-time temperature and humidity data to computer throughWIFI⏹High accuracy: 0.2~0.5℃/2~5%RH⏹Large Capacity: 65000 data groups⏹Can be locked to display maximum and minimum value⏹Internal audible and visual alarm and send alarm message to mobile phoneonce temperature or humidity is over limit.⏹Multiple levels of data protection; all the collected data will not be lost.1.2Application⏹Widely used in environment with WIFI access to monitor temperatureand humidity.1.3Specifications1.4Structure Instruction1. LCD display2. ON/OFF3. Backlight4. MAX/MIN checking button5. LOG6. Hanger (used for fixing on the wall)7. Battery cover (screw to replace the battery)8. Holder (used for desktop)9.WIFI reset button1.5 LCD Display InstructionsBacklightAlarming for over limit of temperature or humidity TemperatureHumidityBattery indicationButtons locked/unlockedExternal AC 12V power connectedConnected to computer by USB cableLogger is in the logging modeNumber of data groups collectedMaximum value is displayedMinimum value is displayedTime1.6 Instruction of ButtonsChapter 2. Software2.1 WIFI SetupCopy the WIFIConfig software from the accompanied CD in the package to a computer, then to the designated cell phone(Android Cell Phone only). Install the software which will create icon.Reset the logger for 3-5 seconds(reset hole is at the upper corner in the back of logger),then search for network module of thisdevice(defaulted as RAK415-AP-606AB0) in WIFI settings of the cell phone and choose it.Open WIFICONFIG software in the cell phone, slide down the screen to refresh interface of the app, then click on RAK415WIFI to enter setting mode.2.1.1 Click on 【OK】button to confirm 【Certificate】.2.1.2 Click on【Mode】in the function list, then choose 【STA】 and 【Save】to save settings.Click on Save2.1.3 Click on【STA】 and choose the WIFI name and input password, then 【Save】to save the settings.Name of the WIFIconnectionWIFI Password2.1.4 Socket SettingsChoose TCP-ClientObject IPObject Port【Object IP】is the IP address of the computer where the data is stored,for example: 192.168.1.25;As of【Object Port】,please enter “4588”.2.1.5 Click on【Settings】,then 【RESET】to save settings and restart WIFI module of the logger.Click on RESET2.2 Instruction of ToMonitor software(1)Copy the software folder to the computer, then open the softwareDouble clickTomonitor(2) User Name: admin；Password: adminTo Login（3）Add New Logger in Tomonitor1.Run Tomonitor software & Login2.Press "Loggers”3.Choose a logger in the logger list and display its properties onthe right side4.Input the new logger's Serial Number & Name.Tips: Name cannot include symbol. SerialNumber is on the label of the logger5.Sampling (Seconds): When S500-GPRS upload real-time data,ToMonitor will sync this value to the data logger’s “LoggingInterval” (Logging/Upload frequency) property.6.Logger type choose 【Wireless】7.Press 【Add】 and 【Exit】to enter the monitoring interface8.In short time, real-time data collected by the logger will bedisplayed263 4572.3 Data Analysis（Notice：ToMonitor needs to be opened before we can use ToClient8 software which is used for data analysis）(1)Open Toclient8 software in the software folderClick ToClient8(2) Click on 【Connect】to login.【Password】is “admin”.(3)Data Query:(4)It will come out the following graph(5)Click on 【Data List 】to get historic dataChoose the loggerStart QueryTime SettingData ListChapter 3. FAQ3.1 LCD Screen DimReason:●Insufficient battery or the environment temperature is too low or toohigh.Solution:●In the case of insufficient battery, please replace the battery. Ifresulted from environment temperature, please immediately take the logger out of the environment.3.2 Software "Runtime Error"Reason:●OS forbid software creating files.Solution:●Run the program (software) as an administrator.●Install software in Disk D:\● A data logger name cannot contain any of the following characters:\ / : * ? " < > |●Software’s installation path cannot include Chinese character orgarbage character.3.3 Check COM Port Number●Press “Win” + “R” in keyboard -> Run "devmgmt.msc" to Open "DeviceManager" in Windows-> Expand "Ports (COM & LPT)" -> "USB-SERIAL CH340 (COM No.)" is the Data Logger。
无线温湿度监测仪说明书
Wireless Thermo-Hygro MonitorModel: WH0280Content1. Introduce (2)2. Get Started (2)2.1 Package Contents (2)2.2Recommend Tools (2)2.3 Thermometer Sensor Set Up (2)2.4 Display Console Set Up (4)3. Wireless Sensor Installation (6)3.1 Mounting with Zip Tie (7)4. Console Operation (7)4.1 Key function (7)4.2.Normal model (8)4.3 Time alarm model (9)4.4Min value model (9)4.5Max value model (10)4.6 Setting model (11)4.7. Setting model for alarm clock ................... 错误！未定义书签。
5.Sensor Resynchronization (10)6.Best Practices for Wireless Communication (10)7.Specifications (12)7.1.Wireless Specifications (12)7.2Measurement Specifications (12)7.3Power Consumption (12)8. Troubleshooting Guide (13)1. IntroduceThank you for your purchasing of this Wireless Indoor/Outdoor Thermometer with indoor humidity. To ensure the best product performance, please read this manual and retain it for future reference.2. Get StartedNote: The power up sequence must be performed in the order shown in this section: insert batteries in the remote sensor first, display console second.The weather station consists of a display console (receiver), and up to 3 thermometers (remote sensors), based on your order configuration.2.1 Package Contents2.2 Recommend ToolsHammer for hanging remote thermometer transmitter.2.3 Thermometer Sensor Set UpNote: Do not use rechargeable batteries. They tend to have a lower operating voltage, do not have a wide temperature range, and do not last as long as non-rechargeable batteries.We recommend fresh alkaline batteries for outdoor temperature ranges between -20°C and 60°C and fresh lithium batteries for outdoor temperature ranges between -40 °C and 60 °C.1.Remove the battery door on the back of the sensor by sliding thecompartment door down, as shown in Figure 1.2.Set RF sensor channel.Figure 13.Insert one AA battery in the back of the sensor4.After inserting the battery, the remote sensor LED indicator will lightfor 4 seconds, and then flash once per 60 seconds thereafter. Each time it flashes, the sensor is transmitting data.5.Close the battery door.2.4 Display Console Set Up1. Move the remote thermometer(s) about 2 to 3m away from thedisplay console (if the sensor is too close, it may not be received by the display console).2. Remove the battery door on the back of the display. Insert one AA(alkaline or lithium, avoid rechargeable) battery in the back of the display console.All of the LCD segments will light up for a few seconds to verify all segments are operating properly.Figure 23. Replace the battery door, and fold out the desk stand and placethe console in the upright position.The console will instantly display indoor temperature and humidity.The remote temperature will update on the display within a few minutes.While in the search mode, the reception search icon flash.Note: If the remote does not update, please reference the troubleshooting guide in Section.2.4.1 Display Console Layout2.4.2 Sensor Operation VerificationVerify the indoor and outdoor temperature match closely with the console and sensor array in the same location (about 2 to 3m apart). The sensors should be within 2°C (the accuracy is ±1°C. Allow about 30 minutes for both sensors to stabilize.3. Wireless Sensor InstallationIt is recommended you mount the remote sensor in a shaded area. Direct sunlight and radiant heat sources will result in inaccurate temperature readings. Although the sensor is water resistant, it is best to mount in a well-protected area, such as under an eve.3.1 Mounting with Zip TieMounting the sensor with a zip tie will result in better accuracy when mounting outside, since it is not touching other objects.Figure 43.2 Mounting with Nail or screwTo mount the sensor with a nail or screw, the cap must be less than or equal to 5mm in diameter.Figure 54. Console OperationThe console has two buttons at the back of console for easy operation. If no operation for 30s, display will return back to normal mode.There are five program modes available: Setting mode, Time Alarm Mode, MIN/MAX Mode, Loop display Mode and Sensor Register Mode4.1 Setting ModeWhile in normal display, press the MODE key for 2 seconds to enter Setting ModePress the MODE key to select the following settings in sequence:1. 12/24 Hour format2. Time setting (hour/minutes)3. Temperature unit (°C / °F)4. Complete setting mode and back to normal displayIn the Set Mode, press CH/+ key to change or scrolls the value. Hold the CH/+ key or or MODE key for 3 seconds will increase/decrease digits in great steps.4.2 Time Alarm ModeWhile in normal display, short press the MODE key one time to enter Time Alarm ModeWhile in time alarm mode, press and hold the MODE key for 2 seconds, the alarm hour will begin flashing.Change Alarm Hour. Press CH/+ key to adjust the alarm hour up. Change Alarm Minute. Press the MODE key again to set the alarm minute. Press CH/+ key to adjust the alarm minute. Press MODE key again to confirm the setting.Cancelling the alarm. When the alarm has been triggered, the alarm will sound and the alarm icon will flash for 120 seconds. Press anybutton to silence the alarm.4.3 MIN/MAX modeWhile in normal display, press the MODE key two times to enter the Minimum mode, and the MIN icon and minimum records will be displayed.a. Select Channel display. If you have multiple temperature sensors,press CH/+ to shift display Min value of Channel 1, 2 or 3. If there is no extra outdoor sensor available, it will display --.—b. Reset the Min value. Press and hold the CH/+ key to reset theminimum value of indoor temperature, humidity and the current display Min outdoor temperature to the current readingWhile in normal display, press the MODE key three times to enter the Maximum mode, and the MAX icon and maximum records will be displayed.a. Select Channel display. If you have multiple temperature sensors,press CH/+ to shift display Max value of Channel 1, 2 or 3. If there is no extra outdoor sensor available, it will display --.—b. Reset the Max value. Press and hold the CH/+ key to reset themaximum value of indoor temperature, humidity and the currentdisplay Min outdoor temperature to the current reading4.4 Loop display ModeWhile in normal display, press the CH/+key to select the outdoor display in the following sequence:CH1-CH2-CH3-means to loop displays the current outdoor temperature value of the RF channel automatically.5.Sensor ResynchronizationIf the remote sensor lost reception or extra sensors to be added, press both the CH/+ and MODE keys at the same time for five seconds.While in the search mode, the reception-search icon flash.6. Best Practices for Wireless CommunicationNote: To insure proper communication, mount the remote sensor on a vertical surface, such as a wall. Do not lay the sensor flat.Wireless communication is susceptible to interference, distance, walls and metal barriers. We recommend the following best practices for trouble free wireless communication.1. Electro-Magnetic Interference (EMI). Keep the consoleseveral feet away from computer monitors and TVs.2. Radio Frequency Interference (RFI). If you have other 433MHz devices and communication is intermittent, try turning offthese other devices for troubleshooting purposes. You mayneed to relocate the transmitters or receivers to avoidintermittent communication.3. Line of Sight Rating. This device is rated at 100meter line ofsight (no interference, barriers or walls) but typically you willget 30 meter maximum under most real-world installations,which include passing through barriers or walls.4. Metal Barriers. Radio frequency will not pass through metalbarriers such as aluminum siding. If you have metal siding,align the remote and console through a window to get a clearline of sight.The following is a table of reception loss vs. the transmission medium. Each “wall” or obstruction decreases the transmission range by the factor shown below.7.Specifications7.1.Wireless Specifications∙transmission range (in open air): 80meter∙Frequency: 433 MHz∙Update Rate:Indoor temperature/humidity 48 secondsOutdoor temperature CH1 48 secondsOutdoor temperature CH1 49secondsOutdoor temperature CH1 50 seconds7.2 Measurement SpecificationsThe following table provides specifications for the measured parameters.7.3Power Consumption∙Base station (display console) : 1 x AA 1.5V Alkaline or Lithium batteries (not included)∙Remote sensor : 1 x AA 1.5V Alkaline or Lithium batteries (not included)8. Troubleshooting GuideSolutionThere are dashes (--.-) on the If sensor communication is lost, dashes (--.-) will be displayed on the screen. To reacquire the signal, To resynchronize, press both the 【CH/+】and【MODE】keys at the same time for five seconds., and the remotesearch icon will flash. Once the signal is reacquired, the remote search icon will turn on, and the current values will be displayed.The maximum line of sight communication range is 80m and 30m under most conditions. Move the sensor assembly closer to the display console.If the sensor assembly is too close (less than 2m), move the sensor assembly away from the display console.Make sure the remote sensor transmitter light is flashing once per around 50 seconds.Install a fresh set of batteries in theCaution!The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user authority to operate the equipment.All rights reserved. This manual may not be reproduced in any form, even in part, or duplicated or processed using electronic, mechanical or chemical process without the written permission of the publisher.This booklet may contain errors or misprints. The information it contains is regularly checked and corrections are included in subsequent editions.We disclaim any responsibility for any technical error or printing error, or their consequences. All trademarks and patents are recognized.Care and Maintenance●Do not mix old and new batteries●Do not mix Alkaline, Standard, Lithium or Rechargeable batteries●Ensure batteries are installed correctly with regard to polarity +/-。
无线温湿度变送记录仪使用说明书
RS-WS-DY-6-*无线温湿度变送记录仪用户手册文档版本：V1.0目录1. 产品简介 (4)2. 产品选型 (4)3. 功能特点 (4)4. 技术参数说明 (5)5. 产品外形尺寸 (6)6. 菜单及显示说明 (6)6.1 面板示意说明 (6)6.2 液晶显示说明 (6)7. 系统菜单与设置 (7)7.1 按键功能说明 (7)7.2 按键操作简介 (8)7.3 功能显示项目说明 (8)8. 设备安装要求 (14)8.1设备安装前检查 (14)8.2整体安装说明 (14)8.3接口说明 (14)8.4 安装说明 (15)9. 设备接入监控平台软件 (15)10. 联系方式.................................................................................................. 错误！未定义书签。
11. 文档历史.................................................................................................. 错误！未定义书签。
1. 产品简介RS-WS-DY-6系列产品是一款大屏液晶显示无线通信并带自身记录的温湿度测点。
产品采用独有的无线扩频技术，通信距离远，视距可达800米，穿透能力强，可穿透3~4堵混凝土墙，独有的跳频技术，通信抗干扰能力强。
温湿度采集精度高于国标，可设置温湿度上下限报警值。
设备采用大屏液晶显示方便用户观察，内置高分贝蜂鸣器，具有就地声光报警的功能，内置两路继电器，可实现温湿度上下限双控，限值可自由设置，温度湿度凭密码校准，自动温湿度记录等功能。
设备采用外部电源供电，用户可通过电源适配器接交流220V给设备供电。
现场无需进行通信布线，搭配RS-JSQ-W无线接收机（1台RS-JSQ-W可管理200台RS-WS-DY-6系列测点）在控制成本的基础上，满足了现场工程的应用，极大的缩短了工程施工周期。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
目录一、系统概述-------------------------------------------- 21、系统网络简介2、仪器说明3、无线记录仪使用领域4、配件清单二、技术特性--------------------------------------------- 51、主要特点2、技术参数三、仪器安装--------------------------------------------- 61、主机安装2、终端接收器安装3、中转器安装4、PC 软件安装四、系统使用与操作-------------------------------------- 101、使用前准备与检查2、按键功能说明3、系统全自动组网4、软件使用说明与操作五、故障分析与处理------------------------------------- 281、无线温湿度记录仪主机故障分析2、终端接收器故障分析六、售后服务-------------------------------------------- 291、日常维护2、返修校准3、售后服务联系1无线系统中文使用说明书一、系统概述1、系统网络简介：199无线系统是一个由无线温湿度记录仪、中转器及终端接收器组成的无线网络系统。
本系统只能存在一个终端接收器，可以有多个中转器，中转网络可达5 层级连，无线温湿度记录仪为低功耗模式（可使用电池供电，也可使用常备电源供电）并可全自动组网。
GPRS 功能可随时随地将指定信息发送到已绑定手机上，以真正实现实时监控功能。
（图1：无线记录仪系统布局图示意图）2无线系统中文使用说明书2、仪器说明1.1 无线温湿度记录仪说明（图2：无线温湿度记录仪主机）产品型号：无线温湿度记录仪199-WTH无线单温度记录仪199-WT111.2 终端接收器与中转器屏幕显示说明（图3：终端接收器显示）上电后屏幕上出现如图所示的3行文字时表示仪器正确启动。
第一行是仪器类型；第二行显示字符“ID:”，当中转器不在网络中时显示“Failed”；第三行是16个字母的ID号。
终端接收器型号：199-TR中转器型号：199-RE3、无线记录仪使用领域Apresys无线温湿度记录仪，严格意义上说来，更是一套无线温湿度监控系统。
利用成熟的2.4G 无线网络现实通讯，实现长距离（点到点视距500-1000 米，网络覆盖可达五平方公里）、多点（≤500 结点）的局域环境温湿度监控，更利用GPRS 通讯技术，实现跨地区、省市甚至跨国际的环境温湿度远程控制。
与传统无线技术相比，有了质的飞跃。
常见应用领域有：大型冷库、冷藏运输车温湿度监控大型药厂、食品厂、化工厂、精密电子厂环境温湿度监控蔬菜大棚、畜牧业养植基地环境温湿度监控博物馆、档案室、气象局、血库、医院、实验室环境温湿度控制4、配件清单标配件：1）无线温湿度记录仪一台2）2.4G天线一条3）工业电池三节4）USB数据线一条5）外接探头一条6）电源适配器一个7）软件光盘一份8）使用说明书一本9）产品质保卡一本选配件:1）终端接收器2）中转器3）GPRS模块及软件4）RFID模块及软件4无线系统中文使用说明书二、技术特性1、主要特点单结点连GPRS 模块或终端接收器统一连GPRS 模块，以实现与手机双向通讯；自动组网，最高5级中转设置，使网络覆盖面积成倍扩大；通过手机或PC端软件统一管理结点网络，使操作更简单，大大提高工作效率。
2、技术参数温度采样间隔5 秒到24 小时任意时间间隔发送数据时间间隔1 分到24 小时任意时间间隔电源外接电源+3.6V、2400mAh锂锰电池（可更换）报警软件上温湿度报警、低电量报警，手机短信温湿度报警电池寿命2-3 年（视采样频率和数据传输方式而定）采集器容量10 万组数据数据传输2.4G 无线传输+GPRS 数据传输+USB 有线传输温、湿度量程-40℃to 100℃/ 1％RH to 100％RH温、湿精度±0.5℃/ ±3％RH液晶显示功能仪器ID、温度、湿度、电量、信号强度、记录状态、时间PC 终端功能同时监控500 个以内的数据采集器可对每个数据采集器单独设置（命名、温湿度上下限设置、启动停止记录、数据读取）可显示温、湿度数据列表和数据趋势图可将数据方便快捷的转换为Excel文档网络管理功能不超过500个结点的局域网ID 号匹配验证功能（提前在PC 端输入采集ID 号才能联网）邻节点传输距离300m 非视距1000m 视距无线电波频率2.4GHz环境温度-40 to 100℃；1%RH to 100%RH尺寸140mm*70mm*20mm重量160 克5无线系统中文使用说明书三、仪器安装1、记录仪安装1.1将天线固定在记录仪主机上；1.2将外置探头固定在主机上；1.3装入电池；1.4 记录仪和接收器尽量置于可视范围内，尽可能避免金属障碍，保持通信顺畅，尽量用9V外接直流电源供电；1.5用钉子固定，挂在所测点；1.6将天线角度调整到信号最强。
2、终端接收器安装1.1将天线固定在接收器上，天线方向与接收器正面垂直；1.2连接电源（USB电源或9V 直流电源）1.3 将USB数据线与电脑连接。
3、中转器安装1.1与记录仪安装相同；1.2必须使用USB电源或9V 直流电源。
4、PC 软件安装4.1双击软件安装图标：34.2 选择软件语言，中文系统选中文，非中文系统选英文：6无线系统中文使用说明书4.3点击下一步4.4软件自动安装中，点击安装7无线系统中文使用说明书4.5软件安装完成,请选择232 转USB驱动。
4.6 出现安装画面，稍等数秒，出现“Press enter”提示后后按Enter.,4.7 出现桌面快捷方式图标8无线系统中文使用说明书4.8双击图标后显示登录界面，请输入初始帐户及密码初始ID: admin初始Password:apresys输完后点击：，即可使用无线系统软件9无线系统中文使用说明书四、系统使用与操作1、使用前准备与检查1.1 天线：查看天线是否完好，是否有松动，调整好天线的方向；1.2 传感器：终端记录仪需要接上传感器才能使用；1.3 电源：终端接收器与中转器都需要使用常备电源供电，有两种接入常备电源的方法，a、直接使用USB取电，b、通过9V DC电源插座接入；1.4 终端记录仪可安装3 节3.6V电池或者接常备电源使用；2、按键功能说明无线温湿度记录仪屏幕点亮30秒后会自动关闭。
右键功能：点亮屏幕。
左键功能：只有当屏幕点亮时左键才有效。
如果仪器已在网络中，按下左键将刷新RF信号状态5秒。
如果仪器不在网络中且仪器位于网络的有效信号内，连续按下左键几次，仪器将自动加入网络。
3、系统全自动组网当仪器位于网络的有效信号内时都会自动加入网络。
终端接收器为低功耗模式时，将会在5分钟内自动加入到网络中。
4、软件使用说明与操作4.1 登录软件后，出现仪器管理主界面：10无线系统中文使用说明书4.1.1 建立终端接收器与软件通讯4.1.2 报警显示4.1.3 最新消息显示4.1.4 仪器管理功能键说明a.添加：添加新的设备，请正确输入仪器屏幕上的ID号；请优先输入终端接收器ID号。
b. 添加完毕后显示：11 无线系统中文使用说明书c.删除：删除勾选的设备；d.刷新：刷新选中的网络设备，以获取仪器最新的连接状态；e.退网：仪器退出网络；f.设置名称：修改选中仪器的名称；12无线系统中文使用说明书4.2即时数据界面4.2.1 即时数据主界面注：第一次使用该软件时，会自动弹出一个窗口，必须先建立数据库。
数据库存在安装目录下，在已建有数据库的情况下，不再弹出此窗口。
数据库将自动把所有记录过的数据按类存储。
一个数据库的容量为2G，如果超过2G，数据满溢，无法存入，则需建立新的数据库。
13无线系统中文使用说明书4.2.2 即时数据功能键说明：a.启动即时数据：设置间隔参数后，勾选所需启动仪器，可完成批量启动即时数据b.停止即时数据：将停止显示选中记录仪的即时数据；14无线系统中文使用说明书c.修改间隔参数：设置即时数据显示时间间隔，默认状态为1分；d.单次数据获取：将获取所选仪器的单次即时数据e.取消操作：将取消还未开始执行的工作指令4.2.3 即时数据界面功能键说明双击左面仪器列表行，将显示对应的即时数据信息。
15无线系统中文使用说明书a. 曲线：显示曲线即时数据趋势图b. 数据：显示即时数据列表c. ：曲线按横坐标放大d. ：曲线按横坐标缩小红线代表通道1曲线，黄线代表通道2曲线；点击曲线上方的复选框，可以开关曲线显示。
4.3 启动管理界面4.3.1 启动管理主界面图16无线系统中文使用说明书4.3.2 逐个设置仪器启动时间（可延后）、间隔时间，报警范围4.3.3 启动管理功能键说明：a. 启动记录：可批量或单个启动所勾选的仪器，启动仪器后，仪器内原有数据将被覆盖。
如需重新启动记录仪，请先下载原有数据！17无线系统中文使用说明书b. 停止记录：可批量或单个停止所勾选仪器的记录状态；c. 设置报警：可重新设置报警范围d. 取消操作：将取消尚未执行的指令4.4 下载管理界面4.4.1 下载管理界面图示18无线系统中文使用说明书54.4.2 仪器下载设置：可按照需求选择每天定时、指定时间下载数据，如选无计划，则可手动下载。
194.4.3 设置模式：可下载全部数据，也可下载指定时间段的数据。
4.4.4 下载管理功能键说明：无线系统中文使用说明书a.下载数据：可批量或单个下载所有勾选的仪器历史数据；绿色进度条完成时，表示下载完成，可能需稍侯数分钟；b.取消下载：将取消尚未执行的指令操作。
204.5 历史数据界面4.5.1 历史数据界面图无线系统中文使用说明书勾选或单击所需操作的仪器，将出现该台仪器的历史数据列表，再双击历史数据列表行，会显示对应的历史数据信息。
4.5.2 设置所需操作的时间段，默认值为全部记录时间段；4.5.3 历史数据功能键说明：21a. 打印数据：分页打印所有历史数据，分为曲线打印和文本数据打印两种；默认A4纸张，打印时可重新设置纸张大小。
无线系统中文使用说明书22b.另存为：将所选仪器的历史数据保存，有软件格式和EXCEL 格式，两种格式可选。
建议使用软件.aprz格式。
无线系统中文使用说明书c. 打开文件：打开已保存过的数据文件，通过软件打开的文件只识别.aprz.234.5.4 历史数据显示模示分为三种，曲线、数据及概述a.曲线显示无线系统中文使用说明书b.数据显示24c.概述显示无线系统中文使用说明书4.5.5 按放大及缩小键可自动缩放数据坐标，移动时间条可查看任一时段的历史数据。
4.6 用户管理界面可根据实际增加用户、删除用户、修改密码；管理员权限：不仅可以使用软件各项基本功能，还可进行仪器添加、删除、退网，创建数据库等高级操作。