检测报告英文版
检测报告 英文版300字
检测报告英文版300字Title: Sample Test ReportIntroduction:This report provides the results of a test conducted on a sample product. The product was tested to ensure that it met the specifications required by the client. The test was conducted by a team of experts using advanced equipment and methods.Test Objectives:The main objective of the test was to determine whether the product met the safety and performance standards as set out by the client.Test Methodology:To test the product, the following methods were used:1. Visual inspection – the product was visually inspected to ensure that it was free of defects and damages.2. Functional testing – the product was tested for its functionality and performance based on its intended use.3. Safety testing – the product was tested to ensure that it met safety protocols and standards.Test Results:Based on the testing methods used, the following results were obtained:1. Visual inspection – the product was found to be free of defects and damages.2. Functional testing – the product was found to be functioning correctly andperformed well based on its intended use.3. Safety testing – the product was found to meet safety protocols and standards.Conclusion:Based on the results obtained, it can be concluded that the sample product met the specifications required by the client. The product is considered safe and performs well based on its intended use. This report is considered final and conclusive.Recommendations:There are no recommendations provided as the test results showed that the sample product met the required standards. However, it is recommended that the client uses these test results to support and verify the quality of the product.Appendix:The following are the details of the equipment used in the test:1. Visual Inspection – magnifying glass, flashlight.2. Functional Testing – computer software, hardware equipment.3. Safety Testing – Electrical testing equipment, environmental chambers, universal testing machine.SignedTester Name: ____________________Tester Signature: ____________________Date: ____________________。
出货检验报告 -中英文版
出货检验报告-中英文版出货检验报告-中英文版Shipment Inspection Report出货检验报告是集成了中文和英文内容的一份重要文件，用于记录产品出货前的质量检验结果。
该报告的制作旨在保证出货产品的安全与质量，从而形成对客户负责的良好形象，是企业管理中的重要组成部分。
The Shipment Inspection Report is an important document that integrates Chinese and English contents, which is used to record the quality inspection results of the products before shipment. The purpose of making this report is to ensure the safety and quality of the shipped products, so as to create a responsible and good image for customers, which is an important part of enterprise management.出货检验报告的格式通常包括产品基本信息、生产日期、生产批次、规格、数量、货运方式、检测结果等。
该报告内容简明清晰，应该包含出口货物所有标准检验项目和检验结果，以及检测员姓名和检验时间等信息。
The format of the Shipment Inspection Report usually includes basic information of the product, production date, production batch, specifications, quantity, shipping method, inspection results, etc. The content of the report should beconcise and clear. It should include all standard inspection items and inspection results of the exported goods, as well as information such as the name of the inspector and the inspection time.出货检验报告的作用主要体现在以下几个方面：1. 对企业的质量管理有利。
渗透检测报告中英文
渗透检测报告工件Work pie ce工件名称Name of work piece33寸轮辋加强环材质MaterialQ345B 订单号Order No. KH003-03 规格Specification33-13.00/2.5-5pc检测部位Checking Part加强环角焊缝数量Number14器材方法及参数InstrumentWays AndParameter渗透剂型号Penetrating Agent ModelHP-ST环境温度Circunstance Remperature20℃清洗剂型号penetrating Agent ModelYR-ST渗透时间Penetrating Time15分钟显像剂型号Raster Display Agent Mode lDY-ST显像时间Raster Displayer Time15分钟渗透剂施加方法penetrating Agent Adding Ways喷式Ways Of Spraying观察方法Observation Time目测Measure With Eyes 清洗方法Cleaning Ways喷式Ways of Spraying显像方法Raster Display喷式Ways of Spraying技术要求TechniqueRequirement要求检测比例Required Checking Proporation100％实际检测比例Actually Checking Proporation100％检测标准Examination StandardJB/T4730.5-2005合格级别Qualified RateⅡ级部分渗透探伤图片Partial penetration testing pictures检测结果(Examination result.)：按检测标准检测未发现超标缺陷，符合JB/T4730.5-2005 标准，合格。
No deficiency above limited standard is founded ，being aqual to JB/T4730.5-2005standard,qualified。
样品检验报告 中英文对照全面
NO.Category 类别Standard requirement标准要求Judgement 判定Note 备注1Print 、LOGO clearly,the size conform specified requirements 印字、标识清晰易识别大小符合规定要求PASS2cable 、conn.color meet the requirement of customer线材、插头颜色与客户要求一致PASS3Without damage, skin, indentation,wrap up abnormal particles, etc 无破损、压线皮、压痕、起包起颗粒等异常PASS41.Flash less than 0.5 批锋小于0.5.2.Molding gap less than0.15开口不超过0.153.No more glue, flow lines,indentation 无胶、流纹、压痕;PASSIn bulk 散装PASS PE bag packing PE 袋包装PASS No scratch and dislocation 无刮伤错位PASS 62000±50PASS 7 5.0+0.2/-0.2PASS 89.0±0.3PASS 9No open & short miss wire无开路、短路、错位等现象PASS 10300V DC/10ms,≥10MΩPASS 11≤3ΩPASS 12F ≤44.1-139.8≤F ≤39.2-14Other 其它 Sample Check Reportmm Coduction test 成品导通测试A p p e a r a n c e 外观Dimension 结构尺寸Judgement 判定结果■ 合格 PASS □ 不合格 NGSHENZHEN EAST-TOPTECH ELECTRONIC TECHNOLOGY CO.,LTD深圳市东景盛电子技术有限公司Conform specified 符合规格要求Mechanical 机械性能-3Ω Max 5.02/5.03/4.99/5.01/5.02Conform specified 符合规格要求9.0/9.1/9.20/9.15/9.10No open & short miss wire 无开路、短路、错位等现象2003/2010/2005/2011/2015-Electric Tes t电气测试-Insulation test 绝缘测试MΩOD 线材直径Conform specified 符合规格要求Color 颜色Cable 线材部分-10MΩ Max Conform specified 符合规格要求Conform specified 符合规格要求Without damage, skin,indentation, wrap up abnormal particles, etc无破损、压线皮、压痕、起包起颗粒等异常mm Check result 检验结果Check Date 检验日期2014-9-22Check Cat.检验类型：All Review 全检-Product Cat.产品类型HDMI CableCheck area 检验地点Unit 单位-Length 成品长度mm mmExposure线头外露尺寸mm OQC AreaCustomer name 客户名称Check Item 检测项目5Conn.插头部分Print 、LOGO 印字、标志Sample Q'ty 样品数量/5PCS Packing 包装部分Conform specified 符合规格要求Risistance test 直流电阻测试Withdrawal test 拔出力测试ΩInsertion test 插入力测试N NNo.报告编号：DJS-OQC-0140922A001(2.0M)表单编号:DJS-QR-033。
射线中英文报告
√手工 Manual
5 Min, 20 ℃
2.0 ~4.0
检测标准 Acc. Standard
JB/T4730.2-2005
检测工艺编号 Exam. Process No
JN/QD8.2-01-07
合格片数
Qualified Film Number
A 类焊缝 Categories A
张
B 类焊缝
相交焊缝
焦点尺寸 Focus Size
2*2
胶片牌号 Film Brand
增感方式 Intensifying Means
Pb
前屏Front0.03mm
后屏Back 0.1mm
胶片规格 Film Size
象质计型号 Type of Image Quality Indicator
Ⅲ/Ⅱ
冲洗条件 Washing Method
Seam Length 一次透照长度
Once Radiographic Length 合格级别 （级）
Qualified Level 要求检测比例 %
Required Test Ratio 实际检测比例 %
Actual Test Ratio 扩探比例 %
Extended Test Ratio源自□自动 Auto.检
显影液配方 Content of Developing Liquid
天山
显影条件 Developing Condition
测
照相质量等级
条
Illumination Level
焊缝编号 Seam No
件
板厚 mm
及
Plate Thickness
工
透照方式
Radiography Method
检测报告 英文版
检验报告TEST REPORT产品名称:Name of Product圆形逆流式玻璃钢冷却塔生产单位：Manufacturer 山东格瑞德集团有限公司检验类别:Test Category 出厂检验山东格瑞德集团有限公司SHANDONG GRAD GROUP CO.,LTD冷却塔出厂检验报告The cooling tower ex- factory survey report项目名称Project name 沈阳仪器仪表制造有限公司Shenyang instrumentmanufacturing co., LTD规格型号Standard and modelnumberGBNL3-80产品编号Products Number 121228出厂日期Release date 12.12.28序号Serial number检验项目Inspection item标准要求Standard request检验结果Check result1玻璃钢外观Exterior condition of theglass fibre reinforced plastic1.胶衣层表面应光滑,无裂纹,色泽均匀;Surface of the gelcoatmust sleekness levelingshade and no crackle；2.塔体外表面上直径3mm-5mm的气泡在一平方内不超过3个,无直径大于5mm的气泡;The bubble's diameter that合格Qualified合格Qualifiedin 3mm-5mm not morethan three withincentare of the coolingtower's surface ，hasn'tbubble that the diameterabove 5mm.2 树脂含量Resin content 45%--55% 49%3玻璃钢弯曲强度Bending strength of theglass fibre reinforced plastic≥147MPa 294MPa4玻璃钢巴氏硬度Barcol hardness of theglass fibre reinforced plastic≥35 61综合判定Integrative judgment合格Quality products综合评价Overall merit该冷却塔经综合判定为合格产品This cooling tower is a quality product by overall merit.检验员: 徐红艳日期:12.12.28 Checker: hongyan Xu Date:8th Dec.08【本文档内容可以自由复制内容或自由编辑修改内容期待你的好评和关注，我们将会做得更好】。
中英文对照的质检报告
检测报告 英文
检测报告英文Detections Report:1. Malware: No malware was found on the system during the scan. The system is clean and secure.2. Vulnerabilities: Multiple vulnerabilities were detected on the system. These vulnerabilities could potentially be exploited by an attacker to gain unauthorized access or control over the system. It is recommended to patch or update the affected software to eliminate these vulnerabilities.3. Suspicious Activities: Some suspicious activities were detected on the system. These activities may indicate unauthorized access or unusual behavior that warrants further investigation. It is recommended to review the system logs and implement necessary security measures to prevent future suspicious activities.4. Network Intrusion: No network intrusion was detected during the scan. The system's network security measures appear to be effective in preventing unauthorized access from external sources.5. Data Leakage: No data leakage was detected on the system. Data appears to be adequately protected and there is no evidence of unauthorized access or transfer of sensitive information.6. Phishing: No phishing attempts were detected during the scan. The system is not currently being targeted by phishing attacks.7. Firewall Configuration: The firewall configuration on the system appears to be effective in preventing unauthorized network traffic. No vulnerabilities or misconfigurations were detected.8. Email Security: The email security measures in place on the system seem to be effective in blocking suspicious or malicious emails. No phishing or malware-laden emails were detected during the scan.9. Web Application Security: The web applications on the system were scanned for vulnerabilities. No critical vulnerabilities were found, but some medium severity vulnerabilities were identified. It is recommended to address these vulnerabilities to enhance web application security.10. Antivirus Protection: The antivirus software on the system scanned all files and found no malware. The antivirus protection appears to be up-to-date and fully functional.Conclusion: Overall, the system appears to be in good condition with no malware infections. However, it is important to address the detected vulnerabilities and medium severity vulnerabilities in the web applications to further enhance the system's security. Regular security updates, monitoring, and ongoing maintenance are recommended to ensure continued protection against potential threats.。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
Surface of thegelcoatmust sleeknessleveling shadeand no crackle；
2.塔体外表面上直径3mm-5mm的气泡在一平方内不超过3个,无直径大于5mm的气泡;
The bubble's diameter that in 3mm-5mm not more than three within centare of the cooling tower's surface ，hasn't bubble that the diameter above 5mm.
合格
Qualified
合格
Qualified
2
树脂含量Resin content
45%--55%
49%
3
玻璃钢弯曲强度
Bending strength of the glass fibre reinforced plastic
≥147MPa
294MPa
4
玻璃钢巴氏硬度
Barcol hardness of the glass fibre reinforced plastic
Checker: hongyan Xu Date:8th
冷却塔出厂检验报告
The cooling tower ex- factory survey report
项目名称
Project
name
沈阳仪器仪表制造有限公司
Shenyang instrument manufacturing co., LTD
规格型号
Standard and model number
产品编号
Products Number
121228
出厂日期
Release date
序号
Serial number
标准要求
Standard request
检验结果
Check result
1
玻璃钢外观
Exterior condition of the glass fibre reinforced plastic
检 验 报 告
TEST REPORT
产 品 名 称:
Name of Product圆形逆流式玻璃钢冷却塔
生 产 单 位：
Manufacturer山东格瑞德集团有限公司
检 验 类 别:
Test Category出 厂 检 验
山 东 格 瑞 德 集 团 有 限 公 司
SHANDONG GRAD GROUP CO.,LTD
≥35
61
综合判定
Integrative judgment
合格
Quality products
综合评价
Overall merit
该冷却塔经综合判定为合格产品
This cooling tower is a quality product by overall merit.
检验员: 徐红艳 日期:12.12.28