AdvanTrol-Pro软件安装规范

合集下载

浙大中控DCS系统AdvanTrol Pro软件培训-编程基础

二、图形化编程基础
培训什么？ • 主要内容：主要内容：
1. 2. 3. 4. 5. 6. 工程、段落、区段编程基本步骤工程管理数据类型变量系统资源
工程、段落、区段
工程
SControl用一个工程（Project）描述一个控制站的所有程序。每个工程唯一对应一个控制站，工程必须指定其对应的控制站地址。
新建工程
工程与组态关联
注意：工程与主控制卡的地址对应关系
新建段落
• 按编辑类型可将段落分类为
FBD段落 LD段落 SFC段落 ST语言段落 • 按程序类型分可将段落分类为：程序段落模块段落
工程管理
工程管理包括段落管理段落的名称管理，导入导出任务管理段落执行的次序
练习
请大家花10分钟的时间： 1、熟悉软件界面 2、新建一个工程：练习 3、新建几个段落：LD1\LD2\LD3 4、调整段落的执行次序
变量定义演示
请教师演示新建自定义变量、全局变量和私有变量；请学员练习5分钟，熟悉三种不同变量的定义方法和应用场合及各自特点。
谢谢！
变量分类
变量按作用范围可分四类：自定义变量作用范围：整个组态，包括图形化工程和操作组态全局变量作用范围：整个图形化工程，包括各个段落私有变量作用范围：只在该段落起作用输入变量与输出变量作用范围：只在自定义段落（自定义功能块）中起作用
变量查找与替换
根据所查找目标数据源的分类（当前段、当前工程）进行变量、位号以及模块的替换。在替换框内填入欲替换的的目标名（可以是变量、位号或者模块）
数据类型
图形化软件提供的变量数据类型
半浮点——2字节
半浮点的数据结构所有模拟量的测量值都是半浮点数无因次化处理公式半浮点数运算注意事项（溢出）

AdvanTrol-Pro(v2.50)学习版软件在DCS实训教学中的使用

件的工程师掌握控制系统的组态工作流程和各软件的基本使用让学生灵活准备所需要的实用文件，比如说确定系统控制的规方法。所以对于刚接触到ＤＣＳ实训课程的教师及进入到ＤＣＳ实模、操作站与现场控制站的ＩＰ地址分配表、测点清单（注明注释、
训课程学习的学生来讲，都具有很高的学习和使用价值。该软件位号、接入的卡件、地址）、卡件分配表（注明名称、槽位、通道数
理论与实践
１２５
ＡｄｖａｎＴｒｏｌ — Ｐｒｏ（ｖ２．５ｏ）学习版软件在ＤＣＳ实训教学中的使用
朱静山（电气技术与自Байду номын сангаас化系）
摘要：对于化工自动化及仪表专业来说，ＤＣＳ实训课程是一个非常重要的综合性实训课程，而软件的学习是该实训课程中非常重要的一个环节。如果采用浙大中控的ＤＣＳ系统作为实训平台的话，我们可以采用它的ＡｄｖａｎＴｒｏｌ — Ｐｒｏ
中去。在具体的课题中，组态是必不可少的，而组态就要用到软站组态两方面的内容。件，可以边分析控制过程和硬件边组态，在这个过程当中逐渐加
对于具体的组态来讲，组态对应的项目是死的，但是项目里面的内容是活的，即来自于我们的工程设计。各个项目之间也是
在实际教学中可以把该软件的学习融人到ＤＣＳ控制的课题有联系的，所以要做到整体上的把握，它包括控制站组态、操作
（ｖ２．５０）学习版软件作为系统组态的学习软件。该软件为中文界面，功能齐全，易于接受，对于刚接触到ＤＣＳ实训课程

浙大中控DCS系统AdvanTrol Pro软件培训-实时监控

监控登录及主界面介绍
实时监控的作用
作用：
对系统进行实时监视、控制操作、数据采集、数据管理的平台。
软件特点
用户界面友好，操作简单采用实时数据库 • 运行环境上，除AdvanTrol本身运行外，还有AdvRTDC （实时数据服务）、AdvHisdata（报警、趋势记录）和AdvDiagRec（故障诊断记录）在后台运行提供实时和历史数据读取数据更新周期1秒，动态参数刷新周期1秒支持网络实时数据库 • 弹出式流程图可以赋在监控中的任何画面上
系统服务__时钟同步设置
系统服务__热键屏蔽设置
主要应用于普通键盘。需要有此授权的用户登陆时才可使用此功能。
系统服务__打印配置设置
系统服务__用户管理
• 实时监控操作
主要内容
1. 2. 3. 4. 5. 6. 7. 8. 报警一览（报警确认、消音）—ＡＬ控制分组—ＣＧ调整画面—ＴＮ趋势图—ＴＧ流程图（弹出式流程图） —ＧＲ数据一览—ＤＶ系统总貌—ＯＶ故障诊断
监控启动窗口介绍
操作界面介绍
操作界面介绍
综合信息栏
7类画面类型： OV：系统总貌 CG：控制分组 TG：趋势画面 DV：数据一览 TN：调整画面 GR：流程画面 AL：报警一览其中的调整画面（TN）、报警一览（AL）页面没有页码值。
权限： V：观察 O：操作员 E：工程师 P：特权
系统操作
报警类型表
分组画面内部仪表
项目仪表个数规格位号数
可以显示的画面
控制分组、调整画面、流程图
显示元素
位号名称、位号属性、位号值、改变状态按钮、位号类型、位号描述跟位号或回路类型有关
数据显示显显示数据

2010 016附录E：AdvanTrol-Pro V2.65+SP04学习版软件安装规范

图 2-4 客户信息的填写界面 4. 点击“下一步（N）”，进入 AdvanTrol-Pro (V2.65.04.00)学习版路径的选择，如图 2-5 所示：
图 2-5 AdvanTrol-Pro（V2.65.04.00）学习版路径的选择界面 5. 在上图中选择安装的路径后，点击“下一步（N）”，进入“安装类型”的选择界面，如图 2-6 所示：
图 2-1 准备安装 AdvanTrol-Pro (V2.65.04.00-091211-CD)的安装窗口按照安装向导的提示，一步一步进行安装。 1. 进入“AdvanTrol-Pro (V2.65.04.00)学习版安装”的对话框，如图 2-2 所示：
1
AdvanTrol-Pro (V2.65.04.00-091211-CD)软件安装规范
AdvanTrol-Pro(V2.65.0 4.00091211 -C D) AdvanTrol-Pro(V2.65.04 .00-091211 091211-C -CD
软件安装规范
浙江中控技术股份有限公司
AdvanTrol-Pro (V2.65.04.00-091211-CD)软件安装规范
标志符定义
图 2-2 AdvanTrol-Pro(V2.65.04.00)学习版安装界面的窗口 2. 点击“下一步（N）”，进入“许可证协议”的选择界面，如图 2-3 所示：
图 2-3 许可证协议的选择界面 3. 点击“是（Y）”，进入“客户信息”安装界面，输入客户信息，如图 2-4 所示：
2
AdvanTrol-Pro (V2.65.04.00-091211-CD)软件安装规范
5
AdvanTrol-Pro (V2.65.04.00-091211-CD)软件安装规范

浙大中控DCS系统AdvanTrol Pro软件培训-程梯形图(LD)语言

图形化组态
浙江中控技术有限公司
三、梯形图（LD）语言梯形图（LD）
培训什么？ • 主要内容：主要内容：
1. 2. 3. 4. 5. 6. LD概述触点、线圈、垂直连接线功能块介绍模块库介绍常用功能块应用举例编程注接触器、继电器梯形图基础上演变而来，与电气操作原理相呼应，形象、直观和实用。触点和线圈来构建逻辑控制方案很容易将电气联锁图转换为梯形图程序联锁程序习惯使用梯形图语言进行编辑
TON定时器模块
TON定时器模块
定时器的基准为控制周期，定时时间必须设置为运行周期的整数倍。
例：如果KI101为ON,延时10秒，KO101为ON；如果KI101为OFF,KO101为OFF。
定时器--TP
定时器--TP
• 该模块用于产生持续时间一定的脉冲。
定时器的基准为控制周期，定时时间必须设置为运行周期的整数倍。
编程示例1
LD编辑器—垂直连接线
垂直连接线可以同时连接多个输入和多个输出，相当于或的功能，连接线的左边作为或的输入，右边作为或的输出。垂直连接线上可以连接所有布尔量的数据链路，包括所有触点、线圈及功能块的布尔量引脚。
编程示例2
例2：当开关DI101为ON,或者开关DI102为OFF 时电机DJ101为ON；DI101为OFF,且DI102为 ON,则DJ101为OFF。
编程示例2
在工程设计中，我们经常使用在工程设计中， SAMA图表示各种逻辑关系图表示各种逻辑关系。 SAMA图表示各种逻辑关系。
什么是SAMA图呢？
什么叫SAMA图？
SAMA图是美国制造等协会制定的一种规范，它使用各种图符如：加、减、乘、除、微分、积分、或门、与门、切换、最大值、最小值、上限幅、下限幅等，将控制系统要进行何种运算处理表达出来. 简单的说，SAMA图是有关工程技术人员进行技术交流的一种公认的图符或者说工程语言。

美国阿尔弗雷德 APM 系列软件安装指南说明书

Software Installation Guide NOTE:Read the entire Software Installation Guide before usingthe APM for Windows software.SAFETY CONSIDERATIONSInstalling and servicing heating equipment can be hazardous due togas and electrical components.Only trained and qualified servicepersonnel should install,repair,or service heating equipment.Untrained personnel can perform basic maintenance functions suchas cleaning coils,or cleaning and replacing filters.All otheroperations should be performed by trained service personnel.When working on heating equipment,observe precautions inliterature,on tags,and on labels attached to or shipped with theunit,and other safety precautions that may apply.Follow all safety codes.In the United States,follow all safetycodes including the National Fuel Gas Code(NFGC)NFPA54/ANSI Z223.1--2006.In Canada,refer to the National Standardof Canada Natural Gas and Propane Installation Codes(NSCNGPIC),CAN/CSA149.1--05.Wear safety glasses and work gloves.Have a fire extinguisheravailable during start--up,adjustment procedures,and service calls.Recognize safety information.This is the safety--alert symbolWhen you see this symbol on the furnace and in instructions ormanuals,be alert to the potential for personal injury. Understand the signal words DANGER,WARNING,CAUTION,and NOTE.The words DANGER,WARNING,and CAUTION are used with the safety--alert symbol.DANGER identifies themost serious hazards which will result in severe personal injury or death.WARNING signifies hazards which could result in personal injury or death.CAUTION is used to identify unsafe practices which would result in minor personal injury,or product and property damage.NOTE is used to highlight suggestions which will result in enhanced installation,reliability,or operation.INTRODUCTIONThe Advanced Product Monitor--APM(Furnace Version)is asoftware package that can be used for sales demonstrations, training,and to start--up and troubleshoot Variable Speed Furnaces.APM(Furnace Version)has been tested and approved for use on furnace control boards P/N HK42FZ001,HK42FZ002, CESO130004--00,HK42FZ003,HK42FZ012,HK42FZ021, HK42FZ022,HK42FZ024,HK42FZ026,and HK42FZ031. Because the Advanced Product Monitor runs on a portable laptop PC,it can be carried anywhere to provide the service technician with local access to any Variable Speed Furnace.The Advanced Product Monitor enables a service technician to perform the following tasks:S Monitor furnace parameters.S Save furnace parameters to disk.S Data Log furnace parameters.S Force the furnace into high fire.(All Boards except P/NHK42FZ021,HK42FZ022,HK42FZ024,HK42FZ026,&HK42FZ031)S Force the furnace into low fire.(Board P/N HK42FZ003&HK42FZ012only)S Review the entire furnace fault history.S Review the recent faults in furnace fault history.S Review the last fault that occurred.(Board P/N HK42FZ003, HK42FZ012,HK42FZ021,HK42FZ022,HK42FZ024,HK42FZ026,&HK42FZ031only)S Display troubleshooting information for each fault code.S Save the furnace fault history to disk.S Clear the furnace fault history.S Review the furnace statistics.S Save the furnace statistics to disk.The Advanced Product Monitor has the following NEW capabilities:S Supports new Step--Modulating furnaces.S Supports SPP gas--fired units with ABCD User Interface Connections.S Can be spliced into any ABCD User Interface Connection point. This allows furnace troubleshooting at the outdoor unit.The Advanced Product Monitor is designed for ease of operation.It utilizes menus,special function keys,plain language prompts, and standardized screen format.If you have a PC,or are considering purchasing a PC,the following general requirements should apply:S PC using Pentium233or higher microprocessor.PCs with486 to Pentium200microprocessor’s will work but the ABCDconnector to the User Interface must be disconnected.S At least16Mb(or more)of system memory.S At least6Mb(or more)of free hard drive storage space.S3.5”floppy drive or CD--ROM drive.S Windows95,98,ME,NT,2000,XP or Vista.S RS232port.Adapter required for USB only computers.S VGA display.Included with the Advanced Product Monitor is a B&B RS485 adapter and an interface cable that will connect any of the following furnace control boards P/N HK42FZ003,HK42FZ012, HK42FZ021,HK42FZ022,HK42FZ024,HK42FZ026,& HK42FZ031to a PC.This cable has3stripped and tinned leads on one end and three separate connections on the other end.The stripped leads connect to the B&B RS485adapter.The WHITE housing connects to furnace control P/N HK42FZ003or HK42FZ012at the3--pin communication connector PL--6.The GREEN ABCD PLUG housing connects to furnace control HK42FZ021,HK42FZ022,HK42FZ024,HK42FZ026or HK42FZ031at the4--pin ABCD connector PL7.The GREEN ABCD RECEPTACLE housing in combination with the GREEN ABCD PLUG housing allows you to splice in the APM at any ABCD User Interface connection point except for the one at the User Interface.This allows you to check the furnace from the outdoor unit.NOTE:You will need an APM adapter harness to connect the interface cable to first generation furnace control boards P/N HK42FZ001,HK42FZ002,or CESO130004.These adapter harnesses were distributed years ago and are no longer available. This installation guide has the following sections:I.INSTALL RS232/485ADAPTERII.INSTALLING APM SOFTWAREIII.CONNECTING FURNACE TO PCIV.RUNNING APMV.PALM PILOT APM VERSIONVI.WINDOWS MOBILE5APM VERSIONI.INSTALL RS232/485ADAPTERIn order to interface the Advanced Product Monitor to the variable speed furnace a B&B RS485adapter(B&B485SD9TB)is supplied in the APM kit.ing the B&B converterPlug the B&B RS485adapter into the serial port of your PC. NOTE:If your PC has a25pin connector,an DB25F--DB9M adapter will be required.This standard adapter is available online or at some retail outlets.NOTE:If your PC has only USB connections,a USB to RS--232 adapter will be required.These adapters are available online or at most retail outlets that also sell computers.Reference Appendix A in the APM manual installed on the CD for a list of websites that have compatible adapters.The APM manual is located in the Manual folder.You will need to install the USB serial driver that comes with your USB to RS--232adapter prior to hardware installation.The B&B RS485adapter has a terminal block with5terminals. You will need to connect the interface cable to the terminal block on the B&B RS485adapter.Follow the instructions below to connect the interface cable to the B&B RS485adapter terminal block.(See Fig.1).1.Insert the BLACK wire into the terminal labeled TD(A)onthe B&B RS485adapter and tighten the screw.2.Insert the GREEN wire into the terminal labeled TD(B)onthe B&B RS485adapter and tighten the screw.3.Insert the WHITE wire into the terminal labeled GND onthe B&B RS485adapter and tighten the screw.4.Route wire tie through holes in circuit board portion ofB&B RS485adapter and tighten around cable to providestrain relief.NOTE:The terminals labeled GND and+12V are generally not used because most PCs supply power to the serial port.In the event your PC does not supply power to the serial port you will need to supply external power to the B&B RS485adapter using a12VDC power supply or a9volt transistor battery.II.INSTALLING APM SOFTWAREIn the instructions that follow,it is assumed that the E:drive letter corresponds to the computer’s CD--ROM drive and that the A: drive letter corresponds to the computer’s floppy drive.If this is not the case,please modify the instructions accordingly for your computer’s drive letters.B.Creating Floppy Disk Install SetIf you are installing the APM software onto a computer that does not have a CD--ROM drive,you must first create the floppy disk images.The APM CD--ROM contains compressed self--extracting floppy disk images of the APM install program that need to be copied to4blank,IBM formatted,1.44Mb,3.5”floppy disks.In order to create the floppy disk images,you will need to use a computer that has both a CD--ROM drive and a floppy disk drive. To create the floppy disk images and extract them to the target computer’s hard drive,follow these steps:1.Start windows and insert the APM CD into your CD--ROMdrive.The APM installation routine should automaticallylaunch.Click Cancel to stop the installation.2.Click on the Start button at the bottom left corner and se-lect Run...from the resulting menu.Type E:\mkfloppy A:E:in the text field of the resulting Run dialog then click theOK button.3.When prompted,insert a blank,IBM--formatted,1.44Mbfloppy disk into the computer’s floppy drive and press theEnter key.When the copy has completed,eject the floppydisk and label it APM Disk1of4.4.Insert another blank,IBM--formatted,1.44Mb floppy diskinto the computer’s floppy drive and press the Enter key.When the copy has completed,eject the floppy disk and la-bel it APM Disk2of4.5.Repeat this methodology until all4disk images are created.6.To extract these files to a computer without a CD--ROMdrive insert APM Disk1of4into the A:drive and click onthe Start button at the bottom left corner and select Run...from the resulting menu.Type A:\apm.exe in the text fieldof the resulting Run dialog then click the OK button.Thesefiles will be extracted to a temporary folder namedC:\apmtemp.7.When prompted insert each APM disk until all the com-pressed files are extracted.C.Installing APMBefore you can run the APM program,you must install it.If your computer does not have a CD--ROM drive,you need to create floppy disk images and extract them to the target computer’s hard drive by following the instructions in the previous section.The following instructions apply whether you are installing from the CD--ROM or the extracted files loaded on a computer’s hard drive using floppy disk images.To install the APM software follow these steps:1.Start windows and insert the APM CD into your CD--ROMdrive.The APM installation routine should automaticallylaunch.If it does not automatically launch click on the Startbutton at the bottom left corner and select Run...from theresulting menu.Type E:\setup in the text field of theresult-ing Run dialog then click the OK button.If your computer does not have a CD--ROM and you ex-tracted the floppy disk images to computer’s hard drive thenclick on the Start button at the bottom left corner and selectRun...from the resulting menu.Type C:\apmtemp\setupin the text field of the resulting Run dialog then click theOK button.2.Click Next and follow the on--screen instructions.3.Choose a destination location for the software.The setupprogram will automatically install the APM program in thefolder shown in the window,or you may select anotherfolder.Make your selection and click Next.NOTE:When installing in Windows Vista change the default folder to C:\APM\.Windows Vista prevents programs from writing to any file located in the Program Files folder.If the APM program is installed in the default folder the APM program will not be able to data log or save any views to file.In addition you will have to select the proper COM port every time the APM program is started.4.If you would like to change any selections click on the<Back button,otherwise click on the Install button.5.Once the installation is complete,click on the Finish but-ton.6.Upon successful completion,the installation program willput two new icons on the e the APM icon tolaunch the APM application.The APM Output Files foldericon is the location in which any files created by the APMapplication are stored.III.CONNECTING FURNACE TO PCThe interface cable is connected between the furnace control and the B&B RS485adapter as shown in Fig.1.The GREEN ABCD PLUG housing connects to furnace control HK42FZ021, HK42FZ022,HK42FZ024,or HK42FZ026at the4--pin ABCD connector PL7.The GREEN ABCD RECEPTACLE housing in combination with the GREEN ABCD PLUG housing allows you to splice in the APM at any ABCD User Interface connection point except for the one at the User Interface.The WHITE housing is an alternate connector that connects to furnace control P/N HK42FZ003or HK42FZ012at the3pin communication connector PL6.NOTE:You will need an APM adapter harness to connect the interface cable to first generation furnace control boards P/N HK42FZ001,HK42FZ002,or CESO130004.These adapter harnesses were distributed years ago and are no longer available. The following steps should be performed when connecting the inter-face cable and B&B RS485adapter between the furnace control P/N HK42FZ021,HK42FZ022,HK42FZ024,or HK42FZ026and PC:1.Turn off power at main disconnect.2.Remove access doors.3.Route the interface cable to the furnace control.4.Connect GREEN ABCD PLUG housing on the interfacecable to the furnace board4--pin ABCD connector PL7justbehind the model plug on the lower left side of the furnaceboard.See Fig.1for location.If a User Interface connectionis currently connected to the4--pin ABCD connector PL7disconnect it and plug it into the GREEN ABCDRECEPTACLE housing on the interface cable and thenconnect the GREEN ABCD PLUG housing on the interfacecable to the furnace board4--pin ABCD connector PL7.5.Reinstall access panel and door.6.Connect the opposite end of the furnace cable to the B&Bconverter as shown in Fig.1.7.Turn on electrical power and wait10seconds before run-ning the APM software.CONNECT TO COMPUTER SERIAL PORTB&B RS485 ADAPTER485SD9TBD A08241Fig.1--Furnace ControlIV.RUNNING APMThis section gives you a quick tour of the Advanced Product Monitor so you can start using it right away.To run the Advanced Product Monitor follow these steps:1.Start windows.2.Double--click on the icon labeled APM on your desktop.3.If everything is connected properly the computer willprompt you to enter the serial number of the unit(1to10characters)and click the OK button.NOTE:It may take as long as30seconds before the computer prompts you to enter the serial number.When prompted at least one character must be entered.In addition a name can be given instead of a serial number.See the example shown in Fig.2,where ”thisunit”isentered:A08242 Fig.2--Serial Number ExampleIf the screen shown in Fig.3appears,check your wiring,connector orientation,and whether the board is powered.If OK change your COM port because your PC may already be using COM1for a modem.If you are still having problems you may need to power the RS485adapter.Refer to the last NOTE in SectionI.A08243 Fig.3--Communications Failure Dialog4.After entering the serial number the screen shown in Fig.4should appear when using furnace control board P/NHK42FZ021,HK42FZ022,HK42FZ024,or HK42FZ026.Similar screens will appear with oldercontrols.A08244Fig.4--Screen Image—To monitor the system,click on the System Status tab.—To review the furnace fault codes and error messages,click on the Fault History tab.—To review the furnace statistics,click on the Statisticstab.—To exit the program,select File |Exit from the menu bar.NOTE :To take full advantage of the APM software features,please refer to the APM manual installed on the CD.It is located in the Manual folder.V .PALM PILOT APM VERSIONIncluded on the APM for Windows CD is a Palm Pilot version of the plete instructions are located in the palmAPM folder.VI.WINDOWS MOBILE 5APM VERSIONIncluded on the APM for Windows CD is a Windows Mobile 5version of the plete instructions are located in the winmobileAPM folder.Copyright 2010CAC /BDP D 7310W.Morris St.D Indianapolis,IN 46231Printed in U.S.A.Edition Date:09/10Manufacturer reserves the right tochange,at any time,specifications and designs without notice and without obligations.Catalog No:IIKKGASD0301APM002Replaces:IIKKGASD0301APM001。

浙大中控用户授权使用手册

AdvanTrol-Pro V2.65用户授权使用手册浙江中控技术股份有限公司声明严禁转载本手册的部分或全部内容。

在不经预告和联系的情况下，本手册的内容有可能发生变更，请谅解。

本手册所记载的内容，不排除有误记或遗漏的可能性。

如对本手册内容有疑问，请与我公司联系。

文档标志符定义警告：标示有可能导致人身伤亡或设备损坏的信息。

WARNING: Indicates information that a potentially hazardous situation which, if not avoided, could result in serious injury or death.电击危险：标示有可能产生电击危险的信息。

Risk of electrical shock: Indicates information that Potential shock hazard where HAZARDOUS LIVE voltages greater than 30V RMS, 42.4V peak, or 60V DC may be accessible.防止静电：标示防止静电损坏设备的信息。

ESD HAZARD: Indicates information that Danger of an electro-static discharge to which equipment may be sensitive. Observe precautions for handling electrostatic sensitive devices注意：提醒需要特别注意的信息。

ATTENTION: Identifies information that requires special consideration.提示：标记对用户的建议或提示。

TIP：Identifies advice or hints for the user.目录用户授权 (1)1 功能概述 (1)2 启动用户授权软件 (1)2.1 SCKey新建组态 (1)2.2 启动用户授权软件 (2)3 用户授权界面介绍 (2)4 用户列表 (3)4.1 单个用户 (4)5 角色列表 (5)5.1 单个角色 (5)5.2 角色的功能权限 (6)5.3 角色的数据权限 (7)5.4 角色的特殊位号权限 (8)5.5 角色的自定义权限 (9)5.6 角色的操作小组权限 (9)5.7 用户列表 (10)6 自定义权限列表 (10)7 向导功能介绍 (10)8 编译区介绍 (11)9 内部规则介绍 (12)10 应用举例 (12)11 资料版本说明 (20)用户授权1功能概述用户授权软件主要是对用户信息进行组态，其功能如下：¾一个用户关联一个角色。

浙大中控DCS系统AdvanTrol_Pro软件培训-编程站间通讯应用

控制站间的数据交换
SETBIT模块的功能与前面的模块类似，是在输入的 DWORD型值的指定位置设置开关数据，再赋给输出值。也就是，在已存在的DWORD型值的某一位上设置开关数据，其余不变，然后输出。
输入引脚X上连接了一个DWORD变量，输入引脚Q上连接的就示需要在其他站点上被调用的数据位号，输入引脚SERIAL上连接的数字表示该布尔型位号在双字的g_msg变量中存放的位置序号（0表示放在最低位，31 表示放在最高位）。将所需的数据存储在DWORD变量指定位置后，将数值改变后的DWORD变量从输出引脚Y输出。
控制站间的数据交换
Setbit函数是向长整数中放bool数据的函数。
y=setbit(长整型数据,bool数据,0、1…31)；长整型数据为被写的数据源， bool数据为所需存放的数据， 0、1…31表示在长整型数据的哪一位上存放数据，函数运算的结果就是向长整数中放bool数据。
控制站间的数据交换
控制站间的数据交换
控制站间的数据交换
对于一个较大的系统，往往无法做到将程序需要调用的位号集中在一个控制站中。这里，就需要进行数据的站间调用。
控制站间的数据交换
为了实现在控制站间交换数据，每个控制站开辟了一片共享数据区，用以存放共享数据。数据区内有 128*4个字节描述为 LONG g_msg[128] (在SCControl 中数据类型为DWORD)。为了最灵活经济的使用这片数据区，系统定义了一系列函数处理各种数据类型从数据区的放入和取出。通过sendmsg和getmsg执行发送和接收工作。
发送：那么，在地址为2的控制站中，编写一段程序，程序中，将３个模拟量和４个开关量分别存放在２个g_msg变量中，为了方便起见，程序中使用了g_msg[0]和g_msg[1] 。然后将这两个g_msg发送出去。

1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。

防止静电：标示防止静电损坏设备的信息。
ESD HAZARD: Indicates information that Danger of an electro-static discharge to which equipment may be sensitive. Observe precautions for handling electrostatic sensitive devices
4
AdvanTrol-Pro 软件安装规范
时，可根据需要安装相应的类型：操作站安装：安装操作站组件，包括库文件、AdvanTrol 实时监控软件、用户授权管理软件，这种安装方式下，操作人员无法进行组态操作。工程师站安装：安装工程师站组件，包括库文件、AdvanTrol 实时监控软件、SCKey 组态软件、ScForm 报表制作软件、SCX 语言编程软件、SCControl 图形编程软件、SCDraw 流程图制作软件、二次计算软件、用户授权管理软件、数据提取软件。数据站安装：包括数据采集组件、报警、操作记录服务器和趋势服务器。完全安装：将安装所有组件。 6) 选择“工程师站安装”，点击“下一步（N）”，进入“复制文件”的界面，如图 2-7 所示：
AdvanTrol-Pro 软件
安装规范
浙江中控技术股份有限公司
声
� �
�
明
严禁转载本手册的部分或全部内容。在不经预告和联系的情况下，本手册的内容有可能发生变更，请谅解。本手册所记载的内容，不排除有误记或遗漏的可能性。如对本手册内容有疑问，请与我公司联系。
文档标志符定义
警告：标示有可能导致人身伤亡或设备损坏的信息。
AdvanTrol-Pro 软件安装规范
AdvanTrol-Pro 软件安装规范
1 软件安装运行环境
Windows 2000 Windows 2000 下 AdvanTro-Pro 软件运行的系统平台是 Windows 2000 Professional+SP4，在执行 AdvanTro-Pro 软件安装之前，应先按照《Windows 2000 装机规范》安装 Windows 2000 操作系统。 Windows XP Windows XP 下 AdvanTro-Pro 软件运行的系统平台是 Windows XP Professional+SP2 ，在执行 AdvanTro-Pro 软件安装之前，应先按照《Windows XP 装机规范》安装 Windows XP 操作系统。 Windows 7 Windows 7 下 AdvanTro-Pro 软件运行的系统平台是 Windows 7 专业版，在执行 AdvanTro-Pro 软件安装之前，应先按照《Windows 7 装机规范》安装 Windows 7 操作系统。 Windows Server 2008 Windows Server 2008 下 AdvanTro-Pro 软件运行的系统平台是 Windows server 2008 R2 standard，在执行 AdvanTro-Pro 软件安装之前，应先按照《Windows Server 2008 装机规范》安装 Windows Server 2008 操作系统。
图 2-7 复制文件的界面
7)
复制文件完成后，进入“相关信息”的安装界面，在图 2-8 中键入相应的用户名称和装置名称。
5
AdvanTrol-Pro 软件安装规范
图 2-8 相关信息的填写界面
8)
点击“下一步（N）”，进入如图 2-9 的安装 WinPcap 界面。
图 2-9 WinPcap 安装界面
2)
点击“下一步（N）”，进入“许可证协议”的选择界面，如图 2-3 所示：
2
AdvanTrol-Pro 软件安装规范
图 2-3 许可证协议的选择界面
3)
点击“是（Y）”，进入“客户信息”安装界面，输入客户信息，如图 2-4 所示：
图 2-4 客户信息的填写界面
4)
点击“下一步（N）”，进入 AdvanTrol-Pro V2.70 的路径选择界面，如图 2-5 所示：
注意：提醒需要特别注意的信息。
ATTENTION: Identifies information that requires special consideration.
Hale Waihona Puke 提示：标记对用户的建议或提示。 TIP：Identifies advice or hints for the user.
目
录
AdvanTrol-Pro 软件安装规范.......................................................................................................................... 1 1 软件安装运行环境........................................................................................................................................1 2 软件安装........................................................................................................................................................ 1 3 资料版本说明................................................................................................................................................ 9
9)
在图 2-9 中，点击“Next>”，则进入如图 2-10 所示的安装补丁的界面。
6
AdvanTrol-Pro 软件安装规范
图 2-10 WinPcap 安装欢迎界面
10) 点击“Next>”，则进入如图 2-11 所示的 WinPcap 许可协议选择界面。
图 2-11 WinPcap 许可协议选择界面
AdvanTrol-Pro 软件安装规范
图 2-1 准备安装 AdvanTrol-Pro V2.70 的安装窗口
按照安装向导的提示，一步一步进行安装。 1) 进入“AdvanTrol-Pro V2.70 安装”的对话框，如图 2-2 所示：
图 2-2 AdvanTrol-Pro V2.70 安装界面的窗口
WARNING: Indicates information that a potentially hazardous situation which, if not avoided, could result in serious injury or death.
电击危险：标示有可能产生电击危险的信息。
图 2-13 WinPcap 4.1.1 安装完成界面 13) 点击“Finish”，进入如图 2-14 的补丁安装界面。
8
AdvanTrol-Pro 软件安装规范
图 2-14 选择是否安装补丁安装界面
14) 在图 2-14 中，点击“是”，并等待直到补丁安装完成。 15) 补丁安装完成后，出现如图 2-15 所示的界面，选择“是，立即重新启动计算机。”，并点击“完成”按钮，结束 AdvanTrol-Pro V2.70 软件的安装。
Risk of electrical shock: Indicates information that Potential shock hazard where HAZARDOUS LIVE voltages greater than 30V RMS, 42.4V peak, or 60V DC may be accessible.
图 2-15 软件安装完成的界面
3 资料版本说明
表 3-1 版本升级更改一览表资料版本号 AdvanTrol-Pro 软件安装规范（V1.0）适用产品型号 AdvanTrol-Pro 更改说明适用于 V2.70.00.00-C 版本的 AdvanTrol-Pro 软件。
9
11) 点击“I Agree”，进入如图 2-12 所示 WinPcap 安装选项的界面。
7
AdvanTrol-Pro 软件安装规范
图 2-12 WinPcap 安装选项 12) 选中“Automatically start the WinPcap driver at boot time”，并点击“Install”，开始安装 WinPcap 4.1.1，安装完成后，弹出如图 2－13 所示的 WinPcap 安装完成界面。
2 软件安装
以下的安装步骤适合 Windows 2000、Windows XP、Windows 7 和 Windows Server 2008，下面以 Windows 7 为例，系统软件的安装步骤如下：安装过程中，只需将软件的安装光盘插入光驱，自动运行安装程序，出现图 2-1 所示的安装界面。
1
3
AdvanTrol-Pro 软件安装规范
图 2-5 AdvanTrol-Pro V2.70 路径的选择界面
5)
在上图中选择安装的路径后，点击“下一步（N）”，进入“安装类型”的选择界面，如图 2-6 所示：
图 2-6 软件安装类型的选择界面
“安装类型”包含：操作站安装、工程师站安装、数据站安装和完全安装 4 个选项。安装