BETA工具车工具箱
MATLAB如何添加工具箱
关于如何在matlab中添加新的工具箱的整理和心得首先说说添加到matlab搜索路径好处：1 对 n——你只需要存储一个副本，就可以在其他地方使用。
具体来说，假设你在数据盘D上新建了两个目录abc和def，这两个工程（每个目录下的所有程序相应地称为一个工程）都需要调用同一个（些）函数（简称工具箱），这时候，如果你没有把该工具箱添加到matlab的搜索路径下，则需要分别把工具箱中所有用到的文件都复制到目录abc和def下才能正确运行。
这显然浪费空间，所以，matlab提供了一个搜索路径（默认在matlab安装目录下的toolbox中），只要把工具箱对应的整个文件夹复制到搜索路径对应的目录下，并且通知matlab一声（把该路径正确添加到搜索路径中），就可以在abc和def中使用这个工具箱了（即无论你的工程文件在哪个目录（有效的目录）下都可以访问这个工具箱中的函数）。
下面就以matlab安装目录下的toolbox目录作为默认的添加路径进行详细说明。
1. 如何添加工具箱？以下是添加工具箱的方法：（论坛很多人转载过，这里就不作区分了，下面的举例也一样）如果是Matlab安装光盘上的工具箱，重新执行安装程序，选中即可。
如果是单独下载的工具箱，则需要把新的工具箱（以下假设工具箱名字为svm）解压到toolbox目录下，然后用addpath或者pathtool把该工具箱的路径添加到matlab的搜索路径中，最后用which newtoolbox_command.m来检验是否可以访问。
如果能够显示新设置的路径，则表明该工具箱可以使用了。
具体请看工具箱自己代的README文件。
1.1 举例：要添加的工具箱为svm，则解压后，里边有一个目录svm，假设matlab安装在D:\MATLAB6p5，将svm目录拷贝至D:\MATLAB6p5\toolbox，然后运行matlab，在命令窗口输入addpath D:\MATLAB6p5\toolbox\svm回车，来添加路径。
迈腾工具包'metatools'用户指南说明书
Package‘metatools’March13,2023Type PackageTitle Enable the Use of'metacore'to Help Create and Check DatasetVersion0.1.5Description Uses the metadata information stored in'metacore'objects to check and build meta-data associated columns.License MIT+file LICENSEEncoding UTF-8RoxygenNote7.2.3Imports dplyr,metacore(>=0.0.4),purrr,rlang,stringr,tidyr,tibble,magrittrSuggests testthat(>=3.0.0),haven,covr,safetyData,admiral.testConfig/testthat/edition3URL https://pharmaverse.github.io/metatools/BugReports https:///pharmaverse/metatools/issuesNeedsCompilation noAuthor Christina Fillmore[aut,cre](<https:///0000-0003-0595-2302>), Mike Stackhouse[aut](<https:///0000-0001-6030-723X>),GlaxoSmithKline LLC[cph,fnd],F.Hoffmann-La Roche AG[cph,fnd],Atorus Research LLC[cph,fnd]Maintainer Christina Fillmore<****************************>Repository CRANDate/Publication2023-03-1310:00:05UTCR topics documented:add_labels (2)add_variables (3)build_from_derived (3)build_qnam (4)12add_labels check_ct_col (5)check_ct_data (6)check_variables (7)combine_supp (7)convert_var_to_fct (8)create_cat_var (9)create_subgrps (10)create_var_from_codelist (10)drop_unspec_vars (12)get_bad_ct (12)make_supp_qual (13)metatools_example (14)order_cols (14)remove_labels (15)set_variable_labels (15)sort_by_key (16)Index18 add_labels Apply labels to multiple variables on a data frameDescriptionThis function allows a user to apply several labels to a dataframe at once.Usageadd_labels(data,...)Argumentsdata A data.frame or tibbled parameters in the form of variable=’label’Valuedata with variable labels appliedExamplesadd_labels(mtcars,mpg="Miles Per Gallon",cyl="Cylinders")add_variables3 add_variables Add Missing VariablesDescriptionThis function adds in missing columns according to the type set in the metacore object.All values in the new columns will be missing,but typed correctly.If unable to recognize the type in the metacore object will return a logical type.Usageadd_variables(dataset,metacore,dataset_name=NULL)Argumentsdataset Dataset to add columns to.If all variables are present no columns will be added.metacore metacore object that only contains the specifications for the dataset of interest.dataset_name Optional string to specify the dataset.This is only needed if the metacore object provided hasn’t already been subsetted.ValueThe given dataset with any additional columns addedExampleslibrary(metacore)library(haven)library(dplyr)load(metacore_example("pilot_ADaM.rda"))spec<-metacore%>%select_dataset("ADSL")data<-read_xpt(metatools_example("adsl.xpt"))%>%select(-TRTSDT,-TRT01P,-TRT01PN)add_variables(data,spec)build_from_derived Build a dataset from derivedDescriptionThis function builds a dataset out of the columns that just need to be pulled through.So any variable that has a derivation in the format of’dataset.variable’will be pulled through to create the new dataset.When there are multiple datasets present,they will be joined by the shared‘key_seq‘variables.These columns are often called’Predecessors’in ADaM,but this is not universal so that is optional to specify.4build_qnamUsagebuild_from_derived(metacore,ds_list,dataset_name=NULL,predecessor_only=TRUE,keep=FALSE)Argumentsmetacore metacore object that contains the specifications for the dataset of interest.ds_list Named list of datasets that are needed to build the fromdataset_name Optional string to specify the dataset that is being built.This is only needed if the metacore object provided hasn’t already been subsetted.predecessor_onlyBy default‘FALSE‘,but if‘TRUE‘will only use derivations with the origin of’Predecessor’keep Boolean to determine if the original columns should be kept.By default‘FALSE‘, so only the ADaM columns are kept.If‘TRUE‘the resulting dataset will haveall the ADaM columns as well as any SDTM column that were renamed in theADaM(i.e‘ARM‘and‘TRT01P‘will be in the resulting dataset)ValuedatasetExampleslibrary(metacore)library(haven)library(magrittr)load(metacore_example("pilot_ADaM.rda"))spec<-metacore%>%select_dataset("ADSL")ds_list<-list(DM=read_xpt(metatools_example("dm.xpt")))build_from_derived(spec,ds_list,predecessor_only=FALSE)build_qnam Build the observations for a single QNAMDescriptionBuild the observations for a single QNAMUsagebuild_qnam(dataset,qnam,qlabel,idvar,qeval,qorig)check_ct_col5 Argumentsdataset Input datasetqnam QNAM valueqlabel QLABEL valueidvar IDV AR variable name(provided as a string)qeval QEV AL value to be populated for this QNAMqorig QORIG value to be populated for this QNAMValueObservations structured in SUPP formatcheck_ct_col Check Control Terminology for a Single ColumnDescriptionThis function checks the column in the dataset only contains the control terminology as defined by the metacore specificationUsagecheck_ct_col(data,metacore,var,na_acceptable=NULL)Argumentsdata Data to checkmetacore A metacore object to get the codelist from.If the variable has different codelists for different datasets the metacore object will need to be subsetted using‘se-lect_dataset‘from the metacore package.var Name of variable to checkna_acceptable Logical value,set to‘NULL‘by default,so the acceptability of missing values is based on if the core for the variable is"Required"in the‘metacore‘object.Ifset to‘TRUE‘then will pass check if values are in the control terminology orare missing.If set to‘FALSE‘then NA will not be acceptable.ValueGiven data if column only contains control terms.If not,will error given the values which should not be in the column6check_ct_dataExampleslibrary(metacore)library(haven)library(magrittr)load(metacore_example("pilot_ADaM.rda"))spec<-metacore%>%select_dataset("ADSL")data<-read_xpt(metatools_example("adsl.xpt"))check_ct_col(data,spec,TRT01PN)check_ct_col(data,spec,"TRT01PN")check_ct_data Check Control Terminology for a DatasetDescriptionThis function checks that all columns in the dataset only contains the control terminology as defined by the metacore specificationUsagecheck_ct_data(data,metacore,na_acceptable=NULL)Argumentsdata Dataset to checkmetacore metacore object that contains the specifications for the dataset of interest.If any variable has different codelists for different datasets the metacore object willneed to be subsetted using‘select_dataset‘from the metacore package.na_acceptable Logical value,set to‘NULL‘by default,so the acceptability of missing values is based on if the core for the variable is"Required"in the‘metacore‘object.Ifset to‘TRUE‘then will pass check if values are in the control terminology orare missing.If set to‘FALSE‘then NA will not be acceptable.ValueGiven data if all columns pass.It will error otherwiseExampleslibrary(haven)library(metacore)library(magrittr)load(metacore_example("pilot_ADaM.rda"))spec<-metacore%>%select_dataset("ADSL")data<-read_xpt(metatools_example("adsl.xpt"))check_ct_data(data,spec)check_variables7 check_variables Check Variable NamesDescriptionThis function checks the variables in the dataset against the variables defined in the metacore spec-ifications.If everything matches the function will return‘TRUE‘and a message starting everything is as expected.If there are additional or missing variables and error will explain the discrepancies Usagecheck_variables(data,metacore,dataset_name=NULL)Argumentsdata Dataset to checkmetacore metacore object that only contains the specifications for the dataset of interest.dataset_name Optional string to specify the dataset.This is only needed if the metacore object provided hasn’t already been subsetted.Valuemessage if the dataset matches the specification and the dataset,and error otherwiseExampleslibrary(haven)library(metacore)library(magrittr)load(metacore_example("pilot_ADaM.rda"))spec<-metacore%>%select_dataset("ADSL")data<-read_xpt(metatools_example("adsl.xpt"))check_variables(data,spec)combine_supp Combine the Domain and Supplemental QualifierDescriptionCombine the Domain and Supplemental QualifierUsagecombine_supp(dataset,supp)8convert_var_to_fct Argumentsdataset Domain datasetsupp Supplemental Qualifier datasetValuea dataset with the supp variables added to itExampleslibrary(safetyData)library(tibble)combine_supp(sdtm_ae,sdtm_suppae)%>%as_tibble()convert_var_to_fct Convert Variable to Factor with Levels Set by Control TermsDescriptionThis functions takes a dataset,a metacore object and a variable name.Then looks at the metacore object for the control terms for the given variable and uses that to convert the variable to a factor with those levels.If the control terminology is a code list,the code column will be used.The function fails if the control terminology is an external libraryUsageconvert_var_to_fct(data,metacore,var)Argumentsdata A dataset containing the variable to be modifiedmetacore A metacore object to get the codelist from.If the variable has different codelists for different datasets the metacore object will need to be subsetted using‘se-lect_dataset‘from the metacore packagevar Name of variable to changeValueDataset with variable changed to a factorcreate_cat_var9Exampleslibrary(metacore)library(haven)library(dplyr)load(metacore_example("pilot_ADaM.rda"))spec<-metacore%>%select_dataset("ADSL")dm<-read_xpt(metatools_example("dm.xpt"))%>%select(USUBJID,SEX,ARM)#Variable with codelist control termsconvert_var_to_fct(dm,spec,SEX)#Variable with permitted value control termsconvert_var_to_fct(dm,spec,ARM)create_cat_var Create Categorical Variable from CodelistDescriptionUsing the grouping from either the‘decode_var‘or‘code_var‘and a reference variable(‘ref_var‘) it will create a categorical variable and the numeric version of that categorical variable.Usagecreate_cat_var(data,metacore,ref_var,grp_var,num_grp_var=NULL)Argumentsdata Dataset with reference variable in itmetacore A metacore object to get the codelist from.If the variable has different codelists for different datasets the metacore object will need to be subsetted using‘se-lect_dataset‘from the metacore package.ref_var Name of variable to be used as the reference i.e AGE when creating AGEGR1 grp_var Name of the new grouped variablenum_grp_var Name of the new numeric decode for the grouped variable.This is optional if no value given no variable will be createdValuedataset with new column addedExampleslibrary(metacore)library(haven)library(dplyr)load(metacore_example("pilot_ADaM.rda"))spec<-metacore%>%select_dataset("ADSL")10create_var_from_codelist dm<-read_xpt(metatools_example("dm.xpt"))%>%select(USUBJID,AGE)#Grouping Column Onlycreate_cat_var(dm,spec,AGE,AGEGR1)#Grouping Column and Numeric Decodecreate_cat_var(dm,spec,AGE,AGEGR1,AGEGR1N)create_subgrps Create SubgroupsDescriptionCreate SubgroupsUsagecreate_subgrps(ref_vec,grp_defs)Argumentsref_vec Vector of numeric valuesgrp_defs Vector of strings with groupings defined.Format must be either:<00,>=00, 00-00,or00-<00ValueCharacter vector of the values in the subgroupsExamplescreate_subgrps(c(1:10),c("<2","2-5",">5"))create_subgrps(c(1:10),c("<=2",">2-5",">5"))create_subgrps(c(1:10),c("<2","2-<5",">=5"))create_var_from_codelistCreate Variable from CodelistDescriptionThis functions uses code/decode pairs from a metacore object to create new variables in the datacreate_var_from_codelist11 Usagecreate_var_from_codelist(data,metacore,input_var,out_var,decode_to_code=TRUE)Argumentsdata Dataset that contains the input variablemetacore A metacore object to get the codelist from.If the‘out_var‘has different codelists for different datasets the metacore object will need to be subsetted using‘se-lect_dataset‘from the metacore package.input_var Name of the variable that will be translated for the new columnout_var Name of the output variable.Note:the grouping will always be from the code of the codelist associates with‘out_var‘decode_to_code Direction of the translation.By default assumes the‘input_var‘is the decode column of the codelist.Set to‘FALSE‘if the‘input_var‘is the code column ofthe codelistValueDataset with a new column addedExampleslibrary(metacore)library(tibble)data<-tribble(~USUBJID,~VAR1,~VAR2,1,"M","Male",2,"F","Female",3,"F","Female",4,"U","Unknown",5,"M","Male",)spec<-spec_to_metacore(metacore_example("p21_mock.xlsx"),quiet=TRUE)create_var_from_codelist(data,spec,VAR2,SEX)create_var_from_codelist(data,spec,"VAR2","SEX")create_var_from_codelist(data,spec,VAR1,SEX,decode_to_code=FALSE)12get_bad_ct drop_unspec_vars Drop Unspecified VariablesDescriptionThis function drops all unspecified variables.It will throw and error if the dataset does not contain all expected variables.Usagedrop_unspec_vars(dataset,metacore,dataset_name=NULL)Argumentsdataset Dataset to changemetacore metacore object that only contains the specifications for the dataset of interest.dataset_name Optional string to specify the dataset.This is only needed if the metacore object provided hasn’t already been subsetted.ValueDataset with only specified columnsExampleslibrary(metacore)library(haven)library(dplyr)load(metacore_example("pilot_ADaM.rda"))spec<-metacore%>%select_dataset("ADSL")data<-read_xpt(metatools_example("adsl.xpt"))%>%select(USUBJID,SITEID)%>%mutate(foo="Hello")drop_unspec_vars(data,spec)get_bad_ct Gets vector of control terminology which should be thereDescriptionThis function checks the column in the dataset only contains the control terminology as defined by the metacore specification.It will return all values not found in the control terminologyUsageget_bad_ct(data,metacore,var,na_acceptable=NULL)make_supp_qual13Argumentsdata Data to checkmetacore A metacore object to get the codelist from.If the variable has different codelists for different datasets the metacore object will need to be subsetted using‘se-lect_dataset‘from the metacore package.var Name of variable to checkna_acceptable Logical value,set to‘NULL‘by default,so the acceptability of missing values is based on if the core for the variable is"Required"in the‘metacore‘object.Ifset to‘TRUE‘then will pass check if values are in the control terminology orare missing.If set to‘FALSE‘then NA will not be acceptable.eValuevectormake_supp_qual Make Supplemental QualifierDescriptionMake Supplemental QualifierUsagemake_supp_qual(dataset,metacore,dataset_name=NULL)Argumentsdataset dataset the supp will be pulled frommetacore A subsetted metacore object to get the supp information from.If not already subsetted then a‘dataset_name‘will need to be provideddataset_name optional name of datasetValuea CDISC formatted SUPP datasetExampleslibrary(metacore)library(safetyData)library(tibble)load(metacore_example("pilot_SDTM.rda"))spec<-metacore%>%select_dataset("AE")ae<-combine_supp(sdtm_ae,sdtm_suppae)make_supp_qual(ae,spec)%>%as_tibble()14order_cols metatools_example Get path to pkg exampleDescriptionpkg comes bundled with a number of samplefiles in its‘inst/extdata‘directory.This function make them easy to accessUsagemetatools_example(file=NULL)Argumentsfile Name offile.If‘NULL‘,the examplefiles will be listed.Examplesmetatools_example()metatools_example("dm.xpt")order_cols Sort Columns by OrderDescriptionThis function sorts the dataset according to the order found in the metacore object.Usageorder_cols(data,metacore,dataset_name=NULL)Argumentsdata Dataset to sortmetacore metacore object that contains the specifications for the dataset of interest.dataset_name Optional string to specify the dataset.This is only needed if the metacore object provided hasn’t already been subsetted.Valuedataset with ordered columnsremove_labels15Exampleslibrary(metacore)library(haven)library(magrittr)load(metacore_example("pilot_ADaM.rda"))spec<-metacore%>%select_dataset("ADSL")data<-read_xpt(metatools_example("adsl.xpt"))order_cols(data,spec)remove_labels Remove labels to multiple variables on a data frameDescriptionThis function allows a user to removes all labels to a dataframe at once.Usageremove_labels(data)Argumentsdata A data.frame or tibbleValuedata with variable labels appliedExampleslibrary(haven)data<-read_xpt(metatools_example("adsl.xpt"))remove_labels(data)set_variable_labels Apply labels to a data frame using a metacore objectDescriptionThis function leverages metadata available in a metacore object to apply labels to a data frame.Usageset_variable_labels(data,metacore,dataset_name=NULL)Argumentsdata A dataframe or tibble upon which labels will be appliedmetacore metacore object that contains the specifications for the dataset of interest.dataset_name Optional string to specify the dataset.This is only needed if the metacore object provided hasn’t already been subsetted.ValueDataframe with labels appliedExamplesmc<-metacore::spec_to_metacore(metacore::metacore_example("p21_mock.xlsx"),quiet=TRUE)dm<-haven::read_xpt(metatools_example("dm.xpt"))set_variable_labels(dm,mc,dataset_name="DM")sort_by_key Sort Rows by Key SequenceDescriptionThis function sorts the dataset according to the key sequence found in the metacore object.Usagesort_by_key(data,metacore,dataset_name=NULL)Argumentsdata Dataset to sortmetacore metacore object that contains the specifications for the dataset of interest.dataset_name Optional string to specify the dataset.This is only needed if the metacore object provided hasn’t already been subsetted.Valuedataset with ordered columnsExampleslibrary(metacore)library(haven)library(magrittr)load(metacore_example("pilot_ADaM.rda"))spec<-metacore%>%select_dataset("ADSL")data<-read_xpt(metatools_example("adsl.xpt")) sort_by_key(data,spec)Indexadd_labels,2add_variables,3build_from_derived,3build_qnam,4check_ct_col,5check_ct_data,6check_variables,7combine_supp,7convert_var_to_fct,8create_cat_var,9create_subgrps,10create_var_from_codelist,10drop_unspec_vars,12get_bad_ct,12make_supp_qual,13metatools_example,14order_cols,14remove_labels,15set_variable_labels,15sort_by_key,1618。
黑鹰自动车辆工具系列产品说明书
This is the safety alert symbol. It is used to alert you to potential personal injury hazards.Obey all safety messages that follow this symbol to avoid possible injury or death.ModelCapacity BH212812 Ton BH2208 20 Ton BH230830 TonAir Actuated Bottle JacksOperating Instructions & Parts ManualSFA Companies10939 N. Pomona Ave. Kansas City, MO 64153******************************SAFETY and GENERAL INFORMATIONSave these instructions. For your safety, read, understand, and follow the information provided with and on this jack before using. The owner and operator of this equipment shall have an understanding of this jack and safe operating procedures before attempting to use. The owner and operator shall be aware that use and repair of this product may require special skills and knowledge. Instructions and safety information shall be conveyed in the operator's native language before use of this jack is authorized. If any doubt exists as to the safe and proper use of this jack, remove from service immediately.Inspect before each use. Do not use if broken, bent, cracked or damaged parts are noted. Any jack that appears damaged in any way, or operates abnormally shall be removed from service immediately. If the jack has been or suspected to have been subjected to a shock load (a load dropped suddenly, unexpectedly upon it), immediately discontinue use until jack has been checked by a factory authorized service center (contact distributor or manufacturer for list of authorized service centers). It is recommended that an annual inspection be done by qualified personnel. Labels and Operator's Manuals are available from manufacturer.PRODUCT DESCRIPTIONBlackhawk Automotive Air Actuated Bottle Jacks are designed to lift, not support, rated capacity loads consisting of one end of a vehicle. Immediately after lifting, the load must be supported by a pair of appropriately rated jack ***************************************************************************************** air pressure is required to raise rated capacity load.Never use hydraulic jack as a stand alone device. After lifting, immediately support the lifted loadwith a pair of appropriately rated jack stands. Never place any portion of your body under a load when lifting or lowering the load.PREPARATIONBefore Use1. Verify that the product and application are compatible, if in doubt call Customer Support (816) 891-6390.2. Before using this product, read the operator's manual completely and familiarize yourself thoroughly with theproduct, its components and recognize the hazards associated with its use.3. Assemble handle, ensure spring clips align with slots.4. To familiarize yourself with basic operation, use the notched end of provided handle to engage and turn the releasevalve:a. Clockwise until firm resistance is felt to further turning. This is the ‘CLOSED’ release valve position used toraise the ram plunger.b. Counter-clockwise, but no more than 1 turn from the closed position. This is the ‘OPEN’ release valveposition used to lower the ram plunger.5. With ram fully retracted, locate and remove the oil filler plug/screw. Insert the handle into the handle sleeve, thenpump 6 to 8 strokes. Ensure the oil level is just below the oil filler hole. Reinstall the oil filler plug/screw.6. Pour a teaspoon of good quality, air tool lubricant into the air supply inlet of the lift control valve. Connect to airsupply and squeeze lift control valve for 3 seconds to evenly distribute lubricant.7. This product is equipped with the popular 1/4" NPT air coupler. When installing a different air coupler of yourchoice, ensure that thread tape or compound is used when servicing connections. To ensure dependable, trouble free operation an inline air dryer and oiler is recommended.8. Check that the pump operates smoothly and that the extension screw will thread up/down easily before puttinginto service. Replace worn or damaged parts and assemblies with Blackhawk Automotive authorized replacement parts only.Bleeding / Venting Trapped AirWith the release valve in the OPEN position (4b above) and with ram plunger fully lowered, locate and remove the oil filler plug/screw. Insert the handle into the handle sleeve; then pump 6 to 8 full strokes. This will help release any pressurized air which may be trapped within the reservoir. Oil level should be even with the bottom of the oil filler hole. Reinstall the oil filler plug/screw.Be sure all tools and personnel are clear before lowering load. Only attachments and/or adapters supplied by the manufacturer shall be used. Lift only on areas of the vehicle as specified by the vehicle manufacturer.OPERATIONRaising the Ram Plunger1. Assemble handle, ensure that spring clips align with slots.2. Place vehicle in the park, with emergency brake on and wheel securely chocked to prevent inadvertent vehicle movement.3. Locate and close release valve by turning handle clockwise until firm resistance is felt to further thread engagement.4. Verify lift point, center jack saddle under lift point.5. Squeeze the lift control valve or insert handle into handle sleeve and pump to contact lift point. To lift, continue pumping until load reaches desired height. DO NOT OPERATE BY AIR AND BY HAND PUMPING AT THE SAME TIME.6. Immediately transfer the lifted load to a pair of appropriately rated jack stands.Use only handle provided by jack manufacturer.The handle provided with this jack will safely engage the release valve and operate the handle sleeve. If handle is worn, operates abnormally, or will not positively engage the release valve, STOP , discontinue use of the jack until a factory replacement handle can be acquired.Make certain that all personnel are clear of Control the rate of descent of the load at all times . The more you open the release valve, the faster the load descends.1. Raise load high enough to clear the jack stands, then carefully remove jack stands (always used in pairs).2. Slowly turn the handle counter-clockwise, but no more than 1 turn. If the load fails to lower:a. Use another jack to raise the vehicle high enough to reinstall jack stands.b. Remove the affected jack and then the stands.c. Lower the load by turning the release valve counter-clockwise, but no more than 1 turn.3. After removing jack from under the load, push ram and handle sleeve down to reduce exposure to rust and contamination.MAINTENANCEImportant : Use only good grade hydraulic jack oil. Avoid mixing different types of fluid and NEVER use brake fluid, turbine oil, transmission fluid, motor oil or glycerin. Improper fluid can cause premature failure of the jack and the potential for sudden and immediate loss of load. We recommend Mobil DTE 13M or equivalent.Adding oil1. With ram plunger fully lowered and pump piston fully depressed, set jack in its upright, level position. Remove oil filler screw.2. Fill with oil until just below the rim of the oil filler screw hole. Reinstall the oil filler plug/screw. Changing oilFor best performance and longest life, replace the complete fluid supply at least once per year.1. With ram plunger fully lowered and pump piston fully depressed, remove the oil filler plug/screw.2. Lay the jack on its side and drain the fluid into a suitable container.Note: Dispose of hydraulic oil in accordance with local regulations.3. Fill with oil until just below the rim of the oil filler hole. Reinstall the oil filler plug/screw.Lubrication1. A periodic coating of light lubricating oil to pivot points will help to prevent rust and assure that pump assemblies move freely.2. Air pump should be internally lubricated before each use. Use good quality air tool lubricant. If no inline oiler is used, pour a teaspoon of air tool oil into the air control valve inlet. Operate the jack with air pressure to fully distribute the oil inside the air motor.CleaningPeriodically check the pump piston and ram for signs of rust/corrosion. Clean as needed and wipe with oily cloth.Note: Never use sandpaper or abrasive material on these surfaces!StorageWhen not in use, store the jack with pump piston and ram plunger fully retracted and air supply disconnected.TROUBLESHOOTINGSymptomPossible CausesCorrective ActionJack will not lift load• Release valve not tightly closed • Overload condition• Air pressure inadequate • Ensure release valve tightly closed • Remedy overload condition • Ensure adequate air pressure Jack will lift, but not maintain pressure• Release valve not tightly closed • Overload condition• Hydraulic unit malfunction • Ensure release valve tightly closed • Remedy overload condition• Contact Blackhawk Tech. Service Jack will not lower after unloading• Reservoir overfilled • Ensure load is removed, then drain fluid to proper levelPoor lift performance• Fluid level low• Air trapped in system• Ensure proper fluid level• With ram fully retracted, remove oil filler plug/screw to let pressurized air escape, then reinstall oil filler plug/screwWill not lift to full extension • Fluid level low• Ensure proper fluid levelSFA Companies10939 N. Pomona Ave. Kansas City, MO 64153816-891-6390******************************ONE YEAR LIMITED WARRANTYFor a period of one (1) year from date of purchase, SFA Companies will repair or replace, at its option, without charge, any of its products which fails due to a defect in material or workmanship under normal usage. This limited warranty is a consumer's exclusive remedy.Performance of any obligation under this warranty may be obtained by returning the warranted product, freight prepaid, to SFA Companies Warranty Service Department, 10939 N. Pomona Ave., Kansas City, MO 64153. Except where such limitations and exclusions are specifically prohibited by applicable law, (1) THE CONSUMER'S SOLE AND EXCLUSIVE REMEDY SHALL BE THE REPAIR OR REPLACEMENT OF DEFECTIVE PRODUCTS AS DESCRIBED ABOVE. (2) SFA Companies SHALL NOT BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGE OR LOSS WHATSOEVER. (3) ANY IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED TO ONE YEAR, OTHERWISE THE REPAIR, REPLACEMENT OR REFUND AS PROVIDED UNDER THIS EXPRESS LIMITED WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER, AND IS PROVIDED IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED. (4) ANY MODIFICATION, ALTERATION, ABUSE, UNAUTHORIZED SERVICE OR ORNAMENTAL DESIGN VOIDS THIS WARRANTY AND IS NOT COVERED BY THIS WARRANTY .Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state.REPLACEMENT PARTS(refer to page 6 thru 8)Not all components of the jack are replacement items, but are illustrated as a convenient reference of location and position in the assembly sequence. When ordering parts, give Model number, serial number and parts description. Call or write for current pricing: SFA Companies, 10939 N. Pomona Ave. Kansas City, MO 64153, U.S.A. Tel:(816)891-6390Fax:(816)891-6599E-Mail:******************************Replacement Parts Illustration for Model BH2128 & BH2208Figure 3 - Model BH2128 & BH2208 Replacement Parts IllustrationItem DescriptionQty.3a Filler Plug (for BH2128 only)15Seal1a Dust Wiper 1b O-ring 1c O-ring1d Ram Bearing 1eBack-up Ring1Replacement Parts List for Models BH2128 & BH2208Item Description Qty.f U-cup 1g O-ring 2h Packing 1i Oil Seal 1j O-ring1k Ram Bearing (for BH2208)1lO-ring (for BH2208)1(*) Seal Kit Contents:Item Part# for BH2128Part# for BH2208Description Qty.1A120-10004-000A190-10002-000Cylinder Fastener 12A120-10003-000A190-10001-000Guide Ring 13a 5905-00100-200N/AFiller Plug 13b N/AG62S-03301-000Filler Screw 14A120-10002-000Special Washer 255905-00054-000Seal16BT10-24001-000Release Valve 175308-00095-000Gasket 28A27010-0001Air Motor 19A27010-0002Air Inlet Swivel 110A20060-0005Hose Assy.111A20060-0006Air Hose 112A20060-0007Lift Control Valve 113B020-15002-000Washer 114B080-15001-000Pump Cylinder 115A120-15101-000Pump Piston 1165115-08033-000Bolt 1175405-07024-000Pin118A120-13000-000Handle Socket 1195405-02018-000Snap Pin 120B10N-21000-000Handle Assembly121A27010-0011Air Coupler, Female 1/4 NPT 122A20060-0016Air Coupler, Male 1/4 NPT 123A27010-0008Piston, Air Motor 1245206-00008-001Nut1*A1206S-046A1906S-047Seal Kit (includes #4a, 6 & a~l)--A27010-0000Seal Kit, Air Motor --BH2128-L0BH2208-L0Label 1-BH2128-M1Manual1Figure 4 - Model BH2308 Replacement Parts IllustrationItem Part# for BH2308Description Qty.1B300-10003-000Saddle 125308-00380-000Spring 13B300-15000-000Reservoir 14G62S-03301-000Filler Screw 15B120-10003-000Filter 265905-00054-000Seal17BT02-17100-000Release Valve 18G100-44000-000Hyd. Cartridge 19A27010-0001Air Motor110A27010-0002Air Inlet Swivel 111A20060-0005Hose Assy.112A20060-0006Air Hose113A20060-0007Lift Control Valve 114B300-14002-000Washer115B300-14001-000Pump Cylinder 116B300-14101-000Pump Piston 117G150-04500-000Hyd. Cartridge 1185405-08030-000Pin219B300-13000-000Handle Socket 1205405-02018-000Snap Pin221B300-17000-000Handle Assembly 122A27010-0011Air Coupler, Female 123A20060-0016Air Coupler, Male 124A270-01100-0000Piston, Air Motor 1*B3000S-034Seal Kit--A27010-0000Seal Kit, Air Motor --BH2308-L0Label 1-BH2128-M1Manual1Replacement Parts Illustration and Parts List for Model BH2308Item Description Qty.2Spring 16Seal 1a O-ring 1b O-ring 1c Packing1d Back-up Ring 1e U-cup1f Back-up Ring 1g O-ring 1h Seal 1i U-cup1j Back-up Ring 1k Back-up Ring 1lO-ring1(*) Seal Kit Contents:1a23456789101113121415161718192021bcd ef gh l k ij242223。
从意大利到中国,解读近百年工具品牌“Beta(百塔)”的生存之道
一个浪漫与激情相随，古典与时尚同在的国度。
印象中的意大利总是充满着浓郁的人文风情，如同身着一身繁复的礼服，缀满着高贵紫百合的花样，莞尔间散发着一股浓郁的欧洲贵族气息，悄然转身便早已倾倒世人。
95年前，Beta （百塔）品牌诞生于此，并且迅速发展，成为当地知名企业之一。
如今，Beta （百塔）品牌已经逐渐成为全球工具制造领域的领军企业，不仅在意大利建立了三家工厂，而且还将Beta （百塔）产品远销海外，分别在法国、英国、荷兰、西班牙、中国等地建立了海外分公司。
至此，Beta （百塔）品牌也仿佛徘徊在浅滩中的独木舟突然变成了乘风破浪的快艇，那么，说到底，Beta （百塔）品牌究竟为何能够在跌宕起伏的市场竞争中保持业绩的稳健呢？又是哪些因素支撑其历经近百年沧桑、屹立不倒，始终散发着锐意进取的昂扬斗志？持续发展与创新兼具华丽典雅与时尚气质的意大利，传承着人们千年的浪漫情怀与独到的细腻思维，更孕育出了极具艺术气质的文化底蕴与奢美的设计理念。
1923年，Alessandro Ciceri (亚历山德罗-奇切里)正是在这里建立了生产钢铁踌造产品的Beta Utensili 公司，并于1939年成功注册商标，致力于专业工具的研发与制造。
1960年Beta （百塔）品牌产品开始涉及出口业务，并成为当时业内迅速崛起的专业工具制造商。
也就是在那个阶段，Beta （百塔）品牌发明了标志性的橙色金从意大利到中国，解读近百年工具品牌“Beta（百塔）”的生存之道文| 赵圆圆品牌天地Brand World078 / 工具信息与标准 Apr.2018属板工具车。
至此，橙色便俨然成为了Beta （百塔）品牌在业界独树一帜的风格与品牌的标志。
70年代，本着测试与开发产品的目的，Beta （百塔）品牌赞助了F1赛事中Ferrari 、Jordan 、McLaren 和Mainardi ，同时与MotoGP 等知名赛事进行了专业合作，而彼时的“橙色动力”更是在不知不觉中成为了赛车手们实现梦想的幸运色。
scum电工工具箱代码
scum电工工具箱代码
Scrum电工工具箱是Scrum的完整开发解决方案，它提供了一个面向前端开发的优秀环境，并简化了整个实施过程。
Scrum电工工具箱可以帮助开发人员设计复杂的系统，并可以高
效地进行实施，从而提高应用系统的效率。
Scrum电工工具箱拥有强大的管理功能，它能够在整个项目的计划，实施，监控和测试等
阶段提供一致的管理方法。
此外，Scrum电工工具箱还包括了多项工具，如Scrum Activities，Team Statistics，Coaches，Observers，Product Owners和Scrum Masters等，它
们可以帮助用户管理整个项目的每个环节。
此外，Scrum电工工具箱还提供了全面的文档，指南和技术支持，帮助用户轻松地搭建和管理工作环境。
Scrum电工工具箱提供了一种完整的项目实施环境，可以帮助用户实施复杂的软件系统。
它相对于其他开发工具来说，生产力提升更为有效，因为它提供了一整套的工具和服务，可以全面支持用户在项目实施过程中的每个环节，从而确保项目能够及时完成。
从而，Scrum电工工具箱可以为用户带来真正意义上的经济效益。
米勒坑工具M12 FUEL 斧头剪刀说明书
(1)
84 42-54-0210 Oil Pump Assembly
(1)
85 16-01-1015 Rotor Assembly
(1)
86 23-16-0043 Motor Insulator Kit
(1)
87 42-42-2010 Lock-Off Button kit
(1)
88 14-20-1003 Electronics Assembly
55 43-54-0102 Knuckle Guard
(1)
FIG. PART NO. DESCRIPTION OF PART
NO. REQ.
56 --------------- Handle Cover - Left
(1)
57 --------------- Handle Support - Right
22 49-16-2733 6" Guide Bar (Accessory)
(1)
23 44-52-0018 Sealing Pad
(1)
24 05-55-5001 M8 Flange Nut
(1)
25 --------------- Chain Cover
(1)
26 42-70-5268 E-Ring
Stator Assembly is contained inside Motor Insulator Rotor Assembly is contained inside Stator Control Board Lock-Off Shuttle On-Off Switch Battery Terminal Block
(1)
27 45-88-7001 Chain Washer
意大利BETA工具箱好不好
我们发现一些维修人员在工作的时候都会带上一个箱子，我们将这个箱子称之为工具箱，里面装的就是一些维修时需要用到的工具，那么，对于工具箱这个产品大家的了解有多少呢？为了大家能够更好的了解意大利BETA工具箱，下面我们来给大家介绍意大利下BETA工具箱的产品特点及应用范围。
工作台面采用独特的注塑成型，强度更高，光洁的表面处理更容易拭擦油污，把手采用软胶整体注塑加工，更加符合人机工程--注塑面板可承受台虎钳作业。
BETA工具箱抽屉内可以存放丰富的工具模块。
抽屉两侧采用叠加式滚珠滑轨，具有顺畅度并且提高了使用寿命。
加长的伸展距离使抽屉能够完全都打开，方便抽取抽屉里面的物体。
每个抽屉拥有自锁功能。
BETA工具箱两侧采用网孔板内加钢板的双层钢板设计，使箱体更加坚固，持久耐用。
网孔板用于悬挂工具或者附件，扩展使用功能。
锁采用环形锁匙结构，可延长锁的使用寿命。
为了避免丢失锁匙后无法打开抽屉，每个锁都配有对应的编号，只要提供编号，就可以重新配置钥匙。
BETA工具箱四角都配有新型复合材料制成的防撞条。
体型适中，可存放在汽车后备箱中，方便快捷。
工作人员的随身工具箱，采耳师的不锈钢工具箱，修理员的修理工具箱，医生的医药箱等等。
汽车4S店，在4S店建站的时候，都会配备一定数量的工具箱，以方便工具的使用，同时能与其档次相称，大型工厂：大型工厂多是流水线作业，使用小的工具箱快捷方便；客车和飞机制造企业：大型的客车和飞机制造企业，对工具车间的环境要求比较高，同时工位也比较的大，就必然要求配备一定的工具箱。
其他各个领域，都有涉及的可能。
茂肯机电设备致力于企业的产品推广销售，为企业提供服务。
公司始终以“诚信、创新、共赢”的经营理念，依托优良的产品品质和产品价格竞争力，为客户提供很好的售前、售后服务，提供轴承、导轨滑块、电机电器、电线电缆、阀门水泵、仪器仪表等机电设备产品一站式自动化解决方案。
意大利BETA工具箱更多详情，欢迎致电咨询我们~或者登录官网：。
Swagelok 工具箱说明书
Guía de Bolsillo Identifica los números de parte más adecuados para los trabajos a realizar
Llaves Ratchet Ideales para ajustar los racores en donde el espacio de trabajo es limitado.
MS-IG-1210
GALGA MEDICION 3/4" Y 18MM
MS-IG-1610
GALGA MEDICION 1/4", 3/8", 1/2"
MS-RW-400
LLAVE RACHET PARA RACOR 1/4"OD
MS-RW-600
LLAVE RACHET PARA RACOR 3/8"OD
Desbarbador Elimina las rebabas, reduciendo las posibilidades de fugas y daños a los componentes aguas abajo.
Cortador de tubo Corta tubos desde 3/16 a 1” de diámetro externo
Swagelok Tool Box
Caja de Copolimereo “Heavy Duty” Resistente a golpes Resistente al agua Ruedas y asa de transporte Dimensiones: 35x78x61cm
Ten a la mano las herramientas esenciales para el montaje de líneas de tubing y accesorios Swagelok®
沃拉手动工具检查器1说明书
EAN:4013288165343Size:218x81x51 mmPart number:05200995001Weight:478 gArticle number:Tool-Check Automotive 1Country of origin:CZ82079030Customs tariffnumber:1/4" bit ratchet, tough-absorbing bits, Rapidaptor holder, adaptor and 1/4" socketsIdeal for working in confined spacesTough viscous bits for universal useUse of 1/4" sockets also possible with the Wera adaptor 870/1Take it easy tool finder: colour coding according to profile and sizeRatchet, bits and sockets in a minimum of space – as compact as it gets. Comes with a practical clip for attachment e.g. to the belt so the Tool-Check is always at hand even for mobile applications. Simple operation, even with just one hand, in confined working spaces. Drop-forged, full-steel design and fine-pitched mechanism with 60 teeth that allows a small return angle of 6° for precise working. Easy left/right switchover. Ergonomically designed ratchet head and lever. Suitable for 1/4" bit and socket take-up. The use of 1/4" sockets is also possible with the Wera adaptor 870/1. Tough viscous bits for universal use. Manual and power tool socket insert (ISO 2725-Part 3) by Wera allows applications both in manual as well as power tools. "Take it easy" Tool Finder with colour coding according to size - for simple and rapid accessing of the required tool. Featuring a good grip to allow easy pick-up even with oily hands. Ball stop groove, for hex head bolts and nuts; chrome vanadium steel, matt chrome-plated.Web linkhttp://products.wera.de/en/zyklop_ratchets_and_accessories_zyklop_mini_tool-check_automotive_1.htmlSet contents:8001 A***********1 x 1/4" x 87 mm870/1***********1) 1 x 1/4" x 25 mm1) With friction ball; formanual nut spinner sockets889/4/1 K***********1 x 1/4" x 50 mm851/1 TZ PH*********** 1 x PH 1 x 25 mm*********** 1 x PH 2 x 25 mm***********1 x PH 3 x 25 mm867/1 TZ TORX®*********** 1 x TX 10 x 25 mm*********** 1 x TX 15 x 25 mm*********** 1 x TX 20 x 25 mm*********** 1 x TX 25 x 25 mm*********** 1 x TX 30 x 25 mm***********1 x TX 40 x 25 mm867/1 Z TORX® BO*********** 1 x TX 10 x 25 mm*********** 1 x TX 15 x 25 mm*********** 1 x TX 20 x 25 mm*********** 1 x TX 25 x 25 mm***********1 x TX 30 x 25 mm800/1 TZ***********1 x 1 x 5,5 x 25 mm840/1 Z Hex-Plus*********** 1 x 3 x 25 mm*********** 1 x 4 x 25 mm*********** 1 x 5 x 25 mm*********** 1 x 6 x 25 mm***********1 x 8 x 25 mm860/1 XZN Vielzahn*********** 1 x M 4 x 25 mm*********** 1 x M 5 x 25 mm*********** 1 x M 6 x 25 mm***********1 x M 8 x 25 mm873/1 Five Lobe*********** 1 x 20 x 25 mm*********** 1 x 25 x 25 mm*********** 1 x 27 x 25 mm***********1 x 30 x 25 mm8790 HMA*********** 1 x 5,5 x 23 mm*********** 1 x 6 x 23 mm*********** 1 x 7 x 23 mm*********** 1 x 8 x 23 mm*********** 1 x 10 x 23 mm*********** 1 x 12 x 23 mm*********** 1 x 13 x 23 mmWeb linkhttp://products.wera.de/en/zyklop_ratchets_and_accessories_zyklop_mini_tool-check_automotive_1.htmlThe Zyklop Mini RatchetsSmall return angleSimple direction changeZyklop MiniFor all difficult-to-accessapplications.The fine tooth mechanism,with its 60teeth,allows a small return angle of only 6°–ideal for precision work.Simple switching between left/right operations.Is rapid screwdriving possible with the Zyklop Mini?Zyklop Mini tool sets Slim designTake it easy tool finder systemHigh working speeds can be attained with the Zyklop Mini 1.The thumb wheel is important,enabling more rapid screwdriving,and the Zyklop Mini hande only needs to be used for the final tightening of the screw.Available in a set with the dependable Wera Bit-Check with socket adaptor and belt clip.Simple fitting and removal of tools.Very robust and a long service life.Its slim design makes it ideal for all particularly confined working situations.Take it easy tool finder system -with profile and size colour-coding for quick and easy tool selection.Colour-coded system for hexagon drive screws (L-Keys,Zyklop bit sockets),external hex drive screws and nuts (Joker wrenches,Zyklop sockets and Zyklop bit sockets with holding function),and TORX®drive screws (L-Keys,Zyklop bit sockets).Web linkhttp://products.wera.de/en/zyklop_ratchets_and_accessories_zyklop_mini_tool-check_automotive_1.html。
ArcPy帮助文档
ArcPy帮助文档1.什么是ArcPy (5)2.ArcPy 基本词汇 (6)3.ArcPy 快速浏览 (6)4.ArcPy 函数列表（按字母顺序） (9)AcceptConnections (14)AddDataStoreItem (15)AddError (18)AddFieldDelimiters (19)AddIDMessage (19)AddMessage (21)AddReturnMessage (21)AddToolbox (22)AddWarning (24)AlterAliasName (25)AsShape (25)CheckExtension (28)CheckOutExtension (30)CheckProduct (31)ClearEnvironment (32)Command (33)CopyParameter (34)CreateObject (34)CreateGeocodeSDDraft (36)CreateGPSDDraft (40)CreateImageSDDraft (46)CreateRandomValueGenerator (49)CreateScratchName (50)CreateUniqueName (52)DecryptPYT (53)Describe (53)DisconnectUser (56)EncryptPYT (58)Exists (58)FromWKB (59)FromWKT (60)GetActivePortalURL (60)GetArgumentCount (61)GetIDMessage (62)GetInstallInfo (63)GetLogHistory (64)GetMaxSeverity (65)GetMessage (66)GetMessageCount (67)GetMessages (67)GetPackageInfo (68)GetParameter (69)GetParameterAsText (70)GetParameterCount (71)GetParameterInfo (71)GetParameterValue (73)GetReturnCode (73)GetSeverity (74)GetSeverityLevel (75)GetSigninToken (75)GetSystemEnvironment (76)GetUTMFromLocation (77)ImportToolbox (77)InsertCursor (78)IsSynchronous (79)ListDatasets (80)ListDataStoreItems (82)ListEnvironments (83)ListFeatureClasses (84)ListFields (86)ListIndexes (87)ListInstallations (88)ListPortalURLs (89)ListPrinterNames (89)ListRasters (90)ListSpatialReferences (91)ListTables (92)ListToolboxes (93)ListTools (94)ListTransformations (95)ListUsers (96)ListVersions (97)ListWorkspaces (98)LoadSettings (99)NumPyArrayToRaster (100)ParseFieldName (104)ParseTableName (105)RefreshActiveView (110)RefreshCatalog (111)RefreshTOC (111)RemoveDataStoreItem (112)RemoveToolbox (113)ResetEnvironments (113)ResetProgressor (114)SaveSettings (115)SearchCursor (116)SetLogHistory (117)SetParameter (118)SetParameterAsText (118)SetProduct (120)SetProgressor (121)SetProgressorLabel (122)SetProgressorPosition (123)SetSeverityLevel (124)TestSchemaLock (125)UpdateCursor (126)Usage (128)ValidateDataStoreItem (128)ValidateFieldName (129)ValidateTableName (131)5.ArcPy数据访问模块 (132)Domain (133)Editor (134)InsertCursor (138)Replica (140)SearchCursor (141)UpdateCursor (145)Version (149)ExtendTable (150)FeatureClassToNumPyArray (151)ListDomains (155)ListFieldConflictFilters (156)ListReplicas (156)ListSubtypes (157)ListVersions (158)NumPyArrayToFeatureClass (159)NumPyArrayToTable (160)TableToNumPyArray (162)Walk (164)6.arcpy.mapping模块 (167)<1>.按字母顺序排序的arcpy.mapping类列表 (167)DataDrivenPages (167)DataFrameTime (174)DataFrame (177)GraduatedColorsSymbology (180)GraduatedSymbolsSymbology (183)GraphicElement (186)LabelClass (192)Layer (193)LayerTime (207)LegendElement (211)MapDocument (216)MapsurroundElement (224)PDFDocument (225)PictureElement (232)RasterClassifiedSymbology (233)StyleItem (237)TableView (238)TextElement (242)UniqueValuesSymbology (245)<2>.按功能分类的arcpy.mapping函数列表 (247)一.导出、打印地图: (247)ExportReport (247)ExportToAI (252)ExportToBMP (254)ExportToEMF (256)ExportToEPS (258)ExportToGIF (261)ExportToJPEG (264)ExportToPDF (266)ExportToPNG (269)ExportToSVG (272)ExportToTIFF (274)ListPrinterNames (276)PrintMap (277)二. 管理文档和图层 (278)AddLayer (278)AddLayerToGroup (280)AddTableView (281)AnalyzeForMSD (282)AnalyzeForSD (282)ConvertToMSD (284)ConvertWebMapToMapDocument (285)CreateGISServerConnectionFile (296)CreateMapSDDraft (299)DeleteMapService (311)InsertLayer (313)Layer (315)ListBookmarks (315)ListBrokenDataSources (317)ListDataFrames (318)ListLayers (319)ListLayoutElements (321)ListMapServices (322)ListStyleItems (325)ListTableViews (326)MapDocument (327)MoveLayer (329)PDFDocumentCreate (330)PDFDocumentOpen (331)PublishMSDToServer (331)RemoveLayer (333)RemoveTableView (334)TableView (334)UpdateLayer (335)UpdateLayerTime (336)<3>.按字母顺序排序的arcpy.mapping 常量列表 (338)<4>.使用arcpy.mapping 更新和修复数据源 (344)work Analyst 模块 (350)8.Spatial Analyst 模块 (354)9.Time模块 (355)1.什么是ArcPyArcPy 是一个以成功的arcgisscripting 模块为基础并继承了arcgisscripting 功能进而构建而成的站点包。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
精密量仪 测量工具 传感器 游标卡尺 BETA 工具车工具箱
BETA 工具车工具箱，顾名思义，就是一种容器，是存储工具器械的容器。
BETA 工具车工具箱可以分成移动型和固定型两种。
移动型的工具箱也就是这种工具车。
BETA 工具车工具箱使用广泛，不仅在电讯、汽车、维修等行业作用大，而且还是用于家庭、钓鱼等日常生活之中。
工具车工具箱到底什么牌子的好呢？工具车工具箱哪里有卖的呢？下面小编就来简单介绍BETA 工具车工具箱一些信息。
二、工具箱分类
1、塑料工具箱
采用好的工程塑料，高强度耐冲击，一般用于存储五金工具。
2
、虚拟工具箱
一些功能的集合，将各种工具集合到一个模块当中，方便使用和管理维护。
如：游戏工具箱、查询工具箱等。
3、铝合金工具箱
是一种铝合金，以镁和硅作为合金元素。
总体而言具有好的机械性质，可以进行热处理及焊接。
常被使用的铝合金。
铝合金工具箱是由铝合金材料为骨架，ABS 、密度板（中纤板）、夹板（多层板）等为面板，以三通、口条、手把、锁等为配件组合而成的箱体。
4、汽车工具箱
汽车工具箱是指在发生故障或者意外的情况下，辅助完成车主处理这些问题的工具。
一般包括了应急小锤、急救包、大容量灭火器、可折叠反光警示标志、车载逆变器、搭电过火线、车用保险丝、打气泵、对讲机、防水胶带、绝缘胶带、免拆补胎工具、拖车绳等等。
5、实体工具箱
工具的集合，用以存放各种具有不同功能和作用的工具的箱子。
如：医疗工具箱、修理工具箱等。
6、铁皮工具箱
分为手提式，两抽式和翻斗式工具箱。
采用镀锌磷化钢板，结实耐用。
上盖带有抽屉锁止功能，顶部提手携带方便。
工具使用一般要求
1.使用工具人员，要熟知工具的性能、特点、使用、保管和维修及保养方法。
2.各种施工工具要是正式厂家生产的合格产品。
精密量仪测量工具传感器游标卡尺
3.工作前要对工具进行检查，严禁使用腐蚀、变形、松动、有故障、破损等不合格工具。
4.停止工作时，禁止把机件、工具放在机器或设备上。
5.带有牙口、刃口尖锐的工具及转动部分应有防护装置。
6.使用特殊工具时(如喷灯、冲头等)，应有相应保护措施。
7.小型工器具放在工具袋中妥善保管。
茂肯机电设备致力于企业的产品推广销售，为企业提供服务。
公司始终以“诚信、创新、共赢”的经营理念，依托优良的产品品质和产品价格竞争力，为客户提供很好的售前、售后服务，提供轴承、导轨滑块、电机电器、电线电缆、阀门水泵、仪器仪表等机电设备产品一站式自动化解决方案。
南京茂肯机电设备有限公司是BETA 的长期合作伙伴
详情欢迎致电咨询我们~或者登录官网：
工具车、工具箱——给您的工具一个家！
精密量仪测量工具传感器游标卡尺。