台湾winner插装阀
Vickers 带位置反馈的三通插装阀 说明书
Vickers™带位置反馈的三通插装阀11-05-0002C1000带位置反馈的三通插装阀目录页码概述和功能符号 3用于流量控制型的系统元件 4用于 p/Q型的系统元件 4型号编法:CVU-**-EPQ插装阀和 KBSD G4V-3...EN83 先导阀 5 CVU-**-EPQ插装阀：工作数据 6性能数据：压力增益和流量增益 7频率响应 8安装尺寸 9腔孔加工细节用于 CVU-32-EPQ110 和11腔孔加工细节用于 CVU-50-EPQ212 和13 KBSDG4V-3...EN83 先导阀:安装尺寸 14内置放大器： 方框图 15内置放大器： 接线 16应用数据 17本样本介绍型号 CVU - -EPQ 的三油口插装阀，它们在两类系统中作为基本功能元件：1. 流量控制和2. p /Q ，压力和流量控制。
液控的 CVU -**-EPQ 阀，必须由一个单独的比例电磁铁控制的先导阀控制。
这种推荐的先导阀包括在样本中。
规格 3 先导阀带有内置放大器，阀的型号是 KBSDG4V-3，允许与用户的控制三通功能通过闭式过渡特性提供在工作油口 “A” 和进油口 “P” 或出油口 “T”之间（根据阀芯位置）完全可控的节流作用。
在正常工况（即无液压先导压力）阀芯在弹簧作用下给出流道 “A ” 至 “T” ，这可用来作为 “故障保险” 工况。
这些阀供开环和闭环控制系统使用，这里给出的性能数据是当这些阀用于这类系统并采用合适的威格士先导阀和电控器时才具有的。
闭环压力控制主阀芯的零正遮盖工况使 EPQ 阀用于压力控制模式，通过检测压力传感器出油口 “A ” 处的压力使控制回路闭环。
单/双先导控制型式 EPQ 1来自远程先导阀 “A” 口的控制压力是通过安装接口中的 “X” 口，作用在阀芯顶部的整个面积上，阀芯位置则是由输入（指令）信号和 LVD T 位置反馈信号之间的关系来确定。
型式 EPQ 2先导压力除了通过油口 “X”, 还由先导阀的 “B” 口通过三通插装阀中的第二个先导控制口 “B” 连接到阀芯的环状面积，这样阀芯在两个方向的移动都受到先导压力的控制。
阀岛 CPV10-EX-VI 紧凑型压力阀说明书
阀岛CPV10-EX-VI,紧凑性Subject to change –2019/112 Internet:/catalogue/...主要特性创新功能多样可靠性佳易于安装•立方体结构，性能出色，重量轻•坚固耐用•优化用于控制柜内安装•适用于过程阀的先导控制•流量大，结构十分紧凑•得益于每个阀片可有两个阀功能，每个阀岛最多可配备16片两位两通或两位三通阀•灵活而经济地连接2…8片阀•极佳的灵活性得益于:–多种气动功能（阀派生型）–不同的压力范围•隔离板，用于创建压力分区•盲板，用于未来扩展•阀有手控装置•安装在控制柜内时防护等级可达IP65•本安型阀岛，符合ATEX 类别2(区域1)•金属阀结构，十分坚固•使用寿命长•即可安装、已经过测试的单元•降低选型、订货、安装和调试成本•牢固地安装在墙面或H 型导轨上•复合接头板–快速替换阀模块，无需替换现有气管接口•阀装配为控制柜内安装而优化主要特性主要特性标签坚固的金属螺纹或预装配快插接头QS 丰富的阀功能、压力分区创建、盲板电接口简单:–单独接口快速安装:–用螺丝直接安装–安装在H型导轨上–通过复合接头板可靠操作:手控装置，按钮式、锁定式或封盖式阀宽–10mm配备选项阀功能•两位五通阀,单电控•两位五通阀,双电控•2x两位三通阀,常开•2x两位三通阀,常闭•2x两位三通阀,1x常开,1x常闭•2x两位三通阀,常闭,带集成背压保护•三位五通阀1)•2x两位两通阀,常闭•2x两位两通阀,1x常开,1x常闭特性单独连接•2…8个阀位,最多16个电磁线圈本安阀岛CPV10-EX-VI为本安设计，用于爆危场所，符合ATEX类别2(区域1)复合接头板复合接头板用于柜壁开口，便于在控制柜内安装，密封后，防护等级达IP65工作仅通过单独的阀连接本安电路驱动。
1)通过功能模块，不能组合复合接头板2019/11–Subject to change3Internet:/catalogue/...Subject to change –2019/114 Internet:/catalogue/...主要特性电接口单独连接，防爆CPV10-EX-VI 是一款本安型阀岛，用于区域1爆危场所(ATEX 类别2G)。
插装阀著名品牌Comatrol
EC
PVG
Steering
Med
Series 45 HIC (Hydraulic Integrated Circuit) Motors
Late
Cartridge DCV OC
2
MEMBER OF THE SAUER-DANFOSS GROUP
2
3
MEMBER OF THE SAUER-DANFOSS GROUP
Reggio-Emilia, Italy
Shanghai, China
• 200 employees
• 162 employees
• 20 employees
• Capacity:
400,000 HICs 3 million Cartridges
• Capacity:
400,000 HICs 3 million Cartridges
HIC Sales : 450,000 units 2010 2010 HIC Sales: $52M
9
MEMBER OF THE SAUER-DANFOSS GROUP
Comatrol Market Channels & Customers
$1.2B Screw-In Cartridge Market
April 2011
Our Customers Require Responsiveness!
Concept
Pre-sales timeline (System discussion) Propel
Protnce in project timeline
香港香港阀门配件有限公司阀门配件说明书
SHOWA 补偿器金属软接头目 录科目目录 ................................................................................................ 金属软接头..................................................................................EXF 110 .......................................................................................... EXF 115 .......................................................................................... EXF 122 .......................................................................................... EXS 210 .......................................................................................... EXS 255 .......................................................................................... 补偿器.........................................................................................EXDZ .............................................................................................. EXFZ .............................................................................................. EXWZ ............................................................................................. 软管和软网的尺寸及性能................................................................... 有变位时软管长度计算...................................................................... 正确的安装方式................................................................................ 法兰连接尺寸................................................................................... 单位换算表...................................................................................... 资料 不锈钢耐腐蚀表........................................................................ 软管产品选型、安装及实用注意事项.................................................... 0102-06020304050607-1207091113151819222328页码具有优异耐弯曲性能的焊接组装法兰连接形式。
WANDFLUH无泄漏电磁阀
型号代码
二位二通或二位三通型 四位三通型 安装接口 M 中压-电磁铁 S 高压-电磁铁 2 二通(连接口) 3 三通(连接口) 二位 四位 标称规格6 常闭, 电磁铁在A-侧 常开, 电磁铁在B-侧 标准标称电压UN: 12VDC G12 24VDC G24 设计代码（根据项目变化） A A 3 2 4 10 10 # #
1a 0b
110VAC R110 115VAC R115 230VAC R230
一般技术规格
说明 标称规格 结构 控制 安装 连接 允许的环境温度 安装位置 拧紧扭矩 重量: 二位二通,二位三通 四位三通 流量方向 二位二通,二位三通和四位三通座阀 NG10,符合ISO 4401-05 直动式无泄漏阀 电磁铁 板式 4个安装孔用于内六角螺钉M6×65 螺纹转接板 板式连接 纵向叠加系统 -20…+50℃ 任意,最好水平安装 MD = 9.5 Nm (等级8.8) m =4.6 kg m =6.4 kg 任意(见特性曲线)
电气控制
结构 标准标称电压 电压允差 防护等级 相对暂载率 切换循环 工作寿命 连接/电源 电磁铁: 电磁铁，湿式推杆形式，耐压 UN = 12 VDC，UN = 24 VDC UN=110 VAC*，UN =115 VAC*，UN = 230 VAC* AC = 50至60 Hz *整流器集成在插头内 可提供其他标称电压和性能的产品 ±10%,标称电压 IP 65,按EN 60 529 100%DF (见样本1.1-430) 15'000/h 107(理论切换次数) 电器插头连接按 ISO 4400/ DIN 43650, (2P+E),其他连接根据要求 -中压 SIN60V (样本1.1-145) -高压 SIS60V (样本1.1-150)
氢气集装格阀门规格
氢气集装格阀门规格
- 美国rego高压总阀HP9560：这是一款低温气体充装阀，适用于氢气、氧气、氮气等气体的集装格。
其连接形式为螺纹，材质为黄铜，公称通径为DN15，压力环境为高压，标准为美标，外形为微型，流动方向为单向，驱动方式为气动。
- 衬胶隔膜阀SEG41W-16P：此型号的阀门使用介质为氢气，阀门材质要求304不锈钢，阀门内部有阀座、阀芯杆组件、四氟隔膜垫片（PTEF+EPDM）组成，所有内部件均可以拆卸方便与更换，零泄漏标准。
其尺寸要求为：阀门长度127mm，法兰孔距85mm。
- 衬胶隔膜阀G41J-10/DN25：该型号的阀门使用介质同样为氢气，其阀门长度为145mm，法兰孔距为85mm。
- 衬胶隔膜阀G41J-10/DN50：这款型号的阀门使用介质也是氢气，其阀门长度为210mm，法兰孔距为125mm。
需要注意的是，以上规格仅供参考，实际应用中可能会有所不同。
在选择氢气集装格阀门时，建议咨询专业人士或参考相关标准和规范，以确保选择合适的阀门规格。
万福乐 插装式无泄漏座阀 直动式二位二通和两位三通型 手册说明书
样本号1.11-2060C 1/4版本 07 32北京分公司Tel: +86 10 5969 3960Fax: +86 10 5969 3958万福乐(上海)液压系统有限公司Tel: +86 21 6768 1216Fax: +86 21 6768 1218Wandfluh AG 插装式无泄漏电磁阀二位二通和两位三通型• 直动式• Q max = 40 l/min • p max = 350 barM22x1.5用途万福乐无泄漏阀适用于任何要求完全无泄漏关断的场合,能够实现可靠的密封加载、提升和夹紧等所有关键功能。
螺纹插装阀主要用于移动设备或固定设备的集成块,以及规格NG4-Mini 和NG6的板式和叠加阀体。
钢材料或铝材料块体插孔加工刀具可以租用或购买,请参考见样本2.13。
说明螺纹插装阀直动式二位二通和二位三通座阀带有M22×1.5螺纹,用于符合ISO 7789的插孔(二位三通型按万福乐标准),二位二通阀有“常闭”和“常开”两种形式。
可选配2种规格的滑动线圈, 钢壳体“M”型,或较为经济的“K”型塑模壳体线圈,塑模壳体线圈性能与钢壳体的相同。
更换线圈时无需断开液压回路。
电枢导套和阀体外表面镀锌防护处理。
功能耐压型换向电磁铁和反向复位弹簧切换座阀阀芯至开启或关断状态,由于座阀阀芯采用两侧等面积设计和压力平衡原理,所以没有额外的开启和关闭力,液流可以在2个方向通过座阀,座阀和导向柱塞配有O -型圈密封,带有金属密封的阀座具有双向截止无泄漏特性。
一般技术规格说明 直动式二位二通和二位三通无泄漏电磁阀结构 螺纹插装阀,差装孔标准ISO 7789控制 电磁铁,带可更换的滑套式线圈安装 旋入螺纹M22×1.5环境温度 -20…+50℃安装位置 任意拧紧扭矩 M D = 50 Nm 插件M D max = 5 Nm 线圈固定螺母质量: m = 0.49 kg 两位两通型塑料线圈 m = 0.63 kg 两位两通型钢线圈 m = 0.51 kg 两位三通型塑料线圈 m = 0.65 kg 两位三通型钢线圈流量任意(注意参考特性极限)液压技术规格油液矿物油,其他油液根据要求污染度等级 ISO 4406:1999,等级20/18/14 (要求过滤级ß10…16≥75) 参考样本号 1.0-50/2黏度范围 12 mm 2/s…320 mm 2/s 油液温度 -20…+70℃工作压力 p max = 350 bar 标称流量 Q N = 20 l/min 最大流量 Q max = 40 l/min压降Δp = <7 bar ,流量20 l/minISO 7789目录一般技术规格 .......................................1液压技术规格 .......................................1机能符号 .............................................2电气控制 .............................................2特性曲线 .............................................2尺寸/剖面图.......................................3/4插孔 ................................................3/4零件清单 .............................................4附件 (4)型号代码S D S PM22 - - / 35 #无泄漏座阀直动式高压螺纹插件M22x1.5二位二通,“常闭” BA 二位二通,“常开” AB 二位三通 FG标准-标称电压U N :12VDC G12 110VAC R110 24VDC G24 115VAC R115 230VAC R230滑套式线圈: 塑料模制K (仅适用12 VDC 和24 VDC ) 钢壳体M 连接器 ISO 4400 / DIN 43650D 插头: AMP Junior-TimerJ 线圈类型设计代码(依据项目变化)样本号1.11-2060C 2/4版本 07 32北京分公司Tel: +86 10 5969 3960Fax: +86 10 5969 3958万福乐(上海)液压系统有限公司Tel: +86 21 6768 1216Fax: +86 21 6768 1218Wandfluh AG ******************.cn 机能符号SDSPM22-BA... SDSPM22-AB...SDSPM22-FG... 过渡机能“FG"电气控制结构湿式推力型耐压电磁铁带可更换的滑套式线圈标准标称电压 U N = 12 VDC, 24 VDCU N = 110 VAC*, 115 VAC*, 230 VAC* AC = 50至60 Hz*整流器集成在插头内可提供其他标称电压和性能的产品电压允差 ±10%,标称电压防护等级 IP 65,按EN 60 529(如果安装正确）相对暂载率 100%DF (见样本1.1-430)切换循环 15'000/h工作寿命 107(理论切换次数)连接/电源 具体见型号代码电磁铁类型: -钢线圈（M.35/16) (样本1.1-170)-塑料线圈（K.35/16)(样本1.1-172)p=f (Q ) 低于标称电压10%和在最高环境温度时的特性极限 二位二通型,“常闭”[BA]p=f (Q ) 低于标称电压10%和在最高环境温度时的特性极限 二位二通型,“常开”[AB]p=f (Q ) 低于标称电压10%和在最高环境温度时的特性极限 二位三通型[FG]Δp =f (Q )压力损失/流量特性流动方向品种1→2 2→1SDSPM22-BA-…/ “M” 1 2SDSPM22-BA-…/ “K”34流动方向品种1→2 2→1SDSPM22-AB-…/ “M” 1 2SDSPM22-AB-…/ “K”12流动方向品种1→22→1 2→3 3→2SDSPM22-FG-…/ “M” 4 1 2 3SDSPM22-FG-…/ “K”4156特性曲线 油液黏度 υ=30 mm 2/s备注!在不同的应用回路中，实际通流量允许大于额定流量,但是在换向期间,总流量(3→2和2→1)必须不大于Q=30 l/min 。
NORGREN电磁阀连接和安装方法详解
NORGREN电磁阀连接和安装方法详解一、焊接方式NORGREN电磁阀这种连接适用于各种压力和温度，在较荷刻的条件下使用时，比法兰连接更为牢靠。
但是焊接连接的阀门拆卸和重新安装都比较困难，所以它的使用限于通常能长期牢靠地运行，或使用条件荷刻、温度较高的场合。
如火力发电站、核能工程、乙烯工程的管道上。
公称通径在50mm以下的焊接阀门通常具有焊接插口来承接荷平面端的管道。
由于承插焊接在插口与管道间形成缝隙，因而有可能使缝隙受到某些介质的腐蚀，同时管道的振动会使连接部位疲乏，因此承插焊接的使用受到肯定的限制。
在公称直径较大，使用条件荷刻，温度较高的场合，阀体常采纳坡口对焊接，同时，对焊接缝有原格要求，必须选用技术过硬的焊工完成此项工作。
二、NORGREN电磁阀，其安装和拆卸都比较便利。
但是比螺纹连接的阀门沉重，相应价格也价高。
故它适用于各种通径和压力的管道连接。
但是，当温度超出350度时，由于螺栓、垫片和法兰一变松弛，也明显地降低螺栓的负荷，对受力很大的法兰连接可能产生泄漏。
三、NORGREN电磁阀这种连接通常是将阀门进出端部加工成锥管或直管螺纹，可使其连接到锥管螺纹接头或管路上。
由于这种连接可能显现较大的泄漏沟道，故可用密封剂、密封胶带或填料来堵塞这些沟道。
假如阀体的料子是可以焊接的，但膨胀系数差异很大，或者工作温度的变更幅度范围较大，螺纹连接部必须进行蜜封焊。
螺纹连接的阀门重要是公称通经在50mm以下的阀门。
假如通径尺寸过大，连接部的安装和密封非常困难。
NORGREN电磁阀安装前的准备工作1、保证NORGREN电磁阀安装位置管线在同轴位置上，管线上两片法兰应保持平行，确认管线能够经受球阀自身重量，假如发觉管线不能经受球阀重量，则在安装前为管线配备相应的支撑。
2、确认管线内是否有杂质、焊渣等，必须要把管线内吹扫干净。
核对电动偏心半球阀铭牌，并对球阀进行全开全闭数次操作，确认阀门能够正常工作，再全面检查一次阀门的各个细节，保证阀门完好无损。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
TECHNICAL DATASTRUCTUREXOPERATIONOPTIONSYMax.Operating pressure: 350 Rated flow: 30 Cavity-Tooling: 08W-2Installation torque: 25-35Weight: 0.13Z2A2 Ports 、20 Watt. CoilNon-adjustableNkgNm l/min bar01Fluids-Temperatures: -40~120Internal Leakage:Filtration: 25 μm nominal or better Minimun Voltage Required:Coils must be ordered separately Mounting Position:℃unrestricted0.15cc/minute(3 drops/minute) max.at 350 bar 90 % of nominalNormally-ClosedNo Reverse Flow Energized1210864240302010P r e s s u r e - P (b a r )Flow-Q(l/min)14②t o ①TECHNICAL DATASTRUCTUREXOPERATIONOPTIONSYMax.Operating pressure: 350 Rated flow: 40 Cavity-Tooling: 08W-2Installation torque: 25-35 Weight: 0.13 Z2A2 Ports 、20 Watt. CoilNon-adjustable N kg Nm l/min bar642503020100P r e s s u r e - P (b a r )Flow-Q(l/min)01Fluids-Temperatures: -40~120Internal Leakage:Filtration: 25 μm nominal or better Minimun Voltage Required:Coils must be ordered separately Mounting Position:℃unrestricted0.15cc/minute(3 drops/minute) max.at 210 bar 90 % of nominal8②t o ①Normally-ClosedNo Reverse Flow Energized40TECHNICAL DATASTRUCTUREXOPERATIONOPTIONSYMax.Operating pressure: 350 Rated flow: 70 Cavity-Tooling: 10W-2Installation torque: 35-45 Weight: 0.16Z2A2 Ports 、20 Watt. CoilNon-adjustable NkgNml/minbar01Fluids-Temperatures: -40~120Internal Leakage:Filtration: 25 μm nominal or betterMinimun Voltage Required:Coils must be ordered separately Mounting Position:℃unrestricted0.15cc/minute(3 drops/minute) max.at 350 bar 90 % of nominalNormally-ClosedNo Reverse Flow EnergizedFlow-Q(l/min)P r e s s u r e - P (b a r )102060802468101230405070②t o ①TECHNICAL DATASTRUCTUREXOPERATIONOPTIONSYMax.Operating pressure: 350 Rated flow: 150 Cavity-Tooling: 12W-2Installation torque: 45-55 Weight: 0.23Z2A2 Ports 、20 Watt. CoilNon-adjustable NkgNm l/minbar12108642150120906030P r e s s u r e - P (b a r )Flow-Q(l/min)01Fluids-Temperatures: -40~120Internal Leakage:Filtration: 25 μm nominal or betterMinimun Voltage Required:Coils must be ordered separately Mounting Position:℃unrestricted0.15cc/minute(3 drops/minute) max.at 350 bar 90 % of nominal②t o ①Normally-ClosedNo Reverse Flow EnergizedTECHNICAL DATASTRUCTUREXOPERATIONOPTIONSYMax.Operating pressure: 350 Rated flow: 150 Cavity-Tooling: 16W-2Installation torque: 60-70 Weight: 0.35 Z2A 2 Ports 、20 Watt. CoilNon-adjustable Nkg Nm l/minbar12108642150120906030P r e s s u r e - P (b a r )Flow-Q(l/min)01Fluids-Temperatures: -40~120Internal Leakage:Filtration: 25 μm nominal or betterMinimun Voltage Required:Coils must be ordered separately Mounting Position:℃unrestricted0.15cc/minute(3 drops/minute) max.at 350 bar 90 % of nominal②t o ①Normally-ClosedNo Reverse Flow EnergizedTECHNICAL DATASTRUCTUREXOPERATIONOPTIONSYMax.Operating pressure: 350 Rated flow: 70 Cavity-Tooling: 17E-2Installation torque: 45-55 Weight: 0.22Z2A2 Ports 、20 Watt. CoilNon-adjustableNkgNm l/min bar01Fluids-Temperatures: -40~120Internal Leakage:Filtration: 25 μm nominal or betterMinimun Voltage Required:Coils must be ordered separately Mounting Position:℃unrestricted0.15cc/minute(3 drops/minute) max.at 350 bar 90 % of nominalFlow-Q(l/min)P r e s s u r e - P (b a r )102060802468101230405070②t o ①Normally-ClosedNo Reverse Flow EnergizedTECHNICAL DATASTRUCTUREXOPERATIONOPTIONSYMax.Operating pressure: 350 Rated flow: 150 Cavity-Tooling: 21E-2Installation torque: 70-90 Weight: 0.35Z2A2 Ports 、20 Watt. CoilNon-adjustableNkgNm l/min bar01Fluids-Temperatures: -40~120Internal Leakage:Filtration: 25 μm nominal or better Minimun Voltage Required:Coils must be ordered separately Mounting Position:℃unrestricted0.15cc/minute(3 drops/minute) max.at 350 bar 90 % of nominalFlow-Q(l/min)P r e s s u r e - P (b a r )3060901201502468101214②t o ①Normally-ClosedNo Reverse Flow EnergizedSOLENOID OPERATED VALVES(Pilot Operated)TECHNICAL DATASTRUCTUREXOPERATIONOPTIONSYMax.Operating pressure: 350 Rated flow: 40 Cavity-Tooling: 13A-2Installation torque: 25-35 Weight: 0.13 Z2A2 Ports 、20 Watt. CoilNon-adjustable N kgNm l/minbar642503020100P r e s s u r e - P (b a r )Flow-Q(l/min)01Fluids-Temperatures: -40~120Internal Leakage:Filtration: 25 μm nominal or better Minimun Voltage Required:Coils must be ordered separately Mounting Position:℃unrestricted0.15cc/minute (3 drops/minute) max.at 210 bar 90 % of nominal8②t o ①Normally-ClosedNo Reverse Flow Energized40GENERAL INDEXSOLENOID OPERATED VALVESTECHNICAL DATASTRUCTUREXOPERATIONOPTIONSYMax.Operating pressure: 250Rated flow: 20 Cavity-Tooling: 08W-2Installation torque: 25-35 Weight: 0.13Z2A2 Ports 、20 Watt. CoilLkgNm l/min bar01Fluids-Temperatures: -40~120Internal Leakage:Filtration: 25 μm nominal or better Minimun Voltage Required:Coils must be ordered separately Mounting Position:℃unrestricted0.15cc/minute (3 drops/minute) max.at 250 bar 90 % of nominalFlow-Q(l/min)P r e s s u r e - P (b a r )51015202524681012142 t o1Normally-ClosedNo Reverse Flow EnergizedPULL STYPE(CABLE OPERATED)TECHNICAL DATASTRUCTUREXOPERATIONYMax.Operating pressure: 350 Rated flow: 40 Cavity-Tooling: 08W-2Installation torque: 25-35Weight: 0.132A2 Ports 、20 Watt. CoilkgNm l/min bar 01Fluids-Temperatures: -40~120Internal Leakage:Filtration: 25 μm nominal or better Minimun Voltage Required:Coils must be ordered separately Mounting Position:℃unrestricted0.15cc/minute(3 drops/minute) max.at 350 bar 90 % of nominalWhen de-energized, the valve acts as a check vlave,allowing flow from ①to ②,while blocking flow from ②to ①.When energized,the cartridge's poppet lifts to Normally-ClosedNo Reverse Flow EnergizedN Non-adjustable ZOPTIONSFlow-Q(l/min)14106240②t o ①16P r e s s u r e - P (b a r )1020304812TECHNICAL DATASTRUCTUREXOPERATIONYMax.Operating pressure: 350 Rated flow: 70 Cavity-Tooling: 10W-2Installation torque: 35-45 Weight: 0.162A2 Ports 、20 Watt. CoilkgNm l/min bar01Fluids-Temperatures: -40~120Internal Leakage:Filtration: 25 μm nominal or betterMinimun Voltage Required:Coils must be ordered separately Mounting Position:℃unrestricted0.15cc/minute(3 drops/minute) max.at 350 bar 90 % of nominalWhen de-energized, the valve acts as a check vlave,allowing flow from ①to ②,while blocking flow from ②to ①.When energized,the cartridge's poppet lifts to Normally-ClosedNo Reverse Flow Energized1210864280604020P r e s s u r e - P (b a r )Flow-Q(l/min)14②t o①N Non-adjustable ZOPTIONSTECHNICAL DATASTRUCTUREXOPERATIONYMax.Operating pressure: 350 Rated flow: 150 Cavity-Tooling: 12W-2Installation torque: 45-55 Weight: 0.232A2 Ports 、20 Watt. CoilkgNm l/minbar30252015105150120906030P r e s s u r e - P (b a r )Flow-Q(l/min)01Fluids-Temperatures: -40~120Internal Leakage:Filtration: 25 μm nominal or betterMinimun Voltage Required:Coils must be ordered separately Mounting Position:℃unrestricted0.15cc/minute(3 drops/minute) max.at 350 bar 90 % of nominalWhen de-energized, the valve acts as a check vlave,allowing flow from ①to ②,while blocking flow from ②to ①.When energized,the cartridge's poppet lifts to ②to ①Normally-ClosedNo Reverse Flow EnergizedN Non-adjustable ZOPTIONSTECHNICAL DATASTRUCTUREXOPERATIONYMax.Operating pressure: 350 Rated flow: 150 Cavity-Tooling: 16W-2Installation torque: 60-70 Weight: 0.352A2 Ports 、20 Watt. CoilkgNm l/minbar30252015105150120906030P r e s s u r e - P (b a r )Flow-Q(l/min)01Fluids-Temperatures: -40~120Internal Leakage:Filtration: 25 μm nominal or betterMinimun Voltage Required:Coils must be ordered separately Mounting Position:℃unrestricted0.15cc/minute(3 drops/minute) max.at 350 bar 90 % of nominalWhen de-energized, the valve acts as a check vlave,allowing flow from ①to ②,while blocking flow from ②to ①.When energized,the cartridge's poppet lifts to ②to ①Normally-ClosedNo Reverse Flow EnergizedNNon-adjustableZOPTIONSTECHNICAL DATASTRUCTUREXOPERATIONYMax.Operating pressure: 350 Rated flow: 70 Cavity-Tooling: 17E-2Installation torque: 45-55 Weight: 0.222A2 Ports 、20 Watt. CoilkgNm l/minbar 01Fluids-Temperatures: -40~120Internal Leakage:Filtration: 25 μm nominal or betterMinimun Voltage Required:Coils must be ordered separately Mounting Position:℃unrestricted0.15cc/minute(3 drops/minute) max.at 350 bar 90 % of nominalWhen de-energized, the valve acts as a check vlave,allowing flow from ①to ②,while blocking flow from ②to ①.When energized,the cartridge's poppet lifts to Normally-ClosedNo Reverse Flow EnergizedNNon-adjustableZOPTIONS②t o①14Flow-Q(l/min)P r e s s u r e - P (b a r )2040608024681012TECHNICAL DATASTRUCTUREXOPERATIONOPTIONSYMax.Operating pressure: 350 Rated flow: 150 Cavity-Tooling: 21E-2Installation torque: 70-90 Weight: 0.35Z2A2 Ports 、20 Watt. CoilNon-adjustableNkgNm l/minbar30252015105150120906030P r e s s u r e - P (b a r )Flow-Q(l/min)01Fluids-Temperatures: -40~120Internal Leakage:Filtration: 25 μm nominal or betterMinimun Voltage Required:Coils must be ordered separately Mounting Position:℃unrestricted0.15cc/minute(3 drops/minute) max.at 350 bar 90 % of nominalWhen de-energized, the valve acts as a check vlave,allowing flow from ①to ②,while blocking flow from ②to ①.When energized,the cartridge's poppet lifts to ②to ①Normally-ClosedNo Reverse Flow EnergizedTECHNICAL DATASTRUCTUREXOPERATIONYMax.Operating pressure: 350 Rated flow: 30 Cavity-Tooling: 08W-2Installation torque: 25-35 Weight: 0.112A2 Ports 、20 Watt. CoilkgNm l/min bar02Fluids-Temperatures: -40~120Internal Leakage:Filtration: 25 μm nominal or betterMinimun Voltage Required:Coils must be ordered separately Mounting Position:℃unrestricted0.15cc/minute(3 drops/minute) max.at 210 bar 90 % of nominalNormally-OpenNo Reverse Flow De-energized40②t o ①8Flow-Q(l/min)P r e s s u r e - P (b a r )102030246Push StyleN Non-adjustable ZOPTIONS101214TECHNICAL DATASTRUCTUREXOPERATIONYMax.Operating pressure: 350 Rated flow: 40 Cavity-Tooling: 08W-2Installation torque: 25-35 Weight: 0.132A2 Ports 、20 Watt. CoilkgNm l/min bar02Fluids-Temperatures: -40~120Internal Leakage:Filtration: 25 μm nominal or better Minimun Voltage Required:Coils must be ordered separately Mounting Position:℃unrestricted0.15cc/minute(3 drops/minute) max.at 210 bar 90 % of nominalNormally-OpenNo Reverse Flow De-energized40②t o ①8Flow-Q(l/min)P r e s s u r e - P (b a r )010203050246Push StyleN Non-adjustable ZOPTIONSTECHNICAL DATASTRUCTUREXOPERATIONYMax.Operating pressure: 350 Rated flow: 70 Cavity-Tooling: 10W-2Installation torque: 35-45 Weight: 0.162A2 Ports 、20 Watt. CoilkgNml/minbar02Fluids-Temperatures: -40~120Internal Leakage:Filtration: 25 μm nominal or betterMinimun Voltage Required:Coils must be ordered separately Mounting Position:℃unrestricted0.15cc/minute(3 drops/minute) max.at 350 bar 90 % of nominalNormally-OpenNo Reverse Flow De-energized②t o ①705040301210864280602010P r e s s u r e - P (b a r )Flow-Q(l/min)OPTIONSZNon-adjustable N Push StyleTECHNICAL DATASTRUCTUREXOPERATIONYMax.Operating pressure: 350 Rated flow: 150 Cavity-Tooling: 12W-2Installation torque: 45-55 Weight: 0.232A2 Ports 、20 Watt. CoilkgNm l/min bar02Fluids-Temperatures: -40~120Internal Leakage:Filtration: 25 μm nominal or betterMinimun Voltage Required:Coils must be ordered separately Mounting Position:℃unrestricted0.15cc/minute(3 drops/minute) max.at 350 bar 90 % of nominalNormally-OpenNo Reverse Flow De-energized②t o ①Flow-Q(l/min)P r e s s u r e - P (b a r )30609012015024681012Push StyleN Non-adjustable ZOPTIONSTECHNICAL DATASTRUCTUREXOPERATIONYMax.Operating pressure: 350 Rated flow: 150 Cavity-Tooling: 16W-2Installation torque: 60-70 Weight: 0.352A2 Ports 、20 Watt. Coilkg Nm l/minbar02Fluids-Temperatures: -40~120Internal Leakage:Filtration: 25 μm nominal or betterMinimun Voltage Required:Coils must be ordered separately Mounting Position:℃unrestricted0.15cc/minute(3 drops/minute) max.at 350 bar 90 % of nominalNormally-OpenNo Reverse Flow De-energized12108642150120906030P r e s s u r e - P (b a r )Flow-Q(l/min)②t o ①N Non-adjustable ZOPTIONSTECHNICAL DATASTRUCTUREXOPERATIONYMax.Operating pressure: 350 Rated flow: 70 Cavity-Tooling: 17E-2Installation torque: 45-55 Weight: 0.222A2 Ports 、20 Watt. Coilkg Nm l/minbar02Fluids-Temperatures: -40~120Internal Leakage:Filtration: 25 μm nominal or betterMinimun Voltage Required:Coils must be ordered separately Mounting Position:℃unrestricted0.15cc/minute(3 drops/minute) max.at 350 bar 90 % of nominalNormally-OpenNo Reverse Flow De-energizedFlow-Q(l/min)P r e s s u r e - P (b a r )102060802468101230405070②t o ①Push StyleN Non-adjustable ZOPTIONSTECHNICAL DATASTRUCTUREXOPERATIONYMax.Operating pressure: 350 Rated flow: 150 Cavity-Tooling: 21E-2Installation torque: 70-90 Weight: 0.352A2 Ports 、20 Watt. CoilkgNml/minbar02Fluids-Temperatures: -40~120Internal Leakage:Filtration: 25 μm nominal or betterMinimun Voltage Required:Coils must be ordered separately Mounting Position:℃unrestricted0.15cc/minute(3 drops/minute) max.at 350 bar 90 % of nominalNormally-OpenNo Reverse Flow De-energized②t o ①Flow-Q(l/min)P r e s s u r e - P (b a r )30609012015024681012OPTIONSZNon-adjustable N Push StylePTECHNICAL DATASTRUCTUREXOPERATIONYMax.Operating pressure: 350 Rated flow: 40 Cavity-Tooling: 13A-2Installation torque: 25-35 Weight: 0.142A2 Ports 、20 Watt. CoilkgNm l/minbar02Fluids-Temperatures: -40~120Internal Leakage:Filtration: 25 μm nominal or better Minimun Voltage Required:Coils must be ordered separately Mounting Position:℃unrestricted0.15cc/minute (3 drops/minute) max.at 210 bar 90 % of nominalNormally-OpenNo Reverse Flow De-energized40②t o ①8Flow-Q(l/min)P r e s s u r e - P (b a r )010203050246Push StyleN Non-adjustable ZOPTIONS(Pilot Operated)SOLENOID OPERATED VALVESGENERAL INDEXTECHNICAL DATASTRUCTUREXOPERATIONYMax.Operating pressure: 350 Rated flow: 40 Cavity-Tooling: 08W-2Installation torque: 45-55 Weight: 0.132A2 Ports 、20 Watt. CoilkgNm l/min bar03Fluids-Temperatures: -40~120Internal Leakage:Filtration: 25 μm nominal or better Minimun Voltage Required:Coils must be ordered separately Mounting Position:℃unrestricted0.15cc/minute(3 drops/minute) max.at 350 bar 90 % of nominalNormally-Closed,Reverse FlowEnergized,Nose-in,Side-out OperationNNon-adjustableZOPTIONSFlow-Q(l/min)P r e s s u r e - P (b a r )102030405101520①t o②TECHNICAL DATASTRUCTUREXOPERATIONYMax.Operating pressure: 350 Rated flow: 70 Cavity-Tooling: 17E-2Installation torque: 45-55 Weight: 0.222A2 Ports 、20 Watt. CoilkgNml/min bar03Fluids-Temperatures: -40~120Internal Leakage:Filtration: 25 μm nominal or betterMinimun Voltage Required:Coils must be ordered separately Mounting Position:℃unrestricted0.15cc/minute(3 drops/minute) max.at 350 bar 90 % of nominalNormally-Closed,Reverse FlowEnergized,Nose-in,Side-out OperationNNon-adjustableZOPTIONSFlow-Q(l/min)①t o ②7060P r e s s u r e - P (b a r )102030405051015TECHNICAL DATASTRUCTUREXOPERATIONYMax.Operating pressure: 350 Rated flow: 150 Cavity-Tooling: 21E-2Installation torque: 70-90 Weight: 0.352A2 Ports 、20 Watt. CoilkgNm l/minbar 03Fluids-Temperatures: -40~120Internal Leakage:Filtration: 25 μm nominal or better Minimun Voltage Required:Coils must be ordered separately Mounting Position:℃unrestricted0.15cc/minute (3 drops/minute) max.at 350 bar 90 % of nominalNormally-Closed,Reverse FlowEnergized,Nose-in,Side-out OperationNNon-adjustableZOPTIONSFlow-Q(l/min)20①t o②P r e s s u r e - P (b a r )30609012015051015TECHNICAL DATASTRUCTUREXOPERATIONYMax.Operating pressure: 350 Rated flow: 260 Cavity-Tooling: 04E-2Installation torque: 110-130 Weight: 1.132A2 Ports 、20 Watt. Coilkg Nm l/minbar03Fluids-Temperatures: -40~120Internal Leakage:Filtration: 25 μm nominal or better Minimun Voltage Required:Coils must be ordered separately Mounting Position:℃unrestricted0.15cc/minute (3 drops/minute) max.at 350 bar 90 % of nominalNormally-Closed,Reverse FlowEnergized,Nose-in,Side-out OperationNNon-adjustableZOPTIONS12①to ②Flow-Q(l/min)P r e s s u r e - P (b a r )060120180240300369TECHNICAL DATASTRUCTUREXOPERATIONYMax.Operating pressure: 350 Rated flow: 40 Cavity-Tooling: 08W-2Installation torque: 25-35 Weight: 0.132A2 Ports 、20 Watt. CoilkgNm l/min bar151055040302010P r e s s u r e - P (b a r )Flow-Q(l/min)04Fluids-Temperatures: -40~120Internal Leakage:Filtration: 25 μm nominal or better Minimun Voltage Required:Coils must be ordered separatelyMounting Position:℃unrestricted0.15cc/minute(3 drops/minute) max.at 350 bar 90 % of nominalNormally-Open,Reverse FlowDe-energized ,Nose-in,Side-out Operation20OPTIONSZNon-adjustable N Push Style①t o ②TECHNICAL DATASTRUCTUREXOPERATIONYMax.Operating pressure: 350 Rated flow: 260 Cavity-Tooling: 04E-2Installation torque: 110-130 Weight: 1.132A2 Ports 、20 Watt. Coilkg Nm l/minbar963300240180120600P r e s s u r e - P (b a r )Flow-Q(l/min)04Fluids-Temperatures: -40~120Internal Leakage:Filtration: 25 μm nominal or better Minimun Voltage Required:Coils must be ordered separately Mounting Position:℃unrestricted0.15cc/minute (3 drops/minute) max.at 350 bar 90 % of nominal①t o ②Normally-Open,Reverse FlowDe-energized ,Nose-in,Side-out Operation12OPTIONSZNon-adjustable N Push StyleTECHNICAL DATASTRUCTUREXOPERATIONOPTIONSYMax.Operating pressure: 350 Rated flow: 30 Cavity-Tooling: 08W-2Installation torque: 25-35Weight: 0.13Z2A2 Ports 、20 Watt. CoilNon-adjustableNkgNm l/min bar05Fluids-Temperatures: -40~120Internal Leakage:Filtration: 25 μm nominal or better Minimun Voltage Required:Coils must be ordered separately Mounting Position:℃unrestricted0.15cc/minute(3 drops/minute) max.at 350 bar 90 % of nominalNormally-ClosedReverse Flow Energized1210864240302010P r e s s u r e - P (b a r )Flow-Q(l/min)14②t o ①TECHNICAL DATASTRUCTUREXOPERATIONOPTIONSYMax.Operating pressure: 350 Rated flow: 40 Cavity-Tooling: 08W-2Installation torque: 25-35 Weight: 0.13 Z2A2 Ports 、20 Watt. CoilNon-adjustable N kg Nm l/min bar05Fluids-Temperatures: -40~120Internal Leakage:Filtration: 25 μm nominal or betterMinimun Voltage Required:Coils must be ordered separately Mounting Position:℃unrestricted0.15cc/minute(3 drops/minute) max.at 210 bar 90 % of nominalNormally-ClosedReverse Flow Energized②to ①Flow-Q(l/min)P r e s s u r e - P (b a r )102030405024681012TECHNICAL DATASTRUCTUREXOPERATIONOPTIONSYMax.Operating pressure: 350 Rated flow: 70 Cavity-Tooling: 10W-2Installation torque: 35-45 Weight: 0.16Z2A2 Ports 、20 Watt. CoilNon-adjustable NkgNml/minbar05Fluids-Temperatures: -40~120Internal Leakage:Filtration: 25 μm nominal or betterMinimun Voltage Required:Coils must be ordered separately Mounting Position:℃unrestricted0.15cc/minute(3 drops/minute) max.at 350 bar 90 % of nominalNormally-ClosedReverse Flow EnergizedFlow-Q(l/min)P r e s s u r e - P (b a r )102060802468101230405070②t o ①TECHNICAL DATASTRUCTUREXOPERATIONOPTIONSYMax.Operating pressure: 350 Rated flow: 150 Cavity-Tooling: 12W-2Installation torque: 45-55 Weight: 0.23 Z2A2 Ports 、20 Watt. CoilNon-adjustable N kg Nml/minbar12108642150120906030P r e s s u r e - P (b a r )Flow-Q(l/min)05Fluids-Temperatures: -40~120Internal Leakage:Filtration: 25 μm nominal or betterMinimun Voltage Required:Coils must be ordered separately Mounting Position:℃unrestricted0.15cc/minute(3 drops/minute) max.at 350 bar 90 % of nominal②t o ①Normally-ClosedReverse Flow EnergizedTECHNICAL DATASTRUCTUREXOPERATIONOPTIONSYMax.Operating pressure: 350 Rated flow: 150 Cavity-Tooling: 16W-2Installation torque: 60-70 Weight: 0.35 Z2A 2 Ports 、20 Watt. CoilNon-adjustable N kg Nm l/minbar12108642150120906030P r e s s u r e - P (b a r )Flow-Q(l/min)05Fluids-Temperatures: -40~120Internal Leakage:Filtration: 25 μm nominal or betterMinimun Voltage Required:Coils must be ordered separately Mounting Position:℃unrestricted0.15cc/minute(3 drops/minute) max.at 350 bar 90 % of nominal②t o ①Normally-ClosedReverse Flow EnergizedTECHNICAL DATASTRUCTUREXOPERATIONOPTIONSYMax.Operating pressure: 350 Rated flow: 70 Cavity-Tooling: 17E-2Installation torque: 45-55 Weight: 0.22Z2A2 Ports 、20 Watt. CoilNon-adjustableNkgNm l/min bar05Fluids-Temperatures: -40~120Internal Leakage:Filtration: 25 μm nominal or betterMinimun Voltage Required:Coils must be ordered separately Mounting Position:℃unrestricted0.15cc/minute(3 drops/minute) max.at 350 bar 90 % of nominalFlow-Q(l/min)P r e s s u r e - P (b a r )102060802468101230405070②t o ①Normally-ClosedReverse Flow EnergizedTECHNICAL DATASTRUCTUREXOPERATIONOPTIONSYMax.Operating pressure: 350 Rated flow: 150 Cavity-Tooling: 21E-2Installation torque: 70-90 Weight: 0.35Z2A2 Ports 、20 Watt. CoilNon-adjustableNkgNml/minbar05Fluids-Temperatures: -40~120Internal Leakage:Filtration: 25 μm nominal or better Minimun Voltage Required:Coils must be ordered separately Mounting Position:℃unrestricted0.15cc/minute(3 drops/minute) max.at 350 bar 90 % of nominalFlow-Q(l/min)P r e s s u r e - P (b a r )3060901201502468101214②t o ①Normally-ClosedReverse Flow EnergizedTECHNICAL DATASTRUCTUREXOPERATIONYMax.Operating pressure: 350 Rated flow: 40 Cavity-Tooling: 08W-2Installation torque: 25-35Weight: 0.132A2 Ports 、20 Watt. CoilkgNm l/min bar 05Fluids-Temperatures: -40~120Internal Leakage:Filtration: 25 μm nominal or better Minimun Voltage Required:Coils must be ordered separately Mounting Position:℃unrestricted0.15cc/minute(3 drops/minute) max.at 350 bar 90 % of nominalNormally-ClosedReverse Flow EnergizedN Non-adjustable ZOPTIONSFlow-Q(l/min)14106240②t o ①16P r e s s u r e - P (b a r )1020304812TECHNICAL DATASTRUCTUREXOPERATIONYMax.Operating pressure: 350 Rated flow: 70 Cavity-Tooling: 17E-2Installation torque: 45-55 Weight: 0.222A2 Ports 、20 Watt. CoilkgNm l/minbar 05Fluids-Temperatures: -40~120Internal Leakage:Filtration: 25 μm nominal or betterMinimun Voltage Required:Coils must be ordered separately Mounting Position:℃unrestricted0.15cc/minute(3 drops/minute) max.at 350 bar 90 % of nominalNormally-ClosedReverse Flow EnergizedNNon-adjustableZOPTIONS②t o①14Flow-Q(l/min)P r e s s u r e - P (b a r )2040608024681012TECHNICAL DATASTRUCTUREXOPERATIONOPTIONSYMax.Operating pressure: 350 Rated flow: 150 Cavity-Tooling: 21E-2Installation torque: 70-90 Weight: 0.35Z2A2 Ports 、20 Watt. CoilNon-adjustableNkg Nm l/minbar05Fluids-Temperatures: -40~120Internal Leakage:Filtration: 25 μm nominal or better Minimun Voltage Required:Coils must be ordered separately Mounting Position:℃unrestricted0.15cc/minute(3 drops/minute) max.at 350 bar 90 % of nominalFlow-Q(l/min)P r e s s u r e - P (b a r )3060901201505101520253035Normally-ClosedReverse Flow EnergizedTECHNICAL DATASTRUCTUREXOPERATIONYMax.Operating pressure: 350 Rated flow: 30 Cavity-Tooling: 08W-2Installation torque: 25-35Weight: 0.132A2 Ports 、20 Watt. CoilkgNm l/min bar06Fluids-Temperatures: -40~120Internal Leakage:Filtration: 25 μm nominal or better Minimun Voltage Required:Coils must be ordered separately Mounting Position:℃unrestricted0.15cc/minute(3 drops/minute) max.at 350 bar 90 % of nominalNormally-OpenReverse Flow De-Energized1210864240302010P r e s s u r e - P (b a r )Flow-Q(l/min)14②t o ①Push StyleN Non-adjustable ZOPTIONSTECHNICAL DATASTRUCTUREXOPERATIONYMax.Operating pressure: 350 Rated flow: 40 Cavity-Tooling: 08W-2Installation torque: 25-35Weight: 0.132A2 Ports 、20 Watt. CoilkgNm l/min bar06Fluids-Temperatures: -40~120Internal Leakage:Filtration: 25 μm nominal or better Minimun Voltage Required:Coils must be ordered separately Mounting Position:℃unrestricted0.15cc/minute(3 drops/minute) max.at 350 bar 90 % of nominalNormally-OpenReverse Flow De-Energized2 t o114121086425040302010P r e s s u r e - P (b a r )Flow-Q(l/min)Push StyleN Non-adjustable ZOPTIONS。