业余无线电中继46页PPT
业余无线电入门培训教材ppt课件
山东业余无线电中继表之欧阳育创编
区域接收下差亚音备注济南439.750 5 88.5438.600 5466.400 10438.550 5.5 数字反向226或411439.750 5 88.5438.600 5439.750 5438.550 5 88.5淄博439.050 5 88.5 沂源鲁山，1108米439.650 5439.200 5438.800 5张店439.825 5 88.5淄川439.625 5博山439.900 5桓台439.275 5 88.5147.975 3.8泰安147.900 3.8 泰山,1532米439.850 5 88.5 泰山,1532米438.675 5 88.5438.650 5 88.5 499米438.525 5 88.5145.500 0.6439.750 5439.175 5 88.5 徂徕山,1027米新泰439.750 5439.650 5德州439.700 7 94.8临盘439.475 5邹平438.850 5438.650 5齐河439.900 5 88.5潍坊439.250 5439.150 5临朐439.650 5439.675 5 沂山，1031米439.625 5昌邑439.200 5滨海439.300 5 88.5青州438.550 5 88.5 检修439.000 5 代用145.300 0.6439.575 5寿光439.350 5 88.5昌乐439.550 5青岛438.800 7 88.5 自驾438.700 5 88.5 BR4IA438.750 5438.550 5 88.5 BY4LQD439.900 7 88.5城阳439.175 6.5 88.5438.175 5 88.5 应急439.725 5 88.5即墨439.025 5 88.5 120米崂山438.885 5 88.5黄岛439.150 5 88.5胶州438.450 5 88.5胶南439.675 5 88.5439.800 5 107.2147.825 3.8 88.5莱芜439.525 5 88.5439.375 5 88.5菏泽439.600 5 114.8东营438.700 5438.300 5438.900 5 88.5147.975 3.6439.300 5河口438.150 5 河口区枣庄439.350 5439.550 5 88.5147.9375 3.9山亭438.950 5 88.5滕州438.500 5 88.5438.600 5 88.5439.600 5 88.5438.300 5 77临沂439.750 5 88.5 BY4LY 137.5米145.750 0.6 88.5 BY4LY 蒙山，1109米439.300 8 74.4 临沂阳光户外运动俱乐部罗庄439.675 5 88.5郯城439.600 5 88.5147.900 3.8 88.5439.625 5 88.5烟台438.250 5 103.5147.900 3.8蓬莱439.375 9 88.5 测试中龙口439.075 5 110.9 东城区439.100 5 110.9 西城区莱阳438.625 5438.650 5招远438.900 5莱州438.200 5莱阳438.625 5 91.5日照439.100 7 88.5 浮来山莒县439.875 5 88.5147.950 3.8 88.5 浮来山济宁438.550 5 88.5438.500 5 88.5438.700 5 88.5147.925 3.8 88.5邹城439.900 5 88.5兖州439.975 5 88.5威海147.950 3.8文登147.900 3.8荣成147.975 3.8 88.5439.650 5 118.8 石岛，测试中滨州438.975 7 88.5邹平438.850 5468.650 5博兴439.000 5 88.5惠民439.150 5439.500 5聊城438.850 5 88.52010.12.30更新。
业余无线电基础知识--1 中继器--它们是什么以及如何使用它们说明书
Repeaters – what are they and how to use themMore hams use frequency-modulated (FM) voice than any other communications mode. Most hams have an FM rig of some type. They use it to keep in touch with their local friends. Hams often pass the time during their morning and evening commute talking on the air. In most communities, amateurs interested in a specialized topic (such as chasing DX) have an FM frequency where they meet regularly to exchange information. At flea markets and conventions, hand-held FM units are in abundance as hams compare notes on the latest bargain.Generally, it's a good idea to use VHF or UHF for all local communications. The HF bands should be reserved for longer-distance contacts to reduce interference on the HF bands.VHF and UHF FM voice operation takes two forms: simplex and repeater. Simplex operation means the stations are talking to each other directly, on the same frequency. This is similar to making a contact on the HF bands.FM voice operation is well-suited to local VHF/UHF radio communication because the audio signal from an FM receiver is not affected by static-type electrical noise. Car engines and ignition systems produce quite a bit of static electrical noise, and many hams like to operate their FM radios while they are driving or riding in a car. (This is called mobile operation.) An AM or SSB receiver is affected much more by static-type electrical noise.The communications range for VHF and UHF FM simplex is usually limited to your local area (5-15 miles). If you live high on a mountain and use a high-gain directional antenna, you may be able to extend your range considerably. Unfortunately, most of us do not have the luxury of ideal VHF/UHF operating conditions. Often, we want to make contacts even though we live in a valley, are driving in a car or are using a low-power, hand-held transceiver.Enter repeaters. A repeater receives a signal and re-transmits it, usually with higher power and from a better location, to provide a greater communications range. Often located atop a tall building or high mountain, VHF and UHF repeaters greatly extend the operating range of amateurs using mobile and hand-held transceivers. If a repeater serves an area, it's not necessary for everyone to live on a hilltop. You only have to be able to hear the repeater's transmitter and reach the repeater's receiver with your transmitted signal.A repeater receives a signal on one frequency and simultaneously retransmits (repeats) it on another frequency. The frequency it receives on is called the input frequency, and the frequency it transmits on is called the output frequency.To use a repeater, you must have a transceiver that can transmit on the repeater's input frequency and receive on the repeater's output frequency. The input and output frequencies are separated by a predetermined amount that is different for each band. This separation is called the offset. For example, the offset on 1.25 meters is 1.6 MHz. A repeater on 1.25 meters might have its input frequency on 222.32 MHz and its output on 223.92 MHz. Repeater frequencies are often specified in terms of the output frequency (the frequency you set your receiver to listen on) and the offset. Your transmitter operates on a frequency that is different from the receive frequency by the offset amount.Most transceivers designed for FM repeater operation are set up for the correct offset. They usually have a switch to change between simplex operation (transmit and receive on the same frequency) and duplex operation (transmit and receive on different frequencies). So, if you wanted to use the repeater in the preceding example, you would switch your transceiver to the duplex mode and dial up 223.92 to listen to the repeater. When you transmit, your rig will automatically switch to 222.32 MHz (1.6 MHz lower in frequency), the repeater input frequency.When you have the correct frequency dialed in, just key your microphone button to transmit through ("access") the repeater. Most repeaters are open -- that is, available for use by anyone in range. Some repeaters, however, have limited access. Their use is restricted to exclusive groups, such as members of a club. Such closed repeaters require the transmission of a continuous subaudible tone or a short "burst" of tones for access. These are called CTCSS (continuous tone-coded squelch system) or PL (Private Line PL is a Motorola trademark) tones. There are also some repeaters available for use by everyone that require the use of special codes or subaudible tones to gain access. The reason for requiring access tones for "open" repeaters is to prevent interference from extraneous transmissions that might accidentally key the repeater. If you wish to join a group that sponsors a closed repeater, contact the repeater control operator.Finding a RepeaterMost communities in the United States are served by repeaters. While the majority of repeaters (over 6000) are on 2 meters, there are more than 1600 repeaters on 222 MHz, more than 5000 on 440 MHz, over 70 on 902 MHz and more than 200 on 1270 MHz. More repeaters are being put into service all the time. Repeater frequencies are selected through consultation with frequency coordinators -- individuals or groups that recommend repeater frequencies based on potential interference and other factors.a comprehensive listing of repeaters throughout the activity, theCertain segments of each band are set aside for FM operation. For example, on 1.25 meters, repeater inputs are found between 222.32 and 223.28 MHz. The corresponding outputs are between 223.92 and 224.98 MHz.Frequencies between 223.42 and 223.9 MHz are set aside for simplex operation. On 23 cm, repeater inputs run between 1270 and 1276 MHz, with corresponding outputs between 1282 and 1288 MHz. Simplex operation is between 1294 and 1295 MHz.Repeater OperatingBefore you make your first FM repeater contact, you should learn some repeater operating techniques. It's worth a few minutes to listen and familiarize yourself with the procedures used by other hams in your area. Accepted procedures can vary slightly from repeater to repeater.Your First TransmissionMaking your first transmission on a repeater is as simple as signing your call. If the repeater is quiet, just say "N1GZO" or "N1GZO listening" -- to attract someone's attention. After you stop transmitting, you will usually hear the unmodulated repeater carrier for a second or two. This squelch tail lets you know that the repeater is working. Someone interested in talking to you will call you after your initial transmission. Some repeaters have specific rules for making yourself heard. In general, however, your call sign is all you need.Don't call CQ to initiate a conversation on a repeater. It takes longer to complete a CQ than to transmit your call sign. (In some areas, a solitary "CQ" is permissible.) Efficient communication is the goal. You are not on HF, trying to attract the attention of someone who is casually tuning across the band. In the FM mode, stations are either monitoring their favorite frequency or not. Except for scanner operation, there is not much tuning across the repeater bands.To join a conversation in progress, transmit your call sign during a break between transmissions. The station that transmits next will usually acknowledge you. Don't use the word "break" to join a conversation --unless you want to use the repeater to help in an emergency. To make a distress call over a repeater, say "break break" and then your call sign to alert all stations to stand by while you deal with the emergency.A further word about emergencies: Regardless of the band, mode or your class of license, FCC Rules specify that, in case of emergency, the normal rules can be suspended. If you hear an emergency call for help, you should do whatever you can to establish contact with the station needing assistance, and immediately pass the information on to the proper authorities. If you are talking with another station and you hear an emergency call for help, stop your QSO immediately and take the emergency call.To call another station when the repeater is not in use, just give both calls. For example, "N1II, this is N1BKE'' If the repeater is in use, but the conversation sounds like it is about to end, wait before calling another station. If the conversation sounds like it is going to continue for a while, however, transmit only your call sign between their transmissions. After you are acknowledged, ask to make a quick call. Usually, the other stations will stand by. Make your call short. If your friend responds, try to meet on another repeater or on a simplex frequency. Otherwise, ask your friend to stand by until the present conversation ends.Use plain language on a repeater. If you want to know someone's location, say "Where are you?" If you want to know whether someone you're talking with is using a mobile rig or a hand-held radio, just ask: "What kind of radio are you using?" You get the idea.Courtesy CountsIf you are in the midst of a conversation and another station transmits his or her call sign between transmissions, the next station in line to transmit should acknowledge the new station and permit the new arrival to make a call or join the conversation. It is impolite not to acknowledge new stations, or to acknowledge them but not let them speak. The calling station may need to use the repeater immediately. He or she may have an emergency to handle, so let him or her make a transmission promptly.A brief pause before you begin each transmission allows other stations to break in -- there could be an emergency. Don't key your microphone as soon as someone else releases theirs. If your exchanges are too quick, you can prevent other stations from getting in.The courtesy tones found on some repeaters prompt users to leave a space between transmissions. The beeper sounds a second or two after each transmission to permit new stations to transmit their call signs in the intervening time. The conversation may continue only after the beeper sounds. If a station is too quick and begins transmitting before the beeper sounds, the repeater may indicate the violation, sometimes by shutting down!Keep transmissions as short as possible, so more people can use the repeater. Again, long transmissions could prevent someone with an emergency from getting the chance to call for help through the repeater. All repeaters encourage short transmissions by "timing out" (shutting down for a few minutes) when someone gets longwinded. The time-out timer also prevents the repeater from transmitting continuously, due to distant signals or interference. Because it has such a wide coverage area, a continuously transmitting repeater could cause unnecessary interference. Continuous operation can also damage the repeater.You must transmit your call sign at the end of a contact and at least every 10 minutes during the course of any communication. You do not have to transmit the call sign of the station to whom you are transmitting.Never transmit without identifying. For example, keying your microphone to turn on the repeater without saying your station call sign is illegal. If you do not want to engage in conversation, but simply want to check if you are able to access a particular repeater, simply say "N1KB testing."Fixed Stations and Prime TimeRepeaters were originally intended to enhance mobile communications. During commuter rush hours, mobile stations still have preference over fixed stations on some repeaters. During mobile prime time, fixed stations should generally yield to mobile stations. When you're operating as a fixed station, don't abandon the repeater completely, though. Monitor the mobiles: your assistance may be needed in an emergency. Use good judgment: Rush hours are not the time to test your radio extensively or to join a net that doesn't deal with the weather, highway conditions or other subjects related to commuting. Third-party communications nets probably should not be conducted on a repeater during prime commuting hours.Simplex OperationAfter you have made a contact on a repeater, move the conversation to a simplex frequency if possible. The repeater is not a soapbox. You may like to listen to yourself, but others, who may need to use the repeater, will not appreciate your tying up the repeater unnecessarily. The easiest way to determine if you are able to communicate with the other station on simplex is to listen to the repeater input frequency. Since this is the frequency the other station uses to transmit to the repeater, if you can hear his signals there, you should be ableto use simplex. If you want to perform an on-the-air test of a pair of hand-held radios, you should select an unoccupied simplex frequency.The function of a repeater is to provide communications between stations that can't otherwise communicate because of terrain, equipment limitations or both. It follows that stations able to communicate without a repeater should not use one. That way, the repeater is available for stations that need it. (Besides, communication on simplex offers a degree of privacy impossible to achieve on a repeater. On simplex you can usually have extensive conversations without interruption.)Select a frequency designated for FM simplex operation. Otherwise, you may interfere with stations operating in other modes without realizing it. (The reason for this is simple: Changing to a simplex frequency is far easier than changing the frequencies a repeater uses.) To see if you and the other station can communicate on a simplex frequency, listen on the repeater input frequency. If you can clearly hear what's going into the repeater, you don't need the repeater to communicate.Common VHF/UHF FM Simplex Frequencies2-Meter Band 146.52* 146.535 146.55146.565 146.58146.595 147.42147.435 147.45147.465 147.48147.495 147.51147.525 147.54147.555 147.57147.5851.25-Meter Band223.42223.44223.46223.48223.50*223.5270-cm Band446.0*33-cm Band906.5*23-cm Band1294.5*1294.0001294.025Every 25 kHz to 1295* National simplex frequencyAutopatch: Use it WiselyAn autopatch allows repeater users to make telephone calls through the repeater. To use most repeater autopatches, you generate the standard telephone company tones to access and dial through the system. The tones are usually generated with a telephone-type tone pad connected to the transceiver. Tone pads are available from equipment manufacturers as standard or optional equipment. They are often mounted on the front of a portable transceiver or on the back of a fixed or mobile transceiver's microphone. Whatever equipment you use, the same autopatch operating procedures apply.There are strict guidelines for autopatch use. The first question you should ask is "Is the call necessary?" If it is an emergency, there is no problem -- just do it! Calling for an ambulance or a tow truck is okay. Otherreasons may fall into a gray area. As a result, some repeater groups expressly forbid autopatch use, except for emergencies.Don't use an autopatch where regular telephone service is available. One example of poor operating practice can be heard most evenings in any metropolitan area. Someone will call home to announce departure from the office. Why not make that call from work before leaving?Never use the autopatch for anything that could be considered business communications. The FCC strictly forbids you to conduct communications in Amateur Radio for your business or for your employer. You may, however, use Amateur Radio to conduct your own personal communications. The rules no longer forbid you to use the autopatch to call your doctor or dentist to make an appointment, or to order food, for example.Don't use an autopatch just to avoid a toll call. Autopatch operation is a privilege granted by the FCC. Abuses of autopatch privileges may lead to their loss for everyone.You have a legitimate reason to use the autopatch? Here's how most systems operate. First, you must access (turn on) the autopatch, usually by pressing a designated key on the tone pad. Ask the other hams on a repeater how to learn the access code. Many clubs provide this information only to club members. When you hear a dial tone, you know that you have successfully accessed the autopatch.Now, simply punch in the telephone number you wish to call.Once a call is established, remember that you are still on the air. Unlike a normal telephone call, only one party at a time may speak. Both you and the other person should use the word "over" to indicate that you are finished talking and expect a reply. Keep the call short. Many repeaters shut off the autopatch after a certain time.Turning off the autopatch is similar to accessing it. A key or combination of keys must be punched to return the repeater to normal operation. Ask the repeater group sponsoring the autopatch for specific information about access and turn-off codes, as well as timer specifics. Don't forget to identify your station. Most groups expect you to give your call sign, the date and time just before accessing the autopatch and just after turning it off.。
业余无线电中继
高效化。
中继器的种类与特点
模拟中继器
模拟中继器采用模拟信号传输方式， 具有电路简单、价格低廉等优点，但
容易受到干扰和信号失真等问题。
时分复用数字中继器
时分复用数字中继器采用时分复用技 术，可以将多个信号合并到一个信道 中进行传输，具有传输容量大、传输
效率高等优点。
数字中继器
数字中继器采用数字信号传输方式， 具有抗干扰能力强、传输质量高等优 点，但电路复杂、价格较高。
随着5G技术的普及，业余无线电中继需要探索如何与5G技术融 合，提供更高效、稳定的通信服务。
安全问题
随着应用领域的拓展，业余无线电中继面临的安全问题也日益突 出，需要加强安全防护措施。
法规监管
业余无线电中继需要遵守相关法规和监管要求，以确保合法、安 全地运营。
THANKS
感谢观看
业余无线电中继
目录
• 业余无线电中继简介 • 业余无线电中继的工作原理 • 业余无线电中继的应用场景 • 业余无线电中继的设备与设置 • 业余无线电中继的法规与操作规范 • 业余无线电中继的发展趋势与展望
01
业余无线电中继简介
中继器的定义
01 中继器
中继器是一种特殊的无线电收发信机，主要用于 将无线电信号从一个地方传输到另一个地方，以 扩展通信距离。
信号的放大与转发
信号的放大
中继器对接收到的信号进行放大，以补偿信号在 传输过程中的衰减，确保接收端能够接收到足够 强度的信号。
信号的转发
中继器将接收到的信号进行转发，以覆盖更广泛 的区域或实现更远距离的通信。
信号的调制与解调
信号的调制
在发送端，信息通过调制过程加载到载波信号上，以便传输。常见的调制方式包括调频（FM） 和调相（PM）。
业余无线电通信.pptx
与手台相比，体积大，价格 高
功能有限，接受性能中等
HF 电台 （ 50０-1５00Ｗ）
全波段电台
接收性能优异 具有多种功能
包含你想要的所有波段 与模式
体积大，价格昂贵
接收性能会发生变化，价格 昂贵
天线
• HF波段天线 • VHF/UHF天线 • 馈线
HF波段天线
定向传播（directional）
业余 无线电通信
Amateur Radio Communication
信息源
发送设备
传输媒质
接收设备
终端装置
波段名称 波长范围 频率范围 频段名称
长波 (LW）
103 ~104 m 30 ~300KHz
低频
（ＬＦ）
主要传播 方式和用途
越洋通信 远距离导航
中波 (MW)
短波 (SW)
超短波 (VSW)
• 13、志不立，天下无可成之事。20.11.2820.11.2811:34:4911:34:49November 28, 2020
• 14、Thank you very much for taking me with you on that splendid outing to London. It was the first time that I had seen the Tower or any of the other famous sights. If I'd gone alone, I couldn, because I wouldn't have known my way about.
。2020年11月28日星期六上午11时34分49秒11:34:4920.11.28
业余无线电入门培训教材ppt课件
电磁波的越距图解
3、国际上和我国业余电台的分区：
国际电信联盟（ITU ）将全世界分为75区，中国属于其中的第42、43、 44区。美国CQ杂志将世界分为40区，中国属于第23、24区。 我国的业余电台分区： 大陆地区为0-9区 1区——北京 2区——黑龙江、辽宁、吉林 3区——天津、河北、内蒙、山西 4区——上海、山东、江苏 5区——浙江、江西、福建 6区——安徽、河南、湖北 7区——湖南、广东、广西、海南 8区——四川、重庆、贵州、云南 9区——陕西、甘肃、宁夏、青海 0区——新疆、西藏
● 极化方式。垂直极化和水平极化
好天线的标准：驻波比越小越好、增益越高越好、特定 条件下方向性越强越好。
（3）VHF/UHF天线架设的基本知识 就架设条件来说：本地通信架得越高越好、在谐振
的前提下天线越长越好。
• 架设要牢固 • 注意施工时的人身安全 • 远离电力线 • 距离障碍物一个波长以上 • 注意防水 • 使用吸盘天线必须有地网 • 注意防雷 3、常用传输线（馈线）：同轴电缆、馈管，选用原则：
呼号的最后一部分是后缀，这才是电台自己特有的“名字”， 我国规定后缀由2~3个字母组成，另外第一个字母还代表同一分 区内不同的省市，要注意区别。
业余电台的性质和操作等级代号一览表
5、业余电台通信用的时间UTC
UTC——世界协调时，是由国际无线电咨询 委员会规定和推荐的，并由国际时间局（BIH） 负责保持的以秒为基础的时间标度，是国际上作 为标准时间、标准频率发播的基础。
短波HF的传播路径有三种，一是直达波，距离和 VU段相同，二是地波，传播稳定，但是距离不远，百 把公里以内，一般军队作战采用。三是天波，通过电离 层和地面之间来回反射弹跳达到全球通信，这是短波的 主要传输方式。
业余无线电中继讲课文档
状态”一定能接收，设置到“哑音接收状 态”时，必须哑音类型一致、同时哑音码 一致才能接收。
现在十三页，总共四十六页。
5、什么是直频？
• 所谓直频，就是两个电台用同一频率通联 的情形。
• 许多火腿为了测试，在有中继的时候不使 用中继，直接使用中继的下行频率即守听 频率进行通连。
• 以上两款机型的操作 步骤完全相同。
现在二十八页，总共四十六页。
泉盛大金刚对讲机操作面板
现在二十九页，总共四十六页。
一、设置全频（频率模式）
• 按功能键F，再按数字键1 （记为F+1，下同），或按 F+6，重复，直到对讲机工作
模式调整为VFO全频（频率 模式）。
• F+1/F+6不能同时使用
• F+1功能选项：
中继守听
中继接收/转发
现在二十六页，总共四十六页。
对讲机设置
• 上行（发射）频率：430.885MHz
• 下行（接收）频率：435.885MHz
• 哑音：82.5 • 步进：12.5
现在二十七页，总共四十六页。
泉盛对讲机中继配置方法
• 适用机型：
– 泉盛大金刚TG-K4AT
– 泉盛超级大金刚TGK10AT
采用的是“接收哑音”，没有哑音的信号 被排斥。 • 中继下来的信号，可以不带哑音。
现在十页，总共四十六页。
• 对讲机接收时，为了不接收自己不需要听 的信号，可以加上接收哑音。
• 两个电台（或几个电台）之间可以使用约 定的哑音，用于排除外来干扰信号。
• 哑音事实上有时可以听到，尤其是把哑音 设置在高限（250Hz）附近时，或者接收机 的低频音效较好时。因此，设置哑音时， 应尽量设置低一些，以免干扰。
江苏省业余无线电中继频率表
江苏省业余无线电中继频次表南京米中继城市名称上行频次下行频次模拟亚音备注沛县沛县 0.7 米中继434.860 MHz沛县米中继 (2)张家港张家港 2 米中继88.5 Hz镇江镇江 0.7 米直频镇江 0.7 米中继镇江 2 米直频宜兴宜兴米中继盐城盐城米中继扬州扬州 0.7 米直频扬州 0.7 米直频（ 2）扬州米中继扬州 0.7 米中继（ 2）扬州 2 米中继扬中扬中米中继无锡无锡 2 米中继太仓太仓米中继泰州泰州 2 米中继宿迁宿迁 0.7 米中继宿迁 2 米中继射阳射阳 0.7 米中继苏州苏州米中继苏州 2 米直频如皋如皋 2 米中继徐州徐州 0.7 米中继徐州 2 米中继沛县 0.7 米中继连云港连云港 0.7 米中继东海 0.7 米中继昆山昆山米中继昆山 2 米中继江阴江阴 2 米中继建湖建湖米中继建湖 2 米中继淮安淮安米中继海门海门米中继东台东台米中继丹阳丹阳 0.7 米中继丹阳 2 米直频大丰大丰 0.7 中继楚州楚州 2 米中继常州常州 0.7 米中继常州 2 米中继常熟常熟 0.7 米中继433.050 MHz宝应宝应 0.7 米中继宝应 2 米中继南通南通 0.7 米直频南通米直频（ 2）南通 0.7 米中继南通 2 米中继泗洪泗洪 0.7 米中继MHz MHzMHz MHzMHz MHz安徽省中继频次表城市名称上行频次下行频次模拟亚音备注界首界首米中继淮北淮北 0.7 米中继淮南淮南 0.7 米中继黄山黄山米中继合肥合肥米中继合肥 0.7 米中继（ 2）合肥 2 米中继颖上颍上 0.7 米中继430.175 MHz阜阳阜阳 0.7 米中继阜阳 2 米中继凤台凤台米中继滁州滁州米中继蚌埠蚌埠米中继蚌埠 2 米中继潘集米中继亳州亳州米中继亳州 2 米中继宿州宿州米中继泾县泾县米中继六安六安米中继MHz MHz HzMHz MHz HzMHz MHz HzMHz MHz Hz浙江省中继频次表城市名称上行频次下行频次模拟亚音备注杭州杭州 2 米中继88.5 Hz杭州 6 米中继嘉兴嘉兴米中继嘉兴 2 米中继海宁海宁 2 米中继海盐海盐米中继海盐米中继（ 2）宁波宁波米中继宁波 2 米中继平湖平湖 0.7 米中继义乌义乌 0.7 中继义乌 2 米中继义乌 2 米直频永康永康 0.7 米直频余姚余姚米中继桐乡桐乡米中继温州温州 2 米中继绍兴绍兴米中继松阳松阳 2 米中继乐清乐清 2 米中继临安临安 0.7 米直频临安 2 米中继上海市中继频次表城市名称上行频次下行频次模拟亚音备注上海上海 0.7 米中继上海 0.7 米中继（ 2）上海松江0.7 米中继上海崇明0.7 米中继上海 0.7 米直频上海 2 米直频MHz MHzMHz MHzMHz MHzMHz MHzMHz MHzMHz MHzMHz MHz山东省中继频次表城市名称上行频次下行频次模拟亚音备注济南济南米中继济南 0.7 米中继（ 2）济南 0.7 米中继（ 3）邹城邹城米中继淄博淄博 0.7 米中继淄博 0.7 米中继（ 2）济宁济宁米中继济宁 2 米中继桓台桓台米中继桓台 2 米中继东营东营 0.7 米中继东营 0.7 米中继（ 2）东营 0.7 米中继（ 3）东营 2 米中继东营河口 0.7 米中继德州德州米中继昌邑昌邑 0.7 米中继滨州滨州邹平县0.7 米中继邹平县 0.7 米中继（ 2）莒县莒县米中继莒县浮来 0.7 米中继莒县浮来 2 米中继枣庄枣庄 0.7 米中继枣庄 0.7 米中继（ 2）烟台烟台 2 米中继威海威海 2 米中继潍坊潍坊 0.7 米中继潍坊临胊县0.7 米中继潍坊滨海 0.7 米中继秦城秦城 0.7 米中继434.850 MHz439.850 MHz泰安泰安 0.7 米中继泰安 2 米中继滕州滕州米中继88.5 Hz寿光寿光米中继新泰新泰 0.7 米中继新泰 0.7 米中继（ 2）青岛青岛米中继青岛 2 米直频青岛 SH 俱乐部中继青岛城阳0.7 米中继城市名称上行频次下行频次模拟亚音备注青州青州 0.7 米中继青州 2 米直频青州 2 米中继莱阳莱阳 0.7 米中继莱芜 0.7 米中继龙口龙口 0.7 米中继临沂临沂米中继临沂 BY4LY 2 米中继临沂阳光户外俱乐部。