Regio Midi - 具有通信功能的预编程室内控制器

R E G I ORegio room controllers Flexible systems for room control at all levelsRegio is a range of room controllers for heating, ventilation, air conditioning and corresponding functions.Optimal flexibilityRegio covers every need – from control of heating, cooling and ventilation to functions such as lighting, humidity, CO 2 monitoring and blinds. Available in three different series, Regio also offers full system level flexibility. Regio en-ables you to create anything from a stand-alone system for managing the functions in a single room to large integrated SCADA systems.Regio also offers web and Internet solutions, giving every employee individual control of the climate in his or her room using a PC connec-ted to the office network.Regio is the ultimate solution in offices, schools, hotels, as well as in all buildings where opti-mal comfort and a low energy consumption is required without making costly investments.Zone control on every level...Regio MiniThe simple solution for stand-aloneRegio MidiA complete solution with built-in communicationRegio MaxiFreely programmable with communication and web interfacebrowserRegio has a modern design and a subtle elegan-ce that enhances many indoor environments.Applications• Chilled ceilings, chilled beams and radiators • Fan-coil systems • V A V systems• Control and monitoring of room temperature, air control and humidity, as well as control of lighting and blinds. Key features• Stand-alone or integrated in a web-basedsystem• Heating/cooling or both• Communication via RS485 (Modbus, BAC-net or EXOline), TCP/IP or LON• Quick and easy configuration using the soft-ware Regio tool ©• Comprehensive program of supplementary products...with stylish designRegio has been developed in accordance to ourReady-Steady-Go concept, simplifying every step from installation to management. Regio Midi and Maxi are configured using Regio tool ©, downloadable free of charge from www.regin.se.Regio MiniPre-programmed, stand-alone room controllersThe stand-alone version, Regio Mini, is de-signed for control of heating and cooling in a single room. The series consists of different room controllers, as well as a relay box for fan control. The relay box is mounted on a ceiling, inside of a fan-coil unit or similar.The controllers are pre-programmed to handle different functions, but can easily be configured by using the buttons and the display.The controllers have a built in temperature sensor but an external sensor can also be con-nected, together with a window contact.RC-DO -Display-Comfort temp. and forcingRC-DFO -Display-Comfort temp. and forcingRoom controllers for heating and coolingRoom controllers for fan-coil unitsRCBasic modelRC-FBasic modelRC-FO-Comfort temp. and forcingRC-O- Comfort temp. and forcingRC-TBasic modelRC-DTO -Display-Comfort temp. and forcingRC-TO-Comfort temp. and forcingRoom controllers with 3-position outputRC-H -Hidden setpointRegio MidiPre-programmed room controllers with communicationRegio Midi has all the functions of the stand-alone version, but also supports communica-tion. Controllers located in different rooms can be connected to bus lines, such as Modbus, EXOline or BACnet in order to communicate with a central SCADA system.The room controllers are pre-programmed, but can be customised for specific applications using the software Regio tool ©.RC-C3O-Comfort temp. and forcingRC-CF Basic modelRC-CFO-Comfort temp. and forcingRoom controllers for heating, cooling and EC fan control, with 3 universal outputsRoom controllers for fan-coil unitssensorRC-C3DOC -Display-Comfort temp. and forcingRC-C3Basic modelRC-C3H -Hidden setpoint RC-CDFO -Display-Comfort temp. and forcingRC-C3DFOC -Display-Comfort temp. and forcing-EC fan control -3 universal outputsRC-CT Basic modelRC-CDTO -Display-Comfort temp. and forcingRC-CTO-Comfort temp. and forcingRoom controllers with 3-position outputRC-CTH -Hidden setpoint RC-C3DOC, RC-C3DFOC, RC-CDFO and RC-CDTO are BTL-approvedRegio MaxiFreely programmable room controllers withweb interfaceThe freely programmable room controller(RCP) handles all functions in a system. Thecontroller is pre-programmed but can be con-figured using our software tool.Various roomunits with built-in temperature sensors areconnected to the room controller. The systemcan be connected to standardised bus systems,such as LON, Modbus or EXOline using com-munication via TCP/IP alt. RS485 for integra-tion into a SCADA system.This solution enables accessing the system viaa PC with Internet Explorer. In this case, noroom units are needed. Instead, all functionscan be handled directly from the PC, makingthe system highly cost-effective. Anotheradvantage is the possibility to set conditions ineach room using the PC.Room controllers for heating and coolingroom controllerRU-DOS-Display-Comfort temp.and forcing-Lighting, CO2,humidity, blinds-Fan controlRU-DO-Display-Comfort temp.and forcingRU-DFO-Display-Comfort temp.and forcingRoom unitmulti functionsRoom controllers for fan-coil unitsRU-FBasic modelRU-FO-Comfort temp.and forcingRUBasic modelRU-O-Comfort temp.and forcingEXOopc DriverEXOopc Driver, based on an open standard,makes it possible to connect Regio room con-trollers to SCADA systems of different brands.EXOopc Driver supports all media types forcommunicating with the zone system.Line splittersWhen multiple Regio systems in differentzones/rooms are integrated in a comprehensiveSCADA system, many communication linesare needed to achieve efficient and manageablecommunication. In cases like these, Regin’sEXOline 485-TCP/IP line splitter should beused.Valves, actuators and sensorsRegin has one of the most extensive ranges ofzone control products in the business. Manyof these are based on our concept of Ready-Steady-Go, greatly simplifying installation andcommissioning.Everything from web based zone systems down to the smallest sensorWeb-based systemsOur web-based solutions, based on the freelyprogrammable room controller, provides accessto the zone system via a PC with a web brow-ser (Internet Explorer). All parameters can beread and setpoints changed using the graphicinterface. Using this solution, no room units arerequired, thereby simplifying the installationand reducing investment costs.EXOscadaEXOscada is a Windows-based SCADA pro-gram for building automation. EXOscada ena-bles quick and easy creation of a system suitingyour every need. All software needed to createa Regio system is included.B R – R E G I O –E N 2013-07R E G I N – T H E C H A L L E N G E R I N B U I L D I N G A U T O M A T I O N。