英搏尔_CH4200系列高效智能充电机
CH4100车载充电机
红 --红黄绿绿灯长亮 绿灯 （ 3s ） 黄灯 （ 0.3s ） 红 - 绿 --红 - 绿 - 黄 --红 - 绿 - 黄 - 黄 --红 - 绿 - 黄 - 黄 - 黄 --红 - 绿 - 黄 - 黄 - 黄 - 黄 --红 - 绿 - 黄 - 黄 - 黄 - 黄 - 黄 --红 - 绿 - 黄 - 黄 - 黄 - 黄 - 黄 - 黄 --红 - 绿 - 黄 - 黄 - 黄 - 黄 - 黄 - 黄 - 黄 --红 - 绿 - 黄 - 黄 - 黄 - 黄 - 黄 - 黄 - 黄 - 黄 --红-黄---
单 位 ： mm
充电机使用注意事项： 1.充电机线束需要折弯时，折弯处距机壳的长度应不小于图示的50毫米。 2.安装充电机时应该注意，充电机不要装在密闭不透风的空间内，以免影响其散热。 风扇上方50mm内空间内不能有遮挡物，导致充电机散热通道不畅。 3.请定期清理充电机散热齿和风扇上的灰尘，以免影响充电机散热。 4.如果所购产品用于铅酸电池充电，请客户下单时注明电池类型及容量。免维护电池 提供C3容量，加液提供C5容量。如果因客户提供电池信息不准确，而造成电池充不 满或充坏，我司概不负责。
232,00 210,00
160 ± 5
80 135
A向视 图 指示 灯： DJ7031Y-2.3-21
DJ7043-2-21 铅酸 电池： 参数修 改 磷酸铁锂 电池： CAN 通讯
1000±2
单位： mm
温度传感器
DJ7021-1.5-21
50 60
温度传感器： DJ7021-1.5-21 禁行开关 ： DJ7021-2-11
1500±5
外 接 指示 灯延长 线
DJ7031Y-2.3-21
300 ± 10
南天自助终端产品手册
南天自助终端产品手册2014年南天自助产品中心产品部2014年4月目录1传统自助终端.....................................................大堂式多功能自助终端......................................Nantian BST-4200/C20..................................Nantian BST-5200 A20..................................穿墙式多功能自助终端......................................Nantian BST-4230/C21..................................壁挂式多功能自助终端......................................Nantian BST-3340/C22.................................. 2自助发卡机.......................................................大堂式发卡机..............................................Nantian BST-5200 B20..................................台式发卡机................................................Nantian BST-3340 H10.................................. 3自助回单机.......................................................大堂式自助回单机..........................................Nantian BST-5810A..................................... 4排队机...........................................................大堂式排队机..............................................Nantian BST-5200/E10.................................. 5其他.............................................................网银终端..................................................Nantian BST-4200/G20..................................预填单机..................................................Nantian BST-5200/B10..................................智能服务终端..............................................Nantian BST-4210 A24..................................存折补登机................................................Nantian BST-1100......................................1传统自助终端1.1大堂式多功能自助终端1.1.1N antian BST-4200/C201.1.1.1效果图1.1.1.2结构尺寸图1.1.1.3功能特点外形新颖：整机采用流线型设计；全注塑面板，美观大方；整机色调协调统一；全功能配置：支持存折补登、银行卡查询及转账等多种传统业务功能的同时，能够播放多媒体广告信息，并支持凭条/账单/发票等多种票据的自助打印功能；可扩展型强：支持激光打印机、发票打印机、条码扫描、非接触式IC卡等多种模块扩展功能；强大的卡业务处理功能：支持磁卡、IC、非接触式IC卡等多种卡片的读写功能；数据安全性高：采用硬件加密键盘；配备读卡器异型卡口及密码键盘防窥式设计，大大提高了用户个人信息的安全性；1.1.1.4标准配置1.1.1.5可扩展配置1.1.2N antian BST-5200 A201.1.2.1效果图1.1.2.2结构尺寸图1.1.2.3功能特点外形新颖：整机采用流线型设计；全注塑面板，美观大方；整机色调协调统一；全功能配置：支持存折补登、银行卡查询及转账等多种传统业务功能的同时，能够播放多媒体广告信息，并支持凭条/账单/发票等多种票据的自助打印功能；可扩展型强：支持激光打印机、发票打印机、条码扫描、非接触式IC卡等多种模块扩展功能；强大的卡业务处理功能：支持磁卡、IC、非接触式IC卡等多种卡片的读写功能；数据安全性高：采用硬件加密键盘；配备读卡器异型卡口及密码键盘防窥式设计，大大提高了用户个人信息的安全性；1.1.2.4标准配置1.1.2.5可扩展配置1.2穿墙式多功能自助终端1.2.1N antian BST-4230/C211.2.1.1效果图1.2.1.2安装尺寸图1.2.1.3功能特点户外穿墙式应用设计：高附着力，防酸碱腐蚀户外型塑粉喷塑；防水、防尘、防暴；超强的高低温适应能力；功能布局合理：引用ATM 导轨式拉出设计，前面框及各模块可拉出进行维护，方便、快捷；全功能配置：支持存折补登、银行卡查询及转账等多种传统业务功能的同时，能够播放多媒体广告信息，并支持凭条/账单/发票等多种票据的自助打印功能；可扩展型强：支持激光打印机、发票打印机、条码扫描、非接触式IC卡等多种模块扩展功能；数据安全性高：采用硬件加密键盘；配备读卡器异型卡口及密码键盘防窥罩，大大提高了用户个人信息的安全性；智能电源管理：掉电监控、掉电保护、自动维护、自动关机；1.2.1.4标准配置1.2.1.5可扩展配置1.3壁挂式多功能自助终端1.3.1N antian BST-3340/C221.3.1.1效果图1.3.1.2安装尺寸图1.3.1.3功能特点壁挂式设计：不受安装空间限制，可做离行式设备使用；强大的卡业务处理功能：支持磁卡、IC、非接触式IC卡等多种卡片的读写功能；多种扩展功能：条码扫描、非接触式IC卡、发票打印机、GPRS或CDMA无线通信模块；机身色彩个性化定制：机身颜色可根据用户需求进行个性化定制；数据安全：EPP硬件加密键盘，采用凹陷型设计，设计时充分考虑了用户信息安全性；1.3.1.4标准配置1.3.1.5可扩展配置2自助发卡机2.1大堂式发卡机2.1.1N antian BST-5200 B202.1.1.1效果图2.1.1.2安装尺寸图2.1.1.3功能特点先进的自助发卡模块，保障自助发卡的可靠性和安全性。
维克顿能源蓝牙智能充电器产品介绍说明书
Victron Energy B.V. | De Paal 35 | 1351 JG Almere | The Netherlands General phone: +31 (0)36 535 97 00 | E-mail: *********************** One of the historyscreensGraph screenBluetooth SmartThe wireless solution to monitor voltage and current, to change settings and to update the charger when new features become available.High efficiencyWith up to 94 % efficiency, these chargers generate up to four times less heat when compared to the industry standard.And once the battery is fully charged, power consumption reduces to 0,5 Watt, some five to ten times better than the industry standard.Adaptive 6-stage charge algorithm: test - bulk – absorption - recondition – float – storageThe Blue Smart Charger features a microprocessor controlled ‘adaptive’ battery management. The adaptive feature will automatically optimize the charging process relative to the way the battery is being used.Fully programmable charge algorithmAbsorption, Float and Storage voltages as well as the Recondition setting and the temperature compensation value can be programmed with the Bluetooth app.After enabling the Expert mode, the app allows changing practically all parameters and time limits used by the charge algorithm.Storage Mode: less maintenance and aging when the battery is not in useThe storage mode kicks in whenever the battery has not been subjected to discharge for 24 hours. In the storage mode float voltage is reduced to 2,2 V/cell (13,2 V for a 12 V battery) to minimize gassing and corrosion of thepositive plates. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulfation, which are major causes of early battery failure.Also charges Li-ion batteriesLi-ion batteries are charged with a simple bulk – absorption – float algorithm.Fully discharged battery recovery functionWill initiate charging even if the battery has been discharged to zero volts.Will reconnect to a fully discharged Li-ion battery with internal disconnect function.NIGHT and LOW settingWhen in NIGHT or LOW mode, the output current is reduced to max. 50 % of the nominal output and the charger will be totally noiseless. The NIGHT mode automatically ends after 8 hours. The LOW mode can be ended manually.Protected against overheatingOutput current will reduce as temperature increases up to 50 °C, but the Blue Smart Charger will not fail.Eleven LEDs for status indicationCharge algorithm: TEST / BULK / ABSORPTION / RECONDITION / FLOAT / STORAGE / READY. MODE button to set: NORMAL (14,4 V) / HIGH (14,7 V) / RECONDITION / LI-ION.Forty cycle history logThe history screen contains historical usage data over the charger’s lifetime and detailed statistics for the last 40 charge cycles.VE.Smart NetworkingThe VE.Smart Network is a wireless device to device (D2D) communication network between Victron products, using Bluetooth Smart.Optional battery voltage and temperature compensation, and current sensingThe VE.Smart Network opens the possibility to optimize the charge process: a Smart Battery Sense, Smart Battery Monitor or a SmartShunt can be used to communicate battery voltage and temperature to one or more battery chargers. A Smart Battery Monitor or SmartShunt will also communicate battery current.Synchronized parallel chargingSynchronize up to ten battery chargers in a VE.Smart network to make them charge a battery as if they were one large charger. The chargers will synchronize the charge algorithm between them. They will simultaneously switch from one charge state to another, for example from bulk to absorption. Synchronized parallel charging has several interesting advantages:- Redundancy: if one charger stops for whatever reason, the other chargers will continue to operate. - Flexibility: simply add a charger to the network if more current is needed.- Cost: several low power chargers will in general cost less than one high power charger. - Installation: several low power chargers may be easier to fit in a confined space.Blue Smart IP22 12/30 (3)Victron Energy B.V. | De Paal 35 | 1351 JG Almere | The NetherlandsGeneral phone: +31 (0)36 535 97 00 | E-mail: ***********************Input voltage range180 – 265 VAC 180 – 265 VAC Charge current, normal mode 15 / 20 / 30 A 8/12/16 A Charge current, NIGHT or LOW 7,5 / 10 / 15 A4 / 6 / 8 A Efficiency93 % 94 % No load power consumption 0.5 W 0.5 W Frequency45 – 65 Hz 45 – 65 HzNumber of outputs1 3 1 3Charge voltage 'absorption' Normal: 14,4 V High: 14,7 V Li-ion: 14,2 V Normal: 28,8 V High: 29,4 V Li-ion: 28,4 V Charge voltage 'float' Normal: 13,8 V High: 13,8 V Li-ion: 13,5 V Normal: 27,6 V High: 27,6 V Li-ion: 27,0 V Charge voltage 'storage' Normal: 13,2 V High: 13,2 V Li-ion: 13,5 V Normal: 26,4 V High: 26,4 V Li-ion: 27,0 VCharge algorithm6-stage adaptiveCan be used as power supply YesProtectionBattery reverse polarity (fuse) Output short circuit Over temperatureOperating temp. range -40 to +60 °C (full rated output up to 40 °C)Humidity (non-condensing) Max 98 %Material & Colour Aluminium (blue RAL 5012) Battery connection Screw terminals 16 mm² / AWG6230 VAC connection Cable of 1,5 meter with CEE 7/7 plug, BS 1363 plug (UK) or AS/NZS 3112 plug (AU/NZ)Protection category IP22 Weight1,3 kgDimensions (h x w x d) 235 x 108 x 65 mmSafety EN 60335-1, EN 60335-2-29Emission EN 55014-1, EN 61000-6-3, EN 61000-3-2Immunity EN 55014-2, EN 61000-6-1, EN 61000-6-2, EN 61000-3-3AutomotiveECE R10-5Notes1. The VE.Smart Network feature is enabled on all IP22 chargers with serial number HQ2024xxxxx and later.2. Models with different current ratings can be paralleled and synchronized.。
汉匀HYC02超级充电器说明书
三、不同电压等级电池的充电进程
1、36V电池组
36V电池，正常的上排数码管会显示33-41V之间的电压，下排会识别显示出36V，过8秒后，充电会自动进行，散热风扇全速运行，超过浮充电压，会进行自动减流，符合转灯条件后，电压会自动下降到浮充电压附近，风扇进入长停短转状态，最后阶段会在浮充电压附近进行慢脉冲去硫。（过充电的36V电池会有可能进入48V区间，如果发现识别的电池等级出错，请按“电池电压”键进行手动操作，选择36V电压后，再按“启动”键进入充电进程，此时，第二排第一位会显示“C”。）
3、60V电池组
60V电池，正常的上排数码管会显示55-69V之间的电压，下排会识别显示出60V，由于60V电池组与相邻电池等级重叠区太多，无法自动正确识别电压等级，必须进行手动选择电压等级，然后按下启动键确认，进入充电进程后，散热风扇全速运行，超过浮充电压，会进行自动减流，符合转灯条件后，电压会自动下降到浮充电压附近，风扇进入长停短转状态，最后阶段会在浮充电压附近进行慢脉冲去硫。（按下“电池电压”键进行手动操作，选择60V电压后，再按“启动”键进入充电进程，此时，第二排第一位会显示“C”。）
*******************************************************************************
汉匀超级充电器
使用详解
一、正确连接输入输出
1、请先将输出插头接入电动车上的电池插座
2、然后将输入插头接入民用电插座
说明：如果先上市电，充电器输出端会建立输出电压，此电压与电池电压有差距，在接通电池插座瞬间，会在插头和插座间形成接触打火。
武汉百楚合锐赛尔NSA3100HF_v2[1].0
![武汉百楚合锐赛尔NSA3100HF_v2[1].0](https://img.taocdn.com/s3/m/0b172515cc175527072208fd.png)
NACO
NSA3100HF 配网自动化馈线终端
◆ 附带功能强大的调试维护软件，实现丰富的测量、记录、监视、控制等功能，支持各
种历史数据的查询和导出功能；
◆ 完善的保护功能，根据定值可适应电流型、电压型开关。
2
NACO
2 技术参数
2.1 机械及环境参数 2.1.1 工作环境
◆ 温度：-40℃ - +70℃ 保证正常工作 ◆ 环境温度最大变化率：1℃/min ◆ 湿度：5% - 100% ◆ 最大绝对湿度：35g/m3 ◆ 大气压力：70 – 106Kpa
NSA3100HF 配网自动化馈线终端
2.1.2 机械性能 ◆ 机箱防护性能：防护等级不低于 GB/T4208 规定的 IP43 及要求； ◆ 工业级产品：宽温度范围（-40 - +70），防磁、反震、防潮、防雷、防尘、防腐蚀； ◆ 壁挂式或柜式安装，扩展方便。
2.2 电气参数 2.2.1 额定数U 技术使用说明书
南京电研电力自动化股份有限公司
版本声明 本说明书适用于 NSA3100HF 配网远方终端装置 V2.0 版本
南京电研电力自动化股份有限公司 南京高新技术开发区柳州北路 29 号 邮政编码：210031 联系电话：02558741699 网 址：
* 本说明书可能被修改，请注意核对实际产品与说明书的版本是否相符 * 2012 年 3 月第二版第一次印刷
目录 1 概 述.................................................................... - 1 1.1 应用范围 ................................................................... - 1 1.2 主要功能 ................................................................... - 1 1.3 硬件结构 ................................................................... - 1 1.4 主要特点 ................................................................... - 1 2 技术参数 ................................................................. - 3 2.1 机械及环境参数 ............................................................. - 3 2.2 电气参数 ................................................................... - 3 2.3 主要技术指标 ............................................................... - 3 2.4 电磁兼容 ................................................................... - 4 2.5 绝缘试验 ................................................................... - 4 3 功能介绍 ................................................................. - 5 3.1 遥信、遥测、遥控功能 ....................................................... - 5 3.2 参数设置 ................................................................... - 5 3.3 装置自检 ................................................................... - 5 3.4 电源失电保护 ............................................................... - 5 3.5 对时功能 ................................................................... - 5 3.6 SOE 记录存储及上送功能...................................................... - 5 3.7 遥测越限检测及判别功能 ..................................................... - 5 3.8 馈线停电自动上传数据功能 ................................................... - 5 3.9 通信功能 ................................................................... - 5 3.10 当地调试功能 .............................................................. - 5 3.11 输入输出回路安全防护功能 .................................................. - 6 3.12 保护功能 .................................................................. - 6 4 参数及整定说明............................................................ - 7 4.1 装置参数 ................................................................... - 7 4.2 保护定值 ................................................................... - 7 4.3 交流精度调整 ............................................................... - 8 5 装置使用说明 ............................................................ - 10 5.1 装置面板显示说明 .......................................................... - 10 5.2 装置配置说明 .............................................................. - 10 5.3 配置软件使用说明 .......................................................... - 14 5.4 调试维护软件使用说明 ...................................................... - 20 6 用户调试大纲 ............................................................ - 27 6.1 操作流程 .................................................................. - 27 6.2 使用和维护 ................................................................ - 27 附图 1：装置前面板图 ....................................................... - 29 附图 2：装置端子示意图 ..................................................... - 30 -
1.5KW-8KW锂电车载充电机
型号Models净重N.W.：6.33KG尺寸Size (mm)：348(L) × 180(W) × 140(H)注：锂电池充电机的型号是根据充电机能输出的实际最高电压和电流来标注的。
Note: Model of the Lithium battery charger will be marked in response to the actual maximum output voltage. .高频PFC 2KW 锂电池充电机 2KW HF/PFC Lithium Battery Charger型号Models净重N.W.：7.07KG尺寸Size (mm)：349(L) × 198(W) × 139(H)注：锂电池充电机的型号是根据充电机能输出的实际最高电压来标注的。
Note: Model of the Lithium battery charger will be marked in response to the actual maximum output voltage.锂电池充电机 Lithium Battery Charger 输出电压最大值 Vout Max 输出电流最大值Iout MaxTCCH-H35-40 34.6V 40A TCCH-H51-33 51.1V 33A TCCH-H65-25 65V 25A TCCH-H90-20 89.8V 20A TCCH-H104-16 104V 16A TCCH-H114-14 114V14A TCCH-H130-12 130V 12A TCCH-H161-10 161V 10ATCCH-H203-08 203V 8A TCCH-H217-08 217V 8A TCCH-H258-6A2 258V 6.2A TCCH-H320-05 320V 5A锂电池充电机 Lithium Battery Charger 输出电压最大值 Vout Max 输出电流最大值Iout MaxTCCH-H66-35 66V 35A TCCH-H83-30 82.6V 30A TCCH-H96-25 96.2V 25A TCCH-H112-21 112V 21A TCCH-H130-18 130V 18A TCCH-H145-16 144.7V 16A TCCH-H168-15 168V 15A TCCH-H192-12 192V 12A TCCH-H208-11 208V 11A TCCH-H234-10 233.3V 10A TCCH-H243-09 243V 9A TCCH-H258-09 258V 9A TCCH-H290-08 289.5V 8A TCCH-H337-7A2 337V 7.2 TCCH-H389-06 389V 6A TCCH-H417-5A5 417V 5.5A型号Models净重N.W.：10.24KG尺寸size (mm)：257(L) × 254(W) × 179(H)注：锂电池充电机的型号是根据充电机能输出的实际最高电压来标注的。
AcuRev 2000 series Brochure (2010C1103)
产品简介
AcuRev 2000系列产品集成了多达18路单相（或6路三相）的电能计量、 参数测量和电能质量监测功能，是Accuenergy公司面向下一代智能配电 网开发的先进智能电表。具有集中安装、分户计量、一户一表、循环显 示、防止窃电等特点，非常适合大型商业设施、公寓宿舍、工业企业以 及住宅。产品具备红外通讯口、RS485通讯接口和以太网接口，可以便捷 地接入智能配电监控系统，产品还有丰富的 IO 接口，支持水、气表的脉 冲输入，非常适合综合能源管理系统使用。产品安装方便、接线方式灵 活，既适合新建设施的配电计量，也可用于已有配电系统改造。
ZKK
75 V3
73 V1
74 V2
E 4
C 5
76 VN
RS485
AcuRev 2000
网线
需量 周期 E C 6 7
有功 有功 脉冲C1 脉冲2 E C E C 8 9 10 11
显示模 块接口 DISP
秒脉冲
数字量输入（选配） 数字量输出（选配） V- DI1 DI2 DI3 DI4 DI5 DI6 DI7 DI8 V+ RO11 RO12 RO21 RO22 RO31 RO32 RO41 RO42 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 辅助电源
数据存储与负荷趋势
拥有4Mbyte的非易失性存储器，可存储带时标的实时测量参数、需量以及 电能计量，用户籍此存储数据，可准确描绘电力参数和负荷能耗趋势图。
丰富的IO接口
丰富的IO接口方便系统的增值应用：DI输入支持脉冲计数，支持水、电、 气表数据接入、开关状态监视、需量同步输入、继电器远程控制、电能 脉冲输出。
迪菲菲 BS2 可同时充电双通道锂离子电池充电器用户手册说明书
BS2 Portable simultaneous li-ion batterychargerUser ManualWE STRONGLY RECOMMEND THAT YOUREAD THIS INSTRUCTION BEFORE USINGYOUR BEBOB BS2 CHARGER! PLEASEKEEP THIS MANUAL FOR FUTUREREFERENCEFeatures• 2 Channel B-Mount simultaneous Li-Ion Charger.•Built-in AC Adapter. 16,5V – 5.0A DC XLR4 Output•14,4V Powerbase Mode.Charging•Never leave batteries unattended while charging•All Channel Status indicator show green when the charger is turned on with no battery connected•The Channel Status indicator turns red when a battery is placed on the corresponding channel and the charging process has begun•The Channel Status indicator turns back green when the battery is fully charged•The Channel Status indicator turns Yellow when a battery is placed on the corresponding channel and the charging process fails for damage or safety reason.•Cooling fan will be activated during the charging processAC Adapter•You can use your BS2 either as an AC Adapter or as a charger. Both functions aren´t possible simultaneously•The charging functions always has priority•The AC adapter delivers up to 5,0A under 16,5VPowerbase•Plug off the AC Cord from the charger•Place one or two full batteries on the charger•Battery Power will be available over the XLR 4 DC Output.•Maximum Load depends on the batteriesSafety instructions•Only for professional use! Keep Charger out of reach of children and personnel that has not been instructed in the use!•Use only with recommended batteries.•Keep the charger dry and do not immerse in water.•Do not cover the charger under use• A standard three-pin AC plug must be used and earth pole must be connected to the earth line.•Do not keep in contact with any part of the body while the charger is in working status.•Do not use or store the charger in unstable, dusty or damp environments.•Remove the battery from the charger after the charging process is complete.•Do not attempt to open or repair the charger. Contact your dealer for help if it becomes defective.•Handle with care! Do not throw! Do not drop!Warranty•The BS2 is covered by a 2 years unconditional warranty on all parts.•For warranty issues or if you have any additional questions, please contact the appropriate bebob distributor listed at www.bebob.de.SpecificationsModel BS2Mount B-MountChannel 2 simultaneousCharging current 16,8V 2.5ADC Output 16.5V 5.0ADC Port XLR4 1 minus 4 plusAC In 90-264V/47-63Hz 100WWeight 1,0 KgDimensions (WXHXD) 110 x 231x 141mmBatteries bebob, idx, sonyCharging time (bebob VS2/VS4) depends on the battery capacityOperating Temp. Range - 10°C ~ + 35°C。