最新国际贸易合同完整英文
英语版国际贸易合同5篇
英语版国际贸易合同5篇篇1International Trade ContractThis contract is made on [Date] between [Company Name 1, Country 1] and [Company Name 2, Country 2], hereinafter referred to as the “Seller” and the “Buyer” respectively.1. Contract Commodity and SpecificationThe Seller agrees to sell and the Buyer agrees to purchase the following commodity: [Describe the product in detail, including name, quantity, specifications, and other necessary information].2. Terms of DeliveryDelivery shall be made on or before [Date of Delivery] from the port of [Port of Origin] to the port of [Port of Destination]. Any delay shall be notified to the Buyer by the Seller in writing at least [Number of Days] days prior to the agreed date of delivery.3. Price and PaymentThe total price for the contracted commodity shall be [Total Price in Currency]. The Buyer shall make payment within [Payment Term] upon receipt of the invoice from the Seller.4. Quality and Inspection5. Insurance and Risk Transfer6. Delay and Force Majeure7. Warranty and Claims8. Contract Amendment and TerminationThis contract may be modified or terminated only by mutual consent in writing signed by both parties or in accordance with relevant laws and regulations applicable under either party’s country’s law.9. Disputes SettlementFailure to agree on such place, each party may request arbitration at its own country’s arbitration institution located in its capital city respectively.If any party fails to perform its contractual obligations, such failure may be considered as a breach of contract underapplicable laws and regulations, subject to compensation for losses incurred by non-breaching party.If such dispute cannot be settled through negotiation or arbitration, it may be submitted to court in accordance with applicable laws and regulations under either party’s country’s law.Both parties agree that this contract shall be governed by and interpreted in accordance with laws applicable under either party’s country’s law, except otherwise stipulated by applicable international trade agreements or conventions to which both parties are parties.The language of this contract is English and shall be deemed valid whether signed by parties orally or confirmed by any party’s representative or other documents with equivalent legal effect.Upon execution in duplicate originals; each party retains one original copy for record purposes only..篇2国际贸易合同（International Trade Contract）本合同由以下双方签订：买方（Buyer）：___________卖方（Seller）：___________鉴于买方和卖方同意按照本合同规定的条款进行国际贸易，双方特此达成如下协议：一、商品与数量（Commodity and Quantity）1. 卖方同意向买方提供以下商品：___________ （商品名称、规格、数量等详细信息）。
国际贸易合同范本英文(分享)6篇
国际贸易合同范本英文（分享）6篇篇1International Trade Contract TemplateThis International Trade Contract is made and entered into on [date], by and between:Seller: [Name of Seller]Address: [Seller's Address]City: [City], Country: [Country]Telephone: [Seller's Telephone Number]Email: [Seller's Email]Buyer: [Name of Buyer]Address: [Buyer's Address]City: [City], Country: [Country]Telephone: [Buyer's Telephone Number]Email: [Buyer's Email]Whereas Seller desires to sell and Buyer desires to purchase the following goods/services:Description of goods/services: [Description]Quantity: [Quantity]Price: [Price]Delivery Date: [Delivery Date]Payment Terms: [Payment Terms]Incoterm: [Incoterm]1. Terms of Sale:1.1 Seller agrees to sell and deliver the goods/services to Buyer in accordance with the description, quantity, price, delivery date, payment terms, and incoterm specified above.1.2 Buyer agrees to purchase and accept delivery of the goods/services from Seller in accordance with the terms specified above.2. Price and Payment:2.1 The total price of the goods/services shall be [Total Price] and shall be paid by Buyer to Seller in [Currency] upon delivery.2.2 Payment shall be made by [Payment Method] to the bank account designated by Seller.3. Delivery:3.1 Seller shall deliver the goods/services to Buyer on or before the delivery date specified above.3.2 Delivery shall be made to the address specified by Buyer or as otherwise agreed upon by the parties.4. Title and Risk:4.1 Title to the goods/services shall pass to Buyer upon delivery.4.2 Risk of loss or damage to the goods/services shall pass to Buyer upon delivery.5. Inspection and Acceptance:5.1 Buyer shall have [Number of Days] days from the date of delivery to inspect the goods/services and notify Seller in writing of any non-conformities.5.2 If Buyer fails to notify Seller within the specified time period, the goods/services shall be deemed accepted.6. Warranty:6.1 Seller warrants that the goods/services shall conform to the description provided and be free from defects in material and workmanship.6.2 Seller's liability under this warranty shall be limited to the repair, replacement, or refund of the purchase price of thenon-conforming goods/services.7. Force Majeure:7.1 Neither party shall be liable for any failure or delay in performance under this Contract due to events beyond its reasonable control, including but not limited to acts of God, strikes, and natural disasters.8. Governing Law and Dispute Resolution:8.1 This Contract shall be governed by the laws of [Country].8.2 Any disputes arising out of or in connection with this Contract shall be resolved through arbitration in [City] in accordance with the rules of [Arbitration Institution].In witness whereof, the parties hereto have executed this International Trade Contract as of the date first above written.Seller: [Signature]Buyer: [Signature]篇2International Trade Contract TemplateThis International Trade Contract Template is hereby entered into by and between [Seller Name], located at [Seller Address], and [Buyer Name], located at [Buyer Address], collectively referred to as the "Parties".1. Products and QuantitySeller agrees to sell, transfer, and deliver to Buyer, and Buyer agrees to purchase from Seller, the following products:- Product Name 1: Quantity- Product Name 2: Quantity2. PriceThe total price for the products shall be [Total Price], payable as follows:- Deposit: [Deposit Amount]- Balance: [Balance Amount]The payment shall be made in [Currency] through [Payment Method].3. DeliverySeller shall deliver the products to Buyer's premises located at [Delivery Address] on or before the agreed-upon delivery dateof [Delivery Date]. Buyer shall be responsible for all shipping costs.4. Quality AssuranceSeller shall ensure that the products delivered conform to the specifications as agreed upon by the Parties. Any defects or nonconformities shall be reported by Buyer within [Number] days of receipt of the products.5. InspectionBuyer shall have the right to inspect the products upon delivery. Any rejection or discrepancy shall be promptly communicated to Seller in writing.6. Force MajeureNeither Party shall be liable for any delay or failure in the performance of the contract due to causes beyond their reasonable control, including but not limited to acts of God, strikes, war, or governmental regulations.7. Governing LawThis contract shall be governed by and construed in accordance with the laws of [Jurisdiction]. Any disputes arisingout of or related to this contract shall be resolved through arbitration in [Arbitration Location].8. ConfidentialityThe Parties agree to keep all confidential information disclosed during the performance of this contract confidential and not disclose it to any third party without prior written consent.IN WITNESS WHEREOF, the Parties have executed this contract on the date first above written.________________________[Seller Name]________________________[Buyer Name]This International Trade Contract Template constitutes the entire agreement between the Parties and supersedes all prior agreements, negotiations, and understandings, whether written or oral. By signing below, the Parties acknowledge and agree to the terms and conditions set forth in this contract.(Signature)Date: _______________________Place: _______________________篇3International Trade Contract TemplateThis International Trade Contract (the “Contract”) is made and entered into on [date], between [Seller], a company incorporated in [country], with a registered address at [address], and [Buyer], a company incorporated in [country], with a registered address at [address].1. PartiesSeller: [Seller name]Buyer: [Buyer name]2. Product DescriptionThe Seller agrees to sell and deliver to the Buyer the following products:- Product name:- Quantity:- Quality:- Price:- Delivery date:- Payment terms:3. Delivery TermsThe Seller shall deliver the products to the Buyer at the following location:Delivery address:Delivery method:Delivery date:Risk of loss shall pass to the Buyer upon delivery of the products.4. Payment TermsThe Buyer shall pay the Seller the total sum of [amount] for the products in accordance with the following payment terms:- [Describe payment terms]5. Quality AssuranceThe Seller warrants that the products shall be of satisfactory quality, fit for their intended purpose, and shall conform to any specifications agreed upon by the parties.6. Inspection and AcceptanceThe Buyer shall have the right to inspect the products upon delivery. Any defects or non-conformities shall be notified to the Seller in writing within [number] days of delivery.7. Force MajeureNeither party shall be liable for any failure or delay in performance under this Contract due to circumstances beyond its control, including but not limited to acts of God, war, riot, civil disturbance, government action, or natural disaster.8. Governing LawThis Contract shall be governed by and construed in accordance with the laws of [country].9. Dispute ResolutionAny dispute arising out of or in connection with this Contract shall be resolved through negotiations between the parties. If the dispute cannot be resolved amicably, it shall be referred toarbitration in accordance with the rules of [arbitration institution].10. Entire AgreementThis Contract constitutes the entire agreement between the parties with respect to the subject matter hereof and supersedes all prior agreements and understandings, whether written or oral.IN WITNESS WHEREOF, the parties hereto have executed this Contract as of the date first above written.[Seller]By: [Authorized signatory]Title: [Title]Date:[Buyer]By: [Authorized signatory]Title: [Title]Date:This International Trade Contract is entered into and effective as of the date set forth above.***This is a template of an International Trade Contract, and is provided for informational purposes only. It is advisable to seek legal advice before using this Contract in a real transaction.***篇4International Trade Contract TemplateThis International Trade Contract (the “Contract”) is made and entered into on [Date] by and between [Name of Seller], a company organized and existing under the laws of [Country], with its principal place of business located at [Address], and [Name of Buyer], a company organized and existing under the laws of [Country], with its principal place of business located at [Address].Recitals1. The Seller is engaged in the business of [Description of Seller’s Business].2. The Buyer is engaged in the business of [Description of Buyer’s Business].3. The Seller desires to sell and deliver the Goods (as defined below) to the Buyer, and the Buyer desires to purchase andreceive the Goods from the Seller, subject to the terms and conditions set forth in this Contract.AgreementIn consideration of the mutual covenants contained herein and other good and valuable consideration, the sufficiency of which is hereby acknowledged, the parties hereby agree as follows:1. Sale and Purchase of Goods1.1. Subject to the terms and conditions of this Contract, the Seller agrees to sell and deliver to the Buyer, and the Buyer agrees to purchase and receive from the Seller, the goods (the “Goods”) as described in Exhibit A attached hereto.2. Purchase Price2.1. The purchase price for the Goods shall be [Amount] per [Unit], for a total purchase price of [Total Amount], payable in [Currency] upon delivery of the Goods to the Buyer.3. Delivery3.1. The Seller shall deliver the Goods to the Buyer at the address specified by the Buyer within [Number of Days] daysfrom the date of this Contract. The Buyer shall bear all costs and risks of transportation and delivery of the Goods.4. Inspection and Acceptance4.1. The Buyer shall inspect the Goods promptly upon delivery and shall notify the Seller in writing of anynon-conforming Goods or other defects within [Number of Days] days of delivery.4.2. The Buyer shall be deemed to have accepted the Goods and waived any claims for non-conforming Goods or other defects if the Buyer fails to notify the Seller within the specified time period.5. Representations and Warranties5.1. The Seller represents and warrants that:(a) the Goods are free from any liens or encumbrances;(b) the Goods conform to the specifications set forth in Exhibit A; and(c) the Seller has the right and authority to sell the Goods.6. Governing Law6.1. This Contract shall be governed by and construed in accordance with the laws of [Country], without regard to its conflict of laws principles.7. Entire Agreement7.1. This Contract constitutes the entire agreement between the parties with respect to the subject matter hereof and supersedes all prior agreements and understandings, whether written or oral.IN WITNESS WHEREOF, the parties hereto have caused this Contract to be executed as of the date first above written.Seller: [Name of Seller]By: [Signature]Name: [Name of Signatory]Title: [Title of Signatory]Buyer: [Name of Buyer]By: [Signature]Name: [Name of Signatory]Title: [Title of Signatory]篇5International Trade Contract TemplateThis International Trade Contract ("Contract") is made and entered into on [Date], by and between [Seller], a company organized and existing under the laws of [Country] with its principal place of business at [Address] ("Seller"), and [Buyer], a company organized and existing under the laws of [Country] with its principal place of business at [Address] ("Buyer").1. Sales and Purchase. Seller agrees to sell and Buyer agrees to purchase the goods described in Exhibit A hereto (the "Goods") in accordance with the terms and conditions of this Contract.2. Price and Payment. The purchase price for the Goods shall be [Amount] per unit, payable in [Currency]. Buyer shall pay Seller the total purchase price within [Number] days of receipt of the Goods.3. Delivery. Seller shall deliver the Goods to Buyer at [Address] in [City], [Country], on or before [Date]. In the event Seller is unable to deliver the Goods by such date, Buyer may cancel this Contract without any liability.4. Inspection and Acceptance. Buyer shall have the right to inspect the Goods within [Number] days of their delivery. IfBuyer determines that the Goods are defective or do not conform to the specifications set forth in Exhibit A, Buyer may return the Goods to Seller at Seller's expense or request a refund.5. Warranties. Seller warrants that the Goods shall be free from defects in materials and workmanship and shall conform to the specifications set forth in Exhibit A. Seller further warrants that it has good and marketable title to the Goods and has the right to sell the Goods to Buyer.6. Force Majeure. Neither party shall be liable for any failure or delay in performance under this Contract if such failure or delay is caused by acts of God, strikes, wars, or any other event beyond the control of the parties.7. Governing Law. This Contract shall be governed by and construed in accordance with the laws of [Country].IN WITNESS WHEREOF, the parties hereto have executed this International Trade Contract as of the date first above written.____________________________________________________________[Seller][Buyer]篇6International Trade Contract TemplateThis International Trade Contract ("Contract") is entered into on [Date], by and between:[Name of Seller], a company registered under the laws of [Country], having its registered office at [Address] ("Seller"), and[Name of Buyer], a company registered under the laws of [Country], having its registered office at [Address] ("Buyer").WHEREAS, Seller desires to sell the products listed in Exhibit A ("Products") to Buyer and Buyer desires to purchase the Products from Seller;NOW, THEREFORE, in consideration of the mutual covenants and agreements contained herein, the parties hereto agree as follows:1. Products: Seller agrees to sell and deliver the Products to Buyer as specified in Exhibit A attached hereto.2. Price: The price for the Products shall be as stated in Exhibit A. Payment shall be made by Buyer to Seller in [Currency] within [Number] days from the date of delivery.3. Delivery: Seller shall deliver the Products to Buyer's designated address as set forth in Exhibit A. Delivery shall be made on or before the date specified in Exhibit A.4. Warranty: Seller represents and warrants that the Products are free from defects in material and workmanship and conform to the specifications set forth in Exhibit A. Seller shall replace or refund the purchase price for any defective Products returned by Buyer.5. Intellectual Property: Seller represents and warrants that it has the right to sell the Products and that the sale and delivery of the Products will not infringe any third-party intellectual property rights.6. Governing Law: This Contract shall be governed by and construed in accordance with the laws of [Country].7. Dispute Resolution: Any dispute arising out of or in connection with this Contract shall be resolved through negotiation between the parties. If the dispute cannot be resolved through negotiation, the parties agree to submit the dispute to arbitration in accordance with the rules of [Arbitration Institution].IN WITNESS WHEREOF, the parties hereto have executed this Contract as of the date first above written.Seller:Name: [Name]Title: [Title]Date:Buyer:Name: [Name]Title: [Title]Date:Exhibit AProducts: [Product Description]Price: [Price Per Unit]Delivery Date: [Date]Delivery Address: [Address]。
国际贸易合同范本中英文3篇
国际贸易合同范本中英文3篇篇一国际贸易合同范本中英文合同编号：日期：卖方：地址：电话：电子：买方：地址：电话：电子：买卖双方经协商同意按下列条款成交：1. 货物名称、规格和质量：[具体描述货物的名称、规格和质量]2. 数量：[具体数量]3. 单价：[具体价格]4. 总值：[总价]5. 交货条件：[如 FOB、CIF 等]6. 原产地国别：[货物的原产国]7. 包装及标准：[描述货物的包装方式和标准]8. 唛头：[运输标志]9. 装运期：[预计装运日期]10. 装运口岸和目的地：[装运港和目的港]11. 保险：[由哪方负责购买保险，保险类型和金额]12. 付款条件：[付款方式和时间]13. 单据：[卖方需要提供的单据，如发票、提单等]14. 检验：[检验标准和方式]15. 索赔：[索赔的条件和程序]16. 不可抗力：[不可抗力的定义和处理方式]17. 仲裁：[仲裁的地点和机构]18. 法律适用：[合同适用的法律]19. 其他条款：[其他双方约定的条款]卖方（盖章）：____________________代表（签字）：____________________日期：____________________买方（盖章）：____________________代表（签字）：____________________日期：____________________篇二国际贸易合同范本中英文合同编号：日期：卖方：地址：电话：电子：买方：地址：电话：电子：买卖双方经协商同意按下列条款成交：1. 货物名称、规格和质量：[具体描述货物的名称、规格和质量标准]2. 数量：[具体数量]3. 单价：[具体价格]4. 总值：[总价]5. 交货条件：[说明交货的地点、时间和方式]6. 原产地国别：[货物的原产国家或地区]7. 包装及标准：[描述货物的包装方式和标准]8. 唛头：[规定货物的唛头标记]9. 付款方式：[说明付款的方式和时间]10. 运输方式及费用负担：[指定运输方式，并说明运费的承担方]11. 保险：[说明是否购买保险以及保险的类型和金额]12. 检验：[规定货物的检验方式和标准]13. 索赔：[说明在货物出现问题时的索赔程序和要求]14. 不可抗力：[约定不可抗力事件的处理方式]15. 争议解决：[指定解决争议的方式，如仲裁或诉讼]16. 法律适用：[确定适用的法律]17. 本合同于[合同签订日期]由双方代表签字后生效，一式两份，买卖双方各执一份。
英语版国际贸易合同5篇
英语版国际贸易合同5篇篇1International Trade ContractThis contract is made on [Date] between [Company Name 1, Country 1] and [Company Name 2, Country 2] (hereinafter referred to as the "Buyer" and the "Seller").I. Contracting Parties:The contracting parties are identified as follows:Buyer: [Company Name 1, Address, Contact Information]Seller: [Company Name 2, Address, Contact Information]II. Subject Matter of Contract:This contract concerns the sale and purchase of [Product Description, Quantity, Specifications, etc.] (hereinafter referred to as the "Product").III. Terms of Contract:1. Price and Payment: The total price for the Product shall be [Amount in currency and denomination]. Payment shall be made through [Payment method – Bank Transfer, Letter of Credit, etc.] with the details of payment terms and conditions specified in Section IV.2. Delivery and Shipping: Delivery shall be made to the Buyer at [Delivery location]. Shipping details, including transportation mode and risk transfer, shall be agreed upon by both parties.3. Quality and Inspection: The Seller shall ensure that the Product meets the agreed specifications and quality standards. Inspection of the Product shall be conducted by an independent third party inspector prior to shipment.4. Confidentiality: Both parties shall maintain confidentiality of all information related to this contract and its execution.IV. Additional Terms and Conditions:1. Force Majeure: If performance of this contract is prevented or delayed due to force majeure circumstances beyond the control of either party, the affected party shall notify the other party promptly and provide evidence of such circumstances. The period of performance shall be extended accordingly.2. Governing Law: This contract shall be governed by the laws of [Country/Jurisdiction]. Any disputes arising out of or in connection with this contract shall be settled through friendly negotiation or mediation. If no settlement is reached, the dispute shall be referred to the courts located in [Place].3. Modification and Termination: No modification or termination of this contract shall be effective unless agreed in writing by both parties.4. Entire Agreement: This contract constitutes the entire agreement between the Buyer and Seller on the subject matter hereof and no modifications or amendments shall be made unless agreed in writing by both parties.5. Dispute Resolution: In case of any disputes arising between the two parties related to this contract, they should first seek to resolve them through friendly negotiation. If such disputes cannot be resolved through negotiation within a reasonable period of time, either party may submit the dispute to arbitration under the rules of [Arbitration Institution] with its arbitration held in [Place]. The decision of the arbitration panel shall be final and binding on both parties.6. Miscellaneous: Both parties hereby agree that this contract is binding upon them and they shall perform theirrespective obligations under this contract in good faith. Any other terms or conditions not specifically mentioned in this contract shall be governed by customary trade practices or applicable laws.V. Schedules and Schedules:[Insert schedules and timetables for delivery, payment, inspection, etc.]IN WITNESS WHEREOF, the parties have executed this contract in duplicate originals, each party retaining one original and signing it in duplicate for exchange of copies as true and valid legal documents.Buyer: _______________________________________________ (Authorized Representative)Seller: _______________________________________________ (Authorized Representative)Date: _______________________________________________(Note: Please adapt product details, terms & conditions, schedules etc., to reflect your specific business requirements before finalizing this contract.)篇2International Trade ContractThis contract is made on [Date] between [Company Name 1, Country 1] and [Company Name 2, Country 2] (hereinafter referred to as "the Seller" and "the Buyer" respectively).1. Contract Commodity and Specifications:The Seller shall sell and the Buyer shall purchase the goods specified in Annex A of this Contract, which includes the commodity name, quantity, type, quality, specifications, packaging, etc.2. Price and Terms of Payment:The total contract price shall be as stated in Annex A. The terms of payment are as follows:a) The Buyer shall make a down payment of XX% of the total contract value upon signing of this contract.b) The remaining XX% shall be paid through T/T (telegraphic transfer) upon delivery of the goods and receipt of the shipping documents.c) All banking fees shall be borne by the party making the transfer.3. Delivery:The Seller shall deliver the goods within XX days from the date of receiving the buyer's down payment. Delivery terms are FOB (Free On Board), [Port Name]. Any delay in delivery caused by Force Majeure conditions shall be mitigated by mutual consultation between the parties.4. Quality Inspection and Acceptance:The quality of the goods shall be inspected by an independent third-party inspection agency mutually agreed upon by both parties. The goods shall be accepted only if they meet the specifications stated in Annex A. Any discrepancies in quality must be reported within XX days of receipt of goods.5. Risk Transfer:Risk of loss or damage to the goods shall pass to the Buyer upon completion of loading at the named port on board the vessel. Prior to this point, risk associated with the goods remains with the Seller.6. Confidentiality:Both parties shall maintain confidentiality of all information related to this contract that is not publicly available, except as required by law or regulatory authorities.7. Warranty and Claims:The Seller guarantees that the goods are free from defects in material and workmanship and conform to the specifications mentioned in Annex A. If any claims are made by the Buyer due to defects in quality or quantity, the Seller shall bear all responsibilities and costs associated with such claims.8. Force Majeure:If any event of Force Majeure occurs which prevents or hinders the performance of this contract, the affected party shall immediately notify the other party and both parties shall consider alternative arrangements or adjustments to this contract.9. Termination:This contract may be terminated by either party giving written notice to the other party if there is a breach of contract which cannot be rectified within a reasonable period of time. Any unfulfilled obligations at the time of termination shall be settledin accordance with the laws of the country where the Seller is located.10. Jurisdiction and Law:This contract shall be governed by and interpreted in accordance with the laws of [Country]. Any disputes arising from or in connection with this contract shall be settled through friendly negotiations between both parties. If no settlement can be reached, either party may submit such disputes to [Local Court/International Court] for resolution.In witness whereof, the parties have signed this contract on the dates specified below:Seller: _________________________ Date: _________ Signature:_________________________Company Name: _________________________Address: _________________________Contact Person: _________________________Tel: _________________________ Fax: _________________________ Email: _________________________Bank Account Information: _________________________Bank Name: _________________________ Bank Address:_________________________Bank Contact Person: _________________________ Bank Tel No: _________________________篇3国际贸易合同（International Trade Contract）甲方（买方）：____________________地址：____________________________________法定代表人：____________________联系方式：____________________电子邮箱：____________________乙方（卖方）：____________________地址：____________________________________法定代表人：____________________联系方式：____________________电子邮箱：____________________鉴于甲、乙双方同意按照本合同条款进行国际贸易，双方经友好协商，达成如下协议：一、商品及规格（Commodity and Specifications）双方同意交易的商品为：____________________（具体商品名称）。
国际贸易合同范本英文5篇
国际贸易合同范本英文5篇篇1International Trade Contract TemplateThis International Trade Contract ("Contract") is entered into between the following parties:Seller: [Name of Seller]Address: [Address of Seller]Contact: [Contact Information of Seller]Buyer: [Name of Buyer]Address: [Address of Buyer]Contact: [Contact Information of Buyer]1. Product DescriptionThe Seller agrees to sell and the Buyer agrees to purchase the following product(s) in accordance with the terms and conditions of this Contract:Description: [Description of the Product]Quantity: [Quantity of the Product]Quality: [Quality Standards of the Product]Price: [Price per Unit of the Product]Currency: [Currency in which the Price is expressed]2. Delivery TermsThe Seller shall deliver the product(s) to the Buyer at the following location:Delivery Address: [Delivery Address]The delivery shall be made on or before the following date: [Delivery Date]The Seller shall be responsible for arranging the transportation of the product(s) to the specified location.3. Payment TermsThe Buyer shall make the payment for the product(s) in the following manner:Payment Method: [Method of Payment]Payment Schedule: [Payment Schedule]The Seller shall provide the Buyer with an invoice for the product(s) upon delivery.4. Inspection and AcceptanceThe Buyer shall have the right to inspect the product(s) upon delivery and shall have [Number of Days] days to accept or reject the product(s) based on the quality standards agreed upon in this Contract.If the Buyer finds the product(s) to be non-conforming to the quality standards, the Buyer shall have the right to reject the product(s) and request a replacement or refund.5. WarrantyThe Seller warrants that the product(s) are free from defects in materials and workmanship and comply with all applicable laws and regulations. The Seller agrees to replace or refund any defective product(s) within a reasonable time frame.6. Governing LawThis Contract shall be governed by and construed in accordance with the laws of [Jurisdiction].7. Dispute ResolutionAny disputes arising out of or in connection with this Contract shall be resolved through arbitration in accordance with the rules of [Arbitration Body].8. ConfidentialityBoth parties agree to keep all information exchanged during the course of this Contract confidential and not to disclose it to any third party without the other party's consent.9. Entire AgreementThis Contract constitutes the entire agreement between the parties with respect to the subject matter hereof and supersedes all prior agreements, arrangements, and understandings.IN WITNESS WHEREOF, the parties hereto have executed this Contract as of the Effective Date first above written.Seller: _______________________Buyer: _______________________Date: ________________________篇2International Trade Contract TemplateThis International Trade Contract is made effective as of [Date], between [Seller], located at [Seller's Address] and [Buyer], located at [Buyer's Address.1. Product Description:The Seller agrees to sell and deliver the following products: [Description of the Products], to the Buyer in accordance with the terms and conditions of this contract.2. Quantity:The Seller agrees to deliver a quantity of [Quantity] of the products as mentioned in the Product Description section.3. Price:The total price for the products to be delivered under this contract is [Total Price], payable in [Currency]. The payment terms shall be [Payment Terms].4. Delivery:The Seller agrees to deliver the products to the Buyer at [Delivery Location] on or before the delivery date specified in this contract. The Buyer shall bear all costs related to the delivery of the products.5. Inspection:The Buyer shall have the right to inspect the products upon delivery and shall notify the Seller of any defects or discrepancies within [Number of Days] days of delivery.6. Acceptance:The Buyer shall be deemed to have accepted the products if no notice of rejection is given within the specified time frame. Any defects or discrepancies noticed by the Buyer shall be remedied by the Seller at no additional cost to the Buyer.7. Warranties:The Seller warrants that the products delivered under this contract are of good quality, free from defects, and conform to the specifications set forth in this contract.8. Governing Law:This contract shall be governed by and construed in accordance with the laws of [Jurisdiction]. Any disputes arising out of or related to this contract shall be resolved through arbitration in accordance with the rules [Arbitration Rules].9. Entire Agreement:This contract constitutes the entire agreement between the parties and supersedes any prior agreements or understandings, whether written or oral, relating to the subject matter herein.IN WITNESS WHEREOF, the parties hereto have executed this International Trade Contract as of the date first above written.[Seller's Signature] [Buyer's Signature][Seller's Name] [Buyer's Name]This International Trade Contract Template is provided for reference purposes only and may need to be customized to suit the specific requirements of the parties involved in the transaction. It is advisable to seek legal advice before entering into any international trade contracts.篇3International Trade Contract SampleThis International Trade Contract ("Contract") is entered into on [date], by and between [Seller], a company organized and existing under the laws of [country], with its principal place of business at [address] ("Seller"), and [Buyer], a company organized and existing under the laws of [country], with its principal place of business at [address] ("Buyer").WHEREAS, Seller is engaged in the business of manufacturing and selling [products/services], and Buyer desires to purchase [products/services] from Seller for resale in [country];NOW, THEREFORE, in consideration of the mutual covenants and promises contained herein, Seller and Buyer hereby agree as follows:1. Product/Service DescriptionSeller agrees to sell to Buyer and Buyer agrees to purchase from Seller [describe the products/services], in the quantities and at the prices set forth in Exhibit A, attached hereto and incorporated herein by reference.2. Delivery TermsSeller shall deliver the products/services to Buyer at the location specified in Exhibit A in accordance with the delivery schedule set forth therein. Any delay in delivery shall entitle Buyer to liquidated damages as set forth in Exhibit A.3. Price and Payment TermsThe price for the products/services shall be as set forth in Exhibit A. Buyer shall make payment to Seller in [currency] within [number] days of receipt of the invoice.4. Quality AssuranceSeller warrants that the products/services shall conform to the specifications set forth in Exhibit A and shall be ofmerchantable quality. In the event of any non-conformity, Buyer may reject the products/services and seek remedies as set forth in Exhibit A.5. Inspection and AcceptanceBuyer shall have the right to inspect the products/services upon delivery. Buyer shall notify Seller of any non-conformities within [number] days of receipt. Failure to notify Seller within the specified time frame shall constitute acceptance of the products/services.6. Intellectual Property RightsSeller represents and warrants that it has the right to sell the products/services and that the sale of the products/services does not infringe upon any third-party intellectual property rights.7. Limitation of LiabilityIn no event shall either party be liable to the other for any consequential, incidental, special, or punitive damages arising out of or related to this Contract, even if the party has been advised of the possibility of such damages.8. Governing LawThis Contract shall be governed by and construed in accordance with the laws of [country], without regard to its conflicts of law principles.9. Dispute ResolutionAny dispute arising out of or relating to this Contract shall be resolved through arbitration in [city], [country], in accordance with the rules of [arbitration organization]. The decision of the arbitrator shall be final and binding on the parties.IN WITNESS WHEREOF, the parties hereto have executed this Contract as of the date first above written.[Signature of Seller] [Signature of Buyer][Printed Name and Title of Seller] [Printed Name and Title of Buyer]Exhibit A: Price List and Delivery ScheduleThis Contract constitutes the entire agreement between the parties with respect to the subject matter hereof and supersedes all prior or contemporaneous agreements and understandings, whether written or oral. This Contract may not be modified except in writing signed by both parties.篇4International Trade Contract TemplateThis International Trade Contract Template (the "Contract") is entered into as of [Date], by and between [Company A], a [Country A] corporation having its principal place of business at [Address A] ("Seller"), and [Company B], a [Country B] corporation having its principal place of business at [Address B] ("Buyer"). Seller and Buyer may be collectively referred to as the "Parties."1. Product DescriptionSeller agrees to sell and deliver to Buyer the following products (the "Products"): [Description of Products]. The Products shall be delivered in accordance with the specifications set forth in Exhibit A attached hereto and incorporated herein by reference.2. Price and PaymentThe price of the Products shall be [Price] per unit. Buyer shall pay Seller the total price for the Products in the amount of [Total Price], which shall be paid upon delivery of the Products. Payment shall be made in [Currency] to the bank account specified by Seller.3. DeliverySeller shall deliver the Products to Buyer within [Delivery Timeframe] days of the Effective Date. Delivery shall be made to [Delivery Location]. Buyer shall be responsible for all costs associated with the transportation and delivery of the Products to the Delivery Location.4. InspectionBuyer shall have the right to inspect the Products upon delivery. Buyer must notify Seller in writing of any defects or nonconformities in the Products within [Inspection Period] days of delivery. Failure to provide written notice within the Inspection Period shall constitute acceptance of the Products.5. Quality AssuranceSeller represents and warrants that the Products shall be of good quality and free from defects in material and workmanship. Seller shall replace any defective Products at no additional cost to Buyer.6. Title and Risk of LossTitle to and risk of loss of the Products shall pass to Buyer upon delivery. Buyer shall bear all risk of loss or damage to the Products after delivery.7. Intellectual Property RightsSeller retains all rights, title, and interest in and to any intellectual property associated with the Products. Buyer shall not use Seller's intellectual property without Seller's prior written consent.8. ConfidentialityThe Parties agree to keep all information related to this Contract confidential and not disclose it to any third parties without the other Party's consent.9. Governing LawThis Contract shall be governed by and construed in accordance with the laws of [Country A]. Any disputes arising out of or in connection with this Contract shall be resolved through arbitration in [City, Country A] in accordance with the rules of the [Arbitration Association].10. Entire AgreementThis Contract constitutes the entire agreement between the Parties with respect to the sale and purchase of the Products and supersedes all prior agreements and understandings, whether written or oral.IN WITNESS WHEREOF, the Parties hereto have executed this Contract as of the Effective Date.[Company A]By: ___________________Name: _________________Title: ___________________[Company B]By: ___________________Name: _________________Title: ___________________EXHIBIT ASpecifications of the Products:[Description of Specifications]篇5International Trade Contract TemplateThis International Trade Contract (the "Contract") is entered into as of [date] by and between [Seller Name], a company organized and existing under the laws of [country], with its principal place of business at [address] (the "Seller"), and [Buyer Name], a company organized and existing under the laws of[country], with its principal place of business at [address] (the "Buyer").1. Product DescriptionSeller agrees to sell and deliver to Buyer, and Buyer agrees to purchase from Seller, the following products:- Product Name- Quantity- Specifications2. Price and Payment TermsThe total price for the products shall be [amount] USD. The payment shall be made in [currency] within [number] days of the delivery date. Payment shall be made by [payment method].3. Delivery TermsThe products shall be delivered by Seller to Buyer at [delivery location]. Delivery shall be made on [delivery date]. The delivery terms shall be [Incoterms].4. Inspection and AcceptanceBuyer shall inspect the products promptly upon delivery. If Buyer finds the products to be non-conforming or defective,Buyer shall notify Seller within [number] days of delivery. Seller shall have the right to remedy any non-conformities or defects within a reasonable time.5. WarrantySeller warrants that the products shall conform to the specifications and be free from defects in material and workmanship. Seller's liability under this warranty shall be limited to repairing or replacing the non-conforming or defective products.6. Governing LawThis Contract shall be governed by and construed in accordance with the laws of [country]. Any dispute arising out of or relating to this Contract shall be submitted to the exclusive jurisdiction of the courts of [country].7. Force MajeureNeither party shall be liable for any failure or delay in the performance of its obligations under this Contract caused by events beyond its reasonable control, including but not limited to acts of God, war, terrorism, fire, flood, or government actions.8. Entire AgreementThis Contract constitutes the entire agreement between the parties with respect to the sale and purchase of the products and supersedes all prior agreements and understandings, whether written or oral, relating to the subject matter hereof.IN WITNESS WHEREOF, the parties have executed this Contract as of the date first above written.[Seller Name] [Buyer Name]By: [Authorized Signatory] By: [Authorized Signatory]Name: Name:Title: Title:。
英语版国际贸易合同5篇
英语版国际贸易合同5篇篇1国际贸易合同（International Trade Contract）合同编号: ___________甲方（买方）：____________________住址：__________________________________联系方式：_____________________________乙方（卖方）：_____________________住址：_________________________________联系方式：_____________________________鉴于甲方需要购买以下商品，乙方同意按照本合同规定的条款和条件出售该商品，双方经友好协商一致，达成如下协议：一、商品描述（Description of Goods）1. 商品名称：______________________________ （Name of Goods）2. 商品规格：______________________________ （Specifications）3. 商品数量：______________________________ （Quantity）4. 商品单价：______________________________ （Unit Price）5. 总金额：________________________________ （Total Amount）6. 付款方式：________________________________ （Payment Terms）7. 付款期限：________________________________ （Payment Deadline）二、交货和验收（Delivery and Acceptance）1. 交货期限：乙方应在合同签署后的________天内完成交货。
（Delivery Deadline）2. 交货地点：_______________________________________ （Delivery Point）3. 运输方式：_______________________________________ （Transportation Mode）4. 验收标准：按照合同规定的规格和质量标准进行验收。
国际贸易合同协议英文版5篇
国际贸易合同协议英文版5篇篇1International Trade Contract AgreementThis International Trade Contract Agreement ("Agreement") is entered into by and between the undersigned parties:Seller: [Name of Seller]Address: [Seller's Address]Contact Person: [Contact Person]Buyer: [Name of Buyer]Address: [Buyer's Address]Contact Person: [Contact Person]The Seller agrees to sell, and the Buyer agrees to purchase, the following items according to the terms and conditions set forth in this Agreement:1. Product Description:The Seller agrees to provide the following product to the Buyer: [Product Description, Quantity, Quality, etc.]2. Price:The price of the products shall be [Insert Price] per [Unit of Measurement]. The total purchase price for the products shall be [Insert Total Price].3. Delivery:The Seller shall deliver the products to the Buyer at the following address: [Delivery Address]. The delivery date shall be on or before [Insert Delivery Date].4. Payment Terms:The Buyer agrees to pay the Seller in full for the products upon delivery. Payment shall be made in [Currency] using [Payment Method].5. Inspection and Acceptance:The Buyer shall inspect the products upon delivery and shall have [Insert Number of Days] days to notify the Seller in writing of any defects or nonconformities. If the Buyer does not provide such notification, the products shall be deemed accepted.6. Governing Law:This Agreement shall be governed by and construed in accordance with the laws of [Jurisdiction].7. Dispute Resolution:Any disputes arising out of this Agreement shall be resolved through arbitration in [Arbitration Location] in accordance with the rules of [Arbitration Institution].8. Confidentiality:Both parties agree to keep all information related to this Agreement confidential and not to disclose it to any third party without the other party's prior written consent.9. Entire Agreement:This Agreement constitutes the entire agreement between the parties and supersedes all prior agreements and understandings, whether written or oral, relating to the subject matter hereof.IN WITNESS WHEREOF, the parties hereto have executed this Agreement as of the date first above written.Seller:[Signature][Name][Title]Buyer:[Signature][Name][Title]Date:This International Trade Contract Agreement is hereby accepted and agreed to by the parties listed above.[Insert Witness Signature][Name][Title]Date:[Insert Witness Signature][Name][Title]Date:[Insert Notary Signature][Title]Date:This International Trade Contract Agreement shall become effective upon the date of the last signature.[End of Agreement]篇2International Trade Contract AgreementThis International Trade Contract Agreement ("Agreement") is entered into as of [Date] by and between [Seller], located at [Seller's Address], and [Buyer], located at [Buyer's Address], collectively referred to as the "Parties."1. Sale of Goods: Seller agrees to sell and deliver to Buyer the following goods: [Description of Goods] (the "Goods").2. Price: The price for the Goods shall be [Price] per [Unit], totaling [Total Price]. The price includes all costs associated with the production, packaging, and delivery of the Goods to the designated location.3. Payment: Buyer shall pay for the Goods within [Number] days of receipt of the Goods. Payment shall be made in [Currency] by [Payment Method]. In the event of late payment, Buyer shall be responsible for a late payment fee of [Fee].4. Delivery: Seller agrees to deliver the Goods to the designated location of [Delivery Location] by [Delivery Date]. Buyer shall be responsible for all costs associated with customs clearance, import duties, and taxes.5. Inspection: Upon receipt of the Goods, Buyer shall have [Number] days to inspect the Goods for any defects ornon-conformities. If any defects are found, Buyer shall notify Seller in writing within [Number] days.6. Warranty: Seller warrants that the Goods shall be free from defects in materials and workmanship for a period of [Number] days from the date of delivery.7. Force Majeure: Neither Party shall be liable for any delay or failure to perform its obligations under this Agreement due to force majeure events such as natural disasters, wars, or governmental actions beyond the control of the Parties.8. Governing Law: This Agreement shall be governed by and construed in accordance with the laws of [Country]. Any disputesarising out of this Agreement shall be resolved through arbitration in [Arbitration Venue] according to the rules of [Arbitration Organization].9. Confidentiality: The Parties agree to keep all information related to this Agreement confidential and not disclose it to any third parties without the prior written consent of the other Party.10. Entire Agreement: This Agreement constitutes the entire agreement between the Parties with respect to the sale and purchase of the Goods and supersedes all prior agreements, representations, and understandings.IN WITNESS WHEREOF, the Parties have executed this Agreement as of the date first above written.[Seller] [Buyer]___________________ ___________________[Authorized Signature] [Authorized Signature][Print Name] [Print Name][Title] [Title]篇3International Trade Contract AgreementThis International Trade Contract Agreement ("Agreement") is entered into by and between [Company Name], a company organized and existing under the laws of [Country], with its principal place of business at [Address], and [Company Name], a company organized and existing under the laws of [Country], with its principal place of business at [Address].1. Definitions1.1 "Buyer" means [Company Name].1.2 "Seller" means [Company Name].1.3 "Goods" means the products and/or services to be bought and sold under this Agreement.2. Sale of Goods2.1 Seller agrees to sell, transfer, and deliver to Buyer, and Buyer agrees to purchase, accept, and pay for the Goods in the quantities and at the prices set forth in Exhibit A attached hereto.2.2 Seller shall deliver the Goods in accordance with the delivery schedule set forth in Exhibit B attached hereto.2.3 Buyer shall pay for the Goods in the manner and within the time frame set forth in Exhibit C attached hereto.3. Price3.1 The price of the Goods shall be [Price] per unit, as set forth in Exhibit A.3.2 Seller reserves the right to adjust the price of the Goods upon thirty (30) days' written notice to Buyer.4. Payment Terms4.1 Payment for the Goods shall be made in [Currency] by [Payment Method] within [Number] days of delivery of the Goods.4.2 Late payments shall accrue interest at a rate of [Percent] per month.5. Inspection and Acceptance5.1 Buyer shall inspect the Goods within [Number] days of delivery and shall notify Seller in writing of any defects or nonconformities.5.2 If Buyer fails to notify Seller of any defects or nonconformities within the specified time frame, the Goods shall be deemed accepted.6. Warranties6.1 Seller warrants that the Goods shall conform to the specifications set forth in Exhibit A and shall be free from defects in materials and workmanship.6.2 Seller shall remedy any defects or nonconformities in the Goods within a reasonable time frame at no additional cost to Buyer.7. Limitation of Liability7.1 Neither party shall be liable for any consequential, incidental, or punitive damages arising out of or in connection with this Agreement.7.2 The total liability of either party shall not exceed the total purchase price of the Goods under this Agreement.8. Governing Law8.1 This Agreement shall be governed by and construed in accordance with the laws of [Country].8.2 Any disputes arising out of or in connection with this Agreement shall be resolved through arbitration in [City] in accordance with the rules of the [Arbitration Association].9. Entire Agreement9.1 This Agreement constitutes the entire agreement between the parties with respect to the subject matter hereof and supersedes all prior agreements and understandings, whether written or oral.IN WITNESS WHEREOF, the parties hereto have caused this Agreement to be executed by their duly authorized representatives.[Company Name] [Company Name]By: __________________ By: __________________Title: ________________ Title: ________________Date: ________________ Date: ________________Exhibit A: Price ListExhibit B: Delivery ScheduleExhibit C: Payment Terms篇4International Trade Contract AgreementThis International Trade Contract Agreement ("Agreement") is entered into on [Date] by and between [Party A], a company incorporated under the laws of [Country], having its principalplace of business at [Address], and [Party B], a company incorporated under the laws of [Country], having its principal place of business at [Address], collectively referred to as the "Parties".1. Definitions1.1 "Goods" shall mean the products or items that are the subject of the trade between the Parties as outlined in this Agreement.1.2 "Delivery Date" shall mean the date on which the Goods are delivered to the specified location as agreed upon by the Parties.1.3 "Price" shall mean the amount to be paid by the Buyer to the Seller for the Goods as specified in this Agreement.2. Scope of Agreement2.1 The Seller agrees to sell and deliver the Goods to the Buyer in accordance with the terms and conditions of this Agreement.2.2 The Buyer agrees to purchase the Goods from the Seller in accordance with the terms and conditions of this Agreement.3. Terms of Sale3.1 The Seller shall deliver the Goods to the Buyer in accordance with the terms outlined in this Agreement.3.2 The Buyer shall pay the Price to the Seller for the Goods in accordance with the payment terms outlined in this Agreement.3.3 The Parties agree to abide by the International Chamber of Commerce's Incoterms rules for the delivery of the Goods.4. Delivery of Goods4.1 The Seller shall deliver the Goods to the Buyer at the specified location on the Delivery Date.4.2 The Buyer shall be responsible for all costs and expenses related to the transportation and delivery of the Goods.5. Price and Payment5.1 The Price for the Goods shall be [Amount] to be paid by the Buyer to the Seller in [Currency].5.2 Payment shall be made by the Buyer to the Seller in accordance with the payment terms outlined in this Agreement.6. Governing Law6.1 This Agreement shall be governed by and construed in accordance with the laws of [Country].6.2 Any disputes arising out of or in connection with this Agreement shall be resolved through arbitration in accordance with the rules of the International Chamber of Commerce.7. Miscellaneous7.1 This Agreement constitutes the entire agreement between the Parties with respect to the subject matter hereof and supersedes all prior agreements and understandings, whether written or oral.7.2 This Agreement may be amended or modified only by a written instrument signed by both Parties.IN WITNESS WHEREOF, the Parties hereto have executed this Agreement as of the date first above written.[Party A]By: _______________________Name: _____________________Title: ______________________[Party B]By: _______________________Name: _____________________Title: ______________________This International Trade Contract Agreement is effective as of the date first written above.Signature: _______________________篇5International Trade Contract AgreementThis International Trade Contract Agreement ("Agreement") is entered into on [Date] by and between [Seller], located at [Address] and [Buyer], located at [Address].1. Scope of AgreementThis Agreement covers the terms and conditions under which Seller agrees to sell and deliver certain goods to Buyer, and Buyer agrees to purchase and accept those goods.2. GoodsThe goods to be supplied under this Agreement include [Description of Goods], hereinafter referred to as the "Goods".The quantity, quality, and specifications of the Goods are as described in Exhibit A attached hereto.3. Price and Payment TermsThe price of the Goods shall be [Price] per unit. Payment terms shall be [Payment Terms], with a deposit of [Deposit Amount] due upon signing of this Agreement and the balance due upon delivery of the Goods.4. DeliverySeller shall deliver the Goods to Buyer's premises located at [Address] within [Delivery Timeframe] of receiving the deposit. Buyer shall be responsible for all shipping and handling costs associated with the delivery of the Goods.5. Inspection and AcceptanceBuyer shall have [Number] days from the date of delivery to inspect the Goods and notify Seller in writing of any defects or discrepancies. Seller shall have the opportunity to remedy any such defects or discrepancies, at its own expense, within [Number] days of receiving notice from Buyer.6. Risk of LossThe risk of loss or damage to the Goods shall pass from Seller to Buyer upon delivery of the Goods to Buyer's premises.7. Force MajeureNeither party shall be liable for any failure to perform its obligations under this Agreement if such failure is caused by events beyond its reasonable control, including but not limited to acts of God, war, terrorism, natural disasters, and labor strikes.8. ConfidentialityBoth parties agree to keep confidential all information exchanged in connection with this Agreement, including but not limited to pricing, product specifications, and other proprietary information.9. Governing Law and Dispute ResolutionThis Agreement shall be governed by the laws of [Country]. Any dispute arising out of or relating to this Agreement shall be resolved through arbitration in accordance with the rules of the [Arbitration Association].10. Entire AgreementThis Agreement constitutes the entire agreement between the parties with respect to the sale and purchase of the Goodsand supersedes all prior agreements, understandings, and negotiations, whether written or oral.IN WITNESS WHEREOF, the parties hereto have executed this Agreement as of the date first above written.[Seller]Name: [Name]Title: [Title]Date: [Date][Buyer]Name: [Name]Title: [Title]Date: [Date]。
外贸合同范本英文3篇
外贸合同范本英文3篇篇1International Trading ContractThis contract is made on [Date] between [Company Name 1, the Seller], whose registered office is located at [Address 1], and [Company Name 2, the Buyer], whose registered office is located at [Address 2], in connection with the sale of the following products:Product Description:The Seller shall supply, and the Buyer shall purchase, the goods specified below:* Product Name: [Name of Product]* Quantity: [Quantity of Product]* Unit Price: [Unit Price]* Total Value: [Total Value of Contract]* Quality/Specification: [Detailed Description of Quality and Specification]* Delivery Date: [Scheduled Delivery Date]Terms of Delivery:1. The Seller shall deliver the goods FOB (Free On Board) at the Seller's port of [Port Name].2. The Seller shall inform the Buyer of the expected date of shipment and provide necessary shipping documents.3. The goods shall be properly packed and marked with correct identification of the contents.4. The Buyer shall arrange customs clearance and take delivery of the goods at the port of destination.Terms of Payment:1. The Buyer shall make a deposit payment of [Percentage] upon signing this contract.2. The balance payment shall be made upon receipt of the shipping documents and confirmation of arrival of the goods at the port of destination.3. All payments shall be made in [Currency].Quality Inspection and Warranty:1. The Seller guarantees that the goods shall be in conformity with the contracted quality specifications.2. The Seller shall provide a quality certificate or guarantee to authenticate the quality of the goods.3. In case of any discrepancy in quality, the Buyer shall notify the Seller within [Number of Days] days upon arrival of the goods for necessary adjustments or replacement.Force Majeure:Confidentiality:Both parties shall keep all information related to this contract confidential and not disclose it to any third party without the prior written consent of the other party.Disputes Resolution:Any disputes arising from or in connection with this contract shall be settled through friendly negotiation between both parties. If no settlement can be reached, either party may submit the dispute to [Arbitration Institution] for arbitration in accordance with its rules.Miscellaneous:Signed by:Seller: _____________________ Date: _________Buyer: _____________________ Date: _________注意：本合同仅为范本，实际使用时应根据具体情况进行修改。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
CONTRACT NO : THE BUYERS:ADDRESS:TEL:FAX: This Con tract is made by and betwee n the Buyers and the Sellers, whereby theBuyers agree to buy and the Sellers agree to sell the un der men ti oned commodityaccord ing to the terms and con diti ons stipulated below:1. COMMODITY:2. COUNTRY AND MANUFACTURERS:3. PACKING:To be packed in standard airway packing. The Sellers shall be liable for any damageof the commodity and expe nses in curred on acco unt of improper pack ing and forany rust attributable to in adequate or improper protective measures take n bythe sellers in regard to the pack ing.4. SHIPPING MARK:The Sellers shall mark on each package with fadeless paint the package number,gross weight, net weight, measurement and the wordings: "KEEP AWAY FROM MOISTURE""HANDLE WITH CARE" "THIS SIDE UP" etc. and the shipp ing mark:5. TIME OF SHIPMENT :6. PORT OF SHIPMENT :DATE: THE SELLERS: ADDRESS: TEL: FAX:7. PORT OF DESTINATION :& INSURANCE : To be covered by sellers for 110% invoice value against All Risks.9. PAYMENT : The buyer open an irrevocable 100% L/C at sight in favor of seller10. DOCUMENTS:(1) . Full set of Air waybill in original showing “ FreightPrepaid ”and consigned to applicant.(2) . Invoice in three copies.(3) . Packing list in three copies issued by the Sellers.(4) . Certificate of Quality issued by the Sellers.(5) . Insurance Policy.(6) . Certificate of origin issued by the Sellers.(7) . Manufacturer 's certified copy of fax dispatched to the applicant within 24 hours after shipment advisingflight No., B/L No., shipment date, quantity, Gross weight, Net weight, and value of shipment.(8) . The seller 'Cesrtificate and waybill certifying that extra documents have been dispatched according to the contract terms by express airmail.(9) . Certificate of No Wooden Packing or Certificate of Fumigation. In addition, the Sellers shall, within three days after shipment, send by express airmail one extra sets of the aforesaid documents directly to the Buyers.11. SHIPMENT:The Sellers shall ship the goods within the shipment time from the port of shipment to the destination. Transshipment is allowed. Partial shipment is not allowed.12. SHIPPING ADVICE:The sellers shall, immediately upon the completion of the loading of the goods, advise by fax the buyers of the Contract No., commodity, quantity, invoiced value, gross weight, name of vessel and date of delivery etc. In case due to the sellers not having faxed in time, all losses caused shall be borne by the sellers.13. GUARANTEE OF QUALITY:The Sellers guarantee that the Commodity hereof is made of the best materials with first class workmanship, brand new and unused, and complies in all respects with the quality andspecification stipulated in this Contract. The guarantee period shall be 12 months counting from the date of signing the Acceptance Report of this machine at the end-user's site. 14. CLAIMS:Within 90 days after the arrival of the goods at destination, should the quality, specification, or quantity be found in unconformity with the stipulations of the Contract except those claims for which the insurance company or not the owners of the vessel are liable, the Buyers shall, on the strength of the Inspection Certificate issued by the State Administration for Entry-Exit Inspection and Quarantine of P.R.C. or the site inspection report issued by the seller ' s engineer, have the right to claim foreplacement with new goods, or for compensation, and all expenses (such as inspection charges, freight for returning the goods and for sending the replacement, insurance premium, storage and loading and unloading charges etc.) shall be borne by the Sellers. As regards quality, the Sellers shall guaranteethat if within 12 months from the date of signing the acceptance report of this machine, damages occur in the course of operation by reason of inferior quality, bad workmanship or the use of inferior materials, the Buyers shall immediately notify the Sellers in writing and put forward a claim supported by Inspection Certificate issued by the State Administration for Entry-Exit Inspection and Quarantine of P.R.C. .The Certificate so issued shall be accepted as the base of a claim. The Sellers, in accordance with the Buyers' claim shall be responsible for the immediate elimination of the defect(s), complete or partial replacement of the commodity or shall devaluate the commodity according to the state of defect(s), . If the Sellers fail to answer the Buyers within one month after receipt of the aforesaid claim, the claim shall be reckoned as having been accepted by the Sellers.15. FORCE MAJEURE:The Sellers shall not be held responsible for the delay in shipment or non-delivery of the goods due to Force Majeure, which might occur during the process of manufacturing or in the course of loading or transit. The Sellers shall advise the Buyers immediately of the occurrence mentioned above and within fourteen days thereafter, the Sellers shall send by airmail to theBuyers for their acceptance a certificate of the accident issued by the Competent Government Authorities where theaccident occurs as evidence thereof. Under such circumstances the Sellers, however, are still under the obligation to take all necessary measures to hasten the delivery of the goods. In case the accident lasts for more than 10 weeks, the Buyers shall have the right to cancel the Contract.16. LATE DELIVERY AND PENALTY:Should the Sellers fail to make delivery on time as stipulated in the Contract, with exception of Force Majeure causes specified in Clause 15 of this Contract. The Buyers shall agree to postpone the delivery on condition that the Sellers agree to pay a penalty which shall be deducted by the paying bank from the payment. The Penalty, however, shall not exceed 5% of the total value of the goods involved in the late delivery. The rate of penalty is charged at 0.5% for every seven days. Odd days less than seven days should be counted as seven days. In case the Sellers fail to make delivery ten weeks later than the time of shipment stipulated in the Contract, the Buyers shall have the right to cancel the contract and the Sellers, in spite the cancellation, shall still pay the aforesaid penalty to the Buyers without delay.17. ARBITRATION:Any dispute arising from or in connection with this Contract shall be submitted to China International Economic and Trade Arbitration Commission for arbitration which shall be conducted in accordance with the Commission's arbitration rules in effect at the time of applying for arbitration. The arbitral award is final and binding upon both partied. Arbitration fee shall be borne by the losing party.18. BANK CHARGES: All bank charges outside China will be on the account of the Sellers.19.OTHER: This contract signed in four copies, the seller holds two copy and the buyer hold two copies.打开高考作文思路的六把金钥匙不少同学拿到作文题,常常大脑中一片空白,什么也想不起来.这是没有打开作文思路所致. 其实, 只要我们讲究方法, 审题立意关也就自然容易攻克 , 写作材料也就会纷至沓来, 如此,又怎么会写不好作文呢? 这里,我送给大家迅速打开作文思路的六把金钥匙.为说明这些方法的适用性 ,我结合过去的高考题作一解说 . 一,置换法 1.如果所给的作文题目 , 话题或材料是借喻性质的, 那么这时就可使用本体去置换喻体 . 如山东高考作文题 : 请以 "春来草自青 "为话题 ,写一篇不少于 800 字的文章 . 要求:①自拟题目•②自定立意•③除诗歌外，文体不限.④文体特征鲜明.命题人给了我们比喻的喻体 ,本体呢,思考可知道"春"的本体可以是信心 ,可以是毅力,可以是机遇 ,也可以是改革 ,是友谊,是爱心,是互助 ,是合作,是诚信, 等等. "草自青"的本体可以是欣欣向荣的局面 ,可以是辉煌的成功 ,也可以是双赢的结果 ,等等.我们展开联想 ,用一个又一个的本体去置换喻体,写什么的问题也就立马解决了 . 2.如果所给的作文题目或话题中的相关词语具有多义性 ,那么这时可用具有单一语义的词语置换具有多义的词语 .例如重庆高考作文题 : 《现代汉语词典》对 "自然"的释义有:①自然界•②自由发展；不经人力干预•③不勉强；不局促;不呆板.……请以"在自然中生活"为题目，写一篇文章.要求①立意自定;②除诗歌外，文体不限；③不少于800字;④不要套作，不得抄袭.以 "在自然中生活 "为题目 , "自然"怎么理解?这是立意的关键 .命题人想我们之所想,给了我们三个义项进行诠释 .我们只要用其中的一个义项去置换"自然" ,那么也就容易迅速立意 ,打开思路.如果"自然"是指自然界,那么"在自然中生活 " ,也就是在自然界中生活,这样我们可以谈环保等.如果"自然"是指自由发展 ,不经人力干预 ,那么"在自然中生活" ,也就是在自由发展中生活 ,这样我们可以谈教育中的张扬 ,发展个性等.如果"自然"是指不勉强 ,不局促 ,不呆板 ,那么该如何理解呢 ?我们可以通过造句的方式来看一看:态度很自然;他是初次演出,但演得挺自然.这么说来, "在自然中生活" ,也就是大大方方, 也就是凡事能够深入进去融入其中. 明白了这些, 我们谈什么 , 也就一目了然了 . 3. 如果所给的作文题中含有代词 ,那么这时可用代词所代的事物去置换作文题中的代词.例如上海高考作文题 : 平常大家关注更多的也许是"我们" ,如果把视线转向 "他们" ,你会看到什么 ,又会想到什么 ?请以" 他们"为题 ,写一篇文章 . 要求:(1)不少于 800 字.(2)不要写成诗歌 .(3) 不得透露个人相关信息 . 世界就是由 "我们"与"他们"组成的 ,心中如果只有"我们 " ,自然世界是不完整的 . 遗憾的是 , 现在只关注自己的人太多了, 无论何时何地 , 都是以自我为中心 , 哪里还有他人 ? 这样的世界 ,又怎么会是一个和谐的世界 .我们把视线转向 "他们 " ,会看到什么?会看到贫穷,会看到富贵 ,会看到不公,会看到进步 ,会看到文明 ,等等 .会想到什么 ?会想到共同富裕 ,会想到平等 ,会想到感恩 ,会想到正义等. "他们"是谁?可以是农民工 ,可以是干部子弟 ,可以是下岗工人 , 可以是一掷千金的大款 ,可以是沿街乞讨的老人 ,等等.这么一置换 ,自然也就打开了思路 . 二,补充法所谓补充法 , 是指通过给标题或话题补出相关的句子成分来打开思路的方法 . 例如安徽高考作文题 : 请以"带着感动出发 "为题,写一篇不少于 800 字的文章 . 要求 :①立意自定•②文体自选•③不得抄袭，不得套作•④不得透露个人相关信息.⑤书写规范,正确使用标点符号 . 打开思路,写好"带着感动出发" ,需要思考三个问题.一是谁带着感动出发 .也就是补出标题的主语 ,可以是你 (你们）,可以是我（我们）,可以是他（他们）.二是什么样的感动 , 或者说是为什么感动 .联系实际 ,汶川大地震中 ,老师舍生救学生 ,我们为之感动 ;救援人员不怕疲劳 ,日夜奋战 ,我们为之感动 ;群众排队捐款 ,献血 ,我们为之感动.具体到个人 , 温总理第一时间在第一线指挥 ,我们感动;民警蒋小娟为灾民的孩子喂奶 ,我们感动 .让人感动的原因很多 ,让人感动的事例很多 .三是带着感动出发的结果 .带着感动出发 ,其结果将产生更多的感动 ,从而使更多的人带着感动出发 ! 再如广东高考作文题 : 请以 "不要轻易说 '不' "为题写一篇文章 . 要求 :①除诗歌之外 ,文体不限;②不少于800字.可以通过给标题补充状语的方法来打开思路.不要轻易说 "不" ,不是不能说 "不" ,而是不要轻易说 .很多时候我们可以策略一些 ,这并不是要接受 ,认可,轻易说 "不"的结果, 往往使我们受到不必要的伤害 .比如面对同事 ,同学,朋友,家人的正当请求 ,不假思索脱口而出的 "不" ,往往伤害了他们的自尊心 ,拉大了与他们的距离 ,使双方变得越来越疏远 . 不要轻易说 "不" ,是智慧的表现 ,是道德的要求 . 明白了这些 ,我们的立意 ,选材也就有了取舍的空间 ,写出与众不同的好文章 ,也就成了一件容易的事 . 再如浙江高考作文题 : 阅读下面的文字 ,根据要求作文. 都市和乡村,是我们栖居的空间; 都市生活和乡村生活,是我们平凡的生活.当我们从平凡中回望时 ,每个人都会有不同的感触和期待 . 请以 "触摸都市 "或"感受乡村 "为题,写一篇作文 ,可讲述你自己或身边的故事 ,抒发你的真情实感 ,也可阐明你的思想观点 .【注意】①立意自定，角度自选•②除诗歌外，文体不限•③不少于800 字•④不得抄袭.无论是"触摸都市"中的"触摸"，还是"感受乡村"中的。