TFS-K34半导体指纹门锁应用模块手册
达南锁通用模块V3用户指南说明书
Universal Module V3 User guideContentsProduct information page 3 T echnical specifications page 4 Wiring diagram page 5 Wiring diagramDoor strike / Magnetic door lock page 6 Installation page 7 Setup page 8-9 Remote access/Integration page 10 Support page 11Product information 3/12 The Danalock Universal module is a device for controlling all 12-24V powered commercially available locking mechanisms; door strikes, electromechanical or magnetic locks, gates etc.The module works in parallel with what is already installed or in any new installation.The module has two relay outputs and one power output. The relays or the power-output can be controlled remotely with the Danalock app via Android (from version 4.4.4) and iOS (from iOS 9.0 and iPhone 4S) smartphones. The relay is both Bluetooth Low Energy 4.0 and/or Z-Wave driven.Relay modeThe two relays can be operated either parallel or separately. The relays are working for a desired time (1-180 sec.) or permanent when activated. The activation for the relays can be delayed for relay 2 after activating relay 1. The two relays can be setup individually for permanent activation or for a desired time.T echnical specifications 4/12 Operating voltage range 12-24V DC, 12-24V ACMax input (at 24V) 100mA Number of relays 2 Type of relays Potential-freecontacts (NO/NC) Max AC power 1A at 12V Max AC current 1A at 12V Max relay voltage 48 VWireless communication Bluetooth 4.0LE/Z-Wave Plus (optional) Bluetooth range 5-10 metersWiring diagram 5/12ellowWiring diagram - Magnetic door lock 6/12BlackGrey Power input 12-24V AC/DC 1 ampGrey 12/24 in White 12/24 inBrown GroundWhite Ground input 12-24V AC/DC 1 amp Red Yellow Green Relay 2: Normally openViolet Relay 2: Normally closedBlue Relay 2: CommenWiring diagram - Door strike7/12Grey 12/24 in White 12/24 inInstallation 8/12 1. Mounting instructionConnect the Universal Module to the relevant motor drive while considering the wiring diagram.Note!Please make sure to connect the Universal Module to a smartphone during installation. As soon as you are registered as owner, no one else is able to control the door/gate, and it is only you who can grant other users access.2. Connect to the smartphoneT o connect the Module to a smartphone, please follow the Danalock App User Guide on:https:///?page_id=2894When installing the Module you will be asked to set the Relay time. In the User guide for the motorized door lock you will find the recommended time (pulse = 1sec). Per default, the Universal Module will switch off after 1 sec.Note!The Relay time can be changed under settings at any time.User Guide 9/12Y ou find the updated version of the Danalock App User Guide under:https:///?page_id=2894Among other things, the guide will show you how to share access. If you like to change owner/administrator of the Module, you have to delete the Module from the app before connecting it to a new owner.Note!Please only delete the Module from the keychain when in Bluetooth range of the Module. If you are not in Bluetooth range, you will have to reset (see “T ouch button commands) it by pressing the button on the Module. If the Module is a built-in solution, a reset can cause additional charges from eg. a locksmith.T ouch button commands 10/12 Y ou find the gold-colored touch button in one corner of the circuit board. One short press switches the Relay off. Holding down/pressing the touch button will trigger the following commands:1 flash switches the relays off.2 flashes puts the Module inZ-Wave inclusion mode.5 flashes resets the key.10 flashes means a factory resetof all key and relay settings.Remote access/Integration 11/12DanabridgeThe Universal Module is only accessible when the user is in Bluetooth range. T o gain remote access, you can use a spare smartphone or tablet: https:///?page_id=2981Z-WaveThe Danalock Universal Module with Z-Wave is compatible with a long list of gateways.Read more about it here:https:///?page_id=2597Support 12/12You will find a list with frequently asked questions here: https:///?page_id=3417Please write or call us in case of any questions:+0045 42428122Poly-control ApSGammel Stillingvej 427 C, 8462 Harlev - DK*************************************+45 4242 8122。
密码锁控制说明书
单片机课程设计报告课题名称：密码锁控制学院：机电汽车工程学院班级：机101-1小组成员：指导老师：目录第一章引言 (3)第二章课程设计任务书 (3)一、任务要求 (3)二、单片机概述 (4)第三章电路原理分析与设计…………………………………………11一、硬件设计思想…………………………………………………11二、部分硬件方案论述……………………………………………111 键盘输入单元 (11)2 显示单元 (13)3 报警电路模块 (17)4 晶振电路模块 (17)5 复位电路模块 (18)6 掉电存储单元 (19)7 总框图设计与程序流程图 (20)第四章程序设计………………………………………………………22第五章调试连接与测试………………………………………………43第六章小结……………………………………………………………43第七章参考文献………………………………………………………43第一章引言单片机自二十世纪七十年代问世以来，以其极高的性能价格比受到人们的重视和关注，应用广泛，发展快。
由于其的优点多而突出，所以其的应用领域极广，几乎到了无孔不入的地步。
在我国广泛的应用于工业自动化控制、自动检测、智能仪表、智能家用电器、航空航天系统和国防军事、尖端武器等各个方面。
可以采用软硬件结合的办法提高系统的性能的控制技术为微控技术。
LCD 液晶显示器是Liquid Crystal Display 的简称，是20世纪70年代初发展起来的一种液晶显示器。
随着技术的发展其的分辨率、屏幕发光颜色等进入批量化合实用化。
随着人们生活水平的提高，如何实现家庭防盗这一问题也变的尤其的突出，传统的机械锁由于其构造的简单，被撬的事件屡见不鲜，电子锁由于其保密性高，使用灵活性好，安全系数高，受到了广大用户的亲呢。
本系统由单片机系统、矩阵键盘、LCD显示和报警系统组成。
系统能完成开锁、报警、修改用户密码基本的密码锁的功能。
本文详细阐述了个模块的功能以及它们之间的联系。
EG4003微波红外感应处理芯片数据手册说明书
版本变更记录版本号日期描述V1.0 2020年11月03日EG4003数据手册初稿目录1. 特性 (1)2. 描述 (1)3. 应用领域 (1)4. 引脚 (2)4.1 引脚定义 (2)4.2 引脚描述 (2)5. 结构框图 (3)6. 典型应用电路 (3)6.1 EG4003典型应用电路图 (3)6.2 EG4003控制继电器应用电路图 (4)6.3 EG4003可重复触发+光敏电阻应用电路图 (4)6.4 EG4003可重复触发+光敏电阻微波方案应用电路图 (5)7. 电气特性 (5)7.1 极限参数 (5)7.2 典型参数 (6)8. 应用设计 (7)8.1 振荡器工作频率计算 (7)8.2 触发延时时间定时器和触发封锁时间定时器 (7)8.3 A端重复和不可重复触发功能 (8)8.4 Vc触发禁止端 (8)8.5 第一级运放增益设定 (9)9. 封装尺寸 (10)9.1 SOP8封装尺寸 (10)9.2 DFN8封装尺寸 (11)EG4003芯片数据手册V1.01. 特性⏹8引脚微波、红外感应专用芯片，外围电路简单，成本低⏹静态功耗小，3V工作电源时功耗小于45uA, 5V工作电源时功耗小于75uA,非常适合电池供电系统应用⏹高输入阻抗运算放大器，可与多种传感器匹配，进行信号与处理⏹双向鉴幅器，可有效抑制干扰⏹内置参考电压，供内部比较器和运放的参考电压⏹内设延时时间定时器和封锁时间定时器，改变振荡器频率即可设定定时延时时间⏹外围元器件少，只需配置第一级运放的增益和振荡器的RC器件即能可靠工作⏹工作电源+3V～+6V⏹封装形式： SOP8、DFN82. 描述EG4003是一款专为微波、红外信号放大及处理输出的数模混合专用芯片，内部集成了运算放大器、双门限电压比较器、参考电压源、延时时间定时器和封锁时间定时器及状态控制器等，专用于防盗报警系统、人体门控制装置、照明控制开关等场合。
EG4003电源工作电压为+3V～+6V，采用 COMS工艺数模混合相结合的集成电路，8个引脚数封装设计，降低了外围电路元件数和整体成本，节省了PCB板空间。
SFG R30X系列指纹识别模块用户手册
R30X X系列指纹识别模块SFG R30用户手册浙江圣非格科技有限公司二〇一〇年九月九日Ver1.11前言及声明感谢您使用浙江圣非格科技有限公司的R30X系列指纹识别模块，为了确保获得最佳使用效果，请仔细阅读手册，并妥善保管，以备后用。
本用户手册针对软、硬件应用开发工程师编写，包含模块功能、软硬件接口等内容。
因产品的不断升级和完善，模块和手册内容都有可能变更，恕不另行通知。
如需获取最新信息，请访问我公司网站（）。
我们已尽最大努力以保证本手册的准确性。
然而，如您有任何疑问或发现错误，可直接与我司或我司授权代理商联系，我们将十分感激。
下列文件包含圣非格科技有限公司的私有信息，在没有本公司书面许可的情况下，第三方不得使用或随意泄漏；当然，任何在没有授权、特殊条件、限制或告知的情况下对此信息的复制和擅自修改都是侵权行为。
所有产品的售出都受制于本公司在订购承认书里的销售条款和条件。
本公司利用测试、工具、质量控制等技术手段来支持产品的相关性能符合所需规格的一定程度的保证。
除了明确的政府书面要求外，没必要执行每款产品的所有参数测试。
联系我们：地址：浙江杭州莫干山路741号电话：88032199目录一、概述-------------------------------------------------------------------------------------------------------3-1.应用范围-----------------------------------------------------------------------------------------------3-2.主要技术指标-----------------------------------------------------------------------------------------4-二、硬件接口-------------------------------------------------------------------------------------------------5-1.外部接口尺寸图--------------------------------------------------------------------------------------5-2.串行通讯-----------------------------------------------------------------------------------------------7-B通讯----------------------------------------------------------------------------------------------7-三、软件开发指南--------------------------------------------------------------------------------------------8-1.上电延时时间-----------------------------------------------------------------------------------------8-2.系统资源-----------------------------------------------------------------------------------------------8-3.通讯协议---------------------------------------------------------------------------------------------12-四、模块指令系统-----------------------------------------------------------------------------------------16-五、功能实现示例-----------------------------------------------------------------------------------------43-一、概述R30X系列指纹识别模块是圣非格科技有限公司2010年推出的最新产品，采用了最先进的指纹传感器和高性能的DSP处理器，内嵌完整的指纹识别算法和协议。
CSS34非接触电子传感器说明书
Features &Benefits•Non-contact sensing …for long term reliability.•Four different actuating surfaces …for a variety of mounting options.•Sealed for moisture protection …ideal for most hostile environments.Meets both IP65and IP67requirements.•Tamper-resistant …frequency-matched sensor and actuator required for operation.•Integral LED diagnostic indicators …facilitate easy installation and troubleshooting.•Integral self-monitoring (CSS34),feedback and reset functions (CSS34F0/F1)…satisfy requirements of PL e per EN ISO 13849-1,or Control Category 4per EN 954-1,and may remove need for safety control module.*See note below.•Designed for “daisy chaining”…up to 31devices,max 200m,can be wired in series without detriment to safety performance level.•Dual PNP 500mA safety outputs …for application versatility.•Integrated mounting plate included …allows for easy and accurate alignment of sensor and actuator.DescriptionThe CSS 34non-contact,electronic safety sensor is designed for application in safety circuits and is used for monitoring the posi-tion of movable safety guards.In this application the safety sen-sor monitors the closed position of hinged,sliding or removable guards with the aid of a coded actuator.The CSS 34Safety Sensor fulfills the requirements for proximity devices with defined behavior under fault conditions according to EN 60947-5-3with the classification PDF-M (self-monitoring).The CSS 34Safety Sensor and CST 34actuator are a matched pair.As the actuator approaches the sensor,the sensor excites the actuator at a predetermined resonant frequency and the reads back the actuator oscillation.The sensor evaluates the actuator frequency and its distance to the actuator.Identification of the actuator is interpreted as a closed guard by the safety sensor,and the safety outputs are enabled.The safety sensor is a dual channel design with two short-circuit proof,safe PNP outputs,each of which can switch up to 250mA.Due to continuous internal function tests and the moni-toring of the safety outputs,up to 31CSS 34Safety Sensors can be wired in series without detriment to the safety performance level/control category (PL e per EN ISO 13849-1,control catego-ry 4per EN 954-1).The models CSS34F0/F1have an integrated feedback option that control positive-guided contactors/relays without the need for a downstream safety control module.The integrated start/restart interlock feature provides an input for a reset pushbutton with edge detection,or without edge detection (suitable for automatic reset).The CSS34F0/F1models are suitable as individual or end devices in a series wired chain of standard CSS34sensors to replace a safety control module.The CSS34F0/F1system,com-prising the sensor,monitored relay and the reset switch,meets the requirements of PL e per EN ISO 13849-1,or ControlCategory 4per EN954-1,provided that positive guided contac-tors/relays are used.Typical ApplicationsThe sealed,compact units are ideal for use on movablemachine guards where multiple guard monitoring on a machine is required,and/or where hostile environments exist.T ypical applications include printing machinery,textile machinery,paperconverting equipment,material handling systems,pack-aging machinery,chemical processing equipment,andwoodworkingmachinery.*Note:A safety control module may be required for resetfunction and/or feedback monitoring functions,as well as increased output current requirements.SERIES CSS 34Pulse-Echo Based Compact Non-Contact Safety Sensor Sensors available with a serial diagnostic cable,for use with various field bus protocols.Please see page 204for SD Gateways.Note:See page 94for M12,9pin connector cables.AVAILABLE MODELS(Actuators OrderedSeparately)188SERIES CSS34TECHNICAL DATADIMENSIONS189190SERIES CSS 34TECHNICAL DATASWITCHING DISTANCESThe actuating curves represent the points at which the CSS 34sensor switches on and off upon the approach of the actuator.Legend S Switching Distance V ,V1,V2Possible misalignment (see drawings at right)S ON Switch-on point S OFF Switch-off point S H Hysteresis area S H =S OFF –S ONS ao Assured operation point S arAssured release point(according to EN60947-5-3)Minimum distance between two sensor sets:approximately 100mmFunction table of visual diagnostic LEDElectronic Diagnostic function of CSS34or CSS34F with conventional diagnostic outputSix different fault conditions are signalledby the diagnostic LEDflashing with predefined pulse sequence or with continuous red light.*Only for CSS34F0/F1with feedbackcircuit 1The sensor waits for a signal from the feedback circuit:F0–Close feedback circuitF1–Trailing edge on feedbackcircuitActuation From Side Actuation From TopSideways MisalignmentHorizontal:Max ±10mm (V2)Vertical:Max ±18mm (V1)Top MisalignmentHorizontal:Max ±8.5mm (V)191SERIES CSS 34WIRING EXAMPLE 1SERIES CONNECTION OF CSS 34Series wiring with single diagnostic output The supply voltage is wired to both safety inputs of the last sensor of the chain (starting from the safety controller).The safety outputs of the first sensor are wired to the safety controller.The sensor chain can be built up over a length of two hundred meters.Sensors used:Safety Sensor CSS14-34-SDML:This sensor has one output cable.The output of the first sensor is wired into the input of the next sensor and so on.192SERIES CSS 34WIRING EXAMPLE 2SERIES CONNECTION OF CSS34AND CSS34F1Wiring example for series-wiring of the CSS 34and CSS 34F1safety sensors with conventional diagnostic outputs In a safety chain of multiple sensors,only the first device can be a sensor of the CSS 34F type.All other components of the chain must be of the default type CSS 34,up to a maximum length of 200m.The CSS 34F1safety sensor enables a direct control of the contactor or relay.The internal monitoring module of the CSS 34F1version monitors the trailing edge of the reset button in addition to the feedback contacts.The sensor is switched on when the button is released.It can be used for manual reset on safety guards with accessible protection field.The protected field must be designed in such manner that a single reset but-ton can beused.193SERIES CSS 34WIRING EXAMPLE 3CONNECTION OF CSS34F0WITH RELAYS TO SWITCH HIGH-CAPACITY LOADSWiring example for the CSS 34F0safety sensors with conventional diagnostic output with auxiliary relay for controlling high-capacity contactorsAdditional auxiliary relays are used when the capacity ofthe safety outputs of the sensor is insufficient to enable direct control of the contactors or to switch,e.g.,from 24V DC to 230V AC.The NC contacts of the load-switching contactors aremonitored.。
雅尔德门锁及硬件产品说明书
Collection SpecificationsYale Locks & Hardware225 Episcopal Road 1-855-213-5841Berlin, CT 06037 USA ********************Note: Replace middle characters with C42 for Control4 and CR2 for Crestron. Must be ordered through authorized dealer. Assure Lock Keypad Deadbolt YRD216Assure Lock SL YRD256Upgrade with a Yale Smart ModuleAssure Lock Touchscreen Deadbolt YRD226Assure Lock ®ModelsLose Your Keys. For Good.®Yale has an Assure Lock designed just for you including 100% key free models, keyed touchscreen and tactile push button keypads. The new Assure Lock SL is the slimmest electronic lock on the market.Each Assure Lock can be upgraded with your choice of Yale Smart Module. Available modules include:• Z-Wave Plus • Zigbee• Connected by August (for WiFi and Bluetooth) • Control4 • CrestronAvailable FinishesPolished Oil Rubbed Satin Black Brass Bronze Nickel Suede** Not available for YRD216Available through Control4 or Crestron and certified dealers.Assure Lock Assure Lock Assure Lock SL Push Button T ouchscreen YRD256YRD216 YRD226Standalone Satin Nickel YRD216-NR-619 YRD226-NR-619 YRD256-NR-619Polished Brass YRD216-NR-605 YRD226-NR-605 YRD256-NR-605 Oil Rubbed Bronze YRD216-NR-0B P YRD226-NR-0B P YRD256-NR-0B PBlack SuedeYRD226-NR-BS P YRD256-NR-BS PZ-Wave Plus Satin Nickel YRD216-ZW2-619 YRD226-ZW2-619 YRD256-ZW2-619Polished Brass YRD216-ZW2-605 YRD226-ZW2-605 YRD256-ZW2-605 Oil Rubbed Bronze YRD216-ZW2-0B P YRD226-ZW2-0B P YRD256-ZW2-0B P Black SuedeYRD226-ZW2-BS P YRD256-ZW2-BS P Zigbee Satin Nickel YRD216-HA2-619 YRD226-HA2-619 YRD256-HA2-619Polished Brass YRD216-HA2-605 YRD226-HA2-605 YRD256-HA2-605 Oil Rubbed Bronze YRD216-HA2-0B P YRD226-HA2-0B P YRD256-HA2-0B PBlack SuedeYRD226-HA2-BS PYRD256-HA2-BS PConnected by August Satin Nickel YRD216-CBA-619 YRD226-CBA-619 YRD256-CBA-619Polished Brass YRD216-CBA-605 YRD226-CBA-605 YRD256-CBA-605 Oil Rubbed Bronze YRD216-CBA-0B P YRD226-CBA-0B P YRD256-CBA-0B PBlack SuedeYRD226-CBA-BS P YRD256-CBA-BS PProduct NumbersYale Locks & Hardware 225 Episcopal Road 1-855-213-5841 Berlin, CT 06037 USA ********************Available through Control4 or Crestron and certified dealers.Works with Your Smart Home* Upgrade any Assure Lock to integrate seamlessly with your smart home or alarm system. Just plug a Yale Smart Module into the slot above the lock’s battery compartment. Modules can be sold separately or included with the lock.• Monitor, lock and unlock from anywhere• View access historyof who’s entered your home • Receive notifications on your smartphone• Set schedules for your lock • Create entry codes for friends and family from your smartphone • Check to see if your door is locked, from anywhere • Works with voice activated solutions like Amazon Alexa(some modules require compatible hub for voice integration.) * Features may vary with integration system.Connected by August Features:• Unlocks automatically as you approach via Bluetooth• Includes Wi-Fi bridge for access anywhere • Control and monitor with August app• Share access for an hour, a day or forever• Works with your favorite voice assistants (Amazon Alexa,Google Assistant and Siri)• Integrates with Airbnb, Homeaway, Simplisafe, Savant and more.T amper-Proof ModelThe Assure Lock SL is 100% key free so it can’t be picked and there are no keys to lose. Quiet DeadboltQuiet motor with tapered deadbolt that accommodates for misaligned doors Simple InstallationReplaces existing deadbolt with just a screwdriver.Fits on standard doors.Backlit KeypadKeypad wakes with a touch and has numbers that won’t wear off.Share AccessManage entry codes orvirtual keys (with a smart home system) for people you trust. Optional SettingsCustomize auto re-lock, privacy mode and tamper alarms within the lock settings.Voice Assistance T ouchscreen models guide you through the menu in 3 languages.Locks Automatically Enable Auto Relock to ensure your door is always locked.Battery Back-Up Never lose power,key free models can be energized with a 9V battery.Available Smart Modulesconnected byAssure Lock®Features and SpecificationsT echnical SupportVisit: /Support Call: 1-855-213-5841 | 24/7Email:********************Customer ServiceCall: 1-800-438-1951 | M-F 8am-4:30pm EST Email: S *******************Yale Locks & Hardware 225 Episcopal Road Berlin, CT 06037 USA T emperature RangeOutside T emperature Range -30ºC to 60ºC = -22ºF to 140ºF Inside T emperature Range -15ºC to 70ºC = 5ºF to 158ºF Battery T emperature Range -10ºC to 55ºC = 14ºF to 131ºF Storage T emperature Range -40ºC to 85ºC = -40ºF to 185ºF In the Box:• Yale Assure Lock• Deadbolt and Strike Plate • Mounting Hardware • 4 AA Batteries • Door T emplate • Installation Manual• Optional: Yale Smart Module or Connected by August KitDoor Specifications Face Bore 2 1/8"Edge Bore 1"Backset 2 3/8" or 2 3/4" (adjustable latch)Door Thickness 1 3/4" to 2 1/4" **1 3/8" requires special order thin door kit Strike 1 1/8" x 2 3/4"Strike Front Round Corner Keyway KW-1 5 Pin(keyed models come with 2 keys)Batteries4 AA Alkaline Batteries (Included)Handing Self-handingGrade T ested to: ANSI/BHMA Grade 2UL/cUL Functions are UL - cUL Fire Listed for use on fire doors having a rating up to and including 20 min. YRD216/226 require the optional part AYRD-FKIT -<finish> to be installed to meet this standard.Warrantyfor the original owner, one year warranty for electronics and lifetime limited warranty for finish and mechanical operation.Product MeasurementsYRD216Exterior: 1 3/16" L x 2 3/4" W x 5 3/16" H Interior: 2 1/8" L x 3" W x 6 7/8" H YRD226Exterior: 1 3/8" L x 2 3/4" W x 6 1/16" H Interior: 2 1/8" L x 3" W x 6 7/8" H YRD256Exterior: 11/16" L x 2 9/16" W x 3 9/16" H Interior: 2 1/8" L x 3" W x 6 7/8" HYale® ,Yale Real Living®, Assure Lock®, and Lose Your Keys. For Good.® are registered trademarks of Yale Security Inc., an ASSA ABLOY Group Company. Other products’ brand names may be trademarks or registered trademarks of their respective owners and are mentioned for reference purposes only. © Copyright 2020. Yale Security Inc., an ASSA ABLOY Group Company. All rightsreserved. Reproduction in whole or in part without the express written permission of Yale Security Inc. is prohibited. Apple®, iPhone®, iPad®, iPod touch® and Siri® are trademarks of Apple Inc., registered in the U.S. and other countries. HomeKit is a trademark of Apple Inc. Use of the Works with Apple HomeKit logo means that an electronic accessory has been designed to connect specifically to iPod touch, iPhone or iPad, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards.Download the free BIL T app for 3D,interactive installation tutorials.。
中控指纹考教材勤机使用说明书
8.2. 维护/设置................................................................................44 8.2.1 维护/设置 44 8.2.2 部门表 45 8.2.3 员工维护 47 8.2.4 管理员设置 58 8.2.5 时间段维护 62 8.2.6 班次管理 65
上海四景计算机信息科技有限公司
目录
1、使用须知..................................................................................................................... 1.1 用 BIOCLOCK 激活软件.........................................................2
155-4
1、使用须知
上海四景计算机信息科技有限公司
请不要将设备放在强光直照的地方，强光对指纹采集有着明显的影 响，会导致指纹验证无法通过。
夏天尽量不要在室外使用，考勤机工作的温度范围为 0-400C，长期 在室外使用，加上设备本身的发热，容易导致设备工作受到影响，反应 可能会变慢，通过率降低。如果必须在室外使用，建议采用遮阳伞和散 热设备。
155-1
上海四景计算机信息科技有限公司
4.1.2 语言 22 4.1.3 锁驱动 22 4.1.4 高级设置 22 4.2 电源管理.................................................................................. 23 4.3 通讯设置.................................................................................. 24 4.4 记录设置.................................................................................. 25 4.5 门禁功能设置.......................................................................... 26 4.5.1、时间段 的功能定义........................................................... 26 4.5.2、用户门禁设置..................................................................... 27 4.5.3、分组功能定义..................................................................... 28 4.5.4、开锁组合功能定义............................................................. 28 4.5.5、锁驱动时长......................................................................... 29 4.6 自动检测.................................................................................. 29
Cascade 35D Silgle-Douple Pallet Handler 部件手册说明书
Frame Mounting Group LC-1009338 Groupe Bâti et AccrochageRahmengruppe und AufhängungsgruppeRef.Qty.Partno.Description Bezeichnung Description 11793554Mounting plate LH Aufhängungsplatte links Platte d' accrochage gauche 21793337Mounting plate RH Aufhängungsplatte rechts Platte d' accrochage droite 32793560Frame extrusion Führungsträger Guide411009339Bar lower T rager unten Barre inférieur 1793561Bar upper T rager oben Barre supérieur 51783151Anchor bracket Aufhängungsplatte Support d' accrochage 61768809Capscrew Kopfschraube Vis a tête71681238Lockwasher Unterlegscheibe Rondelle81676649SS Cylinder Seitenschubzylinder Vérin de dépl. latéral92672018Bearing segment Gleitschiene Glissière102672726Cotter hairpin Bolzen Goupille111678528Pin clevis Bolzen Goupille121678528Pin clevis Bolzen Goupille132675957Hook Q.D.Schnellwechsel haken Crochet à montage rapide 144751515Capscrew Kopfschraube Vis a tête152678832Pin Bolzen Goupille162675958Guide Führung Guide171655268Patent plate Patentschild Collant182676650Bearing lower Untere Gleitschiene Glissière inférieur1927401Grease fitting Schmiernippel Engraisseur204668910Bearing Lager Glissière214668911Bearing Lager Glissière224667663Bearing Lager Glissière234793044Bearing Lager Glissière2412772299Capscrew Kopfschraube Vis a tête2512772313Washer Unterlegscheibe Rondelle262768934Rollpin Bolzen Goupille272769008Rollpin Bolzen Goupille2812204174Capscrew Kopfschraube Vis a tête294767614Capscrew Kopfschraube Vis a tête302793080Washer Unterlegscheibe Rondelle35D Silgle-Douple Pallet Handler2Cascade Parts ManualCascade Parts Manual335D Single-Double Pallet Handler35D Silgle-Douple Pallet Handler 4Cascade Parts ManualOuterForksFourches Extérieurs AußengabelnInner ForksFourches Intérieurs InnengabelnFork Group L-1011634Groupe Fourches GabelgruppeInnerForks Fourches Intérieurs InnengabelnRef.Qty.Partno.Description Bezeichnung Description31 1 1011635 Fork outer RH Außengabel rechts Fourche extérieur droit 32 1 1011636 Fork outer LH Außengabel links Fourche extérieur gauche 33 1 1011637 Fork inner RH Innengabel rechts Fourche intérieur droit 34 1 1011638 Fork inner LH Innengabel links Fourche intérieur gauche 35 1 794283 Fork hanger lower Gabelträger unten Barre fourches inférieur 361794282Fork hanger upper Gabelträger oben Barre fourches supérieur 374793725Spacer outer forks Distanzstück Außengabeln Entretoise fourches ext.384793726Spacer inner forksDistanzstück InnengabelnEntretoise fourches inf.3932793712Capscrew Kopfschraube Vis à tête 402789943Spacer Distanzstück Entretoise 412789944Spacer Distanzstück EntretoiseCascade Parts Manual 535D Single-Double Pallet HandlerArm Bar Groups 1009394Groupes Coulisses ArmträgergruppenRef.Qty.Part No.Description Bezeichnung Description42 2793736 T-bar assy Armträger Zusammenbau Ensemble coulisse 43 2 793736 T-bar assy Armträger Zusammenbau Ensemble coulisseValve Group LC 794277 Ensemble de ValveVentilgruppe(See drawing page 2 - Voir plan à page 2 - Siehe Zeichnung auf Blatt 2)Ref.Qty.Partno.Description Bezeichnung Description441793727Valve assy Ensemble de valve Ventilzusammnebau 451794278T ube Rohr T ube461794279T ube Rohr T ube471794280T ube Rohr T ube482763166Capscrew Kopfschraube Vis à tête492686119Washer Unterlegscheibe Rondelle503752554Connector Verschraubung Raccord512765721Connector Verschraubung Raccord523765493Connector Verschraubung Raccord531794281Hose Schlauch T uyau542602580O-Ring plug Stopfe Bouchon35D Silgle-Douple Pallet Handler6Cascade Parts ManualCascade Parts Manual 7Single-Double Pallet HandlerArm Cylinder GroupLC-793333Groupe vérin des bras Arm-Zylinder GruppeRef.Qty.Part No.Description Bezeichnung Description1770747Cylinder Zylinder Vérin12q 6510Cotter pin SplintGoupille fendue22q 667624Locking cap Sicherungskappe Dispositif de vérouillage 32q667625Nut MutterEcrou41413807Shell Zylinderrohr Corps de vérin 51415518Piston Kolben Piston61s 2716O-ring O-Ring Joint torique 71s 662450SealDichtung Joint82s 638245Nylon ring Nylon Ring Anneau nylon 91s 2722O-ringO-Ring Joint torique101s 615126Back-up ring StutzringJoint de protection 111667624Retainer Zylinderdeckel Bague de retenue 121s 661586Bearing Lagerring Roulement 131s 662448Seal Dichtung Joint 141s636853Wiper Abstreifer Racleur 151667623Nut MutterEcrou161413808Rod Kolbenstange Tige de vérin 171667626Washer Unterlegscheibe Rondelle181602580O-ring plugO-Ring StopfenBouchon à joint toriques Included in service kit / Inclus dans le kit de service / Enthalten im Dichtsatz 413800q Included in cyl. nut serv. kit/Incl. dans le kit de service des écrous du vérin/Enth. im Wartungssatz der Zyl. Mutter 668926Ref.Qty.Part No.Description BezeichnungDescription 672793333Cylinder Assembly Zylinder Zusammenbau Ensemble vérin35D Silgle-Douple Pallet Handler 8Cascade Parts ManualSideshift CylinderLC 676649Vérin de déplacement latéralSeitenschub ZylinderRef.Qty .Partno.Description BezeichnungDescription 81676649Cylinder AssemblyZylinder ZusammenbauEnsemble vérinRef.Qty .Partno.Description Bezeichnung Description 1676649Cylinder Zylinder Vérin 11553717Nut Mutter Ecrou 21636852Wiper Abstreifer Racleur 31553527Piston Kolben Piston 41●662456SealDichtung Joint51●649817Back up ring StutzringJoint de protect.61675550Washer Unterlegscheibe Rondelle71676776Shell Zylinderrohr Corps de vérin 81553530Rod Kolbenstange Tige de vérin 91●2789O-ringO-Ring Joint torique 101●615132Back-up ring StutzringJoint de protect.111553528RetainerZylinderdeckel Bague de retenue 121553688Retaining ring RingJoint de retenue 1317211Snapring Sicherungsring Circlips 141●662447SealDichtungJoint553866Service KitKit de ServiceDichtsatz● Included in Service Kit / Inclus dans le kit de service / Enthalten im DichtsatzScissors l atch Group L-1009395 KlinkegruppeGroupe CrochetRef.Qty.Partno.Description Bezeichnung Description1 1 1008767 L ink RH Lasche R. Connecteur D2 1 1008765 L ink LH Lasche L. Connecteur G3 1 1008770 L ink RH Lasche R. Connecteur D4 1 1008768 L ink LH Lasche L. Connecteur G51887012Spacer Distanzstuck Entretoise61883479Shoulder bolt Bolzen Vis72883480Bearing Lager Roulement82887013Shoulder bolt Bolzen Vis93887014Ring Ring Joint102887015Bushing Buchse Roulement113887016Circlip ring Ring Joint■ 2 1009399 S top block Anschlag Butée■4767810Capscrew Kopfschraube Vis à tête■4681473 Lockwasher Unterlegscheibe Rondelle■ Not shownCascade Parts Manual 9 35D Double Fork Postitioner。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
深圳市十指科技有限公司TFS-K34 指纹门锁专用模块声明 1．未经本公司许可，本手册的任何部分不得以任何方式复制。
2．为了您能正确使用本公司产品，并得到最佳性能和保证长久使用，请详细阅读本手册。
3．因技术发展的需要，本公司保留未经通告而变更本手册及产品性能指标的权利。
4.注意爱护是延长产品寿命的最好方法。
前言感谢您选择我公司出品的指纹锁应用模块! 指纹识别技术是依靠人体指纹特征进行身份验证的生物识别技术。
作为当今世界上 最先进可靠的指纹识别技术的结晶，指纹识别通过精准的光电成像系统对开启者指纹图 像进行采集，运用复杂的模式匹配算法，与原注册指纹进行比对，判断开启者身份，合 法身份确认后即可输出开锁信号。
本模块适用于开发指纹锁具、开发指纹柜体及开发指纹门禁系统等各类需要身份认证的 各类产品。
本用户手册适用于深圳市十指科技的 TFS-K34 型号的指纹识别模块。
我们深圳市十指科技公司是一家立足于指纹识别技术和应用模块的研发、 生产的专业公 司，我公司为了推动指纹锁具行业的发展，立足于自己指纹识别技术而推出的新一代高 性能、高速度、最优性价比的指纹锁具专用模块，型号：TFS-K34。
此模块由瑞典进口 FPC1011F 传感器、 高性能 DSP 处理器、 大容量 FLASH 和 CMOS 等芯 片构成，只要配合电子锁具外壳和锁芯，不需懂得指纹识别技术、不需要再次开发，只 要接上模块上的标准插头，就可以应用、集成成为高科技的指纹锁！实现产品价值快速 提升如有任何问题请按如下信息联系十指科技或与当地代理商！公司名称：深圳市十指科技有限公司 地址： 深圳市南山区西丽镇白芒区南 123 栋五楼 邮编：518055 联系人：陈先生 电话：0755-******** 手机：158******** 邮箱：tenfinger@QQ：513516415 MSN：szkj2008@贸易通：FY612 网址：深圳市十指科技有限公司 出品指纹门锁专用模块手册（K34）目前 目录言............................................................................................................................................. 2 录 .............................................................................................................................................. 3版权声明............................................................................................................................................. 4 第一部分 指纹模块介绍 ................................................................................................................. 5一．指纹识别核心技术特点 ........................................................................................................ 5 二、锁具功能 .............................................................................................................................. 5 三、技术参数 .............................................................................................................................. 6 三、模块接口说明....................................................................................................................... 7 四．尺寸图.................................................................................................................................. 8 第二部分 第三部分 模块成功集成应用锁体实例 ........................................................................................... 9 操作流程....................................................................................................................... 10一．正确的使用..................................................................................................................... 10 二．注意事项 ........................................................................................................................ 10 第一节 注册（添加）用户指纹................................................................................................... 11一．注册管理员指纹 ............................................................................................................. 11 二．注册普通用户指纹.......................................................................................................... 12 三．注册指纹的位置查询：................................................................................................... 12 第二节 删除用户指纹 ............................................................................................................... 13一．定位删除指纹： ............................................................................................................. 13 二．定位删除指定位置的指纹............................................................................................... 14 三．全部删除：删除所有的用户指纹.................................................................................... 14 第三节. 模块设定及操作 .............................................................................................................. 15 一．开锁................................................................................................................................ 15 二．通道锁功能（锁常开）................................................................................................... 15 三．限制开锁功能： ............................................................................................................. 15 四．反锁： ............................................................................................................................ 15 第四节 备用密码设置 ................................................................................................................. 16一．设置管理员密码 ............................................................................................................. 16 二．设置普通用户密码.......................................................................................................... 16 三．修改密码 ........................................................................................................................ 16第 3 页 共 16 页深圳市十指科技有限公司 出品指纹门锁专用模块手册（K34）版权声明本用户手册的所有版权为深圳市十指科技有限公司所有，严禁未经深圳市十指科技有 限公司书面授权的发布，复制和修改行为，皆视为侵权行为，深圳市十指科技有限公司 保留追究其责任的权利。