M9U1Project
索尼α7RⅢ产品介绍说明书
Key FeaturesWorld’s smallest lightest interchangeable lens full-frame camera 1Sony’s Exmor image sensor takes full advantage of the Full-frame format, but in a camera body less than half the size and weight of a full-frame DSLR.Full Frame 24.3 MP resolution with 14-bit RAW outputA whole new world of high-quality images are realized through the 24.3 MP effective 35 mm full-frame sensor, a normal sensor range of ISO 100 – 25600, and a sophisticated balance of high resolving power, gradation and low noise. The BIONZ ® X image processor enables up to 5 fps high-speed continuous shooting and 14-bit RAW image data recording.Fast Hybrid AF w/ phase-detection for DSLR-like focusing speedEnhanced Fast Hybrid auto focus combines speedy phase-detection AF with highly accurate contrast-detection AF , which has been accelerated through a new Spatial Object Detection algorithm, to achieve among the fastest autofocusing performance of any full-frame camera. First, phase-detection AF with 117 densely placed phase-detection AF points 3 swiftly and efficiently moves the lens to bring the subject nearly into focus. Then contrast-detection AF with wide AF coverage fine-tunes the focusing in the blink of an eye.Fast Intelligent AF for responsive, accurate, and greater operability with full frame sensorThe high-speed image processing engine and improved algorithms combine with optimized image sensor read-out speed to achieve ultra high-speed AF despite the use of a full-frame sensor.New Eye AF controlEven when capturing a subject partially turned away from the camera with a shallow depth of field, the face will be sharply focused thanks to extremely accurate eye detection that can prioritize a single pupil. A green frame appears over the prioritized eye when focus has been achieved for easy confirmation. Eye AF can be used when the function is assigned to a customizable button, allowing users to instantly activate it depending on the scene.Fully compatible with Sony’s E-mount lens system and new full-frame lensesTo take advantage of the lightweight on-the-go body, the α7 is fully compatible with Sony’s E-mount lens system and expanded line of E-mount compact and lightweight full-frame lenses from Carl Zeiss and Sony’s premier G-series.Direct access interface for fast, intuitive shooting controlQuick Navi Pro displays all major shooting options on the LCD screen so you can rapidly confirm settings and make adjustments as desired without searching through dedicated menus. When fleeting shooting opportunities arise, you’ll be able to respond swiftly with just the right settings.High contrast 2.4M dot OLED EVF for eye-level framingView every scene in rich detail with the XGA OLED Tru-Finder, which features OLED improvements and the same 3-lens optical system used in the flagship α99. The viewfinder faithfully displays what will appear in your recording, including the effects of your camera settings, so you can accurately monitor the results. You’ll enjoy rich tonal gradations and 3 times the contrast of the α99. High-end features like 100% frame coverage and a wide viewing angle are also provided.3.0" 921K dot LCD tilts for high and low angle framingThe tiltable 3.0” (921k dots) Xtra Fine™ LCD Display makes it easy to photograph over crowds or low to capture pets eye to eye by swinging up approx. 84° and down approx. 45°. Easily scroll through menus and preview life thanks to WhiteMagic™ technology that dramatically increases visibility in bright daylight. The large display delivers brilliant-quality still images and movies while enabling easy focusing operation.Simple connectivity to smartphones via Wi-Fi ® or NFCILCE-7/B α7 (Alpha 7) Interchangeable Lens Camera No other full frame, interchangeable-lens camera is this light or this portable. 24.3 MP of rich detail. A true-to-life 2.4 million dot OLED viewfinder. Wi-Fi ® sharing and an expandable shoe system. It’s all the full-frame performance you ever wanted in a compact size that will change your perspective entirely.Connectivity with smartphones for One-touch sharing/One-touch remote has been simplified with Wi-Fi®/NFC control. In addition to Wi-Fi support for connecting to smartphones, the α7 also supports NFC (near field communication) providing “one touch connection” convenience when transferring images to Android™ smartphones and tablets. Users need only touch devices to connect; no complex set-up is required. Moreover, when using Smart Remote Control — a feature that allows shutter release to be controlled by a smartphone — connection to the smartphone can be established by simply touching compatible devices.PC control w/ remote video capture controlRemote Camera Control allows you to control your α7 from your PC using a USB cable. Feature control has also been updated to include video capture control.14-bit RAW output for rich tonal gradation14-bit RAW image data of extremely high quality is outputted by the α7. This data fully preserves the rich detail generated by the image sensor during the 14-bit A/D conversion process. When developed with Sony’s Image Data Converter RAW development software, these images deliver the superb photographic expression and rich gradation that only 14-bit data can offer.New BIONZ® X image processing engineSony proudly introduces the new BIONZ® X image processing engine, which faithfully reproduces textures and details in real time, as seen by the naked eye, via extra high-speed processing capabilities. Together with front-end LSI (large scale integration) that accelerates processing in the earliest stages, it enables more natural details, more realistic images, richer tonal gradations and lower noise whether you shoot still images or movies.Full HD movie2 at 24p/60i/60p w/uncompressed HDMI® outputCapture Full 1920 x 1080 HD uncompressed clean-screen video files to external recording devices via an HDMI®connection in 60p and 60i frame-rates. Selectable in-camera A VCHD™ codec frames rates include super-smooth 60p, standard 60i or cinematic 24p. MP4 codec is also available for smaller files for easier upload to the web.Up to 5 fps shooting to capture the decisive momentWhen your subject is moving fast, you can capture the decisive moment with clarity and precision by shooting at speeds up to 5 frames per second. New faster, more accurate AF tracking, made possible by Fast Hybrid AF, uses powerful predictive algorithms and subject recognition technology to track every move with greater speed and precision.Multi-interface Shoe for flash and microphone flexibilityUnlike conventional cameras, the α7 features the advanced Multi-Interface Shoe that dramatically expands compatibility with Sony digital imaging accessories, thus raising the potential for photo/movie shooting.4K Still image output by HDMI® or WiFi® for viewing on 4K TVs8Enjoy Ultra High Definition slide shows directly from the camera to a compatible 4K television. The α7 converts images for optimized 4K image size playback (8MP). Enjoy expressive rich colors and amazing detail like never before. Images can be viewed via an optional HDMI® or WiFi®.TRILUMINOUS™ color outputs wider color gamut to compatible devicesTRILUMINOS™ Color technology, allows you to experience photos and movies in rich, natural colors on any TV equipped with a TRILUMINOS Display™. The expanded color gamut immerses you in those unforgettably colorful moments, from the complex shades in a shimmering blue sky to the delicate skin in a baby’s face.PlayMemories™ Camera Apps allows feature upgradesPersonalize your camera by adding new features of your choice with PlayMemories™ Camera Apps. Find apps to fit your shooting style from portraits, detailed close-ups, sports, time lapse, motion shot and much more. Use apps that shoot, share and save photos using Wi-Fi that make it easy to control and view your camera from smartphone, and post photos directly to Facebook or backup images to the cloud without connecting to a computer.11Image Data ConverterAdvanced features enable manipulation, conversion and management of full-resolution RAW images. You can expertly adjust exposure, white balance, tonal curves, saturation, contrast, hue and sharpness — as well as apply DRO and vignetting compensation. Bundled Remote Camera Control software also lets you remotely activate and deactivate still/ movie recording and control various camera settings from a PC.Vertical Grip CapableEnjoy long hours of comfortable operation in the vertical orientation with this sure vertical grip, which can hold two batteries for longer shooting and features dust and moisture protection.Mount AdaptorsMount any A-mount lens to the α7R with either the LA-EA3 or EA4 35mm full-frame compatible adaptors. The LA-EA4 additionally features a built-in AF motor, aperture-drive mechanism and Translucent Mirror Technology to enable continuous phase-detection AF. Both adaptors also feature a tripod hole that allows mounting of a tripod to support large A-mount lenses.Specifications1. Among interchangeable-lens cameras with an full frame sensor as of October 20132. Records in up to 29 minute segments.3. 99 points when an APS-C lens compatible with Fast Hybrid AF is mounted.7. Actual performance varies based on settings, environmental conditions, and usage. Battery capacity decreases over time and use.8. Requires compatible BRA VIA HDTV and cable sold separately.9. Auto Focus function available with Sony E-Mount lenses and Sony A-mount SSM and SAM series lenses when using LA-EA4 lens adaptor.。
泰晤士线性电机M-Track系列产品说明说明书
M-Track FeaturesLight Duty ActuatorsIntegral end of stroke limit switches standard. No clutch required.Integrated rear clevis for easy pin-to-pin mountingThermal overloads in windings protect the motorOptional potentiometer assures accurate, consistent positioning feedbackKey Features• Compact size • Efficient design• Easy to use and installDual quad ring bearing provides double protection and rod supportLightweight aluminum extension rodCompact spur gear design allows compact space requirementsStandard ModelsM1Unique Hi-Load solid thrust ringSealed limit switchesIP69K and Temporary ImmersionNeoprene Sealing Boot available upon request.Please see pages 9 & 10 for dimensional information. Consult factory for ordering details.M-Track Configurator How To SelectStep 1 – Determine Load and Stroke length requirementsUse the Quick Selection guide to identify the model that will provide the load capacity and stroke length needed for your application.Step 2 – Identify motor type and voltageSelect DC motor and motor voltage.Step 3 – Confirm Speed and Current draw requirements Using the charts provided, confirm that unit speed and current draw is appropriate for the intended use.Step 4 – Confirm the application Duty CycleAt full load capacity, actuators have a 25% duty cycle.Duty cycle is the amount of on-timeon-time + off-timeA unit that runs for 15 seconds should be off for 45 seconds.Side loading and shock loads must be considered in actuator applications. Side loading and cantilevered mounting should be eliminated through proper machine design. Side loading will dramatically reduce unit life. While actuators can withstand limited shock loads, it is recommended that shock loading be avoided wherever possible. (See General Mounting Information on page 71)Step 5 – Unit OptionsM-Track units include end-of-travel limit switches as a standard feature. For positional feedback, a 12K linear membrane potentiometer can be factory installed. The changing potentiometer value provides unit movement feedback for units that are not visible to the machine operator.Scan to watch!Linear Actuator Basic Selection Video https:///ydtpk6M-Track 1DC Motor Acme ScrewUp to 165 lb. (734 N) Rated LoadUp to 1.75 in. (45 mm)/sec. Travel SpeedM-Track 1 compact units are completely self-contained and sealed to allow use in small spaces without sacrificing power or capability. The load and length capabilities provide solutions for a diverse range of intermittent duty applications.Functionally, M-Track 1 actuators are easily interchanged with comparable size hydraulic or pneumatic cylinders on intermittent duty applications. The actuator provides consistent, repeatableperformance even for applications with operating conditions including temperature extremes, high humidity, or significant dust.Features• An Acme Screw drive delivers up to 165 pounds (734 N) of force at a minimum extension rate of 0.25 inches (6.35 millimeters) per second.• The anodized aluminum alloy housing resists corrosion and provides protection from dirt, dust and humidity.• Temperature operating range of –20º F to +150º F (-26º to +65º C). –40º F to +185º F (-40º to +80º C) available.• Standard stroke lengths of 1, 2, 4, 6, 8, 10, 12 inches (50, 100, 150, 200, 254, 300 millimeters) are available.• Internal limit switches automatically shut off the unit at end of stroke.• Optional potentiometercan provide positional location feedback.• IP69K Static, IP65 Dynamic• Temporary Immersion with protective boot (see page 10).• Rod is non rotating during operation, can be rotated for mounting purposes.Typical ApplicationsLight load and short distance applications such as:• Valve and vent adjustments • Light weight tilt or lift positioning • Vise and clamp operations.65Ø.785-.002+.00019.94-0.0510Ø.259.2536.586.43.259.253355[ ][ ]M-Track 1• Stroke and its tolerance are based on a unit with no attached load operating at rated voltage +/-.5VDC, 70° F controlled temperature environment. Note normal wear,temperature changes and load variations all affect the stroke tolerance. If stroke tolerance is critical it is advisable that the selected unit be evaluated for performance in the specific application.• The retract pin to pin dimension and its tolerance are based on a unit with no attached load operating at rated voltage +/-.5VDC, 70° F controlled temperature environment. Note normal unit wear, temperature changes and load variations all affect the stroke tolerance. If the retract pin to pin dimension is critical it is advisable that the selected unit be evaluated for performance in the specific application. • Rotation of the extension tube is allowed up to one full turn to aid mounting. Rotate rod clockwise until it is fully seated in the unit. Rotate counterclockwise no more than one full turn to align clevis pins.• Mounting points in the application must allow the actuator to reach full-extend and full-retract to ensure the internal limit switches are activated. If this is not possible another method for shutting off the actuator must be employed.• If the actuator encounters an obstruction at mid-stroke and is not allowed to reach the internal limit switches the actuator will stall. An internal thermal circuit breaker isdesigned to protect the motor from damage during stalling and/or overheating due to exceeding duty cycle. If tripped it will self reset after a short period of time. The thermal is rated to protect the motor in the event of a stall condition. It is not designed to protect any other device in the circuit. • Warner Linear recommends an externally mounted fuse of 6 AMPs max for 12VDC and 3 AMPs max for 24VDC circuit protection. Anything connected to the actuator must be sized to withstand the actuator’s power consumption orindependently isolated from the circuit.8911773 BODY6294511 TERMINALS (2)TO EXTEND ACTUATORNO CONNECTOR ON POTENTIOMETER UNIT["A"]THRU ALL DIMENSIONS ARE NOMINALUNLESS OTHERWISE SPECIFIEDMeasurements in inches, metric in brackets.。
徕卡M9主要参数
徕卡M9主要参数数码相机类型：旁轴数码相机有效像素数：1800万液晶屏尺寸：2.5英寸存储卡类型：SD卡/SDHC卡快门速度：32-1/4000秒尺寸：139×37×80mm电源：锂离子充电电池(3.7VD...传感器类型：CCD最高分辩率：5212×3472微距对焦范围：视镜头而定快速定位：基本参数镜头闪光灯快门曝光控制拍摄性能取景及显示存储格式其他特性环境参数徕卡M9基本参数数码相机类型旁轴数码相机有效像素数1800万最大像素数1850万最高分辩率5212×3472传感器类型CCD对焦方式视镜头而定徕卡M9镜头实际焦距视镜头而定mm微距对焦范围视镜头而定光圈范围视镜头而定相机闪光灯内置徕卡M9快门快门类型电子控制焦平面快门、B门曝光模式程序自动曝光、手动曝光曝光测光多区矩阵测光,中央重点测光,点测光白平衡预设自动、7种预设,手动白平衡自拍功能支持12秒或2秒延时德语, 英语, 法语, 西班牙语, 意大利语, 日语, 简体中菜单语言文, 繁体中文, 俄语徕卡M9取景及显示液晶屏类型TFT LCD显示屏液晶屏象素23万徕卡M9存储格式存储卡类型SD卡/SDHC卡查看闪存卡报价锂电池、电池充电器、机身盖、USB连线、背带、随机附件CD-ROM、说明书连接类型USB 2.0颜色黑色, 银色重量585.0g三脚架螺孔1/4"标准徕卡M9环境参数工作湿度<85%存储温度-20-60℃以上参数仅供参考，产品以实物为准。
如参数不全或有误，欢迎您帮我们添加与纠正！>>位于德国索姆斯镇的徕卡股份公司（Leica Camera AG）推出了一款新的相机-- 徕卡M9，这是世界上第一台带全画幅24 ×36 mm传感器的联动测距数码相机。
作为世界上最紧凑的全画幅相机，徕卡M9沿承了徕卡联动测距系统和其他装置的传奇性传统。
在过去50多年中，徕卡不断采用最前沿的数字技术对M系列相机进行技术改进。
Hollister M9 Cleaner Decrystallizer 产品说明说明书
MATERIAL SAFETY DATA SHEET Section 1 – Product and Company InformationHollister M9 Cleaner/DecrystallizerProduct Code: 7736 (16 oz.) Product CAS Number: MixtureCompany Information: Product Safety Information:Hollister Incorporated 2000 Hollister Drive Libertyville, IL 60048 Contact : Anne Riba Phone: (847)680-1000Section 2 – Hazards IdentificationNo known hazardous ingredients as defined in 29 CFR 1910.1000 are containedin this product.Section 3 – Composition / Information on IngredientsWater Alkyl aryl alkoxy potassium saltGlycerin Octoxynol-9 Sodium Acetate 2-Bromo-2-nitro-1,3-propanediolSodium Citrate1,2,3-Propanetricarboxylic Acid, 2-hydroxy, Copper Sodium Salt(Copper Concentration 2.3 mg/g)Section 4 – First Aid MeasuresEye / Skin Contact: In case of contact with eyes, immediately flushwith water.Ingestion: Give two glasses of water and induce vomiting.Never give anything by mouth to an unconsciousperson. If necessary, contact a physician.Section 5 - Fire Fighting Measures5.1 Flammable Properties: This water-based material has little potential for fire orexplosionFlash Point: Not ApplicableFlammability Limits:LFL – UFL – Not Applicable Not Applicable5.2 Extinguishing MediaNot Applicable5.3 Protection of FirefightersNot ApplicableSection 6 – Accidental Release MeasuresClean with water.Section 7 – Handling and StorageNo special handling and storage required.Section 8 – Exposure Control / Personal ProtectionExposure Guidelines: Oral LD50 (Rats) is >5g/kg (Copper concentration= 2.3 mg/g)Ventilation: No special ventilation requiredEye Protection: None anticipatedSkin Protection: None anticipatedRespiratory Protection: None anticipatedSection 9 – Physical and Chemical PropertiesAppearance / Physical State /Blue odorless liquidOdor:pH: 7.3 - 8.3Boiling Point: 210-212°C at 760 mmHgSpecific Gravity: 1.10 – 1.20 at 25°CSolubility in Water: SolubleSection 10 – Stability and ReactivityChemical Stability: StableConditions to Avoid: No known conditionsIncompatible Materials: None knownHazardous DecompositionNone knownProducts:Possibility of HazardousWill not occurReactions:Section 11 – Toxicological InformationOral LD50 (Rats) – >5g/kg (Copper concentration = 2.3 mg/g)Acute and chronic toxic reactions are not anticipated as a result of use following package instructions.Contains no known carcinogens or materials under investigation as potentialcarcinogens.Section 12 – Ecological InformationNot ApplicableSection 13 – Disposal ConsiderationsDisposal should be in accordance with applicable regional, national and locallaws and regulations. Local regulations may be more stringent than regional ornational requirements.Section 14 – Transport InformationThe data provided in this section is for information only. Please apply theappropriate regulations to properly classify your shipment.U.S. DOT Hazard Class: Not regulated as hazardousUN Number: Not regulated as hazardousSection 15 – Regulatory InformationNot AvailableSection 16 – Other InformationNot ApplicableThe information contained in this Material Safety Data Sheet (MSDS) is offered as a guide to the handling of this specific material. It has been prepared in good faith by technically knowledgeable personnel and is believed to be correct as of the effective date listed. Hollister Incorporated shall not be held liable for any damages, losses or injuries of any nature which may result from the use of or reliance upon any information contained in this MSDS.。
高中英语《Unit-1-Other-countries--other-cultures-Readin
M9U1Reading-Grammar一、根据句意或者首字母填写单词。
1.On the cold evening two men were to death on the mountain.(freeze)2.There are (数不清的)arguments against this ridiculous proposal.3.His favourite (娱乐)are golf and playing Scrabble.4.It’s so cold here in winter and temperatures could fall to m 20 at night.5.It’s like an underground city, c an area of 20 acres.6.The Canadian National Tower is often CN Tower for s .7.Please give me a （具体的）explanation.8.The s of North America by Europeans began in the 16th century.9.The job will take (大约)three weeks and 200 hundred workers.10.The city was first s by French people, so many of them speak French.二、根据句意选择适当的短语, 并注意形式上的变化。
second only to, be home to, appeal to, go with, be superior toseek one’s fortune, little more than, be separated by1.The forests which used to various animals were burned into ashes in the terrible fire.2.Do these red trainers well the dress?3.The Yellow River is the Yangtze River in China.4.The well-designed project will surely us senior high school students.5.Many people left their homes to in the Gold Rush in the past.6.It was an army camp protecting hunters and merchants.7.The two islands th e Irish Sea.8.Thi.employ e..........th.forme.i.ability....三、完成句子。
维克托利克公司产品说明书
ALWAYS REFER TO ANY NOTIFICATIONS AT THE END OF THIS DOCUMENT REGARDING PRODUCT INSTALLATION, MAINTENANCE OR SUPPORT.(By Others)Series 78USeries 786Series 78TSUPPLY1.0 PRODUCT DESCRIPTIONAvailable Sizes• ½ – 2”/DN15 – DN50Maximum Working Pressure • 400 psi/2758 kPa/27.6 bar Operating Temperature Range• –4°F to +230°F/–20°C to +110°CFunction• Provides simplified coil circuit installation that meets optimal hydronic system design requirements Application• Hot and cold water, including treated and untreated water systems • This KOIL-KIT ™ Coil Pack includes:• (1) Series 78T Ball Valve Union Combination – Sweat x Sweat • (1) Series 78U Union Port Fitting – Sweat x Male Union • (1) TA Series 786H Balancing Valve – Sweat x SweatNOTE• The Series 78T includes a PT port and a blow-down valve. The Series 78U includes a PT port and a manual air vent.2.0 CERTIFICATI N/LISTINGSProduct designed and manufactured under the Victaulic Quality Management System, as certified by LPCB in accordance with ISO-9001:2008.Series 78T/78U Manual Koil-Kit ™ Coil Pack with TA Series 786H Sweat Globe Style Valve08.63System No.Location Submitted ByDateSpec Section Paragraph ApprovedDateSeries 78T Ball Valve Union Combination Body: Dezincification resistant (DZR) brass alloy Union: DZR brass with EPDM O-ring Tailpiece: DZR brassStem: BrassStem O-Ring Seals: EPDMHandle: Steel with vinyl gripSeries 78U Union Port FittingBody: DZR brass alloyUnion: DZR brass with EPDM O-ringSeals: EPDM O-ringTailpiece: DZR brass alloyTA Series 786H Balancing ValveValve Body and Bonnet: AMETAL® DZR brass alloy Sealing (Body/Bonnet): EPDM O-ringValve Plug: AMETAL®Seat Seal: EPDM O-ringSpindle: AMETAL®Slip Washer: Polytetrafluoroethylene (PTFE) Spindle Seal: EPDM O-ringSpring: Stainless steelHand Wheel: Polyamide and TPEMeasuring Points: AMETAL®Measuring Point Seals: EPDMMeasuring Point Caps: Polyamide and TPENOTE• AMETAL® is the dezincification-resistant brass alloy of IMI TA.Series 78T Ball Valve Union CombinationNOTE• Optional tailpieces may be ordered for reductions and for changing end configurations from sweat to threaded or threaded to sweat. If needed, specify optional tailpiece when ordering.Series 78U Union Port FittingNOTE• Optional tailpieces may be ordered for reductions and for changing end configurations from sweat to threaded or threaded to sweat. If needed, specify optional tailpiece when ordering.4.3 OPTIONAL PARTSSeries 78T/78U Union Tailpieces (Optional)Female Tailpiece Sweat Tailpiece Male TailpieceHose End Drain Valve (Optional)A hose end drain valve is factory-installed on the Series 78T.4.5 OPTIONAL PARTSProbe Port (Optional)For Series 78T and Series 78UHandle Extension (Optional)For Series 78T4.7 OPTIONAL PARTSAir VentA manual air vent is factory-installed on the Series 78U. This product can also be mounted on the Series 78T or provided loose for other piping needs.C V /K V values for flow of water at +60°F/+16°C are shown in the table.Formulas for C V and K V valuesΔP = Q 2/C V 2 ΔP = Q 2/K V 2Q = C V × √ΔPQ = K V × √ΔPSeries 78T Ball Valve Union CombinationSeries 78U Union Port FittingFlow CoefficientC v K v Q (Flow)GPM m3/hr ΔP (Pressure Drop)psibarWhere:TA Series 786H Balancing Valve Valve Selection GuideNOTES• Balancing valves should be sized in accordance with the GPM/LPM flows (and not in relation to pipeline size). Sizing balancing valves based on the minimumor maximum flow rates is not recommended. Valves should be sized using the nominal flow rate only. The Minimum Flow is calculated from the minimum open setting of the valve and a minimum pressure drop 1 Ft. WG (= 3 kPa). The Nominal Flow is calculated from the maximum open setting of the valve and the minimum recommended pressure drop, 2 Ft. WG (= 6 kPa). The Maximum Flow is calculated from the maximum open setting of the valve and the maximum pressure drop, 20 Ft. WG (= 60 kPa). A computer program, TA-Select, is available for calculation of valve handwheel pre-set position and other applications.• For information regarding Allen Wrench sizes see the Material Specifications section on page 3.• Measuring Accuracy: The hand wheel zero position is calibrated and must not be changed. Valves have an accuracy of flow measurement of 2% to 3% whenused within their recommended flow range and installed in accordance with the figure below.• For the most accurate results, a Series 734 TA SCOPE or Series 73M CMI should be used. However, any differential pressure meter may be used.The illustration relates to the accuracy of differential pressure measurement and is not an installation requirement.2 D 10 D2 D 5 D 5.2 PERF RMANCETA Series 786H Balancing Valve Cv Values for Various Handle SettingsThe values below may be used when calculating and sizing a piping system.1C V = GPM at a ΔP of 1 psi/7 kPa) through the valve at any given setting.1 psi = 2.31 ft. of H 2O 2Full open valve.For liquids other than water, the flow values from the balancing wheel can be adjusted as follows:Divide the flow rate by the square root of the specific gravity.This applies to liquids having, on the whole, the same viscosity as water, i.e. most water/glycol mixtures and water/brine solutions at room temperature. At low temperatures, the viscosity increases and laminar flow may occur in certain valves. The risk increases with small valves, low settings and low differential pressures.A computer program (Hy-Select) is available for calculation of pre-setting values and other applications. When the flow setting is verified or changed to the final setting, the memory stop should be set. Contact Victaulic for further information. When Δp and the design flow rate are known, use the formula shown to calculate the C V value.A computer program, Hy-Select, is available from Victaulic for calculation of pre-setting values and other applications.5.4 PART CODES08.63 11841 Rev B Updated 04/2020 © 2020 Victaulic Company. All rights reserved.User Responsibility for Product Selection and SuitabilityEach user bears final responsibility for making a determination as to the suitability of Victaulic products for a particular end-use application, in accordance with industry standards and project specifications, and the applicable building codes and related regulations as well as Victaulic performance, maintenance, safety, and warninginstructions. Nothing in this or any other document, nor any verbal recommendation,advice, or opinion from any Victaulic employee, shall be deemed to alter, vary, supersede, or waive any provision of Victaulic Company's standard conditions of sale, installation guide, or this disclaimer.Intellectual Property RightsNo statement contained herein concerning a possible or suggested use of any material, product, service, or design is intended, or should be constructed, to grant any license under any patent or other intellectual property right of Victaulic or any of its subsidiaries or affiliates covering such use or design, or as a recommendation for the use of suchmaterial, product, service, or design in the infringement of any patent or other intellectual property right. The terms “Patented” or “Patent Pending” refer to design or utility patents or patent applications for articles and/or methods of use in the United States and/or other countries.NoteThis product shall be manufactured by Victaulic or to Victaulic specifications. Victaulic recommends all products to be installed in accordance with current IMI TA installation/assembly instructions. Victaulic and IMI TA reserve the right to change productspecifications, designs and standard equipment without notice and without incurring obligations.InstallationReference should always be made to the current IMI TA installation/assembly instructions for the product you are installing. For coupling and strainer installation, reference should always be made to the I-100 Victaulic Field Installation Handbook for the product you are installing. Handbooks are included with each shipment of Victaulic products for complete installation and assembly data, and are available in PDF format on our website at WarrantyRefer to the Warranty section of the current Price List or contact Victaulic for details.TrademarksVictaulic and all other Victaulic marks are the trademarks or registered trademarks of Victaulic Company, and/or its affiliated entities, in the U.S. and/or other countries.7.0 REFERENCE MATERIALS08.16: Victaulic Balancing Valves - TA Series 786H/787H/788/789 and Series 78KH I-KOIL-KIT: Victaulic KOIL-KIT™ Coil Pack Installation and Maintenance Instructions11。
M9u1Project教案
M9 Unit1 Project Making a didplay about national cultureIs Australia really a sporting nation?Teaching aims:1.To enable the Ss to use some words and phrases such as distinguish, while, content, unfit, owe, equip and worthy.2.To enable the Ss have a good understanding of text by analyzing the long and complex sentences.Teaching important and difficult points:1.To help Ss get a general idea about the text.2.Master the meanings and usages of some words and phrases. Teaching procedures: 分层次问题教学Step 1 Fast-reading(A类问题)(Teaching methods: Group presentation ,guidance)Read the passage and circle which ones are true (T), which ones are false (F).F1. Australians only talk about sport in canteens and pubs.F2. The Australians’ dev otion to sport is famous because most of them do much sport.T3. Many Australians think the reason why they love sport is that the climate is mild with much sunshine.T4. Swimming and surfing are popular sports for the 20 million Australians living near the coast.F5. Many Australians often play tennis in the evening or late into the night because they can see well due to the lighting facilities.F6. While playing footy, players cannot hold the ball. They can only run after it.F7. Cricket was born in Australia and has been exported to the UK and many other countries.T8. For most Australians, horse racing is a sport to watch rather than to participate.T9. The achievements that Australians have achieved at different international games prove that Australia is really a sporting nation.Step 2 Careful-reading(Teaching methods: Group presentation ,guidance and interaction)Read the passage carefully and fill in the blanks .Answers:1 Reasons 2 Mild 3. including 4. encouragement 5. Popular 6. surfing 7. team 8. achievements 9 ranking 10. ConclusionStep3 Language study（B类问题）(Teaching methods: Group presentation ,guidance and interaction)1. The sport that most of the world calls football is known as soccer in Australia, to dis tinguish it from ‘footy’, which is short for Australian rules football.(P14Line28—30)distinguish (v.) 区分，区别；使与众不同eg. The girl is color-blind; she can’t distinguish between colors.这女孩是色盲，她不能辨别颜色。
project学案
2016年春学期高二英语导学案46M9U1 Project Making a presentation about Chinese culture主备人：李兆凤备课组长：黄苏轶Learning objectives:1. Students will read a magazine article about one aspect of the Australian culture --- sport.2. Students will learn how to write about one particular aspect of the Chinese culture.3. Students will be able to organize their presentation and present it.Individual learning tasks:Step 1 Questions1. In which country were the 2000 Olympic Games held?2. What was its theme song?Step 2ReadingPart 1 (Paras_____ )Australians’ absolute ________ of sport and ________ that make them love sportsI. Australians’ absolute_________ of sport1. There is __________ ambiguous about it.2. Their absolute love of it seems __________.3. They talk about sport _______ _________ __________.4. It seems to be the __________ topic of conversation.5. The conversation quickly ___________ to sport.II. ________ that make them love sport____________ conditions; Space; ____________Part 2(Paras_____ ) Sports that Australians likePopular sports in Australia: _______________________________________Why?_________________________________________________________Part 3(Paras_____ ) Statistics proving that Australia is a sporting nationAustralia’s outstanding perfo rmances:1. Australia is ______ of the winning nations.2. Australian performers often win a great percentage of __________. At the 2008Beijing Olympics, only ________ countries won more medals than Australia.Step 3 Useful expressions1. 现场观看比赛或电视转播2. 对......的分析3. 优势和劣势嗜好/癖好在某方面弱她酷爱甜食。
品牌：Mica 产品名：M9 型号：无说明书
Installationing the dimensions below,mark the mounting and wire hole locations onto the proposed mounting surface.Drill two,.250"diameter mounting holes and a .625"(minimum)wire access hole into the mounting surface.2.Place the appropriate gasket into position on the rear of the M9assembly (see Gasket Note).NOTE:On the back of the gasket,the word "BOTTOM"shows the correct orientation.Insert the slotted hole screw grommet through the mounting holes on the M9/Gasket assembly.Feed the M9wires through the wire access hole in the mounting surface.Press the M9/Gasket/Grommet assembly onto its mounting location so that it is flat against the mounting surface.3.With the assembly in position and using the hardware provided,tighten the mounting screws until the lighthead assembly is drawn firmly against the mounting surface.DO NOT OVERTIGHTEN!4.9Using appropriately sized wires (minimum 18AWG),extend the M wires to their designated connections.Refer to the diagram below for wiring and fusing information.©20Whelen Engineering Company Inc.21Form No.A ()14D46010821Safety First: This document provides all the necessary information to allow your Whelen product to be properly and safely installed. Before beginning the installation and/or operation of your new product, the installation technician and operator must read this manual completely. Important information is contained herein that could prevent serious injury or damage.M9 Series LED Lighthead - (B/T/T, Turn Signal, Back-Up)For warranty information regarding this product, visit /warranty•Proper installation of this product requires the installer to have a good understanding of automotive electronics,systems and procedures.•Whelen Engineering requires the use of waterproof butt splices and/or connectors if that connector could be exposed to moisture.•Any holes,either created or utilized by this product,should be made both air-and watertight using a sealant recommended by your vehicle manufacturer.•Failure to use specified installation parts and/or hardware will void the product warranty!•If mounting this product requires drilling holes,the installer MUST be sure that no vehicle components or other vital parts could be damaged by the drilling process.Check both sides of the mounting surface before drilling begins.Also de-burr any holes and remove any metal shards or remnants.Install grommets into all wire passage holes.•Do not install this product or route any wires in the deployment area of your air bag.Equipment mounted or located in the air bag deployment area will damage or reduce the effectiveness of the air bag,or become a projectile that could cause serious personal injury or death.Refer to your vehicle owner's manual for the air bag deployment area.The User/Installer assumes full responsibility to determine proper mounting location,based on providing ultimate safety to all passengers inside the vehicle.•For this product to operate at optimum efficiency,a good electrical connection to chassis ground must be made.The recommended procedure requires the product ground wire to be connected directly to the NEGATIVE (-)battery post.•If this product uses a remote device to activate or control this product,make sure that this control is located in an area that allows both the vehicle and the control to be operated safely in any driving condition.•Do not attempt to activate or control this device in a hazardous driving situation.•This product contains either strobe light(s),halogen light(s),high-intensity LEDs or a combination of these lights.Do not stare directly into these lights.Momentary blindness and/or eye damage could result.•Use only soap and water to clean the outer e of other chemicals could result in premature lens cracking (crazing)and discoloration.Lenses in this condition have significantly reduced effectiveness and should be replaced immediately.Inspect and operate this product regularly to confirm its proper operation and mounting condition.Do not use a pressure washer to clean this product.•W ARNING!All customer supplied wires that connect to the positive (+)terminal of the battery must be sized to supply at least 125%of the maximum operating current and “at the battery”to carry that load.DO NOT USE CIRCUIT BREAKERS FUSED WITH THIS PRODUCT!•FAILURE TO FOLLOW THESE PRECAUTIONS AND INSTRUCTIONS COULD RESULT IN DAMAGE TO THE PRODUCT OR VEHICLE AND/OR SERIOUS INJURY TO YOU AND YOUR PASSENGERS!51 Winthrop RoadChester, Connecticut 06412-0684Phone: (860) 526-9504SalesEmail:*******************CanadianSales:************************CustomerService:*******************B/T/T3 POS DEUTSCH SOCKET POS.A - BROWN POS. B -YELLOW POS. C - WHITE AMP 3 POS PIN POS 1 - BROWN POS 2 -YELLOW POS 3 - WHITE BACKUP3 POS DEUTSCH SOCKET POS.A - WHITE POS. B - N/C POS. C - BLACK AMP 3 POS PIN POS 1 - WHITE POS 2 - N/C POS 3 - BLACK TURN SIGNAL2 POS DEUTSCH SOCKET POS.A - ORANGE POS. B - BLACK CAP - WHT/VIO AMP3 POS PIN POS 1 - N/CPOS 2 - ORANGE POS 3 - BLACK CAP - WHT/VIOWiring:Back-Up ModelConnect WHT wire to output wire of the back-up light circuit.(+) 10-30V Connect BLK wire to GROUND.B/T/T ModelConnect YEL wire to (+) 10-30V output wire of brake light circuit.Connect BRN wire to (+) 10-30V output wire of the taillight circuit.Connect WHT wire to GROUND.Turn Signal ModelConnect ORG wire to (+)10-30V output wire of the turn signal circuit.Connect BLK wire to GROUND.Connect WHT/VIO wire to a momentary switch and extend the wire to (+)10-30V.Fuse wire @ 1Amp.TURN SIGNAL Model ®1.Steady On (Arrow)Sequence2.to Solid (80 FPM)Flashing Arrow3.(80 FPM)Flashing Solid 4.(80 FPM)Sequence to Solid 5.(120 FPM)6.Flashing Arrow (120 FPM)7.Flashing Solid (120 FPM)Sequence to Solid 8.Steady On (Slow)Sequence to Solid 9.Steady On (Fast)Steady On (Solid)10.WHITE/VIO - ScanLock™Pattern Selection:This feature allows the user to select from several available flash patterns. Lighthead must be powered on for Scan-Lock to work.TO CYCLE THROUGH ALL PATTERNS:Apply (+) 10-30V to the WHT/ VIO wire for less than 1 second and release.To cycle backward, apply (+) 10-30V to the WHT/VIO wire for over 1 second and release.TO SET A PATTERN AS DEFAULT:Allow the pattern to run for more than 5seconds.The lighthead will now display this pattern when active .TO RESET TO THE FACTORY DEFAULT PATTERN:Turn off power. While applying (+) 10-30V to theWHT/VIO wire, turn power on.The lighthead will reset to its default pattern.。
M9问题汇总及解决方法
【新手入门之软件安装篇】*首先要说的是在Android平台上安装文件的后缀名一般为“.apk”（如果你下载的软件是rar或者zip的话请解压之后再安装），和WM平台上的安装文件的后缀名“.exe”或者S60平台上的安装文件的后缀名“.sis或.sisx”相似。
所以只要看到“.apk”结尾的文件就肯定是安装文件了。
建议在SD卡里建立几个文件夹，这样便于管理，例如：软件、游戏、插件等，然后把下载的APK文件拷到对应的文件夹下面即可，此时关闭USB，点击手机里的文档（M9的文档已经很地道了），这时就可以看到刚才在SD卡中建立的文件夹了，找到自己要安装的APK文件直接点击即可，按照提示进行安装，一般安装很快的。
软件卸载非常简单方便，直接按住要卸载的软件1秒钟，手机下方有一个红色卸载区域，把软件直接拉进去即可。
===============================================【新手入门之操作篇】M9有屏幕下方有三个操作间，从左到右分别是返回键、主页键、菜单键，主页键为物理按键，其他两个为触摸式按键。
这里给一些快捷键：截图=同时按住电源键+主页键，这里需要注意，在关机状态下按住电源键+主页键为清除数据，谨慎使用。
开机状态下，长按电源键15秒后手机自动重启，这个很有用。
有的界面里比如浏览器界面下长按菜单键会出现所浏览的所有网页。
双击主页键（要快速），可以看到最近打开的程序，可以用这个杀进程。
拒接电话可以双按电源键，按一次是静音，或者把屏幕偏上方的电话往下拉即可。
结束程序时用返回键，不要点击主页键退出，这个跟IP有区别。
*拨号界面下输入*#*#4636#*#*进入工程测试模式。
Android是一个开源的系统，这意味着它有更高的开放性。
有很多实用的数据工程师们把它们放到Android的工程测试模式里，在这里我们可以查看手机网络信息、电池温度、电池使用时间、传感器使用情况等，这里就是一片无比宽广的天地，当然初级网友最好是看看就算了，千万不要改动里面的设置。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
duckbill Kangaroo Koala bear
What is Australia famous for?
beautiful scenery
What is Australia famous for?
People love oueally a sporting nation?
which 4. Another popular sport, cricket, is originally from the UK, and has been exported to and followed ／ religiously in countries influenced by Britain. affected/impacted 另一项流行的体育运动起源于英国， 另一项流行的体育运动起源于英国，它被介 绍到受英国影响的国家， 绍到受英国影响的国家，且大为盛行。
5. Considering Australia’s relatively small Considering population, its outstanding performance in the Olympic Games was really amazing. Given Australia’s relatively small population taken into consideration /account, its remarkable /excellent performance in the Olympic Games was really amazing. 考虑到澳大利亚人口相对较少， 考虑到澳大利亚人口相对较少，它在奥运会上 的出色表现着实令人惊讶。 的出色表现着实令人惊讶。
What factors help make Australia a sporting nation?
Popular sports in Australia
Sport Water sport Ball games Others Examples swimming; surfing; sailing tennis; cricket; rugby; soccer; footy horse racing
owe owe vt. & vi. ★用作及物动词时，意为“欠钱；归 用作及物动词时，意为“欠钱； 因于，归功于；（对某人）负有 因于，归功于；（对某人）负有…… ；（对某人 （义务）”等。例如： 义务） 例如： He still owes me 1,000 yuan which he borrowed from me ten years ago. 他十年前向我借的1000元钱现在还没 元钱现在还没 他十年前向我借的 还我。 还我。
Read the passage and analyse it.
Group work
Divide the text into three parts and write down the general idea of each part. Part I （1-3） See more ） Australians’ absolute love of sports and factors for being a great sporting nation. Part II （4-8） ） Part III （9-10） ） Conclusion: statistics prove that Australia is a sporting nation.
the _2_of sport in Australia and the unique points
_5_making Australia a great sporting nation
weather They talk about sport all the The _6_conditions are time. Sport is the only _3_ topic perfect. The climate is of conversation. But they mild. The sun shines are _4_ to just sit in their most of the time. armchairs and watch. There are two-days… content
A _1_ nation- Australia
sporting devotion status
_7_ to some sports
the _8_ of Australia’s sports and its sports’ fame
swimming; sailing; tennis, Australia is amongAlthough the cricket; rugby, winning nations. _9_it has a soccer; footy small population, its outstanding performance in the O.P. was _10_ . amazing
There is no doubt that Australians love sport.
2. Indeed , sitting (sit) in front of the television ______ watching (watch) a sporting event, with a drink ________ in one hand some fast food in the other, is very common in Australia.
6. Among the most impressive athletes were the swimmers, but all of the athletes were worthy of praise praise. be worth praise/ worth praising/ worthy of being praised/ worthy to be praised 最令人印象深刻的是游泳健将们，当然， 最令人印象深刻的是游泳健将们，当然，所 有的的运动员都值得表扬。 有的的运动员都值得表扬。 be worth sth/ worth doing/ worthy of being done/ worthy to be done
Unit 1 Project
Quiz
People often associate a country with some famous aspects of its culture. What do you suppose people think about when France, Britain, India or Australia is mentioned?
的确，人们一手握饮料一手捧快餐，坐在电视机前看 的确，人们一手握饮料一手捧快餐， 体育赛事，这在澳大利亚非常普遍。 体育赛事，这在澳大利亚非常普遍。
3. The sport that most of the world calls football is known as soccer in Australia, to distinguish it （ from “footy”, which is short for Australian rules football. tell ） is called/is referred to as/ is named 世界大部分地区将足球叫做football, 而在澳大利 世界大部分地区将足球叫做 亚叫soccer,以区别于简称为 以区别于简称为footy的澳式足球。 的澳式足球。 亚叫 以区别于简称为 的澳式足球 be short for 是……的简称 的简称 for short
Sport
Examples swimming; surfing; sailing tennis; cricket; rugby; soccer; footy
Why popular most of the population live near the coast; the sun shines most of the time; a long coastline full of beaches; a two-day weekend to enjoy the outdoors well-equipped facilities; after-school lessons are given; encouragement from parents and teachers
翻译下列句子。 翻译下列句子。 1. 由于下雨，比赛被推迟到明天。 由于下雨，比赛被推迟到明天。 Owing to the rain the match will be put off till tomorrow. 2. 多亏了这位医生，我现在还能活着。 多亏了这位医生，我现在还能活着。 I owe it to the doctor that I am still alive.
Water sport
Ball games
Others horse racing long history; a sport to watch; almost everyone involved
summary
A _1_ nation- Australia
sporting love features
Jim owed his success to luck more than hard work. 吉姆认为他的成功更多靠的是运气而不是努力。 吉姆认为他的成功更多靠的是运气而不是努力。 ★用作不及物动词时，意为“欠别人的钱”， 用作不及物动词时，意为“欠别人的钱” 常与介词for连用。 常与介词 连用。 连用 eg:Bill still owes for his books. [拓展 拓展] 拓展 owing to由于，因为 由于， 由于 owe it to ... that ... 多亏了；归功于 多亏了；