新型可重构光分插复用器及其联网性能分析

第40卷第12期 光电工程V ol.40, No.12 2013年12月Opto-Electronic Engineering Dec, 2013 文章编号:1003-501X(2013)12-0073-07

新型可重构光分插复用器及其联网性能分析

张明,董章龙,全必胜,乐孜纯

( 浙江工业大学理学院,杭州 310023 )

摘要:采用分立光器件技术,设计了一种基于四光纤准直器和介质薄膜滤波片的新型可重构光分插复用器,该器件的输入、下路、上路和输出四个端口位于可重构光分插复用器的同一侧。利用Optisystem软件,对所设计的ROADM器件的性能及其在联网条件下的误码率和眼图进行了仿真测试。仿真结果显示:该器件的光功率损耗为

2 dB,各信道增益基本均衡;联网条件下,在传输距离为75 km、传输速率为2.5 Gb/s的系统中,误码率小于10-9,

Q因子大于6,眼图清晰。该器件可以满足城域网中的传输需求。

关键词:光分插复用器;四光纤准直器;介质薄膜滤波片;误码率;眼图

中图分类号:TN913.7 文献标志码:A doi:10.3969/j.issn.1003-501X.2013.12.013

A Novel Reconfigurable Optical Add/Drop Multiplexer and

Its Networking Performance Analysis

ZHANG Ming,DONG Zhanglong,QUAN Bisheng,LE Zichun

( College of Sciences, Zhejiang University of Technology, Hangzhou 310023, China ) Abstract: Applying discrete optical component technology, a novel Reconfigurable Optical Add/Drop Multiplexer (ROADM) based on the four-fiber collimator and thin film filter is designed. Four ports, including input port, drop port, add port and output port, are arranged on the same side of ROADM. Simulations to the designed ROADM, as well as bit error rate and eye diagram in networking, are performed using Optisystem. Simulation results show that the designed ROADM has loss of 2 dB and balanced channel gain. In networking, the bit error rate is less than 10-9 and Q value is more than 6 with clear eye diagrams at speed of 2.5 Gb/s and distance of 75 km, which verifies that the designed ROADM is suitable for the metropolitan area network system.

Key words: optical add/drop multiplexer; four-fiber collimator; thin film filter; bit error rate; eye diagram

0 引 言

可重构光分插复用器(Reconfigurable Optical Add/Drop Multiplexer,ROADM)可以实现从光网络中有选择地下路通往本地的光信号、上路本地用户发往另一节点用户的光信号以及直通那些不需要在本地节点进行任何处理的光信号。它可以不经过光/电/光转换,就能实现波分复用信道的分插功能,具有对信号制式和速率的透明性,是波分复用光网络的关键网元之一[1]。

目前,ROADM主要分为基于集成器件型和基于分立器件型两大类。基于集成技术的主要有利用光纤光栅、阵列波导光栅、光开关阵列、声光可调谐滤波器等的ROADM [2-11],此类ROADM支持的信道数目多,但对制造装备要求高、成本高、工艺难度大[12]。而基于分立器件的ROADM,技术成熟,成本较低,一般采用分立的透镜、棱镜、反射镜、滤波器等[13-15]构成,比如基于单纤准直器和双纤准直器的ROADM。但这些器件的四个端口一般都是位于器件的两侧[15],导致器件结构复杂、尺寸偏大、实际可操作性差。此

收稿日期:2013-06-08;收到修改稿日期:2013-08-22

基金项目:国家自然科学基金(61007031);浙江省自然科学基金资助项目(Y1110923)

作者简介:张明(1975-),男(汉族),河北唐山人。博士,副教授,主要从事光通信器件、光电子技术等方面的研究。E-mail: cim2046@https://www.360docs.net/doc/7510689314.html,。

https://www.360docs.net/doc/7510689314.html,

相关文档
最新文档