Investigations into the antibacterial behavior of copper nanoparticles against Escherichia coli

ORIGINAL ARTICLEInvestigations into the antibacterial behavior of copper nanoparticles against Escherichia coliMuhammad Raffi &Saba Mehrwan &Tariq Mahmood Bhatti &Javed Iqbal Akhter &Abdul Hameed &Wasim Yawar &M.Masood ul HasanReceived:20July 2009/Accepted:28December 2009/Published online:17February 2010#Springer-Verlag and the University of Milan 2010Abstract Zerovalent copper nanoparticles (Cu 0)of 12nm size were synthesized using an inert gas condensation method in which bulk copper metal was evaporated into an inert environment of argon with subsequent cooling for nucleation and growth of nanoparticles.Crystalline struc-ture,morphology and estimation of size of nanoparticles were carried out by X-ray diffraction and transmission electron microscopy.The antibacterial activity of these nanoparticles against the Gram-negative bacterium Escher-ichia coli was assessed in liquid as well as solid growth media.It was observed from scanning electron microscopic analysis that the interaction of copper nanoparticles with E.coli resulted in the formation of cavities/pits in the bacterial cell wall.The antibacterial property of copper nanoparticles was attributed mainly to adhesion with bacteria because of their opposite electrical charges,resulting in a reduction reaction at the bacterial cell wall.Nanoparticles with alarger surface-to-volume ratio provide more efficient means for antibacterial activity.Keywords Copper nanoparticle .Antibacterial activity .Escherichia coli .X-ray diffraction .Electron microscopyIntroductionMicrobial contamination of air,water and soil due to different types of microorganisms creates problems in living conditions,and in the public health and industrial fields.As a result,an increased occurrence of antibiotic resistant genes in many bacterial species is found in human beings and animals.The over-use of antibiotics against pathogenic bacteria causes harmful side effects that has resulted in the emergence of resistance to antibiotics in bacteria (Levy 1991;Tong et al.2005;Hu and Xia 2006).Some fungi have become a major health threat,particularly to patients with compromised immune systems,especially those suffering from acquired immune deficiency syndrome (AIDS)or receiving chemotherapy (Cioffi et al.2005).To seek solutions to such problems a great deal of research work is being performed to develop materials with novel properties that have specific antimicrobial activities for use in fighting infections to create sterile conditions.A great deal of research work has focused on the synthesis of novel materials to design properties for innovative biotechnolog-ical applications in medical implants,drug delivery sys-tems,sterile coatings for biomedical devices,adhesives and packaging (Cioffi et al.2005).Given their catalytic,optical,electrical and magnetic properties,metal nanoparticles and nanomaterials are considered a source of great importance for a wide range of biological and pharmaceutical applications (Mamunya etM.Raffi (*):M.M.ul HasanDepartment of Chemical and Materials Engineering,Pakistan Institute of Engineering and Applied Sciences (PIEAS),Islamabad 45650,Pakistane-mail:muhammad_raffi@S.Mehrwan :A.Hameed Department of Microbiology,Faculty of Biological Sciences,Quaid-i-Azam University,Islamabad,PakistanT.M.Bhatti :W.YawarCentral Analytical Facility Division,Pakistan Institute of Nuclear Science and Technology (PINSTECH),Islamabad 45650,PakistanJ.I.AkhterPhysics Division,Pakistan Institute of Nuclear Science and Technology (PINSTECH),Islamabad 45650,PakistanAnn Microbiol (2010)60:75–80DOI 10.1007/s13213-010-0015-6al.2004).The enhanced biological activity of metal nanoparticles against microorganisms needs to be thor-oughly understood before they can be used in commercial products.There are some encouraging results showing the bioactivity of different drugs and antimicrobial formula-tions in the form of nanoparticles.The antibacterial and antifungal properties of copper, silver,titanium and zinc are effective in reducing the growth of various microorganisms(Lee et al.2003;Cioffi et al.2005;Raffi et al.2008).The antimicrobial efficacy of technologically appealing materials containing copper-based active powders or pigments in fabrics,paints or as coatings(Cioffi et al.2004),aqueous copper solutions (Avery et al.1996),complex copper species(Zoroddu et al. 1996)or copper-containing polymers has led to their use as antifungal compounds.Copper oxide(CuO)-containing phosphate-based glass fibers(PGF)have been developed for potential use in wound healing applications(Neela and Ahmed2005).The antimicrobial mechanism of nanomaterials can be understood by studying their specific binding to the surfaces of microorganisms and the consequent metabolism of such materials inside microorganisms.However,the development of effective antibacterial materials with tai-lored properties that are capable of delivering a controlled release of copper ions is still an open research area.Very little information is yet known about the antimicrobial properties of copper-based nanoparticles and nanocompo-sites(Chen and Chiang2008).The purpose of the present study was to investigate the antibacterial behaviour of copper nanoparticles against Escherichia coli ATCC-15224 in liquid as well as in solid growth media.The ultimate goal of this study was to provide experimental evidence to help understand the mechanism of interaction of copper nanoparticles with E.coli resulting in bacterial growth inhibition.Materials and methodsSynthesis of copper nanoparticlesCopper nanoparticles were synthesized from pure copper metal wire using an inert gas condensation(IGC)method.A process vacuum glass chamber was cleaned by achieving a base pressure of10−6Torr.Small cuttings of polycrystal-line copper wire(99.9%purity,Sigma-Aldrich,St.Louis, MO)were loaded in a molybdenum evaporation boat. Argon gas(99.99%purity)was introduced into the process vacuum chamber through a moisture trap at a pressure of 100mTorr.Copper atoms were evaporated by supplying electric current to the evaporation boat.A disc shutter over the evaporation boat was opened when super-saturation conditions were achieved.The particles formed in gas phase were allowed to deposit on a stainless steel flat surface cooled by flowing liquid nitrogen over it.The synthesized Cu0-nanoparticles were collected by brushing the stainless steel plate with a Teflon scraper.X-ray diffraction analysisCopper nanoparticles were characterized by X-ray diffrac-tion(XRD)using CuKαradiation(λ=0.154051nm)and a vertical wide-range goniometer equipped with a diffracted beam monochromator.Samples were scanned from30°to 80°of2θin increments of0.04°2θwith a4-s counting time.Transmission electron microscopy analysisFor transmission electron microscopy(TEM)analysis,the copper nanoparticles were suspended/dispersed in pure acetone by ultra-sonication and a few drops of particle suspension were placed onto carbon coated copper-grids and dried in a desiccator.TEM analyses were carried out in a JEOL-fx-2000microscope.TEM was used for estimation of crystalline structure,morphology and mean size of nanoparticles.Antibacterial activity testsTo study the bactericidal effect of copper nanoparticles against Escherichia coli ATCC-15224,the nanoparticles were dispersed in pre-sterilized deionized water by ultra sonication(model934,Yamato,Tokyo,Japan).A freshly grown axenic culture of E.coli(104cells/mL)was inoculated into flasks containing liquid nutrient growth medium(CM-01,Oxoid,Basingstoke,UK)supplemented with various concentrations of copper nanoparticles(20,40, 60,80and100μg Cu0/mL).These flasks were incubated at 37°C and150rpm on orbital shaking incubator.The total volume of liquid medium in each flask was kept at50mL. All experiments were performed in triplicate under sterile conditions.Samples were taken periodically from the flasks to measure optical density at a wavelength of625nm using UV-Vis spectrophotometer(model9453,Agilent,Wilming-ton,DE)to index growth of bacterium.After48h of incubation,liquid samples treated with nanoparticles in flasks were spread onto nutrient agar plates to observe the growth of E.coli as colony forming units(CFU).Scanning electron microscopy analysisBacterial cells treated with nanoparticles were collected by centrifugation(Microfuge-18,Beckman-Coulter,Fullerton,CA)of liquid medium at Relative Centrifugal Force (RCF)10700(average g-force)for 10min.The bacterial cell biomass was treated with gradients of ethanol for fixing on aluminium stubs which were air-dried in desiccators before coating with a thin layer of gold.Samples were analyzed by scanning electron microscopy (SEM:LEO-440i Oxford Microscopy,Oxford,UK).Atomic absorption spectroscopic analysisThe supernatants obtained after centrifugation of copper nanoparticles treated with the bacterium were analyzed using the standard atomic absorption spectroscopy (AAS)technique (Z-8000,Hitachi,Tokyo,Japan)to determine copper ion concentrations released into the growth medium.Results and discussionSynthesis and structural characterization of Cu 0-nanoparticlesInert gas condensation is one of the most widely used methods for synthesis of metal nanoparticles.In this process,a metallic or inorganic material is vaporized using thermal evaporation sources,electron beam evaporation devices or sputtering sources in an inert atmosphere of argon or helium gas to synthesize nanoparticles with better control over size,distribution and purity (Birringer et al.1984).An XRD diffractogram of copper nanoparticles is shown in Fig.1.The diffraction peaks of samples correspond to the characteristic face centered cubic (FCC)copper lines indexed as (111),(200)and (220)that were observed in these samples at diffraction angles of 43.2°,50.3°and 73.9°,respectively.A broad diffraction peak of cuprite (111)was observed at a diffraction angle of 36.2°.These diffraction peaks were similar in terms of angularpositions to that of FCC pure bulk copper crystalline peaks but were relatively broad,as the mean size of the particles was of the order of nanometers.Scherer ’s equation was used to estimate mean size of nanoparticles.d ¼0:9l b cos qwhere d is the mean diameter of nanoparticles,λis the wavelength of X-ray radiation source,βis the angular full width at half maximum (FWHM)of the X-ray diffraction peak at the diffraction angle (Cullity 1978).The mean size of copper nanoparticles estimated by XRD data was 12nm.A thin copper oxide passivation layer is believed to have formed on the surface atoms of copper nanoparticles,which prevented further oxidation of copper atoms inside.Mean particle size of the copper nanoparticles estimated by TEM was about 15nm,which compared well with that estimated by XRD data.The TEM micrograph of copper nano-particles shown in Fig.2shows agglomerated clusters of copper nanoparticles.Metal nanoparticles have a higher surface free energy,resulting into their agglomeration.It is an established fact that metal nanoparticles formed in a gas phase synthesis process follow the lognormal distribution function (LNDF;Granqvist and Buharman 1976).Bacterial growth inhibition mechanism of Cu 0-nanoparticlesOptical density at a fixed wavelength of 625nm of solutions containing different concentrations of copper3040506070801000200030004000(220)(200)(111)(111)R e l a t i v e I n t e n s i t y (a r b i t r a r y u n i t s )2θ Cuk αFig.1X-ray diffraction (XRD)diffractogram of copper nanoparticlesFig.2Transmission electron microscopy (TEM)micrograph of copper nanoparticles showing shape and particle size estimationnanoparticles was measured as a function of time (Fig.3).The number of bacterial colonies observed on solid nutrient agar plates was a function of copper nanoparticle concen-tration (Fig.4);CFUs were reduced significantly with increasing copper nanoparticle concentration in the growth medium.Virtually no growth of bacterial colonies was observed in samples containing copper nanoparticles at 60μg Cu 0/mL and above.The growth inhibition trend of E.coli observed by CFU values was in good agreement with the results of optical density measurement in liquid medium.The total soluble copper concentrations estimated by AAS in liquid medium are shown in Fig.5.This data clearly shows that the soluble copper concentration in-creased in liquid medium as the nanoparticle concentration in the growth medium increased,which inhibited bacterial growth.SEM of damaged bacterial cells upon incubation with copper nanoparticles revealed the formation of cavities and pits (Fig.6).The outer cell membrane of E.coli is constructed predominantly of tightly packed lipopolysac-charide (LPS)molecules,which provides an effective permeability barrier (Thiel et al.2007).Copper-containing compounds such as CuSO 4and Cu (OH)2are the traditional inorganic antibacterial materials (Hughes and Poole 1989).The overall charge of bacterial cells at biological pH-values is negative due to the excess of carboxylic groups present in the lipoproteins at the bacterial surface,which,upon dissociation,makes the cell surface negative (Stoimenov et al.2002).The opposite charges of bacteria and copper ions released from nano-particles are thought to cause adhesion and bioactivity due to electrostatic forces.Since peptidoglycans are negatively charged molecules,they bind Cu 2+ions released from copper nanoparticles in liquid growth medium.BeingGram-negative,the bacterium E.coli may allow more Cu 2+ions to reach the plasma membrane but is generally considered less susceptible to antibiotics and antibacterial agents than Gram-positive bacteria (Koch 1990).Bacterial cell growth enhances the turbidity of liquid nutrient medium because microbes have a higher refractive index than water,thus scattering incident light.The optical density of the growth medium was found to decrease compared to control solution with gradually increasing concentration of copper nanoparticles.Increasing concen-trations of copper nanoparticles caused a delay in bacterial growth,and higher concentrations of copper nanoparticles (100μg Cu 0/mL)were found to have an effective10203040500.00.20.40.60.81.01.2O p t i c a l d e n s i t yTime (h)Fig.3Optical density as a function of time in the solution studies with varying concentrations of copper nanoparticles (µg Cu 0/mL):■0,●20,▲40,▼60,♦80,◄100020406080100246810C F U 108Concentration of Cu 0µg/mLFig.4Antibacterial characterization of copper nanoparticles by colony forming unit (CFU)as a function of concentration on agar plates1020304050020406080100C u i n s o l u t i o n µg /m LTime (h)Fig.5Concentration of soluble copper released from copper nano-particles in liquid growth medium.Copper nanoparticles (µg Cu 0/mL):■20,●40,▲60,▼80,♦100bactericide effect on the growth of E.coli .At lower concentrations of nanoparticles,only a delay in the lag-phase was observed,which indicated that copper acted as a micronutrient for bacteria,whereas at higher concentrations bacterial growth ceased.The estimated concentration of Cu 2+ions released from the nanoparticles in liquid medium was highest in samples containing 100µg Cu 0/mL nano-sized copper particles.These results support the conclusion that growth inhibition of E.coli depends on the release of an appropriate copper ion concentration in liquid medium.It is logical to state that binding of copper nanoparticles to bacteria depends on the surface area available for interaction.As nanoparticles have a large surface area,their bactericidal efficacy is enhanced compared to large-sized particles;hence,they are believed to impart cytotox-icity to microorganisms (Stoimenov et al.2002).The mechanism by which nanoparticles are able to penetrate into bacteria is not understood completely but studies have suggested that when E.coli is treated with copper nano-particles,changes take place in its cell membrane morphol-ogy.An SEM micrograph of E.coli treated with copper nanoparticles (Fig.6)showed that bacterial cells changed from normal rod-shaped to having an irregular appearance after treatment with nanoparticles.Some bacterial cells were discovered even to have shrunk,the cell wall was found destroyed and uneven,and bacterial inner vacuoles were found to appear.An efflux of nutrients is believed to occur between the cell wall and the cell membrane,which widened,and the cytoplasm tends to concentrate.Copper ions have the capacity to kill bacteria by destroying their cell walls and membranes because they have a strong reduction ability,which can extract electrons from the bacteria,causing their cytoplasm to escape and oxidizing the cell nucleus.It is suggested that when copper nano-particles penetrate inside bacteria,they impart damage by interacting with phosphorus-and sulfur-containing com-pounds such as deoxyribonucleic acid (DNA)because they have a high affinity to react with such compounds.Cu 2+ions can combine with the plasma membrane by electro-static attraction and then penetrate the cell membrane through opening or closing of membrane channels.This alters the permeability of cellular membranes,which causes leakage of intracellular ions and low molecular weight metabolites.At the same time,Cu 2+ions entering cells combine strongly with intracellular amino acids and proteases,resulting in degeneration that leads ultimately to denaturation of proteins (Tong et al.2005).It is also considered that nanoparticles accumulating on the envelope proteins destabilize the outer cell wall,resulting in collapse of the plasma membrane potential and depletion of the level of intracellular ATP (Lok et al.2006).The antibacterial mechanism of copper nanoparticles has been attributed to the fact that Cu 2+ions eluted from nanoparticles are absorbed by bacteria when the nano-particles concentration is high enough.Copper ions are absorbed onto the bacterial cell surface,imparting damage to the cell membrane by solidifying protein structure or altering enzyme function (Ohsumi et al.1988;Dan et al.2005).Bacterial cells are immobilized and become inacti-vated by the presence of copper nanoparticles in the growth medium,which results in hampering of their replication process,with subsequent cell death (Hu and Xia 2006).Reportedly,recycling redox reactions between Cu 2+and Cu 1+are possible at the surface of E.coli cells,generating hydrogen peroxide,causing damage to the cytoplasmic membrane (Hoshino et al.1999).Under physiological conditions,the intracellular enzyme activity of bacteria treated with copper nanoparticles is believed to increase,suggesting that permeability of the cell membrane also increased,with bacteria suffering injury as a result.From these results,it is believed that binding of copper ions to the bacterial cell surface plays an important role in bactericidal activity (Hoshino et al.2000).Copper has the potential to disrupt cell function in multiple ways,since several mechanisms acting simultaneously may reduce the ability of microorganisms to develop resistance against copper (Michels et al.2005).These investigated mechanisms provide insight into the complicated antimicrobial action of copper nanoparticles.In conclusion,high concentrations of copper nanoparticles demonstrate complete cytotoxicity against E.coli .These nanoparticles adhere to the bacterial cell wall and penetrate through the cell membrane.Copper ions destroy the bacterial cell wall,which becomes thick and coarse,the cytoplasm is then degraded and disappears,leading finally to cell death.The antibacterial mechanism is attributed mainly to the strong adsorption of copper ions to bacterial cells,which imparts antibacterial efficacy in a concentration-dependent manner.Nanoparticles have a large surface-to-volumeratio,Fig.6Scanning electron microscopy (SEM)micrograph of Escher-ichia coli cells treated with copper nanoparticles showing pits/cavities in bacterial cell wallswhich enhances their bioactivity and makes them effective bactericidal agents.It is hoped that,in future,copper nanoparticles could replace some antibiotic medicines used to combat pathogenic bacteria in the gastrointestinal tract of animals.Acknowledgments The authors express their sincere gratitude and gratefully acknowledge Prof.S.Ismat Shah,Sajid Mehmood,M. Yasin,Moazam Iqbal and Iqtidar Shakoor for their support and technical assistance.A partial financial grant provided by the Higher Education Commission(HEC),Pakistan for this research work is gratefully acknowledged.ReferencesAvery SV,Howlett NG,Radice S(1996)Copper toxicity towards Saccharomyces cerevisiae:dependence on plasma membrane fatty acid composition.Appl Environ Microbiol62:3960–3966 Birringer R,Gleiter H,Klein HP,Marquardt P(1984)Nanocrystalline materials:an approach to a novel solid structure with gas-like disorder.Phys Lett[A]102:365–368Chen CY,Chiang CL(2008)Preparation of cotton fibers with antibacterial silver nanoparticles.Mater Lett62:3607–3609 Cioffi N,Torsi L,Ditaranto N(2004)Antifungal activity of polymer-based copper nanocomposite coatings.Appl Phys Lett85:2417–2419 Cioffi N,Torsi L,Ditaranto N,Tantillo G,Ghibelli L,Sabbatini L (2005)Copper nanoparticles/polymer composites with antifun-gal and bacteriostatic properties.Chem Mater17:5255–5262 Cullity BD(1978)Elements of X-ray diffraction,2nd edn.Addison-Wesley,ReadingDan ZG,Ni HW,Xu BF(2005)Microstructure and antibacterial properties of AISI420stainless steel implanted by copper ions.Thin Solid Films492:93–100Granqvist CG,Buharman RA(1976)Ultrafine metal particles.J Appl Phys47:2200–2219Hoshino N,Kimura T,Yamaji A,Ando T(1999)Damage to the cytoplasmic membrane of Escherichia coli by catechin-copper (II)complexes.Free Radic Biol Med27:1245–1250Hoshino N,Kimura T,Hayakawa F,Yamaji A,Ando T(2000) Bactericidal activity of catechin-copper(II)complexes againstStaphylococcus aureus compared with Escherichia coli.Lett Appl Microbiol31:213–217Hu CH,Xia MS(2006)Adsorption and antibacterial effect of copper-exchanged montmorillonite on Escherichia coli K88.Appl Clay Sci31:180–184Hughes MN,Poole RK(1989)Metals and microorganisms.Chapman &Hall,LondonKoch AL(1990)Growth and form of the bacterial cell wall.Am Sci 78:327–340Lee HJ,Yeo SY,Jeong SH(2003)Antibacterial effect of nanosized silver colloidal solution on textile fabrics.J Mater Sci38:2199–2204Levy S(1991)Antibiotic availability and use:consequences to man and his environment.J Clin Epidemiol44:83S–88SLok C,Ho C,Chen R(2006)Proteomic analysis of the mode of antibacterial action of silver nanoparticles.J Prot Res5:916–924 Mamunya YP,Zois H,Apekis L,Lebedev EV(2004)Influence of pressure on the electrical conductivity of metal powders used as fillers in polymer composites.Powder Technol140:49–55 Michels HT,Wilks SA,Noyce JO,Keevil CW(2005)Copper alloys for human infectious disease control.Presented at“Materials Science and Technology Conference”,25–28September2005, Pittsburgh,PANeela EAA,Ahmed I(2005)Characterization of antibacterial copper releasing degradable phosphate glass fibers.Biomaterials 26:2247–2254Ohsumi Y,Kitamoto K,Anraku Y(1988)Changes induced in the permeability barrier of the yeast plasma membrane by cupric ion.J Bacteriol170:2676–2682Raffi M,Hussain F,Bhatti TM,Akhter JI,Hameed A,Hasan MM (2008)Antibacterial characterization of silver nanoparticles against E.coli ATCC-15224.J Mater Sci Technol24:192–196 Stoimenov PK,Klinger RL,Marchin GL,Klabunde KJ(2002)Metal oxide nanoparticles as bactericidal ngmuir18:6679–6686Thiel J,Pakstis L,Buzzby S,Raffi M,Ni C,Pochan DJ,Shah I(2007) Antibacterial properties of silver-doped titania.Small3:799–803 Tong G,Yulongb M,Peng G,Zirong X(2005)Antibacterial effects of the Cu(II)-exchanged montmorillonite on Escherichia coli K88 and Salmonella choleraesuis.Vet Microbiol105:113–122 Zoroddu MA,Zanetti S,Pogni R,Basosi R(1996)An electron spin resonance study and antimicrobial activity of copper(II)-phenan-throline complexes.J Inorg Biochem63:291–300。