DS7100 LH ESAB
博世MIC IP ultra 7100i 加固型PTZ摄像机商品说明书
视频 - MIC IP ultra 7100iMIC IP ultra 7100iIVAu UHD“4K”清晰度（3840 x 2160像素），30fps，12倍变焦，具有光学图像稳定(OIS)功能u 非常牢固耐用，适合任何室外应用，包括交通监控（桥梁、隧道或高速）、周界防护、城市监控和采矿u 内置Camera Trainer，用于对摄像机进行训练，以识别用户指定的目标物体（例如，移动和静止物体），从而在发生异常场景活动时提醒操作员u 具有Intelligent Tracking和对象探测功能（即使在摄像机移动时）的边缘智能u 可选照明灯，具有多光谱LED，可将红外灯光均匀投射到区域中，以避免场景出现暗处或过度照明MIC IP ultra 7100i是少数具有UHD（“4K”）清晰度的加固型PTZ摄像机，可在恶劣环境中提供出色的成像和可靠性。
该摄像机采用坚固耐用的设计，功能超出传统IP摄像机，满足了客户在苛刻环境中的使用需求。
即使安装于冲击强烈、振动剧烈和/或恶劣天气中，摄像机也能提供上乘的视频图像。
该摄像机是以下应用的理想选择：•交通运输：高速公路、桥梁/隧道和港口•关键基础设施：发电/输电设施、炼油厂/管道，和采矿设施•高安全性：政府设施和数据中心•需要高清晰度成像并位于恶劣环境中的任务关键型应用•光照条件变化多端且细节繁杂的复杂场景•由于服务成本高而需避免停机的系统功能结实耐用的设计，适用于极端应用场合对于传统定位系统的机械性能无法应付的监控应用场合，该摄像机的设计使其可持续运作。
整个金属机身经过电镀处理，设计巧妙，能承受高强度低频振动。
该摄像机型号在耐冲击性方面符合IK10标准，在抗振动和撞击方面符合IEC 60068标准。
该摄像机具有闭环定位系统。
此系统使摄像机能够在连续振动下或受到重度撞击后，即使不经过复位或预置位校准也能保持位置不变。
该摄像机在材料工程和涂层方面受益于博世所在领域的知识。
ESAB AUT-1034 07 13A6S和A6DS双头焊接头说明书
ESAB Welding and Cutting ProductsUSA: / 1.800.ESAB.123 | Canada: www.esab.ca / 1.877.935.3226 | Mexico: .mx / (81) 8305-3700A U T -1034 07/13A6S and A6DS Tandem Welding Heads For Heavy Construction WeldingWeld with DC/DC, DC/AC or AC/ACUses A2-A6 PEK process controller for quickand accurate programming of welding parameters for each torch Feedback system gives high and consistent welding quality from start to finish, saving time and money Versatile positioning through easy to use, complete slide assembly for welding torch position, distance stick-out, and angle on both leading and trailing torches Enhance productivity by adding optional equipment such as T win Wire and ICE ™ (Integrated Cold Electrode) systems Adjustable +90° interval turning bracket and cross slide Automatic joint tracking keeps the weld in the joint no matter which direction welding occurs Available in two basic versions:1. A6S Tandem Master - optimized for welding across multiple perpendicular axes and is key in the welding of cylindrical objects where both longitudinal and circumferential welding is required2. A6DS Tandem Master - optimized for welding in multiple directions and is key in the automated welding of long weld joints such as beams and girders Welding heads can be equipped with a standardwire feed unit (gear ration 156:1) or with a high-speed wire feed unit (gear ratio 74:1)Ordering InformationA6S Tandem Master, standard (156:1) ............0818971880A6S Tandem Master, high-speed (74:1) ..........0818971881A6DS Tandem Master, standard (156:1) ..........0818970880A6DS Tandem Master, high-speed (74:1) .. (0818970881)Options & AccessoriesTwin kit (one per torch) ....................................0809934882GMH, joint tracking with remote .....................0460884880GMH, joint tracking with control panel ............0460884881GMH, slide motor cables, 16.4 ft. (5 m) ...........0461215880Laser lamp kit, cable, 23 ft. (7 m) .....................0821440883Bracket (straight) for wire ................................0334318880Brake hub, for wire reel ...................................0146967880Wire reel, plastic, 66 Ibs. (30 kg) ......................0153872880Wire reel, steel, fixed width, 66 Ibs. (30 kg) ......0416492880Wire reel, steel, flexible width, 66 Ibs. (30 kg) ..0449125880。
安捷伦7100毛细管电泳系统说明书
Agilent 7100 Capillary Electrophoresis SystemHighest sensitivity. Highest productivity. Minimal footprint.Features •Most sensitive CE system on the market•Replenishment system allows high throughput and unattended operation •Easy maintenance and automated instrument diagnostics •Plug & play connectivity to all Agilent MS systems •Easy method setup data analysis •Regulatory compliance tools•Comprehensive offering of accessories and consumables •Partner solutions for LIF and electrochemical detectionBenefits •Best in class analytical performance•Broadest selection of detectors in the industry •Legendary Agilent reliability•Reverse-compatible with the Agilent HPCE •Increased uptime•Flexible separation modes including capillary electrochromatography•CE-MS support from the leading vendor with the longest CE-MS experience •Broad application coverage•Complete solution for charged sample analysisCapillary Electrophoresis (CE) offers fast separations with exceptional efficiency and resolution for analytical challenges that often can only be met with difficulty by LC. Used in standalone mode, as the separations component of a CE/MS, or as a complementary,orthogonal technology to LC, the Agilent 7100 CE system brings un-precedented HPLC-like sensitivity to a wide range of analytical challenges.In addition, CE offers the advantage that several separation modes can be run on a single instrument. This makes CE a very versatile technique for a broad range of applications and separation challenges.Application AreasCE is used to separate, identify, quantify and fractionate compounds in:•Environmental analysis •Food safety •Forensics• Pharmaceutical discovery, development, and QA/QC •Life Sciences/chem/ce© Agilent Technologies Inc., 2014-2015 Published April 1, 2015Publication Number 5990-3962ENPressure systemProgrammable with –100 to +100 mbar on inlet Flushing with 1 bar or with high pressure 2–12 bar Vial pressurization with high pressure 2–12 bar on inlet and/or outletInjection modesSelf correcting injection system with injection from inlet or outlet Programmable range: up to 10,000 seconds Pressure: –100 to +100 mbar Electrokinetic: –30 to +30 kV Autosampler/ fraction collector 50-position carouselAll vials are randomly accessible from inlet or outlet end of capillary.Temperature control with external waterbath with vial temperature from 10–40 °C.(Non-condensing conditions, minimum waterbath temperature +1 °C).ReplenishmentSatellite station for refilling of inlet or outlet buffer vials with fresh buffer for automatic, continuous operation. Selectable buffer levelling.Vials100 µL (polypropylene or glas) with resealing snap caps 1 mL (polypropylene) with resealing snap caps 2 mL (glas) with resealing snap capsCapillary cassetteHigh-speed forced-air cooler with Peltier element Temperature range: 10 °C below ambient, up to 60 °C (min. 10 °C cassette temperature)Minimum total capillary length: 31 cm Capillary compatibility 365 µm o.d.DetectorReal time UV-Visible diode-array detector (190–600 nm)Temperature controlled Wavelength resolution: 1 nm Response time: 0.025 to 10 sLight source: prealigned deuterium or high brightness lampSignals: up to eight signals simultaneously, full spectral acquisition with Agilent ChemStation Sensitivity: 1 µM 4-hydroxy-aceto-phenon injected at50 mbar • 5 sec, 3 x 50 µm bubble cell capillary, signal/noise >6* (20 mM borate buffer pH 9.3, 25 kV)Baseline noise: <50 µAULinear dynamic range: 1x104(3 x 50 µm bubble cell capillary)** typical value **upgradeableRaw data channelsDetector signals and spectrum, voltage, current, leak current, power, cassette temperature, pressure, lamp voltage and detector temperatureDiagnostic functionsRFID tag for lamp, early maintenance feedback, supported by Agilent Lab Advisor software with integrated diagnosis test suite Safety featuresCurrent leak detection: low current limit Liquid leak sensorSafety sensors at door and cover disabling high voltage Vial sensorEnvironmentTemperature: 5–40 °C Humidity: up to 80 % rel. humidity at 31 °C (non-condensing)System control Operating system:- Windows 7 SP1 (32-bit or 64-bit, Professional or Enterprise)- Windows 8.1 (32-bit or 64-bit, Professional or Enterprise)Time programmable parameters: voltage, current, power, polarity, pressure, inlet and outlet vial, capillary temperature, pre and post-run conditioning with pressure and/or voltage,Replenishment, fraction collection**CE specific softwareMobility report, time corrected areas, pI calibration and bio polymer size calibration.Physical Specifications。
海康技术参数-最全
DS-2CD3T45DP1-I
400万像素广角筒型网络摄像机，支持H.265/smart265编码，支持最远红外10米，120dB宽动态，水平视场角180°，垂直视场角: 93°
1.68mm
DS-2CD3345P1-I
400万像素广角海螺型网络摄像机，支持H.265/smart265编码，支持PoE，支持最远红外10米，120dB宽动态，水平视场角180°，垂直视场角: 93°
4/6mm
DS-2CD3347WD-L
400万1/2.7"CMOS全彩半球形网络摄像机，支持PoE供电，报警Smart265编码，支持Smart265编码
4/6mm
智眸系列智能警戒摄像机
DS-2CD3T26DWDA1-I
200万1/2.7”CMOS智能摄像机，0.002 Lux，支持H.265/smart265编码
DS-2CD3347FDWD-LS
400万1/2.7" CMOS全彩半球形网络摄像机，支持音频输入/输出接口、报警Smart265编码，支持120 dB宽动态，支持Smart265编码
4/6mm
DS-2CD3347FWD-LS
400万1/2.7" CMOS全彩半球形网络摄像机，支持PoE供电，支持音频输入/输出接口、报警Smart265编码，支持120 dB宽动态，支持Smart265编码
4/6/8/12mm
DS-2CD3T26WD-I3(B)
200万星光级1/2.7”CMOS ICR日夜型筒型网络摄像机，最远红外30米，H.265/smart265编码，支持智能报警，支持PoE
4/6/8/12mm
DS-2CD3T26WD-I5(B)
200万星光级1/2.7”CMOS ICR日夜型筒型网络摄像机，最远红外50米，H.265/smart265编码，支持智能报警，支持PoE
ucd7100用法
ucd7100用法
UCD7100是一款数字控制兼容驱动器，适用于采用数字控制技术或需要快速本地峰值电流限制保护的应用。
其具体使用方法包括以下步骤：
1. 连接：通过USB接口与计算机连接，作为一个完整的开发环境，可以使用相关的开发工具进行软件编程和调试。
2. 编程：利用开发板上的GPIO（通用输入输出）接口，方便连接和控制外部设备，如传感器、执行器等。
3. 调试：开发板还具有丰富的通信接口，例如以太网口、无线通信模块、蓝牙等，可以实现与其他设备或云平台的数据传输和远程控制。
4. 选择操作系统：根据项目需求选择适合的操作系统，如Linux、Windows等。
5. 电流控制：UCD7100具有电流感应功能，可以提供逐周期电流限制功能，具有可编程阈值和数字输出电流限制标志，可由主控制器监控。
6. 保护：通过快速的25ns逐周期电流限制保护，驱动器可以在数字系统无法及时响应故障情况的情况下关闭功率级。
7. 驱动：UCD7100输出级采用TrueDrive™输出架构，在开关转换的米勒平稳区域内，可为MOSFET的栅极提供±4A的额定电流。
8. 供电：它还包括一个3.3V,10mA线性稳压器,为数字控制器供电。
9. 兼容性：UCD7000驱动器系列兼容DSP,微控制器或ASIC的标准3.3VI /O端口。
在使用UCD7100时，应关注其工作电压、输出电流等参数，以确保其正常工作并避免对电路造成损害。
同时，还需要注意遵守相关的电气安全规范，确保作业安全。
Bridgelux Pallas-D单频道44W（DALI-2）砂流驱动器产品数据报告 DS1210
®Pallas-D Single Channel 44W (DALI-2)Product Feature MapBridgelux Pallas-D (DALI) Single Channel 44W Driver provides dynamic constant current output for LED modules and arrays. This Driver interoperates with DALI-2 standard lighting systems and protocols and allows for simple integration of Bridgelux’s and all major brands White Arrays and Linear modules. Please visit for more information.The part number designation for Bridgelux Pallas-D (DALI) Single Channel 44W Driver is explained as follows:Product NomenclaturePart NumberConfigurationBXDR-PS-44BS-E110D-01-ABrick with strain relief built-inTable 1:Product Selection GuideLED OutputEU input 220-240VAC4 Dip-switch (16 steps)DALI-2 DT 6 ControlCase temperature measurement point TcBXDR44BSE110D01A----Housing MaterialP = Plastic Maximum Output PowerProduct Family BXDR = Driver 44 = 44WForm FactorB = BrickConnector Type S = Strain ReliefInput Voltage E = EU 220-240VACOutput Channels 1 = Single ChannelMaximum Output Current x 100mA 10 = 1050 mAControl InputD = DALI-2 ControlProduct Version 01 = Standard Product Generation 1,2,3,47,8,9,1011,12,13,14,1516,1718A = Generation APS -5,6Current SettingS = Dip-Switch SettingTable 2:Input Electrical CharacteristicsTable 3:Output Electrical Characteristics Parameter Unit Specification Nominal voltage V 220 –240Nominal frequency Hz 50 / 60AC voltage range V 198 –264DC voltage range V 176 -276Nominal current A 0.3Power factor (Full load)-≥ 0.9THD (Full load)%≤ 10Efficiency (Full load)%≥ 88NO load W ≤ 0.5Protection class -I, IIInrush current(Coldstart)A pk < 5.6 (th = 50 μs)Max. units per circuit breaker-B10: 37 B16: 59 C10: 37 C16: 59Parameter Unit SpecificationNominal voltagerange V6-52V6-49V6-46V 6-44V 6-42VMaximumvoltage(Open Circuit)Vdc≤ 59Nominal current mA 30035040045050055060065070075080085090095010001050Current accuracy%+/-5Dimming YesDALI-2（IEC 62386-101,102,207）& Push DimDimming Range 1% -100%Current ripple LF< 3KHz %≤ 4Pst LM -≤ 1SVM -≤ 0.4Maximum power W 44Galvanic isolation:SELV-SELVFigure 1:Power Factor vs. Power Figure 2:Total Harmonic Distortion vs. PowerFigure 3:Efficiency vs. Power Figure 4:Expected Life TimeFigure 5:Operating WindowMechanical CharacteristicsCharacteristics SpecificationDimensions 170.0 mm (L) x 65.0 mm (W) x 30.0 mm (H)Enclosure MaterialsPC Plastic Weight 188 g Ingress ProtectionIP20Table 4:Product Mechanical dataPackagingParameters Specification Driver quantity 60 pcsOuter dimensions353 X 335 X 220 mmWeight12.0 kgTable 5:Packaging Box ConfigurationFigure 6:Mechanical DrawingNotes for Figure 6:1.Drawing dimensions are in millimeters2.Unless otherwise specified, all linear tolerances are +/-1.0mmDIP-switch operation instructions & operating windowTable 6:Dip-switch operation instructions & operating windowDip-switch settingU out I out 1234OFF OFF OFF OFF6-52V300 mA OFF OFF OFF ON6-52V350 mA OFF OFF ON OFF6-52V400 mA OFF OFF ON ON6-52V450 mA OFF ON OFF OFF6-52V500 mA OFF ON OFF ON6-52V550 mA OFF ON ON OFF6-52V600 mA OFF ON ON ON6-52V650 mA ON OFF OFF OFF6-52V700 mA ON OFF OFF ON6-52V750 mA ON OFF ON OFF6-52V800 mA ON OFF ON ON6-49V850 mA ON ON OFF OFF6-49V900 mA ON ON OFF ON6-46V950 mA ON ON ON OFF6-44V1,000 mA ON ON ON ON6-42V1,050 mAWiring DiagramNotes for Table 7:1.Hot plug-in or secondary switching of LEDs is not permitted and may cause a very high current to the LEDs.2.Unless otherwise specified, all linear tolerances are +/-1.0mmPRIPRICable cross-section0.75 –2.5 mm 2 / AWG 18 -13Stripping 8 -9 mmSECCable cross-section0.5 –1.5 mm 2 / AWG 20 -15Stripping8 -9 mmTable 7:WiringEnvironmental and Regulatory StandardsParameter Specification Ambient Operating Temperature-20°C to + 45°C Max. Case Temperature Tc+85°C(max)Max. Case Temperature (In fault condition)+110°CHumidity Rating Maximum 95% Relative Humidity, non condensing Storage Temperature -20°C to + 80°CExpected Lifetime 50,000 hours (Tc < 85°C) 100,000 hours (Tc < 75°C)Table 8:Environmental ConditionsTable 9:Regulatory Approvals and ComplianceSpecification Reference Standard ConditionDC or AC supplied electronic controlgear for LED modules EN 62384:2006/A1:2009electronic controlgear for use on DC or ACsupplies up to 1 000 V (alternating current at50 Hz or 60 Hz) and with an output frequencywhich can deviate from the supply frequencyConducted and Radiated EMI EN 55015:2019+A1:2020 (CISPR 15:2018)Harmonic CurrentEmissionsEN IEC 61000-3-2:2014Voltage Fluctuations &FlickerIEC 61000-3-3:2013ESD (Electrostatic Discharge)IEC 61547:2009 Section 5.2Test des.: IEC 61000-4-24 kV contact discharge,8 kV air discharge, level 3Continuous Radiated Disturbance IEC 61547:2009 Section 5.3Test des.: IEC 61000-4-33 V/m, 80 -1000 MHz, 80% modulated atdistance of 3 metersElectrical Fast Transient IEC 61547:2009 Section 5.5Test des.: IEC 61000-4-4±1 kV on AC power port for 1 minute,Surge IEC 61547 Section 5.7Test des.: IEC 61000-4-5±1 kV (differential mode)Continuous Conducted Disturbance IEC 61547:2009 Section 5.6Test des.: IEC 61000-4-63V, 0.15-80 MHz, 80% modulated, Level 2Voltage Dips IEC 61547 Section 5.8, 5.9Test des.: IEC 61000-4-1170% dip during 25 cycles @ 50Hz, 30 cycles @ 60Hz 0% dip during ½ cyclesRegulatory Standards (continued)Table 10:Safety Agency ApprovalsSpecification Reference Standard ConditionENEC / CE / UKCA EN 61347-1:2015,EN 61347-2-13:2014/A1:2017ENEC Certification pendingGlow wire test EN 61347-1:2015Passed with increased temperature at 650°CTable 11:DALI-2 DT6 StandardsSpecification Reference Standard ConditionSystem Components(Part 101)EN62386-101Control Gear (Part 102)EN62386-102LED Module (Part 207)EN62386-207ProtectionParameters Specification Over Power Protection>50WYes / Auto Resume Over Voltage Protection> 59VdcYes / Auto Resume Short Circuit Protection Yes / Auto ResumeOver-TemperatureTa > 80°CYes / Auto Resume Table 12:ProtectionDesign ResourcesApplication NotesPlease contact your Bridgelux sales representative for assistance on obtaining application support when designing with the Bridgelux Pallas-D Single Channel Driver. For a list of available resources, visit .PrecautionsCAUTION: PRODUCT HANDLINGHandle the Pallas-D Single Channel Driver with care to prevent any damage from mechanical shockIt is recommended to handle this driver in a static-free environmentDo not open or disassemble the productTo maintain product warranty, the installer is responsible for ensuring that the driver's operating conditions do not exceed the maximum conditions stated within this data sheetCAUTION: PRODUCT INSTALLATIONIncorrect installation of the Pallas-D Single Channel Driver can cause irreparable damage to the driver, connected LEDs.Pay attention when connecting the LED load and observe the correct polarity of the output terminals as specified in this data sheet and on the driver label.CAUTION: ELECTRIC SHOCKBe aware of the possibility of an electric shock hazard which can result in serious injury or death. Disconnect power before servicing or installing this device.DisclaimersMINOR PRODUCT CHANGE POLICYThe rigorous qualification testing on products offered by Bridgelux provides performance assurance. Slight cosmetic changes that do not affect form, fit, or function may occur as Bridgelux continues product optimization.About Bridgelux: Bridging Light and Life TM11At Bridgelux, we help companies, industries and people experience the power and possibility of light. Since 2002, we’ve designed LED solutions that are high performing, energy efficient, cost effective and easy to integrate. Our focus is on light’s impact on human behavior, delivering products that create better environments, experiences and returns—both experiential and financial. And our patented technology drives new platforms for commercial and industrial luminaires.For more information about the company, please visit/Bridgelux/Bridgelux/user/Bridgelux/company/bridgeluxWeChat ID: BridgeluxInChina46410 Fremont BlvdFremont, CA 94538 USATel (925) 583-8400© 2022 Bridgelux, Inc. All rights reserved 2022. Product specifications are subject to change without notice. Bridgelux, the Bridgelux stylized logo design and Pallas-D are registered trademarks of Bridgelux, Inc. Bridging Light and Life is a trademark of Bridgelux, Inc. All other trademarks are the property of their respective owners.Bridgelux Pallas-D (DALI) Single Channel 44W Driver Product Data Sheet DS1210 Rev. A (03/2023)。
ESAB A6S Tandem Master和A6DS Tandem Master双流程沉浸焊接头说
ESAB Tandem Welding Heads For optimum productivityIn today’s industrial development, the rate of productivity has been brought more and more into focus as a decisive parameter for raising profitability.This requires submerged-arc welding heads designed for maximum flexibility to perform to the individual needs of the welding industry. ESAB has designed a number of highly versatile tandem welding heads aimed for extremely productive sub-arc welding. There are two basic versions of our range of tandem welding heads,A6S Tandem MasterWith an adjustable +90°-interval turning bracket and cross slide, the A6S’design is optimal for welding across multiple perpendicular axis’. The automatic joint tracking is kept intact no matter which direction welding occurs. (Important for cylindrical objects where both longitudinal and circumferential welding are needed.)A6DS Tandem MasterThis welding head has an adjustable ±90°-interval turning bracket and fixed cross slide. The A6DS is perfect for applications requiring automated welding of long weld joints. For example, when sub-arc welding long beams, use the A6 DC to weld one seam, rotate the head 180°and then weld the other seam. There’s no need to return the manipulator to its starting point which wastes time. Furthermore, by installing this head onto an ESAB CaBM-model manipulator and using the Shift Option it is possible to weld in multiple directions through this simple weld head adjustment. The Shift Option facilitates this process by shifting control of the horizontal tracking motion to the boom. This provides the operator with the ability to weld in three different directions in combination with the welding head rotation. In all directions, the automatic joint tracking still remains intact.Both the A6S and A6DS are equipped with two A6 welding torches for DC/DC, DC/AC or AC/AC welding operation. While taking advantage of direct current (DC) control (good weld penetration) and alternating current (AC) control (high welding deposition rate), ESAB sets the stage for high quality and high output productivity. With ESAB’s Twin-Wire and synergic Cold-Wire welding technology the focus on productivity is further expanded. XA00119120A6S Tandem TwinA6S TandemA6DS Tandem The A6S Tandem Welding Heads connect easily to ESAB´s range of thyristor controlled power supplies. With each welding head, ESAB’s PEH microprocessor-based Process Controller controls and stores all welding parameters and can be quickly and accurately programmed via menus. Up to ten weld parameter files can be stored and called-up eliminating time consuming adjustments by the operator during welding. For close monitoring during welding, the heat input is also displayed.Together with ESAB´s range of CaB460 and 600 column and boom models, these welding heads provide a very versatile welding system which mold to most any standard and special welding application.Technical dataBasic modules A6S Tandem MasterESAB ABWelding EquipmentSE-695 81 LAXÅSWEDEN Phone: +46 584 81000Fax +46 584 411721E-mail:************ESAB reserves the right to alter specifications without prior notice ESAB is approved according to ISO 9001:20002006-05-31A6 feed unit HD-type for wire 3.0-6.0 mm (2 pcs.)Horizontal motorised slide with double runners L=355 mm (1 pc.)Vertical motorised slide with double runners L=595 mm (1 pc.)PEH, process controller (2 pcs.)Flux hopper, 10L incl. bracket (1 pc.)Cable holder (1 pc.)Welding head (2 pcs.), each head has:A6 manual slide L=90 mm (1 pc.)(0154 465 880)A6 circular slide (1 pc.)(0671 171 580)Insulators (4 pcs.)(0278 300 180)Main bracket with mounting flange for cross slide assembly (1 pc.)(0810 786 880)Swivel bracket for rotating head 90°(1 pc.)(0334 549 880)Total weight approx. 215 kg (excl. PEH, wire and flux)Technical dataBasic modules A6DS Tandem MasterA6 feed unit HD-type for wire 3.0-6.0 mm (2 pcs.)Horizontal motorised slide with double runners L=355 mm (1 pc.)Vertical motorised slide with double runners L=595 mm (1 pc.)PEH, process controller (2 pcs.)Flux hopper, 10L incl. bracket (1 pc.)Cable holder (1 pc.)Welding head (2 pcs.), each head has:A6 manual slide L=90 mm (1 pc.)(0154 465 880)A6 circular slide (1 pc.)(0671 171 580)Insulators (4 pcs.)(0278 300 180)Swivel bracket for rotating head 90°(1 pc.)(0809 873 880)Total Weight approx. 190 kg (excl. PEH, wire and flux)AccessoriesTwinkit LD (one kit per torch)0809 934 880Twinkit HD (one kit per torch)0809 934 881Bump protection 0451 404 880GMD, joint tracking 0417 142 880Pilot lamp, light bulb 0153 143 885Pilot lamp, laser diode 0457 788 884Bracket, (straight) for wire 0334 318 880Brake hub, for wire reel 0146 967 880Wire reel, plastic, 30 kg0153 872 880Wire reel, steel fixed width, 30 kg 0416 492 880Wire reel, steel flexible width, 30 kg 0449 125 880Ordering informationA6DS Tandem Master (gear ratio 156:1)0809 939 880A6DS Tandem Master (gear ratio 74:1)0809 939 881A6S Tandem Master (gear ratio 156:1)0809 940 880A6S Tandem Master (gear ratio 74:1)0809 940 881Customised solutions are available. Please contact your local ESAB representative for further information.Part numbers in parentheses are included in the package.A6S Tandem MasterA6DS Tandem Mastermin 70max 1307301200780m a x 935m i n 80 / m a x 675R920960801min 140 / max 495straight min 80max 1701480m i n 385 / m a x 980。
北京大华无线电仪器有限责任公司 2018产品目录说明书
2018PRODUCT CATALOG北京大华无线电仪器有限责任公司（简称：大华电子，原国营768厂），始建于1958年，2018年北京大华电子将迎来60岁华诞。
作为我国最早建成的微波测量仪器大型军工骨干企业，大华人以发展中国测量仪器工业为已任，专注于测试仪器行业，奋勇前行，不断创新。
目前产品已覆盖精密电子测量仪器、自动化测试系统、行业应用解决方案等数百种产品，并广泛应用于军工、科研、高校、通讯、工业控制、汽车电子、新能源等领域。
作为国产测量仪器行业的首创者和领航者，在过去60年间，大华人为客户提供了高质量产品和服务，同时，也为行业的培育、规范、发展做出了自己应有的贡献。
近年来，随着市场需求的不断升级和市场竞争的不断加剧，大华人持续创新，主动求变，引领和推进产业升级。
深入学习贯彻党的十九大精神，“不忘初心，牢记使命”，大华将传承多年的行业经验，通过研发平台升级，致力于高端测量仪器的开发和新行业的测试解决方案的拓展，为新老客户提供全方位的服务。
2018年，将是大华人新的起点，我们将深入持续创新，全面升级迎发展，继续与终端客户、合作伙伴紧密合作，加强军民融合和产学研深度融合，不断推进民用测试仪器的研制开发和高校研究成果的转化，进一步为工业市场提供更具稳定实用的仪器设备及解决方案，为国防建设、电子测量仪器事业的发展做出更大的贡献。
可靠性设计：简化、冗余设计并采用成熟技术方案，MTTF≥5000hrs。
维修性：采用单元模块化设计，便于拆卸、安装，对部件标准化设计，增加产品的互换性。
MTTR≦30min。
保障性：提供全套设备维修手册，并按需为使用及维修人员开展专业培训。
测试性：简化测试及调试设计，提高软件自检功能，提高测试效率。
安全性：确保无害输出，无易碎材质，产品在使用及损坏时不会造成人身伤害。
环境适应性：全部优选合格供应商产品，电子元器件筛选并降额使用。
交、直流分离设计，并采用有效材料增加电磁屏蔽效果。
ICP DAS I-7017R 8-ch Voltage and Current Input DAQ
I-7017R - 8-ch Voltage and Current Input DAQ Module - QuickStart (May/2020)ICP DAS USA, Inc. | | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717I-7017R8 Channels Voltage & Current InputData Acquisition ModuleQuick Start GuideProduct Website:https:///i_7017_r.html/dcon_utility_pro.htmlIntroductionThe I-7017R is an 8-channel analog input module with an extremely high quality protection mechanism where the overvoltage protection is 240 Vrms. The input type includes both voltage and current. The sampling rate of the I-7017R is adjustable, meaning that either fast mode or normal mode can be selected. The I-7017R also has 4 kV ESD protection as well as 3000 VDC intra-module isolation. The I-7017R-A5 is an 8-channel analog input module that is especially designed for high voltage input, and has an input range of between -50 V ~ +50 V or -150 V ~ +150 V.Packing ListI-7017RPlastic RailCDQuick Start GuideI-7017R - 8-ch Voltage and Current Input DAQ Module - QuickStart (May/2020)ICP DAS USA, Inc. | | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717⏹Internal I/O Structure < I-7017R >⏹Pin Assignments < I-7017R, I-7017R >⏹Internal I/O Structure (I-7017R)⏹Modbus Table (M-7017R only)Address Description R/W 10129 ~Over/under range status of channel 0R 10136to 7 for 4 ~ 20mA or 0 ~ 20mA ranges 00129 ~0013630001 ~Analog input value of channel 0 to 7R 3000840001 ~4000840481Firmware version (low word)R 40482Firmware version (high word)R 40483Module name (low word)R 40484Module name (high word)R 40485Module address, valid range: 1 ~ 247R/W 40486Bits 5:0R/WBaud rate, 0x03 ~ 0x0ACode0x030x040x050x06Baud1200240048009600Code0x070x080x090x0ABaud192003840057600115200Bits 7:600: no parity, 1 stop bit01: no parity, 2 stop bit10: even parity, 1 stop bit11: odd parity, 1 stop bit40487Type code R/W Address Description R/W 40488Modbus response delay time in ms,R/W valid range: 0 ~ 3040489Host watchdog timeout value, 0 ~R/W 255, in 0.1s40490Channel enable/disable, 00h ~ FFh R/W 40492Host watchdog timeout count, write 0R/W to clear00257Protocol, 0: DCON, 1: Modbus RTU R/W 00259Filter setting, 0: 60Hz rejection, 1:R/W 50Hz rejection002611: enable, 0: disable host watchdog R/W 00269Modbus data format, 0: hex, 1:R/W engineering00270Host watch dog timeout status, write R/W1 to clear host watch dog timeoutstatus002711: enable, 0: disable fast mode R/W 00273Reset status, 1: first read after R powered on, 0: not the first read afterpowered on⏹DCON ProtocolFunctions Command Response NotesRead module name$AAM!AA(Data)AA: address number Read module firmware version$AAF!AA(Data)Read all analog input data#aa>(data)Read analog input data of each channel (<=16 channel)#aai>(data)i: channel number (Hex) Read analog input data of each channel (>16 channel)#aaii>(data)ii: channel number (Hex) If you want to know the detail DCON protocol, please check it from CD or webCD path: \\napdos\7000\manual\Web: ftp:///pub/cd/8000cd/napdos/7000/manual/I-7017R - 8-ch Voltage and Current Input DAQ Module - QuickStart (May/2020)ICP DAS USA, Inc. | | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717I-7017R - 8-ch Voltage and Current Input DAQ Module - QuickStart (May/2020)ICP DAS USA, Inc. | | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717⏹Module test and configurationStep 1: INIT switch Operation Step 2: Install & Run DCON Utility 1. Please Install DCON Utility firstYou can find the software in the CD.CD path:<Driver>:\napdos\driver\dcon_utility\Web link:/pub/cd/8000cd/napdos/driver/dcon_utility/ 2. Run DCON utility1. Find out the INIT switch( back of the module),and turn to INIT.2. Reboot the moduleStep 3: Set search configuration & search module Select COM Port Number1. Click “COM Port”2. Assign the communication information and click“OK”Module Default Setting COM Port Refer converter Port Number Baud Rate 9600ProtocolDCON for I-7000Modbus RTU for M-7000Parity Option N,8,13. Click “Search” and select “Start Searching”Software will search the modules from COM Port 4. Click “Search“ and select “stop searching”Manual stop when the modules searchedNote:When no module can be searched, please check the wire and communication informationStep 4: Select Module for testing and configurationDouble click “select module”Step 5: Configuration Settings & Channel SettingsChannel StatusModule SettingsProtocol DCON / ModbusAddress1~255 (0:INIT)Baud rate1200~115200Parity option N,8,1Input range Depends on signalsourcesStep 6: Change to normal mode and keep the settings1.Turn the INIT Switch to Normal.2.Reboot the moduleI-7017R - 8-ch Voltage and Current Input DAQ Module - QuickStart (May/2020)ICP DAS USA, Inc. | | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717Trouble ShootingQ1. How to do when forgot module address or baud rate?Please turn to INIT mode, and run DCON Utility to search.The module supports DCON protocol at the INIT mode.And the address is 0. The communication setting is “9600,N,8,1”.Q2. How to configure the I-7000 and M-7000 modules?ICP DAS provide DCON Utility to configure I-7000 and M-7000 modules.Please download the last version from: /pub/cd/8000cd/napdos/driver/dcon_utility/Q3. How to calibrate the analog input module?Usually it is not necessary to calibrate the analog input module.However, in case you need to perform this operation, we provide a function to calibrate the module.Please refer to user manual 1.10.Notice:1.Please update DCON Utility to version 5.2.3 or more.2.Keep the module running more than 30 minutes to warm-up.Q4. How to measure the current?I-7017R and I-7017R require optional external resistance (125Ω) for current measurement.Please refer wired connections diagram.And then select a suitable input range by DCON Utility.Or please use our I-7017RC or I-7017RC modules.Q5. How to programming with I-7000 or M-7000 by C#, VB, VC?ICP DAS I-7000 and M-7000 series both support DCON protocol. And Only M-7000 series supports Modbus protocol.For DCON protocol, please download SDK and Demo from:/pub/cd/8000cd/napdos/driver/dcon_dll_new/For Modbus protocol, please refer this web link:/products/PAC/i-8000/modbus.htmIfthereisanyotherquestion,pleasefeelfreetocontactus.Email:******************Website: /contact_us/contact_us.htmlI-7017R - 8-ch Voltage and Current Input DAQ Module - QuickStart (May/2020)ICP DAS USA, Inc. | | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717。
斑马技术公司DS8108数字扫描仪产品参考指南说明书
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
CLASSIFICATIONS Weld Metal EN 758 EN 758 SFA/AWS A5.20 SFA/AWS A5.20 T 42 2 P C 1 H5 T 46 2 P M 1 H10 E71T-1C E71T-1M
CHEMICAL COMPOSITION All Weld Metal (%) C1 shielding gas Min Max C Si Mn P S Cr Ni Mo V Nb Cu 0.04 0.30 1.00 0.08 0.60 1.40 0.025 0.025 0.2 0.5 0.2 0.08 0.05 0.3 M21 shielding gas Min Max 0.04 0.40 1.10 0.08 0.70 1.50 0.025 0.025 0.2 0.5 0.2 0.08 0.05 0.3
Properties Rp0.2 (MPa) Rm (MPa) A5 (%)
Charpy V at -20°C (J) 54 Comments:
The diffusible hydrogen values are determined in accordance with the method given in ISO 3690. Welding parameters for hydrogen determination: Wire diameter 1.2mm, current 250 amps, voltage 29v, stickout 15mm, DC electrode positive ECONOMICS & CURRENT DATA
Product Data Sheet
T 'Tubular cored electrode arc welding'
Signed by Approved by Reg no
Dual Shield 7100 LH
Cancelling Reg date Page
Neil Farrow
Neil Farrow/Barbro Karlström
EN003470
EN003449
2006-07-05
1 (2)
REASON FOR ISSUE CCS approval added GENERAL A multi-purpose all positional rutile cored wire for use with C1 or M21 shielding gas. Shielding Gas: M21, C1 (EN 439) Polarity: DC+ Alloy Type: C Mn Fill Type: Rutile Diff Hydrogen: <5 ml/100g for C1, <10 ml/100g for M21 APPROVALS ABS BV CCS DNV GL LR 3SA 3YSA (M21 and C1) SA3YM SA3YMHH (M21 and C1) 3Y 40S H10 (M21 and C1) 3YMSH10 (M21 and C1) 3YHHS (M21 and C1) 3S3YS H15 (M21 and C1)
Product Data Sheet
T 'Tubular cored electrode arc welding'
Signed by Approved by Reg no
Dual Shield 7100 LH
Cancelling g date Page
Neil Farrow
Neil Farrow/Barbro Karlström
EN003470
EN003449
2006-07-05
2 (2)
MECHANICAL PROPERTIES OF WELD METAL All Weld Metal C1 shielding gas As welded Min Max 420 510 22 610 M21 shielding gas As welded Min Max 460 540 22 54 640
-
-
Dimension (mm) Ø 1.2
Current (A) Min Max 150 350
W Nom 20
η
Nom 85 Min 2.1
H Max 7.5
Feed Min Max 5.8 20.7
U Min 27 Max 38
W
η
H Feed U
= Gas consumption (l / min) = Recovery, g weld metal / 100g wire (%) = Deposit rate (kg weld metal / hour arc time) = Feeding rate (m/min) = Arc voltage (V)