六甲基二硅氮烷 MSDS

合集下载

六甲基二硅氮烷的爆炸极限 -回复

六甲基二硅氮烷的爆炸极限 -回复

六甲基二硅氮烷的爆炸极限-回复六甲基二硅氮烷(LAMDA)是一种有机硅化合物,也被称为长链二硅氮烷。

它具有一系列的应用,包括作为推进剂、高能燃料的成分以及化学工业中的催化剂。

然而,由于其潜在的危险性,了解六甲基二硅氮烷的爆炸极限对安全应用至关重要。

爆炸极限是指在特定的温度和压力条件下,气体或蒸气混合物在空气中能够产生爆炸的最小和最大浓度范围。

了解一个化合物的爆炸极限对于预防和控制爆炸事故起着重要的作用。

下面将一步一步回答关于六甲基二硅氮烷的爆炸极限的问题。

第一步:理解爆炸的基本原理在开始讨论六甲基二硅氮烷的爆炸极限之前,我们需要理解爆炸的基本原理。

爆炸是指在适当的条件下,燃料与氧气在一定的浓度下迅速氧化反应并释放出大量能量的过程。

爆炸需要同时满足可燃物(如燃料)、氧气(如空气)和点火源(如火花或高温)三个要素。

第二步:确定六甲基二硅氮烷的化学性质六甲基二硅氮烷的化学式为(CH3)3SiNHSi(CH3)3,其中包含硅、氮和氢等元素。

我们需要了解六甲基二硅氮烷的化学性质,以便更好地理解其爆炸极限。

根据相关研究,六甲基二硅氮烷是一种易燃液体,燃烧时会释放出大量能量。

第三步:查找相关数据和文献了解六甲基二硅氮烷的爆炸极限需要参考相关的数据和文献。

这些数据通常可以通过化学品安全数据表(MSDS)或科学文献进行查找。

在这里,我们以MSDS为例,获取关于六甲基二硅氮烷的爆炸极限数据。

根据一些相关的MSDS数据,我们可以得到六甲基二硅氮烷的爆炸极限数据。

这些数据表示了在一定的温度和压力下,六甲基二硅氮烷和空气中形成可燃混合物的最小和最大浓度范围。

第四步:分析六甲基二硅氮烷的爆炸极限数据根据已获得的数据,我们可以发现六甲基二硅氮烷的爆炸极限通常以体积百分比表示。

例如,六甲基二硅氮烷的下爆炸限(LEL)可能是1.3%,即在空气中,只有当六甲基二硅氮烷的体积比例大于1.3%时,才会形成可燃混合物。

类似地,六甲基二硅氮烷的上爆炸限(UEL)可能是8.5%,即当六甲基二硅氮烷的体积比例大于8.5%时,也会形成可燃混合物。

六甲基二硅烷的理化性质及危险特性

六甲基二硅烷的理化性质及危险特性
沸点(℃)
112~114
饱和蒸气压(kPa)
/
溶解性
不溶于水,溶于丙酮、苯、乙醚、庚烷。
毒性及健康危害
侵入途径
吸入、食入、经皮吸收。
毒性
LD50:
LC50:
健康危害
吸入、摄入或经皮肤吸收后对身体有害,对眼睛、皮肤、粘膜和上呼吸道有刺激作用。
急救方法
皮肤接触:立即脱去污染的衣着,用大量流动清水冲洗。就医。眼睛接触:提起眼睑,用流动清水或生理盐水冲洗。就医。吸入:迅速脱离现场至空气新鲜处。保持呼吸道通畅。如呼吸困难,给输氧。如呼吸停止,立即进行人工呼吸。就医。食入:饮足量温水,催吐。就医。
六甲基二硅烷的理化性质及危险特性
标识
中文名:六甲基二硅烷
危险货物编号:32186
英文名:hexamethyl disilane
UN编号:/
分子式:C6H18Si2
分子量:146.38
CAS号1450-14-2
理化性质
外观与性状
无色液体。
熔点(℃3
相对密度(空气=1)
1.42
燃烧爆炸危险性
燃烧性
易燃
燃烧分解物
一氧化碳、二氧化碳、氧化硅。
闪点(℃)
-1
爆炸上限(v%)
/
引燃温度(℃)
/
爆炸下限(v%)
/
建规火险分级

稳定性
稳定
聚合危害
聚合
禁忌物
强氧化剂、强酸、强碱。
危险特性
其蒸气与空气可形成爆炸性混合物,遇明火、高热极易燃烧爆炸。与氧化剂接触猛烈反应。受高热分解放出有毒的气体。若遇高热,容器内压增大,有开裂和爆炸的危险。
储运条件
与泄漏处理

六甲基二硅烷胺安全技术说明书(msds)

六甲基二硅烷胺安全技术说明书(msds)
第八部分:接触控制/个体防护
中国MAC
(mg/m3):
未制订标准
前苏联MAC
(mg/m3):
未制订标准
TLVTN:
无资料
TLVWN:
无资料
接触限值:
美国TLV-TWA:未制订标准美国TLV-STEL:未制订标准
监测方法:
无资料
工程控制:
密闭操作,全面排风。
呼吸系统防护:
可能接触其蒸气时,应该佩戴防毒面具。紧急事态抢救或撤离时,建议佩戴自给式呼吸器。
分子结构数据:
1、摩尔折射率:50.872、摩尔体积(cm3/mol):207.83、等张比容(90.2K):417.14、表面张力(dyne/cm):16.25、极化率(10-24cm3):20.16
计算化学数据:
1.疏水参数计算参考值(XlogP):无2.氢键供体数量:13.氢键受体数量:14.可旋转化学键数量:25.互变异构体数量:无6.拓扑分子极性表面积127.重原子数量:98.表面电荷:09.复杂度:76.210.同位素原子数量:011.确定原子立构中心数量:012.不确定原子立构中心数量:013.确定化学键立构中心数量:014.不确定化学键立构中心数量:015.共价键单元数量:1
六甲基二硅烷胺
六甲基二硅烷胺安全技术说明书(msds)目录
第一部分
化学品及企业标识
第九部分
理化特性
第二部分
危险性概述
第十部分
稳定性和反应活性
第三部分
成分/组成信息
第十一部分
毒理学信息
第四部分
急救措施
第十二部分
生态学信息
第五部分
消防措施
第十三部分
废弃处置
第六部分

六甲基二硅氮烷MSDS资料讲解

六甲基二硅氮烷MSDS资料讲解
六甲基二硅氮烷MSDS


中文名:六甲基二硅氮烷
英文名:Hexamethyldisilazane
分子式:(CH3)3SiNHSi(CH3)3
分子量:161.39
CAS号:999-97-3
危险性类别:第3.8类腐蚀品
化学类别:易燃液体







主要成分:纯品
主要用途:可用于特种有机合成。阿米卡星、盘尼西林、头孢霉素、氟尿嘧啶及各种青霉素衍生物等合成过程中的甲硅烷基化。
也可用于硅藻土、白炭黑、钛等粉末的表面处理,其作用机理是以硅氮键与硅羟基缩合。
在半导体工业中用作光致刻蚀剂的粘结助剂。
在有机硅氮烷化学中,可以用作与氯硅烷单体进行氯交换,从而获得聚硅氮烷。这种方法比直接通氨法在合成上有巨大优势。
外观与性状:无色液体




侵入途径:吸入、食入、经皮吸收。
健康危害:对眼和皮肤都有一定的灼烧。与眼直接接触,可致眼严重烧伤。过多吸入该气体,刺激呼吸道,可致液体在肺部沉积。能引起轻微的麻木。误服后呕吐可使咽下的六甲基二硅氮烷进入肺部。能通过皮肤被人体吸收。






迅速撤离泄漏污染区人员,并隔离,限制出入。建议应急处理人员戴自给正压式呼吸器,穿防护服。尽可能切断泄漏源。防止进入下水道、排洪沟等限制性空间。控制并回收流出的液体,使用不起火花的器具。疏散泄漏污染区人员至安全区,禁止无关人员进入污染区,切断火源。应急处理人员戴自给式呼吸器,穿化学防护服。不要直接接触泄漏物。在确保安全情况下堵漏。用不燃性分散剂制成的乳液刷洗,经稀释的洗液放入废水系统。如大量泄漏,利用围堤收容,然后收集、转移、回收或无害处理后废弃。

六甲基二硅氮烷的爆炸极限

六甲基二硅氮烷的爆炸极限

六甲基二硅氮烷的爆炸极限六甲基二硅氮烷(简称DMADN)是一种常见的含氮硅化合物,具有较高的能量密度和稳定性,广泛应用于烟火、炸药和推进剂等领域。

本文将介绍六甲基二硅氮烷的爆炸极限及其相关性质。

爆炸极限是指在一定条件下,气体或气体混合物能够发生燃烧或爆炸的最低和最高浓度范围。

它通常由下限和上限两个值表示,分别称为爆炸下限(LEL)和爆炸上限(UEL)。

爆炸下限是指气体或气体混合物中能够燃烧的最低浓度,通常以体积分数表示。

相应地,爆炸上限则是指能够燃烧的最高浓度。

对于六甲基二硅氮烷而言,其爆炸极限取决于其浓度范围以及环境条件。

根据相关研究,DMADN的爆炸下限一般较低,通常在0.15%到0.30%之间。

这意味着当DMADN的浓度高于0.15%时,就有发生燃烧或爆炸的风险。

相应地,爆炸上限则较高,通常在20%到30%之间。

当DMADN的浓度超过30%时,也有可能发生燃烧或爆炸。

爆炸极限的确定对于燃烧与安全性的考虑至关重要。

在燃烧过程中,一个可燃物质需要同时具备气体、氧气和能源三个要素,只有当可燃物质的浓度位于爆炸极限范围内,才能支持燃烧反应的发生。

超过爆炸极限范围的浓度将无法完成燃烧反应。

此外,与六甲基二硅氮烷的爆炸极限相关的还有其燃烧特性。

DMADN在燃烧过程中产生的烟雾、气体和燃烧产物将对环境和人体健康造成潜在的危害。

因此,在使用或储存DMADN时,必须加强安全措施,并严格遵循相关的操作规程和管理标准。

综上所述,六甲基二硅氮烷的爆炸极限是指其能够发生燃烧或爆炸的最低浓度和最高浓度范围。

根据相关研究,DMADN的爆炸下限通常在0.15%到0.30%之间,而爆炸上限则在20%到30%之间。

了解和掌握六甲基二硅氮烷的爆炸极限对于合理使用和安全操作具有重要意义,能够帮助减少事故风险,确保生产和实验环境的安全。

六甲基二硅烷安全技术说明书MSDS

六甲基二硅烷安全技术说明书MSDS

第一部分化学品及企业标识化学品中文名:六甲基二硅烷化学品英文名:HexamethyldisilaneCAS No.:1450-14-2EC No.:215-911-0分子式:C6H18Si2产品推荐及限制用途:用作合成三甲基硅基锂、三甲基硅基钠、三甲基硅基钾的原料。

第二部分危险性概述紧急情况概述液体。

高度易燃,其蒸气与空气混合,能形成爆炸性混合物。

GHS危险性类别根据GB30000-2013化学品分类和标签规范系列标准(参阅第十六部分),该产品分类如下:易燃液体,类别2。

标签要素象形图警示词:危险危险信息:高度易燃液体和蒸气。

预防措施:远离热源、热表面、火花、明火以及其它点火源。

禁止吸烟。

保持容器密闭。

容器和接收设备接地和等势联接。

使用不产生火花的工具。

采取措施,防止静电放电。

戴防护手套/穿防护服/戴防护眼罩/戴防护面具。

事故响应:如皮肤(或头发)沾染:立即去除/脱掉所有沾染的衣服。

用水清洗皮肤或淋浴。

安全储存:存放在通风良好的地方。

保持低温。

废弃处置:按照地方/区域/国家/国际规章处置内装物/容器。

物理化学危险:高度易燃液体,其蒸气与空气混合,能形成爆炸性混合物。

健康危害:吸入该物质可能会引起对健康有害的影响或呼吸道不适。

意外食入本品可能对个体健康有害。

通过割伤、擦伤或病变处进入血液,可能产生全身损伤的有害作用。

眼睛直接接触本品可导致暂时不适。

环境危害:请参阅SDS第十二部分。

第三部分成分/组成信息√物质混合物第四部分急救措施一般性建议:急救措施通常是需要的,请将本SDS出示给到达现场的医生。

皮肤接触:立即脱去污染的衣物。

用大量肥皂水和清水冲洗皮肤。

如有不适,就医。

眼睛接触:用大量水彻底冲洗至少15分钟。

如有不适,就医。

吸入:立即将患者移到新鲜空气处,保持呼吸畅通。

如果呼吸困难,给于吸氧。

如患者食入或吸入本物质,不得进行口对口人工呼吸。

如果呼吸停止。

立即进行心肺复苏术。

立即就医。

食入:禁止催吐,切勿给失去知觉者从嘴里喂食任何东西。

六甲基二硅氧烷msds

六甲基二硅氧烷msds




车间卫生标准:无资料
检测方法:无资料
工程控制:密闭操作,全面排风。
呼吸系统防护:空气中浓度超标时,佩戴自吸过滤式防毒面具(半面罩)。紧急事态抢救或撤离时,建议佩戴自给式呼吸器。
眼睛防护:戴化学安全防护眼镜。
身体防护:穿防毒物渗透工作服。
手防护:戴橡胶耐油手套。
其它:工作现场严禁吸烟。工作完毕,淋浴更衣。注意个人清洁卫生。




熔点(℃):−59
沸点(℃):101
相对密度(水=1):0.764
相对密度(空气=1):无资料
饱和蒸气压(Kpa):无资料
辛醇/水分配系数的对数值:无资料
燃烧热(KJ/mol):无资料
临界温度(℃):无资料
临界压力(Mpa):无资料
溶解性:不溶水,溶于多种有机溶剂。








稳定性:稳定
聚合危害:无资料
避免接触的条件:无资料
禁忌物:无资料
燃烧(分解)产物:一氧化碳、二氧化碳、氧化硅。


急性毒性:口服-大鼠LDL0: 8毫升/公斤;腹腔-小鼠LD50: 4500毫克/公斤




该物质对环境可能有危害,对水体应给予特别注意。


建议用焚烧法处置,处置前应参阅国家或地方有关法律法规。


中文名:ห้องสมุดไป่ตู้甲基二硅氧烷
英文名:Hexamethyldisiloxane
分子式:C6H18OSi2
分子量:162.38
CAS号:107-46-0
危险性类别:第3.2类中闪点液体

六甲基二硅氮烷MSDS资料讲解

六甲基二硅氮烷MSDS资料讲解
六甲 基二 硅氮 烷MSDS


中文名:六甲基一硅氮烷
英文名:Hexamethyldisilazane
分子式:~(CH3)3SiNHSi(CH3)3
分子量:161.39CAS号:999-97-3
危险性类别:第3.8类腐蚀品化学类别:易燃液体
主要组成与性状
主要成分:纯品
主要用途:可用于特种有机合成。阿米卡星、盘尼西林、头抱霉素、氟尿嘧啶及各种青霉素衍生物等合成过程中的甲硅 烷基化。
急 救 措 施
皮肤接触:立即脱去被污染的衣着,用肥皂水清洗。就医
眼睛接触:立即提起眼睑,用大量流动清水清洗,时不时左右转动眼球。至少15分钟。就医
吸入:迅速脱离现场至空气新鲜处。保持呼吸道通畅。如呼吸困难,给输氧。如呼吸停止,立即进行人工呼吸。就医。 食入:不要催吐。给饮大量水。就医。
燃 爆 特 性 与 消 防
仅供学习与交流,如有侵权请联系网站删除谢谢2
也可用于硅藻土、白炭黑、钛等粉末的表面处理,其作用机理是以硅氮键与硅羟基缩合。 在半导体工业中用作光致刻蚀剂的粘结助剂。
在有机硅氮烷化学中,可以用作与氯硅烷单体进行氯交换,从而获得聚硅氮烷。这种方法比直接通氨法在合成上有巨 大优势。
外观与吸入、食入、经皮吸收。
健康危害:对眼和皮肤都有一定的灼烧。与眼直接接触,可致眼严重烧伤。过多吸入该气体,刺激呼吸道,可致液体在肺 部沉积。能引起轻微的麻木。误服后呕吐可使咽下的六甲基二硅氮烷进入肺部。能通过皮肤被人体吸收。
储 运 注 意 事 项
1、 贮存时,不准接触明火,应保持通风、干燥,防止阳光照射,贮存温度-50C〜45C。
2、运输时,应避免碰撞,防雨淋、日晒。按危险品贮存和运输。
3、该产品易于水解,遇酸性物质易发生剧烈反应,应保存在密闭容器中。储于阴凉、通风仓内。远离热源、火源、水 气。应与水、甲醇、酸、强碱、氧化剂等分开存放。容器要接触地面以防静电。使用不带火花的工具和设备进行操作
  1. 1、下载文档前请自行甄别文档内容的完整性,平台不提供额外的编辑、内容补充、找答案等附加服务。
  2. 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
  3. 3、如文档侵犯您的权益,请联系客服反馈,我们会尽快为您处理(人工客服工作时间:9:00-18:30)。

Hexamethyldisilzane MSDSSAFETY DATA SHEET1. IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING1.1 Product identifiersProduct name : HexamethyldisilazaneProduct Number : 379212Brand : NewtopCAS-No. : 999-97-31.2 Relevant identified uses of the substance or mixture and uses advised againstIdentified uses : Manufacture of substances1.3 Details of the supplier of the safety data sheetCompany : Newtop Chemical Materials (Shanghai) Co.,Ltd.Unit A4,Building No.ANo.780,Song Pu RoadBaoshan SHANGHAICHINATelephone : +86 21-51078280Fax : +86 21-51078281E-mail address : Hunter@1.4 Emergency telephone numberEmergency Phone # : +8621-516199732. HAZARDS IDENTIFICATION2.1 Classification of the substance or mixtureClassification according to Regulation (EC) No 1272/2008 [EU-GHS/CLP]Flammable liquids (Category 2)Acute toxicity, Oral (Category 4)Acute toxicity, Inhalation (Category 4)Acute toxicity, Dermal (Category 3)Skin corrosion (Category 1B)Chronic aquatic toxicity (Category 3)Classification according to EU Directives 67/548/EEC or 1999/45/ECHighly flammable.Harmful by inhalation, in contact with skin and if swallowed.Causes burns.Harmful to aquatic organisms, may cause long-term adverse effects in the aquatic environment.2.2 Label elementsLabelling according Regulation (EC) No 1272/2008 [CLP]PictogramSignal word DangerHazard statement(s)H225 Highly flammable liquid and vapour.H302 + H332 Harmful if swallowed or if inhaledH311 Toxic in contact with skin.H314 Causes severe skin burns and eye damage.H412 Harmful to aquatic life with long lasting effects.Precautionary statement(s)P210 Keep away from heat/sparks/open flames/hot surfaces. - No smoking.P273 Avoid release to the environment.P280 Wear protective gloves/ protective clothing/ eye protection/ faceprotection.P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Removecontact lenses, if present and easy to do. Continue rinsing.P310 Immediately call a POISON CENTER or doctor/ physician.noneSupplemental HazardStatementsAccording to European Directive 67/548/EEC as amended.Hazard symbol(s)R-phrase(s)R11 Highly flammable.R20/21/22 Harmful by inhalation, in contact with skin and if swallowed.R34 Causes burns.R52/53 Harmful to aquatic organisms, may cause long-term adverse effects inthe aquatic environment.S-phrase(s)S16 Keep away from sources of ignition - No smoking.S26 In case of contact with eyes, rinse immediately with plenty of water andseek medical advice.S36/37/39 Wear suitable protective clothing, gloves and eye/face protection.S45 In case of accident or if you feel unwell, seek medical advice immediately(show the label where possible).S61 Avoid release to the environment. Refer to special instructions/ Safetydata sheets.2.3 Other hazards -none3. COMPOSITION/INFORMATION ON INGREDIENTS3.1 SubstancesSynonyms : HMDS1,1,1,3,3,3-HexamethyldisilazaneFormula : C6H19NSi2Molecular Weight : 161,39 g/mol4. FIRST AID MEASURES4.1 Description of first aid measuresGeneral adviceConsult a physician. Show this safety data sheet to the doctor in attendance.If inhaledIf breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.In case of skin contactTake off contaminated clothing and shoes immediately. Wash off with soap and plenty of water. Takevictim immediately to hospital. Consult a physician.In case of eye contactRinse thoroughly with plenty of water for at least 15 minutes and consult a physician.If swallowedDo NOT induce vomiting. Never give anything by mouth to an unconscious person. Rinse mouth withwater. Consult a physician.4.2 Most important symptoms and effects, both acute and delayedMaterial is extremely destructive to tissue of the mucous membranes and upper respiratory tract, eyes, and skin., spasm, inflammation and edema of the larynx, spasm, inflammation and edema of the bronchi,pneumonitis, pulmonary edema, burning sensation, Cough, wheezing, laryngitis, Shortness of breath,Headache, Nausea, Vomiting4.3 Indication of any immediate medical attention and special treatment neededno data available5. FIREFIGHTING MEASURES5.1 Extinguishing mediaSuitable extinguishing mediaUse water spray, alcohol-resistant foam, dry chemical or carbon dioxide.5.2 Special hazards arising from the substance or mixtureCarbon oxides, nitrogen oxides (NOx), silicon oxides5.3 Advice for firefightersWear self contained breathing apparatus for fire fighting if necessary.5.4 Further informationUse water spray to cool unopened containers.6. ACCIDENTAL RELEASE MEASURES6.1 Personal precautions, protective equipment and emergency proceduresWear respiratory protection. Avoid breathing vapors, mist or gas. Ensure adequate ventilation. Remove all sources of ignition. Evacuate personnel to safe areas. Beware of vapours accumulating to formexplosive concentrations. Vapours can accumulate in low areas.6.2 Environmental precautionsPrevent further leakage or spillage if safe to do so. Do not let product enter drains. Discharge into theenvironment must be avoided.6.3 Methods and materials for containment and cleaning upContain spillage, and then collect with an electrically protected vacuum cleaner or by wet-brushing and place in container for disposal according to local regulations (see section 13).6.4 Reference to other sectionsFor disposal see section 13.7. HANDLING AND STORAGE7.1 Precautions for safe handlingAvoid contact with skin and eyes. Avoid inhalation of vapour or mist.Keep away from sources of ignition - No smoking.Take measures to prevent the build up of electrostatic charge.7.2 Conditions for safe storage, including any incompatibilitiesHandle under nitrogen, protect from moisture. Store under nitrogen. Store in cool place. Keep container tightly closed in a dry and well-ventilated place. Containers which are opened must be carefully resealed and kept upright to prevent leakage.Hydrolyses readily.7.3 Specific end usesno data available8. EXPOSURE CONTROLS/PERSONAL PROTECTION8.1 Control parametersComponents with workplace control parameters8.2 Exposure controlsAppropriate engineering controlsAvoid contact with skin, eyes and clothing. Wash hands before breaks and immediately after handling the product.Personal protective equipmentEye/face protectionTightly fitting safety goggles. Faceshield (8-inch minimum). Use equipment for eye protectiontested and approved under appropriate government standards such as NIOSH (US) or EN166(EU).Skin protectionHandle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique(without touching glove's outer surface) to avoid skin contact with this product. Dispose ofcontaminated gloves after use in accordance with applicable laws and good laboratory practices.Wash and dry hands.The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC andthe standard EN 374 derived from it.Immersion protectionMaterial: Nitrile rubberMinimum layer thickness: 0,4 mmBreak through time: > 480 minMaterial tested:Camatril® (Aldrich Z677442, Size M)Splash protectionMaterial: Nitrile rubberMinimum layer thickness: 0,11 mmBreak through time: > 30 minMaterial tested:Dermatril® (Aldrich Z677272, Size M)data source: KCL GmbH, D-36124 Eichenzell, phone +49 (0)6659 873000, e-mail sales@kcl.de,test method: EN374If used in solution, or mixed with other substances, and under conditions which differ from EN 374,contact the supplier of the CE approved gloves. This recommendation is advisory only and mustbe evaluated by an Industrial Hygienist familiar with the specific situation of anticipated use by ourcustomers. It should not be construed as offering an approval for any specific use scenario.Body ProtectionComplete suit protecting against chemicals, Flame retardant antistatic protective clothing, The typeof protective equipment must be selected according to the concentration and amount of thedangerous substance at the specific workplace.Respiratory protectionWhere risk assessment shows air-purifying respirators are appropriate use a full-face respiratorwith multi-purpose combination (US) or type ABEK (EN 14387) respirator cartridges as a backupto engineering controls. If the respirator is the sole means of protection, use a full-face supplied airrespirator. Use respirators and components tested and approved under appropriate governmentstandards such as NIOSH (US) or CEN (EU).9. PHYSICAL AND CHEMICAL PROPERTIES9.1 Information on basic physical and chemical propertiesa) Appearance Form: liquid, clearColour: colourlessb) Odour no data availablec) Odour Threshold no data availabled) pH > 7,0e) Melting point/freezingpointMelting point/range: -80 °Cf) Initial boiling point andboiling range125 °Cg) Flash point 11 °C - closed cuph) Evaporation rate no data availablei) Flammability (solid, gas) no data availablej) Upper/lowerflammability orexplosive limits Upper explosion limit: 16,3 %(V) Lower explosion limit: 0,8 %(V)k) Vapour pressure 20,0 hPa at 20,0 °Cl) Vapour density no data availablem) Relative density 0,774 g/mL at 25 °Cn) Water solubility insolubleo) Partition coefficient: n-octanol/waterlog Pow: 2,62p) Autoignitiontemperature380,0 °Cq) Decompositiontemperatureno data availabler) Viscosity no data availables) Explosive properties no data availablet) Oxidizing properties no data available9.2 Other safety informationno data available10. STABILITY AND REACTIVITY10.1 Reactivityno data available10.2Chemical stabilityno data available10.3 Possibility of hazardous reactionsno data available10.4 Conditions to avoidAmmonia is formed upon contact with water or humid air.Heat, flames and sparks. Extremes of temperature and direct sunlight.10.5 Incompatible materialsStrong oxidizing agents, Strong acids10.6 Hazardous decomposition productsOther decomposition products - no data available11. TOXICOLOGICAL INFORMATION11.1Information on toxicological effectsAcute toxicityLD50Oral - rat - 850,0 mg/kgLC50Inhalation - rat - 6 h - 10 mg/lLC50Inhalation - rat - 6 h - 1516 ppmLD50Dermal - rabbit - 549,5 mg/kgRemarks: Behavioral:Somnolence (general depressed activity). Lungs, Thorax, or Respiration:Otherchanges. Gastrointestinal:Other changes.Skin corrosion/irritationSkin - rabbit - Severe skin irritation - Draize TestSerious eye damage/eye irritationno data availableRespiratory or skin sensitizationno data availableGerm cell mutagenicityno data availableCarcinogenicityIARC: No component of this product present at levels greater than or equal to 0.1% is identified as probable, possible or confirmed human carcinogen by IARC.Reproductive toxicityno data availableSpecific target organ toxicity - single exposureno data availableSpecific target organ toxicity - repeated exposureno data availableAspiration hazardno data availablePotential health effectsInhalation Toxic if inhaled. Material is extremely destructive to the tissue of themucous membranes and upper respiratory tract.Ingestion Harmful if swallowed. Causes burns.Skin Toxic if absorbed through skin. Causes skin burns.Eyes Causes eye burns.Signs and Symptoms of ExposureMaterial is extremely destructive to tissue of the mucous membranes and upper respiratory tract, eyes, and skin., spasm, inflammation and edema of the larynx, spasm, inflammation and edema of the bronchi,pneumonitis, pulmonary edema, burning sensation, Cough, wheezing, laryngitis, Shortness of breath,Headache, Nausea, VomitingAdditional InformationRTECS: JM923000012. ECOLOGICAL INFORMATION12.1ToxicityToxicity to fish LC50 - Danio rerio (zebra fish) - 88 mg/l - 96,0 hToxicity to daphnia andEC50 - Daphnia magna (Water flea) - 80,00 mg/l - 48 hother aquaticinvertebratesToxicity to algae EC50 - Desmodesmus subspicatus (green algae) - 19,00 mg/l - 72 h12.2Persistence and degradabilityBiodegradability Result: 15,3 % - Not readily biodegradable.Method: OECD Test Guideline 301Remarks: no data available12.3Bioaccumulative potentialno data available12.4 Mobility in soilno data available12.5Results of PBT and vPvB assessmentno data available12.6Other adverse effectsHarmful to aquatic life with long lasting effects.no data available13. DISPOSAL CONSIDERATIONS13.1 Waste treatment methodsProductBurn in a chemical incinerator equipped with an afterburner and scrubber but exert extra care in igniting as this material is highly flammable. Offer surplus and non-recyclable solutions to a licensed disposal company.Contaminated packagingDispose of as unused product.14. TRANSPORT INFORMATION14.1 UN numberADR/RID: 3286IMDG: 3286 IATA: 328614.2 UN proper shipping nameADR/RID: FLAMMABLE LIQUID, TOXIC, CORROSIVE, N.O.S. (1,1,1,3,3,3-Hexamethyldisilazane) IMDG: FLAMMABLE LIQUID, TOXIC, CORROSIVE, N.O.S. (1,1,1,3,3,3-Hexamethyldisilazane) IATA: Flammable liquid, toxic, corrosive, n.o.s. (1,1,1,3,3,3-Hexamethyldisilazane)Special Provisions: “Keep away from heat” label required.14.3 Transport hazard class(es)ADR/RID: 3 (6.1, 8)IMDG: 3 (6.1, 8) IATA: 3 (6.1, 8)14.4 Packaging groupADR/RID: II IMDG: II IATA: II14.5 Environmental hazardsADR/RID: no IMDG Marine pollutant: no IATA: no14.6 Special precautions for userno data available15. REGULATORY INFORMATIONThis safety datasheet complies with the requirements of Regulation (EC) No. 1907/2006.15.1 Safety, health and environmental regulations/legislation specific for the substance or mixtureno data available15.2Chemical Safety Assessmentno data available16. OTHER INFORMATIONFurther informationNewtop License granted to make unlimited paper copies for internal useonly.The above information is believed to be correct but does not purport to be all inclusive and shall beused only as a guide. The information in this document is based on the present state of our knowledge and is applicable to the product with regard to appropriate safety precautions. It does not represent any guarantee of the properties of the product. Newtop and its Affiliates shall not be heldliable for any damage resulting from handling or from contact with the above product. See www.newtopchem .com and/or the reverse side of invoice or packing slip for additional terms and conditions of sale.。

相关文档
最新文档