Terminals TU 规格书

合集下载

电源板规格书-(1)

2018.12.05Prepared date / 拟制日期：A0 Reversion NO. / 版本：Specification NO. / 承认书编号：Product NO.(P/N:) / 产品编号： GrayWhiteBlackProduct color / 产品颜色: 5V1.5A/+15V0.2A/-15V0.2A Product specification / 产品规格：Product model / 产品型号：电源板Customer P.N. / 客户料号：Product type / 产品类型： Customer code / 客户代码：PROVIDER SIGNATURE 制造商签核PREPARED BY 拟制CHECKED BY 审核APPROVED BY 批准Company Chop 公司签章CUSTOMER APPROVED SIGNATURE 客户承认签核TEST BY 测试CHECKED BY 审核APPROVED BY 批准Company Chop 公司签章Please return to us one copy of “SPECIFICATION FOR APPROVAL” with you approved signature. 尊敬的客户，请您确认后，签字盖章回传一份承认书给我司.产品类型Model 产品型号Specification 产品规格P/N 产品编号环保要求电源板5V1.5A/±15V0.2AROHS产品承认书SPECIFICATION FOR APPROVALE. C. LIST/变更履历表** Table of Contents/目录 **1. Description /概述 (4)2. Input Characteristics/输入特性 (4)3. Output Characteristics/输出特性 (4)3.1. Basic Characteristics/基本特性 (4)3.2 .Electric Interface /电气接口 (5)4. Protection Requirements/保护要求 (5)4.1. Short Circuit Protection/短路保护 (5)4.2. Over Current Protection/过流保护 (5)5. Environment Requirements/环境要求 (5)5.1. Operating Temperature and Relative Humidity/工作温度和湿度要求 (5)5.2. Storage Temperature and Relative Humidity/储存温度和湿度要求 (5)5.3. Height Above Sea Level/ 海拔高度 (5)6. Reliability Requirements/可靠性要求 (5)6.1. Burn-in/老化 (5)7. Safety Standards/安全标准 (5)7.1. Dielectric Strength(Hi-pot)/介电耐压强度(高压) (5)7.2. Leakage Current/漏电流 (5)7.3. Insulation Resistance/绝缘阻抗 (5)8. Mechanical Requirement/结构参数 (6)8.1. Mechanical Draw/结构图 (6)9. Packing/包装 (6)10. Statement/声明 (6)1.Description /概述The document detail the electrical specification, mechanical specification and environmentalspecification of a SMPS,the power supply provide 5V1.5A/+15V0.2A/-15V0.2A continuous outputpower.本规格书详细描述了一款5V1.5A/±15V0.2A (连续输出功率)开关电源的电气特性,结构特性及环境等要求。

聚合物锂离子电池产品规格书说明书

Product Specification for Li-ion Polymer Battery 聚合物锂离子电池产品规格书Model电芯型号: 702427(PCM)惠州基安比新能源有限公司HUIZHOU MARKYN NEW ENERGY CO.,LTD.电话: ************传真: ************TEL: ************ FAX : ************SPECIFICATION AMENDMENT RECORDS规格书变更记录1. Scope适用范围：This document describes the Product Specification of the Li-Polymer Rechargeable Battery supplied by Huizhou Markyn New Energy Co., LTD.本规格书描述了惠州基安比新能源有限公司的可充电锂离子聚合物电池的产品性能指标。

2. Description 说明2.1 Description: Li-Polymer Battery类型：锂离子聚合物电池2.2 Model: 702427型号：7024273. Specification产品规格4. Battery Cell Performance Criteria 电芯性能标准4.1 Standard testing environment标准测试环境Unless specifically stated otherwise, tests must be done within one month of delivery and the number of charging-recharging cycles is fewer than 5. The following is test conditions:Test conditions:Ambient Temperature：23ºC ± 2ºCAmbient Humidity：65±20%RH除非另有说明，测试应在电池出货的1个月内进行，且充放电循环的次数少于5次。

海立压缩机规格书-WHP05600AEKQA7JT6B

目录一、WHP05600AEKQA7JT6B规格书 —————1～41.应用范围2.压缩机规格3.电机参数4.零件及图纸清单5.一般特性二、热泵热水器专用压缩机使用基准 ———5～15三、验收 ———————161.验收依据2.验收规则四、图纸 ———————17～29五、规格书修改经历 ————30SUBJECTModel WHP05600AEKQA7JT6B SPECIFICATIONWHP05600AEKQA7JT6B规格书PAGE:1/301. SCOPE 应用范围This specification is applied to SHANGHAI HIGHLY Heat pump water heater compressor.此规格适用于上海海立电器有限公司生产的热泵热水器专用压缩机。

2. SPECIFICATION OF COMPRESSOR 压缩机规格2.1 Model型号 WHP05600AEKQA7JT6B2.2 Power source input to HIGHLY inverter变频器外加电源（SHEC试验专用控制器）Rated Voltage/Frequency/Phase 220V/50Hz/single额定电压/频率/相数 220V/50Hz/单相2.3Application Heatpumpwaterheater应用热泵热水器2.4 Refrigerant制冷剂R410A2.5 Compressor Cooling Forced air压缩机冷却强制空冷2.6 Displacement排气量14.1ml/rev2.7 Performance性能参数Performance性能参数Item 项目 Standard Condition标准工况Summer Condition夏季工况Winter Condition冬季工况Rated Condition额定工况Rotational speed转速3400 min-12900 min-14700 min-13600 min-1 Nominal Heating Capacity名义制热量5640 5368 6095 5620 Motor input电机输入功率1340 1118 1795 1380 Current电流4.70 4.605.50 4.70 COP(see*)能效比(见*)4.21 4.80 3.40 4.07Test Conditions测试条件Evaporating temp.蒸发温度10℃ 15℃ 0℃ 7.2℃ Condensing temp.冷凝温度55℃ 55℃ 55℃ 54.4℃ Liquid temp. enteringexpansion valve.膨胀阀前液体温度46.7℃ 46.7℃ 46.7℃ 46.1℃Return gas temp.回气温度20℃ 25℃ 10℃ 35℃Ambient temp.周围温度35℃ 35℃ 15℃ 35℃ Wind speed风速2m/s 2m/s 2m/s 2m/sSUBJECTModel WHP05600AEKQA7JT6B SPECIFICATIONPAGE:2/30WHP05600AEKQA7JT6B规格书Heating capacity 名义制热量 (W)* COP=Motor input 电机输入功率 (W)2.8 Allowable frequency range转速范围 1000~7200rpm2.9 Allowable amount ofrefrigerant charge制冷剂充注允许量 1250g2.10 Amount of oil charge 480±20 ml(Initial)油充注允许量 480±20ml(最初)orequivalent Oil HAF68D1/HAF68D1U/ALPHA68HES2.11油 HAF68D1/HAF68D1U/ALPHA68HES或者SHEC指定同类冷冻机油2.12 Space volume of inner case壳体内容积 1200mlweightincl.oil9.4kg2.13Net净重9.4kg 包括油2.14 Hermetic Terminal 1/4”quick connect type密封接线柱1/4” 快速连接型2.15 MotormotorbrushlesscurrentTypeDirectEClassInsulationclass℃Winding resistance 1.532Ω(at 20)电机形式直流无刷电机绝缘等级E级℃线电阻 1.532Ω(at 20)* Nominal heating capacity equals refrigerant capacity adding motor input. Refrigerant capacity and motor input are measuredby secondary Refrigerant calorimeter Methods of GB5773by Shanghai Highly Electrical Appliances Co.,Ltd. Allowable heating capacity should be more than 95% of the nominal heating capacity and allowable motor input should be less than107% of nominal motor input.名义制热量等于制冷量和电机输入功率之和。

威世二极管规格书

SMBJ5.0 thru SMBJ188CAVishay General SemiconductorDocument Number: 88392For technical questions within your region, please contact one of the following:Surface Mount T RANS Z ORB ® Transient Voltage SuppressorsFEATURES•Low profile package•Ideal for automated placement •Glass passivated chip junction••cycle): 0.01 %•Excellent clamping capability •Very fast response time•Low incremental surge resistance•Meets MSL level 1, per J-STD-020, LF maximum peak of 260 °C•Solder dip 260 °C, 40 s •Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC TYPICAL APPLICATIONSUse in sensitive electronics protection against voltage transients induced by inductive load switching and lighting on ICs, MOSFET, signal lines of sensor units for consumer, computer, industrial, automotive and telecommunication.MECHANICAL DATA Case: DO-214AA (SMBJ)Molding compound meets UL 94 V-0 flammabilityratingBase P/N-E3 - RoHS compliant, commercial grade Base P/NHE3 - RoHS compliant, high reliability/automotive grade (AEC Q101 qualified)Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD22-B102E3 suffix meets JESD 201 class 1A whisker test, HE3suffix meets JESD 201 class 2 whisker testPolarity: For uni-directional types the band denotes cathode end, no marking on bi-directional typesDEVICES FOR BI-DIRECTION APPLICATIONS For bi-directional devices use C or CA suffix (e.g. SMBJ10CA).Electrical characteristics apply in both directions.PRIMARY CHARACTERISTICSV WM 5.0 V to 188 VP PPM600 W I FSM (uni-directional only)100 A T J max.150 °CDO-214AA (SMB J-Bend)Notes:(1) Non-repetitive current pulse, per Fig. 3 and derated above T A = 25 °C per Fig. 2(2) Mounted on 0.2 x 0.2" (5.0 x 5.0 mm) copper pads to each terminalMAXIMUM RATINGS (T A = 25°C unless otherwise noted)PARAMETERSYMBOL VALUE UNIT Peak pulse power dissipation with a 10/1000 µs waveform (1)(2) (Fig. 1) P PPM 600 W Peak pulse current with a 10/1000 µs waveform (1)I PPM See next table A Peak forward surge current 8.3 ms single half sine-wave uni-directional only (2) I FSM 100 AOperating junction and storage temperature range T J , T STG- 55 to + 150°CSMBJ5.0 thru SMBJ188CAVishay General Semiconductor For technical questions within your region, please contact one of the following:Document Number: 88392ELECTRICAL CHARACTERISTICS (T A = 25°C unless otherwise noted)DEVICE TYPE MODIFIED“J” BEND LEADDEVICE MARKINGCODE BREAKDOWN VOLTAGE V BR AT I T (1)(V) TEST CURRENTI T (mA) STAND-OFF VOLTAGE V WM (V)MAXIMUM REVERSE LEAKAGE AT V WM I D (µA) (3)MAXIMUM PEAK PULSE SURGE CURRENT I PPM (A)(2)MAXIMUM CLAMPING VOLTAGE AT I PPMV C (V)UNIBIMIN.MAX.(+)SMBJ5.0 KD KD 6.40 7.82 10 5.0 800 62.5 9.6(+)SMBJ5.0A (5)KE KE 6.40 7.07 10 5.0 800 65.2 9.2(+)SMBJ6.0 KF KF 6.67 8.15 10 6.0 800 52.6 11.4 (+)SMBJ6.0A KG KG 6.67 7.37 10 6.0 800 58.3 10.3 (+)SMBJ6.5 KH AH 7.22 8.82 10 6.5 500 48.8 12.3 (+)SMBJ6.5A KK AK 7.22 7.98 10 6.5 500 53.6 11.2 (+)SMBJ7.0 KL KL 7.78 9.51 10 7.0 200 45.1 13.3 (+)SMBJ7.0A KM KM 7.78 8.60 10 7.0 200 50.0 12.0 (+)SMBJ7.5 KN AN 8.33 10.2 1.0 7.5 100 42.0 14.3 (+)SMBJ7.5A KP AP 8.33 9.21 1.0 7.5 100 46.5 12.9 (+)SMBJ8.0 KQ AQ 8.89 10.9 1.0 8.0 50 40.0 15.0 (+)SMBJ8.0A KR AR 8.89 9.83 1.0 8.0 50 44.1 13.6 (+)SMBJ8.5 KS AS 9.44 11.5 1.0 8.5 20 37.7 15.9 (+)SMBJ8.5A KT AT 9.44 10.4 1.0 8.5 20 41.7 14.4 (+)SMBJ9.0 KU AU 10.0 12.2 1.0 9.0 10 35.5 16.9 (+)SMBJ9.0A KV AV 10.0 11.1 1.0 9.0 10 39.0 15.4 (+)SMBJ10 KW AW 11.1 13.6 1.0 10 5.0 31.9 18.8 (+)SMBJ10A KX AX 11.1 12.3 1.0 10 5.0 35.3 17.0 (+)SMBJ11 KY KY 12.2 14.9 1.0 11 5.0 29.9 20.1 (+)SMBJ11A KZ KZ 12.2 13.5 1.0 11 5.0 33.0 18.2 (+)SMBJ12 LD BD 13.3 16.3 1.0 12 5.0 27.3 22.0 (+)SMBJ12A LE BE 13.3 14.7 1.0 12 5.0 30.2 19.9 (+)SMBJ13 LF LF 14.4 17.6 1.0 13 1.0 25.2 23.8 (+)SMBJ13A LG LG 14.4 15.9 1.0 13 1.0 27.9 21.5 (+)SMBJ14 LH BH 15.6 19.1 1.0 14 1.0 23.3 25.8 (+)SMBJ14A LK BK 15.6 17.2 1.0 14 1.0 25.9 23.2 (+)SMBJ15 LL BL 16.7 20.4 1.0 15 1.0 22.3 26.9 (+)SMBJ15A LM BM 16.7 18.5 1.0 15 1.0 24.6 24.4 (+)SMBJ16 LN LN 17.8 21.8 1.0 16 1.0 20.8 28.8 (+)SMBJ16A LP LM 17.8 19.7 1.0 16 1.0 23.1 26.0 (+)SMBJ17 LQ LQ 18.9 23.1 1.0 17 1.0 19.7 30.5 (+)SMBJ17A LR LR 18.9 20.9 1.0 17 1.0 21.7 27.6 (+)SMBJ18 LS BS 20.0 24.4 1.0 18 1.0 18.6 32.2 (+)SMBJ18A LT BT 20.0 22.1 1.0 18 1.0 20.5 29.2 (+)SMBJ20 LU LU 22.2 27.1 1.0 20 1.0 16.8 35.8 (+)SMBJ20A LV LV 22.2 24.5 1.0 20 1.0 18.5 32.4 (+)SMBJ22 LW BW 24.4 29.8 1.0 22 1.0 15.2 39.4 (+)SMBJ22A LX BX 24.4 26.9 1.0 22 1.0 16.9 35.5 (+)SMBJ24 L Y BY 26.7 32.6 1.0 24 1.0 14.0 43.0 (+)SMBJ24A LZ BZ 26.7 29.5 1.0 24 1.0 15.4 38.9 (+)SMBJ26 MD CD 28.9 35.3 1.0 26 1.0 12.9 46.6 (+)SMBJ26A ME CE 28.9 31.9 1.0 26 1.0 14.3 42.1 (+)SMBJ28 MF MF 31.1 38.0 1.0 28 1.0 12.0 50.0 (+)SMBJ28A MG MG 31.1 34.4 1.0 28 1.0 13.2 45.4 (+)SMBJ30 MH CH 33.3 40.7 1.0 30 1.0 11.2 53.5 (+)SMBJ30A MK CK 33.3 36.8 1.0 30 1.0 12.4 48.4 (+)SMBJ33 ML CL 36.7 44.9 1.0 33 1.0 10.2 59.0 (+)SMBJ33A MM CM 36.7 40.6 1.0 33 1.0 11.3 53.3 (+)SMBJ36 MN CN 40.0 48.9 1.0 36 1.0 9.3 64.3 (+)SMBJ36A MP CP 40.0 44.2 1.0 36 1.0 10.3 58.1 (+)SMBJ40 MQ CQ 44.4 54.3 1.0 40 1.0 8.4 71.4 (+)SMBJ40A MR CR 44.4 49.1 1.0 40 1.0 9.3 64.5SMBJ5.0 thru SMBJ188CAVishay General SemiconductorDocument Number: 88392For technical questions within your region, please contact one of the following:Notes:(1)Pulse test: tp ≤ 50 ms(2)Surge current waveform per Fig. 3 and derate per Fig. 2(3)For bi-directional types having V WM of 10 V and less, the I D limit is doubled (4)All terms and symbols are consistent with ANSI/IEEE C62.35(5)For the bi-directional SMBG/SMBJ5.0CA, the maximum V BR is 7.25 V (6)V F = 3.5 V at I F = 50 A (uni-directional only)(+)Underwriters laboratory recognition for the classification of protectors (QVGQ2) under the UL standard for safety 497B and file number E136766 for both uni-directional and bi-directional devices(+)SMBJ43 MS CS 47.8 58.4 1.0 43 1.0 7.8 76.7(+)SMBJ43A MT CT 47.8 52.8 1.043 1.0 8.6 69.4(+)SMBJ45 MU MU 50.0 61.1 1.0 45 1.0 7.5 80.3 (+)SMBJ45A MV MV 50.0 55.3 1.0 45 1.0 8.3 72.7 (+)SMBJ48 MW MW 53.3 65.1 1.0 48 1.0 7.0 85.5 (+)SMBJ48A MX MX 53.3 58.9 1.0 48 1.0 7.8 77.4 (+)SMBJ51 MY MY 56.7 69.3 1.0 51 1.0 6.6 91.1 (+)SMBJ51A MZ MZ 56.7 62.7 1.0 51 1.0 7.3 82.4 (+)SMBJ54 ND ND 60.0 73.3 1.0 54 1.0 6.2 96.3 (+)SMBJ54A NE NE 60.0 66.3 1.0 54 1.0 6.9 87.1 (+)SMBJ58 NF NF 64.4 78.7 1.0 58 1.0 5.8 103 (+)SMBJ58A NG NG 64.4 71.2 1.0 58 1.0 6.4 93.6 (+)SMBJ60 NH NH 66.7 81.5 1.0 60 1.0 5.6 107 (+)SMBJ60A NK NK 66.7 73.7 1.0 60 1.0 6.2 96.8 (+)SMBJ64 NL NL 71.1 86.9 1.0 64 1.0 5.3 114 (+)SMBJ64A NM NM 71.1 78.6 1.0 64 1.0 5.8 103 (+)SMBJ70 NN NN 77.8 95.1 1.0 70 1.0 4.8 125 (+)SMBJ70A NP NP 77.8 86.0 1.0 70 1.0 5.3 113 (+)SMBJ75 NQ NQ 83.3 102 1.0 75 1.0 4.5 134 (+)SMBJ75A NR NR 83.3 92.1 1.0 75 1.0 5.0 121 (+)SMBJ78 NS NS 86.7 106 1.0 78 1.0 4.3 139 (+)SMBJ78A NT NT 86.7 95.8 1.0 78 1.0 4.8 126 (+)SMBJ85 NU NU 94.4 115 1.0 85 1.0 4.0 151 (+)SMBJ85A NV NV 94.4 104 1.0 85 1.0 4.4 137 (+)SMBJ90 NW NW 100 122 1.0 90 1.0 3.8 160 (+)SMBJ90A NX NX 100 111 1.0 90 1.0 4.1 146 (+)SMBJ100 NY NY 111 136 1.0 100 1.0 3.4 179 (+)SMBJ100A NZ NZ 111 123 1.0 100 1.0 3.7 162 (+)SMBJ110 PD PD 122 149 1.0 110 1.0 3.1 196 (+)SMBJ110A PE PE 122 135 1.0 110 1.0 3.4 177 (+)SMBJ120 PF PF 133 163 1.0 120 1.0 2.8 214 (+)SMBJ120A PG PG 133 147 1.0 120 1.0 3.1 193 (+)SMBJ130 PH PH 144 176 1.0 130 1.0 2.6 231 (+)SMBJ130A PK PK 144 159 1.0 130 1.0 2.9 209 (+)SMBJ150 PL PL 167 204 1.0 150 1.0 2.2 268 (+)SMBJ150A PM PM 167 185 1.0 150 1.0 2.5 243 (+)SMBJ160 PN PN 178 218 1.0 160 1.0 2.1 287 (+)SMBJ160A PP PP 178 197 1.0 160 1.0 2.3 259 (+)SMBJ170 PQ PQ 189 231 1.0 170 1.0 2.0 304 (+)SMBJ170A PR PR 189 209 1.0 170 1.0 2.2 275 SMBJ188 PT PT 209 255 1.0 188 1.0 1.7 344 SMBJ188A PS PS 209 231 1.0 188 1.0 2.0 328ELECTRICAL CHARACTERISTICS (T A = 25°C unless otherwise noted)DEVICE TYPE MODIFIED“J” BEND LEADDEVICE MARKINGCODE BREAKDOWN VOLTAGE V BR AT I T (1)(V) TEST CURRENTI T (mA) STAND-OFF VOLTAGE V WM (V)MAXIMUM REVERSE LEAKAGE AT V WM I D (µA) (3)MAXIMUM PEAK PULSE SURGE CURRENT I PPM (A) (2)MAXIMUM CLAMPING VOLTAGE AT I PPMV C (V)UNIBIMIN.MAX.SMBJ5.0 thru SMBJ188CAVishay General Semiconductor For technical questions within your region, please contact one of the following:Document Number: 88392Note:(1) Mounted on minimum recommended pad layoutNote:(1) Automotive grade AEC Q101 qualifiedRATINGS AND CHARACTERISTICS CURVES (T A = 25 °C unless otherwise noted)THERMAL CHARACTERISTICS (T A = 25°C unless otherwise noted)PARAMETERSYMBOL VALUEUNITTypical thermal resistance, junction to ambient (1)R θJA 100 °C/WTypical thermal resistance, junction to lead R θJL20 °C/WORDERING INFORMATION (Example)PREFERRED P/N UNIT WEIGHT (g)PREFERRED PACKAGE CODEBASE QUANTITYDELIVERY MODESMBJ5.0A-E3/520.096527507" diameter plastic tape and reel SMBJ5.0A-E3/5B 0.0965B 320013" diameter plastic tape and reel SMBJ5.0AHE3/52 (1)0.096527507" diameter plastic tape and reel SMBJ5.0AHE3/5B (1)0.0965B320013" diameter plastic tape and reelFigure 1. Peak Pulse Power Rating Curve Figure 2. Pulse Power or Current vs. Initial Junction TemperatureFigure 3. Pulse WaveformFigure 4. Typical Junction CapacitanceSMBJ5.0 thru SMBJ188CAVishay General SemiconductorDocument Number: 88392For technical questions within your region, please contact one of the following:PACKAGE OUTLINE DIMENSIONS in inches (millimeters)Figure 5. Typical Transient Thermal ImpedanceFigure6. Maximum Non-Repetitive Peak Forward Surge CurrentDisclaimer Legal Disclaimer NoticeVishayALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROV E RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product.Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability.Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify V ishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein.Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.Document Number: 91000 。

T6贴片二极管规格书(常州星海)

uA nA pF ns
R
LING JIE
STAR SEA ELECTRONICS CO.,LTD.
【领先的片式无源器件整合供应商 — 南京南山半导体有限公司】

RATINGS AND CHARACTERISTIC CURVES BAV16W/1N4148W
IF,INSTANTANEOUS FORWARD CURRENT(mA)
VF INSTANTANEOUS FORWARD VOLTAGE.(V)
VR REVERSE VOLTAGE.(V)
R
LING JIE
STAR SEA ELECTRONICS CO.,LTD.
【领先的片式无源器件整合供应商—南京南山半导体有限公司】

|样品申请单模板
第 2 页共 2 页
FIG. 1- FORWARD CHARACTERISTICS
1000 10,000
FIG. 2-LEAKAGE CURRENT VS JUNCTION TEMPERATURE
100
IR, LEAKAGE CURRENT(nA)
0 1 10
1000
10
100
1.0
10
0.1
0.01
1 0 100 200
3.86(0.152) 3.56(0.145)
2.84(0.112) 2.54(0.100)
3.9(0.154) 3.7(0.146)
2.7(0.106) 2.6(0.102)
MECHANICAL DATA
.71(0.028) .50(0.020) .15(.006) MAX 1.35(.053) .94(.037) .135(.005) .127(.004) 0.6(.023) 0.5(.020) 1.15(.045) 1.05(.041)

接线端子冷压端头接线端子标准接线端子规格 (13)

网站首页 / 产品目录 / 铜管端子 / 日成窥口接线端头 CSC日成窥口接线端头 CSC日成窥口接线端头 CSC接线端子冷压端子铜管端子型号Item No.尺寸 DIMENSIONE DΦdΦW B LCSC1.5-4 4.2 3.3 1.88.0 5.016.0 CSC1.5-5 5.2 3.3 1.810.0 5.017.0 CSC1.5-6 6.5 3.3 1.810.0 5.018.0 CSC2.5-4 4.2 3.6 2.48.07.018.0 CSC2.5-5 5.2 3.6 2.410.07.020.0 CSC2.5-6 6.5 3.6 2.410.07.020.0 CSC2.5-88.4 3.6 2.412.57.023.0CSC4-4 4.2 4.4 3.110.07.020.0CSC4-5 5.2 4.4 3.110.07.020.0CSC4-6 6.5 4.4 3.110.07.020.0CSC4-88.4 4.4 3.112.57.023.0CSC6-4 4.2 5.1 3.810.09.023.0CSC6-5 5.2 5.1 3.810.09.024.0产品规格CSC6-6 6.5 5.1 3.812.09.024.0 CSC6-88.4 5.1 3.812.59.026.0 CSC6-1010.5 5.9 4.015.09.028.0 CSC10-5 5.2 5.8 4.512.09.025.0 CSC10-6 6.5 5.8 4.512.09.025.0 CSC10-88.4 5.8 4.512.59.027.0 CSC10-1010.5 5.8 4.515.09.029.0 CSC10-1213.0 5.8 4.517.09.031.0 CSC16-5 5.2 6.6 5.412.012.030.0 CSC16-6 6.5 6.6 5.412.012.030.0 CSC16-88.4 6.6 5.412.512.030.0 CSC16-1010.5 6.6 5.416.012.033.0 CSC16-1213.0 6.6 5.417.012.035.0 CSC25-5 5.28.3 6.813.012.033.0 CSC25-6 6.58.3 6.813.012.033.0 CSC25-88.48.3 6.815.012.033.0 CSC25-1010.58.3 6.818.012.034.0 CSC25-1213.08.3 6.818.012.035.0 CSC25-1415.08.3 6.820.012.038.0 CSC35-5 5.210.08.216.014.038.0 CSC35-6 6.510.08.216.014.038.0 CSC35-88.410.08.216.014.038.0 CSC35-1010.510.08.218.014.039.0 CSC35-1213.011.68.219.014.040.5 CSC35-1415.011.68.220.014.042.0 CSC50-6 6.511.69.517.816.045.0 CSC50-88.411.69.517.816.045.0 CSC50-1010.511.69.517.816.045.0 CSC50-1213.011.69.520.016.045.0 CSC50-1415.011.69.522.016.046.0 CSC50-1617.011.69.524.016.047.0 CSC70-88.413.811.220.420.052.0 CSC70-1010.513.811.220.420.052.0 CSC70-1213.013.811.220.420.052.0 CSC70-1415.013.811.220.420.052.0 CSC70-1617.013.811.225.020.053.0 CSC95-88.416.413.524.023.058.0 CSC95-1010.516.413.524.023.058.0 CSC95-1213.016.413.524.023.058.0 CSC95-1415.016.413.524.023.058.0 CSC95-1617.016.413.524.023.058.0 CSC120-88.418.215.027.022.063.0 CSC120-1010.518.215.027.022.063.0 CSC120-1213.018.215.027.022.063.0 CSC120-1415.018.215.027.022.063.0 CSC120-1617.018.215.027.022.063.0 CSC120-2021.018.215.027.022.063.0 CSC150-88.419.916.529.526.070.0 CSC150-1010.519.916.529.526.070.0 CSC150-1213.019.916.529.526.070.0CSC150-1415.019.916.529.526.070.0 CSC150-1617.019.916.529.526.070.0 CSC150-2021.019.916.529.526.070.0 CSC185-1010.522.118.532.532.075.0 CSC185-1213.022.118.532.532.075.0 CSC185-1415.022.118.532.532.075.0 CSC185-1617.022.118.532.532.075.0 CSC185-2021.022.118.532.532.075.0 CSC240-1010.525.521.037.038.090.0 CSC240-1213.025.021.037.038.090.0 CSC240-1415.025.021.037.038.090.0 CSC240-1617.025.021.037.038.090.0 CSC240-2021.025.021.037.038.090.0 CSC300-1010.528.223.541.542.098.0 CSC300-1213.028.223.541.542.098.0 CSC300-1415.028.223.541.542.098.0 CSC300-1617.028.223.543.042.098.0 CSC300-2021.028.223.543.042.098.0 CSC400-1010.534.328.550.544.0110.0 CSC400-1213.034.328.550.544.0110.0 CSC400-1415.034.328.550.544.0110.0 CSC400-1617.034.328.550.544.0110.0 CSC400-2021.034.328.550.544.0110.0 CSC500-1010.536.530.053.548.0120.0 CSC500-1213.036.530.053.548.0120.0 CSC500-1415.036.530.053.548.0120.0 CSC500-1617.036.530.053.548.0120.0 CSC500-2021.036.530.053.548.0120.0 CSC630-1010.542.235.062.556.0140.0 CSC630-1213.042.235.062.556.0140.0 CSC630-1415.042.235.062.556.0140.0 CSC630-1617.042.235.062.556.0140.0 CSC630-2021.042.235.062.556.0140.0图片介绍规格书下载PDF PDF PDF PDF PDF 接线端子UL日成端子镀锡环保证书日成端子材料环保证书日成接线端子CE证书日成端子CE证书产品目录相关产品JY1-2连接接线端子1 JY1-2连接接线端子JWD9框式螺钉接线端子1 JWD9框式螺钉接线端子 SA…JWD1框式螺钉接线端子1 JWD1框式螺钉接线端子 UK…日成收缩中间端子 B HS日成收缩中间端子 BHS日成收缩绝缘端子 YF-HS日成收缩绝缘端子 YF-HS日成尼龙双线管形端子 EWN日成尼龙双线管形端子 EWN日成尼龙管形绝缘端子 ETN日成尼龙管形绝缘端子 ETN日成收缩绝缘端子 PV-HD日成收缩绝缘端子 PV-HD日成收缩绝缘端子 LVB -HD日成收缩绝缘端子 LVB-HD日成收缩绝缘端子 LVA-HD日成收缩绝缘端子 LVA-HD日成收缩绝缘端子 RF-HS日成收缩绝缘端子 RF-HS日成圆形尼龙绝缘端子 RFN日成圆形尼龙绝缘端子 RFN日成叉形尼龙绝缘端子 YFN日成叉形尼龙绝缘端子 YFN日成尼龙中间端子 B N日成尼龙中间端子 BN日成尼龙旗形端子 FN日成尼龙旗形端子 FN日成尼龙全绝缘公端子 PNB日成尼龙全绝缘公端子 PNB日成尼龙全绝缘母端子 PNA日成尼龙全绝缘母端子 PNA日成易进绝缘端子 ERF日成易进绝缘端子 ERF日成易进绝缘端子 EYF日成易进绝缘端子 EYF日成片形易进绝缘端子 ED…日成片形易进绝缘端子 EDBF日成针型易进绝缘端子 EP…日成针型易进绝缘端子 EPINF日成针型裸端子 PI N日成针型裸端子 PIN日成针型预绝缘端子 PI NF日成针型预绝缘端子 PINF日成片形裸端子 DB N日成片形裸端子 DBN日成片形绝缘尼龙端子 DB F日成片形绝缘尼龙端子 DBF日成型钩形接线端子 MF日成型钩形接线端子 MF日成母全绝缘端子 PV日成母全绝缘端子 PV日成中间裸端子 B C日成中间裸端子 BC日成全绝缘中间端子 B F日成全绝缘中间端子 BF日成子弹型母绝缘端子 FA日成子弹型母绝缘端子 FA更多返回铜管端子 >环保线槽电缆接头金属接头尼龙扎带尼龙软管接线端子铜管端子金属软管热收缩管护线套固定座配线标志结束带尼龙铆钉尼龙螺丝接线头隔离柱夹线套工具新品&配件网站首页 / 产品目录 / 铜管端子日成铜管端子 SC日成铜管端子 SC日成铜管端子 ASC日成铜管端子 ASC日成铜管端子 B SC日成铜管端子 BSC日成窥口接线端头 CSC日成窥口接线端头 CSC日成铜管端子 HUP日成铜管端子 HUP日成铜管端子 DT日成铜管端子 DT日成铜管端子 T日成铜管端子 T日成铜管端子 TL日成铜管端子 TL日成铜管端子 AES日成铜管端子 AES日成喇叭口铜管端子 HES日成喇叭口铜管端子 HES日成加长铜管端子 HESL日成加长铜管端子 HESL日成喇叭口铜管端子 FC日成喇叭口铜管端子 FC日成铜管端子 TT日成铜管端子 TT日成窄头铜管端子 K L90日成窄头铜管端子 KL90日成窄头铜管端子 SG日成窄头铜管端子 SG日成铜管端子 LYF日成铜管端子 LYF日成加厚铜管裸端子 LYF90日成加厚铜管裸端子 LYF90日成铜管裸端子 LYF45日成铜管裸端子 LYF45日成铜管裸端子 GC90日成铜管裸端子 GC90日成铜管裸端子 GC45日成铜管裸端子 GC45日成铜管端子 DI N 日成铜管端子 DIN 日成圆形裸端子 DI N日成圆形裸端子 DIN日成铜管端子 DTS日成铜管端子 DTS日成铜管端子 C45日成铜管端子 C45日成铜管端子 TPE 日成铜管端子 TPE 日成扁形铜管端子 CP日成扁形铜管端子 CP日成铜管端子 HP日成铜管端子 HP日成喇叭口铜管端子 TU日成喇叭口铜管端子 TU日成美规铜管端子 AWG 日成美规铜管端子 AWG 日成铜管端子 CL-H日成铜管端子 CL-H日成铜管端子 CL-H2日成铜管端子 CL-H2日成铜管端子 HUP90日成铜管端子 HUP90日成双孔铜管端子 AD 日成双孔铜管端子 AD 日成高压中间祼铜端子 B L日成高压中间祼铜端子 BL日成裸端子 K S日成裸端子 KS日成加厚针形绝缘端子 K SN日成加厚针形绝缘端子 KSN共45条记录， 1/1页首页上一页1下一页末页日成OT 圆形开口接线端子日成OT 圆形开口接线端子日成铜管端子 HUPD日成铜管端子 HUPD日成铜管端子 HUPD90特点:90度端头日成铜管端子 HUPD45日成铜管端子 HUPD45日成3M 电工胶带日成3M 电工胶带日成3M 自粘橡胶防水胶带日成3M 自粘橡胶防水胶带日成高压黄腊带日成高压黄腊带日成接线端子盒套装日成接线端子盒套装日成绝缘子日成绝缘子2016/11/14产品目录 - 线槽扎带接头软管端子线束上海日成电子有限公司RCCN环保线槽电缆接头金属接头尼龙扎带尼龙软管接线端子铜管端子金属软管热收缩管护线套固定座配线标志结束带尼龙铆钉尼龙螺丝接线头隔离柱夹线套工具新品&配件环保线槽电缆接头金属接头尼龙扎带尼龙软管接线端子铜管端子金属软管热收缩管护线套固定座配线标志网站首页 / 产品目录日成环保粗齿线槽 VDRF 日成环保细齿线槽 HVDRF 日成环保闭口线槽 VDRC 日成密封阻燃线槽 SDR 日成粗齿阻燃线槽 VDR 日成细齿阻燃线槽 HVDR 日成细齿阻燃线槽 HVDRT4日成细齿阻燃线槽 HVDRT 日成粗齿阻燃线槽 VDRT日成公制电缆接头 AG 日成德制电缆接头 PG 日成美制电缆接头 NPT 日成英制电缆接头 G 日成公制电缆防水接头 ST-M 日成公制电缆接头 MGA 日成德制电缆接头 PGA 日成公制电缆接头 MGB 日型电缆防水接头PGB NPT防电磁金属电缆接头日成半爪加厚金属电日成全爪加厚金属电日成耐高温金属电缆防电磁金属电缆接头防电磁金属电缆接头日成半爪金属电缆防日成耐扭金属电缆防日成双锁式金属电缆日成自锁式尼龙扎线带 G 日成超宽型尼龙扎线带 GEHD 日成抗紫外线扎带 GUV 日成耐候性超宽尼龙线带 GUV 日成耐寒型尼龙扎带 GCS 日成耐热型尼龙扎线带 GHS 日成防火级尼龙扎线带 GV0日成彩色尼龙扎线带日成标牌尼龙扎线带 MCV日成PA 尼龙波纹管日成PA 尼龙阻燃波纹管日成PA 尼龙剖开式波纹管日成PA 阻燃尼龙剖开软管日成HDPE 波纹管日成HDPEV0阻燃波纹管日成HDPE 剖开式波纹管日成HDPEV0阻燃黑色波纹管日成LDPE 波纹管日成圆形预绝缘端子日成R 型圆形裸端子日成叉形预绝缘端子日成Y 型裸端子日成欧式管形预绝缘日成双线管形预绝缘日成管形裸端子 EN日成母预绝缘端子 L日成公预绝缘端子 L日成铜管端子 SC 日成铜管端子 ASC 日成铜管端子 BSC 日成窥口接线端头 CSC 日成铜管端子 HUP 日成铜管端子 DT 日成铜管端子 T 日成铜管端子 TL 日成铜管端子 AES日成金属软管接头 NBG 日成铜制金属软管接头 TNBG 日成金属软管防水接头 NBL 日成90度金属软管接头 NBW 日成45度金属软管接头 NBN 日成内螺纹金属软管接头 NBF 日成锁紧式金属软管接头 NBE 双头固定式金属软管接头 NBK 日成外牙镀锌管接头 ELZ日成热收缩管 HST日成超薄热收缩管 H日成黄绿热收缩管2日成含胶热收缩套管日成高压母排保护套日成含胶热收缩套管日成耐老化冷缩管 E日成硅橡胶耐高温套日成硅树脂黄腊管 S日成电源线扣-新 SR 日成线扣钳 KT-1日成电源线扣 SR 日成光纤孔塞 HP 日成直角型电源线扣日成耐扭式电源线扣日成直角耐扭式电源线扣日成扣式护线套 SB 日成开口扣式护线套 OSB日成粘式扎线固定座 HC 日成锁式扎线固定座 HC 日成插鞘式扎线固定座 PHC 日成配线固定钮 UC 日成闭口连接环 CR 日成可调式配线固定座 AC 日成粘式配线固定座 JS 日成插鞘式固定座 LWC 日成可调式配线固定座 AP日成配线标志 EC日成彩色配线标志 E 日成扁型配线标志 E日成配线标志箱 EC 日成标志靶号码带日成电缆牌 MS 日成空白胶管 OMR 电脑线号机 LM-380日成配线标志 OM2016/11/14产品目录 - 线槽扎带接头软管端子线束上海日成电子有限公司RCCN/products_rccn_2.html 2/2结束带尼龙铆钉尼龙螺丝接线头隔离柱夹线套工具新品&配件日成卷式结束带 KS/S 日成卷式结束带 KS日成阻燃卷式结束带 KSV0/S 日成阻燃卷式结束带 KSV0日成开口式结束带 KP 日成可扩充编织网 PET 日成开口编织网 PETO 日成彩色编织网 PET-X 日成防电磁编织网带 EMC日成尼龙铆钉 SR日成公母可退式尼龙铆钉 SG 日成旋转式尼龙铆钉 SRC 日成尼龙铆钉 SRT 日成平头尼龙铆钉 SRH 日成耐高温尼龙铆钉 SRHR 日成长型捶式尼龙铆钉 SR 日成短型捶式尼龙铆钉 SRS 日成脚垫 FF日成螺丝/尼龙螺丝日成塑胶螺母 PN 日成塑胶垫片 PW日成尼龙螺丝 NCRS日成尼龙螺丝 NSPH日成尼龙螺丝 NSCS日成尼龙螺丝 NSCH日成尼龙螺丝 NSOH日成尼龙螺丝 NSCR日成闭端端子 CE 日成阻燃闭端端子 CEV0日成弹簧螺式接线头 SWB 日成翅膀螺式接线头 SWY 日成耐高温螺式接线头 SWHB 日成电线接线夹 KW 日成端子台 PA日成端子台底部垫高 PAH 日成阻燃端子台 PAV0日成六角隔离柱 HTS 日成六角内螺纹隔离柱 HTP 日成直通圆体隔离柱 LED 日成PC 板尼龙轨道 BT 日成隔离柱 CS 日成PC 板隔离柱 SP 日成隔离柱 CS 1日成平底隔离柱 RS 平底隔离柱 RLS日成PC 板夹线套 MW日成PC 板夹线套 NW日成PC 板夹线套 LW日成PC 板夹线套 SO日成PC 板夹线套 BH日成PC 板夹线套 MW日成PC 板夹线套 MW 日成PC 板隔离柱 CB日成尼龙铆钉 MP扎线枪 TG-9日成美制扎线枪 TG-1日成扎线枪TG-2日成扎线枪TG-3日成扎线枪TG-4日成扎线枪TG-5日成不锈钢带扎线枪TG-6日成不锈钢带扎线枪TG-7日成不锈钢带扎线枪TG-82.8插簧端子 DJ621-E2.8A-B 2.3插簧端子DJ621-2.3A-B 6.3插簧端DJ622-D6.3A-D 新品:各类硅胶密封产品展示3新品:各类硅胶密封产品展示2新品:各类硅胶密封产品展示1新品：线束集成产品003新品：线束集成产品002新品：线束集成产品001。

XTC7004G;中文规格书,Datasheet资料

Page 2 of 3 XTC7004G - 4/4/11
/
Reel Dimensions
Tape Dimensions
E-mail: info@ ©2010-2011 by RF Monolithics, Inc.
Page 3 of 3 XTC7004G - 4/4/11
Sym
FO
Notes
Minimum
Typical
16.367667
Maximum
Units
MHz
±2 ppm maximum @ 25 ±3 °C -40 -30 2.70 0.8 Clipped Sinewave 1.5 mA 2.85 +85 +85 3.00 °C °C V VP-P
Pin Connections
H
M L
1
2
K J
PCB Land Pattern (Top View)
Case Materials
Materials
V
Solder Pad Plating
D D
0.3 to 1.0 µm Gold over 1.27 to 8.89 µm Nickel 2.0 to 3.0 µm Nickel Al2O3 Ceramic Pb Free
Lid Plating Body
1
2
T e m p C o m p C r O s c
e ra tu re e n s a te d y s ta l illa to r
3
4
1 0 n F
O u tp u t
TCXO Application Circuit
E-mail: info@ ©2010-2011 by RF Monolithics, Inc.

亿光光藕EL817规格书

Photocoupler-RoHS Compliant EL817 SeriesFeatures: • Current transfer ratio(CTR:MIN.50% at IF =5mA ,VCE =5V) • High isolation voltage between input and output (Viso=5000 V rms ) • Compact dual-in-line package EL817*:1-channel type • Pb free• UL approved (No. E214129) • VDE approved (No. 132249) • SEMKO approved (No. 608400)• NEMKO approved (No. PO6206474/A1) • DEMKO approved (No. 313924-01)• FIMKO approved (No. FI 22807) • CSA approved (No. 1143601) • BSI approved (No. 8592, 8593) • Options available:- Leads with 0.4”(10.16mm) spacing (M Type)- Leads bends for surface mounting (S and S1 Type) - Tape and Reel of Type for SMD(Add”TA” Suffix)Ⅰ - Tape and Reel of Type Ⅱfor SMD(Add”TB” Suffix) - The tape is 16mm and is wound on a 33cm reel• The product itself will remain within RoHS compliant version.DescriptionThe EL817 series contains a infrared emitting diode optically coupled to a phototransistor. It is packaged in a 4-pin DIP package and available in wide-lead spacing and SMD option.Applications• Computer terminals• System appliances, measuring instruments• Registers, copiers, automatic vending machines• Signal transmission between circuits of different potentials and impedancesDevice Selection GuideChip MaterialPart. No.IR PTEL817* GaAs SiliconEL817EL817SEL817MPhotocoupler-RoHS CompliantEL817 SeriesPhotocoupler-RoHS CompliantEL817 SeriesS1 TypeNotes:1.Rank shall be or shall not be marked2.Factory code shall be marked (T: Taiwan / C: China)3.Year date code4.2-digit work week5.All dimensions are in millimeters6.Specifications are subject to change without noticePhotocoupler-RoHS Compliant EL817 SeriesAbsolute Maximum Ratings ( Ta=25°C )Parameter Symbol Rating UnitForward Current I F 50 mAPeak Forward Current*1I FM 1 A Input Reverse VoltageV R 6 V Power Dissipation P 70 mWCollector Power DissipationP C 150 mW Output Collector CurrentI C 50mA Collector-Emitter Voltage V CEO 35 V Emitter-Collector Voltage V ECO 6V Total Power DissipationPtot 200 mW *2Isolation Voltage Viso 5000 V rms Operating TemperatureTopr -55~+110 °C Storage TemperatureTstg -55~+125 °C *3Soldering TemperatureTsol260°C*1Frequency=100 HZ ,10uS Duty*2AC for 1 minute, R.H= 40~ 60%RH-Isolation voltage shall be measured using the following method. (1) Short between anode and cathode on the primary side and between collector, emitter and base on the secondary side.(2) The isolation voltage tester with zero-cross circuit shall be used. (3) The waveform of applied voltage shall be a sine wave*3For 10 secondsPhotocoupler-RoHS Compliant EL817 SeriesElectro-Optical Characteristics (Ta=25°C)Parameter Symbol Min. Typ. Max. Unit ConditionForward V F - 1.2 1.4 V I F =20mA Peak ForwardCurrent V FM 3.0 V I FM =0.5A Reverse Current I R - - 10 uAV R =4VInputTerminal Ct - 30 250 pF V=0,f=1kHz Collector Dark currentI CEO - - 100 nAV CE =20VOutputCollector- Emitter breakdown voltage BV CEO 35 - - V Ic=0.1mACurrent Transfer ratio CTR 50-600 % I F =5mA ,V CE =5VCollector- Emitter saturation voltageV CE(sat) - 0.1 0.2 V I F =20mA ,Ic=1 mAIsolation resistance R ISO 5×1010 1011 - ΩDC500V,40~60%R.HFlotation capacitance Cf - 0.6 1.0 pF V=0, f=1MHz Cut-off frequency fc - 80 - kHz V CE =5V, I C =2 mAR L =100Ω, -3dBRise time t r - 4 18 us Transfer CharacteristicsFall timet f - 3 18 usV CE =2VI C =2mA,R L =100ΩPhotocoupler-RoHS CompliantEL817 Series SupplementCurrent Transfer Ratio CTRSub-Model No. Rank mark CTR (%) ConditionEL817* note 1 50 to 600EL817* (L) note2L 50 to 100EL817* (A) A 80 to 160EL817* (B) B 130 to 260 EL817* (C) C 200 to 400 EL817* (D) D 300 to 600 EL817* (AB) A or B 80 to 260 EL817* (BC) B or C 130 to 400 EL817* (CD) C or D 200 to 600 I F = 5 mA V CE = 5 V T a = 25°CNote1. The symbol “ * “ can be none or S or M by different leads form request Note2. The symbol “ ( ) ” can be CTR rankPhotocoupler-RoHS CompliantEL817 Series RELIABILITY PLANz The reliability of products shall be satisfied with items listed below.Confidence level : 90 % , LTPD : 10 %Classification Test Item Description & Condition (Acc.)Sample FailureCriteriaReferenceStandardOperation Life * Ta = 25±3°CIR: If = 50 mAPt: Pc = 130 mW ( Vf=1.4v) , 1000 hrs 0 / 22 MIL-S-750 : 1026MIL-S-883 : 1005JIS C 7021 : B-1High Temperature / High Humidity Reverse Bias (H3TRB) Ta = 85 ±3°C , Humi. = 85 % rhPt: 80% * Vce (max rating) , 1000 hrs0 / 22 JIS C 7021 : B-11High Temperature Reverse Bias (HTRB) Ta = 105 ±3°CPt: 100% * Vce (Max rating) ,1000 hrs0 / 22 JIS C 7021 : B-8Low Temperature Storage Ta = -50 ±3°C , 1000 hrs 0 / 22 JIS C 7021 : B-12High Temperature Storage Ta = 125 ±3°C , 1000 hrs 0 / 22 JIS C 7021 : B-10MIL-S-883 : 1008 Endurance testAuto clave P = 15 PSIG , Ta = 121 °C ,Humi. = 100 % rh , 48 hrs0 / 22 JESD 22-A102-BTemperature Cycling (Air to Air) 125°C ~ - 55 °C30 ~ 30 min , 100 cycles0 / 22 MIL-S-883 :1010JIS C 7021 : A-4Thermal Shock (Liquid to Liquid) 125 ~ - 55°Ct (dwell) = 5 mint (trans.) = 10 sec , 100 cycles0 / 22 MIL-S-202 : 107DMIL-S-750 : 1051MIL-S-883 :1011Solder Resistance Ta = 260 ±3°Ct (dwell) = 10 ±1 sec 0 / 22 MIL-S-750 : 2031JIS C 7021 : A-1Environmental TestSolder Ability Ta = 230 ±3 °Ct (dwell) = 5 ±1 sec 0 / 22CTR shift > 1.2Vf > U* 1.0Ir > U * 1.0Vce(sat) >U*1.0Bvceo < L*1.0Bveco < L*1.0L :LowSpec.LimitU : Up Spec.LimitMIL-S-883 : 2003JIS C 7021 : A-2Photocoupler-RoHS CompliantEL817 Seriesz Packing Quantity1.100 Pcs/ Per Tube2.25 Tubes / Inner Carton3.12 Inner Cartons / Outside Carton3. Outside Carton。

接线端子冷压端头接线端子标准接线端子规格 (1)

1/3
2016/11/14
铜管端子 - 产品目录 - 线槽扎带接头软管端子线束上海日成电子有限公司RCCN
日成加厚铜管裸端子 LYF90 日成加厚铜管裸端子 LYF90
日成铜管裸端子 LYF45 日成铜管裸端子 LYF45
日成铜管裸端子 GC 90 日成铜管裸端子 GC90
日成铜管裸端子 GC 45 日成铜管裸端子 GC45
日成尼龙铆钉 SR 日成公母可退式尼龙铆钉 SG 日成旋转式尼龙铆钉 SRC 日成尼龙铆钉 SRT 日成平头尼龙铆钉 SRH 日成耐高温尼龙铆钉 SRHR 日成长型捶式尼龙铆钉 SR 日成短型捶式尼龙铆钉 SRS 日成脚垫 FF
接线头
日成闭端端子 CE 日成阻燃闭端端子 CEV0 日成弹簧螺式接线头 SWB 日成翅膀螺式接线头 SWY 日成耐高温螺式接线头 SWHB 日成电线接线夹 KW 日成端子台 PA 日成端子台底部垫高 PAH 日成阻燃端子台 PAV0
日成高压中间祼铜端子 B L 日成高压中间祼铜端子 BL
日成裸端子 K S 日成裸端子 KS
日成加厚针形绝缘端子 K SN 日成加厚针形绝缘端子 KSN
/products_LugTerminals_14.html
2/3
2016/11/14
铜管端子 - 产品目录 - 线槽扎带接头软管端子线束上海日成电子有限公司RCCN
2016/11/14
产品目录 - 线槽扎带接头软管端子线束上海日成电子有限公司RCCN
结束带
尼龙铆钉
日成卷式结束带 KS/S 日成卷式结束带 KS 日成阻燃卷式结束带 KSV0/S 日成阻燃卷式结束带 KSV0 日成开口式结束带 KP 日成可扩充编织网 PET 日成开口编织网 PETO 日成彩色编织网 PET-X 日成防电磁编织网带 EMC

1206;1205;中文规格书,Datasheet资料

CAT.NO.1209(Screw Installed)CAT.NO.1207(Screw Supplied Unassembled)CAT.NO.1205(No Screw Supplied)CAT.NO.1283(Screw Installed)CAT.NO.1208(Screw Supplied Unassembled)CAT.NO.1206(No Screw Supplied)CAT.NO.1299(Screw Supplied Unassembled)CAT.NO.1202(Screw Installed &Captivated)CAT.NO.1201(Screw Installed &Captivated)CAT.NO.1298(Screw Supplied Unassembled)S C R E W T E R M I N A L S66HEAVY DUTY SCREW TERMINALS -30AMPThese sturdy,low cost screw terminals,feature an anti-rotation tab for use with spade terminals.They are available with the screw installed and captivated,the screw unassembled or without a screw..093[2.36].187[4.8].406[10.3].375[9.6].437[11.1]DIA..250[6.4].125[3.2]10-32 x .250 [6.3] L.SCREW.156[4.0]PRINCIPLE FEATURES•Easy to connect using solid or stranded wire,crimp lugs or terminals•Anti-rotation tab for use with spade terminals •Supplied with screw installed and captivated,with screw unassembled,or without screw •Stainless steel screw will not wickSPECIFICATIONSRated:15AmpsTerminal:.032(.81)Brass,Matte Tin Plate Screw:Combination drive,Stainless SteelSPECIFICATIONSRated:30AmpsTerminal:.062(1.6)Brass,Matte Tin Plate Screw:Combination drive,Stainless SteelMounting DetailMounting DetailThese heavy duty terminals are available with the screw installed or unassembled,and feature easy access to connect solid or stranded wire,crimp type lugs or terminals..375 [9.5]DIA.8-32 x .375 [9.5] L.SCREW.115 [2.9].531[13.5].437[11.1].140[3.6].297[7.6].406 [10.3].109[2.8]45°45°.109[2.8].406 [10.3].297[7.6].140[3.6].437[11.1].531[13.5].115 [2.9]10-32 x .375 [9.5] L.SCREW.375 [9.5]DIA..210 [5.3] DIA..077 [1.96].126 [3.2].470[12.0]SPECIFICATIONSRated:15AmpsTerminal:.064(1.6)Brass,Matte Tin Plate Screw:Brass,Nickel PlateSPECIFICATIONSRated:30AmpsTerminal:.064(1.6)Brass,Matte Tin Plate Screw:Steel,Nickel PlateMounting Detail.470[12.0].126 [3.2].077[1.96].210 [5.3] DIA.Mounting DetailPRINCIPLE FEATURES•Anti-rotation tab for use with spade terminals•Below the board notched leg,to facilitate mechanical and solder connections•Easy to connect using solid or stranded wire,crimp lugs or terminals•Available with screw installed,unassembled,or without screw.187[4.7]DIA..110[2.8].340[8.7].210 [5.3] DIA..075[1.9].142[3.6].472 [12.0].156[4.0].328[8.4].187 [4.8].094 [2.4].375 [9.5]DIA..100[2.6].062 [1.57]6-32x .250[6.3] L.SCREWLOW PROFILE SCREW TERMINALS10-328-32CAT.NO.1284(No Screw Supplied)CAT.NO.1293(No Screw Supplied)10-326-32Tel (718)956-8900•Fax (718)956-9040(800)221-5510•kec@31-0720th Road –Astoria,NY 11105-2017RoHS COMPLIANT ~ISO 9001CERTIFIED®THRU HOLECAT.NO.8730(Screw Installed).102 [2.6].039[1.00]DIA..187 [4.8].197 [5.0].157[4.0]SQUAREM2.5 x .156[4.0]L.SCREW.110 [2.8] DIA.HOLE THRUSPECIFICATIONSTerminal:Brass,Tin Plate Screw:Steel,Zinc Plate Mounting Hole:.047(1.2)Current Rating:15AMPWIRE CONTACTCAT.NO.8737(Screw Installed)CONTACT .197[5.0].039[1.0].192[4.9].105[2.7]DIA.THRU..158[4.0]SQUAREM2.5X 4.0L.SCREWSPECIFICATIONSTerminal:Brass,Tin Plate Screw:Steel,Zinc PlateContact:Phoshorus Bronze,Tin Plate Mounting Hole:.047(1.2)Current Rating:15AMP分销商库存信息: KEYSTONE-ELECTRONICS 12061205。

1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。

2016/12/8Terminals TU - Copper tube terminal - RCCN
http://en.rccn.com.cn/content_products_211.html1/3
Home / Products / Copper tube terminal / RCCN Terminals TU

RCCN Terminals TU
Bell-mouth Copper Ture Terminals

Bell-mouth Copper Ture Terminals TU

Item No.EDφdφWBL
TU10-55.36.94.410.5927
TU10-66.46.94.410.5927
TU10-88.46.94.4141035
TU10-1010.46.94.4161039
TU10-1212.86.94.4181039
TU16-55.385.6111129.5
TU16-66.485.6111129.5
TU16-88.485.6141138
TU16-1010.485.6161142
TU16-1212.885.6181142

Specification
2016/12/8Terminals TU - Copper tube terminal - RCCN
http://en.rccn.com.cn/content_products_211.html2/3
TU25-55.39.5713.51340
TU25-66.49.5713.51340
TU25-88.49.5713.51340
TU25-1010.49.57161344
TU25-1212.89.57181344
TU35-55.3118.215.51441
TU35-66.4118.215.51441
TU35-88.4118.215.51441
TU35-1010.4118.215.51445
TU35-1212.8118.2181445
TU35-1414.5118.2201450
TU50-55.312.19.517.21846
TU50-66.412.19.517.21846
TU50-88.412.19.517.21846
TU50-1010.412.19.517.21850
TU50-1212.812.19.517.21850
TU50-1414.512.19.5201855
TU50-1616.512.19.5221855
TU70-55.31511.521.21848
TU70-66.41511.521.21848
TU70-88.41511.521.21848
TU70-1010.41511.521.21852
TU70-1212.81511.521.21852
TU70-1414.51511.521.21863
TU70-1616.51511.521.21863
TU95-88.41713.524.32458
TU95-1010.41713.524.32458
TU95-1212.81713.524.32458
TU95-1414.51713.524.32469
TU95-1616.51713.524.32469
TU120-88.4191527.22773
TU120-1010.4191527.22773
TU120-1212.8191527.22773
TU120-1414.5191527.22773
TU120-1616.5191527.22773
TU120-2021191527.22773
TU150-88.42116.5302778
TU150-1010.42116.5302778
TU150-1212.82116.5302778
TU150-1414.52116.5302778
TU150-1616.52116.5302778
TU150-20212116.5302778
TU185-1010.42318.533.53082
TU185-1212.82318.533.53082
TU185-1414.52318.533.53082
TU185-1616.52318.533.53082
TU185-20212318.533.53082
TU240-1010.4262137.73288
TU240-1212.8262137.73288
TU240-1414.5262137.73288
2016/12/8Terminals TU - Copper tube terminal - RCCN
http://en.rccn.com.cn/content_products_211.html3/3
More
TU240-1616.5262137.73288
TU240-2021262137.73288
TU300-1010.42823413797
TU300-1212.82823413797
TU300-1414.52823413797
TU300-1616.52823413797
TU300-20212823413797

z
Product Copper tube terminal >

Product Show
Download

RCCN Bell mouth brass termi…Catalogue-PDF
Related Proudct

RCCN Terminals TU
Bell-mouth Copper Ture Ter…

PDF