起亚狮跑使用维护说明书
Honda 车辆维护指南说明书
Air Cleaner FilterSee your Maintenance Schedule for change intervals. If the car is operated in dusty areas it will require more frequent element replacement. Your Honda Dealer can be of assistance in determining the properreplacement frequency for the conditions under which you operate your vehicle.Do not attempt to clean the air filter. The filter is designed to provide normal filteringefficiency between replacement intervals.For maximum protection, it is advisable to use genuine Honda air cleaner filters as replacements,Never run the engine with the air cleaner filter removed. If the engine should backfire, it could possibly cause an engine compartment fire.Be sure to reinstall the air cleaner filter and assembly correctly. If it is installed incorrectly, engine damage could result.Manual Transmission FluidMUA ModelSee the Maintenance Schedule to find out how often the lubricant level should be checked.Check that the fluid level reaches the plug hole by removing the filler plug on the transaxle case,If the fluid level is low, refill the case up to the filler plug hole,Use a high-quality engine oil labeled SG or SF that is of the correct viscosity for existingambient temperatures as follows.Care and Maintenance(2WD)OIL FILL PLUGDRAIN PLUGBW ModelThe transmission fluid in this model does not require periodic changing. Add lubricant, ifneeded, to fill to the level of the filler plug hole.Use only DEXRON IIE fluid.USE DEXRON IIE ATF ONLYThe BW-T5 transmission is used only on the 2-wheeI drive 4-cvIinder model.Care and MaintenanceFILL PLUG(4WD)RIGHT SIDELEFT SIDEDRAIN PLUGDRAIN PLUGAutomatic Transmission FluidProper FluidYou can buy this fluid from your Honda Dealer.Checking Transmission Fluid LevelCheck the automatictransmission fluid level at each engine oil change. Overfilling can cause foaming and loss of fluid. A low fluid level can cause slipping in the transmission. In either case,transmission damage can result.If you have driven for aprolonged period of time or in city traffic in hot weather, wait until the fluid cools down (approximately 30 minutes)before checking the fluid level.In very cold weather, check the fluid level only after the vehicle has completely warmed up.Add just enough DEXRON HE fluid to fill the transmission. DO NOT OVERFILL.Remove the dipstick located in the engine compartment.Carefully touch the wet end of the dipstick to find out if the fluid is cool, warm or hot. Wipe the dipstick clean and push it back in until the cap seats. Pull out the dipstick and read thefluid level.If it feels warm, about thenormal operating temperature of 158° to 176°F (70° to 80°C),the level should be in the"HOT" range.If it feels cool, about room temperature of 68° to 86 °F (20° to 30 °C), the level should be in the "COLD" range.The transmission fluid level check must be performed with the vehicle at normal operating temperature. Inspections at any other temperatures should only be considered to be reference checks and may not reflect the actual fluid level.Care and MaintenanceCOLD RANGEHOTRANGEFront (4WD) and Rear AxlesDrain IntervalsSee your Maintenance Schedulefor drain intervals.Change the transmission fluidand service the filter screen atdrain intervals.See the Maintenance ScheduleList to determine how often thelubricant should be changed.Add lubricant, if needed, byfilling to the level of the fillerplug hole. Use GL-5 gearlubricant of the proper viscosityas shown below.If your vehicle is equipped withthe optional limited slipdifferential (on the rear axle),use GL-5 Limited Slip DifferentialGear Lubricant of the correctviscosity for the existing ambienttemperatures.Recommended LubricantCare and MaintenanceThe engine cooling system is designed to maintain the engine at the proper operating tempera-tures. The cooling system was filled at the factory with a quality engine coolant The engine cooling system is designed to me coolant (a mixture of water and ethyiene glycol antifreeze) rather than plain water. The engine coolant solution should be used year-round. It hasmany advantages such as:provides freezing protectionas low as - 33°F(- 36°C)provides boiling protection upto 262°F (128°C)protects against rust andcorrosion to the cooling system maintains the proper engine temperature for efficientoperation and emission control allows proper operation of the engine coolant temperature gaugeSee the Maintenance Schedule in this section to find out when the engine coolant must be replaced.Checking the Coolant LevelCheck the engine coolant level at the interval shown In the Mainte-nance Schedule unless there is evidence of leaking or over-heating. The engine cooiant level should be between the maximum and the minimum level marks on the radiator reserve tank.You usually do not need to remove the radiator cap to check the engine coolant level.Adding Engine CoolantTo add engine coolant, remove the cap on the radiator reserve tank and fill the tank up to the maximum level mark, Add a 50/50 mixture of water and a good quality ethyiene glycol antifreeze.Care and MaintenanceEngine Cooling SystemIf you need to add engine coolant frequently, see your Honda dealer for a cooling system, check.If the proper quality antifreeze is used there is no need to add extra inhibitors or additives.They may be harmful to the proper operation of the system.Cooing System ServiceThe cooling system should be serviced at the intervals specified, in the MaintenanceSchedule as follows:Wash the radiator cap andfilter neck with clean water.Check the engine coolant level In the radiator and have it tested for freeze protection.Add ethylene glycol antifreeze,If needed, to maintain freezeprotection at -33°F (-36°C).Have the cooling system and radiator cap tested for a pressure capacity of 15 psi (105 kPa), If a replacement cap is needed, use a cap specifiedfor your model.Tighten all radiator and heater hose clamps inspect all hoses. Replace the hoses if they are swollen, "cheeked," or otherwise worn. Carefullytighten the hose damps at the radiator. Overtightening could bend or collapse the radiatorfittings.Clean the front of the radiator core and air conditioning condenser.ft is the owner's responsibility to:Maintain the cooling system freeze protection at -33 "F ( -36°C) to ensure protection against corrosion and loss ofengine coolant from boiling.This should be done even if freezing temperatures are notexpected.Add ethylene glycol-based antifreeze when antifreeze has to be added because of engine coolant loss or if moreprotection against freezing at temperatures lower than -33°F (-3S°C) is needed. Do not use an alcohol-based or methanol based antifreeze, or plain water. They boil at a lower point, and do notprovide corrosion protection.Care and MaintenenceThermostatThe engine coolant temperature is controlled by a thermostat,which stops engine coolant flow through the radiator until a preset temperature is reached.This thermostat is installed in the engine coolant outlet on the engine cylinder head for L4-2.6L engine and is installed in the engine coolant inlet on the front of the engine block for V6-3.2L engine. The same thermostat is used in both winter and summer.Brake Master cylinderCheck the master cylinder fluid level in the reservoir every time you check the engine oil level.The level should be between the MAX and ADD level line. If the level Is lower than the ADD level line, fill to the MAX level line with DOT-3 or DOT-4 fluid.If the diaphragm Inside thereservoir cap is deformed, return it to the original (collapsed)condition, then tighten the cap.It is normal for the brake fluid level to go down slightly as the front brake pads wear. So be sure to keep the reservoir fluid at the proper level.If the reservoir needs frequent refilling, it may indicate a serious mechanical problem.Brake fluid absorbs water from the air. Never use brake fluid that has been open to the air for an extended period. Throw it away and use new brake fluid from a.sealed container.Brake fluid can damage your vehicle's paint. Thoroughly clean up any brake fluid spills.Care and MaintenanceOther Required MaintenanceNOTICEFront Wheel BearingsClean and repack the front wheel bearings at the interval shown in the Maintenance Schedule. Due to the weight of the tire and wheel assembly it is recommended that they be removed from the hub before lubricating the bearings to prevent damage to the oil seal."Long Fiber" grease should not be used to lubricate the wheel bearings. It can cause damage.Clean the old grease out of the bearings and hubs before repacking.Free-Wheeling HubsClean and lubricate the free-wheeling hubs at the same time the front wheel bearings are serviced as outlined in the Maintenance Schedule. Use EP multipurpose-type grease (NLGI No. 1 or 2).Hood Latch and HingesLubricate the hood latch assembly and hood hinge assembly as follows:1. Wipe off any accumulation of dirt or contamination on the latch parts.2. Apply multipurpose-type grease (NLGI No. 1 or 2) to the hood latch pin cam.3. Apply light engine oil to allpivot points in the release mechanism.4. Lubricate hood hinges withmultipurpose-type grease (NLGI No. 1 or 2).5. Check the hood hinges and latch mechanism to assure they are working correctly.Air ConditioningPeriodically have your Honda Dealer check your airconditioning system to be sure there has been no loss in cooling output. See your Honda Dealer if you suspect that the system is not performing as it should.Body LubricationNormal use of a vehicle causes metal-to-metal movement atcertain points in the body. Noise,wear and improper operation at these points will result when a protective film of lubricant is not provided.For exposed surfaces such as door checks, door lock bolts,lock striker plates, etc., apply a thin film of light engine oil.Any lubricant should be used sparingly. After application, allCare and Maintenance。
车辆工程毕业设计190四轮驱动汽车变速器设计说明书
摘要汽车作为人类的代步工具，在生活中起着越来越重要的作用。
变速器是传动系中的主要部件。
它用来改变发动机传到驱动轮上的转矩和转速。
目的是在各种工作状况下，使汽车获得不同的牵引力和速度。
从而使汽车拥有良好的动力性和燃油经济性。
本次设计以东风悦达起亚 2.0L手动档四驱狮跑车汽车的一些整车参数和发动机参数为设计依据，进行手动档变速器的设计。
设计的主要内容包括变速器传动机构布置方案的确定，变速器主要参数如挡数、传动比范围、中心距、各挡传动比、齿轮参数、各挡齿轮齿数的选择，齿轮、轴的设计校核，同步器、操纵机构及箱体的设计。
在设计的过程中，本文根据轿车变速器的设计要求和车辆动力传动系统自身的特点，参考多篇文献资料，以及变速器设计图册，设计出中间轴式变速器。
关键词：变速器；齿轮；轴；设计；计算机辅助设计ABSTRACTAutomobile as a means of transport of human life plays an increasingly important role. Transmission is the main power train components. It is used to change the engine's torque spread and wheel speed. Aim is to work in a variety of conditions，different vehicle traction and speed，so that the car has good power and fuel economy。
The transmission is designed based on engine parameters and vehicle parameters of Dongfeng Yuedaqiya 2.0L Shipao automobile in this text. The main design contents include the layout program of transmission drive-mechanism, the selection of main transmission parameters such as shifts, the range of gear ratio, center-spacing, each gear ratio, gear parameters and the numble of each gear, the design and verification of gears and shafts, the design of synchronizer, manipulation-framework and gearbox. Bases on the design requirement and the characteristic of power transmission system, consulting a great deal of literatures and transmission design drafts, a kind of three-shafted transmission is designed.Key words: Transmission；Gear；Shaft；Design；Computer Aided Design目录摘要 (Ⅰ)Abstract (Ⅱ)第1章绪论 (1)1.1 课题研究的现状 (1)1.2 课题研究的目的和意义 (2)1.3设计完成的主要内容 (3)1.4车型基本参数 (3)第2章变速器传动机构布置方案 (5)2.1 传动机构布置方案分析 (5)2.1.1两轴式和中间轴式变速器 (5)2.1.2倒档的形式和布置方案 (5)2.2 零、部件布置方案分析 (7)2.2.1齿轮形式 (7)2.2.2换档的结构形式 (7)2.2.3变速器轴承 (7)2.3本章小结 (8)第 3 章变速器主要参数的选择及设计计算 (9)3.1变速器的档位数，传动比和中心距的确定 (9)3.1.1档数 (9)3.1.2传动比范围 (9)3.1.3确定最低档传动比 (9)3.1.4初步确定其他各档传动比 (11)3.1.5初选中心矩 (11)3.2齿轮参数的确定 (12)3.2.1齿轮的模数 (12)3.2.2压力角α (13)3.2.3螺旋角β (14)3.2.4齿宽 (14)3.2.5 齿轮的变位系数的选择原则 (15)3.2.6齿顶高系数 (16)3.2.7 各档传动比及其齿轮齿数的确定 (16)3.2.8变速器齿轮的几何尺寸计算 (21)3.3本章小结 (29)第4章变速器主要结构元件的设计与计算 (30)4.1 齿轮损坏的原因及形式 (30)4.2 轮齿强度计算 (31)4.2.1轮齿弯曲强度计算 (31)4.2.2轮齿接触应力计算 (35)4.3 变速器齿轮材料的选择及热处理 (39)4.4轴的设计计算 (40)4.4.1初选轴的直径 (40)4.4.2轴的刚度验算 (41)4.4.3轴的强度计算 (48)4.5本章小结 (53)第5章同步器的选择 (54)5.1 惯性式同步器 (54)5.1.1锁环式同步器的结构 (54)5.1.2锁环式同步器的工作原理 (55)5.1.3锁环式同步器主要尺寸的确定 (55)5.2主要参数的确定 (56)5.2.1摩擦因数f (56)5.2.2同步环主要尺寸的确定 (57)5.2.3锁止角β (58)5.2.4同步时间 (58)5.2.5转动惯量的计算 (58)5.3本章小结 (59)第6章变速器操纵机构的选择和箱体设计原则 (60)6.1变速器操纵机构的选择 (60)6.2变速器箱体设计原则 (60)6.3本章小结 (61)第7章变速器齿轮和轴的建模 (62)7.1齿轮建模 (62)7.2轴的建模 (64)7.3本章小结 (65)结论 (66)参考文献 (67)致谢 (68)附录 (69)附录A 英语科技文献 (69)附录B 文献翻译 (73)第1章绪论1.1课题研究的现状汽车变速器是汽车的重要部件之一，用来改变发动机传到驱动轮上的转矩和转速，目的是在原地起步、爬坡、转弯、加速等各种行使工况下，使汽车获得不同的牵引力和速度，同时使发动机在最有利的工况范围内工作。
上汽大众TiguanX使用维护说明书
本说明书适用于下列表中各种型号的上汽大众TiguanX多用途乘用车。
用户在使用本公司产品以前，必须认真研读产品使用维护说明书，任何不当的使用、保养和修理都可能导致车辆的损坏及影响质量担保服务。
因此，在使用产品前请认真阅读本使用维护说明书，并对照表中的型号确认您的车型。
名称型号发动机变速箱上汽大众TiguanX多用途乘用车SVW6474PVD DPL七挡自动变速器上汽大众TiguanX多用途乘用车SVW6474QVD DPL七挡自动变速器上汽大众TiguanX多用途乘用车SVW6474RVD DKX七挡自动变速器本使用维护说明书描述了该车型车辆在当前范围的配置、功能及操作的一般通用信息，但用户车辆的实际配置和功能等信息以具体交付时的为准。
本公司将持续对各种车型进行改进，各车型在外形、配置、功能和结构设计等方面也可能随时会发生变化，故本公司有权在法律法规允许的范围内对本说明书有关版本进行更改、补充，若用户对此有疑义请及时拨打上汽大众客户服务热线400-820-1111予以咨询。
未经本公司书面同意，不得复制、翻译或摘录本使用维护说明书。
上汽大众汽车有限公司依法保留对本说明书有关版本进行更改、补充等的一切权利。
中国印刷。
上汽大众汽车有限公司公司地址：中国上海安亭于田路邮政编码：201805企业标准号：Q/JQAB 338-2020致尊敬的用户尊敬的用户：感谢您对上汽大众的信任与厚爱！在您选择了上汽大众产品的同时，您已经启动了全新的汽车生活之旅。
在整个旅行过程中，上汽大众和旗下1000余家大众品牌特许销售商/特约维修站都将始终陪伴您左右。
衷心希望您的每一天行车生活，都因有上汽大众的同行而更精彩！如果您对车辆使用有任何疑问，上汽大众经销商随时随地为您提供帮助，我们的上汽大众客户服务中心全国统一寻呼400-820-1111也将是您的坚强后盾。
2005年10月18日，上汽大众正式发布了“Techcare”服务品牌。
Honda 车辆维护和保养指南说明书
Care and MaintenanceThis section explains why it is important to keep your vehicle well maintained and to follow basic maintenance safety precautions.This section also includes Maintenance Schedules fornormal driving and severe driving conditions, a Maintenance Record, and instructions for simple maintenance tasks you may want to take care of yourself.If you have the skills and tools required to perform morecomplex maintenance tasks on your Honda, you may want to purchase the Service Manual. See page 221 for information on how to obtain a copy, or see your Honda dealer.Service Station Information . 163Fuel Fill Cap .......... 163Fuel Recommendation ... 164Fuel Tank Capacity ..... 164Engine OilRecommendation ...... 164Windshield Washer ..... 164Tire Inflation Pressures . . 164Battery ............... 164Hood Release .......... 165Engine Oil Dipstick ..... 166Fuel Requirements ........ 166Oxygenated Fuels ...... 166Maintenance Safety ....... 167Important SafetyPrecautions .......... 168Maintenance Schedule ..... 169Maintenance Record ...... 172Owner Safety Checks ...... 174Engine Oil and Filter ...... 177Proper Quality Oil (177)Change Interval ........ 177Oil Change ........... 178Oil Filter Installation . 178Oil Viscosity .......... 179Oil Level Check ....... 179Engine Oil Additives ... 180Air Cleaner Filter ........ 181Manual Transmission Fluid 181MUA Model .......... 181BW Model ........... 182Automatic TransmissionFluid .................. 183Front (4WD) andRear Axles ............. 183Engine Cooling System ... 184Other Required Maintenance 186Brake Master Cylinder .. 186Shift-on-the-Fly System . 187Front Wheel Bearings ... 187Hood Latch and Hinges . 187Air Conditioning . (188)Care and MaintenanceBody Lubrication ...... 188Front (4WD Only) andRear Propeller Shaft ... 188Exhaust System ....... 189Fuel Line and FuelTank/Cap ............ 189Drive Belt ............ 189Timing Belt ........... 189Valve Clearance(L4-2.6L Engine) ..... 189Spark Plugs ........... 189Ignition Wires ......... 189Clutch ............... 190Fluid or Lubricant Levels 190Power Steering ........ 190Accelerator Pedal Linkage 190Suspension and Steering . 191Wheel Alignment ...... 191Exterior ................ 191Washing Your Vehicle . . 191Polishing and WaxingYour Vehicle (191)Protection of ExteriorBright Metal Parts ..... 192Care of Aluminum Wheels 192Foreign Material Deposits 192Finish Damage ........ 192Corrosion Protection .... 192Sheet Metal Damage .... 193Underbody Maintenance 193Interior ................ 193Basic StepsBefore Cleaning ...... 194Cleaning Fabric ........ 194Cleaning General Soilage or Water Spots FromFabric Trim ........ 194Spot Cleaning FabricWith Solvent Cleaner 195Removal ofSpecific Stains ...... 195Cleaning Vinylor Leather Trim (196)Seat Belt Care ......... 197Cleaning Glass Surfaces . 197Care and Maintenance。
途铠多用途乘用车使用维护说明书
本说明书适用于下列表中各种型号的途铠多用途乘用车。
用户在使用本公司产品以前，必须认真研读产品使用维护说明书，任何不当的使用、保养和修理都可能导致车辆的损坏及影响质量担保服务。
因此，在使用产品前请认真阅读本使用维护说明书，并对照表中的型号确认您的车型。
名称型号发动机变速箱途铠多用途乘用车SVW64010AJ DLS七挡自动变速器途铠多用途乘用车SVW64010BT DJS七挡自动变速器途铠多用途乘用车SVW64010CL DMB五挡手动变速器途铠多用途乘用车SVW64010DL DMB六挡自动变速器本使用维护说明书描述了该车型车辆在当前范围的配置、功能及操作的一般通用信息，但用户车辆的实际配置和功能等信息以具体交付时的为准。
本公司将持续对各种车型进行改进，各车型在外形、配置、功能和结构设计等方面也可能随时会发生变化，故本公司有权在法律法规允许的范围内对本说明书有关版本进行更改、补充，若用户对此有疑义请及时拨打上汽大众客户服务热线400-820-1111予以咨询。
未经本公司书面同意，不得复制、翻译或摘录本使用维护说明书。
上汽大众汽车有限公司依法保留对本说明书有关版本进行更改、补充等的一切权利。
中国印刷。
上汽大众汽车有限公司公司地址：中国上海安亭于田路邮政编码：201805企业标准号：Q/JQAB 325-2020Q/JQAB 326-2020致尊敬的用户尊敬的用户：感谢您对上汽大众的信任与厚爱！在您选择了上汽大众产品的同时，您已经启动了全新的汽车生活之旅。
在整个旅行过程中，上汽大众和旗下1000余家大众品牌特许销售商/特约维修站都将始终陪伴您左右。
衷心希望您的每一天行车生活，都因有上汽大众的同行而更精彩！如果您对车辆使用有任何疑问，上汽大众经销商随时随地为您提供帮助，我们的上汽大众客户服务中心全国统一寻呼400-820-1111也将是您的坚强后盾。
2005年10月18日，上汽大众正式发布了“Techcare”服务品牌。
2019款智跑使用说明
2019款智跑使用说明一、车辆概述2019款智跑是韩国现代汽车公司推出的一款小型SUV。
它拥有时尚的外观设计、舒适的内部空间以及出色的操控性能，深受消费者的喜爱。
本文将为您详细介绍2019款智跑的使用说明，帮助您更好地了解和使用这款车型。
二、车内功能1. 座椅调节：2019款智跑配备了多向调节的座椅，可以根据个人需求进行前后、上下和靠背角度的调整，以获得更舒适的坐姿。
2. 空调系统：智跑采用了独立双区域自动空调系统，可以根据驾驶员和乘客的需求，分别调节温度和风量，提供舒适的驾乘体验。
3. 娱乐系统：车内配备了音响系统和触控屏幕，可以通过连接蓝牙或USB接口播放音乐，还可通过触控屏幕控制导航、电话等功能。
4. 安全系统：智跑配备了多项主动和被动安全系统，如ABS防抱死制动系统、EBD电子制动力分配系统、ESP车身稳定控制系统等，提供全方位的安全保障。
三、驾驶操作1. 启动车辆：将钥匙插入点火开关，并轻轻旋转，即可启动发动机。
在起步前，确保挂入空档并松开手刹，然后踩下刹车踏板。
2. 换挡操作：智跑配备了手动和自动两种变速器，手动变速器需通过离合器踏板来换挡，而自动变速器则可通过换挡杆或拨片换挡。
3. 加油操作：打开油箱盖，将加油枪插入油箱口，按住加油枪开关，直到加满油箱或达到所需油量后，松开开关并取出加油枪。
4. 停车操作：停车时，先松开油门，踩下刹车踏板，将换挡杆置于P档（自动变速器）或空档（手动变速器），然后拉起手刹。
四、行车安全提示1. 系好安全带：在行车过程中，驾驶员和乘客都应系好安全带，确保乘车安全。
2. 观察车距：在行车中，应保持与前车的安全距离，以便能够及时刹车或采取其他措施。
3. 遵守交通规则：在道路上行驶时，应遵守交通规则，不超速、不闯红灯，确保自身和他人的安全。
4. 注意疲劳驾驶：长时间驾驶容易导致疲劳，应及时休息或交替驾驶，确保驾驶安全。
五、日常维护保养1. 定期保养：按照车辆使用手册的要求，定期对车辆进行保养，包括更换机油、机滤、空滤等，以确保车辆的正常运行。
CARNIVAL起亚嘉华2.5L面板说明
面板说明
一、CARNIV AL起亚嘉华2.5L
说明与操作
空调系统
这种空调系统是由驾驶员控制开关完成制冷、取暖和鼓风机控制，仪表架底部有取暖用水箱，取暖和制冷都必须用一个鼓风机。
空调部件在发动机舱的有压缩制冷剂的空调泵、制冷剂流动所使用的管道、干燥和除杂质用的干燥器。
鼓风机的风速由四个挡位组成。
控制内、外循环的风门，整个过程都由开关控制。
由风门控制制冷或取暖时的不同温度来调节室内温度使用驾驶员的感觉。
（1）后鼓风机开关
（2）前鼓风机开关
（3）冷暖风控制
（4）循环风控制
（5）空调开关
（6）内循环风控制开关
（7）外循环风控制开关
1。
Acura车辆维护和保养指南说明书
Care and MaintenanceThis section explains why it is important to keep your vehicle well maintained and to follow basic maintenance safety precautions.This section also includes Maintenance Schedules fornormal driving and severe driving conditions, a Maintenance Record, and instructions for simple maintenance tasks you may want to take care of yourself.If you have the skills and tools required to perform morecomplex maintenance tasks on your Acura, you may want to purchase the Service Manual. See page 220 for information on how to obtain a copy, or see your Acura dealer.Service Station Information . 167Fuel Fill Cap .......... 167Fuel Recommendation . . 168Fuel Tank Capacity ..... 168Engine OilRecommendation ...... 168Windshield Washer ..... 168Tire Inflation Pressures .. 168Battery ............... 168Hood Release .......... 169Engine Oil Dipstick ..... 170Fuel Requirements ........ 170Oxygenated Fuels ...... 170Maintenance Safety ....... 171Important SafetyPrecautions .......... 172Maintenance Schedule ..... 173Maintenance Record ...... 176Owner Safety Checks (178)Engine Oil and Filter ...... 181Proper Quality Oil ...... 181Change Interval ........ 181Oil Change ........... 182Oil Filter Installation . 182Oil Viscosity .......... 182Oil Level Check ....... 183Engine Oil Additives ... 184Air Cleaner Filter ........ 184Automatic TransmissionFluid .................. 185Front and Rear Axles ..... 186Engine Cooling System ... 186Other Required Maintenance 189Brake Master Cylinder .. 189Shift-on-the-Fly System . 189Front Wheel Bearings ... 190Hood Latch and Hinges . 190Air Conditioning ....... 190Body Lubrication (190)Care and MaintenanceFront and RearPropeller Shaft ....... 191Exhaust System ....... 191Fuel Line and FuelTank/Cap ............ 191Drive Belt ............ 191Timing Belt ........... 192Spark Plugs ........... 192Fluid or Lubricant Levels 192Power Steering ........ 192Accelerator Pedal Linkage 192Wheel Alignment ...... 192Front License PlateInstallation .......... 193Exterior ................ 193Washing Your Vehicle .. 193Polishing and WaxingYour Vehicle ......... 193Protection of ExteriorBright Metal Parts ..... 194Care of Aluminum Wheels 194Foreign Material Deposits 194Finish Damage ........ 194Corrosion Protection .... 194Sheet Metal Damage .... 195Underbody Maintenance 195Interior ................ 195Basic Steps BeforeCleaning ............ 196Cleaning Fabric ........ 196Cleaning GeneralSoilage or Water SpotsFrom Fabric Trim ... 196Spot Cleaning FabricWith Solvent Cleaner 197Removal of SpecificStains ............. 197Cleaning Vinyl orLeather Trim ......... 198Seat Belt Care ......... 199Cleaning Glass Surfaces . 199Care and Maintenance。
赛拉图使用说明书
备注
质量担保期 从销售开票
之日起计
备件保修保修期限：
备件保修
1年或2万公里（以先到达者为准） (B类件保修：3个月5千公里)
保修期从备件在东风悦达 起亚汽车服务店更换之日起
保修范围
不属于保修的范围： 1、用户没按规定进行新车首次保养及以后的各次例行保养。 2、用户自行修理或到东风悦达起亚服务店以外的厂家修理后所发生的质量问题。 3、因用户使用不当或保养维修不当造成的质量问题。 4、进行了没有经过东风悦达起亚认可的任何汽车改装。 5、由于外部原因造成汽车损坏，特别是细砾石的溅击或碰撞所致的损坏，大气中
件 差速器、油泵、变扭器、阀体、制动器、离合器
A类：高压线、蓄电池、减震器、倒车镜、继电器、传感 特 器、喇叭、橡胶件、开关、音响、灯具、油漆、玻璃、天 殊线
1年或2万公里 (以先达到者为准)
件 B类：各类滤芯、保险丝、火花塞、灯泡、离合器片、雨 3个月或5千公里
刮片、轮胎、制动蹄片
(以先达到者为准)
次，每次
• 4.轮胎气压：千里马和RIO
公斤，赛拉图和远
舰
，嘉华
；
• 5.空调滤芯 更换
清洁火更换，
KM 必须
• 6.影响轮胎寿命的因素？
影响： 风量比以前小或在外循环模式时车内容易起雾，且 车内有异味等，请及时更换空调滤清器。
更换、维护要求： 1、每7500km清洁或更换；15000km更换。 2、经常清洁有利于使空调系统保持良好工作状态。
▣ 轮胎使用与维护
影响轮胎寿命的因素 1、轮胎气压 2、轮胎所承受的载荷 3、车辆行驶的道路、气候条件 4、驾驶习惯 5、行驶速度与磨损量的关系
◆什么原因造成轮胎出现异常磨损?
Honda 汽车维护指南说明书
Service Station Procedures 4. Remove the dipstick again and check the level. It should be between the upper and lower marks.If it is near or below the lower mark,see Adding Oil on page 167 .Engine Coolant Check Look at the coolant level in the radiator reserve tank. Make sure it is between the MAX and MIN lines. If it is below the MIN line, see Adding Engine Coolant on page 171 for information on adding the proper coolant.Refer to Owner Maintenance Checks on page 165 for information on checking other items in your Honda.Before DrivingUPPER MARKLOWER MARKMAX MIN RESERVETANKFuel EconomyThe condition of your car and your driving habits are the two most important things that affect the fuel mileage you get.Vehicle Condition Always maintain your car according to the maintenance schedule. This will keep it in top operating condition.An important part of that mainte-nance is the Owner Maintenance Checks (see page 165 ). For example, an underinflated tire causes more "rolling resistance,"which uses fuel. It also wears out faster, so check the tire pressure at least monthly.Engine oil also affects fuel economy.The fuel efficient, low-viscosity OW-20 oil recommended for your Insight is formulated to help the engine use less fuel. This oil is available at your Honda dealer.In winter, the build-up of snow on your car's underside adds weight and rolling resistance. Frequent cleaning helps your fuel mileage and reduces the chance of corrosion.Driving Habits You can improve fuel economy by driving moderately. Rapid acceler-ation, abrupt cornering, and hard braking use more fuel.To get the best fuel mileage, drive in the highest gear that is practical for the speed you are driving, and always accelerate slowly.You may find that your Insight's unique combination of an engine and an electric motor has driving characteristics that are somewhat different from what you are used to.Shift Up and Shift Down indicators (5-speed manual transmission only)on the instrument panel show when to shift to a higher or lower gear. By shifting as soon as the indicator comes on, you will keep the engine operating in its most economical range.Depending on traffic conditions, try to maintain a constant speed. Every time you slow down and speed up,your car uses extra fuel.Wind resistance causes vehicles to use more fuel at higher speeds.Driving at moderate speeds on the highway reduces wind resistance and conserves fuel.Before DrivingFuel EconomyA cold engine uses more fuel than a warm engine. It is not necessary to "warm-up" a cold engine by letting it idle for a long time. You can drive away in about a minute, no matter how cold it is outside. The engine will warm up faster, and you get better fuel economy. To cut down on the number of "cold starts," try to combine several short trips into one.The air conditioning puts an extra load on the engine which makes it use more fuel. Turn off the A/C to cut down on air conditioning e the flow-through ventilation when the outside air temperature is moderate.If air conditioning is needed, you can save some fuel by using the A/C in "Econ" mode. When the outside temperature is above 41°F (5°C),this mode allows the Auto Idle Stop function to shut off the engine when the vehicle is stopped, resulting in fuel savings.You may notice that using the A/C causes a greater drop in fuel economy than you are used to in other vehicles. Although the amount of extra fuel used by the A/C load on the engine is no greater than other vehicles, it is more noticeable because of your Insight's excellent fuel mileage. Using the A/C in hot weather may result in fuel economy that is lower than expected.Before Driving。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
。
-可编辑修改-
我们希望您能在驾驶中获得最大的乐趣，本车主手册可以在很多方面向您提供帮助。因此我
们强烈建议您务必详细阅读本手册全部内容，尤其要认真阅读手册中的所有警告及注意事
项，以最小化伤亡机率。
本手册中文字配合图片的补助说明有助于您更好的了解您的车辆，通读本手册，了解车辆的
特性、重要安全信息及不同路况下的驾驶要领。
在目录中，您可以看到整本手册的相关章节分配，您可以从中找到需要的资料。
章：本手册由八个章节加一个索引组成，每章开始时都附有简单的目录，便于您查找所需要
的内容。
您会在本手册中看到很多警告、注意及参考标志。这些标志有助于提高人身及车辆安全。请
认真阅读并遵守这些警告、注意及参考标志中提到的内容。
。
-可编辑修改-
与这种车型的其它汽车一样，汽车操作不正确可能导致车辆失控、发生意外事故及翻车。
特殊的设计特性(较高离地间隙及轮距等)使本车辆相对于其它车型而言重心较高。换句话
说，本车型的设计使它不能以与传统2轮驱动车辆同样的速度转弯。要避免急转弯或突然
动作。再次强调，汽车操作不正确可能导致车辆失控、发生意外事故或翻车。因此，请务必
详细阅读本说明书第五章的“铺砌路面驾驶”与“野外驾驶”指南。
并不需要专门“磨合”。但在最初的1,000公里内遵守下述建议，有利于车辆的性能发挥、经
济运行并能延长使用寿命。
1 不要使发动机高速空转。
2 不论车速快慢都不要维持同一车速太久。处于磨合期的车辆，最好能经历各种发动机转
速，以便充分磨合发动机。
3 除非是紧急情况，否则请尽量避免紧急制动，让制动装置正常地起作用。
4 避免节气门全开起动。
。
-可编辑修改-
1．车门闭锁／开锁按钮
2．电动门窗开关
3．室外后视镜控制开关(如有配备)
4．发动机盖释放杆
5．仪表盘照明(如有配备)
6．牵引力控制系统(如有配备)
7．4WD LOCK按钮(如有配备)
8．方向盘倾斜
9．制动踏板
。
-可编辑修改-
10．加速踏板
11．座椅
12．驻车制动杆
13．燃油加油口门释放杆
1．驾驶席安全气囊(如有配备)
2．灯光控制／转向信号
3．仪表盘
4．雨刮器／喷水器
5．点火开关
6．方向盘
。
-可编辑修改-
7．数字钟
8．危险警告灯
9．音响控制器(如有配备)
10．空调控制器(如有配备)
11．助手席安全气囊(如有配备)
12．通风口控制
13．杂物箱
14．烟灰缸
15．点烟器
16．变速杆
17．后雾灯(如有配备)
CVVT持续可变气门正时系统(如有配备)
。
-可编辑修改-
一、功能说明
降低燃油消耗量
因为增加了气门重叠度而减少泵送损失。
。
-可编辑修改-
降低排气：
因为优化了气门重叠度而通过ERG效应减少NOx。
低速时改善性能并增加扭矩：
通过可变气门正时提高容积效率和热力效率。
二、注意事项
1、对CVVT阀体拆卸维修后可能导致发动机工作不良，阀体总成发生故障维修只能更换总
成的方式进行。
2、使用粘度较高机油(15W40以上)时，发动机在低温状态下CVVT有可能不工作。建议您
使用粘度在10W30以下的机油。
3、CVVT阀体与OCV电磁阀内部精密度较高，使用非正厂机油、机滤易导致发动机CVVT
系统工作异常
钥匙号码印在钥匙组的号码牌上。
。
-可编辑修改-
如果遗失钥匙，这组号码便于授权的东风悦达起亚服务店复制钥匙。
拆卸号码牌并存放在安全的地方。
同时记下号码并将其放在安全便利的地方，不要放在车内。
钥匙操作
①主钥匙
用于起动发动机，开锁和闭锁车门、开锁和闭锁杂物箱。
②遥控器(如有配备)
用于开锁和闭锁车门。
>$@点火开关钥匙
单独将儿童及点火开关钥匙留在车内是非常危险的，即使点火开关钥匙不在点火开关内。儿
童可能会模仿大人的动作将点火开关钥匙插入点火开关，并操作电动门窗及其它控制装置甚
至使车辆移动，从而可能造成严重的人身伤害甚至导致死亡。千万不要把钥匙及无人照顾的
儿童留在车内。>$@
>$@本车辆仅能使用东风悦达起亚原厂的点火开关田匙。如果使用零件市场出售的钥匙，