DF9-40柔性薄膜压力传感器规格书
First Sensor MLH系列金属压力传感器产品说明书
MLH SeriesAll Metal Pressure SensorsDESCRIPTIONMLH Series pressure sensors combine Application Specific Integrated Circuit (ASIC) technology with a media isolated, metal diaphragm design. This digitally compensated sensor offers value and performance, making it the ideal pressure sensing solution for demanding applications. Fully temperature compensated, calibrated and amplified, the MLH is available in 50 psi to 8,000 psi pressure ranges.MLH sensors deliver ±0.25% full scale accuracy Best Fit Straight Line (BFSL) and as low as 2% total error over a temperature range of -40 °C to 125 °C [-40 °F to 257 °F]. Industry standard connectors and process ports are offered for enhanced reliability and user flexibility.The MLH has seven standard output options:A. 0.5 Vdc to 4.5 Vdc ratiometric output from 5 Vdc excitationB. 4 mA to 20 mA current from 9.5 Vdc to 30 Vdc excitationC. 1.0 Vdc to 6.0 Vdc regulated output from 8 Vdc to30 Vdc excitationD. 0.25 Vdc to 10.25 Vdc regulated output from 14 Vdc to30 Vdc excitationE. 0.5 Vdc to 4.5 Vdc regulated output from 7 Vdc to30 Vdc excitationF. 0 mV to 50 mV from 5 Vdc excitationG. 1 Vdc to 5 Vdc output from 8 Vdc to 30 Vdc excitationFEATURES• All metal wetted parts for use in wide variety of fluidapplications• No internal elastomeric seals mean no o-ring compatibilityissues• Amplified outputs eliminate cost of external amplifiers • Input reverse voltage and output short circuit protectionsguard against mis-wiring• Less than 2 ms response time provides accurate, highspeed measurement• Rated IP65 or better for protection from harsh environmentsPOTENTIAL APPLICATIONS • Compressors• Refrigeration and HVAC/R • General industrial • General hydraulics• Multiple transportation applications including braking andalternate fuels • MedicalMLH Series2 /sensingTable 1. Pressure Range Specifications 1(At 25 °C [77 °F] and at rated excitation unless otherwise specified.)psiPressure 50 100 150 200 250 300 500 1000 2000 3000 5000 8000 Proof pressure 150 300 450 600 750 900 1500 2000 4000 6000 7500 12000 Burst pressure 500 1000 1500 2000 2500 3000 5000 10000 20000 30000 30000 30000barPressure 6 10 16 25 40 60 100 160 250 350 500 550 Proof pressure 18 30 48 75 80 120 200 320 500 700 750 825 Burst pressure60 100 160 250 400 600 1000 1600 2068 2068 2068 2068Note:1. Comparable metric units follow same proof and burst specifications.Table 2. Physical and Environmental SpecificationsParameter Characteristic Material in contact with media stainless steel 300 series and Haynes 214 alloy, Hastelloy C22 sensor available (contact factory) Housing material black plastic – Amodel AS-4133 HS – PPA Weight 57.0 g [2.0 oz] (typical for Packard MetriPak and 1/8 NPT port) Shock 100 g peak [11 ms] Vibration MIL-STD-810C, Figure 514.2-5, Curve AK, Table 514.2-V, Random Vibration Test [overall g rms =20.7 min.]Compensated, operating and storage temperature range-40 °C to 125 °C [-40 °F to 257 °F]Table 3. Electrical Specifications (At 25 °C [77 °F] and at rated excitation unless otherwise specified.) Parameter Ratiometric(A)1 Current (B) Regulated(C) Regulated(D) Regulated(E) mV (F) Regulated(G) Zero output 0.5 Vdc4.0 mA1.0 Vdc0.25 Vdc0.5 Vdc0 ±2.5 mV1.0 VdcFull scale span (FSS) 4.0 Vdc (0.5 to 4.5 Vdc) 16 mA (4 to 20 mA) 5.0 Vdc (1.0 to 6.0 Vdc) 10.0 Vdc (0.25 to 10.25 Vdc) 4.0 Vdc (0.5 to4.5 Vdc) 50 mV (0 to 50 mV) 4.0 Vdc (1.0 to 5.0 Vdc)Excitation 5 Vdc (6.0 Vdc max.) 9.5 Vdc to 30.0 Vdc 8.0 Vdc to 30.0 Vdc 14.0 Vdc to 30.0 Vdc 7.0 Vdc to 30.0 Vdc5.0 Vdc (6.0 Vdc max.)8.0 Vdc to 30.0 VdcSupply current 4.0 mA typical (8 mA max.)N/A 5.0 mA typical (17 mA max.)5.0 mA typical (17 mA max.)5.0 mA typical (17 mA max.) 8.0 mA typical (17 mA max.) 5.0 mA typical (17 mA max.)Source (nominal) 1.0 mA N/A 1.0 mA 1.0 mA 1.0 mA N/A 1.0 mA Sink(nominal) 1.0 mA at zero outputN/A 1.0 mA at zero output1.0 mA at zero output1.0 mA at zero outputN/A 1.0 mA at zero outputSupplyrejection ratio 90 db 90 db 90 db 90 db 90 db N/A90 dbOutput impedance25 Ω max.N/A25 Ω max.25 Ω max.25 Ω max.2000 Ω 25 Ω max.Note:1. Maintains ratiometricity at 5 ±0.25 Vdc excitation. Product can tolerate 6 Vdc excitation without damage.All Metal Pressure SensorsHoneywell Sensing and Control 3Table 4. Performance Specifications (At 25 °C [77 °F] and at rated excitation unless otherwise specified.)Parameter Characteristic Response time <2 msAccuracy 1:>100 psi<100 psi±0.25% FSS ±0.50% FSS Total error band 2:Gage:<300 psig>300 psigSeal gage:>300 psisSeal gage without L, M, P termination:100 psis to 299 psis (-40 °C to 85 °C [-40 °F to 185 °F])100 psis to 299 psis (>85 °C to 125 °C [>185 °F to 257 °F])>300 psis (-40 °C to 125 °C [-40 °F to 257 °F])Seal gage with L, M, P termination:100 psis to 299 psis (-40 °C to 65 °C [-40 °F to 149 °F])100 psis to 299 psis (>65 °C to 125 °C [>149 °F to 257 °F])>300 psis (-40 °C to 65 °C [-40 °F to 149 °F])>300 psis (>65 °C to 125 °C [>149 °F to 257 °F])±3% FSS ±2% FSS ±2% FSS ±3% FSS ±10% FSS ±2% FSS ±10% FSS ±15% FSS ±5% FSS ±15% FSS Notes:1. Includes pressure non-linearity (BFSL), pressure hysteresis and non-repeatability. Thermal errors are not included.2. Includes zero error, span error, thermal effect on zero, thermal effect on span, thermal hysteresis, pressure-non-linearity,pressure hysteresis and non-repeatability.1Sensing and Control Honeywell1985 Douglas Drive North Golden Valley, MN 55422 /sensing 008118-5-EN IL50 GLO Printed in USAJanuary 2009Copyright © 2009. Honeywell International Inc. All rights reserved.Figure 2. Mounting Dimensions (For reference only. mm/(in).)Pin and Wire Codes (Option B – Packard)Pin Voltage Current a + Excitation + Excitation b Output - Excitation c Common No ConnectionA variety of pressure ports and electricaltermination connection options are available. Refer to the “How to Order” on previous page for possible combinations. Contact your Honeywell representative for details.WARNINGMISUSE OF DOCUMENTATION• The information presented in this product sheet is forreference only. Do not use this document as a product installation guide.• Complete installation, operation, and maintenanceinformation is provided in the instructions supplied with each product.Failure to comply with these instructions could result in death or serious injury.WARRANTY/REMEDYHoneywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Honeywell’s standard product warranty applies unless agreed to otherwise by Honeywell in writing; please refer to your order acknowledgement or consult your local sales office for specific warranty details. If warranted goods are returned to Honeywell during the period of coverage, Honeywell will repair or replace, at its option, without charge those items it finds defective. Theforegoing is buyer’s sole remedy and is in lieu of all other warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall Honeywell be liable for consequential, special, or indirect damages.While we provide application assistance personally,through our literature and the Honeywell web site, it is up to the customer to determine the suitability of the product in the application.Specifications may change without notice. Theinformation we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use.WARNINGPERSONAL INJURYDO NOT USE these products as safety or emergency stop devices or in any other application where failure of the product could result in personal injury.Failure to comply with these instructions could result in death or serious injury.SALES AND SERVICEHoneywell serves its customers through a worldwide network of sales offices, representatives and distributors. For application assistance, current specifications, pricing or name of the nearest Authorized Distributor, contact your local sales office or:E-mail:*********************Internet: /sensingPhone and Fax: Asia Pacific +65 6355-2828 +65 6445-3033 Fax Europe +44 (0) 1698 481481 +44 (0) 1698 481676 Fax Latin America +1-305-805-8188 +1-305-883-8257 F ax USA/Canada +1-800-537-6945 +1-815-235-6847 +1-815-235-6545 F ax。
压力传感器说明书
GPD3压力传感器使用说明书煤炭科学研究总院沈阳研究院2010年5月第1版GPD3压力传感器使用说明书1、概述1.1产品特点本传感器采用精密压力敏感元件，可实现自动温度补偿，可以避免因温度变化引起的测量误差。
为尽量避免由外围元器件漂移引起的误差，所以采用很少的外围处理电路。
传感器结构简单，功能强大。
可以测量正压、负压、及压差。
1.2用途及适用范围1.2.1用于测量煤矿井下通风巷道压力。
1.2.2瓦斯抽放管道等有甲烷和煤尘爆炸危险环境的压力。
1.3型号含义1.4使用环境条件工作环境应避免淋水。
1.5工作条件1.5.1环境温度：0～40℃1.5.2相对湿度：≤98%(25℃时) 1.5.3大气压力：80～110 kPa2、安全特征2.1本传感器为矿用本质安全型。
2.2防爆标志为：Exib Ⅰ。
2、结构及工作原理图1：GY3压力传感器外型示意图G P D 3主参数：测量范围0~3.0kPa 主参数：测量范围 产品特征代号：压力差式 产品类别代号：传感器3、技术特征3.1测量范围：0～3.00kPa3.2供电电源：12～21VDC3.3电流：≤70mA3.4供电距离：1500m(电缆截面为0.43m㎡)3.5输出频率信号：200～1000Hz (负载≤600Ω)4、尺寸及重量4.1仪器外型尺寸(mm)：210×130×554.2重量(kg)：25、安装、调试5.1、本传感器可挂在煤矿井下需要检测压力的地方，使用时垂直悬挂。
5.2、传感器连接电缆，电缆选用四芯型矿用阻燃电缆，传感器三根引出线接法为：5.3、测量负压时，接右侧，测量取压管可选用PU管或橡胶管；当有一个取压嘴时，既可以测量正压，也可以测量负压。
注意：（1）安装取压管时，不得使传感器取压嘴的压力，超过传感器测量最大值的3倍。
（2）当有两个取压嘴时，不得用负压嘴测量正压。
5.4、电缆取压管连接无误后，给传感器送电，10秒后传感器进入稳定测量，显示所测压力的数值。
电应普超声波传感器 规格书
电应普超声波传感器规格书全文共四篇示例，供读者参考第一篇示例：电应普超声波传感器规格书一、产品概述电应普超声波传感器是一种先进的传感器，通过发射和接收超声波来测量物体与传感器之间的距离。
它具有高精度、高稳定性和高可靠性的特点，广泛应用于工业自动化、智能家居、智能车载等领域。
二、技术参数1. 工作频率：40kHz2. 测量范围：0.2m-5m3. 分辨率：1mm4. 工作温度：-20℃~70℃5. 输出方式：模拟电压信号/数字信号6. 工作电压：5V7. 防护等级：IP678. 重复性误差：±1mm9. 防干扰能力：工业级10. 尺寸：Φ16mm*75mm三、产品特点1. 高精度：采用先进的超声波技术，测量精度高达1mm，满足各种精密测量需求。
2. 高稳定性：具有优异的稳定性，工作过程中不受外界干扰影响，保证测量结果准确可靠。
3. 高可靠性：采用优质材料和先进工艺制造，具有长期稳定的性能和使用寿命。
4. 多种输出方式：可选模拟电压信号输出或数字信号输出，适用于不同的应用场景。
5. 强大的防干扰能力：具有工业级防干扰能力，可在复杂的电磁环境下稳定工作。
6. 小巧的尺寸：体积小巧，安装方便，适用于各种空间有限的场合。
四、应用领域电应普超声波传感器广泛应用于以下领域：1. 工业自动化：用于机器人、流水线等设备的距离测量和障碍检测。
2. 智能家居：用于智能门锁、智能照明等设备的距离控制和智能化操作。
3. 智能车载：用于车载倒车雷达、车位检测等系统的距离测量和安全预警。
4. 仓储物流：用于货架高度检测、自动导航车的导航等应用。
第二篇示例：电应普超声波传感器规格书一、产品概述电应普超声波传感器是一种广泛应用于测距、检测和定位的传感器，它利用声音的反射原理来实现测距和探测物体的目的。
本传感器具有高精度、快速响应、稳定性好等特点，能够适用于各种工业自动化领域。
二、产品特点1. 采用电应普最新一代超声波传感技术，性能稳定可靠。
传感器库存资料- 霍尼韦尔压力传感器型号霍尼韦尔压力传感器1.pdf
霍尼韦尔压力传感器型号霍尼韦尔压力传感器 142PC01D，142PC02D，142PC03D，142PC05D，142PC15D，142PC30D，142PC15A，142PC30A，142PC30G，141PC01D，141PC02D，141PC03D，141PC05D，141PC15D，141PC30D，143PC01D，143PC02D，143PC03D，143PC05D，143PC15D，143PC30D，141PC01G，141PC02G，141PC05G，142PC01G，142PC02G，142PC03G，142PC05G，142PC15G，163PC01D36，163PC01D48，163PC01D75，164PC01D76，163PC01D37，163PC01D76，161PC01D36，162PC01D36，164PC01D36，189PC15GM，189PC100GM，189PC150GM，ASCX01DN，ASCX05DN，ASCX15AN，ASCX15DN，ASCX30AN，ASCX30DN，ASCX100AN，ASCX100DN，ASCX150DN，ASCX150AN，ASDX015A24R，ASDX030A24R，ASDX100A24R，ASDX001G24R，ASDX005G24R，ASDX015G24R，ASDX020G24R，ASDX100G44R，ASDX001D44R，ASDX005D44R，ASDX015D44R，ASDX030D44R，ASDX100D44R,40PC001G2A, 40PC015G2A, 40PC100G2A, 40PC150G2A, 40PC250G2A, 40PC500G2A, 4040 PC001G2A, 4040PC015G2A, 4040PC100G2 A, 4040PC150G2A, 4040PC250G2A, 4040PC500G2A. 微压传感器 CPCL04DC，CPCL10DC，CPCL04DTC，CPCL10DTC，CPXL04DTC，CPXL10DTC，CPXL01DC，CPXL10DC，XPCL04DC，XPCL10DC，XPCL04DTC，XPCL10DTC，XPX50D，XPXL04DC，XPXL10DC，XPXL04DTC，XPXL10DTC，XSXL04D，XSXL10D，XSCL04DC，XSCL10DC，SDXL005D4，SDXL010D，SLP004D，SLP010D，DCXL01DN，DCXL05DN，DCXL10DN，DCXL20DN，DCXL30DN，DC001NDC4，DC002NDC4，DC005NDC4，DC010NDC4，DC020NDC4，DC030NDC4，DC001NDR4，DC002NDR4，DC005NDR4，DC010NDR4，DC020NDR4，DC030NDR4，DC001NDR5，DC002NDR5，DC005NDR5，DC010NDR5，DC020NDR5，DC030NDR5，DC2R5BDC4，DC005BDC4，DC075BDC4，DUXL01D，DUXL05D，DUXL10D，DUXL20D，DUXL30D。
ifm电子 PN2023 压力传感器显示版说明书
normally open / normally closed; (parameterisable)
2
250
< 500 1
4...20; (scalable 1:4) (Ub - 10 V) / 20 mA
0...10; (scalable 1:4) 2000 yes
pulsed
yes
< ± 0,4; (Turn down 1:1) < ± 0,1; (with temperature fluctuations < 10 K; Turn down 1:1)
< ± 0,25 (BFSL) / < ± 0,5 (LS); (Turn down 1:1; BFSL = Best Fit Straight Line; LS = limit value setting) < ± 0,1; (Turn down 1:1)
discontinued article 1 pcs.
Connection
OUT1 OUT2
switching output switching output analogue output
ifm electronic gmbh • Friedrichstraße 1 • 45128 Essen — We reserve the right to make technical alterations without prior notice. — EN-GB — PN2023-01 — 08.09.2015
IO-Link device ID
Profiles
SIO mode
Required master port type
Process data analogue
CITIZEN 电子 CITISENSOR PR-40-T 光电传感器规格说明书
9. Precautions 9-1. Soldering(1) Manual Soldering1) Solder with silver content is recommended.2) As to CITISENSORs that have absorbed moisture by any chance, baking isrecommended prior or the soldering process to prevent CITISENSORs from the possible crack problem due to the absorbed moisture.3) The use of the soldering iron in less than 25W and the temperature of iron tip must be kept at no higher than 350°C.4) Force or stress must not be applied to the resin portion while soldering. 5) It is requested to solder each land within 3 seconds.6) It is requested that products should be handled after their temperature has dropped down to the normal room temperature.(2) Reflow soldering1) Following soldering paste is recommended Melting temperature: 178 ~ 192°C. Composition: Sn 63 %, Pb 37 %2) The temperature profile at the top surface of the parts is recommended as shown below.3) It is requested that products should be handled after their temperature has dropped down to the normal room temperature.(3) Lead free soldering1) Following soldering paste is recommended Melting temperature: 216 ~ 220°C.Composition: Sn 3.5Ag 0.75Cu2) The temperature profile at the top surface of the parts is recommended as shown below.3) It is requested that products should be handled after their temperature has dropped down to the normal room temperature.Reflow soldering of the above profile is allowed two times.ApprovedCheckedDrawnSymbol CITISENSORNamePR-40140~160°C4°C sec.Max10sec.Max240°C Max More than 1min.T e m p e r a t u r eTime4°C /sec.Max140sec160~180°C4°C /sec.MaxT e m p e r a t u r eTime4°C /sec.Max260°C Max 220°C60~70secReferenceAug.22,2007M.Okuwaki9-2. CleaningPerform the cleaning after soldering strictly in conformity to the following conditions:· Cleaning Agent : Alcohol· Temperature and Time: 30 seconds under the temperature below 50°C or 3 minutes below 30°C.· Ultrasonic Cleaning : 300W or less9-3. Other Precaution1) It is requested to avoid any stress added to the resin portion while heating.2) It is requested to avoid any friction by sharp metal nail etc. to the resin portion. 10. Precautions on Designing1) The Current limiting Resistor should be placed on the circuit to drive within the rating. Also the design should be done to avoid the reverse voltage (over-current) applied instantaneously when turned ON or OFF .2) When the Pulse Driving Current is applied, the average current consumptionshould be within the rating. Also the design should be done to avoid the reverse voltage applied when put off.3) Recommended Soldering Pattern<For Reflow Soldering>The above dimensions are recommended,but the mountability study should be conducted in advance at your site.4) When assembling the circuit board into the finished products, pay attention to avoid the component parts from touching with other parts.ApprovedChecked DrawnSymbol CITISENSORNamePR-40ReferenceAug.22,2007M.Okuwaki0.60.60.60.60.30.375。
微机制成Silicon压力传感器产品说明书
common SPEcIFIcATIonSAccuracy: 0.08% BSL linearity, hysteresis and repeatability combinedminimum Resistance Between Transducer Body and Any Wire: 100 M Ωoperating Temperature:mV/V and 5 to 10 Vdc output: -45 to 121°C (-49 to 250°F) mA output: -45 to 115°C (-49 to 239°F) compensated Temperature Range:10 inH 2o to 5 psi: -17 to 85°C (1 to 185°F) 15 to 1000 psi: -29 to 85°C (-20 to 185°F)Thermal Accuracy: Zero Span % Shift over compensated temperature range mV/V, 0 to 5 or 0 to 10 Vdc, or 4 to 20 ma outputs 0-10 inh 2U P recision micro-machined Silicon core U 5-Point nIST Traceable calibration U H igh Stability, Low Drift U W elded Stainless Steel construction U 316L SS Wetted Parts U Digital Dynamic Thermalcompensation Across Temperature and Pressure Range U P remium Temperature Performance U B road compensated Temperature Range U D urable, 1 million cycle Life U R uggedized with Secondary containment U c ustomized Specifications AvailableGet all the great performance characteristics of the Micro-Machined Silicon Transducers in these wet/wet differential pressure models. These ruggedstainless steel transducers are ideal for tough industrial automotive, or aerospace applications requiring a wet/wet transducer. They can be used in test benches, filter monitoring, hydraulic, flow, or water/wastewater applications, as well as factory or pneumatic air, pitot tubes, air speed and other industrial or aerospaceapplications. The solid state silicon core and all stainless steel wetted parts will provide long, reliable service life with excellent long term stability. T o obtain their high accuracy and stability, the PX409 Series use state of the art digital mapping of the temperature, pressure and output performance of the silicon sensor in conjunction with a custom ASIC to provide dynamic thermal compensation across the temperature and pressure parameters.Five Electrical Termination StylesPX409, 2 m (6') cable.IP67environmentalrating.IP67environmentalrating.IP65 environmentalrating.IP65environmentalPX419, mini DIn.IP65 environmental rating.PX459, m12 connector.PX409 SeriesPX409-015DWUV, 15 psid range, 10 mV/V output, shown smaller than actual size.f a s t d e l i v e r y !S t o c k t o 2 we e k s o n M o s t Mo d e l s h i g h 0.08%a c c u r a c y metric threads available, visit us onlinecable style.UnI-DIREcTIonAL mV/V SPEcIFIcATIonSoutput: 10 mV/V ratiometricSupply Voltage:5 to 10 Vdc current Draw: 5 mA @ 10 Vdc Input Impedance: 1000 to 5000 Ωoutput Impedance: 5000 Ω ±10% typical Zero Balance: Ranges ≤ 2.5psi: ±1% typical (2% maximum) Ranges > 2.5psi: ±0.5% typical (1% maximum)Span Setting: Ordering Examples: PX409-100DWUV, 0 to 100 psi uni-directional wet/wet differential pressure range, 10 mV/V output, 0.08% accuracy, 1⁄4 NPT fittings, 2 m (6') cable.PX419-015DWUV, 0 to 15 psi uni-directional wet/wet differential pressure range, 10 mV/V output, 0.08% accuracy, 1⁄4 NPT fittings, mini DIN connector.PX429-10WDWUV, 0 to 10 inH 2O uni-directional wet/wet differential pressure range, 10 mV/V output, 0.08% accuracy, 1⁄4 NPT fittings, twist-lock connector plus PT06F10-6S, mating connector.PX409-030DWUV, 30 psid range, 10 mV/V output, shown smaller than actual size.f a s t d e l i v e r y !S t o c k t o 2 we e k so n M o s t Mo d e l s cable style.[*] Enter “5” for PX459 M12 connector or “2” for PX429 twist lock connector (mating PX429 connector sold separately).metric threads available, visit usonlinef a s td e l i v e S t o c k t o 2 w e o n M o s t M o d mini DIn style.metric threads available, visit us onlinePX419-100DWU5V, 100 psid range, 0 to 5 Vdcoutput shown smaller than actual size.weT/weT differenTialPreSSure ModelS uni-direcTionalrangeS wiTh 4 to 20 ma ouTPuTSUnI-DIREcTIonALmA SPEcIFIcATIonSoutput: 4 to 20 mASupply Voltage:9 to 30 Vdc;[9 to 20 Vdc above 105°C (229°F)]max Loop Resistance: (Vs-9) x 50 Ω Zero Balance:Ranges > 2.5psi: ±0.5% typical (1% maximum) Ranges ≤ 2.5psi: ±1% typical (2% maximum)Span Setting:Ordering Examples: PX409-100DWUI, 0 to 100 psi uni-directional wet/wet differential pressure range, 4 to 20 mA output, 0.08% accuracy, 1⁄4 NPT fittings, 2 m (6') cable.PX419-015DWUI, 0 to 15 psi uni-directional wet/wet differential pressure range, 4 to 20 mA output, 0.08% accuracy, 1⁄4 NPT fittings, mini DIN connector.PX429-10WDWUI, 0 to 10 inH 2O uni-directional wet/wet differential pressure range, 4 to 20 mA output, 0.08% accuracy, 1⁄4 NPT fittings, twist-lock connector plus PT06F10-6S, mating connector.f a s t d e l i v e r y !S t o c k t o 2 we e k so n M o s t Mo d e l s PX429-005DWUI, 5 psid range, 4 to 20 mA output, shown smaller thanactual size.Twist-lock style.metric threads available, visit us online[*] Enter “5” for PX459 M12 connector or “2” for PX429 twist lock connector (mating PX429 connector sold separately).。
高精度电流传感器规格书.pdf
高精度电流传感器规格书RIT 01深圳市航智精密电子有限公司RIT01 剩余电流传感器多点零磁通技术系统应用于现有高精度直流传感器技术之上，激励磁通闭环控制技术、自激磁通门技术及多闭环控制技术相结合，实现了对激励磁通、直流磁通、交流磁通的零磁通闭环控制，并通过构建高频纹波感应通道实现了对高频纹波的检测，从而使传感器在全带宽范围内拥有比较高的增益和测量精度。
产品图片核心技术性能特点◇激励磁通闭环控制技术◇原、副边隔离测量◇自激退磁技术◇出色的线性度和准确度◇多点零磁通技术◇极低的温漂◇多级量程自动切换技术◇极低的零漂◇温控补偿技术◇强抗电磁干扰能力◇宽频带和低响应时间应用领域◇工业控制◇医疗设备◇铁路◇电力、电网◇电测仪器仪表◇新能源电气性能项目符号测试条件最小值标称最大值单位原边额定电流I PN—0 0.1 — A 原边过载电流I P——200% I PN— A 工作电压V C—±14.2 ±15 ±15.8 V 功耗电流I PWR—±30 mA 输出电压V SN0 ±2 —V精度测量项目符号测试条件最小值标称最大值单位精准度X G输入直流，额定量程——0.2 % 线性度εL全范围——0.2 % 零点电压I OT全温度范围——±10 mV 反应时间t r上升至90%I PN—— 2 us 频带宽度（-3dB） F —0 —100 kHz安全特性项目符号测试条件数值单位隔离电压/ 原边与副边之间Vd 50Hz,1min 5 KV瞬态隔离耐压/ 原边与副边之间Vw 50us 10 KV爬电距离/ 原边与外壳之间dCp —11 mm电气间隙距离/ 原边与外壳之间dCi —11 mm 相比漏电起痕指数CTI IEC-60112 275 V一般特性项目符号测试条件最小标称最大单位工作温度范围T A—-40 —+85 ºC存储温度范围T S—-55 —+95 ºC相对湿度RH —20 80 —质量M ——350±10 —g运行状态说明◇正常运行时，绿灯常亮：设备上电后，当设备正常工作时，绿色指示灯常亮，D-Sub9接口的第3脚和第8脚导通。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
苏州能斯达电子科技有限公司
DF9-40系列规格书REV2.1Jan-191/4
✓已通过ROHS认证
柔性薄膜压力传感器
DF9-40
系列
超薄，厚度小于0.3mm
响应速度快
寿命长，通过100万次以
上按压测试检测电路简单，易于集成应用可定制传感器外形可定制传感器量程参数DF9-40系列柔性薄膜压力传感器是苏州能斯达拥有自主知识产权的柔性压力传感技术在柔韧轻薄材料上印刷附着力强、耐弯折、灵敏度高的柔性纳米功能材料，使其实现对压力的高灵敏度检测。
柔性薄膜压力传感器是一种电阻式传感器，输出电阻随施加
在传感器表面压力的增大而减小，通过特定的压力-电阻关系，可
测量出压力大小。适用于柔性面的压力测量场景，可广泛应用于
智能家居、消费电子、汽车电子、医疗设备、工业控制、智能机
器人等领域。
DF9-40系列目前有500g、2kg、5kg、10kg、20kg等不同
量程型号产品。
尺寸规格
标识尺寸（mm）
长度40.0
敏感区外径10.0
敏感区内径7.5
Pin脚距离2.54
公差0.2
尺寸表
尺寸图
产品特点产品描述
苏州能斯达电子科技有限公司
DF9-40系列规格书REV2.1Jan-192/4
性能指标
型号DF9-40@500gDF9-40@2kgDF9-40@5kgDF9-40@10kgDF9-40@20kg
量程500g2kg5kg10kg20kg
厚度<0.3mm
外观尺寸见尺寸表
响应点20g20g150g150g200g
重复性<±9.7%(60%负载)
一致性±10%（同一型号批次）
迟滞+10%(RF+-RF-)/RF+
耐久性＞100万次
初始电阻＞10MΩ(无负载)
响应时间<1ms
恢复时间<15ms
测试电压典型值DC3.3V
工作温度-20℃-60℃
电磁干扰EMI不产生
静电释放ESD不敏感
力敏特性
以下为DF9-40系列各型号柔性薄膜压力传感器的压力-电阻值曲线图。左侧图表显示了
全部电阻范围内的压力-电阻值关系；右侧图表为左侧图标的局部细节展示，显示了电阻值
在30kΩ以下的压力-电阻关系。
注意：
图表中曲线是在特定条件下测得的数据绘制而成，曲线关系仅供参考，实际数据请根据
具体应用情况安装后测试。
DF9-40@500g
DF9-40@2kg
苏州能斯达电子科技有限公司
DF9-40系列规格书REV2.1Jan-193/4
DF9-40@5kg
DF9-40@10kg
DF9-40@20kg
苏州能斯达电子科技有限公司
DF9-40系列规格书REV2.1Jan-194/4
参考电路
参考电路一：
采用分压方式测量。将压力变化在传感器
上产生的电阻值的变化，转换为电压的变
化，Vout为输出电压，可接到后端电路。
根据实际情况选择R1，通常可取47k
Ω~1MΩ；
无压力时，传感器阻值在10MΩ以上，
等效于断路。
参考电路二：
在分压测量的基础上，增加运算放大器电
路，可提高电压测量分辨率；增大驱动电
流。
根据实际情况选择电路参数；
无压力时，传感器阻值在10MΩ以上，
近似断路。
注意事项
传感器使用时尽量使所受负载均匀，避免尖锐物体直接接触传感器；
超量程使用会降低传感器性能甚至破坏传感器；
力敏特性曲线仅供参考；
传感器端子为铜镀锡材质，可根据需求自行焊接引线。需注意，焊接温度不宜太高，建议不超
过300℃，接触时间不超过1秒，以免高温使薄膜衬底融化变形。