试题五 配制5%的食盐溶液40克
实验记录：
1、计算所需食盐的质量（1分）
2、计算所需水的质量、体积（2分）
3、滴管放回烧杯，盖好瓶塞，放回原处，标签向外，把量好的液体倒入指定的烧杯中。
瓶塞未倒放扣1分
标签未向手心扣1分
量取结果误差超过+0.5ml扣1分
滴管使用不正确（包括未悬空、倾斜角度过大、液体外淋等）扣1分
五、溶解食盐（1分）用玻璃棒搅拌至食盐全部溶解
玻璃棒碰到烧杯内壁不扣分，若碰破烧杯扣1分
六、整理复位（2分）配好的溶液倒入指定容器（500ml烧杯）。清洗所用烧杯、玻璃棒。整理仪器复位。
3、天平左右两盘各放一张白纸片，选择适当砝码，用镊子夹取，置于右盘（也可用游码）。
4、打开试剂瓶，瓶塞倒放，用药匙取适量食盐置于左盘致天平平衡，多余食盐放入回收烧杯中，盖好瓶塞，标签向外放回原处，白纸片擦净药匙。
5、用镊子收回砝码于砝码盒，将称好的食盐放入烧杯。
天平未调平扣1分
两盘未放白纸扣1
药品放在右盘扣1分
评分标准
评分细则
一、检查仪器药品是否齐全（1分）
检查后未向老师报告扣1分
二、准确计算所需食盐的质量、水的体积，并填写实验记录。（3分）
计算式错误扣1分
计算结果错误扣1分
计算过程无单位或单位有误扣1分
三、称量所需质量的食盐（4分）
1、天平置于桌面，取下橡皮垫。
2、用镊子将游码置于0刻度，观察天平是否平衡，若不平衡，调节平衡螺母。
称取结果盐误差较大扣1分
四、量取所需体积的蒸馏水（4分）
1、取下盛蒸馏水的细口瓶塞，倒放在桌面上，一手持试剂瓶，标签向手心，另一手扶稳量筒，瓶口紧贴量筒上沿，慢慢倾倒至接近所需刻度线。
2、改用滴管滴加，用滴管吸取液体，取出滴管，悬空竖直在量筒口上方，滴管下端距量筒口1cm左右，逐滴加入，视线水平观察，直至凹液面最低处达到所需刻度，多余液体挤入废液缸。
宿州市2013年初中毕业升学化学实验操作试题评分细则
试题五配制5%的食盐溶液40克
பைடு நூலகம்实验内容：通过计算、称量、溶解等步骤，配制40克5%的食盐溶液。
仪器药品:托盘天平（带砝码），方纸片、药匙（放试管架上）、量筒（50ml）、胶头滴管（放烧杯中）、玻璃棒（放烧杯中）、200ml烧杯两个（贴标签分别用于配溶液和回收食盐）、500ml烧杯一个（贴签用于回收食盐溶液）、蒸馏水（放细口瓶中）、食盐（放试剂瓶中）、擦纸、废物桶，废液缸。
ITT CANNON连接器手册中文版
冲压成形加工 36
冲压成形加工 37-38
机械加工 42
传感器器型号2 插座
铜合金镀银
19芯 插头
19芯
法兰插座/锁紧螺母 /线对线
铜合金镀锡、镀银、 铜合金镀锡、镀银、
镀金
镀金
机械加工 43
冲压成形加工 45
冲压成形加工 46-48
APD / ISO 15170
系列 类型
插针材料
插针型号 页码
37芯 插头
RoHS合规信息
ITT在全球所有的电子元件工厂实施了严格的产品控制 计划，使得Cannon、VEAM和BIW连接器产品系列满足欧 盟指令2002/95/EC（又称“减少有害物质”计划）的要求， 对于适当、具体的Cannon、VEAM或BIW产品，订购时可 以为产品编号加上前缀R，确保我们的客户收到符合RoHS 的产品，应用于其商业电子元件和设备中。由于大多数的 RoHS有害物质集中在特定的金属镀层和铅焊涂层上，符合 RoHS的ITT产品提供以下镀层精饰：非电镀镍，不锈钢， 阳极氧化铝和镀金。请注意，在订购板载连接器时，我们 推荐使用镀金替代锡铅焊接。
1/2芯连接器的应用包括： •起重机 •船上厨房 •天线和基站的电力供应
电力分配： •卡车 •牵引车
电气参数
工作电压 工作电流 接触电阻 耐电压 绝缘电阻
机械参数 耐用性 插合扭矩 静负荷,自由状态
48 VDC* 请看温度-电流曲线 0,4mΩ（最大） 1000VAC， 60秒 10 MΩ（最小）
50次插配循环 2Nm（最大） 350 N (ISO 15170-2, Sec. 4.6)
Cannon ҹBKAD/E㋏߫ ᠽሩᴎᶊ䴶ᵓ 䖲఼ˈᓎゟњ 㟾ぎϞⱘ䞠
Series 6 双烤箱 MBA5785S6B 配件列表和功能介绍说明书
Series 6, Built-in double oven MBA5785S6BOptional accessoriesHEZ317000 Pizza pan, enamelledHEZ327000 Pizza stoneHEZ531000 Baking tray, enamelledHEZ531010 Baking tray, non-stick ceramic coated HEZ532000 Multipurpose pan, enamelledHEZ532010 Universal pan, non-stick ceramic coated HEZ538000 1fold telescopic rail, level independent HEZ634000 Baking and roasting grid (standard) HEZ664000 Baking and roasting grid (steam)HEZ915003 Glass roasting dish, 5,4 LHZ629070 Air Fry & Grill trayHZ638000 Full ext rails, level independent • Meatprobe: measures the optimal core temperature of the roast.• 3D Hotair: even heat distribution for perfect results on up to three levels.• AutoPilot 30: Perfectly cooks dishes thanks to 30 pre-set automatic programmes.• Pop-out controls: Make the front of the oven easy to clean and give it a sleek look.• Cooking tips: Access food trends and cooking advice via the Home Connect app.Technical DataBuilt-in / Free-standing: ...........................................................Built-in Dimensions: ........................................................888 x 594 x 550 mm Dimensions of the packed product (HxWxD): .....960 x 660 x 690 mm Control Panel Material: ................................................Stainless steel Door Material: ............................................................................Glass Net weight: ..............................................................................60.0 kg Usable volume (of cavity) - cavity 1: ..............................................71 l Cooking method: .......Defrost, Full width grill, Hotair gentle, Hot Air, Conventional heat, Pizza setting, low temperature cooking, Hot air grilling, warmingOven control: ......................................................................electronic Number of interior lights: .. (1)EAN code: (4242005185238)Energy efficiency rating: ....................................................................A Energy consumption per cycle conventional (2010/30/EC): .......1.02 kWh/cycleEnergy consumption per cycle forced air convection (2010/30/EC):0.81 kWh/cycleEnergy efficiency class (2010/30/EC) - cavity 2: ...............................B Energy consumption per cycle conventional - cavity 2 (2010/30/EC):0.83 kWh/cycleEnergy efficiency index (2010/30/EC): .....................................95.3 % Energy efficiency index cavity 2 (2010/30/EC): ......................120.3 % Connection rating: ..................................................................6300 W Fuse protection: ...........................................................................32 A Voltage: ...............................................................................220-240 V Frequency: .................................................................................50 Hz Plug type: ..........no plug (electrical connection by electrician), fixed connection (electrical connection by electrician)Included accessories cavity 1: 3 x combination grid, 1 x universal panSeries 6, Built-in double ovenMBA5785S6BDesign- LCD-display control (white)- Interior halogen light, Light on/off when oven door opened/closed - Rotary dial, Retractable control dials, round- Straight bar handleFeatures- Home Connect ready- Electronic door lock- Control panel lock Automatic safety switch off Residual heat indicator Door contact switch- Digital temperature display with proposal- Automatic start Heating-up indicator AutoPilot meat probe- Electronic clock timerTop oven additional features- Cavity volume: 34 litre capacity- Pyrolytic Cleaning in top oven- Full glass inner door- Cavity (inner surface) top: Enamel grey- Door hinge small cavity: bottomMain oven additional features- Cavity volume: 71 litre capacity- Pyrolytic self-cleaning function- Full glass inner door- AutoPilot, 30- Single-point meat probe- 5 shelf positions- Door hinge big cavity: Drop down door- Oven with 4 heating methods: conventional top/bottom heat, Large-area grill, Small area grill, bottom heat- Temperature range 30 °C - 275 °C- Oven with 9 heating methods: 3D Hotair, conventional top and bottom heat, Hotair grilling, full width variable grill, pizza function, low temperature cooking, defrost, keep warm, Hotair gentle- Temperature range 30 °C - 275 °C- Fast pre-heating functionAccessories- 3 x combination grid, 1 x universal pan- 1 set of level independent telescopic rails, Stop function Performance/technical information- Energy efficiency rating (acc. EU Nr. 65/2014): B(at a range of energy efficiency classes from A+++ to D)- Energy consumption per cycle in conventional mode:0.83 kwh- Number of cavities: Top Cavity Heat source: electrical- Energy efficiency rating (acc. EU Nr. 65/2014): B(at a range of energy efficiency classes from A+++ to D)- Energy consumption per cycle in conventional mode:0.83 kWh- Energy consumption per cycle in fan-forced convection mode:0.81 kwh- Number of cavities: Main Cavity Heat source: electrical- Total connected load electric: 6.3 KW- Nominal voltage: 220 - 240 V - Appliance dimension (hxwxd): 888 mm x 594 mm x 550 mm- Niche dimension (hxwxd): 875 mm - 888 mm x 560 mm - 568 mm x 550 mm- Please refer to the dimensions provided in the installation manualSeries 6, Built-in double oven MBA5785S6B。
M-System 产品服务政策说明书
Signal ConditionersULTRA-SLIMSIGNAL CONDITIONERSM6 SeriesACTUALSIZEStandard TypeDual Output TypeTERMINAL BLOCK DUAL OUTPUTSIGNAL CONDITIONERSW5-UNIT SeriesSUPER-MINI TERMINAL BLOCKSIGNAL CONDITIONERSM5-UNIT SeriesScheduled to be released in 2021SUPER-MINI TERMINAL BLOCK SIGNAL CONDITIONERSModel: M5XU/M5XV/M5XTRPC-programmableM5-UNIT /W5-UNIT SeriesProvided withzero span adjustmentSupportsspecial specifications Test Report Free of Charge !(*2)(*2)All types with isolated terminalsIf you need a test report, please contact your local distributor.They will send it to you free of charge (pdf version only. Notavailable for all models).2021-08EC-Z224Rev.01500694056 222 38 18*********************SEN TRONIC AGSUPER-MINI TERMINAL BLOCK SIGNAL CONDITIONERSTERMINAL BLOCK DUAL OUTPUT SIGNAL CONDITIONERSW5VS94mm25 mm (0.98 in.)WidthPC programmable modelsare also available.The M5XU, M5XV, and M5XTRmodels allow PC settings.Low ProfileM5-UNIT SeriesACTUAL SIZEM5VS94 mm 45 mm (1.77 in.)WidthSignal splitters with isolated dual outputsFour-port isolation between the input, output 1, output 2, and power supply.Profile : 41 mm (1.61 in.)W5 models can be installed on boards with a shallow depth.Power supply for AC (85-264V) is also available.Supporting 85-264 V AC, 24 V DC, 11-27 V DC, 110 V DC.Low Profile Signal SplittersW5-UNIT SeriesPower supply for AC(85-264V) is also available.Supporting 85-264 V AC, 24 V DC.ACTUAL SIZEThe M5 Seriers offers low-profile terminal block style.All models can be freely mounted onto thin panels.The W5 Series offers low-profile signal splitters with isolated dual outputs.(3.70 in.)(3.70 in.)(*1)(*1) CE marking is not available depending on the model.2(*1)(*1) CE marking is not available depending on the model.terminal coveropenDepending on the model.Depending on the model.Isolation and power supplySpecifications may vary depending on the model.For details, see the datasheet.Power supplyPower supplycircuitInput circuit Output circuitInput signalOutput signalSpecifications may vary depending on the model.For details, see the datasheet.AC power supply: 85-264 V ACDC power supply: 24 V DC, 11-27 V DC, and 110 V DC AC power supply: 85-264 V AC DC power supply: 24 V DCPower supplyPower supply circuitInput circuitOutput-1 signal Output-2circuitOutput-2signalInput signalNo. of models bearing CE marking : 10Structure: Low-profile terminal blockConnections: M3.5 screw terminals Input: See List of Models Output: See the datasheet Installation: DIN rail mounting 14No. of models bearing CE marking : 7Terminal coverTerminal coverTerminal coverDepthThe openable terminal cover engraved with the terminal numbers andconnection guide prevents wiring mistakes and the loss of the cover.No. of models:8No. of models:Terminal blockstructure Three-port isolationAC DCPOWEREDDielectric strength: 2000 V AC @ 1 min.(with DC power supply)Dielectric strength: 1500 V AC @ 1 min.(with AC power supply)Three-port isolationanywhere.Terminal block structure Structure: Low-profile terminal block Connections: M3.5 screw terminals (Input)M3 screw terminals (Output and power supply)Input: See List of Models Output: See the datasheet Installation: DIN rail mountingIsolation and power supplyFour-port isolationDielectric strength: 2000 V AC @ 1 min.(Between input, output 1, output 2, power supply, and ground)Dielectric strength: 1500 V AC @ 1 min.(Between output 1 and output 2)Output-1circuit Four-port isolationAC DCPOWERED41 mm (1.61 in.)Depth41 mm (1.61 in.)Main SpecificationsMain Specifications3Isolators & Sensor InputsPower TransducersIsolators & Sensor InputsFrequency I/O Products Line upFeatures of M5-UNIT Series4056 222 38 18*********************SEN TRONICAGElectronic circuit specially designed for the M5 SeriesToroidal transformer Ceramic capacitorsSeat transformerSIGNAL TRANSMITTERSIGNAL TRANSMITTER (narrow span input)Model: M5VSModel: M5VF2Model: M5VSHModel: M5MVSIGNAL TRANSMITTER(high speed response 30μs.)A toroidal transformer with a donut-shaped core is anindispensable part of an efficient and high-speed response.The M5VS circuit is an efficient electronic circuit designed tooperate with the minimum number of parts without compromising performance and quality.With the ultra-slim sheet transformer made from a printed circuit board, the M5VSH has achieved a dielectric strength of 2000 V AC without taking up much space.The M5MV is a signal transmitter incorporating an electric circuit based on the electric circuit design of the M5VS so that the inputsection can handle minute signals. Also, as with the M5VS, the AC power supply does not usealuminum electrolytic capacitors.SIGNAL TRANSMITTER(high dielectric strength)Economical DC input signal transmitterSignal transmitter with ultra-fast 30μs response speed.Signal transmitter with high dielectric strength that withstands 2000 V ACSignal transmitter suitable for minute signal input5Optional specifications are available to meet various requirements, including coating designation. If you want to specify an option, write “/ Q” at the end of the order code. Then enter the optional specifications separately from the order code.Optional Specifications /C01/V01Optional Specifications code (example)Multi-turn potentiometer for fine adjustment Stainless steel screws Standard potentiometer Nickel-plated iron screws• The presence or absence of optional specifications and the supported content differ depending on the model. For details, see the datasheet.SPECIFICATIONS OF OPTION: Q(multiple selections)COATING/C01: Silicone coating/C02: Polyurethane coating /C03: Rubber coating ADJUSTMENT/V01: Multi-turn fine adjustment /VN : Sealed adjustment holes TERMINAL SCREW MATERIAL /S01: Stainless steelModel : M5VS- -/QOptional SpecificationsOrder code (example)INPUT OUTPUT POWER INPUT blank : none/Q : Option other than the aboveOPTIONS12346products of which we changed the design.Our Quality Assurance Dept. conducts a prototype evaluation before releasing a new product. We validate the products based on the various regulations / standards and the company standards mainly classified into an EMC (*4) test as a part of the evaluation test. Our anechoic chamberused for the EMC test is certified and registered by the official body (VCCI (*5)and we conduct an official test instead of a simplified test.No additional chargesM-System also respondsquickly to technical inquiries.M-System will standardize special specifications.Inquiries are answered promptly.The special specifications you ordered will be standardized in sequence.Various special specifications (request examples from customers)The range does not match with that of the standard specificationWe want to combine with the special sensorDifferent power supply voltageWe want an external volume• For details, contact M-System through the hotline.The Design Department needs to conduct a technical examination to see whether the special specifications you have inquired about can be manufactured.M-System responds to you with a technical review as soon as possible.We will standardize the special specification items,beginning with the ones most requested. Once they arestandardized, you will no longer need troublesome meetings or specification check when you place an order.EMC test required by the EMC directiveAnechoic chamber certified andregistered by the official body (VCCI (*5))A large shielded room of 6 m x 6 mwhere multiple tests can be conducted simultaneouslyEMC (Electro Magnetic Compatibility): Tests to check the effect by applying an electromagnetic noise toa device and to measure the electromagnetic wave and conductive common mode noise emitted from the device.VCCI (Voluntary Control Council for Interference by information technology equipment): Formerlyknown as Voluntary Control Council for Information Technology Equipment. An industry organization in Japan that discusses the regulations on the radio waves emitted from the information technology equipmentEvaluation testThe EMC test required for M-System to acquire the CE marking has the following test items and all of them are conducted by our own facility at Kyoto Techno Center (Kizugawa-City, Kyoto).We offer an enormous selection of signalconditioners and remote I/Os, power monitors, paperless recorders, panel meters, surgesuppressors and valve actuators, and even that may not be enough for your particular needs. But do not give up easily. Just ask us. We continue to work toward full product offerings with special specifications without additional charge, starting with major product series. In addition, we put our effort to make them into standard selections so that they are more easily accessible to you and everyone else in the future.We want to set the ranges of input signal and output signal to the ones not included in the existing code.We want to use the power supply compatible with the special CVCF(constant voltage and constant frequency unit).We want to match a marine power supply.We want to attach the volume toadjust the bias of the ratio conditioner onto the control panel surface.We want to combine with special sensor or thermistor not included in the standard.The special specification example which the legs of a leaded part are reinforced with a special kind of resin for the vibration countermeasure.We strive toward complete offerings with special specification products.(*4)(*5)7CUSTOMER FIRSTM-System Service PoliciesContinued Products Availability1Special specification products can be supplied without additional charge for major product series, except for those requiring excessive labor or materials.We are putting our effort into expansion of the scope of Special Specifications Service to all of our products. Special Specification Service will be available to more product series in the future.Special Specifications Service with no extra charge3During the service period of 36 months from the date of purchase, Special Repair Service47.5 mm (0.30 in.)M6 SeriesUltra-Slim Signal ConditionersFor detailed terms and conditions applicable to each specific product, consult M-System.All M-System’s products and services are provided outside Japan through M-System’s authorized distributors. M-System is trying to enhance the customer satisfaction with following 5 service policies. As to the terms and conditions of a specific service, consult M-System for details.Power supply for AC (100-240V) is also available (*6).Supporting 24 V DC, 100 - 240 VAC .(Only the M6xYV, M6xXU, M6xVS models accept AC power supply.)Extra Performance for Ultra-slim ConstructionThe ultra-slim M6 Series has achieved 2000 V AC isolation with marginal dielectric strength. Despite its ultra-slim housing, the allowable load resistance is 550Ω for 4-20 mA DC output. It has an energy-saving design that does not bother users with heat generation even if M6 Series units are closely mounted in the case of high-density installation.Ultra-slim Signal ConditionersUltra-slim housings of only 5.9 mm (0.23 in.) wide (M6D and M6S series models)Selectable Connection StylesTension-clamp, screw terminal, or Euro terminal styleScan the target 2D code for a list of M6 series models.5.9 mm (0.23 in.)Tension-ClampM6S Series Screw terminalM6N Series Euro terminalM6D Series5.9 mm (0.23 in.)056 222 38 18*********************SEN TRONIC AG。
【8A版】ISO2531球墨铸铁管及管件标准(中文)
国际标准ISO2531输水用球墨铸铁管、管件、附件及接头目录1适用范围………………………………………………………………………………………………. 2引用标准………………………………………………………………………………………………. 3定义……………………………………………………………………………………………………. 4技术要求……………………………………………………………………………………………….4.1总则………………………………………………………….…………………………………..4.1.1管和管件………………………………………………………………………………….4.1.2表面质量与修复………………………………………………………………………….4.1.3接头类型与连接………………………………….……………………………………4.1.4与饮用水接触的材质要求…………………………………………………………….4.2尺寸要求…………………………………………………………………………………………..4.2.1直径……………………………………………………………………………………….4.2.2壁厚……………………………………………………………………………………….4.2.3长度………………………………………………………………………………………4.2.4管的平直度………………………………………………………………………………4.3材质性能…………………………………………………………………………………………..4.3.1抗拉强度………………………………………………………………………………….4.3.2布氏硬度………………………………………………………………………………….4.4管的外涂层及内衬………………………………………………………………………………..4.4.1外涂层……………………………………………………………………………………4.4.2内衬………………………………………………………………………………….4.5管件及附件的外涂层及内衬………………………………………………………………..4.5.1外涂层…………………………………………………………………………………..4.5.2内衬……………………………………………………………………………………..4.6标记…………………………………………………………………………………………..5密封要求…………………………………………………………………………………………….. 5.1管和管件………………………………………………………………………………………….5.2柔性接头………………………………………………………………………………………….5.2.1总则……………………………………………………………………………………..5.2.2内部压力………………………………………………………………………………..5.2.3外部压力…………………………………………………………………………….6试验方法…………………………………………………………………………………………….. 6.1尺寸…………………………………………………………………………………………..6.1.1外径……………………………………………………………………………………..6.1.2壁厚……………………………………………………………………………………..6.1.3长度……………………………………………………………………………………..6.2管的平直度……………………………………………………………………………………….6.3拉力试验……………………………………………………………………………………..6.3.1试样………………………………………………………………………………….6.3.2试棒………………………………………………………………………………….6.3.3设备与试验方法………………………………………………………………………6.3.4试验结果………………………………………………………………………………6.3.5试验频率………………………………………………………………………………6.4布氏硬度…………………………………………………………………………………………6.5输水用管和管件的密封试验……………………………………………………………………6.5.1总则……………………………………………….……………………………………6.5.2离心铸铁管……………………………………….……………………………………6.5.3非离心铸铁管与管件…………………………………………………………………7型式试验…………………………………………………………….……………………………………7.1内压力下接头密封………………………………………….……………………………………7.2外压力下接头密封………………………………………………………………………………8尺寸表……………………………………………………………………………………………………8.1承插直管…………………………………………………….……………………………………8.2法兰管……………………………………………………….……………………………………8.2.1离心铸造焊接法兰管……………………………………………………………………8.2.2离心铸造螺栓连接法兰管………………………………………………………………8.2.3整体铸造法兰管…………………………………………………………………………8.3承接管件…………………………………………………….……………………………………8.3.1盘承套管…………………………………………………………………………………8.3.2盘插套管………………………………………….……………………………………8.3.3承套……………………………………………….……………………………………8.3.4双承90°(1/4)弯管……………………………………………………………………8.3.5双承45°(1/8)弯管……………………………………………………………………8.3.6双承22°30′(1/16)弯管……………………………………………………………8.3.7双承11°15′(1/32)弯管……………………………………………………………8.3.8全承T型管………………………………………………………………………………8.3.9DN40～DN250双承单支盘T型管……………….……………………………………8.3.10DN300～DN700双承单支盘T型管…………………………………………………8.3.11DN800～DN2600双承单支盘T型管…………………………………………………8.3.12双承渐缩管………………………………………..……………………………………8.4盘接管件……………………………………………………………………………………………8.4.1双盘90°(1/4)弯管……………………………….……………………………………8.4.2双盘90°(1/4)地脚弯管………………………………………………………………8.4.3双盘45°(1/8)弯管……………………………………………………………………8.4.4DN40～DN250全盘T型管………………………..……………………………………8.4.5DN300～DN700全盘T型管……………………………………………………………8.4.6DN800～DN2600全盘T型管…………………….……………………………………8.4.7双盘渐缩管……………………………………………………………………………8.4.8PN10盲法兰板……………………………………………………………………………8.4.9PN16盲法兰板…………………………………………………………………………8.4.10PN25盲法兰板…………………………………………………………………………8.4.11PN40盲法兰板…………………………………………………………………………8.4.12PN10减径法兰盘………………………………………………………………………8.4.13PN16减径法兰盘………………………………………………………………………8.4.14PN25减径法兰盘………………………………………………………………………8.4.15PN40减径法兰盘………………………………………………………………………附录A(参考性)用途、土壤特性………………………………….……………………………………附录B(参考性)用途、水质特性………………………………………………………………………附录C(参考性)管的韧性和径向偏差…………………………………………………………………前言ISO(国际标准组织)是世界范围内的国家标准团体(ISO成员)的联合组织，国际标准的制定工作由ISO技术委员会执行。
六数控钻说明书2018
F10下一页
F6后退连线设定
F2 IP连线
提示存储成功后，再重新开启模拟器；如果提示连线失败，请检查系统是否已开机正常，网线链接是否正常。
驱控一体系统电池更换
使用周期达7-9个月时间，需更换电池盒内的电池（3节1号干电池1.5V）
注意事项：1；更换电池请在备处于通电的状态下进行操作
2；如果对此有疑问，可咨询专业的人员后进行操作
4加工完毕
4.1:关闭HHcnc→CncMon32→关闭PC系统
4.2:关闭电源停止
4.3:待PC完全关闭后关闭总电源
M
序号
名称
M代码
OUTPUT
1
工作指示灯
R65.0
Y0
Y0.0
2
暂停指示灯
R65.1
Y1
Y0.1
3
上主轴启动
M3/M5
R65.2
Y2
Y0.2
4
上钻包启动
M6/M7
R65.3
Y3
Y0.3
使用手册
全自动六面钻铣加工中心
SKS-690
1、安装注意事项··································3-4
2、面板按钮开关··································5
3、安全注意事项··································6
5
下主轴启动
M13/M15
R65.4
Y4
Y0.4
6
下钻包启动
M16/M17
R65.5
Y5
Y0.5
7
风机启动
M26/M27
R65.6
YM06132C205NQ 和 YM061U2C2WCNB 系列的交流开关锁定手册说明书
YM06132C205NQ YM061U2C2WCNB YM06132C2WCNB YM06132C205NQL–15Dimensions are shown: Inch (mm)Specifications and dimensions subject to changeSwitchlockModels AvailableYM Series4 Tumbler Miniature SwitchlocksFeatures/Benefits•S nap-together assembly allows for pre-wiring of switch• Wire lead terminations available • 4 Tumbler lock with positive detentTypical Applications • Cable TV connectors • Automotive accessories • ComputersSpecificationsCONTACT RATING: Q contact material: 4 AMPS @ 125 V AC or28 V DC; 2 AMPS @ 250 V AC (UL/CSA). 4 AMPS @ 125 V AC, 2 AMPS @ 250 V AC, T65, class 1 (VDE). See page L-17 for additional ratings.ELECTRICAL LIFE: 10,000 make-and-break cycles at full load.CONTACT RESISTANCE: Below 10 m Ω typ. initial @2-4 V DC, 100 mA.INSULATION RESISTANCE: 109 Ω min.DIELECTRIC STRENGTH: 1,000 Vrms min. @ sea level.INDEXING: 90º:2 positions.MaterialsLOCK: Zinc alloy with stainless steel facing. 4 tumbler singlebitted lock with integral detent mechanism.KEYS: Two nickel plated brass keys with code number.SWITCH HOUSING: 6/6 Nylon (UL 94V-2).CONTACTS & TERMINALS: Q contact material: Copper, silverplated. See page L-17 for additional contact materials.MOUNTING NUT: Brass, bright zinc plated.NOTE: Any models supplied with Q or B contact material are RoHS compliant.NOTE: Specifications and materials listed above are for switchlocks with standard options. For information on specific and custom switchlocks, consult Customer Service Center.Build-A-SwitchTo order, simply select desired option from each category and place in the appropriate box. Available options are shown and described on pages L–16 and L–17. For additional options not shown in catalog, consult Customer Service Center.Switch and Lock FunctionYM0613 SPST, 90º Index, keypull pos. 1YM061U SPST, 90º Index, keypull pos. 1 & 2Mounting Style NWith nut Keying2 Two nickel plated brass keys Lock Finish2 Stainless steel facing 8 Gloss black facing Terminations 05 Quick connect WC Wire leadContact Material QSilver B GoldLock Type C 4 Tumbler, single bitted lockwith detentL–16Specifications and dimensions subject to changeS w i t c h l o c kYM Series= Detent Positions (90º)= Key pull possible in these positions = Stop PositionsLEGEND8 GLOSS BLACK FACING2 STAINLESS STEEL FACINGAll models with all options when ordered with ‘Q’ contact material.L–17Specifications and dimensions subject to changeSwitchlockAll modelswith all options when ordered with ‘Q’ contact material.YM Series4 Tumbler Miniature SwitchlocksAVAILABLE HARDWAREPANEL MOUNTING.420(10,67).472 DIA.(11,99 )Panel thickness:.300 (7,62) max.N WITH NUTWC WIRE LEAD05 QUICK CONNECTNut part number: 1790901A47Black wire standard, other colors and lengths available, consult Customer Service Center. UL style 1015.Key Code: 0029PART NO. (ONE KEY)960B10029Material: BrassFinish: Nickel plate1 CONTACTS & TERMINALS: Copper, with gold plate over nickel plate.2 C ONTACTS & TERMINALS: Copper, silver plated (standard with alltermination options).* Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications.CONTACT AND OPTION CODETERMINAL MATERIALRATINGQ 4 AMPS @ 125 V AC or 28 V DC; 2 AMPS @ 250 AC V AC (UL/CSA).LOW LEVEL/DRY CIRCUITBSILVER 2POWER0.4 VA MAX. @ 20 V AC or DC MAX.RoHSCOMPLIANT *RoHS COMPATIBLE*YES YES YESYESGOLD 1YM06132C205NQ YM061U2C2WCNB YM06132C2WCNB YM06132C205NQ。
YB65_型包装机推烟板轴向定位装置的改进及应用
置有效降低了圆锥齿轮副间的接触压力，提高了圆锥齿轮的使用寿命，降低了不合格品流入下道工序的风险，也
降低了更换相关零件的频次，节约维修成本的同时也提高了设备的运行效率。
关键词 ：YB65型包装机 ；推烟板 ；圆锥齿轮 ；轴向定位
中图分类号 ：TS 434
文献标志码 ：A
YB65 型包装机将 2 排 5 包的烟包外包裹一张条盒纸， 完成烟包的条盒包装。其推烟机构的圆锥齿轮受结构所限， 易磨损，使用寿命较低。当齿轮发生磨损时，会导致机构运 动不灵活、不准确，初期会偶发不合格烟包流入下道工序的 现象。该现象较难发现，并影响产品质量。后期会造成齿根 断裂，使机构运动失效。修复该机构平均需要 2.5h，是该设 备在使用过程中普遍存在的难题。
34 25 26 27
30 31
28 29
1-弹簧；2-套；3-轴承；4-圆锥销；5-螺钉；6-摆动块；7-扭簧；8-螺钉；9-摆动块；10-紧定螺钉；11-隔套；12-螺钉；13-小板；14-滚动轴承； 15-螺钉；16-支撑板；17-活动推烟板；18-螺钉；19-支架；20-圆锥齿轮与支架组合体；21-圆锥齿轮轴；22-螺钉；23-导向轴；24-推板体；25-滚动 轴承；26-滑套；27-螺钉；28-该文发明的滑座；29-连杆；30-挡板；31-螺钉；32-推力轴承；33-限位螺钉；34-螺母。
参考文献 [1] 黄德良 .ZB25型包装机组 ：第1版 [M]. 北京 ：中国科学技 术出版社，2001. [2] 成大先 . 机械设计手册 ：第5版 [M]. 北京 ：化学工业出版 社，2007.
12
17
11 32
13
15
10
2 345
67 89
1
14 33
ygm65高压悬辊磨技术参数
ygm65高压悬辊磨技术参数ygm65高压悬辊磨是一种常见的磨粉设备，其技术参数对于了解该设备的特点和性能至关重要。
本文将深入探讨ygm65高压悬辊磨的技术参数，以及其在磨粉过程中的应用和优势。
一、ygm65高压悬辊磨的技术参数1. 最大进料粒度：ygm65高压悬辊磨的最大进料粒度通常为15毫米。
这意味着原料在进入设备之前需要进行预处理，以将粒度控制在15毫米以内。
2. 加工粒度：ygm65高压悬辊磨可以实现较为细致的加工效果，其加工粒度通常在0.613毫米-0.033毫米之间。
这一范围适用于许多工业领域，如建材、化工等，可以满足不同行业对于粉体产品的需求。
3. 磨辊数量：ygm65高压悬辊磨通常配有3个磨辊，其中两个位于主机上方，一个位于主机下方。
这种设计可以有效地提高设备的磨矿效率，保证了较高的生产能力。
4. 磨辊直径和工作宽度：ygm65高压悬辊磨的磨辊直径通常为210毫米，工作宽度为150毫米。
这种设计使得磨辊具有更大的表面积，有利于提高物料与磨辊之间的接触面积，从而增加产量。
5. 主机功率：ygm65高压悬辊磨的主机功率通常为75千瓦。
高功率的主机可以保证设备在处理大量原料时的稳定运行和高效工作。
二、ygm65高压悬辊磨的应用和优势ygm65高压悬辊磨是一种广泛应用于矿山、建材、化工等行业的磨粉设备。
它具有以下几个优势：1. 高压悬辊磨的磨矿效率高，能耗低。
由于设备配有多个磨辊，使得物料在磨矿过程中得到充分的磨碎，从而提高了磨矿效率。
设备采用高压气体进行磨矿，可以减少能耗，提高能源利用率。
2. ygm65高压悬辊磨具有较强的适应性。
该设备可以适用于各种不同硬度和湿度的物料，如煤矸石、石灰石等，具有较强的处理能力和广泛的应用领域。
3. 设备结构紧凑，占地面积小。
ygm65高压悬辊磨的结构设计紧凑，体积小，可以有效地节省生产空间，提高生产效率。
4. ygm65高压悬辊磨具有较强的稳定性和可靠性。
钢板知识简介
钢板知识简介钢板是钢材四大品种（板、管、型、丝）之一，在发达国家，钢板产量占钢材生产总量50%以上，随着我国国民经济的发展，钢板生产量逐渐增长。
钢板是一种宽厚比和表面积都很大的扁平钢材。
钢板按厚度分为薄板和厚板两大规格。
薄钢板是用热轧或冷轧方法生产的厚度在0.2-4mm之间的钢板。
薄钢板宽度在500-1400mm之间。
根据不同的用途，薄钢板采用不同材质钢坯轧制而成。
通常采用材质有普碳钢、优碳钢、合金结构钢、碳素工具钢、不锈钢、弹簧钢和电工用硅钢等。
它们主要用于汽车工业、航空工业、搪瓷工业、电气工业、机械工业等部门。
薄钢板除轧制后直接交货之外，还有经过酸洗的、镀锌和镀锡等种类。
厚钢板是厚度在4mm以上的钢板的统称，在实际工作中，常将厚度小于20mm 的钢板称为中板，厚度＞20mm至60mm的钢板称为厚板，厚度＞60mm的钢板则需在专门的特厚板轧机上轧制，故称特厚板。
厚钢板的宽度从0.6mm-3.0mm。
厚板按用途又分造船钢板、桥梁钢板、锅炉钢板、高压容器钢板、花纹钢板、汽车钢板、装甲钢板和复合钢板等。
钢板的一个分支是钢带，钢带实际上是很长的薄板，宽度比较小，常成卷供应，也称为带钢。
钢带常在多机架连续式轧机上生产，切成定尺长度后就是钢带，因此生产率比单张机制时高。
一、中厚板（一）普通中厚钢板1、普碳钢沸腾钢板（GB3274-88）普碳钢沸腾钢板顾名思义是由普通碳素结构钢的沸腾钢热轧制成的钢板。
沸腾钢是一种脱氧不完全的钢材，钢液含氧量较高，当钢水注入钢锭模后，碳氧反应产生大量气体，造成钢液呈沸腾状态而得名。
沸腾钢含碳量低，且由于不用硅铁脱氧，故钢中含硅量常＜0.07%。
沸腾钢的外层是在沸腾状态下结晶的，所以表层纯净、致密，表面质量好，加工性能良好。
沸腾钢没有大的集中缩孔，用脱氧剂少，钢材成本低。
沸腾钢心部杂质多，偏析较严重，力学性能不均匀，钢中气体含量较多，韧性低、冷脆和时效敏感性较大，焊接性能较差，故不适用于制造承受冲击截荷，在低温下工作的焊接结构件和其他重要结构件。
芯片丝印对应型号资料分享 (67)
电源芯片 丝印AMAAPM 丝印AMABPM 丝印AMA7PM 丝印AMA6PM 丝印AMA5PM 丝印AMA4PM 丝印AMA3PM 丝印AMA2PM 丝印AMA1PM 丝印AMACPM 丝印AMAOPM 丝印AMA0PM 封装SOP8
电源芯片 丝印AMAAPN 丝印AMABPN 丝印AMA7PN 丝印AMA6PN 丝印AMA5PN 丝印AMA4PN 丝印AMA3PN 丝印AMA2PN 丝印AMA1PN 丝印AMACPN 丝印AMAOPN 丝印AMA0PN 封装SOP8
电源芯片 丝印AMAAPO 丝印AMABPO 丝印AMA7PO 丝印AMA6PO 丝印AMA5PO 丝印AMA4PO 丝印AMA3PO 丝印AMA2PO 丝印AMA1PO 丝印AMACPO 丝印AMAOPO 丝印AMA0PO 封装SOP8
电源芯片 丝印AMAAPF 丝印AMABPF 丝印AMA7PF 丝印AMA6PF 丝印AMA5PF 丝印AMA4PF 丝印AMA3PF 丝印AMA2PF 丝印AMA1PF 丝印AMACPF 丝印AMAOPF 丝印AMA0PF 封装SOP8
电源芯片 丝印AMAAPG 丝印AMABPG 丝印AMA7PG 丝印AMA6PG 丝印AMA5PG 丝印AMA4PG 丝印AMA3PG 丝印AMA2PG 丝印AMA1PG 丝印AMACPG 丝印AMAOPG 丝印AMA0PG 封装SOP8
电源芯片 丝印AMAAPJ 丝印AMABPJ 丝印AMA7PJ 丝印AMA6PJ 丝印AMA5PJ 丝印AMA4PJ 丝印AMA3PJ 丝印AMA2PJ 丝印AMA1PJ 丝印AMACPJ 丝印AMAOPJ 丝印AMA0PJ 封装SOP8