HP4194A繁体中文说明书
HP Service Manager软件版本9.41用户指南说明书
HP Service ManagerSoftware Version:9.41For the supported Windows®and UNIX®operating systems What's New help topics for printingDocument Release Date:September2015Software Release Date:September2015Legal NoticesWarrantyThe only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services.Nothing herein should be construed as constituting an additional warranty.HP shall not be liable for technical or editorial errors or omissions contained herein.The information contained herein is subject to change without notice.Restricted Rights LegendConfidential computer software.Valid license from HP required for possession,use or copying.Consistent with FAR12.211and12.212,Commercial Computer Software, Computer Software Documentation,and Technical Data for Commercial Items are licensed to the ernment under vendor's standard commercial license.Copyright Notice©1994-2015Hewlett-Packard Development Company,L.P.Trademark NoticesAdobe®is a trademark of Adobe Systems Incorporated.Microsoft®and Windows®are U.S.registered trademarks of Microsoft Corporation.Oracle and Java are registered trademarks of Oracle and/or its affiliates.UNIX®is a registered trademark of The Open Group.Linux®is the registered trademark of Linus Torvalds in the U.S.and other countries.For a complete list of open source and third party acknowledgements,visit the HP Software Support Online web site and search for the product manual called HP Service Manager Open Source and Third Party License Agreements.Documentation UpdatesThe title page of this document contains the following identifying information:Software Version number,which indicates the software version.Document Release Date,which changes each time the document is updated.Software Release Date,which indicates the release date of this version of the software.To check for recent updates or to verify that you are using the most recent edition of a document,go to:https:///.This site requires that you register for an HP Passport and to sign in.To register for an HP Passport ID,click Register on the HP Support site or click Create an Account on the HP Passport login page.You will also receive updated or new editions if you subscribe to the appropriate product support service.Contact your HP sales representative for details. SupportVisit the HP Software Support site at:https://.This website provides contact information and details about the products,services,and support that HP Software offers.HP Software online support provides customer self-solve capabilities.It provides a fast and efficient way to access interactive technical support tools needed to manage your business.As a valued support customer,you can benefit by using the support website to:Search for knowledge documents of interestSubmit and track support cases and enhancement requestsDownload software patchesManage support contractsLook up HP support contactsReview information about available servicesEnter into discussions with other software customersResearch and register for software trainingMost of the support areas require that you register as an HP Passport user and to sign in.Many also require a support contract.To register for an HP Passport ID,click Register on the HP Support site or click Create an Account on the HP Passport login page.To find more information about access levels,go to:https:///web/softwaresupport/access-levels.HPSW Solutions Catalog accesses the HPSW Integrations and Solutions Catalog portal website.This site enables you to explore HP Product Solutions to meet your business needs,includes a full list of Integrations between HP Products,as well as a listing of ITIL Processes.The URL for this website ishttps:///group/softwaresupport/search-result/-/facetsearch/document/KM01702710.About this PDF Version of Online HelpThis document is a PDF version of the online help.This PDF file is provided so you can easily print multiple topics from the help information or read the online help in PDF format.Because this content was originally created to be viewed as online help in a web browser,some topics may not be formatted properly.Some interactive topics may notbe present in this PDF version.Those topics can be successfully printed from within the online help.ContentsWhat's new in HP Service Manager9.41?5 DeprecationsWhat‘s new in HP Service Manager9.35?16 What's new in HP Service Manager9.40?22 DeprecationsWhat‘s new in HP Service Manager9.34?38 What’s new in HP Service Manager9.33?50 DeprecationsWhat’s new in HP Service Manager9.32?58 DeprecationsWhat’s new in HP Service Manager9.31?70 What’s new in HP Service Manager9.30?76 Send Documentation Feedback81What's new in HP Service Manager9.41? HP Service Manager9.41contains the following new and enhanced features.Parameters introduced or updated in Service Manager 9.41This release introduces the following new parameter.Additionally,the following previously hidden parameters are made public in this release.New JavaScript functions introduced in Service Manager9.41New RAD functions introduced in Service Manager 9.41DeprecationsAs of version9.41,the following functionality items are obsolete.What‘s new in HP Service Manager9.35? HP Service Manager9.35contains the following new and enhanced features.Parameters introduced or updated in Service Manager 9.34patches and in Service Manager9.35No parameters are introduced or updated in Service Manager9.35.The following table lists,in alphabetical order,parameters that are added in Service Manager9.34 patch releases.JavaScript global methods introduced in Service Manager9.35None.New JavaScript functions introduced in Service Manager9.35None.New RAD functions introduced in Service Manager 9.35None.What's new in HP Service Manager9.40? HP Service Manager9.40contains the following new and enhanced features.Parameters introduced or updated in Service Manager 9.40Service Manager9.40introduces or updates the following parameters.New JavaScript functions introduced in Service Manager9.40New RAD functions introduced in Service Manager 9.40DeprecationsAs of version9.40,the following functionality items are obsolete.What‘s new in HP Service Manager9.34? HP Service Manager9.34contains the following new and enhanced features.Parameters introduced or updated in Service Manager 9.33patches and in Service Manager9.34Service Manager9.34introduces or updates the following parameters.The following table lists,in alphabetical order,parameters that are added or updated in Service Manager9.33patch releases.JavaScript global methods introduced or updated in Service Manager9.33patches and in Service Manager 9.34New JavaScript functions introduced in Service Manager9.34None.New RAD functions introduced in Service Manager 9.34None.What’s new in HP Service Manager9.33? HP Service Manager9.33contains the following new and enhanced features.。
HP 用户指南.pdf_1701960613.2762368说明书
摘要本指南提供有关组件、网络连接、电源管理、安全性和备份等相关信息。
法律信息©Copyright 2021 HP Development Company, L.P.Bluetooth 是其所有人所拥有的商标，HP Inc. 已取得授权使用。
Intel、Celeron、Pentium 和 Thunderbolt 是 Intel Corporation 或其子公司在美国和/或其他国家/地区的商标。
Windows 是 Microsoft Corporation 在美国和/或其他国家/地区的注册商标或商标。
USB Type-C® 和 USB-C® 是 USB Implementers Forum 的注册商标。
DisplayPort™ 和 DisplayPort™ 徽标是 Video Electronics Standards Association (VESA) 在美国和其他国家/地区所有的商标。
Miracast® 是 Wi-Fi Alliance 的注册商标。
本文所含信息如有更改，恕不另行通知。
HP 产品和服务附带的明示保修声明中阐明了此类产品和服务的全部保修服务。
本文档中的任何内容均不构成任何额外保修。
HP 对本文档中出现的技术错误、编辑错误或遗漏之处不承担任何责任。
第一版：2022 年 1 月文档部件号：M99639-AA1产品通知本指南介绍大多数产品共有的功能。
您的计算机上可能未提供某些功能。
并非所有功能在所有 Windows 版本中都可用。
系统可能需要升级和/或单独购买硬件、驱动程序或 BIOS 更新，才能充分利用Windows 功能。
Windows 会自动更新，此功能始终处于启用状态。
需要高速 Internet 和Microsoft 帐户。
可能会收取 ISP 费用，在更新过程中可能还会有其他要求。
请参阅。
如果您的产品随附 Windows S 模式：Windows S 模式只能与Windows 的 Microsoft Store 中的应用程序配合使用。
HP笔记本计算机用户指南说明书
用户指南©Copyright 2014 Hewlett-Packard Development Company, L.P. Microsoft 和 Windows 是 Microsoft 公司集团在美国的注册商标。
本文档中包含的信息如有更改，恕不另行通知。
随 HP 产品和服务附带的明确有限保修声明中阐明了此类产品和服务的全部保修服务。
本文档中的任何内容均不应理解为构成任何额外保证。
HP 对本文档中出现的技术错误、编辑错误或遗漏之处不承担责任。
第 1 版：2014 年 11 月文档部件号：800889-AA1产品通告本指南介绍大多数机型的常用功能。
您的笔记本计算机上可能未提供某些功能。
并非所有版本的 Windows 中都提供所有功能。
该电脑可能需要升级和/或单独购买的硬件、驱动程序和/或软件才能充分利用 Windows 功能。
请转到 以获得详细信息。
要访问最新的用户指南，请转至/support，然后选择您所在的国家/地区。
选择驱动程序和下载，然后按照屏幕上的说明进行操作。
软件条款如果安装、复制、下载或以其他方式使用此笔记本计算机上预安装的任何软件产品，即表明您同意受 HP 最终用户许可协议 (EULA) 条款的约束。
如果您不接受这些许可条款，唯一的补救办法是在14 天内将全部产品（硬件和软件）原封不动地退回购买处，并依据经销商的退款政策获得全额退款。
如需了解任何其他信息，或要求按电脑价格全额退款，请与您的经销商联系。
目录1 获取信息 (1)2 安装您的电脑 (3)连接到 Internet（仅适用于部分型号） (4)3 导航该屏幕 (5)使用触摸手势 (5)使用键盘和鼠标 (5)4 保护您的电脑 (8)电脑的安全功能 (8)5 故障排除 (9)电脑无法启动 (9)电源 (10)屏幕（显示器）（仅适用于部分型号） (10)键盘和鼠标（带有连接线） (11)键盘和鼠标（无线） (11)扬声器和声音 (12)Internet 访问 (13)软件故障排除 (14)6 系统恢复 (16)选择系统恢复方法 (16)系统恢复选项 (16)恢复介质 (18)7 维护 (20)计划和任务 (20)清洁您的电脑 (21)8 使用 HP PC Hardware Diagnostics (UEFI) (23)将 HP PC Hardware Diagnostics (UEFI) 下载到 USB 设备 (23)iii9 规格 (24)操作规格 (24)10 支持信息 (25)如何获得帮助 (25)帮助信息的位置 (25)客户维修支持 (25)升级您的硬件之前 (26)索引 (27)iv1获取信息任务说明●安装您的电脑《装配说明》或《快速装配》示意图– 或 –请参阅第 3 页的安装您的电脑。
HP 打印机字体和符号集说明书
Chapter 12: Unbound Fonts and Downloaded Symbol Sets Contents of this Chapter•Introduction ................................................................................. 12-1•Unbound Font Operations ............................................................ 12-2•Downloading Symbol Sets ........................................................... 12-5•Managing User-Defined Symbol Sets ......................................... 12-11This chapter describes the following PCL commands:Symbol Set Code ................ Esc*c#R................................................... 12-5Download Symbol Set ........ Esc(f#W[symbol set definition] ................ 12-6Symbol Set Control ............ Esc*c#S................................................. 12-1112.1 IntroductionBound and Unbound FontsA bound font is restricted to a single symbol set. An unbound font contains the union of multiple symbol sets described by a Symbol Index such as Hewlett-Packard's Master Symbol List (MSL) or Unicode (TrueType). Unbound fonts typically contain 300, 400, or even more characters. Downloading Symbol SetsSymbol sets may be downloaded like fonts. Both customized and standard HP-supported symbol sets may be downloaded.12 - 2 Unbound Fonts and Downloaded Symbol Sets12.2 Unbound Font OperationsFont Selection and Unbound FontsWhen a font is requested, the printer selects an available font that most closely matches the current font selection characteristics ⎯ symbol set, spacing, pitch, height, style, stroke weight, and typeface. (See Chapter 9 for font selection.)Since the symbol set attribute has the highest priority, the printer first makes a list of all the available fonts ⎯ bitmap, bound, and unbound ⎯ that contain the requested symbol set. Bitmap and bound fonts are easily checked because they contain only one symbol set. However, to determine which unbound fonts match a symbol set, the printer must identify the appropriate symbol collections.Symbol CollectionsThe symbols in an unbound font can be divided into symbol collections that classify symbols according to language or application. The symbols in each collection do not change from one unbound font to another ⎯ that is, the Basic Latin collection always contains the same symbols. However, different fonts may contain different collections. For example, the internal Univers font in LaserJet IIIP contains the Latin, Math, and Semi-graphic collections, which together contain all the symbols required for the 35 symbol sets that Univers provides. On the other hand, the Dingbats font contains only the Dingbats collection, which contains all the symbols required for the five supported Dingbat symbol sets.Matching Unbound Fonts to Requested Symbol SetsThe Character Complement number, which is a 64-bit field in an unbound font definition (see Chapter 11), identifies the symbol collections contained in the font. Each bit in this field corresponds to a symbol collection. For example, if bit 63 is cleared, an unbound Intellifont contains the Basic Latin collection. If bit 31 is cleared, an unbound TrueType font contains ASCII.The Character Requirements number, which is a 64-bit number provided to the printer for each symbol set, identifies the character collections needed by the symbol set. The printer matches bit-by-bit the Character Requirements number for the requested symbol set with the Character Complement number of every unbound font in the printer.After matching the Character Complement number with the required symbol collections, the printer will contain a list of all fonts (bitmap, bound, and unbound) that support the requested symbol set. If no fonts are found for the requested symbol set, the printer continues with the font selection algorithm described in Chapter 9.Unbound Fonts and Downloaded Symbol Sets 12 - 3Summary of Symbol Set MatchingSymbol set matching for unbound fonts uses the following general procedure:1. The host requests a font through font attribute selection by updating the font attributetable.2. Since the symbol set attribute has the highest priority, the printer looks for the requestedsymbol set.3. The printer uses the Character Requirements number of the requested symbol set toidentify the symbol collections needed by the symbol set.4. The printer checks the Character Complement field of available fonts for symbolcollections that contain symbols in the requested symbol set.5. Fonts whose symbol collections together contain the necessary symbols are included inthe next round of attribute matching.Symbol set or point size are not specified when an unbound scalable font is downloaded. Designation by ID is equivalent to a PCL font select string containing parameters with fixed values (spacing, stroke weight, style, and typeface), but not point size and symbol set. To designate an unbound scalable font by ID, first select the desired symbol set and point size, and then select the font by ID.Symbol Indexes (MSL and Unicode)Symbol Indexes identify HP printer symbols by a unique number. Two symbol indexes are used for unbound fonts. Unbound Intellifonts use MSL (Master Symbol List) numbers; unbound TrueType fonts use Unicode numbers. Character collections differ between Intellifont and TrueType fonts.Since the printer identifies symbols by their Symbol Index Number (0-65535), but receives character codes (0-255), the printer has a symbol set mapping table for each available symbol set. Using this mapping, the printer identifies which indexed character will be printed for the requested character code. A partial mapping for Roman-8 set is shown below.12 - 4 Unbound Fonts and Downloaded Symbol SetsPrinting a CharacterAfter an unbound font has been selected and the printer receives a character code for printing, the printer must access the mapping table to get the Symbol Index Number for that character. The printer then searches the selected unbound font for the correct MSL or Unicode number and prints that character.For example, if Roman-8 is requested and the printer receives character code 254, the printer accesses the Roman-8 mapping table. In the Roman-8 mapping table, character code 254 is mapped to MSL number 191 or Unicode number 0x00b1, corresponding to the plus-over-minus symbol, which is then printed.Unbound Fonts and Downloaded Symbol Sets 12 - 512.3 Downloading Symbol SetsSymbol sets may be downloaded and used to bind an unbound font. The downloaded symbol set may be one of the standard HP-supported symbol sets listed in Chapter 9 that is not internal to the printer, or it may be a user-defined or modified symbol set. The following process is used to download a symbol set:1. Specify an identification number for the symbol set ⎯Esc*c#R.2.Download the symbol set definition ⎯Esc(f#W [data].3. Select the symbol set for printing ⎯Esc(ID.4. Delete the symbol set or designate it as permanent ⎯Esc*c#S.Symbol Set Identification: Before a symbol set can be downloaded or manipulated as an individual entity, it must be assigned a unique identification number. Esc*c#R designates an identification number prior to downloading the symbol set. An existing symbol set with this code is deleted at download.Symbol Set Definition: Esc(f#W downloads a group of symbol set attributes as well as a list that maps each symbol set character code to a character ID number by which the given character may be specified in unbound scalable fonts.Symbol Set Selection: After downloading the symbol set definition, the user may select the symbol set by Esc(ID.Symbol Set Management: Once a user-defined symbol set is downloaded, the Symbol Set Control command (Esc*c#S) can assign symbol sets as temporary or permanent, or delete them. Symbol Set Code Esc * c # r/RAssigns an identification code to a downloadable symbol set.Value(#) = Identification codeDefault = 0Range = 0 to 65535DEVICE NOTE: LJIIIP and 4 have an upper range of 32767, corresponding to 1023Z. They do not allow values above 1023Z for user-defined symbol sets.The Symbol Set Code is analogous to Font ID and Character Code. It is used to download and manage symbol sets.Any downloaded symbol set already associated with this code is deleted when the symbol set definition is received.The value (#) used for this command must match the Encoded Symbol Set Designator field in the downloaded symbol set definition.12 - 6 Unbound Fonts and Downloaded Symbol SetsThe Symbol Set Code is derived from the identification number (ID) used by Esc(ID in font selection:Symbol Set Code= (# * 32) + (L - 64)where # is the number portion of the ID, and L is the ASCII value of the letter portion. (See Chapter 9 for a list of symbol set IDs.)EXAMPLEAssume that a symbol set has an ID of 1Q, which will be used as a font select parameter byEsc(ID⎯ that is, Esc(1Q. The Symbol Set Code command for this symbol set would beEsc*c49R ⎯that is, (1 * 32) + (81 - 64) = 49.Then the Download Symbol Set command, Esc(#W, will create a symbol set with a symbol set code of 49. And the Symbol Set Control command (Esc*c#S) will execute the specified action for any symbol set with a symbol set code of 49.Download Symbol Set Esc ( f # W [symbol set definition]Defines the characters and character mapping for a downloaded symbol set.Value(#) = Number of bytes in symbol set definitionDefault = NARange = 0 to 32767 (command ignored if invalid definition or out-of-memory)This command must be sent subsequent to Symbol Set Code (Esc*c#R). The last symbol set code sent is used; if no code has been sent, the default (0) is assigned.A previously downloaded symbol set with the same symbol set code is deleted. An internal symbol set with the same code is overridden by the new symbol set.If the symbol set definition is invalid, if the Encoded Symbol Set Designator field of the definition does not match the symbol set code, or if there is insufficient memory to create the symbol set, the command is ignored and the symbol set discarded.Unbound Fonts and Downloaded Symbol Sets 12 - 7 The format for a downloaded symbol set definition is shown below:User-defined Symbol Set Definition FormatHeader Size (UINT16)Specifies the number of bytes in the header of the symbol set definition. This is the number of bytes preceding the Symbol Map.For a format 1 (MSL) symbol set definition, the header size must be 18 or greater; otherwise, the symbol set is invalidated.Encoded Symbol Set Designator (UINT16)This field must match the value designated by Symbol Set Code (Esc*c#R).Format (UBYTE)This field specifies the symbol index and format of the symbol set definition:Value Format1 MSL (Intellifont)3 Unicode (TrueType)Unrecognized values invalidate symbol set creation.DEVICE NOTE: LJIIIP recognizes only a format of 1.12 - 8 Unbound Fonts and Downloaded Symbol SetsSymbol set Type (UBYTE)Defines printable and unprintable codes for the symbol set:Value Symbol Set Organization0 7-bit (32-127 are printable)*1 8-bit (32-127 and 160-255 are printable)*2 PC-8 (All codes are printable except 0, 7 - 15, and 27)** All character code positions print in transparency mode.First Code (UINT16)Designates the first character code in the set. In a Format 1 or 3 symbol set, this value can be 0 to 255. The symbol set is invalid unless the First Code is less than or equal to the Last Code.Last Code (UINT16)Designates the last character code in the set. The value must be between 0 and 255 inclusive, and must not be smaller than the First Code.Together, the First Code through the Last Code identify the range of character codes that map to the Symbol Index numbers (characters) in the Symbol Map field.Character Requirements (Array of UBYTE)This 8-byte field, in conjunction with the Character Complement field in the unbound font definition, determines the compatibility of the unbound font to a symbol set. Each bit in the field represents a specific collection of symbols. Setting a bit to 1 indicates that collection is required; setting the bit to 0 indicates that collection is not required. (Bit 63 is the most significant bit of the first byte; bit 0 is the least significant bit of the 8-byte field.) A font and a symbol set are compatible only if the result of AND'ing the Character Complement field of the font definition with the Character Requirements field of the symbol set definition is 8 bytes of zero.Unbound Fonts and Downloaded Symbol Sets 12 - 9 As described below, Character Requirements differ between MSL-based symbol sets and Unicode-based symbol sets. Unbound Intellifonts are ordered in MSL numbers; unbound TrueType fonts are ordered in Unicode numbers.MSL Symbol Index Character RequirementsIndividually defined bits include:Unicode Symbol Index Character Complements12 - 10 Unbound Fonts and Downloaded Symbol SetsIndividually defined bits include:There are no invalid Character Requirements field values. Examples of values are:Symbol Map (Array of UINT16)Maps each character code to a symbol index number. The number of symbol index characters in the array must match the number of character codes in the range, First Code through Last Code. If no printable symbol is associated with a given character code (e.g., codes 128 through 160 of Roman-8), the corresponding entry in the Symbol Map is 65535 (0xffff).Unbound Fonts and Downloaded Symbol Sets 12 - 1112.4 Managing User-Defined Symbol Sets Symbol set management involves the same types of operations as font management: •Designating a symbol set temporary or permanent•Deleting a symbol setSymbol set management operations are performed on the symbol set designated by the current symbol set code (Esc*c#R).Symbol Set Control Esc * c # s/SDesignates user-defined symbol sets as permanent or temporary, or deletes them.Value(#) = 0 Delete all temporary and permanent user-defined symbol sets = 1 Delete all temporary user-defined symbol sets= 2 Delete current user-defined symbol set (last Symbol Set Codespecified)= 4 Make current user-defined symbol set temporary= 5 Make current user-defined symbol set permanentDefault = NARange = 0 to 2, 4, 5A downloaded symbol set is temporary by default. Internal symbol sets cannot be deleted or made temporary; however, a downloaded symbol set can overlay (redefine) an internal symbol set, but this is not recommended. An overlaying symbol set must be deleted to access an overlaid ROM-based symbol set. The priority scheme is (highest priority to lowest):1.Downloaded symbols set (lowest ID)2.Read/Write removeable disk (lowest ID)3.Read/Write removeable flash (lowest ID)4.Read/Write permanent disk (lowest ID)5.Read/Write permanent flash (lowest ID)6.Cartridge (lowest unit to highest unit)17.SIMM (lowest ID)8.Internal1 DEVICE NOTE: On LJIII the left cartridge has priority over the right cartridge. OnDeskJets below 1200, the back cartridge has priority over the front.12 - 12 Unbound Fonts and Downloaded Symbol Sets。
HP 笔记本电脑 驱动器 说明书
驱动器用户指南© Copyright 2009 Hewlett-Packard Development Company, L.P.Microsoft、Windows 和 Windows Vista 是Microsoft Corporation 在美国的注册商标。
本文档中包含的信息如有更改，恕不另行通知。
随 HP 产品和服务附带的明确有限保修声明中阐明了此类产品和服务的全部保修服务。
本文档中的任何内容均不应理解为构成任何额外保证。
HP 对本文档中出现的技术错误、编辑错误或遗漏之处不承担责任。
第 1 版：2009 年 3 月文档部件号：515639-AA1产品通告本用户指南介绍大多数机型常用的功能。
您的笔记本计算机上可能未提供某些功能。
目录1 取放驱动器2 使用光驱识别安装的光驱 (3)使用光盘 (4)选择正确的光盘（CD、DVD 和 BD） (5)CD-R 光盘 (5)CD-RW 光盘 (5)DVD±R 光盘 (5)DVD±RW 光盘 (5)LightScribe DVD+R 光盘 (5)蓝光光盘 (BD) (5)播放 CD、DVD 或 BD (7)配置自动播放 (8)更改 DVD 的国家/地区设置 (9)遵守版权警告 (10)复制 CD、DVD 或 BD (11)创建或“刻录”CD 或 DVD (12)取出 CD、DVD 或 BD (13)3 使用外接驱动器4 提高硬盘驱动器性能使用磁盘碎片整理程序 (15)使用磁盘清理程序 (15)5 更换硬盘驱动器托架中的硬盘驱动器6 故障排除光盘托盘打不开，无法取出 CD、DVD 或 BD (20)笔记本计算机检测不到光驱 (21)光盘无法播放 (22)光盘无法自动播放 (23)iii光盘刻录过程无法启动，或者在完成之前停止 (24)在 Windows Media Player 中播放的 DVD 没有声音或不显示图像 (25)必须重新安装设备驱动程序 (26)获取 Microsoft 设备驱动程序 (26)获取 HP 设备驱动程序 (26)索引 (28)iv1取放驱动器驱动器是容易损坏的计算机组件，取放时应格外小心。
HP电脑说明书
iv 安全警告通告
目录
1 使用入门 使用 HP QuickWeb（仅限某些机型） .................................................................................................. 2
2 了解部件 识别硬件 ............................................................................................................................................... 3 顶部组件 .............................................................................................................................. 3 触摸板 ................................................................................................................. 3 指示灯 ................................................................................................................. 4 按键 ..................................................................................................................... 5 前部组件 .............................................................................................................................. 5 右侧组件 .............................................................................................................................. 6 左侧组件 .............................................................................................................................. 7 显示屏组件 ........................................................................................................................... 8 底部组件 .............................................................................................................................. 9 取下盖罩 .............................................................................................................................. 9 装回盖罩 ............................................................................................................................ 11 无线天线 ............................................................................................................................ 12 其他硬件组件 ..................................................................................................................... 13 识别标签 ............................................................................................................................................. 13
PreSonus HP4 音频接口用户手册说明书
HP4Owner’s Manual®SPL Warning:Exposure to extremely high noise levels may cause permanent hearing loss. Individuals vary considerably in susceptibility to noise-induced hearing loss but nearly everyone will lose some hearing if exposed to sufficiently intense noise for a period of time. The U.S. Government’s Occupational Safety and Health Administration (OSHA) has specified the permissible noise level exposures shown in the following chart. Accordingto OSHA, any exposure in excess of these permissiblelimits could result in some hearing loss. To ensure against potentially dangerous exposure to high sound-pressure levels, it is recommended that all persons exposed to equipment capable of producing high sound-pressure levels use hearing protectors while the equipment is in operation. Earplugs or protectors in the ear canals or over the ears must be worn when operating the equipment in order to prevent permanent hearing loss if exposure is in excess of the limits set forth here:1Owner’s ManualOverview 1Summary of Features 1.11.0 Thank you for purchasing this PreSonus product.PreSonus Audio Electronics, Inc., has manufactured it using high-grade components to ensure optimum performance that will last a lifetime. The 150 mW headphone amps in the HP4 are loud enough to explode the oysters in a Po-Boy sandwich, yet the sound is clear and clean, with a wide dynamic range. The HP4 is loaded with professional features, such as a monitor output with level control and mute and a Mono summing switch for the headphone and monitor outputs.1.1 Summary of Features• 4 discrete headphone-level controls •Mono summing switch •Monitor level control •Monitor mute switch • 2 balanced ¼” line inputs•Daisy-chain multiple units or pass signal to studio monitors via monitor outputs• 4 stereo, ¼” headphone outputs• 2 impedance-balanced, ¼” line outputsWe encourage you to contact us with questions or comments regarding this product. You can reach us *******************************************1-225-216-7887 between 9 a.m. and 5 p.m. Central Time (GMT 05:00). PreSonus Audio Electronics is committed to constant product improvement, and we value your suggestions highly. We believe the best way to achieve our goal of constant product2PreSonus HP41 Overview1.1 Summary of Featuresimprovement is by listening to the real experts: our valued customers. We appreciate the support you have shown us through the purchase of this product. Please use this manual to familiarize yourself with the features, applications, and correct connection procedure for the HP4 before trying to connect it to your recording system. Pay close attention when connecting the HP4 to your system, as bad cables and improper grounding are the most commoncauses of problems encountered in recording and live P . A. environments. We recommend checking your cables, connections, and grounding if you experience any noise or other sonic performance problems.1.2 What Is In The BoxIn addition to this manual, your PreSonus package contains the following:• PreSonus HP4•16 VAC, 1,000 mA Power Supply3Owner’s ManualOverview 1What’s in the Box 1.12.0 This Quick Start guide is designed to help get yourHP4 connected to your system as quickly as possible. The following step-by-step instructions are based on a common studio environment. Your actual setup may change based on your needs and applications.2.1 Getting StartedConnect the Power1. Turn every knob on the front panel of the HP4 completely counterclockwise (left).2.Connect the included power supply to the HP4 and plug it in to a wall socket, power strip, or surge protector.Connect Your Input Sources1. Turn down the main output volume on your audio interface or mixer to its lowest position.2.Connect the main outputs of your audio interface or mixer to the Left and Right TRS inputs on the back of your HP4. For the best sound quality, PreSonus recommends us-ing balanced cables whenever possible.3.Connect the Left and Right Monitor/Thru outputs on the back of your HP4 to the inputs of your pow-ered studio monitors or power amp (if your studio monitors are passive). This will allow you to use a single output pair from your audio interface or mix-er to feed both your HP4 and your studio monitors.PreSonus HP42 Quick Start Guide2.1 Getting StartedSet Monitor Levels1. Connect a pair of headphones to the Phones 1 output.2. Play a CD, DAW session, or other audio record-ing that is typical of your studio productionsthrough your audio interface or mixer outputs.3. Turn the main output volume of your audio interfaceor mixer to unity gain. You may need to consultthe documentation that came with your device todetermine the knob or fader position for unity gain.4. Begin turning up the Phones 1 volume knobon the front panel of your HP4 until your head-phones are at a comfortable listening level.5. Begin turning up the Monitor Level knob onthe front panel of your HP4 until your studiomonitors are at a comfortable mixing level.Your HP4 is now ready to use!45Owner’s ManualQuick Start Guide2Getting Started 2.12.2 Hookup Diagrams2.2.1Using the same stereo source for multiple HP4s.PreSonus HP42 Quick Start Guide2.2 Hookup Diagrams2.2.2Connecting an HP4 and studio monitors to the same stereo source.67Owner’s ManualQuick Start Guide2Hookup Diagrams 2.23.03.1Front-Panel LayoutHeadphone Volume . The HP4 has the potential to be very loud. (It goes to 12; 11 is for wimps!)Please be careful when you first start passing sound through the unit. It is best to start with the volume set at 1 and then slowly bring up the volume.Note that the loudness of your headphones will vary depending on their design and their input impedance. The output impedance of the HP4 is 51Ω (ohms), and it will work fine with professional and consumer headphones but the volume will differ depending on which type of headphone you use. Headphones with lower input impedances will generally be louder than higher-impedance headphones. (In this case, louder does not mean better!) Most professional headphones have impedances between 150Ω and 600Ω. Consumer headphones for CD players and the like oftenhave impedances between 8Ω and 32Ω. Broadcast headphones are specialized, and you are unlikely to use them with an HP4; their impedances are typically between 1.5 kΩ (kilohms) and 2 kΩ.Mono button. When you press the Mono button, each input will be summed together on each output. For example, if you plug a CD player into the left input, and press the Mono button, the signal from the left input will be present in the left and right headphone channels and inthe master output. When the Mono button is8PreSonus HP43 Hardware3.1 Front Panel Layoutnot depressed, the left and right outputs will carry the left- and right-channel signals, respectively.Monitor Level. The Monitor Level knob controls the volume of the rear-panel outputs.Monitor Mute. The Monitor Mute button mutes the main rear-panel outputs, which is handy when you only want to use the front-panel headphone outputs. This is especially helpful when recording in front of a computer and studio monitors: you can simply mute the signal going to the monitors rather than turn down the Monitor Level.3.2Back-Panel LayoutLeft/Right Balanced Inputs. These line-levelinputs should only be used for signals from sources that do not require preamplification, such as CD and MP3 players, mixers, and audio interfaces.Left/Right Balanced Outputs (Monitor/Thru). These are the line-level outputs for the HP4. The MonitorLevel knob on the front of the unit controls their output level. These outputs can be used as a Monitor Thru or to connect another HP4 for additional headphone distribution. (See Section 2.1 for hookup diagrams.)9Owner’s ManualHardware 3Rear Panel Layout 3.24.04.1SpecificationsINPUTS:Connector Type ¼” TRS, balanced THD+N 0.0025%, 1 kHz, unity gain Max Input Level +18 dBu, <0.5% THD+N, unity gain Input Impedance 10 kΩFrequency Response20 Hz - 20 kHz, ±0.5 dBMONITOR OUTPUT:Connector Type ¼” TRS, impedance-balanced THD+N 0.0025%, 1 kHz, unity gain Max Output Level +18 dBu, <0.5% THD+N Output Impedance 51ΩFrequency Response20 Hz - 20 kHz, ±0.5 dBHEADPHONE OUTPUT:Connector Type ¼” TRS, stereoMax Output Power 130 mW/Ch, <0.5% THD+N, 60Ω loadFrequency Response20 Hz - 20 kHz, ±0.5 dB, 60Ω loadHeadphone Impedance Working Range32Ω – 600ΩPOWER:External Adapter Type+12 VDC, 1000 mA, center pin positiveNOTE: As a commitment to constant improvement, PreSonusAudio Electronics, Inc., reserves the right to change anyspecification stated herein at any time, without notification.PreSonus HP44 Resources4.1 Specifications4.2 Troubleshooting and RepairsIf you experience problems with your HP4,please try the following before contactingPreSonus Customer Support:1. Check our Web site at foranswers to frequently asked questions and fortroubleshooting techniques specific to the HP4.2. Make sure your HP4 and all equipmentconnected to it are powered on.3. Disconnect/reconnect your HP4 power supply.4. Check your connection cables and audio sources.5. Check your headphones.6. Isolate the problem by disconnecting anyextraneous equipment in your signal chain.To submit a tech-support request, visit our Web siteat /home or call us at1-225-216-7887 between 9 a.m. and 5 p.m. CentralTime (GMT 05:00). Please note that you must registeryour product at before contactingCustomer Service. Customers outside of the UnitedStates should check first with their regional PreSonusdistributor for technical support and repairs.When contacting technical support, pleasehave the following information at hand:• A brief description of the connectionsto and from your HP4.• A description of the problem that you are encountering.•Your HP4 serial number (located onthe bottom of the unit).If you think that your power supply has failed, rather1011Owner’s ManualResources 4Troubleshooting and Repairs 4.2than the HP4 itself, please let the CustomerService representative know. If your HP4 is still under warranty, a replacement power supply will be provided to you free of charge. If your HP4 is no longer under warranty, you may purchase a replacement at /store.PreSonus Audio Electronics, Inc., warrants this product to be free of defects in material and workmanship for a period of one year from the date of original retail purchase. This warranty is enforceable only by the original retail purchaser. To be protected by this warranty, the purchaser must complete and return the enclosed warranty card within 14 days of purchase. During the warranty period PreSonus shall, at its sole and absolute option, either repair or replace, free of charge, any product that proves to be defective on inspection by PreSonus or its authorized service representative. To obtain warranty service, the purchaser must first call or write PreSonus at the address andtelephone number printed below to obtain a Return Authorization Number and instructions of where to return the unit for service. All inquiries must be accompanied by a description of the problem. All authorized returns must be sent to the PreSonus repair facility postage prepaid, insured, and properly packaged. PreSonus reserves the right to update any unit returned for repair. PreSonus reserves the right to change or improve the design of the product at any time without prior notice. Thiswarranty does not cover claims for damage due to abuse, neglect, alteration, or attempted repair by unauthorized personnel and is limited to failures arising during normal use that are due to defects in material or workmanship in the product. Any implied warranties, including implied warranties of merchantability and fitness for a particular purpose,PreSonus HP44 Resources4.2 Troubleshooting and Repairsare limited in duration to the length of this limitedwarranty. Some states do not allow limitations on howlong an implied warranty lasts, so the above limitationmay not apply to you. In no event will PreSonus beliable for incidental, consequential, or other damagesresulting from the breach of any express or impliedwarranty, including, among other things, damage toproperty, damage based on inconvenience or on lossof use of the product, and, to the extent permittedby law, damages for personal injury. Some states donot allow the exclusion of limitation of incidental orconsequential damages, so the above limitation orexclusion may not apply to you. This warranty givesyou specific legal rights, and you may also have otherrights, which vary from state to state. This warrantyonly applies to products sold and used in the UnitedStates of America. For warranty information in allother countries, please refer to your local distributor.PreSonus Audio Electronics, Inc.7257 Florida Blvd.Baton Rouge, LA 70806 USA12Added bonus: PreSonus’ previously Top Secret recipe for…JambalayaIngredients:• 5 lbs link andouille sausage • 3 lbs boneless chicken • 2 lbs ground beef• 3 lbs onions (yellow or purple) • 2 stalks of celery• 1 lb bell peppers (green or red) • 1 batch green onions • 3 lbs rice•Tony Chachere’s Cajun Seasoning• 1 bottle chicken stock concentrate (or 3 cubes chicken bullion) • 1 can Rotel tomatoes with chilies, diced (regular hot)•Tabasco sauceCooking Instructions:1. In a 16 qt. pot or larger, slice link sausage and pan-fry until brown.2. Add ground beef and brown.3. Do not remove from pot Add diced onions, celery, and bell peppers, 1 can RotelOriginal diced tomatoes w/chilies, 3 oz concentrate chicken stock, ½ teaspoon of Cajun seasoning, 1 teaspoon of Tabasco hot sauce (or more…maybe lots more).4. Cook until onions are translucent.5. Add chicken and cook until it turns white.6. Add diced green onions, 1 tsp. salt, ½ gallon water and bring to a boil.7. Add rice and bring to a boil. Cook on high for 8 m inutes, covered, stirring every 2minutes8. Cook covered on low for 10 minutes, stirring only once.9. Turn off and let sit for 30 minutes.10. Serve and enjoy!Serves 20© 2018 PreSonus Audio Electronics, Inc. All Rights Reserved. AudioBox, DigiMax, FireStudio, Nimbit, PreSonus, QMix,StudioLive, and XMAX are trademarks or registered trademarks of PreSonus Audio Electronics, Inc. Capture, Impact, Mixverb Presence, RedLightDist, SampleOne, Studio One, and Tricomp are trademarks or registered trademarks of PreSonus Software Ltd. Mac, Mac OS, and Macintosh are registered trademarks of Apple, Inc., in the U.S. and other countries. Windows is a registered trademark of Microsoft, Inc., in the U.S. and other countries. Other product names mentioned herein may be trademarks of their respective companies. All specifications subject to change without notice... except the recipe, which is a classic.EMC Statement:NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and the receiver.• Connect the equipment into an outlet on a circuit different from that to which the receiveris connected.• Consult the dealer or an experienced radio/TV technician for help.CAUTION: Changes or modifications to this device not expresslyapproved by PreSonus Audio Electronics could void the user’s authority to operate the equipment under FCC rules.This apparatus does not exceed the Class A/Class B (whichever is applicable) limits for radio noise emissions from digital apparatus as set out in the radio interference regulations of the Canadian Department of Communications.ATTENTION — Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant las limites applicables aux appareils numériques de class A/de class B (selon le cas) prescrites dans le réglement sur le brouillage radioélectrique édicté par les ministere des communications du Canada.HP4Quick Start Guide®7257 Florida Boulevard • Baton Rouge,Louisiana 70806 USA • 。
hp 蓝卡使用说明
蓝卡系统集成方案使用指南(特别为惠普定制)北京易生创新科技有限公司.前言◎欢迎使用蓝卡！◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆※本手册所有的产品商标与产品名称均属于北京易生创新科技有限公司。
※本手册所有图形仅供参考，请您以实际软件界面为准。
※请您保护好您的蓝卡密码，如果密码遗失，请您告之购货渠道,否则我们无法为您提供服务。
※请您在做安装、移除、修改蓝卡操作时，备份好您的硬盘数据，如果数据丢失，本公司不予找回。
◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆蓝卡系统集成方案(以下简称蓝卡)是对局域网内计算机机房进行搭建、部署、维护的一种专用解决方案，集网络安装、数据恢复和网络更新功能于一身。
该方案广泛应用于学校机房、企事业单位或网吧等局域网环境，成为广大机房管理者的得力助手。
它以方便、快捷、安全的优势备受机房管理者的青睐。
◎质量保证及其升级说明蓝卡实行一年质保，其间本公司将竭诚为您提供主版本内的免费升级服务，升级后的版本和使用手册中的界面或内容有所出入的，请您以实际界面为准，如有需要解答的问题，请您及时联系我们的技术部门。
感谢您对本公司产品的厚爱！目录本手册阅读导航1.产品介绍 ............................................................................６1.1.产品说明......................................................................... ６1.2.功能简介......................................................................... ６1.3.支持的操作系统* ........................................................... ７1.4.支持的文件系统............................................................. ７2.快速开始指南 ....................................................................８2.1.选择安装方式（全新安装）......................................... ８2.2.安装操作系统和蓝卡驱动......................................... １１2.2.1.安装操作系统及应用软件................................ １１2.2.2.安装蓝卡驱动 ................................................... １２2.2.3.安装完成 ........................................................... １５2.3.网络拷贝、自动修改IP ............................................ １５2.3.1.网络拷贝 ........................................................... １６2.3.2.自动修改IP ....................................................... ２０3.计算机已经安装好操作系统安装蓝卡 ........................２３3.1.选择安装方式............................................................. ２３3.1.1.保留安装 ........................................................... ２３3.1.2.安装蓝卡系统驱动............................................ ２４3.1.3.网络拷贝 ........................................................... ２５3.1.4.自动修改IP ....................................................... ２５4.高级使用指南 ................................................................２６4.1.安装多个操作系统..................................................... ２６4.1.1.选择安装方式（全新安装）............................ ２６4.1.2.用蓝卡划分硬盘分区........................................ ２７4.1.3.安装操作系统及应用软件................................ ２９4.1.4.安装蓝卡驱动 ................................................... ２９4.1.5.网络拷贝、自动修改IP ................................... ２９4.2.Linux安装指南 .......................................................... ３０4.2.1.蓝卡分区界面 ................................................... ３０4.2.2.选择安装类型时，选择“定制”： .................. ３１4.2.3.磁盘分区设置请选择“用手工分区”。
快速规格 HP V194 18.5英寸显示器概述说明书
HP V194 18.5-inch Monitor1.Menu: Opens, selects or exits the OSD menu. 4.OK: If the OSD menu is on, press to select the highlighted menu item. Ifthe OSD menu is inactive, press to activate the auto adjustment featureto optimize the screen image.2.Minus "-": If the OSD menu is on, press tonavigate backward through the OSD menu anddecrease adjustment levels.5.Power: Turns the monitor on or off.3.Plus "+": Select input source. If the OSD menu ison, press to navigate forward through the OSD menu and increase adjustment levels. 6.Power LED: fully powered = green; sleep mode = amber; sleep timermode = flashing amber.(Multi-monitor support depends on your PC capability. Monitors, stands, keyboard, mouse and notebook are sold separately.)Use two HP V194 18.5-inch monitors with an HP Adjustable Dual Display Stand (AW664AA) for a small footprint, high productivity work solution.Part numbersV5E94AA / V5E94A6/ V5E94A8IntroductionGet quality presentation features at a price point that doesn’t break the bank with the HP V194 18.5-inch Monitor, a sleek, thin-profile monitor in a compact, space-saving screen size with an unbelievably low price point.Key Benefits∙Enjoy crisp, clear views of your documents and e-mail with 1366 x 768 resolution, 5M:1 dynamic contrast ratio, and 5 ms response time on an 18.5-inch diagonal screen.1 Quickly and easily connect to your devices with a VGA input.∙Mount your HP Desktop Mini 2602directly behind the display for an integrated, affordable workspace that’s perfect for small spaces. Or, use the integrated VESA mount to place the display on a wall or stand.2∙Reduce power consumption and help lower your costs with an intelligent, energy-efficient design that is ENERGY STAR® certified and EPEAT® Silver registered.3 The display also includes mercury-free display backlights and arsenic-free display glass.∙Customize your display’s position with adjustable tilt settings and viewing angles.∙Rest assured that your IT investment is supported by a three-year standard limited warranty. To extend your protection, select optional HP Care Packs.41.All performance specifications represent the typical specifications provided by HP's component manufacturers; actual performancemay vary either higher or lower.patible with HP Desktop Mini 260 G1 and G2, sold separately. HP Quick Release required and sold separately. Mounting hardwaresold separately. Options sold separately.3.EPEAT® registered where applicable. EPEAT registration varies by country. See for registration status in your country.4.Sold separately. Service levels and response times for HP Care Packs may vary depending on your geographic location. Service startson date of hardware purchase. Restrictions and limitations apply. For details, visit /go/cpc. HP Services are governed by the applicable HP terms and conditions of service provided or indicated to Customer at the time of purchase. Customer may haveadditional statutory rights according to applicable local laws, and such rights are not in any way affected by the HP terms andconditions of service or the HP Limited Warranty provided with your HP Product.Technical SpecificationsPanel Type TN with LED backlightViewable Image Area 46,99 cm (18.5 in) widescreen; diagonally measuredActive Area(W x H)40,98 x 23,04 cm (16.13 x 9.07 in)Aspect Ratio 16:9Viewing Angle(typical)Up to 90° horizontal/65° vertical (10:1 minimum contrast ratio)Brightness (typical)*200 cd/m2Contrast Ratio(typical)*600:1Dynamic ContrastRatio (typical)*5,000,000:1Response Rate(typical)*5 ms (on/off)Pixel Pitch 0.3 mmBacklight Lamp Life*(to half brightness)30K hours minimumColor Gamut*72% (typical)Color Support**Can display up to 16.7 million colors*All performance specifications represent the typical specifications provided by HP's component manufacturers;actual performance may vary either higher or lower.** With the use of FRC technology.On Screen Display (OSD) Buttons or Switches Menu, Minus ("-"), Plus ("+"), OK, PowerLanguages 10 (English, Spanish, German, French, Italian, Netherlands, Portuguese, Japanese, T-Chinese and S-Chinese)User Controls Brightness, Contrast, Color, Image Control, OSD control, Management, Language, Information, Factory ResetSignal Interface/ Performance Horizontal Frequency 30 to 80 kHz Vertical Frequency 50 to 60 HzNative Resolution 1366 x 768 @ 60 Hz Preset VESA GraphicModes (non-interlaced)1366 x 768 @ 60 Hz1280 x 720 @ 60 Hz1024 x 768 @ 60 Hz800 x 600 @ 60 Hz720 x 400 @ 70 Hz640 x 480 @ 60 Hz Maximum Pixel ClockSpeed110 MHzUser ProgrammableModesYes, 20Anti-Glare YesDefault ColorTemperature6500 KPlug and Play YesVideo/Other Inputs Input Signal VGAVideo Cable (1) VGA Video Cable Lengths 1,5 m (4.9 ft)Power Power Supply InternalInput Power 100 - 240 VAC (50/60 Hz)Typical PowerConsumption15 WMaximum 17 WPower Saving 0.5 WPower Cable Length 1,5 m (4.9 ft)Mechanical Dimensions (W x D xH) Unpacked w/stand 44,14 x 21,81 x 33,86 cm(17.38 x 8.59 x 13.33 in) Unpacked w/o stand(head only)44,14 x 4,54 x 27,77 cm(17.38 x 1.79 x 10.94 in) Packaged 55,4 x 10 x 34,6 cm(21.81 x 3.94 x 13.62 in)Weight Head Only 2,4 kg (5.07 lb)Unpacked 2,6 kg (5.73 lb)Packaged 3,7 kg (8.2 lb)Tilt Range -5° to + 22° verticalSwivel Range N/AHeight Adjustable N/APivot Rotation N/ABase DetachableEnvironmentalTemperature –Operating5° to 35° C (41° to 95° F)Temperature – Non-operating-20° to 60° C (-4° to 140° F)Humidity – Operating 20% to 80% non-condensingHumidity – Non-operating5% to 95%, 38.7° C max wet-bulbAltitude – Operating 0 to 5,000 m (0 to 16, 404 ft)Altitude – Non-operating0 to 12,192 m (0 to 40,000 ft)White LED Backlights YesCCFL Panel NoArsenic-Free DisplayGlassYesLow Halogen4NoMercury-Free DisplayBacklightingYesEnvironmental Data Eco-LabelCertifications &declarationsThis product has received or is in the process of being certified to the following approvalsand may be labeled with one or more of these marks:∙IT ECO declaration∙US ENERGY STAR®∙EPEAT® Gold registered in the United States. See forregistration status in your country.EnergyConsumption(in accordancewith USENERGY STAR®test method)115VAC, 60Hz 230VAC, 50Hz 100VAC, 60HzNormalOperation10.9 W 11.6 W 11.5 WSleep 0.27 W 0.35 W 0.27 WOff 0.24 W 0.25 W 0.23 WHeatDissipation*115VAC, 60Hz 230VAC, 50Hz 100VAC, 60HzNormalOperation37 BTU/hr 40 BTU/hr 39 BTU/hrSleep 1 BTU/hr 1 BTU/hr 1 BTU/hrOff 1 BTU/hr 1 BTU/hr 1 BTU/hr *NOTE: Heat dissipation is calculated based on the measured watts, assuming the service levelis attained for one hour.AdditionalInformation∙This product is in compliance with the Restrictions of Hazardous Substances (RoHS)directive - 2002/95/EC.∙This HP product is designed to comply with the Waste Electrical and ElectronicEquipment (WEEE) Directive – 2002/96/EC.∙This product is in compliance with California Proposition 65 (State of California; SafeDrinking Water and Toxic Enforcement Act of 1986).∙This product is in compliance with the IEEE 1680 (EPEAT) standard at the gold level,see ∙Plastics parts weighing over 25 grams used in the product are marked per ISO 11469and ISO1043.∙This product contains 0% post-consumer recycled plastic (by wt.)∙This product is 98.4% recycle-able when properly disposed of at end of life.PackagingMaterialsExternal: PAPER/Paper 392 gInternal: PLASTIC/EPS (Expanded Polystyrene) 122 gPLASTIC/EPE-Expanded Polyethylene 30 gPLASTIC/Other plastics unknown 3 g RoHSComplianceHewlett-Packard is committed to compliance with all applicable environmental laws andregulations, including the European Union Restriction of Hazardous Substances (RoHS)Directive. HP’s goal is to exceed compliance obligations by meeting the requirements of theRoHS Directive on a worldwide basis. By July 1, 2006, RoHS substances will be virtuallyeliminated (virtually = to levels below legal limits) for all HP electronic products subject to theRoHS Directive, except where it is widely recognized that there is no technically feasiblealternative (as indicated by an exemption under the EU RoHS Directive).Material Usage This product does not contain any of the following substances in excess of regulatory limits (refer to the HP General Specification for the Environment at/hpinfo/globalcitizenship/environment/pdf/gse.pdf):∙Asbestos∙Certain Azo Colorants∙Certain Brominated Flame Retardants – may not be used as flame retardants inplastics∙Cadmium∙Chlorinated Hydrocarbons∙Chlorinated Paraffins∙Formaldehyde∙Halogenated Diphenyl Methanes∙Lead carbonates and sulfates∙Lead and Lead compounds∙Mercuric Oxide Batteries∙Nickel – finishes must not be used on the external surface designed to be frequently handled or carried by the user.∙Ozone Depleting Substances∙Polybrominated Biphenyls (PBBs)∙Polybrominated Biphenyl Ethers (PBBEs)∙Polybrominated Biphenyl Oxides (PBBOs)∙Polychlorinated Biphenyl (PCB)∙Polychlorinated Terphenyls (PCT)∙Polyvinyl Chloride (PVC) – except for wires and cables, and certain retail packaginghas been voluntarily removed from most applications.∙Radioactive Substances∙Tributyl Tin (TBT), Triphenyl Tin (TPT), Tributyl Tin Oxide (TBTO)Packaging HP follows these guidelines to decrease the environmental impact of product packaging: ∙Eliminate the use of heavy metals such as lead, chromium, mercury and cadmium inpackaging materials.∙Eliminate the use of ozone-depleting substances (ODS) in packaging materials.∙Design packaging materials for ease of disassembly.∙Maximize the use of post-consumer recycled content materials in packagingmaterials.∙Use readily recyclable packaging materials such as paper and corrugated materials.∙Reduce size and weight of packages to improve transportation fuel efficiency.∙Plastic packaging materials are marked according to ISO 11469 and DIN 6120standards.End-of-life Management and Recycling Hewlett-Packard offers end-of-life HP product return and recycling programs in many geographic areas. To recycle your product, please go to: /go/reuse-recycle or contact your nearest HP sales office. Products returned to HP will be recycled, recovered or disposed of in a responsible manner.The EU WEEE directive (2002/95/EC) requires manufacturers to provide treatment information for each product type for use by treatment facilities. This information (product disassembly instructions) is posted on the Hewlett Packard web site at: /go/recyclers. These instructions may be used by recyclers and other WEEE treatment facilities as well as HP OEM customers who integrate and re-sell HP equipment.Hewlett-Packard Corporate Environmental Information For more information about HP’s commitment to the environment:Global Citizenship Report/hpinfo/globalcitizenship/gcreport/index.html Eco-label certifications/hpinfo/globalcitizenship/environment/productdesign/ecolabels.htmlISO 14001 certificates:/V2/GetDocument.aspx?docname=c04755842and/hpinfo/globalcitizenship/environment/pdf/cert.pdfOptions (sold separately)HP LCD Monitor Quick Release –Part number EM870AA1An easy-to-use, VESA-compliant, LCD monitor mounting solution thatallows you to quickly and securely attach an LCD monitor to a variety ofstands, brackets, arms or wall mounts. For more information, refer to thisproduct's QuickSpecs document.HP Business PC Security Lock Kit– Part number PV606AAAttaches to the rear of the PC with a six-foot steel cable that can be used tosecure a PC or peripherals such as mice, keyboards, monitors or USBsecurity devices to protect them against unauthorized removal byphysically connecting the system to an anchor point.HP Single Monitor Arm –Part number BT861AAThe flexible design of the HP Single Monitor Arm provides a seeminglyendless range of display adjustments with an amazing 13 inches of lift, 50degrees of tilt, and 360 degrees of pan and rotation – all at your fingertips-- helping you stay comfortable and productive throughout the day.HP Adjustable Dual DisplayStand – Part Number AW664AAPremium space-saving dual screen solution provides access to moremonitor real estate and makes it possible to manage multiple applicationssimultaneously. Weight adjustable for dual monitors from 17-24”. Rotatedisplays into portrait/landscape positions.What's in the box? Monitor and accessories HP V194 18.5-inch diagonal monitorAC power cord 1,5 m (4.9 ft)VGA cable 1,5 m (4.9 ft) Documentation Printed documentationOther User Guide Languages English, Latin America, B. Portuguese, Japanese, T. Chinese, S. Chinese,Korean, Bahasa Indonesian, Arabic, Czech, Danish, Finnish, French, Greek,German, Hungarian, Italian, Kazakh, Dutch, Norwegian, Polish, Portuguese,Russian, Swedish, Slovenian, Spanish, Turkish, Hebrew.Warranty Languages English, Latin America, B. Portuguese, Japanese, T. Chinese, S. Chinese,Korean, Bahasa Indonesian, Arabic, Czech, Danish, Finnish, French, Greek,German, Hungarian, Italian, Kazakh, Dutch, Norwegian, Polish, Portuguese,Russian, Swedish, Slovenian, Spanish, Turkish, Hebrew.Bezel Color BlackVESA External Mounting Yes, one set of standard 4-hole pattern, 100 mm.Security Lock-Ready Yes, one security lock slot available Country of Origin ChinaCertifications and Compliance EPEAT® Silver (select regions)3, ENERGY STAR® qualified, CE, CB, KC, KCC, NOM, PSB, ICES, TUV-S,CCC, CECP, EPA, ISC, VCCI, FCC, ETL, TUV-GS, TUV, Taiwan: BSMI, China Energy Label (CEL) Grade 1, SmartWay - NA onlyCompatibility Compatible with platforms using the VESA standard video modes. Recommended for use with HP products.Service and Warranty Protected by HP, including up to a 3 year standard limited warranty*. Optional Care Pack Services are extended service contracts which go beyond your standard warranties.2*Warranty term may vary by region.1. The HP Quick Release has been designed to support a maximum of up to 24 lbs (10.9 kg) for all devices mounted. Because mounting surfaces vary widely and the final mounting method and configuration may vary, mounting fasteners are not supplied (other than the VESA-compliant screws). HP recommends that you consult with a qualified engineering, architectural or construction professional to determine the appropriate type and quantity of mounting fasteners required for your application and to ensure that your mounting solution is properly installed to support applied loads.2. Service levels and response times for HP Care Pack Services may vary depending on your geographic location. Service starts from date of hardware purchase. Restrictions and limitations apply. See /go/cpc for details..3. EPEAT® Silver where HP registers commercial display products. See for registration status in your country.4. External power supplies, power cords, cables and peripherals are not Low Halogen. Service parts obtained after purchase may not be Low Halogen.Copyright © 2016 HP Development Company, L.P.ENERGY STAR is a registered mark owned by the U.S. government. The information contained herein is subject to change without notice. The only warranties for HP products are set forth in the express limited warranty statements accompanying such products. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.Change Log Summary of ChangesDate of change: VersionHistory:Description of change: V1 to V2。
HP ProLiant服务器系列产品Service Pack 2014.09说明书
Service Pack for ProLiant - 2014.09 HP BL Servers
HP ProLiant BL685c G7 HP ProLiant BL685c G6 HP ProLiant BL680c G7 HP ProLiant BL660c Gen8 HP ProLiant BL620c G7 HP ProLiant BL495c G6 HP ProLiant BL490c G7 HP ProLiant BL490c G6 HP ProLiant BL465c Gen8 HP ProLiant BL465c G7 HP ProLiant BL465c G6 HP ProLiant BL460c Gen9 HP ProLiant BL460c Gen8 HP ProLiant BL460c G7 HP ProLiant BL460c G6 HP ProLiant BL420c Gen8 HP ProLiant BL280c G6 HP ProLiant BL2x220c G7 HP ProLiant BL2x220c G6 HP ProLiant WS460c Gen8 Graphics Server Blade
Driver - Chipset HP ProLiant PCI-express Power Management Update for Windows, v1.3.0.0 (D)
Driver - Lights-Out Management HP ProLiant Integrated Lights-Out Management Interface Driver for Windows Server 2012, v1.18.0.0 HP ProLiant Integrated Lights-Out Management Interface Driver for Windows Server 2003/2008 x64 Editions, v1.16.0.0 (F) HP ProLiant Integrated Lights-Out Management Interface Driver for Windows Server 2003/2008, v1.16.0.0 (F)