美泰玩具技术咨询(深圳)有限公司

No. 088 Mattel Toys Technical Consultancy (SZ) Ltd. – PI Lab美泰玩具技術咨詢(深圳)有限公司 – 品質檢定實驗室ADDRESS 地址: 5-6/F, #6 Building Hang Sang Chong Industrial Center, No. 107, Fu Kang Road, Heng Gang Town, Lang Gang District, Shenzhen City, Guang Dong Province, China 中國廣東省深圳市龍崗區橫崗鎮富康路107號恒生昌工業中心六棟5-6樓AUTHORISED REPRESENTATIVE 委任代表:Mr. CHUI Kam Tong, Senior Manager 徐錦棠先生，高級經理ENQUIRY 查詢:Mr. CHUI Kam Tong, Senior Manager 徐錦棠先生，高級經理Tel 電話 :3185 5156Fax 傳真:3185 5153E-mail 電郵:KT.Chui@CLIENTELE 服務對象: Conditionally available for public testing 有限度公眾服務ACCREDITED TESTCATEGORIES認可測試類別: Toys and Children’s Products玩具及兒童產品SCOPE OFACCREDITATION認可範圍: As shown on the following pages 詳見後頁* * * * * * * *Mattel Toys Technical Consultancy (SZ) Ltd. – PI Lab美泰玩具技術咨詢(深圳)有限公司 – 品質檢定實驗室TEST CATEGORY 測試類別ITEMS, MATERIALSOR PRODUCTS TESTED測試項目、材料或產品SPECIFIC TESTS ORPROPERTIES MEASURED特定測試或量度的特性SPECIFICATION, STANDARD METHODOR TECHNIQUE USED規範、標準方法或應用技術TOYS andCHILDREN'S Chemical tests :-PRODUCTS玩具及兒童產品All toys - paints and similar ASTM F963-08 4.3.5surface coating materials - Total lead content Clause 4.3.5.1Test procedures for compliance testing :CPSC Test Method: CPSC-CH-E1003-09Standard Operating Procedure for Determining Lead(Pb) in Paint and Other Similar Surface Coatings,April 26, 2009<Excluding the following>Compositetesting- Soluble elements Clause 4.3.5.2antimony, arsenic, chromium, selenium,cadmium, mercury, barium, leadToys and other articles US Public Law 110 -314 (HR4040)intended for use by Consumer Product Safety Improvement Act 2008children – paint and other US 16 CFR Part 1303similar surface-coating - Total lead content Test procedures for compliance testing :materials CPSC Test Method: CPSC-CH-E1003-09Standard Operating Procedure for Determining Lead(Pb) in Paint and Other Similar Surface Coatings,April 26, 2009<Excluding the following>CompositetestingToys - Migration of the elements EN 71-3: 1994 + A1: 2000 + AC: 2002antimony, arsenic, chromium, selenium, AS/NZS ISO 8124.3: 2003cadmium, mercury, barium, lead ISO 8124-3: 1997Toys - Migration of the elements GB 6675-2003 & A1: 2005, Clause 4.3 & Annex C玩具Antimony, Arsenic, Barium, Cadmium,Chromium, Lead, Mercury, Selenium特定元素的遷移銻, 砷, 鋇, 鎘, 鉻, 鉛, 汞, 硒Mattel Toys Technical Consultancy (SZ) Ltd. – PI Lab美泰玩具技術咨詢(深圳)有限公司 – 品質檢定實驗室TEST CATEGORY 測試類別ITEMS, MATERIALSOR PRODUCTS TESTED測試項目、材料或產品SPECIFIC TESTS ORPROPERTIES MEASURED特定測試或量度的特性SPECIFICATION, STANDARD METHODOR TECHNIQUE USED規範、標準方法或應用技術TOYS andCHILDREN'S Electrical tests :-PRODUCTS(cont’d) Battery operated toys - Battery operated toys safety tests ASTM F963-07 Clauses 4.25 and 8.18玩具及兒童產品電池動力玩具電池動力玩具安全測試<Excluding the following>(續上) 4.25.10AS/NZS ISO 8124.1: 2002 + Amdt.1 Annex AGB 6675-2003 + A1 Annex A.AElectric toys supplied at - Compliance inspection and safety tests EN 50088: 1996 + A1 + A2 + A3 + A4extra-low voltage 安全測試< Excluding the following >電玩具Clauses 11.1 (IP tests to EN 60529)16 (component tests to other standards),19.2.2 (burning test to other standards) and20 (radiation tests);Annexes C, E, G and IIEC 62115: 2003 + A1< Excluding the following >Clauses 11.1 (IP tests to IEC 60529),16(component tests to other standards),19.2.2 (burning test to other standards) and20 (radiation tests);Annexes B, C and EEN 62115: 2005< Excluding the following >Clauses 11.1 (IP tests to IEC 60529),16(component tests to other standards),19.2.2 (burning test to other standards) and20 (radiation tests);Annexes B, C and EGB 19865-2005< Excluding the following不包含>Clauses 11.1 (IP tests to GB 4208),16 (component tests to other standards),19.2.2(burning tests to other standards),20 (radiation tests);Annexes B, C and E11.1 (耐水測試),16 (按其他標準的元件測試),19.2.2 (按其他標準的燃燒測試),20 (輻射試驗)附錄 B 及C及 EMattel Toys Technical Consultancy (SZ) Ltd. – PI Lab美泰玩具技術咨詢(深圳)有限公司 – 品質檢定實驗室TEST CATEGORY 測試類別ITEMS, MATERIALSOR PRODUCTS TESTED測試項目、材料或產品SPECIFIC TESTS ORPROPERTIES MEASURED特定測試或量度的特性SPECIFICATION, STANDARD METHODOR TECHNIQUE USED規範、標準方法或應用技術TOYS andCHILDREN'S Toys Flammability tests AS/NZS ISO 8124.2: 2002PRODUCTS ISO 8124-2: 1994(cont’d) <Excluding the following>玩具及兒童產品for the above two standards(續上) Tests for cellulose nitrate, flammable gases,extremely flammable liquids,highly flammable liquids and flammable liquids;surface flash testEN 71-2: 2003<Excluding the following>Tests for cellulose nitrate, flammable gasesextremely flammable liquids,highly flammable liquids, flammable liquids,flammable gels and highly flammable solids;surface flash testISO 8124-2: 2007EN 71-2: 2006 + A1<Excluding the following>For the above two standardsTests for cellulose nitrate, flammable gaseshighly flammable liquids, flammable liquids,flammable gels and highly flammable solids;surface flash testASTM F963-07 (e1) 4.2< Excluding the following >Test to 16 CFR 1610Toys Flammability tests GB 6675-2003 with amendment no. 1玩具燃燒性能測試Clause 4.2 & Annex B不包含:亞硝酸纖維、易燃氣體、極度易燃液體、高度易燃液體、易燃液體、易燃固體及表面閃燃效應測試Mattel Toys Technical Consultancy (SZ) Ltd. – PI Lab美泰玩具技術咨詢(深圳)有限公司 – 品質檢定實驗室TEST CATEGORY 測試類別ITEMS, MATERIALSOR PRODUCTS TESTED測試項目、材料或產品SPECIFIC TESTS ORPROPERTIES MEASURED特定測試或量度的特性SPECIFICATION, STANDARD METHODOR TECHNIQUE USED規範、標準方法或應用技術TOYS andCHILDREN'S Physical and mechanical tests :- (cont’d)PRODUCTS(cont’d) Toys ASTMF963-07(e1) 玩具及兒童產品(續上) Safety requirements :- Material quality 4.1<Excluding the following>Examination of reprocessed materials to 4.3.1- Sound producing toys 4.5 (with modification by using sound level metercomplying with the specifications ofIEC 60651 and IEC 60804)<Excluding the following>Push and pull toys and toys using percussion caps- Small objects 4.6<Excluding the following>4.6.2- Accessible edges 4.7- Projections 4.8- Accessible points 4.9- Wires or rods 4.10- Nails and fasteners 4.11- Packaging film 4.12<Excluding the following>Sheeting with an average thickness of lessthan 0.00150 in- Folding mechanisms & hinges 4.13- Cords, straps and elastics 4.14<Excluding the following>4.14.4- Stability and over-load requirements 4.15- Wheels, tires & axles 4.17- Holes, clearance and accessibility of 4.18mechanisms- Simulated protective devices 4.19- Projectile toys 4.21- Teethers and teething toys 4.22- Rattles 4.23- Squeeze toys 4.24- Toys intended to be attached to a crib or 4.26Playpen- Stuffed and beanbag-type toys 4.28- Stroller and carriage toys 4.29- Balloons 4.32- Certain toys with spherical ends 4.33- Marbles 4.34- Balls 4.35- Pompoms 4.36- Hemispheric-shaped objects 4.37Mattel Toys Technical Consultancy (SZ) Ltd. – PI Lab美泰玩具技術咨詢(深圳)有限公司 – 品質檢定實驗室TEST CATEGORY 測試類別ITEMS, MATERIALSOR PRODUCTS TESTED測試項目、材料或產品SPECIFIC TESTS ORPROPERTIES MEASURED特定測試或量度的特性SPECIFICATION, STANDARD METHODOR TECHNIQUE USED規範、標準方法或應用技術TOYS andCHILDREN'S Physical and mechanical tests :- (cont’d)PRODUCTS(cont’d) Toys (cont’d) ASTMF963-07(e1) 玩具及兒童產品(續上) - Labeling requirements 5- Instructional literature 6- Producer’s markings 7- Test methods 8AS/NZS ISO 8124.1: 2002 + Amdt. 1Requirements:- Normal use 4.1- Reasonably foreseeable abuse 4.2- Material 4.3<Excluding the following>4.3.2- Small parts 4.4- Shape, size and strength of certain toys 4.5- Edges 4.6- Points 4.7- Projections 4.8- Metal wires and rods 4.9- Plastic film or plastic bags in packaging and 4.10in toys <Excluding the following>4.10b- Cords and elastics 4.11<Excluding the following>4.11.7- Folding mechanisms 4.12- Holes, clearances and accessibility of 4.13mechanisms- Springs 4.14- Stability and overload requirements 4.15- Simulated protective equipments such as 4.17helmets, hats and goggles- Projectile toys 4.18<Excluding the following>Bow and arrows- Aquatic toys 4.19- Liquid-filled toys 4.24- Mouth-actuated toys 4.25<Excluding the following>4.25c- Toy roller skates and toy skateboards 4.26- Test methods 5Mattel Toys Technical Consultancy (SZ) Ltd. – PI Lab美泰玩具技術咨詢(深圳)有限公司 – 品質檢定實驗室TEST CATEGORY 測試類別ITEMS, MATERIALSOR PRODUCTS TESTED測試項目、材料或產品SPECIFIC TESTS ORPROPERTIES MEASURED特定測試或量度的特性SPECIFICATION, STANDARD METHODOR TECHNIQUE USED規範、標準方法或應用技術TOYS andCHILDREN'S Physical and mechanical tests :- (cont’d)PRODUCTS(cont’d) Toys (cont’d) ISO 8124-1: 2000 + A1 + A2玩具及兒童產品(續上) Requirements:- Normal use 4.1- Reasonably foreseeable abuse 4.2- Material 4.3<Excluding the following>4.3.2- Small parts 4.4- Shape, size and strength of certain toys 4.5- Edges 4.6- Points 4.7- Protruding parts 4.8- Metal wires and rods 4.9- Plastic film or plastic bags in packaging and 4.10in toys <Excluding the following>4.10b- Cords and elastics 4.11<Excluding the following>4.11.7- Folding mechanisms 4.12- Holes, clearances and accessibility of 4.13mechanisms- Springs 4.14- Stability and overload requirements 4.15- Simulated protective equipments such as 4.17helmets, hats and goggles- Projectile toys 4.18<Excluding the following>Bow and arrows- Aquatic toys 4.19- Liquid-filled toys 4.24- Mouth-actuated toys 4.25<Excluding the following>4.25c- Toy roller skates and toy skateboards 4.26-Acousticrequirements 4.28(with modification by using sound level metercomplying with the specifications ofIEC 60651 and IEC 60804)<Excluding the following>Push and pull toys and toys using percussion caps- Test methods 5- Safety labeling guidelines and Annex Bmanufacturer’s markingsMattel Toys Technical Consultancy (SZ) Ltd. – PI Lab美泰玩具技術咨詢(深圳)有限公司 – 品質檢定實驗室TEST CATEGORY 測試類別ITEMS, MATERIALSOR PRODUCTS TESTED測試項目、材料或產品SPECIFIC TESTS ORPROPERTIES MEASURED特定測試或量度的特性SPECIFICATION, STANDARD METHODOR TECHNIQUE USED規範、標準方法或應用技術TOYS andCHILDREN'S Physical and mechanical tests :- (cont’d)PRODUCTS(cont’d) Toys (cont’d) EN 71-1: 1998 + A1 + A2 + A4 + A5 + A6 + A7 + A8玩具及兒童產品+ A9 + A10 + A11(續上)General requirements:- Material 4.1- Assembly 4.2- Flexible plastic sheeting 4.3<Excluding the following>4.3b- Toy bags 4.4- Glass 4.5- Edges 4.7- Points and wires 4.8- Protruding parts 4.9- Parts moving against each other 4.10- Mouth-actuated toys 4.11<Excluding the following>4.11c-Balloons 4.12-Enclosures 4.14<Excluding the following>4.14.1- Toys intended to bear the mass of a child 4.15<Excluding the following>4.15.1.4, 4.15.1.5, 4.15.2, 4.15.3, 4.15.5 and 4.15.6.6- Heavy immobile toys 4.16- Projectiles 4.17<Excluding the following>4.17.4- Aquatic toys 4.18- Acoustics 4.20<Excluding the following>Toys with earphones or headphones,push and pull toys and toys using percussion caps- Small balls 4.22Mattel Toys Technical Consultancy (SZ) Ltd. – PI Lab美泰玩具技術咨詢(深圳)有限公司 – 品質檢定實驗室TEST CATEGORY 測試類別ITEMS, MATERIALSOR PRODUCTS TESTED測試項目、材料或產品SPECIFIC TESTS ORPROPERTIES MEASURED特定測試或量度的特性SPECIFICATION, STANDARD METHODOR TECHNIQUE USED規範、標準方法或應用技術TOYS andCHILDREN'S Physical and mechanical tests :- (cont’d)PRODUCTS(cont’d) Toys (cont’d) EN 71-1: 1998 + A1 + A2 + A4 + A5 + A6 + A7 + A8玩具及兒童產品+ A9 + A10 + A11(續上)Toys intended for children under 36 months:- General requirements 5.1- Filling materials 5.2- Adhesion of plastic sheeting 5.3- Cords on toys 5.4- Liquid filled toys 5.5- Glass and porcelain 5.8- Shape and size of certain toys 5.9- Toys comprising monofilament fibres 5.10- Small balls 5.11- Play figures 5.12- Hemispheric shaped toys 5.13- Suction cups 5.14- Packaging6- Warning and instructions for use7- Test methods8Mattel Toys Technical Consultancy (SZ) Ltd. – PI Lab美泰玩具技術咨詢(深圳)有限公司 – 品質檢定實驗室TEST CATEGORY 測試類別ITEMS, MATERIALSOR PRODUCTS TESTED測試項目、材料或產品SPECIFIC TESTS ORPROPERTIES MEASURED特定測試或量度的特性SPECIFICATION, STANDARD METHODOR TECHNIQUE USED規範、標準方法或應用技術TOYS andCHILDREN'S Physical and mechanical tests :- (cont’d)PRODUCTS(cont’d) Toys (cont’d) EN 71-1: 2005 + A6玩具及兒童產品(續上) General requirements:- Material 4.1- Assembly 4.2- Flexible plastic sheeting 4.3<Excluding the following>4.3b- Toy bags 4.4- Glass 4.5- Edges 4.7- Points and wires 4.8- Protruding parts 4.9- Parts moving against each other 4.10- Mouth-actuated toys 4.11<Excluding the following>4.11c-Balloons 4.12-Enclosures 4.14<Excluding the following>4.14.1- Toys intended to bear the mass of a child 4.15<Excluding the following>4.15.1, 4.15.1.6, 4.15.2 and 4.15.5.5- Heavy immobile toys 4.16- Projectiles 4.17<Excluding the following>4.17.4- Aquatic toys 4.18- Acoustics 4.20(with modification by using sound level metercomplying with the specifications ofIEC 60651 and IEC 60804)<Excluding the following>Toys with earphones or headphones,push and pull toys, toys using percussion caps- Small balls 4.22Mattel Toys Technical Consultancy (SZ) Ltd. – PI Lab美泰玩具技術咨詢(深圳)有限公司 – 品質檢定實驗室TEST CATEGORY 測試類別ITEMS, MATERIALSOR PRODUCTS TESTED測試項目、材料或產品SPECIFIC TESTS ORPROPERTIES MEASURED特定測試或量度的特性SPECIFICATION, STANDARD METHODOR TECHNIQUE USED規範、標準方法或應用技術TOYS andCHILDREN'S Physical and mechanical tests :- (cont’d)PRODUCTS(cont’d) Toys (cont’d) EN 71-1: 2005 + A6 玩具及兒童產品(續上) Toys intended for children under 36 months:- General requirements 5.1- Filling materials 5.2- Plastic sheeting 5.3- Cords on toys 5.4- Liquid filled toys 5.5- Glass and porcelain 5.7- Shape and size of certain toys 5.8- Toys comprising monofilament fibres 5.9- Small balls 5.10- Play figures 5.11- Hemispheric shaped toys 5.12- Suction cups 5.13- Packaging6- Warning and instructions for use7- Test methods8Mattel Toys Technical Consultancy (SZ) Ltd. – PI Lab美泰玩具技術咨詢(深圳)有限公司 – 品質檢定實驗室TEST CATEGORY 測試類別ITEMS, MATERIALSOR PRODUCTS TESTED測試項目、材料或產品SPECIFIC TESTS ORPROPERTIES MEASURED特定測試或量度的特性SPECIFICATION, STANDARD METHODOR TECHNIQUE USED規範、標準方法或應用技術TOYS andCHILDREN'S Physical and mechanical tests :- (cont’d)PRODUCTS(cont’d) Toys (cont’d) GB 6675-2003 with amendment no. 1 玩具及兒童產品 Technical requirements 技術要求(續上) - Normal use 正常使用 4.1.1 / A.4.1- Reasonably foreseeable abuse 4.1.2 / A.4.2可預見的合理濫用- Material 材料 4.1.3 / A.4.3<Excluding the following 不包含>4.1.3b / A4.3.2- Small parts 小零件 4.1.4 / A.4.4- Shape, size and strength of certain toys 4.1.5 / A.4.5某些特定玩具的形狀、尺寸及強度- Edges 邊緣 4.1.6 / A.4.6- Points 尖端 4.1.7 / A.4.7- Projections 突出物 4.1.8 / A.4.8- Metal wires and rods 金屬絲和杆件 4.1.9 / A.4.9- Plastic film or plastic bags in packaging 4.1.10 / A.4.10and in toys <Excluding the following 不包含>用於包裝或玩具中的塑膠袋或塑膠 4.1.10b / A4.10b薄膜- Cords and elastics 繩索和彈性繩 4.1.11 / A.4.11<Excluding the following 不包含>4.1.11g / A4.11.7- Folding mechanisms 折疊機構 4.1.12 / A.4.12- Holes, clearances and accessibility of 4.1.13 / A.4.13mechanisms孔、間隙、機械裝置的可觸及性- Springs 彈簧 4.1.14 / A.4.14- Stability and overload requirements 4.1.15 / A.4.15穩定性和超載要求- Simulated protective equipment such as 4.1.17 / A.4.17helmets, hats and goggles仿製防護玩具(頭盔、帽子、護目鏡)- Projectile toys 彈射玩具 4.1.18 / A.4.18<Excluding the following 不包含>Bows and arrows 弓和箭- Aquatic toys 水上玩具 4.1.19 / A.4.19- Liquid-filled toys 液體填充玩具 4.1.24 / A.4.24- Mouth-actuated toys 口動玩具 4.1.25 / A.4.25<Excluding the following 不包含>4.1.25c / A4.25c- Toy roller skates and toys skateboards 4.1.26 / A.4.26玩具旱冰鞋及玩具滑板- Test methods 測試方法 A.5.1Mattel Toys Technical Consultancy (SZ) Ltd. – PI Lab美泰玩具技術咨詢(深圳)有限公司 – 品質檢定實驗室TEST CATEGORY 測試類別ITEMS, MATERIALSOR PRODUCTS TESTED測試項目、材料或產品SPECIFIC TESTS ORPROPERTIES MEASURED特定測試或量度的特性SPECIFICATION, STANDARD METHODOR TECHNIQUE USED規範、標準方法或應用技術TOYS andCHILDREN'S Physical and mechanical tests :- (cont’d)PRODUCTS(cont’d) Toys (cont’d) - Labeling and instructions for use GB6675-2003 with amendment no. 1 Clause 4.4 玩具及兒童產品玩具標識和使用說明(續上)- Instructions for use of toys GB 5296.5-2006玩具使用說明Small parts intended for use - Labeling requirement 16 CFR 1500.19by children above 3 years ofageToys - Technical requirements for determining a 16 CFR 1500.48sharp point in toys intended for use bychildren under 8 years of age- Technical requirements for determining a 16 CFR 1500.49sharp metal or glass edge in toys intendedfor use by children under 8 years of age- Test methods for simulating use and abuse 16 CFR 1500.50, 1500.51, 1500.52 and 1500.53of toys intended for use by children- Impact test- Bite test- Flexure test-Torquetest-Tensiontest- Compression testToys and other articles - Method for identifying choking, aspiration,16 CFR 1501 in conjunction withintended for use by children or ingestion hazards because of small parts test methods specified in 16 CFR 1500.51 orunder 3 years of age 16 CFR 1500.52 [excluding bite test to1500.51(c) or 1500.52 (c)]Infant rattles - Method for identifying choking and/or 16 CFR 1510 in conjunction withsuffocation hazards test methods specified in 16 CFR 1500.51[excluding bite test to 1500.51(c) andflexure test to 1500.51 (d)]。