重金属螯合剂明细

合集下载

不同pH值条件下螯合剂对铁、钙、镁等离子的螯合常数

不同pH值条件下螯合剂对铁、钙、镁等离子的螯合常数

不同pH值条件下螯合剂对铁、钙、镁等离子的螯合常数一,螯合分散剂用途纺织工业:1,退浆在退浆液中添加螯合剂,不管使用哪种退浆方法,可使退浆效率大大提高。

这是因为它把与浆料反应的金属离子络合以后,提高了浆膜的可溶胀性,也提高了浆料与退浆剂的可反应性,从而很容易从织物上去除。

2,前处理主要用作双氧水漂白的稳定剂,控制双氧水缓慢平稳的分解,提高双氧水利用率;同时防止金属离子导致的局部剧烈分解,引起织物纤维断裂形成破洞。

3,染色染色过程使用的水、芒硝、纯碱、氯化钠等都含有一定的杂质,在杂质的影响下,染料会引起沉淀。

特别是鲜艳的色系染色时,加入螯合剂可使色泽更加鲜艳,而对染料的磨擦牢度及匀染没有不良影响。

在染硫化染料时,更可防止起铜镜面的效果出现。

造纸工业:金属离子在纸浆漂白过程中引起的反应沉淀结垢,漂白剂无效分解,纸浆返黄等不良后果,纸浆漂白工艺中也需要使用螯合剂减少漂白的副作用,避免Fe3+离子与纸浆中的酚基团反应形成深颜色的复合物,保护纤维,提高纸浆白度,减少纸浆返黄。

循环水阻垢:在水处理中需要螯合剂用作循环冷却水和锅炉水的阻垢缓蚀剂,特别是针对含碳酸钡高的油田注水和冷却水、锅炉水的阻垢缓蚀剂。

清洗领域:无论是在工业清洗还是民用洗衣粉等日化产品,都需要螯合剂改善水质,提高净洗效果。

二,螯合剂的选用螯合剂种类繁多,如何选择适合的螯合剂则是我们最头疼和迷惑的地方,螯合力-稳定系数K是重要的参考指标,稳定系数K值越大,表明螯合剂对该离子的螯合能力越大。

下图为不同螯合剂对铁、钙、镁离子的螯合常数K值。

酸碱(pH值)对螯合剂螯合力影响在大多数使用螯合剂的工艺里面,工作液往往为酸性或碱性,因此pH值对螯合剂的影响对于螯合剂的选择与应用,尤为重要。

因此绘制出不同pH值条件下的螯合力曲线图,具有重要的实际意义,从而可以根据实际应用工艺条件,选择适合的螯合剂。

图表1铁离子螯合值(螯合值K)与pH曲线图表2钙离子螯合值(螯合值K)与pH曲线图表3镁离子螯合值(螯合值K)与pH曲线三,几种螯合剂的综合应用评价无机磷酸盐类:三聚磷酸钠以及焦磷酸钠是常用的螯合剂,自身带有弱碱性质,多用于洗衣粉添加剂。

螯合剂种类总结及其在不同pH下的对金属离子的螯合能力比较

螯合剂种类总结及其在不同pH下的对金属离子的螯合能力比较

螯合剂的种类及其在不同pH值条件下螯合剂的螯合常数一、螯合剂与螯合物具有可供配位孤电子对的分子、原子或离子的化合物能够与具有空轨道的金属离子形成配位键,该化合物称为络合物,如能与配位金属离子形成环状结构的化合物称为螯合剂,形成的络合物称为螯合物。

螯合剂中至少含有一对孤电子对,而金属离子必须有空的价电子轨道,孤电子对填充入金属离子空轨道,电子对属2个原子共享,形成配位键,中心金属离子空轨道杂化。

不同的提供孤电子对的配位体分别与不同金属离子形成正四面体、正六面体、正八面体的螯合物。

1.类型1.1无机类螯合剂聚磷酸盐螯合剂:主要是三聚磷酸钠(STPP)、六偏磷酸钠、焦磷酸钠为主,含磷酸基空间配位基团。

特点:高温下会发生水解而分解,使螯合能力减弱或丧失。

而且其螯合能力受pH值影响较大,一般只适合在碱性条件下作螯合剂。

1.2有机类螯合剂形态分析表明螯合剂提取的重金属主要来源于可交换态或酸溶态、还原态和氧化态。

1.21羧酸型(1)氨基羧酸类:含羧基和胺(氨基)配位基团,如乙二胺四乙酸(EDTA),氨基三乙酸(又称次氮基三乙酸NTA),二亚乙基三胺五乙酸(DTPA)及其盐等。

如:EDTA的4个酸和2个胺(—NRR′)的部分都可作为配体的齿,两个氮原子和四个氧原子可提供形成配位键的电子对。

特点:络合能力强,络合稳定常数大,耐碱性好,但分散力弱且不易被生物降解。

(2)羟基羧酸类含羟基、羧基配位基团这类羧酸主要是柠檬酸(CA)、酒石酸(TA)和葡萄糖酸(GA)。

特点:可生物降解,在酸性条件下羟基与羧基不会离解为氧负离子,因而络合能力很弱,不适宜在酸性介质中应用。

(3)羟氨基羧酸类这类酸用作螯合剂的典型代表是羟乙基乙二胺三乙酸(HEDTA)和二羟乙基甘氨酸(DEG)。

特点:大多易于生物降解,在pH=9的弱碱性条件下可螯合铁离子,但对其他离子螯合能力较差。

1.22有机多元膦酸羟基亚乙基-1,1-二膦酸(HEDP)、氨基三亚甲基膦酸(A TMP)、二乙烯三胺五亚甲基膦酸(HTPMP)、三乙烯四胺六亚甲(TETHMP)、双(1,6-亚己基)三胺五亚甲基膦酸(BNHMTPMP)、多氨基多醚基四亚甲基膦酸(PAPEMP)。

金属螯合剂

金属螯合剂

金属螯合剂金属螯合剂(metal chelating agent)可以通过螯合剂分子与金属离子的强结合作用,将金属离子包合到螯合剂内部,变成稳定的,分子量更大的化合物,从而阻止金属离子起作用,可以用于解毒,印染,阻垢等方面。

释义由一个简单正离子(称为中心离子)和几个中性分子或离子(称为配位体)结合而成的复杂离子叫配离子(又称络离子),含有配离子的化合物叫配位化合物。

在配合物中中心离子与配位体通过配位键结合。

配位键是一种特殊的共价键,通常的共价键是由两个成键·原子绷出一个电子形成共同电子对的,而在配位键中是由一个原子提供电子对,另一原手提供攀删道形成的。

为了区别把共价键用“一”表示,如H·+·H=H:H(H—H),配位键奶删“←”表示,箭头指向提供空轨道的原子,如Cu+NH3=CuNH3(Cu←NH3)。

如果配位体中只有一个配位原子,则中心离子与配位体之间只能形成一个配位键。

而有些配位体分瑚中含有两个以上的配位原子而且这两个原子间相隔着两至三个其他非配位原子时,:这个硼体就可以与中心离子(或原子)同时形成两个以上的配位键,并形成一个包括两个配位剿五元或六元环的特殊结构,把这种配合物称为螯合物。

螯合物比一般配合物更稳定。

编辑本段性质某些染料(如C. I. 分散红60,C. I. 分散蓝79等)在化学合成过程中带入铁、铜、镁、钙等离子,造成染料着色时色光发暗等不良影响,除在原染料中设法减少或避免这些离子侵入外,常采用金属螯合剂将这些离子螯合,使之不影响染料的印染效果。

所用的金属螯合剂有柠檬酸、乙二胺四乙酸(依地酸)等,用量通常为染料量的千分之几(如金属含量过高可适当多一些)。

除适用于上述几种分散染料品种外,也可用于对这些金属离子敏感的其他染料品种。

编辑本段类别一.、无机金属螯合剂聚磷酸盐螯合剂的缺点是它们在高温下会发生水解而分解,使螯合能力减弱或丧失。

而且其螯合能力受pH值影响较大,兰般只适合在碱性条件下作螯合剂。

金属螯合剂

金属螯合剂

金属螯合剂金属螯合剂是一种抑制金属的变换的金属络合物,它能够有效地与少量金属吸附形成稳定的络合物,抑制金属的变换,保护金属材料免受腐蚀,降低金属表面的含氧量,从而延缓金属材料的腐蚀。

金属螯合剂的研究与应用于金属材料的腐蚀抑制及其他领域有着重要的意义。

金属螯合剂是指以有机化合物为基体,具有螯合金属核苷酸的络合物。

由于它具有良好的抗腐蚀性,可以有效地防止金属表面的氧化损伤,因此可以用于金属和金属表面的抗腐蚀保护。

常见的金属螯合剂包括聚乙二醇醚-2-乙酰氨基苯甲酸酯(PEG-EA)、聚乙二醇氧乙酰-2-乙酰氨基苯甲酸酯(PEGE-EA)、薄荷醇-2-乙酰氨基苯甲酸酯(EUG)、氯乙烯醇-2-乙酰氨基苯甲酸酯(VEG-EA)、乙酸乙酯-2-乙酰氨基苯甲酸酯(EA)以及聚乙二醇氧乙酰(PEO)。

金属螯合剂的结构有三大类:直链结构、链状结构和光学活性结构。

每种结构有其独特的特征,如直链结构对金属的螯合作用最强,但螯合力受到限制;链状结构具有较强的扩展性,能够有效地抑制金属的作用;光学活性结构具有优异的螯合作用,可以有效地抑制金属的转化。

金属螯合剂的研究和应用已得到广泛重视。

在金属腐蚀抑制领域,金属螯合剂可以有效抑制金属的腐蚀,保护金属材料不受腐蚀影响。

此外,金属螯合剂还可以有效抑制金属的变换,减少金属表面含氧量,延缓金属材料的腐蚀。

另外,金属螯合剂还可以用于金属表面的改性,以提高金属表面的耐腐蚀性和附着力,用于金属表面的涂料、粉末涂层等。

此外,金属螯合剂在石油领域也有广泛应用,可以抑制金属腐蚀,保护油田仪器和橡胶管线设备免受腐蚀损坏。

在医药领域,金属螯合剂可以有效降低金属的毒性,有利于保护人体健康,用于安全非毒性的药物和生物制品的生产。

金属螯合剂可以有效抑制金属表面氧化,抑制金属腐蚀,减少金属表面含氧量,延缓金属材料的腐蚀。

金属螯合剂的研究和应用,可以有效改善金属材料的性能,可以保护金属材料免受腐蚀损伤,确保金属材料的安全性和可靠性,对金属表面的改性也有重要作用。

常用重金属络合剂

常用重金属络合剂

常用重金属络合剂一、铁络合剂铁络合剂是一类常用的重金属络合剂,它们能够与铁离子形成稳定的络合物。

常用的铁络合剂包括EDTA(乙二胺四乙酸)、DTPA(二乙三胺五乙酸)和NTA(乙二胺四乙酸)等。

这些络合剂具有很强的络合能力,能够有效地与铁离子结合,形成络合物,从而改变铁离子的性质和活性。

铁络合剂在工业和农业生产中广泛应用,可以用于水处理、肥料生产、金属腐蚀防护等领域。

二、铜络合剂铜络合剂是一类能够与铜离子形成络合物的化合物。

常见的铜络合剂有EDTA、DTPA和EGTA等。

这些络合剂通过与铜离子结合,形成稳定的络合物,可以改善铜离子的溶解性和稳定性,提高其在农业和工业生产中的应用效果。

铜络合剂广泛用于农药、养殖、水处理等领域,可以提高农作物的产量和质量,预防和治疗水生动物疾病,改善水质。

三、锌络合剂锌络合剂是一类与锌离子形成络合物的化合物。

常见的锌络合剂有EDTA、DTPA和NTA等。

这些络合剂能够与锌离子结合,形成稳定的络合物,提高锌离子的稳定性和活性,从而改善锌的生物利用率和吸收效果。

锌络合剂广泛应用于农业生产中,可以用作农药、肥料和饲料添加剂,提高农作物的产量和品质,促进动物的生长和免疫四、镉络合剂镉络合剂是一类能够与镉离子形成络合物的化合物。

常见的镉络合剂有EDTA、DTPA和NTA等。

这些络合剂能够与镉离子结合,形成稳定的络合物,提高镉离子的稳定性和生物利用率,减少对环境和生物体的毒害作用。

镉络合剂在环境保护和废水处理中有重要应用,可以用于去除废水中的镉离子,减少对环境的污染。

五、铅络合剂铅络合剂是一类能够与铅离子形成络合物的化合物。

常见的铅络合剂有EDTA、DTPA和NTA等。

这些络合剂能够与铅离子结合,形成稳定的络合物,减少铅离子的毒性和生物可利用性,降低对环境和人体的危害。

铅络合剂在环境治理和废水处理中起到重要作用,可以用于去除废水中的铅离子,减少对环境的污染。

六、汞络合剂汞络合剂是一类能够与汞离子形成络合物的化合物。

金属螯合剂

金属螯合剂

金属螯合剂金属螯合剂是一类化学物质,可以用来螯合金属离子,以及与溶液中的金属离子结合,形成化学键。

从技术上讲,它是一类特殊的螯合剂,也是精细化学中最重要的一类物质。

螯合剂的种类有很多,但是金属螯合剂的用途最广泛,最常见的是硼酸钙、硼酸钠、萘锶酸钾、硫酸钠、硼酸镁等等。

它们可以在其他反应物的作用下,迅速吸附溶液中的金属离子,从而融化金属离子,并分解一些混合溶液。

金属螯合剂也可以用于合成一些新的金属离子和化合物,使分析和合成精细化学产品变得更加容易。

金属螯合剂的主要用途是配制金属离子溶液和解决金属离子溶液中的盐析反应。

金属螯合剂的融合程序,可以将复杂的金属离子溶液分解成各种类型的离子,便于后续的分析和利用。

由于金属螯合剂的作用,可以融化金属离子,这使得在各种实验中更容易进行混合反应,以便得到有用的金属离子,并且还可以提高反应产物的纯度。

金属螯合剂还被广泛应用于实验室及工业生产中,如分析化学实验、纳米材料研究、以及电解技术、污染物处理等,可以达到更加精确的反应效果。

金属螯合剂在电解技术中发挥着重要作用,因为它可以将高电位的金属离子融化,使电解过程更高效,并且改变电解液中金属离子的电位,影响反应产物的类型。

金属螯合剂具有非常独特的性质,以及在各种反应中特殊的作用,它不仅可以用来融化金属离子,还可以用来配制各种金属离子溶液,从而分离金属离子,分离出各种有用的金属离子溶液,被广泛应用于精细化学领域,用于实验室和工业生产中。

另外,金属螯合剂也可以用作作为一种抗氧化剂,衰老抑制剂,去除水中的金属离子,以及其它各种医用和化妆品中的添加剂,以改善和保护产品的外观和功能。

总而言之,金属螯合剂无处不在,具有重要的作用,不仅可以用于实验室研究和工业生产,还可以用作作为抗氧化剂,衰老抑制剂,去除水中的金属离子,以及其它各种医用化妆品中的添加剂,为精细化学领域的发展贡献了重要的力量。

螯合剂EDTA简介

螯合剂EDTA简介

螯合剂EDTA简介螯合剂EDTA简介螯合剂是指能够与金属离子形成稳定的络合物的化合物。

它们在许多领域中起着重要作用,包括医学、环境保护和工业化学等。

其中,以螯合剂EDTA(乙二胺四乙酸)最为著名和广泛使用。

EDTA是一种多羧酸化合物,其化学结构如下:乙二胺四乙酸(EDTA)由乙二胺和乙醇(甲醇)以甲基化反应的方式生成。

它的结构中有四个羧酸基团,分别位于乙胺上的四个空间方向,这使得EDTA能够有效地与金属离子形成络合物。

EDTA具有许多优异的性质,使其成为广泛使用的螯合剂。

首先,EDTA具有良好的水溶性,因此可以在溶液中方便地使用。

其次,EDTA在溶液中能够稳定金属离子的存在,形成络合物,从而阻止金属离子与其他物质发生反应。

此外,EDTA还具有选择性,即它能够选择性地与某些金属离子形成络合物,而对其他金属离子不产生影响。

这种选择性使得EDTA在许多分析方法中得到了广泛应用。

EDTA的络合反应是以配位键形式进行的,其中羧酸基团中的氧原子与金属离子之间形成了共价键。

由于EDTA与金属离子的配位能力较强,形成的络合物具有较高的稳定性。

这种稳定性使得EDTA能够有效地去除水中的金属离子,从而在环境保护和水处理中具有重要的应用价值。

EDTA在医学领域中被广泛用作抗凝剂。

它能够与钙离子配位,阻止凝血过程的发生。

因此,EDTA被用于血液采集和某些外科手术中,以减少出血问题的发生。

此外,EDTA还被用作某些疾病的治疗药物,如重金属中毒和铅中毒的治疗等。

在工业化学中,EDTA被广泛应用于金属表面处理,如镀铝、镀锌和电镀等。

在这些过程中,金属离子在溶液中稳定存在,并与EDTA形成络合物,从而进行有序的金属离子沉积和形成均匀的金属涂层。

此外,EDTA还被用作某些化学反应的催化剂,从而提高反应的效率和选择性。

尽管EDTA在许多领域中有着广泛的应用,但也存在一些潜在的问题。

首先,EDTA是一种难降解的有机物,因此在环境中的寿命较长。

铅的络合剂

铅的络合剂

在许多行业中,铅是一种有害物质,必须进行控制和预防。

为了处理含铅废水,络合剂常被用于提高铅的去除效率。

目前已知的络合剂有很多种,以下是一些常见的铅络合剂:
1. 羧甲基纤维素钠:这是一种天然的高分子化合物,它具有多阴离子结构,能够与多种重金属离子发生络合反应,从而形成稳定的络合物。

通过加入这种络合剂,可以在废水中形成不易溶解的沉淀物,从而去除铅离子。

2. 腐植酸:这是一种天然的大分子有机物,具有多个活性基团,能够与重金属离子进行络合反应。

通过加入腐植酸,可以使铅离子形成稳定的络合物,从而达到去除铅离子的目的。

3. EDTA:这是一种常用的络合剂,能够与多种重金属离子发生强烈的络合反应,形成非常稳定的络合物。

通过加入EDTA,可以使铅离子形成不易溶解的络合物,从而在废水中去除铅离子。

4. DTPA:这也是一种常用的络合剂,可以与多种重金属离子发生强烈的络合反应。

它具有高溶解度、低成本、使用方便等特点。

通过加入DTPA,可以使铅离子形成不易溶解的络合物,从而在废水中去除铅离子。

需要注意的是,不同行业和不同水质条件下的铅去除方法可能会有所不同。

在实际应用中,需要根据具体情况选择合适的络合剂和处理方法,以达到最佳的铅去除效果。

  1. 1、下载文档前请自行甄别文档内容的完整性,平台不提供额外的编辑、内容补充、找答案等附加服务。
  2. 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
  3. 3、如文档侵犯您的权益,请联系客服反馈,我们会尽快为您处理(人工客服工作时间:9:00-18:30)。

Angioprim is a proprietary liquid blend of amino acids which is effective in the removal of plaque and calcium deposit from the body. To be most effective, this dietary supplement must be taken on an empty stomach. For optimal results, drink the Angioprim-juice mixture, described below, first thing in the morning and wait twenty minutes after your last sip of Angioprim before having your breakfast or other liquids. Mixing - Angioprim can be mixed with juice or distilled water: The optimal juices for Angioprim are apple juice, orange juice, pineapple juice, and tomato juice. Be sure to choose ones that say no calcium on the ingredients label, the lower the mineral content the more effective the Angioprim will be. Add one bottle of Angioprim to 24 Oz (750ml) of juice, distilled water, or any combination of the two in a glass container. This is a two day supply. You will use one half of the mixture each day. Be sure to shake before use on the second day. Refrigerate the second half if mixed with a liquid that needs to be refrigerated.Avoid using metal or plastic containers as they can reduce the effectiveness of the product. The bottle that Angioprim is shipped in is non toxic plastic and will cause no harm. We do not know what type of plastic you have in your home, so to be safe use glass containers. Do not mix Angioprim with V-8, Cranberry juice, Colas, or sports drinks like Gatorade, Noni, or Pomegranate as they have high levels of metals and will prevent cleaning. Don’t mix with tea and coffee because the taste will disappoint you. You can drink tea, coffee, or colas after you have taken the Angioprim in the morning. Frozen concentrates and Kool-Aid’s are acceptable, the ingredien ts may show it has some metals like calcium and magnesium, but unless it says calcium added don’t worry it’s OK. Mix Kool-Aid and concentrates with distilled or RO water.Mixing alternative... If you cannot drink juices or the Kool Aid, boil twenty-four ounces (750ml) of filtered water, turn off the heat, add a few of slices of fresh ginger, stir and let this flavor from the ginger oils blend into the water, add a tablespoon of honey (optional), and the juice from one lemon. When the mixture is cooled, remove the ginger and pour the liquid into a glass bottle along with one full bottle of Angioprim. Do not add Angioprim to the mixture when it is in the saucepan as we do not want our product to come into contact with metals. Sip half of this mixture over two hours each morning on an empty stomach.Dairy products are prohibited on the days you are cleaning with Angioprim; Yogurt, milk, cheese, and ice cream are 40% Calcium and will decrease the effectiveness of Angioprim. Read the ingredients on packaged foods; avoid added calcium. Best practice is that if it says not a significant source of Calcium it is fine.Angioprim Cleaning Regimen. Each bottle of Angioprim as mixed by the above instructions is a two day supply. After mixing, pour one-half of this mixture into a separate glass container from which you can drink. You can start sipping immediately upon getting out of bed in the morning. It is required that you ingest the contents of this bottle over one and a half hours to two hours, which will assure the ultimate amount of absorption of the product. Twenty minutes after the last sip of Angioprim you may have your breakfast, coffee, etc.During the days you are Cleaning take two 400 IU tabs of vitamin E and two 500 Mg tabs of vitamin C with your breakfast, take one vitamin E and one 500 to 1000 IU vitamin D3 with your lunch every day, and take two 400 IU vitamin E and two 500 Mg vitamin C with your supper on the days that you use Angioprim. Use natural vitamin E. Use plain vitamin C and not ester-C or vitamin C with additives. The vitamin regimen is an integral part of the Cleaning and should not be skipped. If you have been supplied with Cherry Boost or Salvestrin one tablet should be taken with breakfast and one with the evening meal.Angioprim Cleaning LevelsPRIMARY CLEANING (preventative): For those with semi- serious concerns, a good indication is resting Blood Pressure over 130 on the high end, or a history of heart or cardiovascular problems in the family. Use 12 bottles of Angioprim in 24 days for this preventative Cleaning.MAJOR CLEANING: For serious blockages of 30 to 60% with symptoms like pain in the chest, legs, arms, back or face. A 40 day program (20 bottles) with 4 bottles left for 8 months of maintenance. This regimen can be broken into two 20 day regimens. You may use all of the bottles if you feel that you do not desire to do maintenance. Cherry boost or Salvestrin is available for the Major and Ultimate cleaning to help clean those difficult arteries. If leg pain persists call us.ULTIMATE CLEANING: For severe blockage of 60 to 100%. Those experiencing severe Angina pain in the chest or arm with exertion would do best on this level of Cleaning. Expect to use 30 or more bottles for Carotid Artery blockage. Even when you are on the verge of surgery, Angioprim can still restore your health. Exercise, especially cardio exercise that increases the heart rate, is not recommended for those taking the Ultimate Cleaning. Lots of rest with minimal activity is needed; don’t strain or stress yourself.Variable one… You can increase the amount of Angioprim to a full bottle daily if you want faster results. This should be done with the full understanding that you may experience some upset stomach or loose bowel during this accelerated protocol. This will require the full 24 ounces (750 ml) of mixture to be slowly sipped over three to four hours, again on an empty stomach and starting as soon as you awaken. It is not necessary to increase the amount of vitamins with this change.Variable two… In a very small number of cases nausea or loose bowel may occur. If this infringes on your schedule you can reduce the daily amount of Angioprim mixture to eight ounces (250 ml) sipped over one to one and a half hours. This slower usage of Angioprim is also appropriate if you find increasing blood pressure to be a concern. Each mixed bottle will then become a three day supply. If you select this option, please reduce the daily amount of vitamins C and E to one of each with your breakfast and supper meals and one vitamin E and one vitamin D with your lunch.Cleaning Notes: If you require two or more of the 12 bottle regimens, you may take a few days break after completing each 12 bottle cleanse and return all the foods on the diet restrictions list to your menu. During this break, reduce the vitamins C and E to one of each per day. Each 12 bottle regimen is to be mixed and used as shown in these instructions.As Angioprim dissolves calcium it could cause a slight rise in Blood pressure, if so, it’s OK. If Blood Pressure rises to over 160 stop taking Angioprim until it goes down, drink fluids, and skip taking Angioprim for a day or two. Angioprim will not conflict with most prescribed medications. Do not eat more than half a banana once or twice a week (high Potassium). If muscle cramps occur take magnesium tablets or milk of magnesia in the evening. If you use potassium or magnesium daily it should be taken in late afternoon and you may need to take more Angioprim for a longer number of days.You may experience slightly increased blood pressure during the early stages of the Cleaning regimen as the components of plaque, being in the arteries, are transported by blood circulation to exit the body through the kidneys and urine. This is a temporary condition and you may reduce your Angioprim dosage to one bottle over three days to help alleviate this symptom. Please refer to “Variable two” above for advice on vitamin amounts during this regimen.If you are on any prescription medication, please take these medications during or after your meals so they do not conflict with the Angioprim Cleaning. Angioprim has no contraindications to prescribed medications. If any of you medications are anti-coagulants it is prudent that you use them around your supper time as Angioprim does have some anti-coagulant properties and we do not want you to have too much of this at any one time of the day.Diet… During your Cleaning avoid oatmeal, sports drinks, fortified cereals, food supplements, non-prescribed drugs, protein drinks, dairy products, and soy products. If you choose to eat packaged foods, check the labels to be sure you avoid the ones with mineral additives most specifically Calcium. Also avoid all dietary supplements such as fish oils and flax seed oils during the regimen. Some supplements may be detrimental to our product. Do not use calcium, B vitamins, or multi-mineral supplements on those days when you take Angioprim. If you are accustomed to using CoQ10 or omega-3, you may continue this during the regimen by taking it later in the day around your supper time.It is advisable during the Angioprim cleanse for you to enjoy a varied diet of fresh foods to help supply a wide range of nutrients and minerals in the bio-available form. It is impossible to avoid minerals in one’s diet and we understand this. We only ask that you avoid the ones that are listed above since the high mineral content of these foods will decrease the benefits of Angioprim. All the foods you eat should be used in moderation and it is good to have fresh fruits and vegetables when available. Other acceptable consumables include beef, poultry, fish, eggs, vegetables, and filtered water. Maintenance Program: After the cleaning we recommend one bottle for maintenance every other month (those with more serious problems or with stents can take one bottle per month), this keeps you healthy and will help you avoid needing another Cleaning for a while. Mix one bottle of Angioprim in 24 oz.. of liquid, take one half of the mixture each day. When taking the maintenance follow the same rules that you followed during your original cleaning program.Angioprim is a time exposure product that removes the minerals it can access in your plaque. During the remainder of the day Vitamins C, E, and D3 along with the residual of the Angioprim helps to dilute the cholesterol portion on the surface of the plaque, allowing it to exit the body at the molecular level, thereby exposing more metals (calcium) for the next day’s Angioprim. Vitamin C, besides being benefi cial for cardiovascular health, will also help in the healing of any lesions (damaged blood vessel walls) that may have caused the plaque to start accumulating.Technical Questions call 702-412- 7762 9 till 6 Pacific。

相关文档
最新文档