论文外文文献翻译及原文
毕业论文(设计)外文文献翻译及原文
金融体制、融资约束与投资——来自OECD的实证分析R．SemenovDepartment of Economics，University of Nijmegen，Nijmegen（荷兰内梅亨大学，经济学院）这篇论文考查了OECD的11个国家中现金流量对企业投资的影响.我们发现不同国家之间投资对企业内部可获取资金的敏感性具有显著差异,并且银企之间具有明显的紧密关系的国家的敏感性比银企之间具有公平关系的国家的低.同时，我们发现融资约束与整体金融发展指标不存在关系.我们的结论与资本市场信息和激励问题对企业投资具有重要作用这种观点一致，并且紧密的银企关系会减少这些问题从而增加企业获取外部融资的渠道。
一、引言各个国家的企业在显著不同的金融体制下运行。
金融发展水平的差别(例如，相对GDP的信用额度和相对GDP的相应股票市场的资本化程度），在所有者和管理者关系、企业和债权人的模式中，企业控制的市场活动水平可以很好地被记录.在完美资本市场,对于具有正的净现值投资机会的企业将一直获得资金。
然而，经济理论表明市场摩擦，诸如信息不对称和激励问题会使获得外部资本更加昂贵，并且具有盈利投资机会的企业不一定能够获取所需资本.这表明融资要素，例如内部产生资金数量、新债务和权益的可得性，共同决定了企业的投资决策.现今已经有大量考查外部资金可得性对投资决策的影响的实证资料（可参考，例如Fazzari（1998）、 Hoshi(1991)、 Chapman（1996）、Samuel(1998））.大多数研究结果表明金融变量例如现金流量有助于解释企业的投资水平。
这项研究结果解释表明企业投资受限于外部资金的可得性。
很多模型强调运行正常的金融中介和金融市场有助于改善信息不对称和交易成本，减缓不对称问题,从而促使储蓄资金投着长期和高回报的项目,并且提高资源的有效配置（参看Levine（1997)的评论文章）。
因而我们预期用于更加发达的金融体制的国家的企业将更容易获得外部融资.几位学者已经指出建立企业和金融中介机构可进一步缓解金融市场摩擦。
浙江大学本科毕业论文外文文献翻译
核准通过，归档资料。
未经允许，请勿外传!浙江大学本科毕业论文外文文献翻译The influence of political connections on the firm value of small and medium-sized enterprises in China政治关联在中国对中小型企业价值的影响1摘要中小型企业的价值受很多因素的影响,比如股东、现金流以及政治关联等.这篇文章调查的正是在中国政治关联对中小型企业价值的影响。
通过实验数据来分析政治关联对企业价值效益的影响.结果表明政府关联是关键的因素并且在中国对中小型企业的价值具有负面影响。
2重要内容翻译2。
1引言在商业界,有越来越多关于政治关联的影响的经济研究。
它们发现政治关联能够帮助企业确保有利的规章条件以及成功获得资源，比如能够最终提高企业价值或是提升绩效的银行贷款，这种政治关联的影响在不同的经济条件下呈现不同的效果。
在高腐败和法律制度薄弱的国家，政治关联对企业价值具有决定性因素1的作用.中国由高度集权的计划经济向市场经济转变，政府对市场具有较强的控制作用，而且有大量的上市企业具有政治关联。
中小型企业发展的很迅速，他们已经在全球经济环境中变得越来越重要。
从90年代起, 政治因素对中国的任何规模的企业来说都变得越来越重要,尤其是中小型企业的价值。
和其他的部门相比较，中小型企业只有较小的现金流，不稳定的现金流且高负债率.一方面，中小型企业改变更加灵活；另一方面,中小型企业在由于企业规模以及对银行来说没有可以抵押的资产，在筹资方面较为困难。
企业如何应对微观经济环境和政策去保证正常的企业活动，并且政治关联如何影响企业价值？这篇论文调查政治关联和企业价值之间的联系,并且试图去研究企业是否可以从政治关联中获利提升企业价值。
2.2定义这些中小型企业之所以叫中小型企业，是和管理规模有关。
对这些小企业来说，雇员很少，营业额较低,资金一般由较少的人提供,因此，通常由这些业主直接管理企业。
外文文献翻译译稿和原文
外文文献翻译译稿1卡尔曼滤波的一个典型实例是从一组有限的，包含噪声的，通过对物体位置的观察序列（可能有偏差）预测出物体的位置的坐标及速度。
在很多工程应用（如雷达、计算机视觉）中都可以找到它的身影。
同时，卡尔曼滤波也是控制理论以及控制系统工程中的一个重要课题。
例如，对于雷达来说，人们感兴趣的是其能够跟踪目标。
但目标的位置、速度、加速度的测量值往往在任何时候都有噪声。
卡尔曼滤波利用目标的动态信息，设法去掉噪声的影响，得到一个关于目标位置的好的估计。
这个估计可以是对当前目标位置的估计（滤波），也可以是对于将来位置的估计（预测），也可以是对过去位置的估计（插值或平滑）。
命名[编辑]这种滤波方法以它的发明者鲁道夫.E.卡尔曼（Rudolph E. Kalman）命名，但是根据文献可知实际上Peter Swerling在更早之前就提出了一种类似的算法。
斯坦利。
施密特（Stanley Schmidt）首次实现了卡尔曼滤波器。
卡尔曼在NASA埃姆斯研究中心访问时，发现他的方法对于解决阿波罗计划的轨道预测很有用，后来阿波罗飞船的导航电脑便使用了这种滤波器。
关于这种滤波器的论文由Swerling（1958）、Kalman (1960)与Kalman and Bucy（1961）发表。
目前，卡尔曼滤波已经有很多不同的实现。
卡尔曼最初提出的形式现在一般称为简单卡尔曼滤波器。
除此以外，还有施密特扩展滤波器、信息滤波器以及很多Bierman, Thornton开发的平方根滤波器的变种。
也许最常见的卡尔曼滤波器是锁相环，它在收音机、计算机和几乎任何视频或通讯设备中广泛存在。
以下的讨论需要线性代数以及概率论的一般知识。
卡尔曼滤波建立在线性代数和隐马尔可夫模型（hidden Markov model）上。
其基本动态系统可以用一个马尔可夫链表示，该马尔可夫链建立在一个被高斯噪声（即正态分布的噪声）干扰的线性算子上的。
系统的状态可以用一个元素为实数的向量表示。
企业可持续发展战略研究论文中英文外文翻译文献
企业可持续发展战略研究论文中英文外文翻译文献文献1：Sustainable Development Strategies for Businesses该研究论文介绍了企业可持续发展战略的重要性以及相关的实施策略。
可持续发展不仅关注经济利益，还需兼顾社会和环境的利益。
本文提出了几种实施可持续发展战略的方法，包括资源管理、供应链管理和利益相关者合作。
企业应该采取综合性的战略，以确保其经营活动对社会和环境带来积极影响。
文献2：The Role of Corporate Governance in Sustainable Development该文献探讨了公司治理在可持续发展中的作用。
有效的公司治理可以确保企业在经济、社会和环境层面上实现可持续发展目标。
文章讨论了几个与公司治理相关的因素，包括股东权益保护、透明度和问责制。
作者强调了公司治理在促进可持续发展中的重要性，并提出了一些改善公司治理的建议。
文献3：Innovation Strategies for Sustainable Development该研究论文研究了创新战略在可持续发展中的作用。
创新可以推动经济发展，并帮助解决环境和社会问题。
本文提出了几种创新策略，包括技术创新、商业模式创新和社会创新。
作者认为，企业应该将创新作为实现可持续发展的关键策略，并呼吁政府和社会各界提供支持。
文献4：The Importance of Stakeholder Engagement in Sustainable Development该文献强调了利益相关者参与在可持续发展中的重要性。
利益相关者包括员工、股东、政府、社区和其他利益相关的组织。
作者认为，企业应该积极参与利益相关者，并尊重他们的权益和意见。
文章提出了一些有效的利益相关者参与策略，包括沟通、合作和共同决策。
该文献强调了利益相关者参与对企业可持续发展的重要性。
文献5：Measuring and Reporting Sustainability Performance of Businesses该研究论文研究了测量和报告企业可持续发展绩效的方法和指标。
毕业设计论文外文文献翻译
毕业设计(论文）外文文献翻译院系：财务与会计学院年级专业：201＊级财务管理姓名:学号：132148*＊*附件: 财务风险管理【Abstract】Although financial risk has increased significantly in recent years risk and risk management are not contemporary issues。
The result of increasingly global markets is that risk may originate with events thousands of miles away that have nothing to do with the domestic market。
Information is available instantaneously which means that change and subsequent market reactions occur very quickly。
The economic climate and markets can be affected very quickly by changes in exchange rates interest rates and commodity prices。
Counterparties can rapidly become problematic。
As a result it is important to ensure financial risks are identified and managed appropriately. Preparation is a key component of risk management。
【Key Words】Financial risk，Risk management，YieldsI. Financial risks arising1.1What Is Risk1.1.1The concept of riskRisk provides the basis for opportunity. The terms risk and exposure have subtle differences in their meaning. Risk refers to the probability of loss while exposure is the possibility of loss although they are often used interchangeably。
建筑学Modern-Architecture现代建筑大学毕业论文外文文献翻译及原文
建筑学Modern-Architecture现代建筑⼤学毕业论⽂外⽂⽂献翻译及原⽂毕业设计（论⽂）外⽂⽂献翻译⽂献、资料中⽂题⽬：现代建筑⽂献、资料英⽂题⽬：Modern Architecture⽂献、资料来源：⽂献、资料发表（出版）⽇期：院（部）：专业：班级：姓名：学号：指导教师：翻译⽇期： 2017.02.14建筑学毕业设计的外⽂⽂献及译⽂⽂献、资料题⽬：《Advanced Encryption Standard》⽂献、资料发表（出版）⽇期：2004.10.25外⽂⽂献：Modern ArchitectureModern architecture, not to be confused with 'contemporary architecture', is a term given to a number of building styles with similar characteristics, primarily the simplification of form and the elimination of ornament. While the style was conceived early in the 20th century and heavily promoted by a few architects, architectural educators and exhibits, very few Modern buildings were built in the first half of the century. For three decades after the Second World War, however, it became the dominant architectural style for institutional and corporate building.1. OriginsSome historians see the evolution of Modern architecture as a social matter, closely tied to the project of Modernity and hence to the Enlightenment, a result of social and political revolutions.Others see Modern architecture as primarily driven by technological and engineering developments, and it is true that the availability of new building materials such as iron, steel, concrete and glass drove the invention of new building techniques as part of the Industrial Revolution. In 1796, Shrewsbury mill owner Charles Bage first used his ‘fireproof’ design, which relied on cast iron and brick with flag stone floors. Such construction greatly strengthened the structure of mills, which enabled them to accommodate much bigger machines. Due to poor knowledge of iron's properties as a construction material, a number of early mills collapsed. It was not until the early 1830s that Eaton Hodgkinson introduced the section beam, leading to widespread use of iron construction, this kind of austere industrial architecture utterly transformed the landscape of northern Britain, leading to the description, "Dark satanic mills" of places like Manchester and parts of West Yorkshire. The Crystal Palace by Joseph Paxton at the Great Exhibition of 1851 was an early example of iron and glass construction; possibly the best example is the development of the tall steel skyscraper in Chicago around 1890 by William Le Baron Jenney and Louis Sullivan. Early structures to employ concrete as the chief means of architectural expression (rather than for purely utilitarian structure) include Frank Lloyd Wright's Unity Temple, built in 1906 near Chicago, and Rudolf Steiner's Second Goetheanum, built from1926 near Basel, Switzerland.Other historians regard Modernism as a matter of taste, a reaction against eclecticism and the lavish stylistic excesses of Victorian Era and Edwardian Art Nouveau.Whatever the cause, around 1900 a number of architects around the world began developing new architectural solutions to integrate traditional precedents (Gothic, for instance) with new technological possibilities. The work of Louis Sullivan and Frank Lloyd Wright in Chicago, Victor Horta in Brussels, Antoni Gaudi in Barcelona, Otto Wagner in Vienna and Charles Rennie Mackintosh in Glasgow, among many others, can be seen as a common struggle between old and new.2. Modernism as Dominant StyleBy the 1920s the most important figures in Modern architecture had established their reputations. The big three are commonly recognized as Le Corbusier in France, and Ludwig Mies van der Rohe and Walter Gropius in Germany. Mies van der Rohe and Gropius were both directors of the Bauhaus, one of a number of European schools and associations concerned with reconciling craft tradition and industrial technology.Frank Lloyd Wright's career parallels and influences the work of the European modernists, particularly via the Wasmuth Portfolio, but he refused to be categorized with them. Wright was a major influence on both Gropius and van der Rohe, however, as well as on the whole of organic architecture.In 1932 came the important MOMA exhibition, the International Exhibition of Modern Architecture, curated by Philip Johnson. Johnson and collaborator Henry-Russell Hitchcock drew together many distinct threads and trends, identified them as stylistically similar and having a common purpose, and consolidated them into the International Style.This was an important turning point. With World War II the important figures of the Bauhaus fled to the United States, to Chicago, to the Harvard Graduate School of Design, and to Black Mountain College. While Modern architectural design never became a dominant style in single-dwelling residential buildings, in institutional and commercial architecture Modernism became the pre-eminent, and in the schools (for leaders of the profession) the only acceptable, design solution from about 1932 to about 1984.Architects who worked in the international style wanted to break with architectural tradition and design simple, unornamented buildings. The most commonly used materials are glass for the facade, steel for exterior support, and concrete for the floors and interior supports; floor plans were functional and logical. The style became most evident in the design of skyscrapers. Perhaps its most famous manifestations include the United Nations headquarters (Le Corbusier, Oscar Niemeyer, Sir Howard Robertson), the Seagram Building (Ludwig Mies van der Rohe), and Lever House (Skidmore, Owings, and Merrill), all in New York. A prominent residential example is the Lovell House (Richard Neutra) in Los Angeles.Detractors of the international style claim that its stark, uncompromisingly rectangular geometry is dehumanising. Le Corbusier once described buildings as "machines for living", but people are not machines and it was suggested that they do not want to live in machines. Even Philip Johnson admitted he was "bored with the box." Since the early 1980s many architects have deliberately sought to move away from rectilinear designs, towards more eclectic styles. During the middle of the century, some architects began experimenting in organic forms that they felt were more human and accessible. Mid-century modernism, or organic modernism, was very popular, due to its democratic and playful nature. Alvar Aalto and Eero Saarinen were two of the most prolific architects and designers in this movement, which has influenced contemporary modernism.Although there is debate as to when and why the decline of the modern movement occurred, criticism of Modern architecture began in the 1960s on the grounds that it was universal, sterile, elitist and lacked meaning. Its approach had become ossified in a "style" that threatened to degenerate into a set of mannerisms. Siegfried Giedion in the 1961 introduction to his evolving text, Space, Time and Architecture (first written in 1941), could begin "At the moment a certain confusion exists in contemporary architecture, as in painting; a kind of pause, even a kind of exhaustion." At the Metropolitan Museum of Art, a 1961 symposium discussed the question "Modern Architecture: Death or Metamorphosis?" In New York, the coup d'état appeared to materialize in controversy around the Pan Am Building that loomed over Grand Central Station, taking advantage of the modernist real estate concept of "air rights",[1] In criticism by Ada Louise Huxtable and Douglas Haskell it was seen to "sever" the Park Avenue streetscape and "tarnish" the reputations of its consortium of architects: Walter Gropius, Pietro Belluschi and thebuilders Emery Roth & Sons. The rise of postmodernism was attributed to disenchantment with Modern architecture. By the 1980s, postmodern architecture appeared triumphant over modernism, including the temple of the Light of the World, a futuristic design for its time Guadalajara Jalisco La Luz del Mundo Sede International; however, postmodern aesthetics lacked traction and by the mid-1990s, a neo-modern (or hypermodern) architecture had once again established international pre-eminence. As part of this revival, much of the criticism of the modernists has been revisited, refuted, and re-evaluated; and a modernistic idiom once again dominates in institutional and commercial contemporary practice, but must now compete with the revival of traditional architectural design in commercial and institutional architecture; residential design continues to be dominated by a traditional aesthetic.中⽂译⽂：现代建筑现代建筑,不被混淆与'当代建筑' , 是⼀个词给了⼀些建筑风格有类似的特点, 主要的简化形式,消除装饰等. 虽然风格的设想早在20世纪,并⼤量造就了⼀些建筑师、建筑教育家和展品,很少有现代的建筑物,建于20世纪上半叶. 第⼆次⼤战后的三⼗年, 但最终却成为主导建筑风格的机构和公司建设.1起源⼀些历史学家认为进化的现代建筑作为⼀个社会问题, 息息相关的⼯程中的现代性,从⽽影响了启蒙运动,导致社会和政治⾰命.另⼀些⼈认为现代建筑主要是靠技术和⼯程学的发展, 那就是获得新的建筑材料,如钢铁, 混凝⼟和玻璃驱车发明新的建筑技术,它作为⼯业⾰命的⼀部分. 1796年, shrewsbury查尔斯bage⾸先⽤他的'⽕'的设计, 后者则依靠铸铁及砖与⽯材地板. 这些建设⼤⼤加强了结构,使它们能够容纳更⼤的机器. 由于作为建筑材料特性知识缺乏,⼀些早期建筑失败. 直到1830年初,伊顿Hodgkinson预计推出了型钢梁, 导致⼴泛使⽤钢架建设，⼯业结构完全改变了这种窘迫的⾯貌,英国北部领导的描述, "⿊暗魔⿁作坊"的地⽅如曼彻斯特和西约克郡. ⽔晶宫由约瑟夫paxton的重⼤展览, 1851年,是⼀个早期的例⼦,钢铁及玻璃施⼯; 可能是⼀个最好的例⼦,就是1890年由William乐男爵延长和路易沙利⽂在芝加哥附近发展的⾼层钢结构摩天楼. 早期结构采⽤混凝⼟作为⾏政⼿段的建筑表达(⽽⾮纯粹功利结构) ,包括建于1906年在芝加哥附近,劳埃德赖特的统⼀宫, 建于1926年瑞⼠巴塞尔附近的鲁道夫斯坦纳的第⼆哥特堂,.但⽆论原因为何, 约有1900多位建筑师,在世界各地开始制定新的建筑⽅法,将传统的先例(⽐如哥特式)与新的技术相结合的可能性.路易沙利⽂和赖特在芝加哥⼯作,维克多奥尔塔在布鲁塞尔,安东尼⾼迪在巴塞罗那, 奥托⽡格纳和查尔斯景mackintosh格拉斯哥在维也纳,其中之⼀可以看作是⼀个新与旧的共同⽃争.2现代主义风格由1920年代的最重要⼈物,在现代建筑⾥确⽴了⾃⼰的名声. 三个是公认的柯布西耶在法国, 密斯范德尔德罗和⽡尔特格罗⽪乌斯在德国. 密斯范德尔德罗和格罗⽪乌斯为董事的包豪斯, 其中欧洲有不少学校和有关团体学习调和⼯艺和传统⼯业技术.赖特的建筑⽣涯中,也影响了欧洲建筑的现代艺术,特别是通过⽡斯穆特组合但他拒绝被归类与他们. 赖特与格罗⽪乌斯和Van der德罗对整个有机体系有重⼤的影响.在1932年来到的重要moma展览,是现代建筑艺术的国际展览,艺术家菲利普约翰逊. 约翰逊和合作者亨利-罗素阁纠集许多鲜明的线索和趋势, 内容相似,有⼀个共同的⽬的,巩固了他们融⼊国际化风格这是⼀个重要的转折点. 在⼆战的时间包豪斯的代表⼈物逃到美国,芝加哥，到哈佛⼤学设计⿊⼭书院. 当现代建筑设计从未成为主导风格单⼀的住宅楼，在成为现代卓越的体制和商业建筑, 是学校(专业领导)的唯⼀可接受的, 设计解决⽅案,从约1932年⾄约1984年.那些从事国际风格的建筑师想要打破传统建筑和简单的没有装饰的建筑物。
建筑环境与设备工程毕业论文中英文资料外文翻译文献
建筑环境与设备工程毕业论文中英文资料外文翻译文献篇一：建筑环境与设备工程中英文对照外文翻译文献中英文对照外文翻译文献(文档含英文原文和中文翻译)原文：Ground Source Heat PumpAt present,energy is the most important element for the development of states’economy.Because of the good energy-saving effect,using regenerate resource of energy,and no pollution,the GROUND SOURCE HEAT PUMP AIR-CONDITION is used more and more popular now.In the system of the GROUND SOURCE HEAT PUMP AIR-CONDITION,the terminal devices what include the fan,the deep well pump,the circulate pump are the biggest energy-consumed part except the inner device as well as the compressor motor, etc.So it is very important and significant to make the terminal devices running in the mostenergy-saving condition.In this paper,the author founded on the GROUND SOURCE HEAT PUMP AIR-CONDITION in Guangxi University,based on the actual project condition, made the redesign through the way of frequency conversiontechnology for the old system of GROUND SOURCE HEAT PUMP AIR-CONDITION.At first, the equipments’ running control system were improved following the energy-saving principle of fan and pump,choused Mitsubishi FR series frequency transducer with vector-controlfunction,Mitsubishi FX2N series PLC and other auxiliary parts to make up of the auto-control system for the GROUND SOURCE HEAT PUMP AIR-CONDITION,and then did the emulating analysis for the vector-control mode in the frequency conversion process.In the next based the auto-control system,made the PLC control system designing.This system monitor the temperature and flux in accurate and real time,then input feedback to the plc,finally the terminal device running status will correspond to the customer’s demanded-load,it can wellmeet the goal for saving energy and prolong the life of the motor and other device.At the same time,designed the PLC control process,according to this transformation of the specific programme,programmed for the PLC by using the FX-GP/WIN-C programme software.Researched and analyses the PIDalgorithm and its improved algorithm for the PID Operational module in the PLC.At last,through detailed analysis and accounted for energy-saving effect and the cost of thesystem-reforming,validated the profitability of this redesigned-project,and showed its feasibility and worthBe using renewable geothermal energy in shallow ground layer, a ground source heat pump (GSHP) technology is known as one of air conditioning techniques which have the greatest developmental. The GSHP has great potentials in energy reduction and in reducing CO2emissions to conventional HVAC systems. In China, energy shortage and environmental issues pose a seriouschallenge accompanied by rapid economic growth. GSHP has been spotlighted as both energy efficiency and environmental benefits. Generally, the initial investment for a GCHP system is higher than that of a conventional system. GCHP energy savings will offset the higher installing cost in future. However, there are many aspects affecting the actual amount of energy saved, such as climate, building load, ground heat exchanger, heat pump, control, etc. Recently, a lot of research on the energy performance of GCHP has been carried out. However, most of these previous research projects evaluated the performance of GCHP system based on a laboratory scale or a small capacity system. There is little data documenting the long-term performance of a large-sized GCHP. Evalution and research on real world installed GCHP will provide a more accurate understanding of the current technology’s performance.The paper presented that the energy performance evaluation of two types of GSHPs based on actual operational data. The two types of GSHPs were ground-coupled heat pump system (GCHPs) and groundwater heat pump system (GWHPs) which were,respectively, installed in two apartment buildings of Wuhan, China. In one year, we monitored various operating parameters, including the outdoor temperature, the flow rate, electrical consumption, and the water temperature. The coefficient of performance (COP) values of system and chiller were determined based on a series of measurements. During residential GCHP system operation, the heat injection rate into soil is larger than the heatextraction rate out of soil. The COP of chillers of the GCHPs decreased significantly during the heating season due to the lowering of ground soil temperature. The system power consumption exhibited a strong linear relationship with outdoor temperature in both seasons and this suggests that normalizing power consumption against degree-days is a highly practical index in energy analysis in resident buildings, especially in winter.Some research topics were studied on the two actual cases. An exergy analysis of a ground water heat pump system on the actual operation was conduced. The energy efficiency and exergy loss and efficiency in each of the components of the system are detemined forthe average measured parameters obtained from the monitored results of the hottest month and the coldest month. Inefficient facts are found out and increased energy efficiencies of two proposed improvement measures were estimated. Lower approachtemperature is effective energy saving. In addition to the energy analysis, a full exergy analysis helps to identify the components where inefficiencies occur. An economic analysis model forGWHP was established to calculate energy consumption and operating cost based on a baseline condition. Plate heat exchanger flow rate and groundwater flow rate were optimization parameters according to different water price of the groundwater:GWHP survey data shows the impact of water price on groundwater flow rate in design. The long-term energy performances of theGWHPs and the GCHPs were investigated and compared with conventional HVAC systems and other GSHPs on literature data. A performances model was established base on the two cases to constrast the predictedperformance with the actual performance.Based on superposition theorem of geothermal heat exchangers (GHE), a inverse model for GHE, G-functions interpolationapproach was proposed. Linear interpolation method was adopted to fit G-functions. The method presented here uses the Nelder and Mead simplex algorithm as part of a parameter estimation algorithm to estimate G-function. For verification of G-functions interpolation approach, anumerical experimentation had been conducted where synthetic load on GHE was established. The simulation results with error and no error, were inversely modeled by G-functions interpolation approach and DST calibrated approach. The actual dataset of a small sized and a large sized GSHPs were also used in inverse modeling to verify the results from the G-functions interpolation approach. The small sized GSHPs was from literature. The large sized vertical GSHPs was the monitored case in the paper. A detailed DST model of a GHE has been calibrated to monitored data. The secondyear predicted temperatures calculated by the two models were compared with the measured. The results show the two approaches are reliable and have good performance of error tolerance. The error of GHE water temperature calculated by G-functions interpolation approach was less than DST calibrated approaches. The data error inversely modeled was mainly from recorded day data. As a extension study of the G-functions interpolation model, degree-day G-functions approach was proposed. The model was based on degree-day prediction load and can be applied on the residential buildings. The standard deviation of GHE water temperature by degree-day G-functions approach was larger than DST calibrated approaches. The result shows the appropriateness of degree-day G-functions interpolation approach for the quantitative modeling of GHE.This paper shows that the research on actual performance according measured data and presents two inverse models:G-functions interpolation model, degree-day G-functions model approach, which provides new methods for GHE inverse modelingWith the sustainable development theory being put forward in recent years, people pay more and more attention to energy efficiency and environmental protection. The Ground Source Heat Pump(GSHP) air-conditioning system has been a kind of new technology to save energy and protect environment. This paper gives an overview of technology economy analysis on GSHPAir-conditioning System and optimization design of its ground heat exchanger, which provide helpful suggestion to engineers.First, this paper gives an overview of the history of GSHP system in China and foreign countries. Based on the work principle of the GSHP system, thecharacteristics of three circulations have been proposed, which are the use of renewable energy saving and environmental friendly, etc. hi terms of technology economy, the GSHPair-conditioning system was compared with the air source heat pump system, the water source heat pump system and the traditional central air-conditioningsystem. Main indexes are given to evaluate the technology economy of the GSHP air-conditioning system.A practical project was used as an example for the analysis.Ground-loop heat exchanger is an important part of the GSHP air-conditioning system and deferent from other traditional air-conditioning systems. This paper gave detailed designing method of Ground-loop heat exchanger, including load calculation, pipe layout, choice of tubes and its material, antifreeze method, calculation of pressure drop, etc. Taken the GSHP air-conditioning system in the report room of Shandong Institute of Architecture and Engineering as an example, its design was analyzed and the optimization design of ground-loop heat exchanger was proposed.The people attention to energy efficiency and environmental protection,which decide thesustainable development of the country.The Ground Source Heat Pump(GSHP)air-conditioning system has been a kind of new technology to save energy and protect environment.This paper gives an overview of technologyeconomy analysis on GSHP Air-condition System and optimization design of its ground heat exchanger,which provide helpful suggestion toengineersFirst,this paper gives an overview of GSHP system in China and foreign countries. Based on the work principle of the GSHP system,the characteristics of three circulations have been proposed,which are the use of renewable energy saving and environmental friendly,etc.In teams of technology ,the GSHP air-conditioning system was compared with the air source heat pump system,the water source heat pump system and the traditional central air-conditioning system.Main indexes are given to evaluate the technology economy of GSHP air-conditoning篇二：建筑施工毕业论文中英文资料外文翻译文献建筑施工毕业论文中英文资料外文翻译文献Building construction concrete crack of prevention and processingAbstractThe crack problem of concrete is a widespread existence but again difficult in solve of engineering actual problem, this text carried on a study analysis to a little bit familiar crack problem in the concrete engineering, and aim at concrete the circumstance put forward some prevention, processing measure. Keyword:Concrete crack prevention processing ForewordConcrete is formed by a sand and gravel aggregate,cement,water and other materials but mixed heterogeneous brittle materials.Because the concrete construction transform with oneself, control etc. a series problem, harden model of in the concrete existence numerous tiny hole, spirit cave and tiny crack, is exactly because these beginning start blemish of existence just make the concrete present one some not and all the characteristic of quality.The tiny crack is a kind of harmless crack and accept concrete heavy, impermeable and a little bit other use function not a creation to endanger.But after the concrete besubjected to lotus carry, difference in temperature etc. function, tiny crack would continuously of expand with connect, end formation we can see without the aid of instruments of macro view the crack be also the crack that the concrete often say in the engineering.Concrete building and Component all take sewer to make of, because of crack of existence and development usually make inner part of reinforcing bar etc. materialcreation decay, lower reinforced concrete material of loading ability, durable and impermeable ability, influence building of external appearance, service life, severity will threat arrive people's life and property safety.A lot of all of crash of engineerings is because of the unsteady development of the crack with the result that.Modern age science research with a great deal of of the concrete engineering practice certificate, in the concrete engineering crack problem is ineluctable, also acceptable in certainly of the scope just need to adopt valid of measure will it endanger degree control at certain of scope inside.Thereinforced concrete norm is also explicit provision:Some structure at place of dissimilarity under the condition allow existence certain the crack of width.But at under construction should as far as possible adopt a valid measure control crack creation, make the structure don't appear crack possibly or as far as possible decrease crack of amount and width, particularly want to as far as possible avoid harmful crack of emergence, insure engineering quality thus.Concrete crack creation of the reason be a lot of and have already transformed to cause of crack:Such as temperature variety, constringency, inflation, the asymmetry sink to sink etc. reason cause of crack;Have outside carry the crack that the function cause;Protected environment not appropriate the crack etc. caused with chemical effect.Want differentiation to treat in the actual engineering, work°out a problem according to the actual circumstance.In the concrete engineering the familiar crack and the prevention1.Shrinkage crack and preventionShrinkage crack much appear after the concrete protect be over of a period of time or concrete sprinkle to build to complete behind of around a week.In the cement syrup humidity of evaporate would creation Shrinkage, and this kind of constringency is can't negative.Shrinkage crack of the creation be main is because of concrete inside outside humidity evaporate degree dissimilarity but cause to transform dissimilarity of result:The concrete is subjected to exterior condition of influence, surface humidity loss lead quick, transform bigger, inner part degree of humidity variety smaller transform smaller, bigger surface Shrinkage transform to be subjected to concrete inner part control, creation more big pull should dint but creation crack.The relativehumidity is more low, cement syrup body Shrinkage more big, Shrinkage crack be more easy creation.Shrinkage crack is much surface parallel lines form or the net shallow thin crack, width many between 0.05-0.2 mm, the flat surface part much see in the big physical volume concrete and follow it more in thinner beam plank short to distribute.Shrinkage crackusually the impermeability of influence concrete, cause the durable of the rust eclipse influence concrete of reinforcing bar, under the function of the water pressure dint would creation the water power split crack influence concrete of loading dint etc..Concrete Shrinkage be main with water ash of the concrete ratio, the dosage of the composition, cement of cement, gather to anticipate of the dosage of the property and dosage, in addition etc. relevant.Main prevention measure:While being to choose to use the constringency quantity smaller cement, general low hot water mire and powder ash from stove cement in the adoption, lower the dosage of cement.Two is a concrete of Shrinkage be subjected to water ash ratio of influence more big, water ash ratio more big, Shrinkage more big, so in the concrete match the ratio the design should as far as possible control good water ash ratio of choose to use, the Chan add in the meantime accommodation of reduce water.Three is strict control concrete mix blend with under construction of match ratio, use of concrete water quantity absolute can't big in match ratio design give settle of use waterquantity.Four is the earlier period which strengthen concrete to protect, and appropriate extension protect of concrete time.Winter construction want to be appropriate extension concrete heat preservation to overlay time, and brushing protect to protect.Five is a constitution the accommodation is in the concrete structure of the constringency sew.2.Plastic shrinkage cracking and preventionPlastic shrinkage is the concrete is before condense, surface because of lose water quicker but creation of constringency.The Plastic shrinkage crack is general at dry heat or strong wind the weather appear, crack's much presenting in the center breadth, both ends of the thin and the length be different, with each other not coherent appearance.Shorter crack general long 20-30 cm, the longer crack can reach to a 2-3 m, breadth 1-5 mm.It creation of main reason is:The concrete is eventually almosthaving no strength or strength before the final setting very small, perhaps concrete just eventually final setting but strength very hour, be subjected toheat or compare strong wind dint of influence, the concrete surface lose water to lead quick, result in in the capillary creation bigger negative press but make a concrete physical volume sharply constringency, but at this time the strength of concrete again can't resist its constringency, therefore creation cracked.The influence concrete Plastic shrinkage of the main factors of crack to have water ash ratio, concrete of condense time, environment temperature, wind velocity, relative humidity...etc..Main prevention measure:One is choose to use dry compression value smaller higher silicate of the earlier period strength or common the portland cement.Two is strict the control water ash ratio, the Chan add to efficiently reduce water to increment the collapse of concrete fall a degree and with easy, decrease cement and water of dosage.Three is to sprinkle before building concrete, water basic level and template even to soak through.Four is in time to overlay the perhaps damp grass mat of the plastics thin film, hemp slice etc., keep concrete eventually beforethe final setting surface is moist, perhaps spray to protect etc. to carry on protect in the concrete surface.Five is in the heat and strong wind the weather to want to establish to hide sun and block breeze facilities, protect in time.3.Sink to sink crack and preventionThe creation which sink to sink crack is because of the structure foundation soil quality not and evenly, loose soft or return to fill soil dishonest or soak in water but result in the asymmetry sink to decline with the result that;Perhaps because of template just degree shortage, the template propped up to once be apart from big or prop up bottom loose move etc. to cause, especially at winter, the template prop up at jelly soil up, jelly the soil turn jelly empress creation asymmetry to sink to decline and cause concrete structure creation crack.This kind crack many is deep enter or pierce through sex crack, it alignment have something to do with sinking to sink a circumstance, general follow with ground perpendicular or present 30 °s-45 °Cape direction development, bigger sink tosink crack, usually have certain of wrong, crack width usually with sink to decline quantity direct proportion relation.Crack widthunder the influence of temperature variety smaller.The foundation after transform stability sink to sink crack also basic tend in stability.Main prevention measure:One is rightness loose soft soil, return to fill soil foundation a construction at the upper part structure front should carry on necessity of Hang solid with reinforce.Two is the strength that assurance template is enough and just degree, and prop up firm, and make the foundation be subjected to dint even.Three is keep concrete from sprinkle infusing the foundation in the process is soak by water.Four is time that template tore down to can't be too early, and want to notice to dismantle a mold order of sequence.Five is at jelly soil top take to establish template to notice to adopt certain of prevention measure.4.Temperature crack and preventionTemperature crack much the occurrence is in bigsurface or difference in temperature variety of the physical volume concrete compare the earth area of the concrete structure.Concrete after sprinkling to build, in the hardening the process, cement water turn a creation a great deal of of water turn hot, .(be the cement dosage is in the 350-550 kg/m 3, each sign square the rice concrete will release a calories of 17500-27500kJ and make concrete internal thus the temperature rise to reach to 70 ℃or so even higher)Because the physical volume of concrete be more big, a great deal of of water turn hot accumulate at the concrete inner part but not easy send forth, cause inner part the temperature hoick, but the concrete surface spread hot more quick, so formation inside outside of bigger difference in temperature, the bigger difference in temperature result in inner part and exterior hot the degree of the bulge or cooling dissimilarity, make concrete surface creation certain of pull should dint.When pull should dint exceed the anti- of concrete pull strength extreme limit, concrete surface meeting creation crack, this kind of crack much occurrence after the concrete under constructionperiod.In the concrete of under construction be difference in temperature variety more big, perhaps is a concrete to be subjected to assault of cold wave etc., will cause concrete surface the temperature sharply descend, but creation constringency, surface constringency of the concrete be subjected to inner part concrete of control, creation very big of pull should dint but creation crack, this kind篇三：建筑与环境设备工程外文翻译毕业论文（设计）题系部名称：专业班级：学生姓名：学指导教师：教师职称：外文翻译目：浅谈建筑环境与暖通空调能耗号：XX11014233 讲师 1浅谈建筑环境与暖通空调能耗摘要：研究建筑环境，了解暖通空调负荷产生的原因及影响因素，可以更加合理地提出解决问题的方法。
论文外文文献翻译
论文外文文献翻译以下是一篇700字左右的论文外文文献翻译：原文题目：The Role of Artificial Intelligence in Medical Diagnostics: A Review原文摘要：In recent years, there has been a growing interest in the use of artificial intelligence (AI) in the field of medical diagnostics. AI has the potential to improve the accuracy and efficiency of medical diagnoses, and can assist clinicians in making treatment decisions. This review aims to examine the current state of AI in medical diagnostics, and discuss its advantages and limitations. Several AI techniques, including machine learning, deep learning, and natural language processing, are discussed. The review also examines the ethical and legal considerations associated with the use of AI in medical diagnostics. Overall, AI has shown great promise in improving medical diagnostics, but further research is needed to fully understand its potential benefits and limitations.AI在医学诊断中发挥的作用：一项综述近年来，人工智能（AI）在医学诊断领域的应用引起了越来越多的关注。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
毕业设计（论文）外文文献翻译文献、资料中文题目：非常文献、资料英文题目：Extreme ASP.NE文献、资料来源：文献、资料发表（出版）日期：院（部）：专业：班级：姓名：学号：指导教师：翻译日期： 2017.02.14毕业设计(论文)外文资料翻译学院专业学生姓名班级学号外文出处附件：1.外文资料翻译译文；2.外文原文指导教师评价：1．翻译内容与课题的结合度：□优□良□中□差2．翻译内容的准确、流畅：□优□良□中□差3．专业词汇翻译的准确性：□优□良□中□差4．翻译字符数是否符合规定要求：□符合□不符合指导教师签名：年月日附件1：外文资料翻译译文非常1.1Web 部署项目当ASP 第一次发布时，Web 编程还比较困难，因为需要 IIS 来处理 ASP 页。
后来， 2.0 和 Visual Studio® 2005 通过引入网站开发模型使一切工作都变得容易了。
借助该网站模型，您不必在 Visual Studio 中创建新项目，而是可以指向一个目录并开始编写网页和代码。
此外，您还可以使用内置的 Development Server 快速测试站点， Development Server 将 寄宿在一个本地进程中，并消除了必须安装 IIS 才能进行开发这一先决条件。
该网站模型的魅力在于您在开发 Web 应用程序时无需考虑打包和部署。
需要其他类时怎么办？向 App_Code 目录添加一个 .cs 文件即可开始编写。
希望将可本地化的字符串存储在资源文件中时怎么办？向App_GlobalResources 目录添加一个 .resx 文件并键入字符串。
一切都顺顺当当；您根本就不必考虑编译和部署方面的事情。
在准备进行部署时，您有多种可选方案。
最简单的方案是将文件复制到主运行服务器并按要求编译每一个文件（和在测试环境中一样）。
第二种方案是使用aspnet_compiler.exe 实用工具将应用程序预编译为二进制版本，之后将只剩下要放到服务器上的一组程序集、静态内容和配置文件。
第三种方案也使用 aspnet_compiler.exe，但要创建一个可更新的二进制部署，其中 .as*x 文件保持不变（并且可修改），而所有代码文件都编译为二进制程序集。
这似乎涵盖了每一种可能的情况，开发人员可以一心一意地编写 Web 应用程序，而在以后实际部署时再作打包和部署决定。
不过，此模型也遭到了相当大的反对，特别是那些习惯了自己开发的 Web 项目是在实际项目文件中指定的实际项目的开发人员的反对，这些项目允许注入生成前和生成后函数、从生成过程排除文件以及使用命令行开关在调试和发布版本之间进行切换等操作。
有鉴于此，Microsoft 迅速推出了 Web 应用程序项目（即 WAP），最初它是作为 Visual Studio 2005 的插件发布的，现在包含在 Visual Studio 2005 Service Pack 1 (SP1) 中，Visual Studio 2005 Service Pack 1 (SP1) 可从/vstudio/support/vs2005sp1 下载。
WAP 可替代与 Visual Studio .NET 2005 Web 项目模型非常接近的网站模型。
新的WAP 模型会在生成过程中编译所有源代码文件，并在本地的 /bin 目录中生成一个用于部署的程序集。
WAP 还使得增量采用 2.0 引入的新的分部类代码隐藏模型变得更加容易，因为现在您可以打开 Visual Studio .NET 2003 项目，并且在转换过程中只修改 .sln 和 .csproj（或 .vbproj）文件。
然后可将每个文件及其代码隐藏类转换为与项目中任何其他文件都无关的新的分部类模型（操作方法是：在解决方案资源管理器中右键单击各个文件并选择“转换为 Web 应用程序”），也可以让它们仍然使用旧模型。
这与将 Visual Studio .NET 2003 Web 项目转换为网站模型大不相同，转换为网站模型会同时转换所有文件，并且不支持增量采用。
最后，还有一个称为“Web 部署项目”（本专栏的主题）的新项目类型，它引入了许多既针对网站项目又针对 Web 应用程序项目的附加部署选项。
Web 部署项目弥补了既针对网站应用程序又针对 Web 应用程序项目的部署选项中的遗留漏洞，并且可以简单而又可扩展地实现几乎任何部署方案。
为确切了解这一新项目类型增加了哪些内容，我们先来回顾一下在 Web 部署项目推出之前的情况。
使用网站模型生成应用程序时，您可以选择对部署站点进行预编译。
通过 Visual Studio 2005 中的“生成”|“发布”菜单或直接通过命令行实用工具aspnet_compiler.exe，您可以访问预编译实用工具。
显示了 Visual Studio 所显示的此工具的界面。
使用发布实用工具时必须作出的第一个决定是 .as*x 文件在部署后是否可更新（在aspnet_compiler.exe 命令行实用工具中使用 -u 开关的“允许更新此预编译站点”选项）。
此决定取决于在部署后是否希望能够在不重复整个部署过程的情况下对网页进行较少更改。
事实上，您可能希望明确禁止对已部署网页进行任何修改，并要求所有修改都要遵循标准的部署（也希望遵循标准的测试）过程，在这种情况下，应选择将站点发布为不可更新。
将站点发布为不可更新时，您可以完全删除所有 .as*x 文件，而只发布二进制程序集（以及配置文件和静态内容）。
不过，如果没有物理文件， 将无法确定哪些类要用于哪些端点请求。
例如，如果您的应用程序收到一个请求 Page1.aspx 的请求，而您已经使用了不可更新的二进制部署，则磁盘上很可能没有任何 Page1.aspx 文件，并且现有配置文件中没有任何内容来指示部署到 /bin 目录的程序集集合中哪个类应是该请求的实际处理程序。
为弥补这一缺陷，编译过程还将生成一个 .compiled 文件集合，这些文件以简单的 XML 格式包含端点-类型映射和文件依赖关系信息，同时这些文件必须与所部署站点的 /bin 目录中的二进制程序集一起发布。
例如，如果应用程序中原来有一个名为 Page1.aspx 的页，则 aspnet_compiler.exe 实用工具会生成一个名为piled（哈希代码不定）的文件，其中包含以下 XML：<?xml version="1.0" encoding="utf-8"?><preserve resultType="3"virtualPath="/SampleWebSite/Page1.aspx"hash="8a8da6c5a" filehash="42c4a74221152888"flags="110000" assembly="App_Web_aq9bt8mj"type="ASP.page1_aspx"><filedeps><filedep name="/SampleWebSite/Page1.aspx" /><filedep name="/SampleWebSite/Page1.aspx.cs" /></filedeps></preserve>使用此实用工具发布网站时必须作出的另一个重要决定是确定生成的程序集的打包粒度。
通过选中“使用固定命名和单页程序集”（或在 aspnet_compiler.exe 命令行实用工具中使用 -fixednames），既可为站点中的每个目录创建单独的程序集，又可为站点中的每个可编译文件创建单独的程序集。
作出该决定并不像您可能想像的那么容易，因为每个选项都有其潜在问题。
如果决定不使用 -fixednames 选项，则每次发布应用程序时都会生成一组全新的程序集，并且它们的名称与之前发布的程序集不同。
这意味着部署更加复杂，因为在部署新的程序集之前必须删除主运行服务器上所有以前发布的程序集，否则在处理下一个请求时将生成冗余的类定义错误。
使用 -fixednames 选项可以解决此问题，因为每个文件都将与命名清晰的程序集对应，而这些程序集在一次编译和下次编译中不会发生变化。
不过，如果站点规模较大，则为每个网页、控件和母版页分别生成单独的程序集，很明显意味着您要管理成百上千个程序集的发布。
Web 部署项目非常圆满地解决了部署中程序集粒度这一问题，如下所示。
您还可以将程序集签名引入编译过程，以便创建具有强名称的不同版本的程序集，如果需要这也适用于全局程序集缓存 (GAC) 中的部署。
通过使用 -aptca 选项，您可以使用程序集级别的属性 AllowPartiallyTrustedCallers 来标记生成的程序集，在将任何程序集部署到 GAC 并且以低等或中等信任级别运行 的情况下，这是必要的。
（请注意，此属性应仅应用于已证明不会暴露任何安全漏洞的程序集，因为如有漏洞，使用此属性可能招致引诱攻击。
）有关发布站点的另一个细节是如果决定使用 Web 应用程序项目而不使用网站模型，则“生成”|“发布”对话框的外观将大不相同。
Web 应用程序项目假定您希望将应用程序发布为可更新的 .as*x 文件和预编译的源文件（开发中它所使用的同一模型），因此仅针对二进制的部署选项不可用。
此实用工具实质上更接近于“复制网站”实用工具（随网站一起提供）而不是“发布网站”实用工具，因为它需要复制由标准生成过程生成的文件。
从技术上讲，即使您使用 Web 应用程序项目，也不会限制您使用仅针对二进制（不可更新）的部署。
其实，WAP 生成的输出是一个有效的网站，然后您可以传递aspnet_compiler.exe 实用工具来生成创建二进制部署。
幸运的是，您只是不能从 Web 部署项目调整过的 Visual Studio 2005 界面调用它而已。
Web 部署项目那么迄今为止所有现有的编译和部署选项中缺少什么呢？主要缺少两种功能：控制程序集命名（特别是为了进行部署）的功能，以及将所有输出的程序集合并为一个程序集从而简化部署的功能。
Web 部署项目可以解决这两个问题。
但或许更重要的是，它们还与网站应用程序和 Web 应用程序项目的部署问题中的许多遗留问题有关。
它们的核心是，Web 部署项目（可从 /aa336619.aspx 下载）代表的只是向您解决方案中添加的另一个项目类型。