英文购销合同范本

合集下载

英文销售合同模板3篇

英文销售合同模板3篇篇1Seller: ________ (Seller's Name)Buyer: ________ (Buyer's Name)This Sales Contract is made on ________ (Date) by and between the Seller and the Buyer:WHEREAS the Seller is willing to sell and the Buyer is willing to purchase the under mentioned commodity according to the terms and conditions stipulated below:I. commodity:The Seller agrees to sell and the Buyer agrees to purchase the following commodity:_______ (Commodity details, including product name, model, quantity, specifications, quality, etc.)II. Origin of the Goods: ________ (Origin of Goods)III. Price and Payment Terms:The Price of the commodity is to be fixed as ________ (Price) only. The payment shall be made as follows:1. A deposit of 10% of the total contract value shall be paid by the Buyer to the Seller's account within ________ (Time Limit) after this contract is signed.2. The balance of payment shall be made by the Buyer against the Seller's presentation of shipping documents through a bank in ________ (Bank Name) within ________ (Time Limit) after the date of shipment.IV. Delivery:篇2SALES CONTRACTThis Sales Contract is made by and between the following two parties:Buyer: ______________ (Hereinafter referred to as "Party A")Seller: ______________ (Hereinafter referred to as "Party B")In accordance with the principles of sincerity and mutual benefit and the relevant laws and regulations, both parties,through friendly consultations, agree to the following terms and conditions for the sale of products:Article 1: Product Description and QuantityProduct name: _______________Product specifications: _______________Product quantity: _______________ (Number of items)Delivery date: _______________Other specific requirements: _______________ (If any)Article 2: Price and Payment TermsTotal contract value: USD _______________ (The total contract value should be clearly stated)Price terms: FOB/CIF/CFR _______________ (Price terms should be clearly stated)Payment terms: _______________% T/T in advance,_______________% against the copy of B/L. Other payment methods such as L/C at sight are also acceptable.Article 3: Delivery and Shipping TermsDelivery time: _______________ (Delivery time should be clearly stated)Port of loading: _______________ (The port of loading should be clearly stated)Means of transportation: By sea/By air/By land, etc. (As agreed by both parties)Other shipping terms and conditions: _______________ (If any)Article 4: Quality Standards and WarrantyQuality standards: in accordance with the standards specified in the contract or the standards commonly used in the international market. If there is no such standard, it shall be agreed by both parties.Other specific quality requirements: _______________ (If any)Article 5: Inspection and AcceptanceArticle 6: Packing and MarkingArticle 7: Delay Delivery PenaltyArticle 8: Settlement of DisputesArticle 9: Other TermsBuyer Signature ____________________________________________ Date ___________________ Seller Signature____________________________________________ Date___________________ （Signature）（Date）（Signature）（Date）请注意，上述合同仅为示例并非专业法律意见。

关于英文销售合同范本6篇

关于英文销售合同范本6篇篇1Sales ContractThis Sales Contract (“Contract”) is made and entered into by and between Seller and Buyer on this day___________(date).1. Sale of Goods:Seller agrees to sell to Buyer, and Buyer agrees to purchase from Seller, the following goods:- Description of goods- Quantity- Price2. Payment Terms:Buyer shall pay Seller the total amount of $_____________ for the goods purchased. Payment shall be made in full within ______ days of the date of this Contract. Payment shall be made in the form of [cash, check, wire transfer, etc.].3. Delivery:Seller shall deliver the goods to Buyer at the following address:- Delivery addressDelivery shall be made on or before ____________(date). Time is of the essence in this Contract.4. Inspection:Buyer shall have the right to inspect the goods upon delivery. Buyer must notify Seller of any defects or nonconformities within _______ days of delivery.5. Warranties:Seller warrants that the goods:- Are free from defects in material and workmanship- Conform to the specifications set forth in this Contract- Are fit for the particular purpose for which they are intendedSeller’s liability under this warranty shall be limited to repairing or replacing the defective goods.6. Indemnification:Seller shall indemnify and hold Buyer harmless from and against any claims, damages, losses, liabilities, and expenses arising out of or related to the goods sold under this Contract, including but not limited to claims of infringement of intellectual property rights.7. Governing Law:This Contract shall be governed by and construed in accordance with the laws of the State of___________.8. Entire Agreement:This Contract constitutes the entire agreement between the parties with respect to the sale of the goods and supersedes all prior agreements, representations, and understandings.IN WITNESS WHEREOF, the parties have executed this Contract as of the date first above written.Seller____________________________Buyer____________________________This document reflects the entire agreement between Seller and Buyer for the sale of goods in question. It is recommended that both parties review this Contract carefully and seek legal advice if necessary before signing.篇2Sales ContractThis Sales Contract (“Contract”) is entered into on [Date] by and between [Seller], located at [Address] (“Seller”) and [Buyer], located at [Address] (“Buyer”).1. Sale of GoodsSeller agrees to sell to Buyer, and Buyer agrees to purchase from Seller, the following goods (the “Goods”): [Description of Goods] in the quantity and price set forth in Exhibit A attached hereto.2. DeliverySeller shall deliver the Goods to Buyer at the location specified by Buyer on [Delivery Date]. Buyer shall be responsible for all shipping costs.3. PaymentBuyer shall pay Seller the total purchase price for the Goods in the amount of [Total Amount], payable as follows: [Payment Terms]. Payment shall be made in [Currency] by [Payment Method].4. InspectionBuyer shall have [Number] days from the date of delivery to inspect the Goods. If Buyer finds any defects or nonconformities, Buyer shall notify Seller in writing within [Number] days of the delivery date. Seller shall have the option to refund Buyer or replace the defective Goods.5. Representations and WarrantiesSeller represents and warrants that the Goods are free from defects in materials and workmanship and are fit for the purpose intended.6. Limitation of LiabilityIn no event shall Seller be liable to Buyer for any indirect, special, incidental, or consequential damages arising out of or in connection with this Contract.7. Governing LawThis Contract shall be governed by and construed in accordance with the laws of [State/Country].8. Entire AgreementThis Contract constitutes the entire agreement between Seller and Buyer and supersedes any prior agreements or understandings.IN WITNESS WHEREOF, the parties hereto have executed this Sales Contract as of the date first above written.Seller: _____________________________Buyer: ______________________________Exhibit A: Description of Goods[Insert Description of Goods][Signatures]This Sales Contract is hereby executed by the parties as of the date first above written.Seller: _____________________________Buyer: ______________________________I. General Terms and ConditionsThis Sales Contract (the "Agreement") is entered into by and between [SELLER NAME] ("Seller") and [BUYER NAME] ("Buyer") on [SIGNING DATE] (the "Effective Date"). Seller and Buyer agree as follows:1. Sale, Quantity, and Description of Goods. Seller agrees to sell and Buyer agrees to purchase the goods (the "Goods") in the quantities and descriptions set forth in Exhibit A attached hereto.2. Purchase Price. The purchase price for the Goods shall be as set forth in Exhibit A and shall be paid to Seller in accordance with the payment terms set forth in Exhibit B.3. Delivery of Goods. The Goods shall be delivered by Seller to Buyer at the location specified by Buyer on or before the delivery date set forth in Exhibit A.4. Title and Risk of Loss. Title to and risk of loss for the Goods shall pass to Buyer upon delivery of the Goods by Seller to the carrier at the point of shipment.5. Inspection and Acceptance. Buyer shall have [NUMBER] days from the date of delivery of the Goods to inspect the Goods and to notify Seller of any nonconformities. Buyer's failure to notify Seller of any nonconformities within such period shall constitute acceptance of the Goods.6. Warranties. Seller hereby warrants that the Goods shall conform to the specifications set forth in Exhibit A and shall be free from defects in material and workmanship. Seller's liability under this warranty shall be limited to replacement of the nonconforming Goods.7. Limitation of Liability. In no event shall Seller be liable to Buyer for any special, consequential, or incidental damages arising out of or relating to this Agreement.8. Governing Law. This Agreement shall be governed by and construed in accordance with the laws of the State of [STATE].9. Entire Agreement. This Agreement constitutes the entire agreement between Seller and Buyer with respect to the sale of the Goods and supersedes all prior agreements or understandings, whether written or oral.IN WITNESS WHEREOF, the parties hereto have executed this Agreement as of the Effective Date.SELLER: BUYER:_________________________ _________________________[SELLER NAME] [BUYER NAME]Exhibit A: Description of Goods[DESCRIPTION OF GOODS]Exhibit B: Payment Terms[PAYMENT TERMS]II. Specific Provisions1. Termination. This Agreement may be terminated by either party upon [NUMBER] days written notice for any reason.2. Force Majeure. Neither party shall be liable for any failure or delay in performing its obligations under this Agreement to the extent such failure or delay is caused by circumstances beyond its reasonable control.3. Confidentiality. Seller and Buyer shall keep confidential all information received from the other party in connection with this Agreement and shall not disclose such information to any third party without the other party's prior written consent.4. Assignment. Neither party may assign its rights or obligations under this Agreement without the other party's prior written consent.5. Counterparts. This Agreement may be executed in one or more counterparts, each of which shall be deemed an original and all of which together shall constitute one and the same instrument.6. Modification. This Agreement may be modified only by a written instrument signed by both parties.IN WITNESS WHEREOF, the parties hereto have executed this Agreement as of the Effective Date.SELLER: BUYER:_________________________ _________________________[SELLER NAME] [BUYER NAME]篇3Sales ContractThis sales contract (the "Contract") is made and entered into on [date], by and between [Seller name], having its principal place of business at [Seller address] and [Buyer name], having its principal place of business at [Buyer address].1. Goods Sold: The Seller agrees to sell and deliver to the Buyer the following goods (the "Goods"):- [Description of goods]- Quantity: [Number of units]- Price: [Price per unit]2. Payment Terms: The Buyer agrees to pay the Seller the total amount of [total amount] for the Goods. Payment shall be made in [currency] within [number] days of the delivery of the Goods.3. Delivery: The Seller agrees to deliver the Goods to the Buyer at the following location: [Delivery address]. Delivery shall be made on or before [delivery date].4. Inspection: The Buyer shall have the right to inspect the Goods upon delivery. If the Goods are not in conformity with the Contract, the Buyer may reject the Goods and notify the Seller within [number] days.5. Warranty: The Seller warrants that the Goods are free from defects in materials and workmanship. If any defects are found within [warranty period], the Seller shall replace the Goods at no additional cost to the Buyer.6. Governing Law: This Contract shall be governed by the laws of [State/Country]. Any disputes arising out of or in connection with this Contract shall be resolved through arbitration in [City], in accordance with the rules of the [Arbitration association].7. Entire Agreement: This Contract constitutes the entire agreement between the parties and supersedes all prior agreements and understandings, whether written or oral, relating to the subject matter of this Contract.IN WITNESS WHEREOF, the parties hereto have executed this Sales Contract as of the date first above written.[Seller Signature] [Buyer Signature]篇4Sales ContractThis Sales Contract (hereinafter referred to as the "Contract") is made and entered into on [Date], by and between [Seller], with a business address at [Address], and [Buyer], with a business address at [Address].1. Sale of Goods: The Seller agrees to sell and the Buyer agrees to purchase the following goods: [Description of Goods]2. Price: The total purchase price for the goods shall be [Price]. The price is inclusive of all taxes, duties, and other charges.3. Delivery: The Seller shall deliver the goods to the Buyer at [Delivery Location] on or before [Delivery Date]. The Buyer shall bear any additional costs for expedited delivery.4. Payment: The Buyer shall pay the total purchase price in full upon delivery of the goods. Payment shall be made in [Currency] by [Payment Method].5. Warranties: The Seller warrants that the goods shall be free from defects in material and workmanship for a period of [Warranty Period]. The Seller shall repair or replace any defective goods at no additional cost to the Buyer.6. Indemnification: The Seller shall indemnify and hold harmless the Buyer from any claims, damages, or liabilities arising from the use or sale of the goods.7. Governing Law: This Contract shall be governed by the laws of [Jurisdiction]. Any disputes arising out of or relating to this Contract shall be resolved through arbitration in [Arbitration Location].8. Entire Agreement: This Contract constitutes the entire agreement between the parties with respect to the sale of goods and supersedes all prior agreements, written or oral.IN WITNESS WHEREOF, the parties have executed this Contract on the date first above written.Seller: ________________________Buyer: ________________________Date: ________________________This Sales Contract is a legally binding agreement between the Seller and the Buyer for the sale of goods. Both parties should carefully review and understand the terms and conditions before signing.篇5Sales contract1. Parties to the contract:This Sales Contract (hereinafter referred to as "Contract") is entered into between:Seller: [Name of the Seller]Registered address: [Address of the Seller]Contact person: [Name of the Contact person]Telephone: [Contact number]Email: [Email address]Buyer: [Name of the Buyer]Registered address: [Address of the Buyer]Contact person: [Name of the Contact person]Telephone: [Contact number]Email: [Email address]2. Product details:The Seller agrees to sell and the Buyer agrees to purchase the following products:Product name: [Name of the product]Description: [Brief description of the product]Quantity: [Quantity of the product]Unit price: [Price per unit]Total price: [Total price of the products]3. Payment terms:The Buyer agrees to pay the total amount of the products to the Seller in the following manner:- 30% of the total amount as a deposit upon signing of the contract- 70% of the total amount upon delivery of the productsPayment method: [Payment method]Currency: [Currency]Payment deadline: [Deadline for payment]4. Delivery terms:The Seller agrees to deliver the products to the Buyer at the following address:Delivery address: [Address of delivery]Delivery method: [Method of delivery]Delivery time: [Time of delivery]5. Quality assurance:The Seller guarantees that the products supplied under this Contract meet the required quality standards. In case of any defects or non-conformities, the Seller agrees to replace or refund the affected products.6. Governing law:This Contract shall be governed by and construed in accordance with the laws of [Jurisdiction].7. Dispute resolution:Any disputes arising out of or in connection with this Contract shall be settled amicably through negotiations between the Parties. If no resolution can be reached, the Parties agree tosubmit the dispute to arbitration in accordance with the rules of [Arbitration Institution].8. Miscellaneous:This Contract constitutes the entire agreement between the Parties and supersedes any previous agreements or understandings, written or oral, relating to the subject matter hereof.In witness whereof, the Parties have executed this Contract as of the date first above written.Seller:Signature: _____________________Printed name: _________________Date: _______________________Buyer:Signature: _____________________Printed name: _________________Date: _______________________篇6Sales ContractThis Sales Contract ("Contract") is made and entered into as of [Contract Date], by and between [Seller], a company incorporated under the laws of [Seller's Country], with its principal place of business at [Seller's Address], and [Buyer], a company incorporated under the laws of [Buyer's Country], with its principal place of business at [Buyer's Address].1. Sale of Goods: Seller agrees to sell and Buyer agrees to purchase the goods described in Exhibit A attached hereto (the "Goods").2. Price: The Purchase Price shall be as set forth in Exhibit A, and shall be paid by Buyer to Seller in the manner set forth in Exhibit A.3. Delivery: Seller shall deliver the Goods to Buyer at the location set forth in Exhibit A. Delivery shall be made on or before the delivery date set forth in Exhibit A.4. Acceptance: Buyer shall inspect the Goods promptly upon delivery. If Buyer finds any defects in the Goods, Buyer shall notify Seller within [number] days of delivery and provide Seller with a written description of the defects. Upon receiving suchnotice, Seller shall take reasonable steps to correct the defects in the Goods.5. Title and Risk of Loss: Title and risk of loss to the Goods shall pass to Buyer upon delivery of the Goods to Buyer.6. Warranty: Seller warrants that the Goods will conform to the specifications set forth in Exhibit A. Seller further warrants that the Goods will be free from defects in materials and workmanship for a period of [number] months from the date of delivery.7. Limitation of Liability: In no event shall Seller be liable to Buyer for any indirect, special, incidental, consequential or punitive damages arising out of or in connection with this Contract, whether or not Seller has been advised of the possibility of such damages.8. Governing Law: This Contract shall be governed by and construed in accordance with the laws of [Jurisdiction].9. Entire Agreement: This Contract represents the entire agreement between the parties with respect to the sale of the Goods, and supersedes all prior agreements and understandings, whether written or oral.IN WITNESS WHEREOF, the parties have executed this Sales Contract as of the date first above written.[Seller]By: _______________________Name: _________________Title: _________________[Buyer]By: _______________________Name: _________________Title: _________________EXHIBIT AGoods: [Description of Goods]Purchase Price: [Price]Delivery Date: [Date]Delivery Location: [Address]。

销售合同英文范本6篇

销售合同英文范本6篇篇1SALES CONTRACTThis Sales Contract is made by and between the Buyer and the Seller:Buyer:Seller:WHEREAS the Seller is the owner of a certain quantity of goods described in this Contract and desires to sell and the Buyer agrees to buy the same on the terms and conditions stipulated below:1. PRODUCTS AND QUANTITYThe Seller agrees to sell and the Buyer agrees to purchase the following goods: [Specify the product name, model number, specifications, quantity, etc.] The total quantity to be sold and purchased shall be clearly stated in the invoice.2. PRICE AND PAYMENTThe price of the goods shall be as per the list attached to this Contract. The total amount payable by the Buyer to the Seller shall be [specify the total amount]. Payment terms are as follows: [Insert terms such as deposit payment prior to delivery, full payment upon delivery, etc.] All banking fees shall be borne by the party designated for payment.3. DELIVERY AND TIME OF DELIVERYThe Seller shall deliver the goods to the Buyer at the agreed place of delivery within [specify a reasonable time frame]. Any delay in delivery must be notified to the Buyer in writing. The risk of loss or damage to the goods shall pass to the Buyer upon delivery.4. QUALITY AND GUARANTEEThe Seller guarantees that the goods are new and of good quality, free from defects in material and workmanship, and comply with all applicable specifications and standards. The Seller shall replace any goods found defective within a reasonable period after delivery.5. PACKAGING AND MARKINGThe Seller shall pack the goods properly and ensure that they are clearly marked with necessary identification marks, labels, and other necessary information. The cost of packaging shall be borne by the Seller unless otherwise agreed by the Buyer.6. INSPECTION AND ACCEPTANCEThe Buyer has the right to inspect the goods during production and prior to delivery. Upon receipt of the goods, the Buyer shall have a reasonable period to inspect and accept or reject the goods in accordance with this Contract. Any rejected goods must be returned to the Seller at the Seller's cost and risk.7. FORCE MAJEURENeither party shall be liable for failure to perform any obligation under this Contract due to causes beyond their reasonable control, such as acts of war, riots, strikes, floods, fire, etc. However, the affected party shall notify the other party promptly in writing and provide evidence of such occurrence.8. CONFIDENTIALITY AND NON-DISCLOSUREBoth parties shall keep confidential all information related to this Contract that is not intended for public disclosure and shallnot disclose it to any third party without the prior written consent of the other party.9. TERMINATIONThis Contract may be terminated by either party in writing if there is a breach of any term or condition by the other party that cannot be rectified within a reasonable period of time. Termination shall not affect any obligation that has already been incurred by either party prior to termination.10. MISCELLANEOUSThe Buyer The Seller(Authorized Representative) (Authorized Representative)Date: Date:Signature: Signature:Company Name: Company Name:Address: Address:Telephone No.: Telephone No.:Email Address: Email Address: 邮件地址篇2SALES CONTRACTThis Sales Contract is made by and between the Buyer and the Seller:Buyer:Seller:WHEREAS the Seller is willing to sell the products listed in this Contract to the Buyer, and the Buyer is willing to purchase the same products under the terms and conditions stipulated below:1. Products and Specifications:The Seller agrees to sell and the Buyer agrees to purchase the products with the specifications listed in Annex A attached to this Contract.2. Quantity and Price:The Seller agrees to sell the products in the quantity specified in Annex A at the prices specified therein. The prices are fixed and firm for the duration of this Contract.3. Terms of Payment:Payment shall be made by the Buyer to the Seller as follows: __% (percentage) of the total contract value upon signing of this Contract; __% (percentage) upon delivery of the goods; and the balance upon receipt of the Seller's performance bond or other guarantee documents. All payments shall be made in the currency specified in Annex B.4. Delivery:The Seller shall deliver the products to the port specified in Annex C within the time agreed upon in this Contract. The Seller shall be responsible for arranging transportation of the goods and shall bear all expenses related to delivery.5. Quality Inspection and Warranty:The Seller guarantees that all products are new and of good quality, free from any defects, and comply with all applicable specifications and standards. The Seller shall provide necessary quality inspection certificates and other documents. The Buyer shall have the right to conduct its own quality inspections at the loading port.6. Packing and Marking:The Seller shall pack the products in a proper manner to ensure safe transportation to the port specified in Annex C. The packages shall be properly marked with contract number, product name, quantity, weight, and other necessary information.7. Risk and Insurance:Risk of loss or damage to the products shall pass to the Buyer upon delivery at the port specified in Annex C. The Seller shall arrange for insurance of the goods during transportation at its own cost. The insurance shall cover at least 110% of the total contract value against all risks commonly covered for such goods. The insurance certificate shall be handed over to the Buyer on delivery of the goods.8. Terms of Settlement for Disputes:篇3SALES CONTRACTThis Sales Contract is made by and between the Buyer and the Seller:Buyer:Seller:WHEREAS the Seller is willing to sell the products listed in this Contract to the Buyer, and the Buyer is willing to purchase the same products from the Seller,NOW THEREFORE, the parties hereby agree as follows:Article 1: Contract ProductThe product to be sold under this Contract is [describe the product in detail]. The specifications and quantity of the product are listed in the attached schedule.Article 2: Price and PaymentThe price of the product shall be as stated in the attached schedule. The payment shall be made through [specify payment method] within [specify time frame] after the date of delivery.Article 3: Delivery and ShippingThe Seller shall deliver the product to the Buyer at the shipping address specified by the Buyer. The delivery date shall be as stated in the attached schedule. Shipping and transportation risks shall be borne by [specify which party bears these risks].Article 4: Quality and InspectionThe Seller shall ensure that the product meets the quality standards specified in this Contract. The Buyer shall have the right to inspect the product during production and upon delivery. If any defects are found, the Seller shall promptly replace or repair the product.Article 5: ConfidentialityBoth parties shall keep confidential all information related to this Contract that is not intended for public disclosure. Neither party shall disclose such information to any third party without the prior written consent of the other party.Article 6: Force MajeureNeither party shall be liable for failure to perform its obligations under this Contract due to force majeure events, such as natural disasters, wars, riots, or government policies, provided that the affected party promptly notifies the other party of such events and takes reasonable measures to mitigate their effects.Article 7: Warranty and After-Sales ServiceThe Seller shall provide a warranty period of [specify duration] for the product. During this period, any defects in material or workmanship shall be repaired or replaced free ofcharge. The Seller shall also provide after-sales service as specified in the attached schedule.Article 8: TerminationThis Contract may be terminated by either party giving written notice to the other party in case of fundamental breach by either party. The party seeking termination shall give reasonable notice and provide evidence of such breach. The provisions of this Contract concerning confidentiality, warranty, and any obligations arising prior to termination shall survive termination.Article 9: Jurisdiction and LawThis Contract shall be governed by the laws of [specify country/jurisdiction]. Any disputes arising out of or in connection with this Contract shall be settled through friendly negotiation. If no settlement can be reached, either party may submit such disputes to [specify court/arbitration institution] for resolution.Article 10: MiscellaneousThis Contract constitutes the entire agreement between the parties for the sale of the product. No modification or amendment shall be binding unless made in writing and signedby both parties. This Contract is made in [specify language] only, and any translation provided for reference only.IN WITNESS WHEREOF, the parties have executed this Contract by their authorized representatives on the dates specified below.Buyer:(Authorized Representative)Date:Seller:(Authorized Representative)Date:[Note: This is a general sales contract template and may need to be modified to fit specific circumstances.]篇4SALES CONTRACTThis Sales Contract is made by and between the Buyer and the Seller:Buyer:Seller:WHEREAS the Seller is willing to sell the products listed in this Contract to the Buyer, and the Buyer is willing to purchase the same products from the Seller on the terms and conditions stipulated below:1. Products and Specifications:The Seller agrees to sell and the Buyer agrees to purchase the products with the following specifications: [specific details of the products to be sold, including name, model, quantity, quality, specifications, etc.].2. Price and Payment:The total contract price is [specify the total contract price]. The payment terms are as follows: [describe the payment terms, e.g., 30% advance payment, balance upon delivery, payment through bank transfer or other methods].3. Delivery:The Seller shall deliver the products to the Buyer at the following address: [delivery address]. The delivery date shall be [specify the delivery date]. Any delay in delivery shall be notified to the Buyer in advance.4. Quality Assurance:The Seller guarantees that the products are of good quality and comply with all applicable standards. The Seller shall be responsible for any defects in material or workmanship.5. Warranty:The Seller warrants that the products are new and not previously used. The Seller shall replace any defective products or make necessary repairs during the warranty period.6. Force Majeure:In case of force majeure events, such as natural disasters, war, political unrest, etc., which prevent or hinder the performance of this Contract, the Seller shall notify the Buyer immediately and seek to resolve the issue as soon as possible.7. Confidentiality:Both parties shall keep confidential all information related to this Contract, including product specifications, pricing, and business strategies.8. Termination:This Contract may be terminated by either party in case of breach of any term or condition by the other party. The partyseeking termination shall provide a written notice to the other party specifying the reasons for termination.9. Disputes:Any disputes arising out of or in connection with this Contract shall be settled through friendly consultation. If no settlement can be reached, either party may submit the dispute to [specify court/tribunal] for resolution.10. Miscellaneous:This Contract is made in duplicate originals, each party holding one original. This Contract shall be governed by and construed in accordance with the laws of [specifycountry/jurisdiction]. Any amendment or modification to this Contract shall be made in writing and signed by both parties. This Contract is effective from the date of signing by both parties.Buyer: _____________________Seller: _____________________Date: _____________________篇5SALES CONTRACT销售合同This Sales Contract is made by and between [买方名称], hereinafter referred to as "Buyer" and [卖方名称], hereinafter referred to as "Seller", whereby both parties agree as follows:一、商品条款Article 1: Commodity1. 商品名称：____________________（请填写商品名称）2. 商品规格：____________________（请填写商品规格）3. 单位价格：____________________（请填写单价）4. 总金额：（小写）____________________ （大写）____________________（人民币）二、价格与货币条款Article 2: Price and Terms of Payment1. 除非另有规定，“CIP价格”应包括卖方将货物交运至指定的目的地的所有成本与费用，包括运输成本及保险费。

英文购销合同范本6篇

英文购销合同范本6篇篇1Sales ContractThis Sales Contract is made and entered into on this [date] by and between [Seller], with its principal place of business located at [address], hereinafter referred to as the "Seller", and [Buyer], with its principal place of business located at [address], hereinafter referred to as the "Buyer".1. Product DescriptionThe Seller agrees to sell and the Buyer agrees to purchase the following products:- Description of product 1: [specifications]- Description of product 2: [specifications]- Description of product 3: [specifications]2. QuantityThe Buyer agrees to purchase a total quantity of [quantity] units of the above-mentioned products.3. PriceThe total price for the products shall be [total price] USD, inclusive of all taxes and duties. Payment shall be made in [currency] through [payment method].4. DeliveryThe Seller shall deliver the products to the Buyer's designated location at [address] within [number] days of the signing of this contract. The Seller shall bear all costs and risks of transportation.5. Quality AssuranceThe Seller guarantees that all products delivered shall meet the required specifications and quality standards as agreed upon in this contract. The Buyer has the right to inspect the products upon delivery and reject any non-conforming products.6. WarrantyThe Seller warrants that the products sold are free from defects in material and workmanship and shall comply with all applicable laws and regulations. Any defective products shall be replaced by the Seller at no cost to the Buyer.7. ConfidentialityBoth parties agree to maintain the confidentiality of all information exchanged during the course of this contract and not disclose any proprietary information to third parties without prior written consent.8. Governing LawThis Sales Contract shall be governed by and construed in accordance with the laws of [jurisdiction].In witness whereof, the parties hereto have executed this contract as of the date first above written.Seller: ________________________ Date: ___________Buyer: ________________________ Date: ____________This Sales Contract contains the entire agreement between the Seller and Buyer and supersedes all prior agreements and understandings, whether written or oral.篇2Sample English Sales and Purchase ContractThis Sales and Purchase Contract is entered into on [Date] by and between:Seller: [Name of Seller]Address: [Seller's Address]Contact: [Seller's Contact Information]Buyer: [Name of Buyer]Address: [Buyer's Address]Contact: [Buyer's Contact Information]1. Product Description:The Seller agrees to sell and the Buyer agrees to purchase the following products:- Product Name: [Name of Product]- Quantity: [Number of Units]- Description: [Detailed Description of Product]2. Price:The total purchase price for the products listed above is [Total Price], which includes all applicable taxes and shipping fees. Payment shall be made in [Currency] by [Payment Method], with [Details of Payment Terms].3. Delivery:The Seller agrees to deliver the products to the Buyer's address at [Delivery Address] within [Delivery Timeframe]. The Buyer shall be responsible for any customs duties or taxes imposed upon the products.4. Inspection and Acceptance:The Buyer shall inspect the products upon delivery and shall have [Number of Days] days to notify the Seller of any defects or discrepancies. Failure to do so shall constitute acceptance of the products.5. Warranty:The Seller warrants that the products shall conform to the description provided and shall be free from any defects in materials or workmanship for a period of [Warranty Period]. The Seller's sole liability under this warranty shall be to repair or replace any defective products.6. Liability:Neither party shall be liable for any indirect, incidental, or consequential damages arising from the sale or purchase of the products.7. Governing Law:This contract shall be governed by the laws of [Jurisdiction].8. Entire Agreement:This contract constitutes the entire agreement between the parties and supersedes any prior agreements or understandings, whether written or oral.IN WITNESS WHEREOF, the parties hereto have executed this Sales and Purchase Contract as of the date first above written.Seller: _________________________Buyer: _________________________篇3Sales and Purchase ContractThis Sales and Purchase Contract is entered into on this [date] day of [month], [year], between [seller], with its principal place of business located at [address], hereinafter referred to as the "Seller," and [buyer], with its principal place of business located at [address], hereinafter referred to as the "Buyer."1. Products: The Seller agrees to sell and the Buyer agrees to purchase the following products: [list of products].2. Quantity: The Buyer agrees to purchase [quantity] of the products as specified in clause 1.3. Price: The parties agree that the price for the products shall be [price per unit] per unit. The total purchase price shall be [total price].4. Payment: The Buyer agrees to pay the total purchase price within [number] days of the signing of this agreement.5. Delivery: The Seller agrees to deliver the products to the Buyer at [delivery location] on or before [delivery date]. The Buyer shall be responsible for any shipping costs incurred.6. Inspection and Acceptance: The Buyer shall have [number] days from the date of delivery to inspect the products and notify the Seller of any defects or discrepancies. Failure to notify the Seller within this timeframe shall constitute acceptance of the products.7. Title and Risk of Loss: Title to the products shall pass to the Buyer upon delivery. The risk of loss shall remain with the Seller until delivery.8. Warranty: The Seller warrants that the products are free from defects in materials and workmanship. The Seller's liabilityunder this warranty shall be limited to the replacement or repair of defective products.9. Governing Law: This agreement shall be governed by the laws of [state/country].10. Entire Agreement: This agreement constitutes the entire understanding between the parties and supersedes all prior agreements or understandings.IN WITNESS WHEREOF, the parties hereto have executed this Sales and Purchase Contract as of the date first above written.[Signature of Seller] [Signature of Buyer][Name of Seller] [Name of Buyer]篇4Sales and Purchase ContractThis Sales and Purchase Contract (the "Contract") is made on this [Date], by and between:Seller: [Seller's Name]Address: [Seller's Address]Contact number: [Seller's contact number]Email: [Seller's Email]Buyer: [Buyer's Name]Address: [Buyer's Address]Contact number: [Buyer's contact number]Email: [Buyer's Email]Hereinafter referred to as the "Parties".1. Subject of the ContractThe Seller agrees to sell and the Buyer agrees to purchase the following goods:- Description of Goods:- Quantity:- Price per unit:- Total Price:2. DeliveryThe Seller shall deliver the goods to the Buyer's address as follows:- Delivery date:- Delivery method:- Delivery cost:3. PaymentThe Buyer agrees to pay the Seller the total price of the goods in the following manner:- Payment method:- Payment terms:- Due date:4. Inspection and AcceptanceUpon delivery of the goods, the Buyer shall inspect the goods and notify the Seller of any defects or discrepancies within [number] days. Failure to do so shall constitute acceptance of the goods.5. WarrantiesThe Seller warrants that the goods are free from defects in materials and workmanship and conform to the specifications provided. The Seller further warrants that they have good title to the goods and have the right to sell them to the Buyer.6. Governing LawThis Contract shall be governed by the laws of[State/Country] and any disputes arising out of this Contract shall be resolved through arbitration.7. Entire AgreementThis Contract constitutes the entire agreement between the Parties and supersedes any prior agreements or understandings, whether written or oral.In witness whereof, the Parties hereto have executed this Contract on the date first above written.Seller: ________________________ Date: ___________Buyer: ________________________ Date: ___________This Sales and Purchase Contract is hereby accepted and approved by both Parties.[Signature of Seller][Signature of Buyer][Name of Signatory][Title of Signatory]篇5Sales and Purchase ContractThis Sales and Purchase Contract (the "Contract") is entered into on [date], by and between [Seller], having its principal place of business at [address] ("Seller"), and [Buyer], having its principal place of business at [address] ("Buyer").1. Sale of GoodsSeller agrees to sell, and Buyer agrees to purchase, the following goods (the "Goods"):Description: [Description of goods]Quantity: [Quantity of goods]Unit Price: [Price per unit]Total Price: [Total price]2. DeliveryThe Goods shall be delivered by Seller to Buyer at [delivery location] on or before [delivery date]. Delivery shall be made during normal business hours, unless otherwise agreed upon by both parties.3. Inspection and AcceptanceBuyer shall have the right to inspect the Goods upon delivery. Buyer must notify Seller of any non-conformities within [number]days of delivery. If no notice is given, Buyer shall be deemed to have accepted the Goods.4. PaymentBuyer agrees to pay Seller the total price of the Goods in full within [number] days of delivery. Payment shall be made in [currency] by [method of payment]. Late payments shall incur a late fee of [percent]% per week.5. Risk of LossRisk of loss of the Goods shall pass from Seller to Buyer upon delivery.6. WarrantiesSeller warrants that the Goods are free from defects in material and workmanship. If any defects are found within [number] days of delivery, Seller shall replace the defective Goods at no additional cost to Buyer.7. Governing LawThis Contract shall be governed by and construed in accordance with the laws of [state/country].8. Entire AgreementThis Contract constitutes the entire agreement between the parties with respect to the sale and purchase of the Goods and supersedes all prior agreements and understandings, whether oral or written.IN WITNESS WHEREOF, the parties hereto have executed this Contract as of the date first written above.Seller: ___________________________[Name and Title]Buyer: ___________________________[Name and Title]篇6Purchase and Sale ContractThis Purchase and Sale Contract (the "Contract") is entered into as of [Date], by and between [Seller], with a principal place of business at [Address], and [Buyer], with a principal place of business at [Address].1. Sale of Goods: Seller agrees to sell and Buyer agrees to purchase the goods described as follows: [Description of Goods]. The goods shall be delivered by Seller to Buyer at [Delivery Location] on [Delivery Date].2. Price: The purchase price for the goods shall be [Price] per unit. Payment shall be made by Buyer to Seller in [Currency] within [Number] days of delivery of the goods.3. Delivery: The goods shall be delivered by Seller to Buyer at the Delivery Location on the Delivery Date. Buyer shall have the right to inspect the goods upon delivery and shall notify Seller of any defects or non-conformities within [Number] days.4. Title and Risk of Loss: Title to and risk of loss of the goods shall pass from Seller to Buyer upon delivery of the goods at the Delivery Location.5. Warranties: Seller warrants that the goods shall conform to the description provided and shall be free from defects in materials and workmanship. Seller further warrants that Seller has good and marketable title to the goods and has the right to sell the goods to Buyer.6. Indemnification: Seller shall indemnify and hold Buyer harmless from and against any claims, damages, losses, and expenses arising out of Seller's breach of any warranty or representation in this Contract.7. Governing Law and Jurisdiction: This Contract shall be governed by and construed in accordance with the laws of[Jurisdiction]. Any disputes arising under this Contract shall be resolved by arbitration in [Jurisdiction], in accordance with the rules of the [Arbitration Body].8. Entire Agreement: This Contract constitutes the entire agreement between the parties with respect to the sale and purchase of the goods and supersedes all prior agreements and understandings, whether written or oral.IN WITNESS WHEREOF, the parties have executed this Contract as of the date first above written.Seller: [Name]Buyer: [Name]Date: [Date]。

购销英文合同范本三篇

购销英文合同范本三篇篇一Purchase and Sale ContractContract No.: [具体合同编号]Date: [签订日期]Seller (Party A):Name: [卖方公司名称]Address: [卖方地址]Contact Person: [联系人]Telephone: [联系电话]Fax:E: [电子]Buyer (Party B):Name: [买方公司名称]Address: [买方地址]Contact Person: [联系人]Telephone: [联系电话]Fax:E: [电子]Article 1: Commodity and SpecificationsParty A agrees to sell and Party B agrees to purchase the following modity: Commodity Name: [商品名称]Specifications: [具体规格]Quantity: [数量]Article 2: Price and Total AmountThe unit price of the modity is [具体单价] USD.The total amount of this transaction is [总价] USD.Article 3: Payment TermsParty B shall make the payment as follows:1. A deposit of [定金比例]% of the total amount, namely [定金金额] USD, shall be pd within [定金支付期限] days after the signing of this contract.2. The balance shall be pd within [尾款支付期限] days after the delivery of the modity.Article 4: Delivery Time and PlaceThe delivery time is [预计交付日期].The delivery place is [交付地点].Article 5: Quality Assurance and InspectionParty A guarantees that the modity conforms to the agreed specifications and quality standards. Party B has the right to inspect the modity within [检验期限] days after the delivery.Article 6: WarrantyParty A provides a [质保期限] -month warranty for the modity starting from the date of delivery.Article 7: Breach of ContractIf either party fls to fulfill its obligations under this contract, it shall be liable for the breach of contract and pensate the other party for the losses suffered.Article 8: Force MajeureNeither party shall be liable for flure or delay in performance of this contract due to force majeure events, such as natural disasters, wars, etc.Article 9: Dispute ResolutionAny disputes arising from this contract shall be resolved through friendly negotiation. If the negotiation fls, either party may submit the dispute to the arbitration institution for arbitration.Article 10: Other Provisions1. This contract is made in duplicate, with each party holding one copy.2. This contract shall e into effect upon the signature of both parties.Party A (Seal): [卖方盖章]Signature: [卖方代表签字]Party B (Seal): [买方盖章]Signature: [买方代表签字]篇二Purchase and Sale ContractContract No.: [具体合同编号]Date: [签订日期]Buyer (Party A):Name: [买方公司名称]Address: [地址]Contact Person: [联系人]Telephone: [电话]Fax:E:Seller (Party B):Name: [卖方公司名称]Address: [地址]Contact Person: [联系人]Telephone: [电话]Fax:E:Article 1: Commodity and SpecificationsParty A agrees to purchase from Party B, and Party B agrees to sell to Party A the following modity with the specifications as follows:Commodity Name: [商品名称]Specifications: [规格详情]Article 2: Quantity and Price1. Quantity: [具体数量]2. Unit Price: [单价]3. Total Price: [总价]Article 3: Quality and StandardsThe modity shall conform to the quality standards and specifications as mutually agreed upon both parties. Party B guarantees that the modity is free from defects in materials and workmanship.Article 4: Delivery1. Delivery Date: [交货日期]2. Delivery Location: [交货地点]3. Party B shall be responsible for the transportation and bear the related costs.Article 5: Payment Terms1. Party A shall make payment to Party B within [具体天数] days after the receipt of the modity and the invoice.2. Payment Method: [付款方式，如电汇、信用证等]Article 6: Inspection and AcceptanceParty A shall have the right to inspect the modity upon receipt. If any non-conformity is found, Party A shall notify Party B within [具体天数] days.Article 7: WarrantyParty B provides a [具体时长] warranty for the modity. During the warranty period, Party B shall be responsible for repring or replacing the defective modity free of charge.Article 8: Force MajeureNeither party shall be liable for flure or delay in performance of this contract due to force majeure events such as natural disasters, wars, and government actions.Article 9: Dispute ResolutionAny disputes arising from this contract shall be settled through friendly negotiation. If negotiation fls, the dispute shall be submitted to the arbitration institution [具体仲裁机构] for arbitration.Article 10: Other Terms and Conditions1. This contract is made in duplicate, with each party holding one copy.2. This contract shall e into effect upon signature and seal of both parties.Party A (Seal): [买方盖章]Authorized Representative (Signature): [买方代表签字]Party B (Seal): [卖方盖章]Authorized Representative (Signature): [卖方代表签字]篇三Purchase and Sale ContractContract No.: [具体合同编号]Date: [签订日期]Buyer (Party A):Name: [买方公司名称]Address: [买方地址]Contact Person: [联系人]Telephone: [联系电话]Fax:E: [电子]Seller (Party B):Name: [卖方公司名称]Address: [卖方地址]Contact Person: [联系人]Telephone: [联系电话]Fax:E: [电子]Article 1 Commodity and SpecificationsParty A agrees to purchase from Party B, and Party B agrees to sell to Party A the following modity with the specifications and quantities as specified below: Commodity Name: [商品名称]Specifications: [详细规格]Quantity: [数量]Article 2 Price and Total AmountThe unit price of the modity is [具体单价] USD. The total amount of this contract is [总价] USD.Article 3 Payment Terms1. Party A shall make a deposit of [定金比例]% of the total amount within [规定日期] days after the signing of this contract.2. The balance payment shall be made within [规定日期] days after Party A receives the goods and checks them to be in conformity with the contract.Article 4 Delivery Time and Place1. Party B shall deliver the goods to the designated place within [交货日期] days after receiving the deposit.2. The delivery place is [具体交货地点].Article 5 Quality AssuranceParty B guarantees that the goods provided conform to the quality standards and specifications stipulated in this contract. During the warranty period, if there are any quality problems, Party B shall be responsible for repr or replacement.Article 6 Inspection and AcceptanceParty A shall inspect the goods within [验收日期] days after receiving them. If there are any objections, Party A shall notify Party B in writing within this period.Article 7 Force MajeureIf either party is unable to perform this contract due to force majeure events such as natural disasters, wars, etc., the affected party shall notify the other party in a timely manner and provide relevant evidence. The performance of the contract shall be postponed or cancelled depending on the circumstances.Article 8 Dispute ResolutionAny disputes arising from the execution of this contract shall be settled through friendly negotiation. If the negotiation fls, either party may file a lawsuit in the court of petent jurisdiction.Article 9 Contract ValidityThis contract shall e into effect upon signature and seal both parties and shall remn valid until the pletion of all obligations.Party A (Buyer): [盖章]Signature: [签字]Date: [日期]Party B (Seller): [盖章]Signature: [签字]Date: [日期]Please note that the above is a basic template and you should modify and adjust it according to the specific circumstances and requirements of your transaction. It is remended to consult a professional lawyer before signing any legally binding contract.。

英文版销售合同范本8篇

英文版销售合同范本8篇篇1SALES CONTRACTThis Sales Contract is made on [Date], between [Seller Name], a company duly organized and operating under the laws of [Seller Country], hereinafter referred to as "Seller" and [Buyer Name], a company duly organized and operating under the laws of [Buyer Country], hereinafter referred to as "Buyer".1. Scope of SupplyThe Seller agrees to sell and the Buyer agrees to purchase the products listed in Annex A, attached hereto, which shall be a part of this Contract. The specifications, quality, quantity, and other related details of the products are specified in Annex A.2. Price and Payment2.1 The total price for the products listed in Annex A shall be [Total Price] USD, which shall be paid by the Buyer to the Seller.2.2 Payment shall be made in USD via the method agreed by both parties, either wire transfer or other agreed means.2.3 The Buyer shall make the payment within [Payment Days] days from the date of signing this Contract.3. Delivery and Shipping3.1 The Seller shall deliver the products to the shipping port specified by the Buyer within [Delivery Days] days from the date of signing this Contract.3.2 Shipping costs shall be borne by the Buyer unless otherwise agreed by both parties.4. Quality AssuranceThe Seller guarantees that all products are in conformity with the specifications mentioned in Annex A and comply with international quality standards. The Seller shall provide necessary quality documents and certificates to the Buyer upon request.5. Warranty and售后支持The Seller shall provide a warranty period of [Warranty Period] months from the date of delivery for any defects in material or workmanship found in the products. During this period, the Seller shall replace or repair any defective products atits own cost. After the warranty period, the Seller shall provide technical support and maintenance services upon request.6. Contract Modification and Termination6.1 This Contract may be modified only by a written agreement signed by both parties.6.2 In case of any breach of Contract by either party, the other party may terminate this Contract with immediate effect upon notice to the default party.7. Law and JurisdictionThis Contract shall be governed by and construed in accordance with the laws of [Country]. Any disputes arising out of or in connection with this Contract shall be settled through friendly negotiation. If no settlement can be reached, either party may submit such disputes to the courts located in [Country/City].8. Miscellaneous8.1 All communications and notices related to this Contract shall be made in English.8.2 This Contract constitutes the entire understanding between the Seller and the Buyer, and no modification oramendment shall be made to this Contract except in writing and signed by both parties.8.3 This Contract is in duplicate, with each party holding one original copy. Each copy is equally valid and shall be binding on both parties.In conclusion, upon signing this Contract, both parties agree to its terms and conditions, and are fully bound by its provisions.Seller:Name: ________________________Address: ________________________Date: ________________Signature: ________________________Buyer:Name: ________________________Address: ________________________Date: ________________Signature: ________________________ANNEX A - PRODUCT LIST AND SPECIFICATIONS (To be attached separately)Please note that this Sales Contract template is for reference purposes only and may need to be customized based on specific business requirements and legal considerations. It is advisable to have a professional legal advisor review any contract before its execution.篇2Sales ContractThis Sales Contract is made on [Date] by and between [Seller's Name], a legal entity registered in [Seller's Country], with its registered office at [Seller's Address] (hereinafter referred to as "Seller"), and [Buyer's Name], a legal entity registered in [Buyer's Country], with its registered office at [Buyer's Address] (hereinafter referred to as "Buyer").Preamble:The Seller and the Buyer, through mutual understanding and negotiation, agree to conclude this contract for the sale ofproducts mentioned below. Both parties have verified the authenticity, legality, and conformity of the products, terms, conditions, and documents attached to this contract.Article 1: Contract Scope1.1 The Seller agrees to sell and the Buyer agrees to purchase the products listed in Annex A, which forms an integral part of this contract.1.2 The items, specifications, quantity, and unit prices of the products shall be as stated in Annex A.Article 2: Terms of Payment2.1 The payment terms shall be as agreed upon by both parties and stated in Annex B, which forms an integral part of this contract.2.2 Any changes to the payment terms must be agreed upon by both parties in writing.Article 3: Delivery and Inspection3.1 The Seller shall ensure timely delivery of the products in accordance with the terms agreed upon by both parties.3.2 The Buyer shall inspect the products immediately upon receipt and notify the Seller of any discrepancies within a reasonable period of time.Article 4: Warranty and Liability4.1 The Seller guarantees that the products are free from defects in material and workmanship and conform to the specifications mentioned in Annex A.4.2 If any defect is found in the products, the Seller shall, at its option, replace or repair them, free of charge, without any delay.Article 5: Force Majeure5.1 If either party is prevented from fulfilling its contractual obligations due to force majeure events, it shall notify the other party immediately and provide necessary evidence.5.2 The affected party shall strive to overcome the force majeure situation and resume performance as soon as possible.Article 6: Termination6.1 This contract shall be terminated only by mutual agreement in writing or in accordance with the applicable laws.6.2 In case of breach of any term of this contract by either party, the other party may terminate this contract by giving a written notice to that effect.Article 7: Miscellanea7.1 This contract constitutes the entire agreement between the Seller and the Buyer and no modification shall be made except in writing and signed by both parties.7.2 This contract is made in duplicate, one for each party, with equal legal effect.7.3 Any disputes arising out of or in connection with this contract shall be settled through friendly negotiation between both parties. If no settlement can be reached, either party may submit the dispute to [Arbitration Institution] for arbitration in accordance with its rules.7.4 This contract is governed by the laws of [Applicable Country].篇3SALES CONTRACTThis Sales Contract (hereinafter referred to as the "Contract") is made and executed on [Date] by and between [Seller's Name] (hereinafter referred to as the "Seller"), and [Buyer's Name] (hereinafter referred to as the "Buyer").Article 1: Identification of the PartiesThe Seller and the Buyer hereby agree to the terms and conditions stated below.Article 2: Product Description2.1 The Product to be sold is described in detail in Annex A, including its specifications, quality standards, and packaging requirements.Article 3: Price and Payment3.1 The price of the Product shall be as stated in Annex B. The Price includes all costs associated with the Product, including taxes, duties, and other applicable charges.3.2 Payment shall be made in full upon receipt of the Product, through the means specified in Annex C.Article 4: Delivery4.1 Delivery shall be made within the timeframe specified in Annex D.4.2 The Seller shall ensure that the Product is properly packaged and labeled for safe transportation to the Buyer.Article 5: Quality Assurance5.1 The Seller shall ensure that the Product meets the specifications and quality standards set out in Annex A.5.2 If the Buyer finds any defects in the Product, the Seller shall promptly replace or repair the Product, at no additional cost to the Buyer.Article 6: Warranty and Liabilities6.1 The Seller provides a warranty for the Product as specified in Annex E.6.2 In case of any claim by the Buyer related to the Product, the Seller shall be liable for any losses incurred by the Buyer, up to the value of the Product.Article 7: Force Majeure7.1 Neither party shall be liable for failure to perform due to force majeure events, such as natural disasters, wars, riots, or government actions, provided that such party promptly notifies the other party of such events.Article 8: Termination8.1 This Contract may be terminated by either party in the event of a breach by the other party of its contractual obligations, provided that such breach is not cured within a reasonable period of time.Article 9: Dispute Resolution9.1 Any disputes arising out of or in connection with this Contract shall be resolved through友好协商(amicable negotiation). If no settlement can be reached, either party may submit the dispute to [arbitration institution or court] for resolution.篇4Sales ContractThis Sales Contract is made on [Date] by and between [Seller's Name], with its principal place of business located at [Seller's Address] (hereinafter referred to as "Seller"), and [Buyer's Name], with its principal place of business located at [Buyer's Address] (hereinafter referred to as "Buyer").1. Scope of Contract(a) The Seller agrees to sell and the Buyer agrees to purchase the under mentioned goods/products, details of which are given in the Annexure A attached hereto and made a part of this Contract.(b) The quantity, quality, specifications, packing, and other relevant terms of the goods/products to be sold shall be clearly stated in Annexure A. The Seller guarantees the accuracy of the same.2. Price and Payment Terms(a) The total contract price for the goods/products mentioned in Annexure A shall be [Contract Price]. The prices are fixed and firm.(b) Payment terms: The Buyer shall make payment through [Payment Method] to the Seller's account within [Payment Timeframe] after the date of this Contract.3. Delivery and Shipping(a) The Seller shall arrange for delivery of thegoods/products to the port specified by the Buyer within [Delivery Timeframe].(b) Shipping documents shall be issued by the Seller and delivered to the Buyer in a timely manner to ensure smooth shipping.4. Quality Assurance and Inspection(a) The Seller guarantees that the goods/products shall be new and of the quality and specifications stipulated in Annexure A.(b) The Buyer has the right to conduct inspections during production and upon receipt of the goods/products to ensure conformity with the contract specifications.5. Risk and Ownership TransferRisk of loss or damage to the goods/products passes to the Buyer upon delivery to the port specified by the Buyer. Ownership of the goods/products shall transfer to the Buyer upon full payment by the Buyer.6. Force MajeureIn case of any delay or failure in performance due to causes beyond the control of either party, such as war, riots, natural disasters, or government intervention, the affected party shall immediately notify the other party in writing. The affected partyshall use reasonable efforts to mitigate the consequences of such force majeure event.7. Warranty and Claims(a) The Seller shall be responsible for any defects in material or workmanship in the goods/products for a period of [Warranty Period] from the date of delivery to the Buyer. During this period, any defects shall be rectified by the Seller at its cost.(b) If any claims are to be made by the Buyer, they must be submitted in writing within [Claim Period] of receipt of the goods/products. Failure to do so shall render claims invalid.8. ConfidentialityBoth parties shall maintain confidentiality of all information related to this contract that is not intended for public disclosure.9. TerminationThis Contract may be terminated by either party in case of a breach by the other party that is not cured within a reasonable period of time. Termination shall be effected by written notice to the other party.10. General Terms(a) This Contract constitutes the entire agreement between the parties and no modifications shall be made unless agreed to by both parties in writing.(b) Any disputes arising out of or in connection with this Contract shall be settled through friendly negotiation between both parties. If no settlement can be reached, either party may submit such disputes to [Dispute Resolution Agency] for arbitration.(c) This Contract shall be governed by and construed in accordance with the laws of [Applicable Law Jurisdiction].(d) This Contract is made in [Number of Languages] originals, each being equally authentic.(e) This Contract becomes effective as of the date stated at the beginning of this Contract and shall continue in full force and effect for a period of [Contract Duration].The parties have signed this Contract in [Signature Place] on the date stated at the beginning of this Contract.Seller:Name:Title:Date:Signature:Buyer:Name:Title:Date:Signature:ANNEXURE A - PRODUCTS AND SPECIFICATIONS [Please insert detailed list of products, specifications, quantity, quality, etc.] [This space left intentionally blank.] [Insert additional annexes if necessary.] [Insert company logos or other identifying marks if desired.]篇5Sales ContractThis Sales Contract is made on [Date] by and between [Seller's Full Name] (hereinafter referred to as "Seller"), and [Buyer's Full Name] (hereinafter referred to as "Buyer").Article 1: Description of GoodsThe Seller agrees to sell and the Buyer agrees to purchase the following goods: [Description of goods, including product name, quantity, specifications, and any other relevant details].Article 2: Price and PaymentThe total price for the goods shall be [Total Price in figures and currency]. Payment shall be made through [Payment method/s (e.g., wire transfer, credit card, etc.)]. The Buyer shall make the payment within [Time frame for payment (e.g., 30 days from date of signing this contract)].Article 3: DeliveryThe Seller shall deliver the goods to the Buyer at the following address: [Buyer's shipping address]. The delivery shall be completed within [Time frame for delivery].Article 4: Quality and InspectionThe Seller guarantees that the goods shall be of good quality and shall comply with the specifications mentioned in Article 1.The Buyer shall have the right to inspect the goods upon receipt. If any defects are found, the Buyer shall notify the Seller immediately.Article 5: Warranty and售后支持The Seller shall provide a warranty for the goods as follows: [Details of warranty period, terms and conditions]. The Seller shall also provide necessary after-sales support to the Buyer as needed.Article 6: Risks and LiabilityRisk of loss or damage to the goods shall pass to the Buyer upon delivery. The Seller shall be liable for any damage to the goods caused during transportation. However, if the damage is caused due to force majeure events (e.g., natural disasters), then the Seller shall not be liable.Article 7: TerminationThis Contract may be terminated by either party in case of breach of any term or condition by the other party. The party seeking termination shall provide a written notice to the other party specifying the reasons for termination.Article 8: Disputes and GrievancesAny disputes arising out of or in connection with this Contract shall be settled through friendly negotiations between the parties. If no settlement is reached, the dispute shall be referred to [Mediation/Arbitration institution or court of law].Article 9: Force MajeureNeither party shall be liable for failure to perform its obligations under this Contract due to force majeure events (e.g., natural disasters, wars, riots, etc.). The affected party shall provide timely notice to the other party regarding such events.Article 10: General TermsThis Contract constitutes the entire agreement between the parties and no modifications shall be made except by written agreement signed by both parties. This Contract is governed by the laws of [Country/State]. The original Contract in English shall be equally valid as any translated version. Any notices required under this Contract shall be in writing and sent to the addresses specified by the parties.In witness whereof, the parties have signed this Contract in duplicate, each party retaining one copy.Seller: _________________________ (Signature)Date: _________________________ (Date)Buyer: _________________________ (Signature)Date: _________________________ (Date)(Note: This is a template and should be customized according to specific requirements and circumstances.)篇6Sales ContractThis Sales Contract (hereinafter referred to as the "Contract") is made and entered into by and between [Buyer Name], whose registered office is located at [Buyer Address] (hereinafter referred to as the "Buyer"), and [Seller Name], whose registered office is located at [Seller Address] (hereinafter referred to as the "Seller").Preamble:After friendly negotiation and mutual understanding of the terms and conditions, the Buyer agrees to purchase from the Seller, and the Seller agrees to sell to the Buyer, the products specified in this Contract.Article 1: Scope of SupplyThe Seller agrees to sell and the Buyer agrees to purchase the under-mentioned commodity:[Product Description, Quantity, Quality, Specifications, Packaging, etc.]Article 2: Price and Payment2.1 The total contract price for the goods mentioned in Article 1 shall be [Price Amount].2.2 Payment shall be made by [Payment Method] through [Bank Name] within [Days/Weeks/Months] after the date of this Contract.Article 3: Delivery and Shipment3.1 The Seller shall deliver the goods within [Delivery Period] after receiving the order confirmation from the Buyer.3.2 The Seller shall inform the Buyer of the estimated date of shipment in good time before the shipment. The Seller shall ensure that the goods are shipped within the time as stipulated in this Contract. In case of force majeure, the Seller shall immediately notify the Buyer in writing of any delay in delivery.Article 4: Quality Inspection and Warranty4.1 The Seller shall ensure that all goods are of the quality, specifications and quantity agreed in this Contract. Any discrepancies must be promptly reported to the Buyer in writing.4.2 The Seller guarantees that the goods are free from any defects in material and workmanship for a period of [Warranty Period] from the date of arrival at the port of destination specified in this Contract. During this period, the Seller shall make up any defects in quality or quantity free of charge.Article 5: Risk and Insurance5.1 Risk of loss or damage to the goods passes to the Buyer upon delivery on board the vessel at the port of shipment specified in this Contract. Prior to that point, all risks shall be borne by the Seller.此外，合同还考虑了可能出现的法律争议问题，并为此制定了相应的解决方案。

英文版销售合同样本5篇

英文版销售合同样本5篇篇1Sales ContractThis Sales Contract is made and entered into on this____(date)_______ by and between:Seller: ____(name)_______, with a business address of____(address)_______, hereinafter referred to as "Seller”.Buyer: ____(name)_______, with a business address of____(address)_______, hereinafter referred to as "Buyer”.1. Product Description: The Seller agrees to sell to the Buyer, and the Buyer agrees to purchase from the Seller, the following products: ____(description of products)_______.2. Quantity: The Buyer agrees to purchase____(quantity)_______ units of the above-mentioned products.3. Price: The price of the products shall be ____(price)_______ per unit. The total purchase price shall be ____(total price)_______. Payment shall be made in ____(currency)_______. The payment shall be made as follows: ____(payment terms)_______.4. Delivery: The Seller shall deliver the products to the Buyer at the address specified by the Buyer on ____(deliverydate)_______.5. Inspection and Acceptance: The Buyer shall have____(number of days)_______ days from the date of delivery to inspect the products and notify the Seller of any defects or nonconformities. If the Buyer fails to notify the Seller within the specified time frame, the products shall be deemed accepted.6. Warranty: The Seller warrants that the products are free from defects in material and workmanship. If any defects are found within ____(warranty period)_______ days from the date of delivery, the Seller shall replace the defective products at no additional cost to the Buyer.7. Governing Law: This Sales Contract shall be governed by and construed in accordance with the laws of the state of____(state)_____.8. Entire Agreement: This Sales Contract constitutes the entire agreement between the Seller and the Buyer with respect to the purchase and sale of the products and supersedes all prior agreements and understandings, whether written or oral.IN WITNESS WHEREOF, the Seller and the Buyer have executed this Sales Contract as of the date first above written.Seller: __________________ Buyer:___________________________________________________________(Date)(Date)篇2Sales ContractThis Sales Contract (“Contract”) is entered into on [Date] (“Effective Date”) by and between [Seller Name], with an address at [Seller Address] (“Seller”) and [Buyer Name], with an address at [Buyer Address] (“Buyer”).1. Sale of Goods: Seller agrees to sell and Buyer agrees to purchase the following goods: [Description of Goods], in the quantity of [Quantity] at the price of [Price] per unit.2. Payment Terms: The total purchase price for the goods shall be paid as follows: [Payment Terms]. Buyer shall makepayment in the currency of [Currency] to the bank account of Seller no later than [Due Date].3. Delivery: The goods shall be delivered to Buyer’s address at [Delivery Address] by [Delivery Method] no later than [Delivery Date]. The risk of loss or damage to the goods shall pass to Buyer upon delivery.4. Inspection: Buyer shall have the right to inspect the goods within [Inspection Period] days from the delivery date. If Buyer finds the goods to be non-conforming or defective, Buyer shall notify Seller in writing within the Inspection Period.5. Warranties: Seller warrants that the goods shall be free from defects in material and workmanship and shall conform to the specifications agreed upon by the parties. The warranty period shall be [Warranty Period] from the delivery date.6. Limitation of Liability: In no event shall Seller be liable for any indirect, incidental, special, or consequential damages arising out of or related to this Contract. Seller’s total liability shall not exceed the total purchase price paid by Buyer under this Contract.7. Governing Law: This Contract shall be governed by and construed in accordance with the laws of the State of [State], without regard to its conflict of law principles.8. Entire Agreement: This Contract constitutes the entire agreement between the parties concerning the sale of goods and supersedes all previous agreements and understandings, whether written or oral.IN WITNESS WHEREOF, the parties hereto have executed this Contract as of the Effective Date.Seller: ____________________________ Buyer:____________________________篇3Sales ContractThis Sales Contract ("Contract") is entered into by and between [Seller's Name], with a principal place of business at [Seller's Address] ("Seller"), and [Buyer's Name], with a principal place of business at [Buyer's Address] ("Buyer"), collectively referred to as the "Parties," on this [Date].1. Sale of Goods: Seller agrees to sell and deliver to Buyer, and Buyer agrees to purchase and accept delivery of the goodsdescribed in Exhibit A (the "Goods") in accordance with the terms and conditions of this Contract.2. Purchase Price: The Purchase Price for the Goods shall be [Amount] per [Unit], for a total purchase price of [Total Amount]. Buyer shall make payment of the Purchase Price in the manner set forth in Exhibit B.3. Delivery: Seller shall deliver the Goods to Buyer at [Delivery Location] on or before the Delivery Date set forth in Exhibit A. Buyer shall be responsible for all costs associated with the delivery of the Goods.4. Inspection and Acceptance: Buyer shall have [Number] days from the Delivery Date to inspect the Goods and notify Seller in writing of any defects or non-conformities. Buyer shall be deemed to have accepted the Goods unless Seller receives written notice of rejection within the specified period.5. Warranties: Seller warrants that the Goods conform to the specifications set forth in Exhibit A and are free from defects in material and workmanship.6. Limitation of Liability: In no event shall either Party be liable for any consequential, incidental, special, or indirectdamages, including without limitation, loss of profits, loss of business or loss of goodwill.7. Miscellaneous:7.1 This Contract contains the entire agreement between the Parties and supersedes any prior agreements or understandings, whether written or oral.7.2 This Contract shall be governed by the laws of [Jurisdiction], and any disputes arising under this Contract shall be resolved through arbitration in [Arbitration Venue].IN WITNESS WHEREOF, the Parties have executed this Contract as of the date first written above.Seller:____________________________[Signature][Printed Name][Title]Buyer:____________________________[Signature][Printed Name][Title]篇4Sales ContractThis Sales Contract (the "Contract") is made and entered into as of [Date] (the "Effective Date") by and between [Seller], with a registered address at [Address] (the "Seller"), and [Buyer], with a registered address at [Address] (the "Buyer").1. Description of GoodsThe Seller agrees to sell to the Buyer, and the Buyer agrees to purchase from the Seller, the following goods (the "Goods"):- Description of goods- Quantity- Price2. PriceThe total price for the Goods shall be [Total Price], which shall be paid by the Buyer to the Seller in [Currency] upon execution of this Contract.3. DeliveryThe Seller shall deliver the Goods to the Buyer at [Delivery Location] on or before [Delivery Date]. The Buyer shall bear all costs associated with the delivery of the Goods.4. Inspection and AcceptanceThe Buyer shall have [Number] days from the date of delivery to inspect the Goods and notify the Seller of any defects or nonconformities. If no notice is given within the specified time period, the Goods shall be deemed accepted by the Buyer.5. WarrantiesThe Seller warrants that the Goods shall be free from defects in materials and workmanship for a period of [Number] days from the date of delivery. The Seller's sole liability under this warranty shall be to repair or replace any defective Goods.6. Limitation of LiabilityIn no event shall either party be liable for any indirect, consequential, incidental or special damages arising out of or inconnection with this Contract, even if such party has been advised of the possibility of such damages.7. Governing LawThis Contract shall be governed by and construed in accordance with the laws of [State/Country].8. Entire AgreementThis Contract constitutes the entire agreement between the parties with respect to the sale of the Goods and supersedes all prior agreements and understandings, whether written or oral.IN WITNESS WHEREOF, the parties hereto have executed this Contract as of the Effective Date.Seller:[Signature][Name][Title][Date]Buyer:[Signature][Name][Title][Date]篇5Sales ContractThis Sales Contract (the "Contract") is made and entered into this ___ day of ____, 20___, by and between [Seller], with a business address at [Seller's address] (the "Seller"), and [Buyer], with a business address at [Buyer's address] (the "Buyer").RECITALS1. The Seller is in the business of selling [description of goods or services].2. The Buyer wishes to purchase [description of goods or services] from the Seller.3. The Seller and the Buyer desire to set forth the terms and conditions of the sale of the goods or services as detailed below.AGREEMENT1. Sale of Goods/Services. The Seller agrees to sell and the Buyer agrees to purchase [description of goods or services] according to the terms and conditions set forth in this Contract.2. Price. The purchase price for the goods or services shall be ___ US Dollars ($__) per unit, for a total purchase price of ___ US Dollars ($__). Payment shall be made in the following manner: [payment terms, such as upfront payment, installment payments, etc.].3. Delivery. The Seller shall deliver the goods or perform the services to the Buyer at [delivery location] on or before [delivery date]. The Buyer shall be responsible for any shipping or delivery fees incurred.4. Inspection Period. The Buyer shall have a period of ___ days after delivery to inspect the goods or services and to notify the Seller of any defects or nonconformities. If the Buyer fails to notify the Seller within said period, the goods or services shall be deemed accepted by the Buyer.5. Warranties. The Seller warrants that the goods shall be free from defects in materials and workmanship for a period of ___ months from the date of delivery. The Seller also warrants that the services shall be performed in a professional and workmanlike manner.6. Indemnification. The Seller agrees to indemnify and hold harmless the Buyer from any claims, damages, or liabilities arising from any defects or nonconformities in the goods or services.7. Governing Law. This Contract shall be governed by the laws of the State of [State], without regard to its conflict of law principles.IN WITNESS WHEREOF, the parties hereto have executed this Contract as of the date first above written.Seller: _____________________ Buyer:_____________________[Name and Title][Name and Title][Company Name][Company Name][Date][Date]。

1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。

英文购销合同范本
买方The Buyer:地址Address Tel: Fax: 卖方 The Seller: 地址： Address Tel: Fax: 本合同由买卖双方订立，根据本合同规定的条款，买方同意购买，卖方同意出售下述商品：This Contract is made by and between the Buyers and Sellers, whereby the Buyers agree to buy and the Sellers agree to sell the under-mentioned commodity according to the terms and conditions stipulated below:(1) 货名及规格Commodity & Specification (2) 数量 Qty. (3) 单价 Unit Price (4) 总价Total Amount (5) 原产公司：COUNTRY OF ORIGIN :(6) 装运期限：TIME OF SHIPMENT: (7) 装运口岸：PORT OF SHIPMENT：(8) 到货目的地：DESTINATION：(9) 保险： INSURANCE：由卖方按合同金额110%投保一切险和战争险All Risks and War Risk for 110% contract value to be covered by the Seller. (10) 运输方式：TERM OF SHIPMENT: 空运By air (11) 包装：PACKING：须用坚固的新木箱包装，适合长途空运/陆运，防湿、防潮、防震、防锈、耐粗暴搬运。

由于包装不良所发生的损失，由于采用不充分或不妥善的防护措施而造成的任何锈损、破损，卖方应负担由此而产生的一切费用和损失。

包装箱内应包含一整套服务操作
手册。

卖方使用的木质包装应经薰蒸处理，并在木质包装表面标上清晰的IPPC标识。

To be packed in new strong wooden case(s) suitable for long distance air/land transportation and well protected from dampness, moisture, shock, rust and rough handling. The Sellers shall be liable for any damage to the goods on account of improper packing and for any rust damage and break damage attributable to inadequate or improper protective measures taken by the Sellers, and in such case or cases any and all losses and / or expenses incurred in consequence thereof shall be borne by the Sellers. One full set of service and operation manuals concerned shall be enclosed in the case(s). The wood packaging the Seller used shall be fumigated and marked with “IPPC” on the surface of wood packaging. (12) 唛头：SHIPPING MARK: 卖方应在每件包装上，用不褪色油墨清楚地标刷件号、尺码、毛重、净重、“此端向上”、“小心轻放”、“切勿受潮”等字样，并刷有下列唛头: On the surface of each package, the package number, measurements, gross weight, net weight, the lifting positions, such cautions as “THIS SIDE UP”, “HANDLE WITH CARE”,“KEEP AWAY FROM MOISTURE” and the following
shipping mark: (13) 付款条件：TERMS OF PAYMENT：100%的合。