生产流程图(英文版)
石化产品流程图(英文版)
Gardening implements Home furnishings, sports equipment Building & construction Coatings, inks, adhesives for professional use, chemical processing Sports equipment
aromatics
Xylenes
steam cracking
steam cracking
steam cracking
catalytic reforming
steam cracking
Ethane
LPG Associated gases
Methane
Naphtha
refining
NGL Naphtha
refining processing
Solvents
Solvents
Plastics Polycarbonate plastics Bisphenol A PMMA MMA
Polyester resins PolySolvents urethanes Solvents Solvents SBR synthetic Propylene Dipropyglycol lene glycol ether ether acetates acetates Propylene Dipropyglycol lene glycol ethers ethers (Mono)propylene glycol Polyacrylate Polypropylene Phenol Acetone Polyols Plasticisers Isobutyl acetate Nbutyl acetate Nbutanol Acrylic esters Acrylic acid Isophorone Acetone Isopropyl acetate Cumene Propylene oxide Butyraldehyde Isopropanol Butadiene Isobutylene N-butenes Formaldehyde PMMA MMA NBR synthetic Butyl rubbers MTBE (Fuel oxygenate) Higher olefins MTBE (Fuel oxygenate) Phenolic resins Polyurethanes Styrenic plastics Synthetic rubbers
工艺流程图模板(中英文)
原材料检验 Testing of raw materials
退回供应商 ct
10-02
2.化学成分Chemical element:C≤0.15、Si ≤0.05、Mn≤0.60、S≤0.035、P≤0.035
3.力学性能Mechanical properties：抗拉 强度Tensile strength ≥305Mpa、屈服强 度Yield strength≥175Mpa、断后伸长率 Elongation≥29
序号NO.
作业 Fab
移动 贮存 检查 Move Store Inspect
报废、隔离
返工
Scrap
Rework Separate
过程描述 Operation Description
项目 Item
图纸版本号DWG.REV.: 3
文件编号File
No.： ：
HD/JS-COP2-BD007
关键产品特性 Significant Product Characteristic
山东慧达汽车部件有限公司 Shandong HuiDa Automotive Parts Co., Ltd.
工艺流程图 Process Flow Diagram
客 户Customer ：
零件编号Part Number： 零件名称Part Description：
E32628-1、E32628-3 端盖 HP HUB CAP,GREASE NON-VENTED
切边冲孔 Trimming and Punching
60-01
2.HD146-H012/切边冲孔模Trimming and Punching die
《检验记录》 《Inspection record》
固体聚合氯化铝生产工艺流程图
固体聚合氯化铝生产工艺流程图英文回答：The production process flowchart of solid polyaluminum chloride (PAC) can be divided into several stages. Here is a brief description of each stage:1. Raw Material Preparation:The raw materials used in the production of solid PAC include aluminum hydroxide and hydrochloric acid. Aluminum hydroxide is first crushed and ground into fine powder. Hydrochloric acid is also prepared in the required concentration.原料准备：固体聚合氯化铝的生产原料包括氢氧化铝和盐酸。
首先将氢氧化铝粉碎研磨成细粉。
盐酸也按照所需浓度进行准备。
2. Reaction:In this stage, the aluminum hydroxide powder is mixed with the hydrochloric acid solution in a reaction tank. The reaction takes place, resulting in the formation of polyaluminum chloride. The reaction conditions, such as temperature and agitation, are carefully controlled to ensure the desired product quality.反应：在这个阶段，将氢氧化铝粉末与盐酸溶液在反应罐中混合。
啤酒工艺学流程图英文版
啤酒工艺学流程图英文版英文回答：Brewing Process Flowchart.1. Malting.Barley is soaked in water for several days.The barley is spread out on a floor and allowed to germinate.After a few days, the germination process is stopped by heating the barley in a kiln.2. Milling.The malted barley is ground into a coarse flour called grist.3. Mashing.The grist is mixed with hot water in a mash tun.Enzymes in the grist convert the starches in the barley into sugars.4. Lautering.The mash is transferred to a lauter tun, where the liquid (wort) is separated from the solids (spent grains).5. Boiling.The wort is boiled in a brew kettle.Hops are added to the wort to provide flavor and bitterness.6. Cooling.The wort is cooled to a temperature that is suitablefor fermentation.7. Fermentation.Yeast is added to the wort.The yeast converts the sugars in the wort into alcohol and carbon dioxide.8. Conditioning.The beer is allowed to age in a fermentation tank for several weeks.This allows the flavors to develop and the beer to carbonate.9. Filtration.The beer is filtered to remove any remaining yeast or solids.10. Packaging.The beer is packaged in bottles, cans, or kegs.中文回答：啤酒工艺学流程图。
冲压工艺流程图+PFMEA+CP范例(中英文)
20-03 尺寸Size：230×1250mm
20-04
《返工指导书》 《Rework Instructions》
20-05
20-06
20-07
《检验记录》 《Inspection record》
《检验记录》 《Inspection record》 《检验记录》 《Inspection record》
检验 Inspection 返工 Rework 隔离 Separate 移至领料区 Move to picking area
存放 Storage
20-02
1.QC12Y-12*2500/液压剪板机 QC12Y-12*2500/Hydraulic shears
2.《下料工艺卡片》 《Cutting process card 》
零件名称Part Description： 端盖 HP HUB CAP,GREASE NON-VENTED
序号NO.
作业 Fab
移动 贮存 检查 Move Store Inspect
报废、隔离
返工
Scrap
Rework Separate
过程描述 Operation Description
项目 Item
2.化学成分Chemical element:C≤0.15、Si 10-02 ≤0.05、Mn≤0.60、S≤0.035、P≤0.035
3.力学性能Mechanical properties：抗拉 强度Tensile strength ≥305Mpa、屈服强 度Yield strength≥175Mpa、断后伸长率 Elongation≥29
报废、隔离
返工
Scrap
Rework Separate
全生产流程 英语
全生产流程英语English:The entire production process involves multiple stages starting from raw material sourcing to the final product delivery. Firstly, raw materials are procured from suppliers according to specifications and quality standards. Then, these raw materials undergo processing which may include sorting, cutting, shaping, or chemical treatments depending on the product requirements. Next, the processed materials are assembled or manufactured into components or parts through various techniques such as molding, casting, machining, or welding. Quality control measures are implemented at each stage to ensure consistency and adherence to specifications. After the components are ready, they are assembled into the final product through assembly lines or manual assembly processes. This step involves precise coordination to ensure all parts are correctly integrated. Subsequently, the finished products undergo inspection and testing to verify functionality, safety, and compliance with regulations. Finally, the products are packaged and prepared for shipment to customers, with appropriate labeling and documentation. Throughout the entire process, effectivecommunication, collaboration, and coordination among different departments and personnel are essential to maintain efficiency and quality.中文翻译:整个生产流程涉及多个阶段，从原材料采购到最终产品交付。
IATF16949APQP Prototype Release to Production Drawing Release流程图(英文版)
Select vendor and release for prototype assy and fabrication
Order tools and parts for prototype
Build Prototypes
RFQ, Quote, Purchase Order, Drawing released for prototype, Parts
Drawings, customer specific requirements
DCC Drawings TS18c
Special Characteristics, Drawing
Quality Engineer, Program Manager
Drawings, Customer requirements
Design Engineer, Program Manager
DVP&R, Customer, Manufacturing feasibility, Standard Drawings, GB15086
Update Design as req'd
Design, GD&T Drawing Review
Milestone Review
Math Data, Drawings, GD&T, Milestone review checklist (MTC)
Quality Engineer, Program Manager, tooling Engineering, Process Engineer.
Prepare Prototype Control Plan
Prototype parts Dimensional reports and material certificates
生产计划控制程序(中英文)
生产计划控制程序Production planning and controlling procedure1.0 P urpose目的For the preparation of standard production planning, tracking, implementations, closing, establish the procedure为规范生产计划的编制,跟踪,执行,结案,特制定本程序2.0 S cope 范围Applicable to all products of the factory production plan适用于本厂的所有产品的生产计划的安排3.0 D efinition 定义Definition of production schedule: In order to meet the demand of customer orders, exact prepare for materials, personnel, equipment ", execute distribution and use of the program生产计划的定义: 为满足客户订单需求,执行对材料、人员、工装夹具”的确切准备、分配及使用的计划4.0Reference Standard 参考标准N/A5.0 R esponsibilities 职责5.1 PMC dept. is responsible for arrange and monitor operation of the production schedule计划部负责安排和监督生产计划的运作5.2 Prod dept. is responsible for execute and finish the productionschedule生产部负责执行和完成生产计划的运作5.3ME dept. is responsible for provide related support of execute the production schedule工程部负责提供执行生产计划运作的相关支持5.4Pur dept. is responsible for provide related material of execute the production schedule采购部负责提供执行生产计划运作的相关物料5.5WH dept. is responsible for distribute related material of execute the production schedule货仓部负责配发执行生产计划运作的相关物料6.0Procedure Flow流程图。