美国阿尔法ALPHA 皮毛一体B3飞行皮衣皮夹克

合集下载

Furuno Finland 冰雪雷达 FICE-100 和油漫雷达 FOIL-200 产品说明书

INSTALLATION MANUALFURUNO FINLANDICE RADAR FICE-100FURUNO FINLANDOIL RADAR FOIL-200 Furuno Finland OyContents1. SPECIFICATIONS (4)2. CABLING AND CONNECTORS (5)2.1 Connectors on EC-3000 processor (5)2.2 Sensor Data Input (6)2.2.1. Introduction (6)2.2.2 Serial Interface sensor information (6)2.2.3 LAN Interface for sensor information (7)2.3 Connectors on ScanStreamer (8)2.3.1 Introduction (8)2.3.2 ScanStreamer DNP2012001 (8)2.3.2 ScanStreamer DNP2016009 (10)2.4 Connector on RPU-013 of FAR-2xx7 (11)2.4 Connector on RPU-024 of FAR-15x8 (11)2.5 Connectors on up-mast unit of FAR-2xx8/FAR-3000 (12)3. CONFIGURATION OF DISPLAY RESOLUTION (13)4. CONFIGURATION OF PARAMETERS (15)4.1 Vessel dimensions and antenna offsets (15)5 ADJUSTMENT OF VIDEO LEVEL (16)5.1 Video level and ADC Gain (16)5.2 How to activate radar video adjustment mode (17)5.3 How to adjust video level offset (18)5.4 How to adjust ADC gain (19)5.5How to adjust Trigger delay (20)5.6 How to quit radar video adjustment mode (20)6. PERFORMANCE TEST FOR NAVIGATION RADAR (21)6.1 FAR-2xx7 (21)6.2 FAR-3000 (21)7. TROUBLESHOOTING (22)7.1. No data from serial data sensors (22)8. INTERCONNECTION DIAGRAM (23)Version E, 07 JUN 20191. SPECIFICATIONS Interconnection diagram:2. CABLING AND CONNECTORS2.1 Connectors on EC-3000 processorBelow you can find connectors on EC-3000 processor back panel.2.2 Sensor Data Input2.2.1. IntroductionSensor data can be input either using:∙Serial connector inside EC-3000 (IEC61162-1/2)∙LAN interface from HUB-100 of ECDIS network (IEC61162-450)Note that target information TT and AIS targets have to be received both either serial interface or LAN interface. Only one interface can be used.2.2.2 Serial Interface sensor informationFollowing sentences can be received by FICE-100/FOIL-200:HDT, THS, GLL, GGA, VTG, ZDA, VBW, VHW, TTM, VDM, MTWBelow you can find connectors for serial line sensor data inside EC-3000 processor. Connector J3 can be used for Gyro signal input (38400 bps). Connectors J5-J6 and J8-J10 can be used for Gyro, EPFS, log and weather data signals (4800 bps). System automatically detects input signals, i.e. there is no need to configure these ports.Note, that connectors:∙J4 is for VDM, AIS target data (38400 bps)∙J7 is for TTM, Navigation radar tracket targets (4800 bps)Gyro 4800 bpsGyro 38400 bpsLog 4800 bpsAIS 38400 bpsWeather 4800 bpsEPFS 4800 bpsTT 4800 bps Connectors J3 and J4 are for IEC61162-2Connectors J5-J10 are for IEC61162-12.2.3 LAN Interface for sensor informationConfiguration of sensor receiving from MC-3000/HUB-100 can be done in “sensor.conf” file. You need to configure LAN1 into the same network as MC-3000/HUB-100.- Open console Press ALT + X keys.- Type nano sensors.conf [enter]- Check that source is as “source=lwe”- Check that own IP address is in the same network space as MC-3000 (for example if MC-3000 IP address is192.168.1.1) then own IP can be (192.168.1.119).- Save and close editor.2.3 Connectors on ScanStreamer2.3.1 IntroductionThere are two versions of Scanstreamer available:∙ScanStreamer DNP2012001∙ScanStreamer DNP2016009∙Check which one you have in your system.A ScanStreamer receives raw radar video from Furuno navigation radar, FAR-2xx7, FAR-2xx8, FAR-15x8 or FAR-3000. Following information is received from Furuno navigation radar. It digitizes analogue video and send it to EC-3000 through LAN:∙Raw radar video∙Trigger∙Bearing pulse∙Head line2.3.2 ScanStreamer DNP2012001Below is shown connectors on DNP2012001:Oil radar/Ice radar (EC-3000) processor receives digitized radar video through LAN connection.Connector J42.3.2 ScanStreamer DNP2016009Below is shown connectors on DNP2016009:Oil radar/Ice radar (EC-3000) processor receives digitized radar video through LAN connection.Connector J32.4 Connector on RPU-013 of FAR-2xx7 Connect cable to SLAVE 1 connector (J617)2.4 Connector on RPU-024 of FAR-15x8 Connect cable to SLAVE 1 connector (J611) Connect FICE-110 cable to SLAVE 1 connector Connect FICE-110 cable to SLAVE 1 connector2.5 Connectors on up-mast unit of FAR-2xx8/FAR-3000Connect FICE-110 cable to TB 803 (trigger, bearing pulse and head line) and to TB804 (radar video) as shown below.Radar video cableconnected to TB804 connector (TOSLAVE DISPLAY)WAGO connectorconnected to TB803 connector3. CONFIGURATION OF DISPLAY RESOLUTIONWhen booting up the system it is automatically detecting display connected to system. For some cases system fails to detect correctly connected display and you need to manually enter display resolution and dimensions of monitor.To configure manually display resolution, precede as follows:1. During boot up the system you following display will be shown.Select Display configuration.2. Select correct resolution for display3. Enter width in millimeters4. Enter height in millimeters5. Check that you have correct values and confirm by selecting Yes.4. CONFIGURATION OF PARAMETERS4.1 Vessel dimensions and antenna offsetsSensor and conning positions on ship are in “vessel.config” file, which must be edited at installation time.5 ADJUSTMENT OF VIDEO LEVEL5.1 Video level and ADC GainWhen installation of FICE-100/FOIL-200 is done, you have to check that video level is correctly set. FICE-100/FOIL-200 radar uses raw radar video from navigation radar to make ICE/Oil radar image on FICE-100/FOIL-200 screen. Each navigation radar has a bit different video level in output for FICE-100/FOIL-200. To adopt for different video level you can adjust video level offset and ADC gain (signal amplifier).Below is typical video signal received from FAR-2xx7 or FAR-3000.Below is example of incorrect video level offset:Photos above: Video level is much too high. Near area is not readable at all. You can see it alsoin scope display.Sweep 0-11 000 m:This graph is to indicate how video is shown up to 11 000 meters.Photos above: Video level offset is adjusted. You can see in scope display that video is readable during antenna sweep in whole range.5.2 How to activate radar video adjustment modeYou can activate FICE-100/FOIL-200 video adjustment mode:5.3 How to adjust video level offsetAdjustment range of Video Offset:ScanStreamer DNP2012003: -1.00 - 1.00ScanStreamer DNP2016001: 0 - 255To adjust video level offset: Before video level adjustment:After adjustment:5.4 How to adjust ADC gainAdjustment range of ADC Gain:ScanStreamer DNP2012003: 0 - 6ScanStreamer DNP2016001: 0 - 255Before gain adjustment:To adjust video level: After adjustment:5.5How to adjust Trigger delayYou may need to adjust trigger delay on FICE-100/FOIL-200. This is very much depending on cable length between navigation radar and ScanStreamer. Measure distance of echo on Navigation radar. Measure the same echo on FICE-100/FOIL-200, if there is difference in distance you can use Trigger delay to adjust echoes on FICE-100/FOIL-200 display.5.6 How to quit radar video adjustment modeTo quit radar video adjustmentmode:6. PERFORMANCE TEST FOR NAVIGATION RADAR6.1 FAR-2xx7FAR-2xx7 is used as normal navigation radar. To verify performance of radar, see installation manual of FAR-2xx7. Following should be proceeded:• “Tune initialize”• Check TX time of magnetron• Use “Performance monitor” to check gain. Performance monitor is an option. If not available, check TX time of magnetron. Replace magnetron if TX time is more than 5000 hours.6.2 FAR-3000Automatic tuning is initialized during the installation. However, if you feel that automatic tuning is not working properly try re-initializing the tuning. Right-click the [TUNE] button then select [Tune Initialize] to start the initialization. The indication [Tune INI] appears during initialization.7. TROUBLESHOOTING7.1. No data from serial data sensorsIf heading or position is missing, you can do following things:1. Check that data is sent by the sensor(s).2. Check that cabling is correctly done and connectors properly fixed.To check configuration of COM –ports:A) Sensor traffic- Click Alt+x together to open console- Type: cat /dev/ttyXR2 (ttyXR2 = J3, ttyXR3 = J4, ttyXR4 = J5, …, ttyX R9 = J10) You should now see sensor traffic on screen. Press Ctrl-C to stop it.8. INTERCONNECTION DIAGRAM。

貂皮大衣基本知识

貂皮大衣_貂皮大衣分类、好坏你对貂皮大衣了解有多少？貂皮大衣是怎么分类的？怎样鉴别貂皮大衣的好坏？
貂皮大衣分类
貂皮大衣按貂皮部位分为全貂皮、貂皮串龙、貂皮脊、貂嗉、貂肷和貂尾大衣。

貂皮脊和貂皮嗉是貂皮的主要部位，其绒毛致密，针毛油亮，皮板柔韧有拉力。

在貂皮各部位中，貂皮脊毛质量最好，嗉居第二位，其毛被保暖御寒性好，光亮，色彩富丽堂皇。

貂脊和貂嗉大衣是极珍贵的产品。

选购时要求毛被针毛齐全，油亮，绒毛致密，灵活，松散，皮板柔软，丰满、柔韧有拉力，毛质相遂，线缝浅，密，均匀，无漏缝拴毛等现象。

貂皮大衣好坏
貂皮峰毛清晰油亮，绒毛柔软灵活，手感很滑，毛被针毛齐全，绒毛致密，松散，皮板柔软，丰满、柔韧有拉力，毛质相遂，线缝浅，密，均匀，无漏缝拴毛。

皮草款式设计新颖的貂皮大衣才是好的貂皮大衣
搜集整理：营东国际皮草城。

FAB

阿曼施时尚羽绒服产品FA B系列：时尚妩媚女人味系列轻松运动休闲风格简约大气的欧范系列时尚女人味系列：优雅、时尚复古、摩登、曲线简约大气系列：欧范、缤纷、柔软、田园、经典轻松运动休闲系列：运动、时尚、青春、休闲、阳光Y—110 ￥1299元本款属时尚女人味系列。

时尚，精致，典雅，充满女性魅力的设计，加之精致的收腰设计，既保暖时尚又不失女人曲线美。

本款采用菱形格子设计将羽绒服的臃肿感觉彻底分散，属哥特风的延续款。

精致的铆钉腰带设计，更让本款在女人味中增添时尚摇滚感觉，与国际流行更近距离的接轨。

领部和帽部均采用狐狸毛设计，给人一种奢华贵气之感。

拉链扣设计为圆球镶水钻设计，在本属摇滚香奈儿主题的时尚气息中，更显女性美与精致感。

中长款的设计，加之采用流行的德国特富龙面料，色泽柔和，与阿曼施品牌定位更加融合。

本款亦是时尚，简约，个性的典型代表款！Y—128 ￥499元本款属于时尚甜美小韩版，属时尚欧范系列、精致的印花图案（属印花面料）充满洛可可风范，显女性甜美气息。

领部精致的獭兔毛别致设计，突显女性脖颈的修长而不显衣服领部的臃肿。

精致的收腰设计，突显女性腰部的纤细。

本款共计四个颜色，下身可搭配短裤，短裙或者哈伦牛仔裤亦可。

整体给人一种时尚，甜美又不事女人味的感觉！属时尚女人味系列！另注：本款另有长款同系列~！Y—011 ￥899 元本款属运动休闲系列，面料为平纹记忆纺面料，本款可里外两穿，里面为80%腈纶+20%涤纶，属人造毛。

毛色泽柔和，可与真毛相媲美。

毛纺属豹纹图案，反面穿着给人一种时尚，贵气，野性美。

正面穿着属于典型小短款，给人时尚，休闲感觉，收腰效果亦佳，不显臃肿形态。

本款毛领属貉子毛，表密，可直接洗涤，宜打理。

与衣服整体搭配相融合，更突显时尚气息。

本款可搭配小脚裤+雪地靴或短裤亦佳！Y—157 ￥899元本款采用日本进口水洗皮，外观及手感与真皮十分相似，虽没有真皮的透气性好，但比真皮轻便，本款属于简约大气系列，款式为中长款，下摆和袖口均可自由收缩，领部采用草兔毛，可水洗，而且打理起来比较方便，且草兔毛比较细腻柔软，对皮肤比较好。

如何鉴别ALPHA阿尔法服装

为什么要缝制一个笔套在MA-1飞行夹克上？
....用于防止笔插进笔袋时，墨水或油墨流出，弄脏衣袖。
为什么要把CWU-45/P飞行夹克的口袋做成斜口？
....当为军官设计飞行服时，口袋的目的是给军官一个功能性的用途，不想让飞行员也手插口袋闲逛。因此，飞行员的飞行夹克口袋做成斜口且开的很高。
ALPHA为美国空军生产现役的联体飞行服和求生装具背心吗？
....现在ALPHA还没有为美国空军的驾驶员生产联体飞行服和求生装具背心。以前小批量的生产过一些背心，但是数量不多，因为ALPHA公司主要还是一生产飞行夹克为主.
首先，最容易的识别方法是认清ALPHA三杠商标。在飞行夹克的外面上你会找到一个小的ALPHA商标。第二点，衣服内里，衣服里子有一个大的商标牌，上面有各种参数，和保养说明等。最后，看黑白相间的军用参数标牌。（部分款式）
....除此之外，ALPHA夹克的选料与众不同，面料重而手感质量高。所有铜扣上均有ALPHA英文字母和商标。
ALPHA除了为空军之外还为其他军种生产夹克吗？
....是的ALPHA是美国最大的飞行夹克生产商。它还为陆军和海军以及其他军兵种生产军服。CVC战车夹克，海军防水套服，G8 GOER-TEX 套服，以及国民警卫队，海岸警卫队的MP-TEX面料的服装。
பைடு நூலகம்
再补充两点ALPHA的知识：
....现在国内很多朋友认为ALPHA做BDU，有的不良商家也骗人，我为此事专门问过他们现在特地澄清，希望大家不要买什么正宗ALPHA公司的美军BDU。
ALPHA 40周年纪念版的 MA1 夹克有何特别？
....ALPHA公司1999年为纪念公司成立40周年，在其经典产品MA1飞行夹克的基础上特制了一款纪念版的MA1夹克名称叫“BLOOD CHIT” 。它的外观和普通的 MA1没有区别，但是在其衣服的橘红色内里上缝有一块很大的白棉布，上面印有美国国旗和十余种文字书写的有“我是美国飞行员，我的飞机坠毁，我的处境急需救助。。。。。。”内容的字样的求生文告。（很典型的美军作风）。

阿尔法 Gyroscope U52006 说明书

3B SCIENTIFIC ® PHYSICSGyroscope U52006Instruction sheet9/05 ALFAccessories for Gyroscope U520101Disc2Gyroscope axle 3Bobbin4Set of accessories U520105Tripod stand 6Stand rod7Counterweight, large 8Counterweight, small 9Adjusting screw bl Scalebm Spirit level567893412bl bm The gyroscope is used for demonstration and experimen-tal quantitative derivation of the laws of gyrostatics. The following topics can be dealt with experimentally:•Moment of inertia of the disc•Turning moment/angular momentum •Precession •Nutation1. Safety instructions•Make sure that the gyroscope is standing firmly on the surface•Make sure no components of the gyroscope (disc,weights) can fall down.2. Description, technical data2.1 GyroscopeThe gyroscope includes a vertical stand rod 6 to which is attached a gyroscope axle 2 that can be rotated ver-tically and horizontally on its bearings. A disc 1 mount-ed on double ball bearings is fitted on one side of the axle. At the other end, there are two counterweights 7,8 that can be moved to balance the axle. Fine adjust-ments can be made at the end of the axle by means of an adjusting screw 9. To generate external turning mo-ments, a hanger with an additional weight is suspended from the axle. The angle of inclination of the axle is dis-played on a scale bl which is clear and easy to read. A spirit level bm is provided so that the gyroscope can bealigned to the horizontal. The disc can be made to rotate either manually or by means of a string. The double ball-race bearing guarantees almost frictionless rotation that goes on for an extended period of time. The open con-struction of the gyroscope facilitates excellent observa-tion of the gyroscopic phenomena.Scale:– 45° to +45°Scale divisions:1°Disc:250 mm ØMass of disc:1500 gMass of counterweights:50 g, 1400 gTotal mass:4650 g2.2 Accessories for the gyroscopeThe set of accessories for the gyroscope U52006 consists of an additional disc and a counterweight. It is used to demonstrate the cancellation of gyroscopic forces when two discs rotate in opposite directions with the same rotational speed.3. TheoryA gyroscope is a rigid body that rotates around an axis that is fixed at one point. If no external turning moment is applied, the axis of the gyroscope (being equivalent to the axis of its angular momentum) maintains its position in space. If, however, an external force is applied to the axis, then this turning moment effects a change in angu-lar momentum. As a result, the axis is laterally displaced. The gyroscope moves in a direction perpendicular to both its own axis and to the acting force. This motion is called precession. If an impulse is applied to the axis of the gyroscope when it is spinning normally, the resulting turn-ing moment causes an additional angular motion and the gyroscope starts to wobble. This wobbling motion is called nutation. In general, both motions are superim-posed on one another.4. Operation•Place the tripod stand 5 on a level, non-vibrating work surface.•Insert and fix the stand rod 6 into the tripod stand.•Insert the gyroscope axle 2 into its bearing.•Align the device in a horizontal position by using the spirit level bm.•Slide the disc 1 and the counterweights 7, 8 along the axle. Use the locking ring to securely fix the disc and balance the gyroscope. Use the adjusting screw 9 for making fine adjustments.•Rotate the gyroscope manually or with the help of a string wound into the bobbin 3.5. Examples of experimentIn order to conduct the experiments, the following addi-tional equipment is required:•Mechanical adding stopwatch U11901 for measuring the precession and nutation frequencies.•Stand rod U15002 and bosshead U13250 for fixing the gyroscope.•Light barrier U18020 and digital counter U21005 for measuring the period of rotation of the gyroscope disc.5.1 Determining the moment of inertia I of the disc •Set up the gyroscope as shown in Fig. 1 and balance it.• A known turning moment D is applied to the disc.The resulting angular momentum dω/dt is measured.The following equation applies:d Ddt Iω=•To apply this turning moment, wind a string around the bobbin, suspend a weight from one end of the string and allow the weight to fall.•Turning moment D = mgr (m = mass of accelerating weight and r = radius of bobbin).•To determine the angular acceleration, measure the time ∆t between releasing the disc and when the weight hits the floor.•Next determine the angular velocity ωE. To do so, use the light barrier to measure the period of one disc revolution. Before starting the experiment, glue a thin strip of paper onto the rim of the disc.•The moment of inertia I is calculated using the equa-tion:ddt tωω=∆ED tI=∆ωEFig. 1: Determining the moment of inertia of the disc5.2 Precession•The aim of the experiment is to demonstrate preces-sion and to study the interdependence of the period of precession and the frequency of rotation of the disc.•Set up the gyroscope as shown in Fig. 2 and balance it.•Suspend an additional weight from the axle.•Make the device rotate either manually or with the help of the string.•The gyroscope displays precession.•Determine the rotational frequency f of the disc and measure the period for one precession cycle T P .•The relation between f and T P is calculated using the following equation:D t I =∆ωE where R is the distance from the fulcrum of the gyro-scope axis to the point where the additional weight m is attached.•Take further measurements at decreasing rotational frequencies.•Plot a graph of the frequency of rotation as a func-tion of the period of a precession cycle.•As an alternative to the method described above, the moment of inertia I of the disc can also be deter-mined from the straight line gradient a .m g R f a π2=4•Repeat the experiment using a different added weight.It can be determined that the precession frequency is approximately proportional to the added mass.5.3 Nutation•The aim of the experiment is to demonstrate nuta-tion and to study the interdependence between nu-tation frequency and frequency of rotation of the disc.•Set up the gyroscope as shown in Fig. 3 and balance it.•Make the disc rotate, either manually or with the help of the string.• A slight lateral push to the spinning axis of the gyro-scope will initiate nutation.•In order to make a quantitative evaluation of the experiment, determine the period of a suitable number of nutation cycles.Fig. 2: Precession•Subsequently measure the period of rotation of the disc.•Make further measurements at slower disc frequen-cies•Plot a graph of the nutation frequency as a function of the frequency of rotation of the disc.•The nutation frequency is proportional to the rota-tion frequency.5.4 Cancellation of gyroscopic forces•As shown in Fig. 4, slide a second disc and counter-weight along the axis and secure with the locking ring.•Balance the gyroscope.•Attach the additional weight.•Manually rotate the discs. Make sure they rotate in the same direction. To see the direction of rotation more clearly, you can glue a piece of white paper onto each disc.•Demonstrate precession and nutation.•Now wind each end of the string in opposite direc-tions around a different bobbin.•When the string is pulled, both discs begin to rotate in opposite directions with approximately the same rotational speed.•Demonstrate the cancellation of gyroscopic forces.Fig. 3: NutationFig. 4: Cancellation of gyroscopic forces。

美国ALPHA阿尔法

美国ALPHA阿尔法基本介绍本文章来源：主题名品网｜户外装备。

阿尔法（Alpha）历史，首先让我们回到1959年的美国田纳西州东部城市诺克斯维尔市。

当时航天飞行技术提高，飞机可以到达更高空，同时飞行地面部队艰苦的作业环境，这都使得士兵们对技术装备和日常生活有了新的需求，也正式考虑到这些需求，美国国防部决定委托位于诺克斯维尔市的阿尔法工业为其改良一批军用夹克。

简单的任务造就了卓越的品牌。

接到任务后，阿尔法对旧夹克在风格上进行了大胆的创新和改良，采用上等织布，缝制了一批设计合理、工艺精细、质量更佳的夹克，圆满完成了国防部的重托，从此其产品也赢得更保暖、更舒适、更方便、更值得信赖的良好声誉。

阿尔法纪念夹克50岁的Alpha公司1959年诞生于美国的田纳西州，它是在三家公司--Superior TogsCorporation、Rolen Sporswear 以及DobbsIndustries的基础上发展而来的，自成立以来，Alpha公司始终是美国国防部指定的军服供应商之一，并多次获得美国国防部颁发的"杰出质量奖".为纪念其成立50周年，特别推出了这款50周年纪念夹克。

此夹克为限量版，全球只有几百件，每件都有编号，独具收藏价值。

阿尔法飞行夹克Alpha 阿尔法MJL32020C1 L-2B飞行夹克不同于L-2A的蓝色，这款轻薄的飞行员夹克是绿色的，是为了方便朝鲜战争中被击落的飞行员进行伪装，逃避敌人的搜捕。

跟传统的飞行员夹克一样，100%防水尼龙缎表面，棉缎内里，魔术贴肩章，正面有两个带盖口袋，阿尔法独特的功能铅笔口袋。

阿尔法野战风衣M1951式野战风衣是朝鲜战争时期美国士兵的标准配备，前身是美军在1950年设计的M1950式风衣，在二战结束后没多久又爆发了朝鲜战争，为了应战争需要。

美军在二战时期的M1943式风衣设计基础上推出了M1950式风衣，但只进行了少量改进。

后来，美军推出M1965式野战风衣后逐渐取代了M1950风衣。

常用服装外贸英语词汇

欢迎加入外贸交流群：75877457实惠网外贸平台外贸官方博客/995540456游戏新手卡领取 3-plys export carton 三坑出口纸箱a pair of braces 一副裤子背带accessory 辅料acetate lining 亚沙迪里布，亚沙地里布air freight 空运费allover embroidery 全身绣花，[粤]全身车花anti-pilling agent 抗起毛剂antistatic finish 防静电处理automatic lock (zip) 自动锁拉链apparel 成衣applique 贴布绣appearance quality 外观质量approved swatch 确认的样布armhole，scye 袖窿，[粤]夹圈[欧]Art.No.，[美]style No. 款号assembling of front & back part 前后幅合并assorted color 混色assorted size混码assorted color assorted size 混色混码attach collar 上领，绱领attach cuff to sleeve 车袖头到袖子上，[粤]车鸡英到袖子上attachment （安装在衣车上辅助车缝的）附件attention card 注意autolock zipper 自动锁拉链azo dye 偶氮染料back cover front 后搭前，后盖前back rise 后直裆，[粤]后浪back stitch 回针，倒针，[粤]返针back 后片，后幅backless dress 露背裙barb wire，loop pin 行李索bar code sticker 条码贴纸，条形码贴纸bargaining 讨价还价base layer （多层服装的）内层basting 疏缝，假缝bead （装饰用）有孔小珠bell bottom 喇叭裤脚belt 带，腰带belt loop，（belt-loop，beltloop）腰带袢，裤带袢，[粤]裤耳，耳仔bias cut 斜纹裁，[粤]纵纹裁binder 滚边器，[粤]拉筒，包边蝴蝶，滚边蝴蝶binding 滚边binding tape 滚条bleach spot漂白斑bleach 漂白blended 混纺blouse 女衬衫，类似衬衫的女上衣bodice 衣服大身部分body 上衣的主要部分（除领、袖外）[粤]衫身bottom，hem 下摆，[粤]衫脚，裤脚bottoms 下装（下半身的服装。

阿尔法Alpha CWU-45P飞行夹克

阿尔法Alpha CWU-45P飞行夹克基本介绍本文章来源：主题名品网｜豆妹户外装备。

CWU-45/P是Alpha受雇于美国国防部专为飞行员设计的一款夹克，受到美国空军的广泛好评。

如今它不再是单纯意义上的军服，反而成了一种经典，逐渐融入到人们的生活中。

致密的尼龙材质，手感光滑有光泽，内部添加有厚实的填充物，保暖性能非常优越，在零下10℃的天气中穿着皆可。

该款夹克轻盈保暖，款式简洁大方，因优越的御寒能力、干练的外形、坚固耐用的特性而成为服装业夹克衫的经典。

Alpha品牌的服装以保暖御寒、宽松舒适、可靠耐用，并能适应多变的恶劣气候环境而闻名世界。

如今，许多美军夹克和风衣的设计与生产的革新，都起源于Alpha的精英设计团队。

不管是翱翔于蓝天的飞行员、还是行走在街道上的路人、亦或者是上流社会成员、或是著名的国内外明星等，都有Alpha的存在，阿尔法也凭借其一如既往的创新精神引领着服装与时尚的潮流。

详细参数品牌：Alpha阿尔法产品名称：Cwu 45/P飞行夹克颜色：黑色/绿色/枪灰色领型：翻领主要功能：防风、防水、御寒、保暖材质：100%尼龙+100%涤纶内衬尺码：XS/S/M/L/XL/2XL/3XL/4XL/5XL产地：中国用途：军事训练、户外野营、远足探险、地质勘探、野外垂钓、远足登山、旅游休闲品牌特性1、顶级防水面料顶级防水的100%尼龙面料，比一般尼龙更致密，密实防风，保暖性强，防水性佳；2、保暖涤纶内衬优质厚实的加棉内里，采用100%涤纶材质，质地轻盈、柔软透气、穿着舒适、保暖性强；3、立体剪裁缜密车缝严格按照产品的版型与尺寸裁剪，车缝线精密工整，做工考究，品质经过层层关卡检测，质地坚韧结实抗撕裂；4、专利Alpha拉链Alpha专利五金拉链，闭合爽滑密实，经久耐用，大号拉链头硬朗大气，细节彰显卓越品质；5、胸前百变魔术贴左胸前设有Alpha经典LOGO魔术贴，并配有原厂魔术贴，也可粘住姓名标牌、徽章等；6、紧致松紧袖口袖口采用弹力十足的松紧式设计，能够更好地防风保暖，穿戴快捷，符合现代快节奏要求；7、束身式下摆阿尔法45P典型的束身式下摆设计，有效保暖的同时还具修身效果，简洁又不失时尚；8、两侧魔术贴口袋两侧大空间口袋采用魔术贴封口，安全不易松脱，可收纳钱包、记事本、手机等大件物品；9、内部左侧内袋衣服内部左侧设有隐藏式内袋，适合存放证件、钱包、手机等贵重物品，取拿便捷迅速。

赫亚-阿姆普罗贝 AMP-300-EUR 系列产品说明书

AMP-310-EUR AMP-320-EUR AMP-330-EURsecuencia de fases en sistemas calefacción, ventilación y aire AMP-310-EURPinza amperimétrica CA, calefacción, ventilación y aire acondicionadoAMP-320-EURPinza amperimétrica de CA/CC paramantenimiento de motores eléctricosAMP-330-EURPinza amperimétrica CA/CC industrialesAplicaciones de la serie AMP-300-EUR• Medición precisa de corriente, tensión y frecuencia en todos los sistemas eléctricos, incluidas señales distorsionadas y no sinusoidales (función de verdadero valor eficaz) y variadores de velocidad (filtro de paso bajo).• Medición de capacitancia de condensadores de arranque de motores.• Funciones de resistencia y continuidad para verificar la calidad de las conexiones eléctricas y comprobar si las bobinas de los motor y el transformador funcionan correctamente.• La prueba de rotación de fases ymotor trifásico permiten la conexiónadecuada de un motor a un sistematrifásico. Los motores conectados deforma inadecuada girarán en direccióninversa. Esto puede destruir el propiomotor u otros equipos conectados.• El filtro paso bajo permite la mediciónde corriente y tensión en variadoresde velocidad (motores con velocidadcontrolada mediante frecuencia). Sin estacaracterística, el medidor proporcionaríalecturas erróneas al medir la tensión y lacorriente.• Salida de microamperios de CC paramedición de sensores de llamas. Permitecomprobar el funcionamiento correctodel sistema de seguridad del sensor dellama en aparatos que funcionan con gas.Un sensor roto en un dispositivo de gasimpedirá que la válvula de seguridad seabra, por lo que el equipo no funcionará.• La medición de la corriente dearranque para el control del arranquede los motores permite a los usuarioscomprobar que el motor recibe lacorriente necesaria para que el motorarranque de forma adecuada.Pinza amperimétrica CA para calefacción, ventilación y aire acondicionado AMP-310-EUR Pinza amperimétrica de CA/CC para mantenimiento demotores eléctricos AMP-320-EUR CA/CCPinza amperimétrica AMP-330-EUR CA/CC de 1.000 A paramantenimiento de motores industrialesAMP-200-EUR y AMP-300-EUREspecificaciones detalladasAMP-200-EUR y AMP-300-EUREspecificaciones generalesAMP-210-EURAMP-220-EURAMP-310-EURAMP-320-EURAMP-330-EUR®®AMP-310-EUR AMP-320-EUR AMP-330-EUR。

1212淘宝精选爆款清单Excel

1750.00 22%
读你原创设计师品牌女装大码女装保暖棉衣外套多色选择穿出百变风格面料考究工艺绝佳，上身效果一流清新的苹果绿衬托出姣好气色热销万件、好评连连、穿着舒适！遮风防水保暖易清洗秋冬加厚打底连衣裙高档羽绒棉棉服柔软保暖舒适澳洲美利奴羊羔毛皮毛一体适合120-190斤胖mm穿休闲百搭，文艺复古优质面料，厚实保暖，气质款！超高性价比欧美红色毛呢大衣面料柔软舒适做工优质上乘渐变颜色设计、时尚艳丽！史上最低限量亏本秒杀中年妈妈装短款休闲羽绒棉棉服大厂直供全店包邮机车女皮衣加绒加厚保暖原创设计时尚绣花大厂直供历史最低零利润纯棉棉衣防静电，妈妈最爱！出厂价推广时尚打底裙显瘦百搭必备外套 a型娃娃款，宽松可爱减龄大厂直供历史最低价仅限双12 假两件短裤设计！简单！时尚！高品质磨毛面料！加厚保暖！厂家直供全店包邮高端百搭气质款，值得拥有保暖加厚历史最低价5折抢购甜美毛呢大衣超修身显瘦彩虹色毛绒气质大牌读你原创设计师民族风女装中老年冬装加厚连帽毛领棉服大码显瘦中长款毛呢外套仅限今天人手必备历史最低价 3D立体剪裁，时尚百搭！欧美经典格纹羊羔绒加绒加厚百搭毛衣，前短后长有设计感。仅限今天人手必备历史最低价时尚保暖大码修身款
立即购买立即购买立即购买立即购买立即购买立即购买立即购买立即购买立即购买立即购买立即购买立即购买立即购买立即购买立即购买立即购买立即购买立即购买立即购买立即购买立即购买立即购买立即购买立即购买立即购买立即购买立即购买立即购买立即购买立即购买立即购买立即购买立即购买立即购买立即购买立即购买立即购买立即购买立即购买立即购买立即购买立即购买立即购买

1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。

美国阿尔法ALPHA 皮毛一体B3飞行皮衣皮夹克
基本描述
本文章来源：主题名品网｜户外装备｜豆妹户外装备。

美国阿尔法B3羊毛飞行夹克
B3飞行皮夹克，是很少的一款从二战时期一直到现在都热销的军服。

因为，B3的款式设计几乎很难让人相信这是一款军服。

最正宗的B3通常是棕色的皮革配合米白色的羊羔毛，颜色搭配非常协调。

让人一看就有一种轻松，随意温暖舒适的感觉。

它有一个大的外翻的毛领，衣服的袖口和下摆都有一圈外翻的毛边，这几乎是很多皮草大衣的流行设计，似乎永远也没有过时的感觉。

它的毛领可以竖起来，并有两道牛皮皮带把它束紧，可以严严实实地包裹住你的脖子，防止风从衣领口灌进。

它的下摆左右也各有一条可以调节松紧的皮带，可以通过调节它们来收缩衣服的下摆，以便通风防止身体过热。

衣袖也可以翻卷调节长度。

衣服左右各有一个深的斜插口袋用来暖手或装东西。

总体的款式就象圣诞老人的那件外套。

既把羊皮连羊毛一起取下后加工处理，这样处理的皮革最大限度保留了它的柔软，致密，透气保暖的特性。

而且毛和皮的牢固程度也很高，提高了耐用性，羊毛的长度也基本一致手感极佳。

这种处理的羊毛被成为“SHEARLING”。

B3的内里全部采用了SHEARLING羊毛内里，具有不可比拟的保暖性。

当你打开一件B3时，你会觉得那是一条平铺在底上的羊毛地毯，自然就能体会到一种舒适，温暖而柔软的感觉，真是妙不可言。

由于它是军品，所以在设计和制造种为了追求最好的使用性能而不惜工本。

衣服全部采用最好的绵羊羊羔皮毛
（甚至包括口袋也不例外）；重型的氧化铜金属拉练，所有金属件全部采用了表面耐腐蚀处理；衣服所有接缝处采用牛皮条加强。

以上的标准使这件衣服具有了最高的耐用性和保暖性。

最打动人的还是它的全绵羊皮的用料，B3的选料用的是优质的绵羊羊羔的皮革，采用的是一种叫“皮毛一体”的皮革处理工艺。

可以用皮带束紧的毛领（注意金属件表面已经做了防腐蚀处理不反光，类似磨沙感觉）正是由于以上的优良特性，使得B3夹克自问世以来不仅受到了军方的好评，同样也得到了
民间的喜爱。

在国外很多人把它视为冬季抵御寒冷的
佳品，直到现在依然是很受欢迎的皮服。

我们经常可
以在电影或电视里看到外国人穿着它配着兰色牛仔
裤，很潇洒地在冰天雪地里神情自若得走着。

如果你
爱骑摩托，穿上它在冬季骑车你就更本没有机会体会
寒冷了。

在冬天它也特别适合外出或休闲的场合，它
的皮革的皮质类似一种磨沙的感觉，看上去很厚实，
手感柔软给人一种自然穿旧的沧桑感（似乎很多经典
的军服都能带给人这种感觉如M65）它能够完全满
足你对保暖的需求，而且又不失风度。

我甚至看到有
女士也穿它。

这是一件很难找出缺憾的衣服，同样也是不折不
扣的经典。

如果非要说它的缺点，估计就是太重，穿
上显得很臃肿。

但是正是由于B3采用了最好的皮革
原料才会有如此的质感，在冰天雪地的寒冻在室外，大家也都包得严严实实。

所以这也算不得什么了。

B3外号夏尔巴人羊毛皮衣介绍
夏尔巴人（Sherpa），族名在藏语中表示“来自东方的人”，相传先祖来自中国甘孜地区。

是一个散居在中国、尼泊尔、印度和不丹等国边境
喜玛拉雅山脉两侧的民族，操藏语族夏尔巴语，但
无文字，书面使用藏语。

夏尔巴人（Sherpa），又称：
雪巴人、谢尔巴人。

是尼泊尔和印度的山地民族，
以“喜马拉雅山上的挑夫”著称。

雪巴人信仰藏传佛教，饮食以高热量的马铃薯
为主、爱喝酥油茶、糖分高、热量高的食物为主、
雪巴人是天生的登山运动健将，他们几乎用一生的
时间来从事登山运动这项活动，雪巴人现在很多人
在从事攀登珠峰的登山向导这项工作，因此喜欢挑
战极限运动的朋友可以收件阿尔法的B3找个雪巴向
导亲自检验一下B3的功力，也顺便尝尝雪巴族的美
味饮食，体验一次雪巴人的豪华早餐，他们的土豆
饼配辣椒酱绝对一绝，他们非常注重早餐的热量补
充。

雪巴服饰也是保暖御寒为主，雪巴族生存环境冬季非常严寒漫长，服饰多以防寒性能优越的羊皮为主，B3飞行夹克就是采用优质整片羊皮制作而成。