天梭T-Touch时间调整手方法
141-en T-TOUCH EXPERT
Polar
Temperate
Arid
Tropical
Mediterranean
2 sec. or
Climate zone display
Setting mode
Select hemisphere: North = North, South = South not set = not set
Set the local climate: T = temperate; M = Mediterranean; A = arid; tr = tropical; P = polar
Validate setting
w ww. ti ss o t .c h
4/13
141_EN
T-TOUCH EXPERT
*
Setting > Standby
Standby mode is a battery economy mode. All the functions are deactivated, with only the time & date counters updated. This mode economises the battery when the watch is not being worn.
*
T-TOUCH EXPERT User’s Manual
Acknowledgements
We would like to thank you for choosing a TISSOT watch, a Swiss brand among the most highly renowned in the world. Your T-TOUCH watch has the most recent technical innovations. It gives you a constant analogue time display and a variety of digital displays. In addition, the following functions can be accessed simply by touching the glass: Weather, Altimeter, Chronograph, Compass, Alarm and Thermometer.
T-TOUCH SOLAR E84 用户手册说明书
T-TOUCH SOLAR E84 USER’S MANUALAcknowledgementsWe would like to thank you for choosing a TISSOTwatch, a Swiss brand among the most highly renownedin the world. Your T-TOUCH SOLAR E84 watch enjoysthe most recent technical innovations. It gives you aconstant analogue time display and a variety of digitaldisplays.In addition, the following functions can be accessedsimply by touching the glass: Meteo, Altimeter,Chronograph, Compass, Alarm and Countdown.Official service centers adresses&Recommended service priceswww.tissot.chTISSOT TACTILE WATCHES MUST ONLY BE SERVICED BY TISSOT’S AUTHORIZED CUSTOMERSERVICE CENTERS, WHICH ARE LOCATED IN OVER 160 COUNTRIESWARNINGIn Battery display mode, chargestate (see page 6)Touch-sensitive glass activeWater resistance: 10 bar (100 m / 330 ft)ML2016 accumulatorWeek number or day of the week display(see page 4)� other data may be displayed depend-4)� other data may be displayed depend-)� other data may be displayed depend-ing on the selected function.Refer to the functions for further detailsAzimuth heading settingdirection display (see page 15)FUNCTIONSActivating the touch-sensitive glassActivate glassWhen the glass is activated, thesymbol will flash on the digital display.If the glass is not touched, it will automatically deactivateafter 20 seconds.Exception: In time-setting mode, the glass will deactivateafter 60 seconds.Date display = Default displayTime 1: T1 displayTime 2: T2 displayBattery charge level display (see page 5)Options display (see page 6)DATE > SETTINGThe calendar is perpetual, i.e. the number of days per month is predefined. The date units are linked, so completing a full cycle of the months will move the year forward.BAT (BATTERY) > READING THE CHARGE LEVELIn this state, the watch can no longer operate correctly.All the functions are deactivated, except for time T1 and the date. The watch will enter energy saving mode (see page 9).The watch will need to be exposed to light to obtain sufficient charge to run normally.Battery drainedBattery flatThe watch is stopped.It automatically exits this state after prolonged exposure to light.The time and date must be reconfigured upon exiting this state .A micro-controller manages the watch's consumption and the battery charge state display. According to this state, it deactivates certain functions, or switches the watch to energy saving mode (see page 9).Note 1: The battery charge is checked periodically (1x/min), and continually when the light is activated.Note 2: You are advised to recharge the battery within a few days of the "bAt" symbol appearing.Note 3: When fully charged and used sparingly, the watch can operate for up to one year in a low-light environment.Battery charge timeThe table below indicates the charge time recommended for daily use.Exposure levelDaily use Sunlight outdoors7 minutes Sunlight through a window 16 minutes Daylight with cloudy sky 26 minutes Daylight indoors2 hours Fluorescent light indoors5 hoursNote: If the battery is completely flat, the watch must be exposed to light for at least 18 hours before it can be used.recharged by means of the solar cell.displayBattery at 1/3 charge Battery chargedBattery at 2/3 charge Battery drained or flatBAT (BATTERY) >GLOSSARYOPTIONS > READINGSETTINGThe watch needs to be synchronised if the watch hands do not display the same time as the digital display, or if they are not correctly superimposed when accessing the functions.The watch is desynchronised when its electric motor mechanism has been disrupted, by heavy impacts for example.NB: The glass must be active to access synchronisation mode.Synchronisation mode displayAL (ALARM) > WEEKEND DAYS SELECTIONThe alarm may be programmed to sound at the weekend or during the week only (see page 17). The days considered as the weekend mayhemisphere and climate zone to your geographic location. Select yourclimate zone according to the simplified Koeppen climate classification(see illustration on right).If the watch is not set ("Not Set"), the standard atmosphere modelis used: set temperature at sea level = 15°C, mean pressure at sea level:1013.25 hPaClimate zone display Setting mode Select hemisphere:nor =Northsou =Southnot =not setSet the local climate:tEM = temperate /MEd = Mediterranean /dRY = dry / tRO = tropical /POL = polarValidate settingNoteIt is not possible to select polarlocal climate for the SouthHemisphere.2 sec.or Polar Temperate Arid Tropical Mediterranean1 sec.1 sec.ECO (ENERGY SAVING MODE) > SETTINGThis mode is used to save the battery at night if the watch is not operated for one hour, when time T1 is between 22:00 and 5:00.The digital display is deactivated and the analogue display indicates time T1. The chrono or countdown are not stopped if theyare running. It is not possible to switch to energy saving mode from the Altimeter function.This mode economises the battery when the watch is not being worn.IMPORTANT: Calibrate the altitude or relative pressure by exiting standby mode, in order to obtain the correct altimetric and barometric values.Switch to standby mode after5 seconds Beep every secondBack to time & date modeb)/ : stop the count, the watchdoes not switch to standby mode.Activate standbymodeMETEO (WEATHER) > READINGIn meteo mode, the hands are superimposed to indicate the weather trend.The T-TOUCH SOLAR E84 program takes account of atmospheric pressure vari-ation over the last 6 hours to calculate the trend to indicate. Furthermore, thepressure variation caused by a rapid change in altitude is detected by the watchand compensated for automatically. So it only has a minimal impact on thebarometric trend.The T-TOUCH SOL AR E84 digital displayindicates the absolute and relative atmos-pheric pressure values in hectoPascals [hPa].Absolute atmospheric pressure is the actualpressure at the time and place of measure-ment, and cannot be altered. Relative pres-sure is a value relative to sea level, basedon local absolute atmospheric pressure.Barometers and weather charts show relative pressure values. The relativepressure value depends on the climate zone set, and can be preset on thewatch. The relative pressure presetting is in line with the altitude.Characteristics of functionMeasurement range: absolute pressure: 300 hPa to 1100 hParelative pressure: 950 hPa to 1100 hPaAccuracy: absolute pressure: ± 3 hParelative pressure: varies with altimeterResolution: 1 hPaUnit conversion: 1 hectoPascal [hPa] = 1 millibar [mb]Description of functionIn weather mode, the hands are superimposedto indicate the weather trend.Explanationsatmospheric pressure. When atmospheric pres-sure increases the sky clears. The area is thenreferred to as a "high pressure" area or "anticy-clone" (A). When atmospheric pressure decreas-es the sky clouds over. The area is then referredto as a "low pressure" area or "depression" (D).The T-TOUCH SOLAR E84 watch measures thesepressure variations and indicates the weatherthe weather developments:- 6’: Big pressure drop, rapid deterioration- 4’: M oderate pressure drop, probabledeterioration- 2’: S mall pressure drop, probable slightdeterioration12 o'clock: N o notable weather change+ 2’: S light pressure rise, probable slightimprovement+ 4’: M oderate pressure rise, probableimprovement+ 6’: Big pressure rise, rapid improvementALTIMETER > READINGThe altitude is displayed on the digital screen for 10 hours continuously. After 10 hours, altimeter mode is deactivated,and the date is displayed.The altitude unit system for displaying the altitude (m or ft) depends on the m/ft unit configuration in the options (see page 8).We advise you to stop the altitude difference meter during rest times and then restart it, in order to obtain more accurate results.Note 1: "Presetting" an altimeter means setting it to the actual altitude of a known point (see pre-setting procedure on page 11). The actual altitude values are indicated on various media: signposts, contour lines and spot heights on maps. The al-titude "presetting" is in line with relative atmos-pheric pressure.Note 2: In an airliner, since the cabin is pressurised, your altimeter will not indicate an accurate altitude.Note 3: To optimise the accuracy of your altimeter, you are advised to select the climate zone, see page 9.Characteristics of functionDescription of functionIn altimeter mode, your T-TOUCH SOL AR E84 be-comes a barometric altimeter, displaying the alti-tude relative to mean sea level.ExplanationsThis is a barometric instrument, which calculates the altitude as a function of absolute pressure (atmospheric). As the altitude rises, pressure drops, and vice versa. So the altimeter measures the difference between absolute pressure (atmos-pheric) and relative pressure (relative to sea level)to display the altitude. Your T-TOUCH SOLAR E84 is temperature compensated, and you can adjust your geographic location (hemisphere and climate zone). The altitude displayed is therefore corrected automatically.This makes it the ideal instrument for measuring vertical movement with the altitude difference function (e.g. in mountain trekking). The altitude difference meter indicates the elapsed time, cumulative altitude gains and losses and mean vertical speeds of ascent and descent.ALTIMETER > GLOSSARYMeasurement range – 400 m to +9000 m– 1333 ft to +29,500 ftAltimeter resolution 1 m3 ft Unit conversion1 metre [m] = 3.281 feet [ft] 1 foot [ft] = 0.305 metres [m]Altitude difference meter max. measurement time 99 days 23 hours 59 minutes 59 secondsMaximum altitude difference +/- 30,000 m+/- 99,000 ftAltitude difference meter resolution1 m 3 ft Maximum vertical speed 4999 m/min (appr. 300 km/h)16,401 ft/min (appr. 187.5 mph)Minimum vertical speed 5 m/min (appr. 0.3 km/h)16.4 ft/min (appr. 0.2 mph)Vertical speed resolution 1 m/min3 ft/min Minimum vertical movement 5 m 16 ft Minimum time of movement5 mins5 minsIMPORTANT: The stored data (lap times, see page 13 or split times, see page 14) is erased when you start a chrono from zero. Only LAP or SPLIT 13 or split times, see page 14) is erased when you start a chrono from zero. Only LAP or SPLIT or split times, see page 14) is erased when you start a chrono from zero. Only LAP or SPLIT 14) is erased when you start a chrono from zero. Only LAP or SPLIT ) is erased when you start a chrono from zero. Only LAP or SPLIT chrono times are memorised. To be able to select the LAP chrono function, the SPLIT chrono needs to be reset.Activate glass LAP CHRONO (LAP TIME) > READING STORED DATAAll times measured by the lap time chronograph function are stored, and can be displayed on the watch with the statistics for the total race time, and the fastest, slowest and average lap times. Maximum timing limit: 99 d 23 h 59 min 59 sec.Activate glass Use the push-buttons to browse through thelap timesevent. For example: measuring the finish time for several runners in a 100 metre sprint.IMPORTANT: The stored data (lap times, see page 13 or split times, see page 14) is erased when you start a chrono from zero. Only LAP or SPLIT 13 or split times, see page 14) is erased when you start a chrono from zero. Only LAP or SPLIT or split times, see page 14) is erased when you start a chrono from zero. Only LAP or SPLIT 14) is erased when you start a chrono from zero. Only LAP or SPLIT ) is erased when you start a chrono from zero. Only LAP or SPLIT chrono times are memorised. To be able to select the SPLIT chrono function, the LAP chrono needs to be reset.Activate glassSPLIT CHRONO (SPLIT TIMES) > READING STORED DATAAll the times measured by the split times function are stored, and can be displayed on the watch.Maximum timing limit: 99 d 23 h 59 min 59 sec.Activate glassUse the push-buttons to browsethrough the split timesNote 1: After 1 h, the hour indicator is displayedExample:Note 2: After 24 h, the hundredthsdisappear, and the days, hours, minutes and seconds are displayedExample: Exit stored data reading modeat any timeBack to split time chronoangle between 12 o'clock and the minute hand.AZIMUTH > READINGIn compass mode, your T-TOUCH enables you to define and follow an azimuth. To do so, you need only set the azimuth value and align theCompassIn compass mode, your T-TOUCH SOLAR E84 indicates the True North Pole, factoring in magnetic declination.Compass explanationsThe vertical lines (meridians) on the Earth converge at the True North Pole (Ng), indicating its direction. The hand of a conventional compass indicates the direction of the Magnetic North Pole (Nm). The angle (α) between these two directions Ng and Nm is known as magnetic declination. The magnetic declination value depends on your location on Earth. Furthermore, the Magnetic North Pole is constantly moving. So the magnet-ic declination value also depends on the date. If the correct magnetic declination value (for the location and date) is set (see the setting procedure on page 15), the minute hand of your T-TOUCH SOL AR E84 will point to True North(Ng). If the magnetic declination is set to 0, your T-TOUCH SOL AR E84 will point to Magnetic north (Nm). The magnetic declination values and dates are indicated on topographic charts, or can be found using special software avail-able on the Internet.For the whole world:/AzimuthIn azimuth mode, your T-TOUCH indicates the azimuth heading you should take.Azimuth explanationsThe azimuth is the horizontal angle between the direction of an object from 0° to 359° (e.g.: East = 90°). In azimuth mode, the T-TOUCH when the 6-12 o'clock axis of the watch is aligned with the azimuth heading set.12 o'clock represents the azimuth heading relative to True North.Note 1For a correct indication of North, it is extremely important to hold the watch as level as possible.Note 2The compass function, like any other compass, should not be used near a metal or magnetic object. In case of doubt, you can recalibrate your compass.Characteristics of function Accuracy: ± 8°Resolution: 2°COMPASS > GLOSSARYreached, you can stop the alarm by pressing one of the push-buttons.ALARM > SETTINGThe alarm can be programmed to sound every day, on week days or at the weekend only (see page 8).TIMER (COUNTDOWN) > SETTINGMeasurement range: 99 days 23h59’59’’zero, the watch switches to chronograph mode for the race.REGATTA > SETTINGRegatta countdowndisplayRegattaA regatta is a race between two or more boats, generally sailing boats.It comprises several stages, and begins with a "start procedure" which can last up to 10 minutes, during which all the boats competing in the regatta must remain behind the start line. As the boats are constantly moving behind this line, the goal is to remain as close as possible to it when the countdown ends, in order to gain the advantage from the off. Throughout the "start procedure", cannon shots tell the regatta competitors the time remaining before the start signal. To maximise your chances of a flying start, you can synchronise your T-TOUCH SOLAR E84 with the cannon shots.Once the countdown has finished, the race starts and all the competitors must follow a course marked by buoys around which they must navigate on their way to the finish line. The boat finishing the course first wins the regatta.Description of functionYour T-TOUCH SOLAR E84 is equipped with a special countdown for regattas, which can be set to a value of between 0 and 10 minutes, and used during the regatta "start procedure". The watch emits a triple beep at the end of every minute, a double beep every ten seconds during the last minute, a single beep for each of the last 9 seconds, and finally a quintuple beep announcing the start of the race when the countdown reaches zero.Furthermore, during the countdown you can synchronise your T-TOUCH SOLAR E84 with the cannon shots using the "-" push-button. It is synchronised to the nearest whole minute.When the countdown reaches zero, it automatically switches to a race chronograph, indicating the days, hours,minutes and seconds elapsed on the LCD screen.Fast continuous settingWhen setting the watch, you can press and hold the push-button to switch to fast continuous setting mode, in which the display moves at a faster rate than in non-continuous or normal speed setting mode. To exit fast continuous setting mode, you need to release the push-buttons for 1 second to continue in normal speed setting mode.SENSOR FAULT5 sec.When a function is selected and the display is cleared, it is probably due to a failure of the selected function's sensor.Error: the display is clearedBack to time T1 displayIf this happens, please contact your retailer.WARNINGSBattery type: ML2016 accumulator.To activate the functions on your T-TOUCH SOL AR E84 a gentle press on the push-buttons or touch on the glass is all that is required. Excessive force may damage the watch.The brightness of the digital display decreases when the hands are in motion.TemperatureDo not expose your watch to sudden temperature changes (exposure to sunlight followed by immersion in cold water) or extreme temperatures (e.g. under a car windscreen in direct sunlight).Watch operating range:-5°C to +55°C / 23°F to 131°FThe T-TOUCH SOL AR E84 is water resistant to 10 bar (100 m / 330 ft) at 25°C / 77°F, but it is not an instrument suitable for sports diving. You must not use the push-buttons when the watch is underwater. None of the functions can be activated if the glass is in contact with a liquid.A watch cannot be permanently guaranteed absolutely water-resistant. It may be affected by ageing of the gaskets or by an accidental impact on the watch. We recommend that you have your watch's water resistance checked once a year by an approved TISSOT ® service centre.CARE AND MAINTENANCEwww.tissot.ch 154_EN 21/21Do not expose your watch to intense magnetic fields such as those generated by speakers, mobile phones, computers, refrigerators or other electromagnetic appliances.Shocks and impactsAvoid thermal shocks or impacts, since they may harm your watch. In the event of a violent impact please have your watch checked by an approved TISSOT ® service centre.Harmful productsPrevent your watch from coming into any direct contact with solvents, detergents, perfumes, cosmetic products etc., since they may damage the bracelet, the case or the gaskets.CleaningWe would advise you to clean your watch regularly (except for the leather strap) using a soft cloth and lukewarm soapy water. After immersion in salty water, rinse your watch in fresh water and leave it to dry completely.Like any precision instrument, a watch must be serviced regularly for optimum operation. As a general rule, we recommend that you have your watch checked every 3 to 4 years by your approved TISSOT ® retailer or service centre. However, please note that depending on the climate and the conditions of use of the watch, a shorter interval may be required. To benefit from the highest standards of ser-vice and to ensure your guarantee remains in force, please always contact an approved TISSOT ® retailer or service centre.Additional information in the "International Warranty – Service centres" booklet.Collection and treatment of end of life quartz watches*This symbol indicates that this product should not be disposed of as household waste. It must be returned to an approved collection point. By following this procedure you will contribute to safeguarding the environment and human health. Recycling the materials will help to conserve natural resources.* valid in European Community member states and in any countries with com-parable legislation.。
天梭TTouch时间调整手方法
天梭T T o u c h时间调整
手方法
Document number【SA80SAB-SAA9SYT-SAATC-SA6UT-SA18】
天梭T-Touch多功能腕表时间、日期调校方法
文章导读：
天梭T-Touch多功能腕表时间、日期调校方法，日历是半永动型的，也就是说每个月的日期数是预设定的。
2月份时如果只有28天，则须重新设定日期....
一、T-Touch多功能时间设置
(1)精度：至+秒/天
(2)持续按住+或-以设置时间
在回转了整一圈后，分针停止，时针前进一步，即一小时。
二、天梭T-Touch多功能腕表日期设置
(1)日历是半永动型的，也就是说每个月的日期数是预设定的。
2月份时如果只有28天，则须重新设定日期。
数码手表的操作规程
数码手表的操作规程一、前言数码手表作为现代科技产品的一种，不仅具备基本的时间显示功能，还可以提供多种功能和便利，如计时、计步、闹钟等。
为了更有效地利用数码手表的功能，正确操作数码手表至关重要。
本篇文章将介绍数码手表的操作规程，帮助读者正确使用数码手表。
二、基本操作1. 启动和关机a) 启动：长按左侧按钮，手表显示屏将亮起并显示基本信息。
b) 关机：长按右侧按钮，手表将进入关机状态。
2. 时间调整a) 进入时间设置界面：按下右上方的设置按钮，手表将显示时间设置选项。
b) 调整时间：通过上下按钮或者触摸屏幕上下滑动，选中需要调整的时间项（如年、月、日、时、分等），然后再通过左右按钮或者触摸屏幕左右滑动，进行数值的调整。
c) 确认设置：调整完毕后，按下确认按钮或者长按中间的确认区域进行确认。
手表将自动保存设置。
3. 功能选择a) 选择功能菜单：通过向左或向右滑动屏幕，选中需要的功能菜单（如计时、计步、闹钟等）。
b) 进入功能模式：点击屏幕或者按下确认按钮，手表将进入对应功能的操作界面。
4. 返回和退出a) 返回上一级菜单：在任意功能界面下，按下返回按钮或者向右滑动屏幕，可返回上一级菜单。
b) 退出功能模式：在任意功能界面下，按下确认区域或者长按返回按钮，手表将退出当前功能模式，返回基本界面。
5. 其他操作a) 亮度调节：在基本界面下，按下左上方的亮度按钮，手表屏幕亮度将发生变化，通过多次点击可切换不同的亮度模式。
b) 提醒设置：在设置菜单下，可以设置闹钟、提醒等功能的具体参数。
c) 数据查看：在计步、心率等功能菜单下，可以通过滑动屏幕或者使用上下按钮查看相应的数据。
三、注意事项1. 防水防尘：数码手表通常具备防水防尘功能，请避免在深水中使用，并注意不要将手表浸泡在液体中。
2. 充电使用：数码手表大多采用充电宝或者USB充电方式，使用时请根据手表说明书进行正确的充电操作。
3. 注意触摸屏幕：如果你的数码手表配备了触摸屏幕，请使用清洁的手指或软布轻触，避免使用尖锐物体划伤屏幕。
手表调日期的正确方法
手表调日期的正确方法手表是我们日常生活中常用的配饰之一，而手表的日期调整是我们在使用手表时经常需要操作的一个步骤。
正确的日期显示不仅可以让我们及时了解到日期信息，也能够延长手表的使用寿命。
下面，我将为大家介绍手表调日期的正确方法。
首先，我们需要了解手表的日期调整按钮的位置。
大部分手表的日期调整按钮都位于表冠的第一档，即我们通常说的“一档”。
有些手表的日期调整按钮可能位于表冠的第二档，这需要根据具体手表的说明书来确认。
在调整日期之前，我们需要先确认当前的时间。
将表冠轻轻拔出，向外拧动，直到可以调整时间的位置。
然后，根据当前的时间是上午还是下午，将时间调整到12点。
这一步是为了避免在调整日期时出现日期跳转的情况，从而保护手表的机芯。
接下来，我们可以开始调整日期了。
将表冠往前拧动，直到日期开始跳动。
在日期跳动的时候，我们需要慢慢地将日期调整到前一天的日期，然后再将日期调整到当前的日期。
这样可以避免在调整日期时对手表的机芯造成不必要的损伤。
当日期调整完成后，我们需要将表冠重新按紧，确保手表的防水性能。
在将表冠按紧后，我们可以轻轻地转动表冠，确认日期是否已经调整到了正确的位置。
除了以上的操作步骤外，还有一些需要注意的事项。
首先，在调整日期时，我们需要尽量避免在晚上10点到早上2点之间进行日期调整，因为这个时间段正是手表机芯进行自动日期跳转的时间，如果在这个时间段内调整日期，可能会对手表的机芯造成不必要的压力。
其次，如果手表是机械表，我们需要每个月手动调整一次日期，以确保日期的准确性。
总的来说，手表调日期并不是一件复杂的事情，只要我们掌握了正确的操作方法，就能够轻松地完成日期的调整。
希望以上的介绍能够帮助大家更好地使用手表，让我们的生活更加方便和精彩。
天梭 T-Touch Expert Solar 用户手册说明书
View and download the Manual ofTissot T-TOUCH SOLARE84 Watch (page 1 of21) (English). Also support or get the manual by email. For adventurers and outdoor fans, we have expanded our iconic Tissot T-Touch Expert Solar collection with new models User Manual, Click here to download.
The Tissot T-Touch Expert Solar II is ready for an adventure. It will help you face the challenges ofthe wild or ofa big city.
The T-Touch Expert Solar is an important new model in the Tissot range. Tissot's The Tissot user's manual give information about the use, the settings. Tissot T-Touch Expert Solar 2017 Duration: 6:23. Tissot 143,322 views. How Tห้องสมุดไป่ตู้ Set. Tissot T-Touch Watch Fitness manuals and free pdfinstructions. Find.
手表调日期
手表调日期手表作为一种常见的配饰，是人们生活中的重要组成部分。
除了显示时间外，手表还可以显示日期功能，用户可以通过手表来了解日期。
然而，有时候手表的日期会出现错误，需要手动调整。
本文将介绍手表调日期的方法和一些技巧。
手表调日期的基本步骤如下：第一步，找到手表的调节按钮。
大多数手表的调节按钮位于表冠上。
表冠是手表的调节功能的一个重要组成部分。
第二步，将表冠向外拔出。
拔出表冠后，手表的调节功能将被激活。
第三步，根据手表上的刻度线，将表冠旋转。
刻度线通常用来表示日期的调节范围。
在大部分手表上，表冠可以逆时针或顺时针旋转。
第四步，调整手表的日期。
根据需要，将表冠旋转到正确的日期。
只需简单地旋转表冠，即可调整日期的显示。
请注意，有些手表可能需要转动表冠多次才能完成日期的调整。
第五步，按压表冠将其推回原位。
完成手表调日期的操作后，将表冠按压回到初始位置。
这样可以确保手表的日期设置不会被意外改变。
此外，还有一些常见问题和解决方法：问题一：手表日期调整错误。
解决方法：如果手表日期调整错误，可能是表冠调整不准确导致的。
请重新按照上述步骤进行调整，确保表冠正确旋转。
问题二：手表日期调整滞后。
解决方法：如果手表日期调整滞后，可能是手表的内部零件出现问题。
建议将手表送至专业维修人员处进行维修或更换零件。
问题三：手表日期调整异常。
解决方法：如果手表日期调整异常，可能是手表的电池出现问题。
手表的日期功能通常由电池提供动力。
建议将手表送至专业维修人员处更换电池或进行维修。
手表调日期的技巧和注意事项如下：技巧一：谨慎调节。
在调整手表日期时，要小心谨慎。
避免用力过猛或过快，以免损坏手表内部的零件。
技巧二：调整日期前先观察。
在调整手表日期之前，先观察手表的指针和日期显示是否正确。
确保手表需要调整日期后才进行调节。
技巧三：避免在指定时间范围内调整日期。
有些手表在特定时间范围内不建议进行日期调整。
请查看手表说明书或咨询专业人士，了解手表的具体要求。
天梭触摸表的指针时间和数字时间同步调整的步骤和方法如下
天梭触摸表的指针时间和数字时间同步调整的步骤和方法如下：
首先按3位的钮（T钮）一下（大约1秒），手表会发出“咻”的一声，观察天梭t-touch的液晶显示屏，秒位数字上面会有一横线出现并闪烁。
此时，用手指去连续触摸天梭触摸表的玻璃中心位置（图中1）二下，直到液晶显示屏出现24h 的显示。
接下来，按下3位的钮（T钮）不放，等待大约5秒钟。
天梭触摸表的时分针将会自行动起来，并最终停到表盘字符的某个位置上。
观察天梭t-touch的液晶显示屏，将显示出5ync Hro 的字样。
然后按下天梭t-touch表盘的2位钮（+钮），将分针顺时针调整到正对12点的字符。
如果一直按着2位的钮（+钮）不放，则分针会快速连续的运行，如果一下一下的按，那么天梭触摸表的分针就会一点一点的移动。
在精细的调整时候，需要一下一下的按这个钮。
最后一步，只需按下4位的钮（-钮），将天梭触摸表的时针顺时针调整到正对12点的字符。
如果一直按着4位的钮（-钮）不放，则时针会快速连续的运行，如果一下一下的按，那么天梭t-touch的时针就会一点一点的移动。
在精细的调整时候，需要一下一下的按这个钮。
当确认已经把分针和时针都调整到正对12点字符的时候，按3位的钮（T钮）一下，手表会发出“咻”的一声，随即，天梭t-touch时分针自动走到和数字显示时间一致的刻度上。
OK，天梭触摸表同步调整完毕。
详细图片示例请到表帝官网看。