HP一体机说明书
HP惠普 Smart Tank 798一体机 产品说明书
产品说明HP Smart Tank 798 一体机随附惠普原装墨水，彩色印量高达 8,000 页，黑色印量高达 6,000 页，帮您提高工作效率。
通过移动设备设置、 双面打印、触控界面和传真功能提高生产率，您可以直观地连接、工作和打印。
实现出色品质和价值 — 随附惠普原装墨水，彩色印量高达 8,000 页，黑色印量高达 6,000 页。
自始至终的出色打印体验使用分步指导视频快速设置您的打印机。
凭借可以自动连接的双频 Wi-Fi ®，建立更快、更可靠的连接。
使用集成式触控界面轻松管理任务，获得直观的体验。
使用集成式墨仓指示灯和纸张传感器,轻松监控并及时添加墨水及纸张。
快捷键可以大幅提高工作效率通过自动双面打印快速完成多页文档打印。
清晰的黑色文本，每次打印都获得生动逼真的彩色图形。
无需占用手机内存，即可直接从微信打印文档和网络文章。
工作速度快，无需手动操作 — 35 页自动进纸器助力您快速完成工作。
实现全面节约包装箱中随附惠普原装墨水，彩色印量高达 8,000 页，黑色印量高达 6,000 页。
借助此大容量墨仓系统，以非常低的单页成本实现高印量打印。
凭借惠普创新的防泼溅加墨系统，加墨更干净轻松。
环保打印此款打印机利用回收打印机材料及其他电子元件制成，其中可回收塑料重量占比 25% 以上。
获得 EPEAT 银牌认证的打印机：环保之选。
通过 HP Planet Partners 计划免费回收利用墨盒，轻松无负担。
惠普 FSC ® 认证纸张可回收利用，这有助于制止森林滥伐和保护野生动物。
注释需要下载 HP Smart App。
有关本地打印要求的详细信息，请访问 /go/mobileprinting。
某些功能/软件仅提供英语版，电脑版和移动设备版的应用程序之间有所差异。
可能需要订阅服务；并非所有国家/地区都提供订阅服务。
详情请访问 。
需连接互联网，并且需要单独购买。
注册惠普账户才能使用全部功能。
惠普彩色激光多功能一体机产品说明书 HP Color LaserJet Enterprise Flo
产品说明书HP Color LaserJet EnterpriseFlow MFP M880企业级彩色数码多功能一体机M880z•M880z+近场通信/无线直接打印HP Color LaserJet Enterprise Flow M880z+企业级彩色数码多功能一体机(具备近场通信/无线直接打印功能)如图所示HP Color LaserJet Enterprise Flow MFP M880z 企业级彩色数码多功能一体机1触摸打印功能在HP Color LaserJet Enterprise Flow MFP M880z+D7P71A机型上是标配，在HP Color LaserJet Enterprise M880z+ A2W76A和M880z A2W75A机型上是选配。
移动设备必须能支持近场通信(NFC)打印技术。
欲了解支持的设备，请访问/go/mobileprinting2H P Flow CM数码多功能一体机并非在所有地区都有售。
需要联网才能上传和下载文件。
可能需要额外的软件和许可。
3惠普通用打印驱动程序可通过/go/upd免费下载4 支持OS X® Lion、OS X Mountain Lion和运行iOS4.2或更高版本的以下设备：iPad®(所有机型)、iPhone®(3GS 或更高版本)和iPod Touch®(第三代或更高版本)。
与支持HP AirPrint的打印机兼容，要求打印机与OS X或iOS设备连接到同一网络。
无线性能取决于物理环境及与接入点之间的距离。
OS X、iPad、iPhone和iPod touch是Apple® Inc.在美国及其他国家和地区的注册商标。
AirPrint™和AirPrint Logo是Apple®Inc.的商标。
5纸张装载选件必须单独购买。
6 本地打印需要移动设备和打印机连接到同一网络，或与打印机有直接无线连接。
惠普deskjet f2100一体机基本使用手册说明书
HP Deskjet F2100 All-in-One series Basics GuideHewlett-Packard Company noticesThe information contained in this document is subject to change without notice.All rights reserved. Reproduction, adaptation, or translation of this material is prohibited without prior written permission of Hewlett-Packard, except as allowed under copyright laws. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.© 2007 Hewlett-Packard Development Company, L.P.Windows, Windows 2000, and Windows XP are U.S. registered trademarks of Microsoft Corporation.Windows Vista is either a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries.Intel and Pentium are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries.Contents1HP All-in-One overviewThe HP All-in-One at a glance (2)Control panel buttons (3)Status light overview (4)Load originals for scanning and copying (5)Make a copy (5)Scan an original (6)2Troubleshooting and supportUninstall and reinstall the software (7)Hardware setup troubleshooting (8)Clear paper jams (10)Print cartridge troubleshooting (10)Find more information (10)Setup Guide (10)Onscreen Help (11)HP Web site (11)Ink usage (11)HP support (11)HP support by phone (11)Phone support period (11)After the phone support period (11)Before calling HP Support (11)3Technical informationSystem requirements (12)Paper specifications (12)Physical specifications (12)Power specifications (12)Environmental specifications (12)Regulatory notices (12)Regulatory model identification number (12)Warranty (13)1t t1HP All-in-One overviewThe HP Deskjet F2100 All-in-One series is a versatile device that gives you easy-to-usecopying, scanning, and printing. For information about the full range of features andfunctions, see the onscreen Help.The HP All-in-One at a glanceLabel Description1Control panel2Input tray3Tray extender4Paper-width guide5Print cartridge door6Glass7Lid backing8Rear door9Rear USB port10Power connection**Use only with the power adapter supplied by HP.2HP All-in-One overviewControl panel buttonsControl panel buttons3H P A l l -i n -O n e o v e r v i e wStatus light overviewSeveral indicator lights inform you of the status of the HP All-in-One.Label Description1On button2Check Paper light3Check Print Cartridge light4Plain Paper Type light5Photo Paper Type lightThe following table describes common situations and explains what the lights mean. Light status What it meansAll lights are off.The HP All-in-One is turned off. Press the On button to turn on the device. The On light and one of the PaperType lights are on.The HP All-in-One is ready for printing, scanning, or copying.The On light is blinking.The HP All-in-One is busy printing, scanning, copying, or aligning theprint cartridges.The On light blinks quickly for 3 seconds and then is on steady.You pressed a button while the HP All-in-One is already busy printing, scanning, copying, or aligning the print cartridges.The On light blinks for 20 seconds and then is on steady.You pressed the Scan button and there was no response from the computer.The Check Paper light is blinking.•The HP All-in-One is out of paper.•The HP All-in-One has a paper jam.•The paper size setting does not match the paper size detected in theinput tray.The Check Print Cartridge light is blinking.•The print cartridge door is open.•The print cartridges are missing or not seated correctly.•The tape was not removed from the print cartridge.•The print cartridge is not intended for use in this HP All-in-One.•The print cartridge might be defective.Chapter 14HP All-in-One overviewLight status What it meansNOTE:Your printer might be packaged with only a tri-color printcartridge.The On , Check Paper, and CheckPrint Cartridge lights are blinking.Scanner failure.Turn off the HP All-in-One, then on again. If the problem persists, contact HP Support.All lights are blinking.The HP All-in-One has a fatal error.1.Turn the HP All-in-One off.2.Unplug the power cord.3.Wait a minute, then plug the power cord back in.4.Turn the HP All-in-One back on.If the problem persists, contact HP Support.Load originals for scanning and copyingYou can load many different types and sizes of paper in the HP All-in-One, including letter or A4 paper, photo paper, transparencies, and envelopes.For information about loading full-size paper, see the Setup Guide. For information about loading other paper sizes, see the onscreen Help.To load an original on the glass1.Lift the lid on the HP All-in-One.2.Place your original with the side you want to copy or scan face down on the left frontcorner of the glass.TIP:To get the correct copy size, make sure that there is no tape or other foreignobject on the glass.3.Close the lid.Make a copyYou can make quality copies from the control panel.(continued)Load originals for scanning and copying 5To make a copy from the control panel1.Make sure you have paper loaded in the input tray.2.Place your original print side down on the left front corner of the glass.3.Press Start Copy Black or Start Copy Color .Scan an originalFor original documents or images placed on the glass, you can start a scan from your computer or from the HP All-in-One. To use the scan features, the HP All-in-One and computer must be connected and turned on. The HP Photosmart Software must also be installed and running on your computer prior to scanning.To scan to a computer 1.Place your original with the side you want to copy or scan face down on the left frontcorner of the glass.TIP:For quality copies, ensure that the scanner glass is clean and that there are no foreign materials adhering to it.2.Press Scan .If the original is a photo, a preview image of the scan appears on your computer,where you can edit it. Any edits that you make apply to the current scan session only.3.Make any edits to the preview image, and then click Accept when you are finished.Chapter 16HP All-in-One overview2Troubleshooting and supportThis chapter contains troubleshooting information for installation and configuration issues and some operational topics. For more troubleshooting information, see the onscreen Help.Many issues are caused when the HP All-in-One is connected to the computer using a USB cable before the HP All-in-One software is installed on the computer. If you connected the HP All-in-One to your computer before the software installation screen prompts you to do so, you must follow these steps:Troubleshooting common setup issues1.Disconnect the USB cable from the computer.2.Uninstall the software (if you have already installed it).3.Restart your computer.4.Turn off the HP All-in-One, wait one minute, then restart it.5.Reinstall the HP All-in-One software.CAUTION:Do not connect the USB cable to the computer until prompted by the software installation screen.For support contact information, see the inside back cover of this guide.Uninstall and reinstall the softwareIf your installation is incomplete, or if you connected the USB cable to the computer before prompted by the software installation screen, you might need to uninstall and then reinstall the software. Do not simply delete the HP All-in-One application files from your computer. Make sure to remove them properly using the uninstall utility provided when you installed the software that came with the HP All-in-One.To uninstall from a Windows computer and then reinstall1.On the Windows taskbar, click Start , and then click Control Panel .2.Double-click Add/Remove Programs .3.Select HP Deskjet All-In-One Driver Software , and then click Change/Remove .Follow the onscreen instructions.4.Disconnect the HP All-in-One from your computer.5.Restart your computer.NOTE:It is important that you disconnect the HP All-in-One before restarting your computer. Do not connect the HP All-in-One to your computer until after you have reinstalled the software.6.Insert the HP All-in-One CD-ROM into your computer’s CD-ROM drive and then start the Setup program.7.Follow the onscreen instructions and the instructions provided in the Setup Guide that came with the HP All-in-One.When the software installation is complete, the HP Digital Imaging Monitor icon appears in the Windows system tray.To verify that the software is properly installed, double-click the HP Solution Center icon on the desktop. If the HP Solution Center shows the essential icons (Scan Picture and Scan Document ), the software has been properly installed.To uninstall from a Mac and then reinstall1.Disconnect the HP All-in-One from your Mac.2.Open the Applications :Hewlett-Packard folder.Troubleshooting and support 7T r o u b l e s h o o t i n g a n d s u p p o r tI connected the USB cable, but I am having problems using the HP All-in-One with my computerSolution:You must first install the software that came with the HP All-in-One beforeconnecting the USB cable. During installation, do not plug in the USB cable until prompted by the onscreen instructions. Connecting the USB cable before prompted can cause errors.Once you have installed the software, connecting your computer to the HP All-in-One with a USB cable is straightforward. Simply plug one end of the USB cable into the back of your computer and the other into the back of the HP All-in-One. You can connect to any USB port onthe back of your computer.For more information on installing the software and connecting the USB cable, see the Setup Guide that came with the HP All-in-One.The HP All-in-One does not printSolution:If the HP All-in-One and computer are not communicating with each other, try the following:•Look at the On light located on the front of the HP All-in-One. If it is not lit, the HP All-in-One is turned off. Make sure the power cord is firmly connected to the HP All-in-One and plugged into a power outlet. Press the On button to turn on the HP All-in-One.•Make sure the print cartridges are installed.•Make sure you have paper loaded in the input tray.•Check that the HP All-in-One does not have a paper jam.•Check that the print carriage is not jammed. Open the print cartridge door to access the print carriage area. Remove any objects that are blocking the print carriage, including any packing materials. Turn the HP All-in-One off and then turn it on again.•Check that the HP All-in-One print queue is not paused or offline (Windows) or stopped (Mac). If it is, choose the appropriate setting to resume printing. For more information about accessing the print queue, see the documentation that came with the operating system installed on your computer.•Check the USB cable. If you are using an older cable, it might not be working properly. Try connecting it to another product to see if the USB cable works. If you experience problems, the USB cable might need to be replaced. Also verify that the cable does not exceed 3 meters (9.8 feet) in length.•Check the connection from the HP All-in-One to your computer. Verify that the USB cable is securely plugged into the USB port on the back of the HP All-in-One. Make sure the other end of the USB cable is plugged into a USB port on your computer. After the cable is connected properly, turn the HP All-in-One off and then on again.Hardware setup troubleshooting9T r o u b l e s h o o t i n g a n d s u p p o r tChapter 2•If you are connecting the HP All-in-One through a USB hub, make sure the hub is turned on. If the hub is on, try connecting directly to your computer.•Check other printers or scanners. You might need to disconnect older products from your computer.•Try connecting the USB cable to another USB port on your computer. After you check the connections, try restarting your computer. Turn the HP All-in-One off and then on again.•If the HP All-in-One is offline, turn the HP All-in-One off and on again. Start a print job.•If necessary, remove and then install the software you installed with the HP All-in-One again.For more information on setting up the HP All-in-One and connecting it to your computer, seethe Setup Guide that came with the HP All-in-One.Clear paper jamsFor more information about clearing a paper jam, see the onscreen Help.Print cartridge troubleshootingIf you are experiencing problems with printing, you might have a problem with one of the printcartridges.To troubleshoot print cartridges1.Remove the black print cartridge from the slot on the right. Do not touch the ink nozzles or thecopper-colored contacts. Check for possible damage to the copper-colored contacts or inknozzles.Make sure the plastic tape has been removed. If it is still covering the ink nozzles, gently removethe plastic tape by using the pink pull tab.2.Reinsert the print cartridge by sliding it forward into the slot. Then push the print cartridge forwarduntil it clicks into the socket.3.Repeat steps 1 and 2 for the tri-color print cartridge on the left side.4.If the problem persists, you may need to print a self-test report or clean the print cartridges. Formore information, see the onscreen Help.Find more informationA variety of resources, both printed and onscreen, provide information about setting up and usingthe HP All-in-One.Setup GuideThe Setup Guide provides instructions for setting up your HP All-in-One and installing software.Make sure you follow the steps in the Setup Guide in order.If you have problems during setup, see Troubleshooting in the last section of the Setup Guide, orsee “Troubleshooting and support” on page 7 in this guide.10Troubleshooting and supportOnscreen HelpThe onscreen Help provides detailed instructions on features of your HP All-in-One that are notdescribed in this guide, including features that are only available using the software you installedwith your HP All-in-One.To access the HP Photosmart Software Help on a Windows computer1.In the HP Solution Center, click the tab for the HP All-in-One.2.In the Device Support area, click Onscreen Guide or Troubleshooting.HP Web siteIf you have Internet access, you can get help and support from the HP Web site at /support. This Web site offers technical support, drivers, supplies, and ordering information.Ink usageInk from the cartridges is used in the printing process in a number of different ways, including in theinitialization process, which prepares the device and cartridges for printing, and in printheadservicing, which keeps print nozzles clear and ink flowing smoothly. In addition, some residual inkis left in the cartridge after it is used. For more information, see /go/inkusage.HP supportYou can contact HP Support by phone and online. Support options and availability vary by product,country/region, and language.HP support by phoneFor a list of support phone numbers, see the inside front cover of this guide.Support options and availability vary by product, country/region, and language.Phone support periodOne year of phone support is available in Asia Pacific and Latin America (including Mexico). Todetermine the duration of phone support in North America, Eastern Europe, the Middle East, andAfrica, go to /support.Standard phone company charges apply.After the phone support periodAfter the phone support period, help is available from HP at an additional cost.Contact your HP dealer or call the support phone number for your country/region to learn more aboutsupport options.Before calling HP Support1.Make sure that:a.The HP All-in-One is plugged in and turned on.b.The specified print cartridges are installed correctly.c.The recommended paper is properly loaded in the input tray.2.Reset the HP All-in-One:a.Turn off the HP All-in-One by pressing the On button.b.Unplug the power cord from the back of the HP All-in-One.c.Plug the power cord back into the HP All-in-One.d.Turn on the HP All-in-One by pressing the On button.3.Have the following information available:a.Specific name of the HP All-in-One, as it appears on the control panel.b.Print a self-test report. (For more information, see the User Guide.)c.Be prepared to describe your problem in detail.d.Have your serial number and service ID ready, found on the self-test report.e.Be near the HP All-in-One printer when you call HP Support.HP support113Technical informationThe technical specifications and international regulatory information for the HP All-in-One areprovided in this section.System requirementsSoftware system requirements are located in the Readme file.Paper specifications•Input tray capacity: Plain paper sheets: Up to 100 (20 lb. paper)•Output tray capacity: Plain paper sheets: Up to 50 (20 lb. paper)NOTE:For a complete list of supported media sizes, see the printer software. For a completelist of paper weights, see the onscreen Help.Physical specifications•Height: 16.97 cm (6.68 inches)•Width: 42.57 cm (16.76 inches)•Depth: 25.97 cm (10.22 inches)•Weight: 4.045 kg (8.92 pounds)Power specifications•Power consumption: 20 watts (average printing)•Input voltage: AC 100 to 240 V ~ 1 A 50–60 Hz•Output voltage: DC 32 V===375 mA, 16 V===500mA•Power supply: 0957-2231, AC 100 to 240 V ~ 1 A 50–60 HzNOTE:Use only with the power adapter supplied by HP.Environmental specifications•Recommended operating temperature range: 15º to 30º C (59º to 86º F)•Allowable operating temperature range: 10º to 35º C (50º to 95º F)•Humidity: 15% to 80% RH non-condensing•Non-operating (Storage) temperature range: –20º to 50º C (–4º to 122º F)•In the presence of high electromagnetic fields, it is possible the output from the HP All-in-One may be slightly distorted•HP recommends using a USB cable less than or equal to 3 m (10 feet) in length to minimize injected noise due to potential high electromagnetic fieldsRegulatory noticesThe HP All-in-One meets product requirements from regulatory agencies in your country/region. Fora complete listing of regulatory notices, see the onscreen Help.Regulatory model identification numberFor regulatory identification purposes, your product is assigned a Regulatory Model Number. TheRegulatory Model Number for your product is VCVRA-0706. This regulatory number should not beconfused with the marketing name (HP Deskjet F2100 All-in-One series, etc.) or product numbers(CB595A, etc.).12Technical informationWarrantyWarranty13T e c h n i c a l i n f o r m a t i o nChapter 314Technical information。
惠普 LaserJet 3050 3052 3055 3390 3392 多功能一体机 说明书
HP LaserJet 3050/3052/3055/3390/3392 all-in-one (HP LaserJet 3050/3052/3055/3390/ 3392 多功能一体机)用户指南版权与许可© 2006 版权所有 Hewlett-Packard Development Company, LP未经事先书面许可，严禁进行任何形式的复制、改编或翻译，除非版权法另有规定。
此处包含的信息如有更改，恕不另行通知。
HP 产品和服务的所有保修事项已在产品和服务所附带的保修声明中列出，此处内容不代表任何额外保修。
HP 公司对此处任何技术性或编辑性的错误或遗漏概不负责。
产品号 Q6500-90939Edition 1, 4/2006商标声明Adobe Photoshop® 和 PostScript® 是Adobe Systems Incorporated 的商标。
Corel® 是 Corel Corporation 或 Corel Corporation Limited 的商标或注册商标。
Linux 是 Linus Torvalds 在美国的注册商标。
Microsoft®、Windows®、Windows NT® 和Windows® XP 是 Microsoft Corporation 在美国的注册商标。
UNIX® 是 Open Group 的注册商标。
ENERGY STAR® 和 ENERGY STAR 徽标®是美国环保署在美国的注册标记。
目录1 多功能一体机基本信息多功能一体机配置 (2)HP LaserJet 3050 all-in-one (HP LaserJet 3050 多功能一体机) (2)HP LaserJet 3052/3055 all-in-one (HP LaserJet 3052/3055 多功能一体机) (3)HP LaserJet 3390/3392 all-in-one (HP LaserJet 3390/3392 多功能一体机) (4)多功能一体机功能 (5)多功能一体机部件 (7)HP LaserJet 3050 all-in-one (HP LaserJet 3050 多功能一体机) 部件 (7)正视图 (7)后视图 (7)接口 (8)控制面板 (8)HP LaserJet 3052/3055 all-in-one (HP LaserJet 3052/3055 多功能一体机) 部件 (9)正视图 (9)后视图 (9)接口 (10)控制面板 (10)HP LaserJet 3390/3392 all-in-one (HP LaserJet 3390/3392 多功能一体机) 部件 (11)正视图 (11)后视图 (11)接口 (12)控制面板 (12)2 软件软件安装 (14)典型安装 (14)最小安装 (14)打印机驱动程序 (15)支持的打印机驱动程序 (15)附加驱动程序 (15)选择正确的打印机驱动程序 (15)打印机驱动程序帮助 (Windows) (16)访问打印机驱动程序 (17)其它还有哪些软件可用？ (17)Windows 软件 (18)用于 Windows 的软件组件 (18)HP ToolboxFX (18)嵌入式 Web 服务器 (EWS) (18)使用“添加或删除程序”卸载 (18)ZHCN iiiMacintosh 软件 (19)HP Director (HP 控制器) (19)Macintosh Configure Device (Macintosh 配置设备)（Mac OS X V10.3 与Mac OS X V10.4） (19)PDE（Mac OS X V10.3 与 Mac OS X V10.4） (20)安装 Macintosh 软件 (20)安装适用于直接连接 (USB) 的 Macintosh 打印系统软件 (20)安装用于网络的 Macintosh 打印系统软件 (20)从 Macintosh 操作系统中删除软件 (21)3 介质规格一般准则 (24)选择纸张和其它介质 (24)HP 介质 (24)避免使用的介质 (25)可能损坏多功能一体机的介质 (25)介质使用准则 (26)纸张 (26)标签 (26)标签结构 (27)投影胶片 (27)信封 (28)信封结构 (28)双面接缝信封 (28)带不干胶封条或封舌的信封 (29)信封存放 (29)卡片纸和重磅介质 (29)卡片纸结构 (29)卡片纸准则 (29)信头纸和预打印表单 (30)支持的介质重量和尺寸 (31)打印和存放环境 (34)4 使用多功能一体机将介质装入进纸盘 (36)装入要传真、复印或扫描的文档 (36)将纸张装入进纸盘，HP LaserJet 3050/3052/3055 all-in-one (HP LaserJet 3050/3052/3055 多功能一体机) (37)优先进纸槽 (37)250 张进纸盘（纸盘 1） (38)将纸张装入进纸盘，HP LaserJet 3390/3392 all-in-one (HP LaserJet 3390/3392 多功能一体机) (39)单张优先进纸槽（纸盘 1） (39)250 张进纸盘（纸盘 2 或可选纸盘 3） (39)控制打印作业 (40)打印设置优先级 (40)选择来源 (40)选择类型或尺寸 (40)使用多功能一体机控制面板 (41)iv ZHCN更改多功能一体机控制面板显示语言 (41)更改默认介质尺寸和类型 (41)更改默认介质尺寸 (41)更改默认介质类型 (42)更改默认纸盘配置 (42)使用多功能一体机音量控制键 (42)更改警报音量 (43)更改传真音量 (43)更改传真响铃音量 (44)更改多功能一体机控制面板按键音量。
HP 6830 无线多功能一体机用户手册说明书
8 Close the ink tank cover.9 P ress the power button to turn on the product, thenwait for the power and the ink lights to stay on. TheWi-Fi lights flash alternately.10 P ress and hold the stop button for 5 seconds until thepower light starts to flash and ink charging begins. Ink charging takes about 11 minutes.N ote: When the power light stops flashing, ink charging iscomplete. Once initial setup of the printer is complete, you cantop off the ink tanks with any remaining ink. See the online User’s Guidefor instructions.C aution: Do not unplug or turn off the product, or open the frontcover while the product is charging or you’ll waste ink.Note:Caution:online User’s Guide for refilling instructions.C hoose a setup methodThe Epson Smart Panel® app can help you set up your printerthrough an interactive, step-by-step process using yoursmartphone or tablet.If you do not want touse a mobile device forsetup, skip to the “Fill inktanks” section below.To use your mobile devicefor setup, continue tostep 1.OR1 D ownload the Epson Smart Panel appfrom your device’s app store. Do notlaunch the app yet.2 P ress the power button to turn on the product.Note: Do not connect your product to your computer yet.3 L aunch the app and follow the instructions to set up yourproduct. If necessary, tap the + icon on the top right cornerof the app’s home screen, tap Start setting up, and followthe instructions to set up your product.For information on connecting your product to a computer,using voice-activated printing, solving problems, or for detailson reaching Epson support, see the sections on the back of thissheet.F ill ink tanksWarning: Keep the ink bottles out of the reach of children and do notdrink the ink.Caution: This product requires careful handling of ink. If ink spills, wipeit off immediately with a damp towel to avoid permanent stains. If ink getson your clothes or belongings, it may not come off.Note:• E pson cannot guarantee the quality or reliability of third-party ink.• U se the ink bottles included with the printer to set up the product. Partof the ink will be used to charge the print head. These bottles may printfewer pages compared with replacement ink bottles.• E pson strongly recommends the use of genuine ink to ensure optimalprint quality and performance.1 Ofor the black (BK) inktank.Note: Refer to thecolor-coded stickeron the ink tank unit to5Pull out the output tray, then raise the paper stopper.Note: To check print quality, turn the printer off, then hold down the stop button while turning on the printer. If the printed patterns are missing segments, clean the print head by holding the stop button for5 seconds, then print another nozzle check.I nstall softwareNote:• A n Internet connection is required to obtain the product software.• T o print from a Chromebook™, go to/support/chromebookprint (U.S.) orhttp://epson.ca/support/chromebookprint (Canada) for instructions.1 M ake sure the product is NOT CONNECTED to yourcomputer.W indows ®: If you see a Found New Hardware screen, click Canceland disconnect the USB cable.2 D ownload and run your product’s software package. For thelatest software, visit:/support/et2400 (U.S.)http://epson.ca/support/et2400 (Canada)3 F ollow the instructions on the computer screen to run thesetup program.4 W hen you see the Select Your Connection screen, selectone of the following and follow the on-screen instructions:•Wireless connectionIn most cases, the software installer automaticallyattempts to set up your wireless connection. If setup is unsuccessful, you may need to enter your network name (SSID) and password.•Direct USB connectionM ake sure you have a USB cable (not included).EPSON and Epson Smart Panel are registered trademarks, EPSON Exceed Your Vision is a registered logomark, and Epson Connect is a trademark of Seiko Epson Corporation.Designed for Excellence is a trademark of Epson America, Inc.Windows is a registered trademark of Microsoft Corporation in the United States and/or other countries.Mac is a trademark of Apple Inc., registered in the U.S. and other countries.Android, Chromebook, and Google Play are trademarks of Google LLC.General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners. Epson disclaims any and all rights in those marks.This information is subject to change withut notice.© 2022 Epson America, Inc., 2/22Printed in XXXXXXCPD-62151L oad paperSee the online User’s Guide for information about loading capacity, available paper types and sizes, and loading envelopes.1 M ake sure the product is done charging the ink. Then flipthe feeder guard forward, raise the paper support, and tiltit backwards slightly.2 Slide the edge guides all the way out.3 Lshort edge first, in the middle of the rear paper feeder.4 S lide the edge guides against the paper, but not tootightly.Mobile and voice-activated printing• Print directly from your Android™ (v4.4 or later) device*.Simply connect your printer and device to the same network and tap the menu icon to select the print option.• Turn your mobile device into an intuitive, easy-to-use printingand scanning control center with Epson Smart Panel. Download the app from your mobile device’s app store.• Print remotely with Epson Connect™. See your onlineUser’s Guide for instructions or learn more at /connect (U.S.) or http://epson.ca/connect (Canada).• Use voice-activated assistants to print a variety of creative andeveryday items from your Epson ® product. Simply add your product to an Epson Connect account, then link the account to a voice-activated assistant. See /voice (U.S.) or http://epson.ca/voice (Canada) for more information.* M ay require the Epson Print Enabler or Mopria Print Service app from Google Play™.Any problems?Network setup was unsuccessful.• Make sure you select the right network name (SSID).• Restart your router (turn it off and then on), then try to connectto it again.• The printer can only connect to a network that supports2.4 GHz connections. If your router offers both 2.4 GHz and 5 GHz connections, make sure 2.4 GHz is enabled.• If you see a firewall alert message, click Unblock or Allow to let setup continue.• Print a network connection report to identify network problemsand solutions. See your online User’s Guide for instructions.There are lines or incorrect colors in my printouts.Run a nozzle check to see if there are gaps in the printout. Then clean the print head, if necessary. See the online User’s Guide for more information.Setup is unable to find my product after connecting itwith a USB cable.Make sure the product is on and the USB cable is securely connected.Any questions?User’s GuideWindows: Click the icon on your desktop or Apps screen to access the online User’s Guide .Mac: Click the icon in Applications/Epson Software/Guide to access the online User’s Guide .If you don’t have a User’s Guide icon, go to the Epson website, as described in “Technical support.”VideosVisit /support/et2400videos (U.S.) orhttp://epson.ca/support/et2400videos (Canada) to view support videos (videos available only in English).Technical supportVisit /support/et2400 (U.S.) orhttp://epson.ca/support/et2400 (Canada) to download drivers, view manuals, get FAQs, or contact Epson.Call (562) 276-4382 (U.S.) or (905) 709-3839 (Canada), 7 am to 4 pm , Pacific Time, Monday through Friday. Days and hours of support are subject to change without notice. Toll or long distance charges may apply.RecyclingEpson offers a recycling program for end-of-life hardware and ink bottles. Please go to /recycle (U.S.) or http://epson.ca/recycle (Canada) for information on how to return your products for proper disposal.Need paper and ink?Ensure brilliant results with Epson specialty and plain papers, engineered specifically for Epson printers. Find Epson papers and Epson Genuine Ink at (U.S. sales) or http://epson.ca (Canadian sales) and at Epson authorized resellers. Call 800-GO-EPSON (800-463-7766).ET-2400 replacement inks。
hp deskjet ink advantage ultra 4800系列 用户指南说明书
彩页配备超低成本墨盒、且操作便捷2、支持无线打印功能。
1惠普 DeskJet Ink Advantage Ultra 4800 系列操作简单便捷，且墨盒成本超低，可满足您的打印基本需求。
打印、扫描、复印和无线打印功能， 一应俱全。
1 通过惠普 Smart app，您可在任意设备上轻松设置并操作打印。
2简单设置，轻松打印。
• 惠普 Smart app，简单快速指导您完成每一步设置，助您轻松快速完成设置。
2• 轻松管理打印任务，一台设备即可完成打印、扫描和复印工作。
• 使用惠普 Smart app，可以轻松打印您智能手机上的日常文档。
2• 借助惠普 Smart app，可在智能手机上进行高质量扫描、分享、复印工作。
2白色灰色靛蓝色赤褐色 浅绿色无线打印1• 配备具有自我连接功能的双频 Wi-Fi ®，获得范围更广、速度更快更稳定的无线连接。
1• 智能手机或平板电脑通过蓝牙快速对接打印机®，简单设置即可快速实现打印。
3• 使用内置的无线网络功能便可轻松实现访问、打印、共享云端资源。
1• 借助内置的 USB 端口，便可轻松将打印机连接到您的电脑，即刻开启打印。
5可打印多达 1,300 张黑白页和 700 张彩色页6• 开箱即可获得数千张印量。
可打印多达 1,300 张黑白页和 700 张彩色页。
6• 使用原装惠普墨盒打印文档和照片，文字清晰，图片色彩鲜丽。
脚注1无线操作仅适用于 2.4 GHz 和 5.0 GHz 设备。
更多信息请访问 /go/mobileprinting。
Wi-Fi 为 Wi-Fi Alliance ® 的注册商标。
支持 5.0 GHz 频段（最高 150 mbps）与 2.4 GHz 频段（最高 72.2 mbps）的设备比较，同时支持 5.0 GHz 和 2.4 GHz，最多可使用 12 个非重叠的频道；而仅支持 2.4 GHz 的设备，只能使用 3 个非重叠的频道。
HP CM4730系列 彩色数码多功能一体机 说明书
@1工作效率再创新高。
HP Color LaserJet CM4730系列彩色数码多功能一体机稳定可靠，集打印、复印、扫描和传真功能于一身，经济高效、简单易用，让每个工作组都能从中获益。
局域网(LAN)IT部门输出基础设施架构管理解决方案一款适用于所有惠普(HP)网络设备的智能驱动程序•惠普(HP)通用打印驱动程序－业界领先远程管理•嵌入式Web服务器•HP Web Jetadmin－业界领先作业统计*•MegaTrack•EasyReport智能打印技术监控打印机状态并自动发送“耗材不足”报警彩色和黑白打印和复印速度为31页/分钟传真速度为33.6 kbps&HP Digital Sending软件*•发送到FTP•局域网传真•互联网传真•Windows®2000/XP传真文档捕获解决方案嵌入式硬盘40GB文档管理系统发送到网络文件夹HP Color LaserJet CM4730系列彩色数码多功能一体机发送到电子邮件安全性解决方案安全性•SecureJet*局域网(LAN) 1600页输入容量惠普(HP)服务^基本服务支持服务面向各种规模的企业高级智能打印服务可配置且可扩展的标准化服务，预先按月支付高级服务可控的打印服务可完全定制、全面的可扩展系列服务，可优化您的成像和打印环境*可选的软件。
简明易用的控制面板屡获殊荣的HP Easy Select 控制面板，为您提供轻松的打印作业指导。
该控制面板包括1个独特的图形显示触摸屏(具有对比度调整功能)、1个数字小键盘、3个发光二极管(LED)指示灯，以及1个睡眠模式按键/进入睡眠模式指示灯。
打印作业－节省宝贵时间打印和复印legal 尺寸的黑白和彩色文档时，速度为31页/分钟，为您节省宝贵时间。
此外，这款彩色数码多功能一体机还具备快捷高效的传真功能，以及扫描到电子邮件和文件夹功能，是具有多个工作流程和要求苛刻的工作组的理想之选。
& 它外形小巧，可随意放置在办公室内的任何位置。
HP Deskjet F2200 多功能一体机安装指南说明书
4d.Paper trayPrint cartridge doorTray extensionLoad plain white paper.d.Close the print cartridge door.a.Make sure the paper tray is open.b.Pull out the tray extension and make sure thepaper-width guide is in its outermost position.CAUTION: Do not force paper too far into the tray.纸盒墨盒门纸盒延长板 放入普通白纸。
d. 关闭墨盒门。
a. 确保纸盒处于打开状态。
b. 拉出纸盒延长板，确保纸张宽度导轨处在最外面的位置。
警告：将纸张放入纸盒时，不可过于用力向内挤压。
용지함용지함 확장대 일반 용지를 넣습니다.d. 잉크 카트리지 덮개를 닫습니다.a. 용지함이 열려 있는지 확인하십시오.b. 용지함 확장대를 빼내고 용지 너비 고정대가가장 맨 끝에 있는지 확인하십시오.주의: 용지함에 용지를 너무 깊숙이 밀어 넣지 마십시오. 關閉列印墨匣門。
a.紙匣紙匣延伸架 放入一般白紙。
d. 拉出紙匣延伸架，確保紙張寬度導板位於最外側。
確定紙匣已開啟。
b.注意：將紙張放入紙匣時，不要過於往里塞。
5Open the print cartridge door. Wait until the print carriage moves to the center of the product.Note: If the carriage does not move, unplug the product. Remove all tape and packing material, see step 1. Reconnect the power cord and turn on the product.打开墨盒门。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
An FCC-compliant telephone cord and modular plug is provided with this equipment. This equipment is designed to be connected to the telephone network or premises wiring using a compatible modular jack which is Part 68 compliant. This equipment cannot be used on telephone company-provided coin service. Connection to Party Line Service is subject to state tariffs. If this equipment causes harm to the telephone network, the telephone company will notify you in advance that temporary discontinuance of service may be required. If advance notice is not practical, the telephone company will notify the customer as soon as possible. Also, you will be advised of your right to file a complaint with the FCC if you believe it is necessary. The telephone company may make changes in its facilities, equipment, operations, or procedures that could affect the operation of the equipment. If this happens, the telephone company will provide advance notice in order for you to make the necessary modifications in order to maintain uninterrupted service. If trouble is experienced with this equipment,
版权信息 © 2006 版 权 所 有 Hewlett-Packard Development Company, L.P. 未经事先书面许可，严禁进行任何形式的复制、改编或翻 译，除非版权法另有规定。 此处包含的信息如有更改，恕不另行通知。 HP 产品和服务的所有保修事项已在产品和服务所附带的保 修声明中列出，此处内容不代遗漏概不负责。 Edition 1, 4/2006
Edition 1, 4/2006
Q6502-90908
FCC Regulations
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy. If this equipment is not installed and used in accordance with the instructions, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
The information contained in this document is subject to change without notice.
The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.
please see the numbers in the front of this manual for repair and (or) warranty information. If the trouble is causing harm to the telephone network, the telephone company may request you remove the equipment from the network until the problem is resolved. The following repairs can be done by the customer: Replace any original equipment that came with the device. This includes the print cartridge, the supports for trays and bins, the power cord, and the telephone cord. It is recommended that the customer install an AC surge arrestor in the AC outlet to which this device is connected. This is to avoid damage to the equipment caused by local lightning strikes and other electrical surges. See the electronic User Guide for more regulatory information. Trademark Credits Microsoft®, Windows®, is a U.S. registered trademark of Microsoft Corporation. All other devices mentioned herein may be trademarks of their respective companies.
HP LaserJet 3052/3055
Copyright Information
© 2006 Copyright Hewlett-Packard Development Company, L.P.
Reproduction, adaptation or translation without prior written permission is prohibited, except as allowed under the copyright laws.
Consult your dealer or an experienced radio/TV technician.
Any changes or modifications to the printer that are not expressly approved by HP could void the user's authority to operate this equipment.
Reorient or relocate the receiving antenna.
Increase separation between equipment and receiver.
Connect equipment to an outlet on a circuit different from that to which the receiver is located.
Use of a shielded interface cable is required to comply with the Class B limits of Part 15 of FCC rules.
This equipment complies with FCC rules, Part 68. On the back of this equipment is a label that contains, among other information, the FCC registration number and ringer equivalence number (REN) for this equipment. If requested, this information must be provided to the telephone company. The REN is used to determine the quantity of devices which may be connected to the telephone line. Excessive RENs on the telephone line may result in the devices not ringing in response to an incoming call. In most, but not all, areas, the sum of the RENs should not exceed five (5.0). To be certain of the number of devices that may be connected to the line, as determined by the total RENs, contact the telephone company to determine the maximum REN for the calling area.