微孔雾化片ATC16-0110SWA规格书(图)
TXC SMD 缝合玻璃晶体型号 AM16000301 产品规格说明书
CN:(Singnature)(Date)(1) TXC requires one copy returned with signature and title of authorized individual that signifies acceptanceof the attached specifications.(2) Orders received and accepted by TXC after return of signed copy of specification will be produced perthese specifications.(3) Any changes to these specifications must be agreed upon by both parties and new revision of theProduct Specification Sheet will be issued.(4) Any issuance of purchase order prior to consigning back the Approval page of "Specification Sheets"from customers will be regarded as the agreement on the contents of these specifications.MSL:Level 1(for glass crystal only ：Pb used with sealing glass material is exempt from EU directive)TXC CORPORATIONSPECIFICATION FOR APPROVALCUSTOMER :PRODUCT TYPE :SMD SEAM SEALING X'TAL 3.2×2.5NOMINAL FREQ.:16.000000MHz TXC P/N:AM16000301REVISION :A1CUSTOMER P/N :PM / SALES :DATECUSTOMERCONFIRMATION：:RoHS CompliantCN:NOTE:(1)(2)Revision "Sx" is for engineering samples only. PE/RD's approval required.(3)Revision "Ax" is production ready. PE, QA and MFG's approval required.MSL:Level 1(for glass crystal only ：Pb used with sealing glass material is exempt from EU directive)PE/RD QA 16.000000MHz AM16000301TXC P/N:NOMINAL FREQ.SMD SEAM SEALING X'TAL 3.2×2.5 RoHS CompliantREVISION :A14-Sep-174-Sep-17Wen yuan Chang4-Sep-17ZhongLin WuZhi jun Wu:PRODUCT TYPE TXC CORPORATIONPRODUCT SPECIFICATION SHEETTXC green product standard is based on the international standards. Relevant informationis posted on the TXC website and updated regularly. The documentation is subject to the latest green product quality system.MFG:REVISION ：PAGE ：1Xiaohua ZhangTXC CORPORATIONAM16000301ReviserInitial released 19-Apr-16N/A Xiaoyan Jiang S1N/A A1RevRevise pageTXC P/N ：Revise contentsDateRef.No.S Turn AN/AA14-Sep-17N/AREVISION ：PAGE ：2P.79RELIABILITY SPECIFICATIONS P.8P.46STRUCTURE ILLUSTRATION P.57EMBOSS CARRIER TAPE & REEL P.6SUGGESTED REFLOW PROFILE & MANUAL SOLDER CONDITION MARKING P.44FACTORY LOCATION P.4No.ContentPage1TXC CORPORATIONTXC P/N ：AM16000301A1ELECTRICAL SPECIFICATIONS P.3Spec Sheet ContentsDIMENSIONS 8PACKING 52P.43REVISION ：PAGE ：3■ ELECTRICAL SPECIFICATIONSStandard conditionsAmbient temperature :25±5℃Relative humidity:40%~70%In addition to special specifications, are measured in the standard environment.Ambient temperature :25±3℃Relative humidity:40%~70%If there is any doubt about the result, it is necessary to make measurements in the standard environment.Measure equipmentElectrical characteristics measured by S&A 250B or equivalent.Crystal cutting typeThe crystal is using AT CUT (thickness shear mode). Unit Weight: 0.018±0.001 g/pcs1Nominal Frequency 2Oscillation Mode 3Load Capacitance 4Frequency Tolerance 56Operating Temperature 78Drive Level9Effective Resistance Rr 10Shunt Capacitance C011Insulation Resistance 12Storage Temperature Range--40~105℃--500--MΩat DC 100V-Rr --60Ω-Aging -±3ppm 1st Year at 25 ℃ ± 3 ℃DL -100-μW --40~85℃-±20ppm at 25 ℃ ± 3 ℃Frequency Stability -±20ppm Over Operating Temp. Range (Reference 25℃)---Fundamental--CL 9pF -A1ParametersSYM.Electrical Spec.Notes MINTYPE MAXTXC CORPORATIONTXC P/N ：AM16000301FL 16.000000MHz UNITS C0--3pF -REVISION ：PAGE ：4■ DIMENSIONS■ MARKINGTXC LogoFrequency Codeex:MHz =Lot Code Production Control CodeDate CodeMonth Code:MONTHYEAR A B C D E F G H J K L M N P Q R S T U V W X Y Z a b c d e f g h j k l m npqrstuvwxyz*This m onth code will be cycled every four yearsProduction location: Taiwan & China (NGB)■ SUGGESTED REFLOW PROFILEPeak Temperature : 260±5℃, 10 sec. Max.Solder melting point : 220±10 ℃, 60 sec. Min.■ SUGGESTED MANUAL SOLDER CONDITIONTemperature: 350 ± 10 ℃Time: 3 sec.Re-solder times: twiceNOTE: After manual welding, the product shall be measured down to room temperature.20072011201520192023200820122016202020242005200920132017202120062010201420182022JUL AUG SEP OCT NOV JUN DEC■□□□□16.000000160JAN FEB MAR APR MAY TXC CORPORATIONTXC P/N ：AM16000301A1(Unit:mm)T □□□150(℃)260220180120 sec60 sec10 secTime (sec)3.20 ± 0.102.50 ± 0.104132Internal View ConnectionSuggested Layout41321243GNDGND1.401.200.50Bottom View0.80Unit:mm0.70 ± 0.101.201.401.20±0.101.00±0.100.90±0.100.70±0.10REVISION ：PAGE ：5■ STRUCTURE ILLUSTRATIONNO 1LidKovar (Fe/Co/Ni)-2Base(Package)Ceramic (AI 2O 3) + Kovar (Fe/Co/Ni)+ Ag/Cu Color black 3PADAuTungsten metalize + Ni plating + Au plating4Crystal blank SiO 2-5Conductive adhesive Ag Silicon resin6ElectrodeNoble Metal-TXC CORPORATIONTXC P/N ：AM16000301A1COMPONENTSMATERIALSFINISH/SPECIFICATIONS B-B' sectional drawing C-C' sectional drawingA-A' sectional drawingREVISION：PAGE：6■ PACKING(UNIT : mm)REMARK :DIMENSIONSL L1W W1pcs / Reel (UNIT : mm) 178.01.65 3.402.70 4.0011.51.758.00 4.00TXC CORPORATION TXC P/N：AM16000301A1DIMENSIONSFD E GA B C8.0Standard Reel Quantity is 3,000 pcs per reel1.50H13.0ECBDINDEX MARKHFeedingAF GW1LL12.0W160mm min160mm min400mm minLeaderEmpty Sealed Trailer3000pcs ProductsTT TTUser Direction of FeedingREVISION ：PAGE ：7■PACKINGLabel :[STORAGE]1.Do not get wet by the rain.2.The storage environment shall be 5℃ ~40℃ and 30% ~ 75%RH humidity and a void exposure to sunlight.3.If customers have special requirements, we can coordinate.AM16000301TXC P/N ：TXC CORPORATIONA1TapeLabelTapeshipping markCustomer InformationBox Item:1. Reel X 6 (L200 X W200 X H140mm)2. Reel X 12 (L200 X W200 X H250mm)3. Reel X 25 (L400 X W400 X H280mm)4. Reel X 50 (L400 X W400 X H280mm)5. Reel X 100 (L399 X W346 X H360mm)Note:1. For the maximum reel of loads for each type box.2. The number of reels is slightly adjusted according to each factory .REVISION ：PAGE ：8■ RELIABILITY SPECIFICATIONS (AEC-Q200 Compliant)1.Mechanical EnduranceNo.1.1Drop Test 120 cm height, 10 times on Stainless Plate .Device are shocked to half sine wave ( 3000 G ) three mutually perpendicular axes each 3 times. 0.3m sec. duration time Frequency range 10 ~ 2000 Hz~10 Hz Amplitude1.52 mm/10G Sweep time20 minute Perpendicular axes each test time4 Hrs(Total test time 12 Hrs)Temperature 245 ℃ ± 5℃Immersing depth1.25 mm Immersion time 5 ± 1 secondsFluxRosin resin methyl alcohol solvent ( 1 : 4 )1.5Terminal Strength Mount on PCB board and shear strength 1.8kg for 60 sec.1.62.Environmental EnduranceNo.Pre-heat temperature125 ℃Pre-heat time 60 ~ 120 sec.Test temperature 260 ± 5 ℃Test time10 ± 1 sec.2.3Low Temp. Storage- 40 ℃ ± 3 ℃ for all 1000 Hrs.Total 1000 cycles of the following Thermal Shock :Total 1000 cycles of the following temperature cycle : - 40℃ ± 3 to 85℃ ± 3 , Dwell time:15min.2.7Moisture Resistance20 cycles ( +25℃~65℃ , 80%~100% RH) , 24hrs/-STD 202Method 1062.8Operational Life+ 85 ℃ ± 3 ℃ for 1000 Hrs.MIL-STD-202Method 1082.5Temperature CycleJESD 22Method JA-1042.6Biased Humidity+ 85℃ ± 3℃ , RH 85% , 1000 Hrs.MIL-STD-202Method 1032.2High Temp. Storage + 85 ℃ ± 3 ℃ for all 1000 -STD-202Method 108JIS C 67012.4Thermal ShockMIL-STD-202Method 107Test ItemTest MethodsREF. DOC 2.1Resistance To Soldering HeatMIL-STD 202Method 2101.4Solderability J-STD-002AEC-Q200-006Board FlexDuration Time: 60 sec, Deviation: 3mmAEC-Q200-005REF.DOC JIS C 67011.2Mechanical ShockMIL-STD-202Method 2131.3Vibration MIL-STD-202Method 204TXC CORPORATIONTXC P/N ：AM16000301A1Test Item Test Methods105 ± 3℃25℃ 5 min. 5 min.20 sec. max.1 cycle-55 ± 3℃。
Tet-On 3G Вector Set (with ZsGreen1) 商品说明书
Certificate of Analysis Takara Bio USA, Inc.1290 Terra Bella Avenue, Mountain View, CA 94043, USA U.S. Technical Support: ********************United States/Canada 800.662.2566 Asia Pacific+1.650.919.7300Europe+33.(0)1.3904.6880Japan+81.(0)77.565.6999Page 1 of 6Tet-On® 3G Vector Set (with ZsGreen1)Table of ContentsDescription (1)pCMV-Tet3G Vector Information (2)pTRE3G-ZsGreen1 Vector and pTRE3G-Luc Control Vector Information (4)Quality Control Data (6)Catalog No. Lot Number631159 (Not sold separately) Specified on product label.DescriptionThe Tet-On 3G Vector Set (with ZsGreen1) is used to create tightly regulated and highly responsive tetracycline (Tet)-inducible mammalian expression systems that are turned on by the addition of doxycycline to the culture medium. The Tet-On 3G Vector Set (with ZsGreen1) allows the simultaneous expression of a gene of interest and a green fluorescent protein marker.Package Contents•20 μl pCMV-Tet3G Vector (500 ng/μl)•20 μl pTRE3G-ZsGreen1 Vector(500 ng/μl)•20 μl pTRE3G-Luc Control Vector(500 ng/μl)•40 μl Linear Hygromycin Marker (50 ng/μl)•40 μl Linear Puromycin Marker (50 ng/μl)Storage Conditions•Store plasmids at –20°C.•Spin briefly to recover contents.•Avoid repeated freeze/thaw cycles.Shelf Life• 1 year from date of receipt under proper storage conditions.Storage Buffer•10 mM Tris-HCl (pH 8.0), 1 mM EDTA (pH 8.0)Shipping Conditions• Dry ice (–70°C)Product DocumentsDocuments for our products are available for download at /manualsThe following documents apply to this product:•Tet-On 3G Expression Systems User Manual (PT5148-1)pCMV-Tet3G Vector InformationFigure 1. pCMV-Tet3G Vector Map.DescriptionThe pCMV-Tet3G Vector expresses Tet-On 3G, a tetracycline-controlled transactivator that exhibits high activity in the presence of the inducer doxycycline (Dox), and exceptionally low activity in its absence. Tet-On 3G results from the fusion of amino acids 1–207 of a mutant Tet repressor (TetR) to 39 amino acids that form three minimal "F"-type transcriptional activation domains from the herpes simplex virus VP16 protein. Tet-On 3G was derived from Tet-On Advanced (Zhou et al. 2006; Urlinger et al. 2000; Gossen and Bujard 1992; Gossen et al. 1995); as a result, it’s fully synthetic, lacks cryptic splice sites, and is codon-optimized for stable expression in mammalian cells. Compared to both of its predecessors, however, this 3rd generation Tet-On transactivator demonstrates increased sensitivity to Dox (Zhou et al. 2006). Constitutive expression of Tet-On 3G is driven by the human cytomegalovirus immediately early promoter (P CMV IE).Location of Features in pCMV-Tet3G•P CMV IE(human cytomegalovirus immediate early promoter): 2–688•Tet-On 3G (transactivator gene): 775–1521•SV40 polyA signal: 1536–1991•pUC origin of replication: 2342–2996•Amp r (ampicillin resistance gene; β-lactamase): 3144–4004 (complementary)•SV40 polyA signal: 4275–4809 (complementary)•Kan r/Neo r (kanamycin/neomycin resistance gene): 5417–6211 (complementary)•P SV40 e (SV40 early promoter): 6532–6891 (complementary)Additional InformationpCMV-Tet3G is used to develop stable Tet-On 3G cell lines, which are hosts for Tet-inducible gene expression systems. To create a Tet-inducible expression system, a vector containing a gene of interest under the control of the Tet-inducible TRE3G promoter(P TRE3G) is transfected into a Tet-On 3G cell line. The addition of Dox to the system causes Tet-On 3G to undergo a conformational change that allows it to bind to P TRE3G, activating transcription of the gene of interest in a highly dose-dependent manner. Additional information on TRE-containing vectors, and protocols describing the construction of Tet-On 3G cell lines can be found in the Tet-On 3G Expression Systems User Manual (PT5148-1).Propagation in E. coli•Suitable host strain: Stellar™ Competent Cells•Selectable marker: plasmid confers resistance to ampicillin (100 μg/ml) in E. coli hosts.• E. coli replication origin: pUCpTRE3G-ZsGreen1 Vector and pTRE3G-Luc Control Vector InformationFigure 2. pTRE3G-ZsGreen1 Vector and pTRE3G-Luc Control Vector Maps.Figure 3. pTRE3G-ZsGreen Vector Multiple Cloning Site. The internal start site (ATG) at the IRES2/MCS junction is indicated in bold.DescriptionpTRE3G-ZsGreen1is a Tet-inducible, mammalian expression vector designed to coexpress a gene of interest and the green fluorescent protein ZsGreen1 under the control of the Tet-responsive promoter P TRE3G. This promoter consists of a highly optimized Tet-responsive element (TRE) just upstream of a minimal CMV promoter. P TRE3G exhibits exceptionally low basal activity; it’s induced by the binding of Tet-On 3G but is virtually silent in its absence. The vector is designed to be used as part of our Tet-On 3G Inducible Expression System (Cat. No. 631164).ZsGreen1 is a human codon-optimized variant of the reef coral Zoanthus sp. green fluorescent protein (ZsGreen) that has been engineered for brighter fluorescence (excitation and emission maxima: 493 and 505 nm, respectively; Matz et al. 1999; Haas, Park, and Seed 1996). p TRE3G-ZsGreen allows Dox-inducible coexpression of ZsGreen1 and a gene of interest from a bicistronic mRNA transcript. An encephalomyocarditis virus (EMCV) internal ribosome entry site (IRES2), positioned between ZsGreen1 and the gene of interest, facilitates cap-independent translation of the gene of interest from an internal start site at the IRES2/MCS junction (Jang et al. 1988). This ensures that a high percentage of ZsGreen1-expressing clones also express the gene of interest, allowing ZsGreen1 to be used as an indicator of inducibility and transfection efficiency, as well as a marker for selection by flow cytometry. The vector also contains a pUC origin of replication and an ampicillin resistance gene (Amp r) to allow for propagation and selection in E. coli.The pTRE3G-Luc is a Tet-inducible control vector that expresses firefly luciferase under the control of P TRE3G. When used with standard luciferase detection reagents, this vector can be used as a reporter of induction efficiency (see User Manual for protocol). pTRE3G-Luc is not intended to be used as a cloning vector.Location of Features in pTRE3G-ZsGreen1•P TRE3G (3rd generation Tet-responsive promoter): 7–382•ZsGreen1: 389–1084•IRES2 (encephalomyocarditis virus internal ribosome entry site): 1091–1673•MCS (multiple cloning site): 1686–1721•SV40 polyA signal: 1776–2573•pUC origin of replication: 2838–3481•Amp r (ampicillin resistance gene; β-lactamase): 3629–4489 (complementary)Location of Features in pTRE3G-Luc•P TRE3G (3rd generation Tet-responsive promoter): 7–382•Luciferase: 432–2084•SV40 polyA signal: 2151–2948•pUC origin of replication: 3213–3856•Amp r (ampicillin resistance gene; β-lactamase): 4004–4864 (complementary)Additional InformationpTRE3G-ZsGreen1 is a mammalian expression vector that allows tightly regulated, doxycycline-controlled coexpression of a gene of interest and ZsGreen1. The gene of interest must have both a start and a stop codon. The gene of interest should be cloned in-frame with the start codon at the IRES2/MCS junction (this codon is shown in bold in the MCS sequence in Figure 3, page 3; see the User Manual for details on how to use In-Fusion® to simplify your cloning). Cotransfection of pTRE3G-ZsGreen1 constructs with Linear Hygromycin or Puromycin Markers allows antibiotic selection of stable transfectants. In order to function, the system requires the presence of the Tet-On 3G transactivator protein, supplied by a stable Tet-On 3G cell line created with our Tet-On 3G Inducible Expression System (Cat. No. 631164).Propagation in E. coli•Suitable host strain: Stellar™ Competent Cells•Selectable marker: plasmid confers resistance to ampicillin (100 μg/ml) in E. coli hosts.• E. coli replication origin: pUCExcitation and Emission of pTRE3G-ZsGreen1•Excitation: 493 nm•Emission: 505 nmReferences•Gossen, M. et al. Transcriptional activation by tetracyclines in mammalian cells. Science268, 1766–9 (1995).•Gossen, M. & Bujard, H. Tight control of gene expression in mammalian cells by tetracycline-responsive promoters. Proc. Natl. Acad. Sci. U. S. A.89, 5547–51 (1992).•Haas, J., Park, E. C. & Seed, B. Codon usage limitation in the expression of HIV-1 envelope glycoprotein. Curr.Biol.6, 315–24 (1996).•Jang, S. K. et al. A segment of the 5’ nontranslated region of encephalomyocarditis virus RNA directs internal entry of ribosomes during in vitro translation. J. Virol.62, 2636–43 (1988).•Matz, M. V et al. Fluorescent proteins from nonbioluminescent Anthozoa species. Nat. Biotechnol.17, 969–73 (1999).•Urlinger, S. et al. Exploring the sequence space for tetracycline-dependent transcriptional activators: novel mutations yield expanded range and sensitivity. Proc. Natl. Acad. Sci. U. S. A.97, 7963–8 (2000).•Zhou, X., Vink, M., Klaver, B., Berkhout, B. & Das, A. T. Optimization of the Tet-On system for regulated gene expression through viral evolution. Gene Ther.13, 1382–90 (2006).Quality Control DataPlasmid Identity & Purity•Digestion with the indicated restriction enzymes produced fragments of the indicated sizes on a 0.8% agarose/EtBr gel:Vector Enzyme(s) Fragment(s)pCMV-Tet3G EcoRI 7.1 kbEcoRI & HindIII 1.2 & 5.9 kbpTRE3G-ZsGreen1 XhoI 4.7 kbEcoRV 1.2 & 3.5 kbpTRE3G-Luc XhoI 5.1 kbEcoRI & BamHI 2.1 & 3.0 kbLinear Hygromycin Marker HindIII & XbaI0.5, 0.6 & 1.1 kbLinear Puromycin Marker HindIII & XbaI0.45, 0.6, & 0.75 kb•Vector identity was confirmed by sequencing.•A260/A280: 1.8–2.0Functional Testing of Linear Markers•HEK 293 cells were transfected with 200 ng of either the Linear Hygromycin Marker or the Linear Puromycin Marker. After 5 hr at 37°C, the transfection solution was removed, and the cells were given fresh medium. 48 hr later, the cells were plated in two 10 cm plates. 48 hr after plating, medium containing either hygromycin orpuromycin (depending on the linear marker used to transfect the cells) was added to the plates. After 2–3 weeks, >20 clones were identified.It is certified that this product meets the above specifications, as reviewed and approved by the Quality Department.CATALOG NO.631159NOTICE TO PURCHASER:Our products are to be used for research purposes only. They may not be used for any other purpose, including, but not limited to, use in drugs, in vitro diagnostic purposes, therapeutics, or in humans. Our products may not betransferred to third parties, resold, modified for resale, or used to manufacture commercial products or to provide a service to third parties without prior written approval of Takara Bio USA, Inc.Your use of this product is also subject to compliance with the licensing requirements listed below and described on the product´s web page at . It is your responsibility to review, understand and adhere to any restrictions imposed by these statements.STATEMENT 24The RCFPs (including DsRedExpress, DsRedExpress2, and E2-Crimson) are covered by one or more of thefollowing U.S. Patent Nos. 7,166,444; 7,157,565; 7,217,789; 7,338,784; 7,338,783; 7,537,915; 6,969,597; 7,150,979;7,442,522 and 8,012,682.STATEMENT 72Living Colors Fluorescent Protein Products: Not-For-Profit Entities: Orders may be placed in the normal manner by contacting your local representative or Takara Bio USA, Inc. Customer Service. Any and all uses of this product will be subject to the terms and conditions of the Non-Commercial Use License Agreement (the “Non-Commercial License”), a copy of which can be found below. As a condition of sale of this product to you, and prior to using this product, you must agree to the terms and conditions of the Non-Commercial License. Under the Non-Commercial License, Takara Bio USA, Inc. grants Not-For-Profit Entities a non-exclusive, non-transferable, non-sublicensable and limited license to use this product for internal, non-commercial scientific research use only. Such licensespecifically excludes the right to sell or otherwise transfer this product, its components or derivatives thereof to third parties. No modifications to the product may be made without express written permission from Takara Bio USA, Inc.Any other use of this product requires a different license from Takara Bio USA, Inc. For license information, please ***************************************************************************************.For-Profit Entities wishing to use this product are required to obtain a license from Takara Bio USA, Inc. For license information, please contact a licensing representative by phone at 650.919.7320 or by e-mail at ***********************.STATEMENT 42Use of the Tetracycline controllable expression systems (the "Tet Technology") is covered by a series of patents including U.S. Patent # 7541446, # 8383364, # 9181556 , European patents EP # 1200607, # 1954811, #2352833Academic research institutions are granted an automatic license with the purchase of this product to use the Tet Technology only for internal, academic research purposes, which license specifically excludes the right to sell, or otherwise transfer, the Tet Technology or its component parts to third parties. Notwithstanding the above, academicand not-for profit research institutions whose research using the Tet Technology is sponsored by for profitorganizations, which shall receive ownership to any data and results stemming from the sponsored research, shall need a commercial license agreement from TET Systems in order to use the Tet Technology. In accepting this license, all users acknowledge that the Tet Technology is experimental in nature. TET Systems GmbH & Co. KG makes no warranties, express or implied or of any kind, and hereby disclaims any warranties, representations, or guarantees of any kind as to the Tet Technology, patents, or products. All others are invited to request a license from TET Systems GmbH & Co. KG prior to purchasing these reagents or using them for any purpose. Takara Bio USA, Inc. is required by its licensing agreement to submit a report of all purchasers of the Tet-controllable expression system to TET Systems.For license information, please contact:GSF/CEOTET Systems GmbH & Co. KG,Im Neuenheimer Feld 58269120 Heidelberg GermanyTel: +49 6221 5880400Fax: +49 6221 5880404email:*******************or use the electronic licensing request form via /ip-licensing/licensing/for-profit-research TRADEMARKS:© 2015 Takara Bio Inc. All Rights Reserved.All trademarks are the property of Takara Bio Inc. or its affiliate(s) in the U.S. and/or other countries or their respective owners. Certain trademarks may not be registered in all jurisdictions.。
雾化器说明书摘要
LP-72闭式循环干燥机CMT TC-30 雾化器中文参考手册注：由于译者自身编译水平有限，因此无法保证在编译过程无错误产生，故此参考手册仅供参考，所有参数及检修方法以原版手册为准编译：刘永强雾化器结构示意简图电机电机底座 电机皮带轮 雾化器基板 雾化器保护板 振动传感器 下保护盖板 喷嘴轮下室下轴振箱 温度传感器 雾化器室 下轴承 弹簧 轴承套 料液导流壳 上轴承 上温度传感器 上轴承箱 主轴 保护帽 上贝尔螺母 雾化器皮带主轴皮带轮 转速传感器 进料管衬套 保护帽1） 轴承温度检测轴承温度检测使用PT-100铂电阻作为温度传感器，当轴承温度超过系统预设值时，系统将会发出报警。
注意：当轴承温度在60℃以内时，雾化器运行良好；当轴承温度在80℃以内时，雾化器可以正常运行； 当轴承温度在80-100℃时，应准备停止雾化器； 当轴承温度超过100℃时，必须立即停止雾化器运行。
2） 振动传感器雾化器安装有振动传感器，用于测量由于轴承磨损、雾化器主轴松动及料液旋转喷头不平衡等引起的振动。
二、雾化器处部系统连接下图为雾化器外部系统连接示意图。
为保证雾化器的正常运行，请注意连接的准确无误。
进料管 DN32 DIN11851 氮气出口 DN15 ISO2852 出油口内部冷却 空气出口6针 连接器10针 连接器下轴承 润滑油入口 上轴承 润滑油入口转速传感器 冷却风入口 DN40 ISO2825内部压力检测1/4 GAS氮气入口DN15 ISO2852雾化器内部冷却入口DN50 ISO28253、雾化器润滑系统示意图油壶减压阀真空泵废油口PLC 控制器油泵压缩空气入口润滑油加注口出油口 1/8”F*2供油开关电磁阀机油滤清器4、润滑系统与雾化器连接示意图接压缩空气到雾化器出油口使用时，实际供油量应根据雾化器的工作状态来进行调5、雾化器冷却系统：在雾化器使用过程中，由于调整旋转的传动带及内部的轴承会产生大量的热量，同时物料及进风温度也会导致雾化器温度升高。
3m测试片操作手册
细菌总数测试片该手册能指导你熟练掌握3M TM Petrifilm Aerobie Count Plants的使用，你可与3M微生物产品代理接洽会得到更多的信息。
[贮藏]1、未开封时，冷藏于≤8℃（≤46℉），并在保存期内用完，高温度时，凝固水可以排除，包装物最好于室温启开。
2、已开封的，将封口以胶带封紧。
3、保存再封的袋于≤25℃（≤77℉）和温度<50％，不要冷藏已开启的包装袋，并于一个月内使用完。
[样品制备]4、制备1：10和更大稀释的食物样品稀释液，0称取或吸取食物样品，置入适宜的无菌容器内，如均质袋、稀释瓶、WhirlPak bag 或者其他灭菌容器内.5、加入适量的无菌稀释液,包括Buffered peptonephopsphate buffer ,用0.0425g/L的KH2PO4调PH7.2) 、0.1%的蛋白胶水(ISO方法6887) 、缓冲蛋白胶水(ISO方法6579) 、盐溶液(0.85-0.90%)、bisulfite-free letheenbroth或蒸馏水.6、搅拌或均质样品。
[接种]7、将测试片置于平坦表面处，揭开上层膜。
8、使用吸管将1mL样液垂直滴加在测试片的中央处。
9、允许使用上层膜直接落下，切勿向下滚动上层膜。
10、使用压板隆起面底朝下，放置在上层膜中央处。
11、轻轻的压下，使样液均匀覆盖于圆形的培养面积上，切勿扭转压板。
12、拿起压板，静置至少1分钟以使培养基凝固。
[培养][解释]13、测试片的透明面朝上，可堆叠至20片，对有一定湿度养箱能保持最少份损失是需要的。
14、可目视及用标准菌落计数器或其它的照明放大镜计数，并可参考判读卡计算菌落数。
15、可以分离菌落作进一步鉴定，即掀起上层膜，由培养胶上判读卡Aerobic bacteria count=152测试片中含有一种红色指示染剂可使菌落着色,计算所有红色菌落(不论其大小和颜色深浅均计算之).Count=0在petrifilm AC测试片上,很容易解释,图2测试片上没有任何菌落生长.Count=16图3示有不多的菌落.Count=143Petrifilm AC测试片菌落数适宜计数范围是25-250,见图4Count=560测试片面积约为20cm2,当菌落数超过250个,如图5所示,为了估计菌落数,可选择其中一个或数个有代表性菌落的小方格(1cm2),计算平均菌落数,再乘以20可得到整个测试片上的菌落数.Count=tntc(estimated count=103)图6所示petrifilm AC测试片上菌落太多而无法计数(tntc)count=tntc(Estimated count=105)有很多高数量菌落,使整个生长区变粉色,如图7所示,你仅可在生长区边缘现观察到单个菌落,应计录为菌落太多无法计数(TNTC)count=tntc(Estimated count=103)有时菌落分布出现不均衡,如图8所示,这也记录为TNTC.Count=tntc(Estimated count=107)在图9中petrifilm AC测试片上的菌落,最先粗略一看是可计数的,然而,你密切注意到生长区边缘,能看到高密度的菌落,应记录为TNTC Estimated count=160很少数菌种会液化petrifilm AC测试片上的培养基,如图10所示.若有这种现象发生,可选择没有液化区的几个有代表性菌落的小方格(1cm2),计算平均菌落数.不要计数液化区内的红点.Count=83因为在petrifilm AC测试片上菌落是红色的,你会和不透明的不规则形状的事物颗粒区分开,见圆圈1和2.霉菌和酵母菌检验测试片Petrifilm and Mold count Mold TM测试片为预先制备好的培养基系统,它含有一种冷水可溶性的凝胶剂，营养基和一种指示染剂，可提供对比，利于菌落计数。
promega 实时荧光 mt 细胞活力检测试剂盒说明书
G9711, G9712 and G97132021版 CTM645原英文技术手册TM645中文说明书适用产品目录号： W6010, W6011 和 W6012Lumit™ Human IL-1βImmunoassay普洛麦格(北京)生物技术有限公司Promega (Beijing) Biotech Co., Ltd 地址：北京市东城区北三环东路36号环球贸易中心B座907-909电话：************网址：技术支持电话：400 810 8133(手机拨打)技术支持邮箱：*************************CTM6452021制作1所有技术文献的英文原版均可在/ protocols 获得。
请访问该网址以确定您使用的说明书是否为最新版本。
如果您在使用该试剂盒时有任何问题，请与Promega 北京技术服务部联系。
电子邮箱：*************************1. 产品描述 (2)2. 产品组分和储存条件 (4)3. 开始实验前 (5)4. 培养细胞的直接（无转移）方案 (7)4. A. 细胞铺板和处理 (7)4. B. 制备人IL-1β标准品稀释液 (8)4. C. 将5X抗hIL-1β抗体混合物添加至检测孔 (9)4. D. 将 Lumit™检测试剂B添加至检测孔 (10)5. 可选样品转移方案 (11)5. A. 细胞铺板和处理 (11)5. B. 制备人IL-1β标准品稀释液 (12)5. C. 将2X抗hIL-1β抗体混合物添加至样品孔 (13)5. D. 将 Lumit™检测试剂B添加至样品孔 (14)6. 结果计算 (15)7. 代表性数据 (15)8. 疑难解答 (20)9. 附录 (21)9. A. 加工后的人IL-1β选择性的示例数据 (21)9. B. 炎症小体抑制多重检测的示例数据 (22)9. C. 参考文献 (23)9. D. 相关产品 (24)Lumit™ Human IL-1β Immunoassay普洛麦格(北京)生物技术有限公司Promega (Beijing) Biotech Co., Ltd 地址：北京市东城区北三环东路36号环球贸易中心B座907-909电话：************网址：技术支持电话：400 810 8133(手机拨打)技术支持邮箱：*************************CTM6452021制作21. 产品描述Lumit™ Human IL-1β Immunoassay(a,b)是可用于检测从细胞中释放的白介素1β（IL-1β）的均质生物发光检测试剂盒，操作过程中无需样品转移或洗涤。
φ20mm-1.7M雾化片规格书
PRODUCT: PIEZOELECTRICCERAMICS TRANSDUCER M O D E L : 压电陶瓷雾化换能片Φ20MM 1.7MHz CASE1. 型号命名方法(1) (2) (3) ( 4) ( 5) (6)(1) 主称：压电陶瓷超声雾化换能片(2) 外形尺寸：圆形---φ（mm ） 矩形---长度（mm ）(3) 电极材料：G --- 不锈钢 N --- 镍 Ag --- 银 BL—玻璃釉 (4) 工作频率：（MHz ）(5) 换能片形状：A --- 圆形 E --- 矩形 (6) 序列号:1、2、3…2．测试电路3．技术指标（型号）(工作水质：自来水/饮用水)项目 Item单位 Unit 标准 Standard 测试条件(Test condition): T=25±5℃谐振频率Thick resonant frequency MHZ1.7±0.15恒压法（见以上测试线路）检验标准：全检谐振阻抗Resonant impedanceΩ≤1.5恒压法（见以上测试线路）检验标准：全检静电容量 PF 1600±20%数字电桥At 1KHZ/1VＸＹＤ ２０ Ｎ １．７ Ａ １ ＸＹＤ２０Ｎ１．７Ａ注：可根据用户要求生产起它特殊规格的产品。
4. 试验方法4．1 谐振频率及谐振阻抗的测试：测试夹具短路时调节信号发生器输出电压，使毫伏表指示值为50mV,接上雾化片，调节信号发生器的频率，使毫伏表指示最大，这时的频率为谐振频率；谐振阻抗按R＝19.3(50/E0－1)（Ω）计算。
4．2 静电容量的测试：在频率为1KHz，电压小于1V的信号下测试。
4．3 寿命试验：将产品装上雾化器，将激励电压调至24V，使雾化器正常工作并计时或采用美国军方测试压电陶瓷寿命的计算公式来测试。
5．注意事项a. 雾化片的浸水面为零电位，电极与液体不能有电位差。
b. A型不能在无水状态下使用。
WSTM01说明书
WSTM 01 - Set水 – 饱和 – 温度 – 显示器CE 2003操 作 和 保 养 手 册Version 1.1序 列 号： 修改时间：北京英特诺曼过滤器有限公司北京市朝阳区光华路 12A 号 科伦大厦 A 座 1208 室 邮编：100020 Tel. +0086 (0)10/658 141-47 Fax. +0086 (0)10/658 141-51 Email: china@ .................. 25.03.2010INTERNORMEN Technology GmbH Friedensstraße 41 Germany – 68804 Altlußheim Tel. +49 (0) 6205/2094-0 Fax. +49 (0) 6205/2094-40 Email: info@ 目 录1.1.1 1.2页3安全说明不正确操作导致的危险………………………………………………………………….. 3 依照规定进行使用……………………………………………………………………….. 32.2.1 2.2首次运行4构造……………………………………………………………………………………….. 4 完成运转前的准备……………………………………………………………………….. 43.油饱和度的检测63.1 水在液压油中造成的影响……………………………………………………………….. 6 3.2 检测原理………………………………………………………………………………….. 6 3.3 检测过程………………………………………………………………………………….. 7 3.4 对 WSTM 01 中软件的操作…………………………………………………………….. 7 3.4.1 操作键………………………………………………………………………………… 7 3.4.2 菜单结构……………………………………………………………………………… 8 3.4.3 主菜单………………………………………………………………………………… 9 3.4.3.1 步骤……………………………………………………………………………….. 9 3.4.3.1.1 设置存储时间间隔…………………………………………………………… 9 3.4.3.1.2 选择油的型号………………………………………………………………...10 3.4.3.1.3 开始…………………………………………………………………………...10 3.4.3.2 数据管理………………………………………………………………………… 11 3.4.3.2.1 数据传输…………………………………………………………………….. 11 3.4.3.2.2 数据删除…………………………………………………………………….. 12 3.4.3.2.3 数据存储…………………………………………………………………….. 12 3.4.3.3 设置……………………………………………………………………………… 12 3.4.3.3.1 极限值的设置……………………………………………………………….. 13 3.4.3.3.2 时间的设置………………………………………………………………….. 13 3.4.3.3.3 温度格式的设置…………………………………………………………….. 14 3.4.3.3.4 标准值的设置……………………………………………………………….. 14 3.5 检测结果的分析利用…………………………………………………………………… 15 3.5.1 用%形式来显示饱和度...……………………………………………………………15 3.5.2 用 ppm 形式来显示水的含量……………………………………………………….16 3.6 数据传输和数据管理…………………………………………………………………… 174.4.1WSTM 01 的保养 WSTM 01- Set 标准值的设定19 18传感器的清洁…………………………………………………………………………… 195.5.1 5.2WSPS 03 -传感器……………………………………………………………………… 19 温度探测器的安装……………………………………………………………………… 196.6.1 6.2 6.2.1 6.2.2 6.3 6.4附录20技术数据………………………………………………………………………………… 20 连接说明.............................................................................................................. 21 WSPS 03 – 湿度传感器…………………………………………………………… 21 WSTM 01 – 显示装置……………………………………………………………… 22 适用范围—兼容性................................................................................................ 24 触点负载............................................................................................................... 247.排除故障2521.1.1安全说明不正确操作导致的危险WSTM 01 – Set 通过 IEC 1010-1/ EN 61010 – 1, Teil 1 标准的安全测试和验收，有着 电子和液压一体化的保护装置，能为在规定的使用范围内提供安全运行的保障。
SMC Air Filter AF10至AF60定制规格说明说明书
Specifications
Made-to-order no. Proof pressure (MPa) Maximum operating pressure (MPa) Ambient and fluid temperature (°C)
-X425 3.0 2.0
–5 to 60 (with no freezing)
Air Filter
AF10 to AF60
Made to Order Specifications:
Please contact SMC for detailed dimensions, specifications, and lead times.
Courtesy of CMA/Flodyne/Hydradyne ▪ Motion Control ▪ Hydraulic ▪ Pneumatic ▪ Electrical ▪ Mechanical ▪ (800) 426-5480 ▪
Including 2 mounting screws Note 4) Only metal bowl 2 is available. Note 5) Without a valve function Note 6) For thread type: NPT. This product is for overseas use only according to the
new Measurement Law. (The SI unit type is provided for use in Japan.) Note 7) ć: For thread type: NPT only
indicate in alphanumeric order. Example) AF30-03B-2R-X425